Skip to contentSkip to conversation

ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK

PATCH RESEND Superseded Marek Vasut 2 participants 3 messages Jan 20, 2020 – Jan 21, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK

From: Arkadiusz Karas <[email protected]>

Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port.

---
NOTE: There are other variants and options of the VisionSOM available:
- iMX6UL instead of iMX6ULL
- NAND can be populated (optional, easy to add support for)
- eMMC can be populated (optional, easy to add support for)

---
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/imx6ull-somlabs-visionsom.dts    | 276 ++++++++++++++++++
 arch/arm/mach-imx/mx6/Kconfig                 |  13 +
 board/somlabs/visionsom-6ull/Kconfig          |  12 +
 board/somlabs/visionsom-6ull/MAINTAINERS      |   6 +
 board/somlabs/visionsom-6ull/Makefile         |   4 +
 board/somlabs/visionsom-6ull/imximage.cfg     | 107 +++++++
 board/somlabs/visionsom-6ull/visionsom-6ull.c | 146 +++++++++
 configs/somlabs_visionsom_6ull_defconfig      |  49 ++++
 include/configs/somlabs_visionsom_6ull.h      | 116 ++++++++
 10 files changed, 730 insertions(+)
 create mode 100644 arch/arm/dts/imx6ull-somlabs-visionsom.dts
 create mode 100644 board/somlabs/visionsom-6ull/Kconfig
 create mode 100644 board/somlabs/visionsom-6ull/MAINTAINERS
 create mode 100644 board/somlabs/visionsom-6ull/Makefile
 create mode 100644 board/somlabs/visionsom-6ull/imximage.cfg
 create mode 100644 board/somlabs/visionsom-6ull/visionsom-6ull.c
 create mode 100644 configs/somlabs_visionsom_6ull_defconfig
 create mode 100644 include/configs/somlabs_visionsom_6ull.h
arch/arm/dts/Makefile +1 -0
index 04a8cccda5..b2f127d398 100644
@@ -676,6 +676,7 @@ dtb-$(CONFIG_MX6ULL) += \
 	imx6ull-colibri.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
 	imx6ull-dart-6ul.dtb \
+	imx6ull-somlabs-visionsom.dtb \
 	imx6ulz-14x14-evk.dtb
 
 dtb-$(CONFIG_ARCH_MX6) += \
arch/arm/dts/imx6ull-somlabs-visionsom.dts new file +276 -0

276 lines not on this page · raw message

arch/arm/mach-imx/mx6/Kconfig +13 -0
index f1a1021f10..9d91f9ab44 100644
@@ -540,6 +540,18 @@ config TARGET_SKSIMX6
 	bool "sks-imx6"
 	select SUPPORT_SPL
 
+config TARGET_SOMLABS_VISIONSOM_6ULL
+	bool "visionsom-6ull"
+	select MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	imply CMD_DM
+
 config TARGET_TBS2910
 	bool "TBS2910 Matrix ARM mini PC"
 
@@ -694,6 +706,7 @@ source "board/logicpd/imx6/Kconfig"
 source "board/seco/Kconfig"
 source "board/sks-kinkel/sksimx6/Kconfig"
 source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/somlabs/visionsom-6ull/Kconfig"
 source "board/technexion/pico-imx6/Kconfig"
 source "board/technexion/pico-imx6ul/Kconfig"
 source "board/tbs/tbs2910/Kconfig"
board/somlabs/visionsom-6ull/Kconfig new file +12 -0
new file mode 100644
index 0000000000..37408aa798
@@ -0,0 +1,12 @@
+if TARGET_SOMLABS_VISIONSOM_6ULL
+
+config SYS_BOARD
+	default "visionsom-6ull"
+
+config SYS_VENDOR
+	default "somlabs"
+
+config SYS_CONFIG_NAME
+	default "somlabs_visionsom_6ull"
+
+endif
board/somlabs/visionsom-6ull/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..905c000bc4
@@ -0,0 +1,6 @@
+VISIONSOM-6ULL BOARD
+M:	Arkadiusz Karas <[email protected]>
+S:	Maintained
+F:	board/somlabs/visionsom-6ull/
+F:	include/configs/somlabs_visionsom_6ull.h
+F:	configs/somlabs_visionsom_6ull_defconfig
board/somlabs/visionsom-6ull/Makefile new file +4 -0
new file mode 100644
index 0000000000..9c3768aa45
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+# (C) Copyright 2019 Arkadiusz Karas <[email protected]>
+
+obj-y  := visionsom-6ull.o
board/somlabs/visionsom-6ull/imximage.cfg new file +107 -0

107 lines not on this page · raw message

board/somlabs/visionsom-6ull/visionsom-6ull.c new file +146 -0

146 lines not on this page · raw message

configs/somlabs_visionsom_6ull_defconfig new file +49 -0

49 lines not on this page · raw message

include/configs/somlabs_visionsom_6ull.h new file +116 -0

116 lines not on this page · raw message

Signature · 1 line
2.24.1
#1 lore raw

PATCH RESEND 1/1 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK

Hi Marek,

Quoted 6 lines · Marek Vasut

From: Arkadiusz Karas <[email protected]>

Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port.

Patch was already applied to u-boot-imx, -master. I could not find it in patchwork, that's the reason you did not get an e-mail of confirmation.

Regards,
Stefano

Quoted 837 lines

---
NOTE: There are other variants and options of the VisionSOM available:
- iMX6UL instead of iMX6ULL
- NAND can be populated (optional, easy to add support for)
- eMMC can be populated (optional, easy to add support for)

---
 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/imx6ull-somlabs-visionsom.dts    | 276 ++++++++++++++++++
 arch/arm/mach-imx/mx6/Kconfig                 |  13 +
 board/somlabs/visionsom-6ull/Kconfig          |  12 +
 board/somlabs/visionsom-6ull/MAINTAINERS      |   6 +
 board/somlabs/visionsom-6ull/Makefile         |   4 +
 board/somlabs/visionsom-6ull/imximage.cfg     | 107 +++++++
 board/somlabs/visionsom-6ull/visionsom-6ull.c | 146 +++++++++
 configs/somlabs_visionsom_6ull_defconfig      |  49 ++++
 include/configs/somlabs_visionsom_6ull.h      | 116 ++++++++
 10 files changed, 730 insertions(+)
 create mode 100644 arch/arm/dts/imx6ull-somlabs-visionsom.dts
 create mode 100644 board/somlabs/visionsom-6ull/Kconfig
 create mode 100644 board/somlabs/visionsom-6ull/MAINTAINERS
 create mode 100644 board/somlabs/visionsom-6ull/Makefile
 create mode 100644 board/somlabs/visionsom-6ull/imximage.cfg
 create mode 100644 board/somlabs/visionsom-6ull/visionsom-6ull.c
 create mode 100644 configs/somlabs_visionsom_6ull_defconfig
 create mode 100644 include/configs/somlabs_visionsom_6ull.h
arch/arm/dts/Makefile +1 -0
index 04a8cccda5..b2f127d398 100644
@@ -676,6 +676,7 @@ dtb-$(CONFIG_MX6ULL) += \
 	imx6ull-colibri.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
 	imx6ull-dart-6ul.dtb \
+	imx6ull-somlabs-visionsom.dtb \
 	imx6ulz-14x14-evk.dtb
 
 dtb-$(CONFIG_ARCH_MX6) += \
arch/arm/dts/imx6ull-somlabs-visionsom.dts new file +276 -0
new file mode 100644
index 0000000000..868f3f8440
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2019 SoMLabs
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "SoMLabs VisionSOM-6ULL";
+	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usr0 {
+			label = "usr0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1 {
+			label = "usr1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		usr2 {
+			label = "usr2";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+
+		usr3 {
+			label = "usr3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+};
+
+&cpu0 {
+	arm-supply = <&reg_arm>;
+	soc-supply = <&reg_soc>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy at 1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+
+};
+
+&gpc {
+	fsl,cpu_pupscr_sw2iso = <0x1>;
+	fsl,cpu_pupscr_sw = <0x0>;
+	fsl,cpu_pdnscr_iso2sw = <0x1>;
+	fsl,cpu_pdnscr_iso = <0x1>;
+	fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			/* 32kHz low power reference clock for WiFi */
+			MX6UL_PAD_JTAG_TCK__OSC32K_32K_OUT	0x17099
+			/* LED 0..3 */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x17099
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x17099
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x17099
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x17099
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1F829
+
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x400010a9
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY	0x30b0
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x10b0
+		>;
+	};
+
+	pinctrl_usb_otg2: usbotg2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x10b0
+		>;
+	};
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	tx-d-cal = <0x5>;
+};
+
+&usdhc2 {
+	non-removable;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,wdog_b;
+};
arch/arm/mach-imx/mx6/Kconfig +13 -0
index f1a1021f10..9d91f9ab44 100644
@@ -540,6 +540,18 @@ config TARGET_SKSIMX6
 	bool "sks-imx6"
 	select SUPPORT_SPL
 
+config TARGET_SOMLABS_VISIONSOM_6ULL
+	bool "visionsom-6ull"
+	select MX6ULL
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_MMC
+	select DM_SERIAL
+	select DM_THERMAL
+	imply CMD_DM
+
 config TARGET_TBS2910
 	bool "TBS2910 Matrix ARM mini PC"
 
@@ -694,6 +706,7 @@ source "board/logicpd/imx6/Kconfig"
 source "board/seco/Kconfig"
 source "board/sks-kinkel/sksimx6/Kconfig"
 source "board/solidrun/mx6cuboxi/Kconfig"
+source "board/somlabs/visionsom-6ull/Kconfig"
 source "board/technexion/pico-imx6/Kconfig"
 source "board/technexion/pico-imx6ul/Kconfig"
 source "board/tbs/tbs2910/Kconfig"
board/somlabs/visionsom-6ull/Kconfig new file +12 -0
new file mode 100644
index 0000000000..37408aa798
@@ -0,0 +1,12 @@
+if TARGET_SOMLABS_VISIONSOM_6ULL
+
+config SYS_BOARD
+	default "visionsom-6ull"
+
+config SYS_VENDOR
+	default "somlabs"
+
+config SYS_CONFIG_NAME
+	default "somlabs_visionsom_6ull"
+
+endif
board/somlabs/visionsom-6ull/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..905c000bc4
@@ -0,0 +1,6 @@
+VISIONSOM-6ULL BOARD
+M:	Arkadiusz Karas <[email protected]>
+S:	Maintained
+F:	board/somlabs/visionsom-6ull/
+F:	include/configs/somlabs_visionsom_6ull.h
+F:	configs/somlabs_visionsom_6ull_defconfig
board/somlabs/visionsom-6ull/Makefile new file +4 -0
new file mode 100644
index 0000000000..9c3768aa45
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+# (C) Copyright 2019 Arkadiusz Karas <[email protected]>
+
+obj-y  := visionsom-6ull.o
board/somlabs/visionsom-6ull/imximage.cfg new file +107 -0
new file mode 100644
index 0000000000..b49a2df6dd
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 A. Karas
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : sd
+ */
+
+BOOT_FROM	sd
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_IMX_HAB
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Micron MT41K256M16TW-107 */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x00000030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000000
+DATA 4 0x021B083C 0x41570155
+DATA 4 0x021B0848 0x4040474A
+DATA 4 0x021B0850 0x40405550
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00921012
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x1B333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D0B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B0890 0x23400A38
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
board/somlabs/visionsom-6ull/visionsom-6ull.c new file +146 -0
new file mode 100644
index 0000000000..bc7257be40
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2019 A. Karas, SomLabs
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ */
+
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <env.h>
+#include <fsl_esdhc_imx.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FEC_MXC
+static int setup_fec(void)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	/*
+	 * Use 50M anatop loopback REF_CLK1 for ENET1,
+	 * clear gpr1[13], set gpr1[17].
+	 */
+	clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+			IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+
+	ret = enable_fec_anatop_clock(0, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	enable_enet_clk(1);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+int board_mmc_get_env_dev(int devno)
+{
+	return devno;
+}
+
+int mmc_map_to_kernel_blk(int devno)
+{
+	return devno;
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_SYS_I2C
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd1", MAKE_CFGVAL(0x42, 0x20, 0x00, 0x00)},
+	{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	if (is_cpu_type(MXC_CPU_MX6ULL))
+		env_set("board", "visionsom-6ull");
+	else
+		env_set("board", "visionsom-6ul");
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: SoMLabs VisionSOM-6UL%s\n",
+	       is_cpu_type(MXC_CPU_MX6ULL) ? "L" : "");
+
+	return 0;
+}
configs/somlabs_visionsom_6ull_defconfig new file +49 -0
new file mode 100644
index 0000000000..e39c03573a
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TARGET_SOMLABS_VISIONSOM_6ULL=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xC0000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/somlabs/visionsom-6ull/imximage.cfg"
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-somlabs-visionsom"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_LZO=y
+# CONFIG_EFI_LOADER is not set
include/configs/somlabs_visionsom_6ull.h new file +116 -0
new file mode 100644
index 0000000000..6759f24c08
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2019 A. Karas, SomLabs
+ * Copyright (C) 2015-2016 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the SoMlabs VisionSOM 6ULL board.
+ */
+#ifndef __SOMLABS_VISIONSOM_6ULL_H
+#define __SOMLABS_VISIONSOM_6ULL_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+#include <asm/mach-imx/gpio.h>
+
+/* SPL options */
+#include "imx6_spl.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* MMC Configs */
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+
+#define CONFIG_SYS_FSL_USDHC_NUM	1
+#endif /* CONFIG_FSL_USDHC */
+
+#define CONFIG_CMD_READ
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"bootm_size=0x10000000\0" \
+	"console=ttymxc0\0" \
+	"initrd_addr=0x86800000\0" \
+	"fdt_addr=0x83000000\0" \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"splashimage=0x80000000\0" \
+	"splashfile=/boot/splash.bmp\0" \
+	"mmcdev=1\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+	"setrootmmc=setenv rootspec root=${mmcroot}\0" \
+	"setbootscriptmmc=setenv loadbootscript " \
+		"load mmc ${mmcdev}:${mmcpart} " \
+		"${loadaddr} /boot/${script};\0" \
+	"setloadmmc=setenv loadimage load mmc ${mmcdev}:${mmcpart} " \
+		"${loadaddr} /boot/${image}; " \
+		"setenv loadfdt load mmc ${mmcdev}:${mmcpart} " \
+		"${fdt_addr} /boot/${fdt_file};\0" \
+	"setbootargs=setenv bootargs console=${console},${baudrate} " \
+		"${rootspec}\0" \
+	"execbootscript=echo Running bootscript...; source\0" \
+	"setfdtfile=setenv fdt_file somlabs-visionsom-6ull.dtb\0" \
+	"checkbootdev=run setbootscriptmmc; " \
+		"run setrootmmc; " \
+		"run setloadmmc; " \
+
+#define CONFIG_BOOTCOMMAND \
+	"run setfdtfile; " \
+	"run checkbootdev; " \
+	"run loadfdt;" \
+	"if run loadbootscript; then " \
+		"run bootscript; " \
+	"else " \
+		"if run loadimage; then " \
+			"run setbootargs; " \
+			"bootz ${loadaddr} - ${fdt_addr}; " \
+		"fi; " \
+	"fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* environment organization */
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR		0x1
+#define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"eth0"
+#endif
+
+#define CONFIG_IMX_THERMAL
+
+#endif
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#2 lore raw

PATCH RESEND 1/1 ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVK

Quoted 1 line · Stefano Babic

Hi Marek,

Hi,

Quoted 10 lines · Marek Vasut
Quoted 6 lines

From: Arkadiusz Karas <[email protected]>

Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port.

Patch was already applied to u-boot-imx, -master. I could not find it in patchwork, that's the reason you did not get an e-mail of confirmation.

I have a feeling I hit some gap when the ML setup was being updated. Anyway, thanks.

Signature · 2 lines
Best regards,
Marek Vasut