keytable: support 64 bit scancodes
Subsystems (2)
Sean Young
maintainerPATCH 1/4 keytable: support 64 bit scancodes
--- utils/common/keymap.c | 4 +- utils/common/keymap.h | 4 +- utils/keytable/keytable.c | 80 +++++++++++++++++++++++++++------------ 3 files changed, 59 insertions(+), 29 deletions(-)
utils/common/keymap.c +2 -2
@@ -162,7 +162,7 @@ static error_t parse_plain_keymap(char *fname, struct keymap **keymap, bool verbreturn ENOMEM ; } - se->scancode =strtoul (scancode,NULL ,0 ); + se->scancode =strtoull (scancode,NULL ,0 ); se->keycode =strdup (keycode); se->next = map->scancode; map->scancode = se;
@@ -442,7 +442,7 @@ static error_t parse_toml_protocol(const char *fname, struct toml_table_t *prootreturn ENOMEM ; } - se->scancode =strtoul (scancode,NULL ,0 ); + se->scancode =strtoull (scancode,NULL ,0 ); se->keycode = keycode; *next = se; next = &se->next;
utils/common/keymap.h +2 -2
@@ -20,13 +20,13 @@ struct protocol_param {struct scancode_entry {struct scancode_entry *next; -u_int32_t scancode; +u_int64_t scancode;char *keycode; };struct raw_entry {struct raw_entry *next; -u_int32_t scancode; +u_int64_t scancode;u_int32_t raw_length;char *keycode;u_int32_t raw[1 ];
utils/keytable/keytable.c +55 -25
153 lines not on this page · raw message
Signature · 1 line
2.24.1
Sean Young
maintainerPATCH v2 1/1 media: rc: make scancodes 64 bit
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now.
The MSC_SCAN event can only contain 32 bit scancodes, so we no longer generate these input events. The full 64 bit scancode can be read from the lirc chardev.
--- drivers/media/rc/bpf-lirc.c | 5 --- drivers/media/rc/lirc_dev.c | 7 +--- drivers/media/rc/rc-main.c | 77 ++++++++++++++++++++++++------------- include/media/rc-core.h | 8 ++-- include/media/rc-map.h | 4 +- 5 files changed, 58 insertions(+), 43 deletions(-)
drivers/media/rc/bpf-lirc.c +0 -5
@@ -35,11 +35,6 @@ static const struct bpf_func_proto rc_repeat_proto = { .arg1_type = ARG_PTR_TO_CTX, }; -/* -* Currently rc-core does not support 64-bit scancodes, but there are many -* known protocols with more than 32 bits. So, define the interface as u64 -* as a future-proof. -*/ BPF_CALL_4(bpf_rc_keydown, u32*, sample, u32, protocol, u64, scancode, u32, toggle) {
drivers/media/rc/lirc_dev.c +1 -6
@@ -269,12 +269,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, goto out_unlock; } -/* -* The scancode field in lirc_scancode is 64-bit simply -* to future-proof it, since there are IR protocols encode -* use more than 32 bits. For now only 32-bit protocols -* are supported. -*/ +/* We only have encoders for 32-bit protocols. */ if (scan.scancode >U32_MAX || !rc_validate_scancode (scan.rc_proto, scan.scancode)) { ret = -EINVAL ;
drivers/media/rc/rc-main.c +51 -26
202 lines not on this page · raw message
include/media/rc-core.h +4 -4
@@ -192,7 +192,7 @@ struct rc_dev {struct timer_list timer_repeat;u32 last_keycode;enum rc_proto last_protocol; -u32 last_scancode; +u64 last_scancode;u8 last_toggle;u32 timeout;u32 min_timeout;
@@ -284,12 +284,12 @@ int devm_rc_register_device(struct device *parent, struct rc_dev *dev);void rc_unregister_device (struct rc_dev *dev);void rc_repeat (struct rc_dev *dev); -void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u32 scancode, +void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u64 scancode,u8 toggle);void rc_keydown_notimeout (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u8 toggle); +u64 scancode,u8 toggle);void rc_keyup (struct rc_dev *dev); -u32 rc_g_keycode_from_table (struct rc_dev *dev,u32 scancode); +u32 rc_g_keycode_from_table (struct rc_dev *dev,u64 scancode);/* * From rc-raw.c
include/media/rc-map.h +2 -2
@@ -85,11 +85,11 @@/** * struct rc_map_table - represents a scancode/keycode pair * -* @scancode: scan code (u32) +* @scancode: scan code (u64) * @keycode: Linux input keycode */ struct rc_map_table { -u32 scancode; +u64 scancode;u32 keycode; };
Signature · 1 line
2.24.1
Re: [PATCH v2] media: rc: make scancodes 64 bit
Hi Sean,
Em Wed, 29 Jan 2020 11:54:16 +0000
Sean Young <[email protected]> escreveu:
Quoted 3 lines
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now.
Since the beginning, the goal were to support longer scancodes. When we designed the RC subsystem, we were even expecting longer codes[1].
[1] RC6 mode 6A scancode may have, according to the specs, up to 128 bits. At the time we added the RC subsystem, RC6 were brand new, so we opted to be more conservative. That's said, I never found myself any implementation with more than 64 bits for scancodes.
That's why we added the EVIOCGKEYCODE_V2, with uses:
struct input_keymap_entry {
#define INPUT_KEYMAP_BY_INDEX (1 << 0) __u8 flags; __u8 len; __u16 index; __u32 keycode; __u8 scancode[32]; };
capable of storing scancodes up to 256 bits. The way the code is written at the Kernel, is even possible to extend it further if ever needed.
The reason why we don't properly support 64 bits yet [2] is that it requires some changes in order to provide a backward-compatible set of functions.
[2] Actually, I guess we have one driver with has 64 bits scancodes.
A proper patchset should likely modify also the code under drivers/input, and needs to be submitted against input/evdev tree.
Quoted 4 lines
The
MSC_SCANevent can only contain 32 bit scancodes, so we no longer generate these input events. The full 64 bit scancode can be read from the lirc chardev.
For example, if all possible scancodes are <= 32 bit, it should still generate MSC_SCAN, as otherwise existing tools that rely on it will break.
Quoted 307 lines
Signed-off-by Sean Young <[email protected]>--- drivers/media/rc/bpf-lirc.c | 5 --- drivers/media/rc/lirc_dev.c | 7 +--- drivers/media/rc/rc-main.c | 77 ++++++++++++++++++++++++------------- include/media/rc-core.h | 8 ++-- include/media/rc-map.h | 4 +- 5 files changed, 58 insertions(+), 43 deletions(-)drivers/media/rc/bpf-lirc.c +0
-5@@ -35,11 +35,6 @@ static const struct bpf_func_proto rc_repeat_proto = { .arg1_type = ARG_PTR_TO_CTX, }; -/* -* Currently rc-core does not support 64-bit scancodes, but there are many -* known protocols with more than 32 bits. So, define the interface as u64 -* as a future-proof. -*/ BPF_CALL_4(bpf_rc_keydown, u32*, sample, u32, protocol, u64, scancode, u32, toggle) {drivers/media/rc/lirc_dev.c +1
-6@@ -269,12 +269,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, goto out_unlock; } -/* -* The scancode field in lirc_scancode is 64-bit simply -* to future-proof it, since there are IR protocols encode -* use more than 32 bits. For now only 32-bit protocols -* are supported. -*/ +/* We only have encoders for 32-bit protocols. */ if (scan.scancode >U32_MAX || !rc_validate_scancode (scan.rc_proto, scan.scancode)) { ret = -EINVAL ;drivers/media/rc/rc-main.c +51
-26@@ -163,6 +163,41 @@ static struct rc_map_list empty_map = { } }; +/** +* scancode_to_u64() - converts scancode in &struct input_keymap_entry +* @ke: keymap entry containing scancode to be converted. +* @scancode: pointer to the location where converted scancode should +* be stored. +* +* This function is a version of input_scancode_to_scalar specialized for +* rc-core. +*/ +static int scancode_to_u64 (const struct input_keymap_entry *ke,u64 *scancode) +{ +switch (ke->len) { +case 1 : + *scancode = *((u8 *)ke->scancode); +break ; + +case 2 : + *scancode = *((u16 *)ke->scancode); +break ; + +case 4 : + *scancode = *((u32 *)ke->scancode); +break ; + +case 8 : + *scancode = *((u64 *)ke->scancode); +break ; + +default : +return -EINVAL ; + } + +return 0 ; +} +/** * ir_create_table() - initializes a scancode table * @dev: the rc_dev device @@ -285,13 +320,13 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,/* Did the user wish to remove the mapping? */ if (new_keycode ==KEY_RESERVED || new_keycode ==KEY_UNKNOWN ) { -dev_dbg (&dev->dev,"#%d: Deleting scan 0x%04x\n" , +dev_dbg (&dev->dev,"#%d: Deleting scan 0x%04llx\n" , index, rc_map->scan[index].scancode); rc_map->len--;memmove (&rc_map->scan[index], &rc_map->scan[index+1 ], (rc_map->len - index) *sizeof (struct rc_map_table )); }else { -dev_dbg (&dev->dev,"#%d: %s scan 0x%04x with key 0x%04x\n" , +dev_dbg (&dev->dev,"#%d: %s scan 0x%04llx with key 0x%04x\n" , index, old_keycode ==KEY_RESERVED ?"New" :"Replacing" , rc_map->scan[index].scancode, new_keycode);@@ -334,8 +369,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,*/ static unsigned int ir_establish_scancode (struct rc_dev *dev,struct rc_map *rc_map, -unsigned int scancode, -bool resize) +u64 scancode,bool resize) {unsigned int i;@@ -394,7 +428,7 @@ static int ir_setkeycode(struct input_dev *idev,struct rc_dev *rdev =input_get_drvdata (idev);struct rc_map *rc_map = &rdev->rc_map;unsigned int index; -unsigned int scancode; +u64 scancode;int retval =0 ;unsigned long flags;@@ -407,7 +441,7 @@ static int ir_setkeycode(struct input_dev *idev, goto out; } }else { - retval =input_scancode_to_scalar (ke, &scancode); + retval =scancode_to_u64 (ke, &scancode);if (retval) goto out;@@ -434,8 +468,7 @@ static int ir_setkeycode(struct input_dev *idev,* * return: -ENOMEM if all keycodes could not be inserted, otherwise zero. */ -static int ir_setkeytable (struct rc_dev *dev, -const struct rc_map *from) +static int ir_setkeytable (struct rc_dev *dev,const struct rc_map *from) {struct rc_map *rc_map = &dev->rc_map;unsigned int i, index;@@ -466,7 +499,7 @@ static int ir_setkeytable(struct rc_dev *dev,static int rc_map_cmp (const void *key,const void *elt) { -const unsigned int *scancode = key; +const u64 *scancode = key;const struct rc_map_table *e = elt;if (*scancode < e->scancode)@@ -487,7 +520,7 @@ static int rc_map_cmp(const void *key, const void *elt)* return: index in the table, -1U if not found */ static unsigned int ir_lookup_by_scancode (const struct rc_map *rc_map, -unsigned int scancode) +u64 scancode) {struct rc_map_table *res;@@ -516,7 +549,7 @@ static int ir_getkeycode(struct input_dev *idev,struct rc_map_table *entry;unsigned long flags;unsigned int index; -unsigned int scancode; +u64 scancode;int retval;spin_lock_irqsave (&rc_map->lock, flags);@@ -524,7 +557,7 @@ static int ir_getkeycode(struct input_dev *idev,if (ke->flags &INPUT_KEYMAP_BY_INDEX ) { index = ke->index; }else { - retval =input_scancode_to_scalar (ke, &scancode); + retval =scancode_to_u64 (ke, &scancode);if (retval) goto out;@@ -538,7 +571,6 @@ static int ir_getkeycode(struct input_dev *idev, ke->keycode = entry->keycode; ke->len =sizeof (entry->scancode);memcpy (ke->scancode, &entry->scancode,sizeof (entry->scancode)); - }else if (!(ke->flags &INPUT_KEYMAP_BY_INDEX )) {/* * We do not really know the valid range of scancodes @@ -570,7 +602,7 @@ static int ir_getkeycode(struct input_dev *idev,* * return: the corresponding keycode, or KEY_RESERVED */ -u32 rc_g_keycode_from_table (struct rc_dev *dev,u32 scancode) +u32 rc_g_keycode_from_table (struct rc_dev *dev,u64 scancode) {struct rc_map *rc_map = &dev->rc_map;unsigned int keycode;@@ -586,7 +618,7 @@ u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)spin_unlock_irqrestore (&rc_map->lock, flags);if (keycode !=KEY_RESERVED ) -dev_dbg (&dev->dev,"%s: scancode 0x%04x keycode 0x%02x\n" , +dev_dbg (&dev->dev,"%s: scancode 0x%04llx keycode 0x%02x\n" , dev->device_name, scancode, keycode);return keycode;@@ -719,9 +751,6 @@ void rc_repeat(struct rc_dev *dev)spin_lock_irqsave (&dev->keylock, flags); -input_event (dev->input_dev,EV_MSC ,MSC_SCAN , dev->last_scancode); -input_sync (dev->input_dev); -if (dev->keypressed) { dev->keyup_jiffies = jiffies + timeout;mod_timer (&dev->timer_keyup, dev->keyup_jiffies);@@ -743,7 +772,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);* called with keylock held. */ static void ir_do_keydown (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u32 keycode,u8 toggle) +u64 scancode,u32 keycode,u8 toggle) { bool new_event = (!dev->keypressed || dev->last_protocol != protocol ||@@ -761,8 +790,6 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,if (new_event && dev->keypressed)ir_do_keyup (dev, false); -input_event (dev->input_dev,EV_MSC ,MSC_SCAN , scancode); - dev->last_protocol = protocol; dev->last_scancode = scancode; dev->last_toggle = toggle;@@ -772,7 +799,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,/* Register a keypress */ dev->keypressed = true; -dev_dbg (&dev->dev,"%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n" , +dev_dbg (&dev->dev,"%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08llx\n" , dev->device_name, keycode, protocol, scancode);input_report_key (dev->input_dev, keycode,1 );@@ -809,7 +836,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,* This routine is used to signal that a key has been pressed on the * remote control. */ -void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u32 scancode, +void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u64 scancode,u8 toggle) {unsigned long flags;@@ -840,7 +867,7 @@ EXPORT_SYMBOL_GPL(rc_keydown);* remote control. The driver must manually call rc_keyup() at a later stage. */ void rc_keydown_notimeout (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u8 toggle) +u64 scancode,u8 toggle) {unsigned long flags;u32 keycode =rc_g_keycode_from_table (dev, scancode);@@ -1769,8 +1796,6 @@ static int rc_prepare_rx_device(struct rc_dev *dev)/* Keyboard events */ set_bit (EV_KEY , dev->input_dev->evbit);set_bit (EV_REP , dev->input_dev->evbit); -set_bit (EV_MSC , dev->input_dev->evbit); -set_bit (MSC_SCAN , dev->input_dev->mscbit);/* Pointer/mouse events */ set_bit (INPUT_PROP_POINTING_STICK , dev->input_dev->propbit);include/media/rc-core.h +4
-4@@ -192,7 +192,7 @@ struct rc_dev {struct timer_list timer_repeat;u32 last_keycode;enum rc_proto last_protocol; -u32 last_scancode; +u64 last_scancode;u8 last_toggle;u32 timeout;u32 min_timeout;@@ -284,12 +284,12 @@ int devm_rc_register_device(struct device *parent, struct rc_dev *dev);void rc_unregister_device (struct rc_dev *dev);void rc_repeat (struct rc_dev *dev); -void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u32 scancode, +void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u64 scancode,u8 toggle);void rc_keydown_notimeout (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u8 toggle); +u64 scancode,u8 toggle);void rc_keyup (struct rc_dev *dev); -u32 rc_g_keycode_from_table (struct rc_dev *dev,u32 scancode); +u32 rc_g_keycode_from_table (struct rc_dev *dev,u64 scancode);/* * From rc-raw.c include/media/rc-map.h +0
-0@@ -85,11 +85,11 @@/** * struct rc_map_table - represents a scancode/keycode pair *
include/media/rc-map.h line 95
Quoted 10 lines
include/media/rc-map.h +2
-2-* @scancode: scan code (u32) +* @scancode: scan code (u64) * @keycode: Linux input keycode */ struct rc_map_table { -u32 scancode; +u64 scancode;u32 keycode; };
Thanks,
Mauro
Sean Young
maintainerRe: [PATCH v2] media: rc: make scancodes 64 bit
Hi Mauro,
Quoted 26 lines · Mauro Carvalho Chehab
Hi Sean,
Sean Young <[email protected]> escreveu:Quoted 3 lines
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now.
Since the beginning, the goal were to support longer scancodes. When we designed the RC subsystem, we were even expecting longer codes[1].
[1] RC6 mode 6A scancode may have, according to the specs, up to 128 bits. At the time we added the RC subsystem, RC6 were brand new, so we opted to be more conservative. That's said, I never found myself any implementation with more than 64 bits for scancodes.
That's why we added the
EVIOCGKEYCODE_V2, with uses:struct
input_keymap_entry{#define INPUT_KEYMAP_BY_INDEX (1 << 0) __u8 flags; __u8 len; __u16 index; __u32 keycode; __u8 scancode[32]; };
Quoted 6 lines
capable of storing scancodes up to 256 bits. The way the code is written at the Kernel, is even possible to extend it further if ever needed.
The reason why we don't properly support 64 bits yet [2] is that it requires some changes in order to provide a backward-compatible set of functions.
I'm not sure what you mean. ir_setkeycode() requires the len to be set accurately; previously it would not work if the len is 8, now it does.
ir_getcodekey() is more problematic, and I may have cheated a bit. The existing user-space applications do not look a the len, so changing the len does not affect them. On little endian, if you write a u64 to memory the lower u32 will be written first, so this works magically. The set of bigendian systems with old userspace using IR and someone reading back scancodes must be a small set (so running ir-keytable -r).
What I should have done is write a u32 if the scancode fits into a u32 and a u64 if not. That way, nothing changes on either endian systems until a 64 bit keymap is loaded, which would need new userspace anyway.
Quoted 4 lines
[2] Actually, I guess we have one driver with has 64 bits scancodes.
A proper patchset should likely modify also the code under
drivers/input, and needs to be submitted against input/evdev tree.
I'm not sure why.
Quoted 7 lines
Quoted 3 lines
The
MSC_SCANevent can only contain 32 bit scancodes, so we no longer generate these input events. The full 64 bit scancode can be read from the lirc chardev.For example, if all possible scancodes are <= 32 bit, it should still generate
MSC_SCAN, as otherwise existing tools that rely on it will break.
v1.16 ir-keytable -t gets the scancodes from the lirc deivce. Just generating MSC_SCAN for 32 bit scancodes is a bit confusing when a 64 bit scancode comes along.
Thanks for the review,
Sean
Quoted 322 lines
Quoted 308 lines
Signed-off-by Sean Young <[email protected]>--- drivers/media/rc/bpf-lirc.c | 5 --- drivers/media/rc/lirc_dev.c | 7 +--- drivers/media/rc/rc-main.c | 77 ++++++++++++++++++++++++------------- include/media/rc-core.h | 8 ++-- include/media/rc-map.h | 4 +- 5 files changed, 58 insertions(+), 43 deletions(-)drivers/media/rc/bpf-lirc.c +0
-5@@ -35,11 +35,6 @@ static const struct bpf_func_proto rc_repeat_proto = { .arg1_type = ARG_PTR_TO_CTX, }; -/* -* Currently rc-core does not support 64-bit scancodes, but there are many -* known protocols with more than 32 bits. So, define the interface as u64 -* as a future-proof. -*/ BPF_CALL_4(bpf_rc_keydown, u32*, sample, u32, protocol, u64, scancode, u32, toggle) {drivers/media/rc/lirc_dev.c +1
-6@@ -269,12 +269,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, goto out_unlock; } -/* -* The scancode field in lirc_scancode is 64-bit simply -* to future-proof it, since there are IR protocols encode -* use more than 32 bits. For now only 32-bit protocols -* are supported. -*/ +/* We only have encoders for 32-bit protocols. */ if (scan.scancode >U32_MAX || !rc_validate_scancode (scan.rc_proto, scan.scancode)) { ret = -EINVAL ;drivers/media/rc/rc-main.c +51
-26@@ -163,6 +163,41 @@ static struct rc_map_list empty_map = { } }; +/** +* scancode_to_u64() - converts scancode in &struct input_keymap_entry +* @ke: keymap entry containing scancode to be converted. +* @scancode: pointer to the location where converted scancode should +* be stored. +* +* This function is a version of input_scancode_to_scalar specialized for +* rc-core. +*/ +static int scancode_to_u64 (const struct input_keymap_entry *ke,u64 *scancode) +{ +switch (ke->len) { +case 1 : + *scancode = *((u8 *)ke->scancode); +break ; + +case 2 : + *scancode = *((u16 *)ke->scancode); +break ; + +case 4 : + *scancode = *((u32 *)ke->scancode); +break ; + +case 8 : + *scancode = *((u64 *)ke->scancode); +break ; + +default : +return -EINVAL ; + } + +return 0 ; +} +/** * ir_create_table() - initializes a scancode table * @dev: the rc_dev device @@ -285,13 +320,13 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,/* Did the user wish to remove the mapping? */ if (new_keycode ==KEY_RESERVED || new_keycode ==KEY_UNKNOWN ) { -dev_dbg (&dev->dev,"#%d: Deleting scan 0x%04x\n" , +dev_dbg (&dev->dev,"#%d: Deleting scan 0x%04llx\n" , index, rc_map->scan[index].scancode); rc_map->len--;memmove (&rc_map->scan[index], &rc_map->scan[index+1 ], (rc_map->len - index) *sizeof (struct rc_map_table )); }else { -dev_dbg (&dev->dev,"#%d: %s scan 0x%04x with key 0x%04x\n" , +dev_dbg (&dev->dev,"#%d: %s scan 0x%04llx with key 0x%04x\n" , index, old_keycode ==KEY_RESERVED ?"New" :"Replacing" , rc_map->scan[index].scancode, new_keycode);@@ -334,8 +369,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,*/ static unsigned int ir_establish_scancode (struct rc_dev *dev,struct rc_map *rc_map, -unsigned int scancode, -bool resize) +u64 scancode,bool resize) {unsigned int i;@@ -394,7 +428,7 @@ static int ir_setkeycode(struct input_dev *idev,struct rc_dev *rdev =input_get_drvdata (idev);struct rc_map *rc_map = &rdev->rc_map;unsigned int index; -unsigned int scancode; +u64 scancode;int retval =0 ;unsigned long flags;@@ -407,7 +441,7 @@ static int ir_setkeycode(struct input_dev *idev, goto out; } }else { - retval =input_scancode_to_scalar (ke, &scancode); + retval =scancode_to_u64 (ke, &scancode);if (retval) goto out;@@ -434,8 +468,7 @@ static int ir_setkeycode(struct input_dev *idev,* * return: -ENOMEM if all keycodes could not be inserted, otherwise zero. */ -static int ir_setkeytable (struct rc_dev *dev, -const struct rc_map *from) +static int ir_setkeytable (struct rc_dev *dev,const struct rc_map *from) {struct rc_map *rc_map = &dev->rc_map;unsigned int i, index;@@ -466,7 +499,7 @@ static int ir_setkeytable(struct rc_dev *dev,static int rc_map_cmp (const void *key,const void *elt) { -const unsigned int *scancode = key; +const u64 *scancode = key;const struct rc_map_table *e = elt;if (*scancode < e->scancode)@@ -487,7 +520,7 @@ static int rc_map_cmp(const void *key, const void *elt)* return: index in the table, -1U if not found */ static unsigned int ir_lookup_by_scancode (const struct rc_map *rc_map, -unsigned int scancode) +u64 scancode) {struct rc_map_table *res;@@ -516,7 +549,7 @@ static int ir_getkeycode(struct input_dev *idev,struct rc_map_table *entry;unsigned long flags;unsigned int index; -unsigned int scancode; +u64 scancode;int retval;spin_lock_irqsave (&rc_map->lock, flags);@@ -524,7 +557,7 @@ static int ir_getkeycode(struct input_dev *idev,if (ke->flags &INPUT_KEYMAP_BY_INDEX ) { index = ke->index; }else { - retval =input_scancode_to_scalar (ke, &scancode); + retval =scancode_to_u64 (ke, &scancode);if (retval) goto out;@@ -538,7 +571,6 @@ static int ir_getkeycode(struct input_dev *idev, ke->keycode = entry->keycode; ke->len =sizeof (entry->scancode);memcpy (ke->scancode, &entry->scancode,sizeof (entry->scancode)); - }else if (!(ke->flags &INPUT_KEYMAP_BY_INDEX )) {/* * We do not really know the valid range of scancodes @@ -570,7 +602,7 @@ static int ir_getkeycode(struct input_dev *idev,* * return: the corresponding keycode, or KEY_RESERVED */ -u32 rc_g_keycode_from_table (struct rc_dev *dev,u32 scancode) +u32 rc_g_keycode_from_table (struct rc_dev *dev,u64 scancode) {struct rc_map *rc_map = &dev->rc_map;unsigned int keycode;@@ -586,7 +618,7 @@ u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)spin_unlock_irqrestore (&rc_map->lock, flags);if (keycode !=KEY_RESERVED ) -dev_dbg (&dev->dev,"%s: scancode 0x%04x keycode 0x%02x\n" , +dev_dbg (&dev->dev,"%s: scancode 0x%04llx keycode 0x%02x\n" , dev->device_name, scancode, keycode);return keycode;@@ -719,9 +751,6 @@ void rc_repeat(struct rc_dev *dev)spin_lock_irqsave (&dev->keylock, flags); -input_event (dev->input_dev,EV_MSC ,MSC_SCAN , dev->last_scancode); -input_sync (dev->input_dev); -if (dev->keypressed) { dev->keyup_jiffies = jiffies + timeout;mod_timer (&dev->timer_keyup, dev->keyup_jiffies);@@ -743,7 +772,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);* called with keylock held. */ static void ir_do_keydown (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u32 keycode,u8 toggle) +u64 scancode,u32 keycode,u8 toggle) { bool new_event = (!dev->keypressed || dev->last_protocol != protocol ||@@ -761,8 +790,6 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,if (new_event && dev->keypressed)ir_do_keyup (dev, false); -input_event (dev->input_dev,EV_MSC ,MSC_SCAN , scancode); - dev->last_protocol = protocol; dev->last_scancode = scancode; dev->last_toggle = toggle;@@ -772,7 +799,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,/* Register a keypress */ dev->keypressed = true; -dev_dbg (&dev->dev,"%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n" , +dev_dbg (&dev->dev,"%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08llx\n" , dev->device_name, keycode, protocol, scancode);input_report_key (dev->input_dev, keycode,1 );@@ -809,7 +836,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,* This routine is used to signal that a key has been pressed on the * remote control. */ -void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u32 scancode, +void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u64 scancode,u8 toggle) {unsigned long flags;@@ -840,7 +867,7 @@ EXPORT_SYMBOL_GPL(rc_keydown);* remote control. The driver must manually call rc_keyup() at a later stage. */ void rc_keydown_notimeout (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u8 toggle) +u64 scancode,u8 toggle) {unsigned long flags;u32 keycode =rc_g_keycode_from_table (dev, scancode);@@ -1769,8 +1796,6 @@ static int rc_prepare_rx_device(struct rc_dev *dev)/* Keyboard events */ set_bit (EV_KEY , dev->input_dev->evbit);set_bit (EV_REP , dev->input_dev->evbit); -set_bit (EV_MSC , dev->input_dev->evbit); -set_bit (MSC_SCAN , dev->input_dev->mscbit);/* Pointer/mouse events */ set_bit (INPUT_PROP_POINTING_STICK , dev->input_dev->propbit);include/media/rc-core.h +4
-4@@ -192,7 +192,7 @@ struct rc_dev {struct timer_list timer_repeat;u32 last_keycode;enum rc_proto last_protocol; -u32 last_scancode; +u64 last_scancode;u8 last_toggle;u32 timeout;u32 min_timeout;@@ -284,12 +284,12 @@ int devm_rc_register_device(struct device *parent, struct rc_dev *dev);void rc_unregister_device (struct rc_dev *dev);void rc_repeat (struct rc_dev *dev); -void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u32 scancode, +void rc_keydown (struct rc_dev *dev,enum rc_proto protocol,u64 scancode,u8 toggle);void rc_keydown_notimeout (struct rc_dev *dev,enum rc_proto protocol, -u32 scancode,u8 toggle); +u64 scancode,u8 toggle);void rc_keyup (struct rc_dev *dev); -u32 rc_g_keycode_from_table (struct rc_dev *dev,u32 scancode); +u32 rc_g_keycode_from_table (struct rc_dev *dev,u64 scancode);/* * From rc-raw.c include/media/rc-map.h +0
-0@@ -85,11 +85,11 @@/** * struct rc_map_table - represents a scancode/keycode pair * include/media/rc-map.h line 95
Quoted 10 lines
include/media/rc-map.h +2
-2-* @scancode: scan code (u32) +* @scancode: scan code (u64) * @keycode: Linux input keycode */ struct rc_map_table { -u32 scancode; +u64 scancode;u32 keycode; };Thanks,
Mauro
Sean Young
maintainerRe: [PATCH v2] media: rc: make scancodes 64 bit
In reply to Mauro Carvalho ChehabHi Mauro,
Quoted 9 lines · Mauro Carvalho Chehab
Em Wed, 29 Jan 2020 11:54:16 +0000
Sean Young <[email protected]> escreveu:Quoted 3 lines
There are many protocols that encode more than 32 bit. We want 64 bit support so that BPF IR decoders can decode more than 32 bit. None of the existing kernel IR decoders/encoders support 64 bit, for now.
The reason why we don't properly support 64 bits yet [2] is that it requires some changes in order to provide a backward-compatible set of functions.
This should be supported.
Quoted 1 line
[2] Actually, I guess we have one driver with has 64 bits scancodes.
Which one is that?
Quoted 7 lines
Quoted 3 lines
The
MSC_SCANevent can only contain 32 bit scancodes, so we no longer generate these input events. The full 64 bit scancode can be read from the lirc chardev.For example, if all possible scancodes are <= 32 bit, it should still generate
MSC_SCAN, as otherwise existing tools that rely on it will break.
The scancodes are generated from the driver, and even if there is no keymap loaded, scancodes are still generated. Therefore I don't think it makes sense to switch on whether there are any 64 bit scancodes in the current keymap.
We don't know if a driver will produce 64 bit scancodes right now. Although BPF is the only route (currently) which can produce 64 bit scancodes, there is no way to see if a BPF program will generate 64 bit scancodes in advance.
So, I've changed the code to generate MSC_SCANCODE if the scancode fits into 32 bits, reluctantly. However, I think this is the best we can do for compatibility. I will post a v2 shortly.
Thanks
Sean
Sean Young
maintainerPATCH 2/4 keytable: new samsung36 bpf decoder
In reply to Sean Young--- utils/keytable/bpf_protocols/Makefile.am | 2 +- utils/keytable/bpf_protocols/samsung36.c | 136 +++++++++++++++++++++++ 2 files changed, 137 insertions(+), 1 deletion(-) create mode 100644 utils/keytable/bpf_protocols/samsung36.c
utils/keytable/bpf_protocols/Makefile.am +1 -1
@@ -10,7 +10,7 @@ CLANG_SYS_INCLUDES := $(shell $(CLANG) -v -E - </dev/null 2>&1 \ %.o: %.c bpf_helpers.h $(CLANG) $(CLANG_SYS_INCLUDES) -D__linux__ -I$(top_srcdir)/include -target bpf -O2 -c $< -PROTOCOLS = grundig.o pulse_distance.o pulse_length.o rc_mm.o manchester.o xbox-dvd.o imon_rsc.o raw.o +PROTOCOLS = grundig.o pulse_distance.o pulse_length.o rc_mm.o manchester.o xbox-dvd.o imon_rsc.o raw.o samsung36.o all: $(PROTOCOLS)
utils/keytable/bpf_protocols/samsung36.c new file +136 -0
136 lines not on this page · raw message
Signature · 1 line
2.24.1
Sean Young
maintainerPATCH 3/4 Add keymap for Samsung AK59-00125A remote
In reply to Sean Young--- .../samsung_ak59_00125a.toml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 utils/keytable/rc_keymaps_userspace/samsung_ak59_00125a.toml
utils/keytable/rc_keymaps_userspace/samsung_ak59_00125a.toml new file +69 -0
@@ -0,0 +1,69 @@ +[[protocols]] +name = 'Samsung AK59-00125A' +protocol = 'pulse_distance' +header_pulse = 4500 +header_space = 4500 +bit_pulse = 600 +bit_0_space = 500 +bit_1_space = 1600 +bits = 32 +margin = 300 +trailer_pulse = 600 +[protocols.scancodes] +0xe0e040bf = "KEY_POWER2" +# input +0xe0e0807f = "KEY_VIDEO" +0xe0e0e01f = "KEY_VOLUMEUP" +0xe0e0d02f = "KEY_VOLUMEDOWN" +0xe0e0f00f = "KEY_MUTE" +0xe0e048b7 = "KEY_CHANNELUP" +0xe0e008f7 = "KEY_CHANNELDOWN" +[[protocols]] +protocol = 'samsung36' +[protocols.scancodes] +0x400e00ff = "KEY_POWER" +# bonus view +0x400ecc33 = "KEY_VENDOR" +0x400e807f = "KEY_EJECTCD" +0x400e40bf = "KEY_NUMERIC_1" +0x400ec03f = "KEY_NUMERIC_2" +0x400e20df = "KEY_NUMERIC_3" +0x400ea05f = "KEY_NUMERIC_4" +0x400e609f = "KEY_NUMERIC_5" +0x400ee01f = "KEY_NUMERIC_6" +0x400e10ef = "KEY_NUMERIC_7" +0x400e906f = "KEY_NUMERIC_8" +0x400e50af = "KEY_NUMERIC_9" +0x400ed02f = "KEY_NUMERIC_0" +0x400ea45b = "KEY_AUDIO" +0x400e649b = "KEY_SUBTITLE" +0x400eb04f = "KEY_PREVIOUS" +0x400e8877 = "KEY_NEXT" +0x400e48b7 = "KEY_FASTREVERSE" +0x400ea857 = "KEY_FASTFORWARD" +0x400ec837 = "KEY_STOP" +0x400e28d7 = "KEY_PLAY" +0x400e4cb3 = "KEY_PAUSE" +# disc menu +0x400eb847 = "KEY_ROOT_MENU" +0x400e6897 = "KEY_MENU" +# title menu/popup +0x400e04fb = "KEY_TITLE" +# tools +0x400e5ca3 = "KEY_CONFIG" +0x400e7887 = "KEY_INFO" +0x400e18e7 = "KEY_UP" +0x400ed827 = "KEY_LEFT" +0x400e58a7 = "KEY_RIGHT" +0x400e9867 = "KEY_DOWN" +0x400e38c7 = "KEY_ENTER" +0x400ee817 = "KEY_ESC" +0x400ed42b = "KEY_EXIT" +0x400e847b = "KEY_RED" +0x400e44bb = "KEY_GREEN" +0x400ec43b = "KEY_YELLOW" +0x400e24db = "KEY_BLUE" +# smart/hub +0x400e1ce3 = "KEY_VENDOR" +0x400ebc43 = "KEY_SEARCH" +0x400ee41b = "KEY_MEDIA_REPEAT"
Signature · 1 line
2.24.1
Sean Young
maintainerPATCH 4/4 keytable: a bpf protocol can have parameters and no scancodes
In reply to Sean YoungCurrently a protocol without scancodes does not get its parameters parsed.
--- utils/common/keymap.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
utils/common/keymap.c +7 -7
@@ -384,13 +384,6 @@ static error_t parse_toml_protocol(const char *fname, struct toml_table_t *prootreturn EINVAL ; } - scancodes =toml_table_in (proot,"scancodes" ); -if (!scancodes) { -if (verbose) -fprintf (stderr,_ ("%s: no [protocols.scancodes] section\n" ), fname); -return 0 ; - } -for (i =0 ; (key =toml_key_in (proot, i)) !=NULL ; i++) {int64_t value;
@@ -408,6 +401,13 @@ static error_t parse_toml_protocol(const char *fname, struct toml_table_t *proot } } + scancodes =toml_table_in (proot,"scancodes" ); +if (!scancodes) { +if (verbose) +fprintf (stderr,_ ("%s: no [protocols.scancodes] section\n" ), fname); +return 0 ; + } +struct scancode_entry **next = &map->scancode; i =0 ;
Signature · 1 line
2.24.1