Skip to contentSkip to conversation

dt-bindings: devantech-srf04.yaml: add pm feature

PATCH In review Andreas Klinger 2 participants 2 messages Jan 20, 2020 – Feb 2, 2020

Subsystems (2)
Device tree bindings IIO
lore
Share & tools
lore

Andreas Klinger

author
#0 lore raw

PATCH v3 1/2 dt-bindings: devantech-srf04.yaml: add pm feature

Add GPIO line and startup time for usage of power management

Reviewed-by Rob Herring <[email protected]>
Signed-off-by Andreas Klinger <[email protected]>
---
 .../iio/proximity/devantech-srf04.yaml         | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +18 -0
index 4e80ea7c1475..8afbac24c34e 100644
@@ -51,6 +51,24 @@ properties:
       the time between two interrupts is measured in the driver.
     maxItems: 1
 
+  power-gpios:
+    description:
+      Definition of the GPIO for power management of connected peripheral
+      (output).
+      This GPIO can be used by the external hardware for power management.
+      When the device gets suspended it's switched off and when it resumes
+      it's switched on again. After some period of inactivity the driver
+      get suspended automatically (autosuspend feature).
+    maxItems: 1
+
+  startup-time-ms:
+    description:
+      This is the startup time the device needs after a resume to be up and
+      running.
+    minimum: 0
+    maximum: 1000
+    default: 100
+
 required:
   - compatible
   - trig-gpios
Signature · 1 line
2.20.1
maintainer
#1 lore raw
Quoted 4 lines · On Mon, 20 Jan 2020 17:44:55 +0100 Andreas Klinger <[email protected]> wrote:

Add GPIO line and startup time for usage of power management

Reviewed-by Rob Herring <[email protected]>
Signed-off-by Andreas Klinger <[email protected]>

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it.

Thanks,

Jonathan

Quoted 33 lines
---
 .../iio/proximity/devantech-srf04.yaml         | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +18 -0
index 4e80ea7c1475..8afbac24c34e 100644
@@ -51,6 +51,24 @@ properties:
       the time between two interrupts is measured in the driver.
     maxItems: 1
 
+  power-gpios:
+    description:
+      Definition of the GPIO for power management of connected peripheral
+      (output).
+      This GPIO can be used by the external hardware for power management.
+      When the device gets suspended it's switched off and when it resumes
+      it's switched on again. After some period of inactivity the driver
+      get suspended automatically (autosuspend feature).
+    maxItems: 1
+
+  startup-time-ms:
+    description:
+      This is the startup time the device needs after a resume to be up and
+      running.
+    minimum: 0
+    maximum: 1000
+    default: 100
+
 required:
   - compatible
   - trig-gpios