kbuild: fix the document to use extra-y for vmlinux.lds
Subsystems (27)
PATCH 1/2 kbuild: fix the document to use extra-y for vmlinux.lds
The difference between "always" and "extra-y" is that the targets listed in $(always) are always built, whereas the ones in $(extra-y) are built only when KBUILD_BUILTIN is set.
So, "make modules" does not build the targets in $(extra-y).
vmlinux.lds is only needed for linking vmlinux. So, adding it to extra-y is more correct. In fact, arch/x86/kernel/Makefile does this.
Fix the example code.
---
Documentation/kbuild/makefiles.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/kbuild/makefiles.rst +2 -2
@@ -1269,12 +1269,12 @@ When kbuild executes, the following steps are followed (roughly): Example:: #arch/x86/kernel/Makefile - always := vmlinux.lds + extra-y := vmlinux.lds #Makefile export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) - The assignment to $(always) is used to tell kbuild to build the + The assignment to extra-y is used to tell kbuild to build the target vmlinux.lds. The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the specified options when building the target vmlinux.lds.
Signature · 1 line
2.17.1
PATCH 2/2 kbuild: rename hostprogs-y/always to hostprogs/always-y
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while.
---
Documentation/kbuild/makefiles.rst | 49 ++++-------- Kbuild | 8 +- arch/alpha/boot/Makefile | 2 +- arch/arm/vdso/Makefile | 2 +- arch/arm64/kernel/vdso32/Makefile | 4 +- arch/mips/boot/Makefile | 2 +- arch/mips/boot/compressed/Makefile | 4 +- arch/mips/boot/tools/Makefile | 2 +- arch/mips/tools/Makefile | 4 +- arch/mips/vdso/Makefile | 2 +- arch/powerpc/boot/Makefile | 4 +- arch/s390/tools/Makefile | 4 +- arch/sparc/boot/Makefile | 2 +- arch/sparc/vdso/Makefile | 2 +- arch/x86/boot/Makefile | 4 +- arch/x86/boot/compressed/Makefile | 2 +- arch/x86/entry/vdso/Makefile | 2 +- arch/x86/realmode/rm/Makefile | 2 +- arch/x86/tools/Makefile | 4 +- drivers/gpu/drm/radeon/Makefile | 2 +- drivers/tty/vt/Makefile | 2 +- drivers/video/logo/Makefile | 2 +- drivers/zorro/Makefile | 2 +- fs/unicode/Makefile | 2 +- lib/Makefile | 4 +- lib/raid6/Makefile | 2 +- net/bpfilter/Makefile | 2 +- samples/bpf/Makefile | 118 ++++++++++++++-------------- samples/connector/Makefile | 8 +- samples/hidraw/Makefile | 6 +- samples/mei/Makefile | 4 +- samples/pidfd/Makefile | 4 +- samples/seccomp/Makefile | 4 +- samples/uhid/Makefile | 4 +- samples/vfs/Makefile | 5 +- scripts/Makefile | 22 +++--- scripts/Makefile.build | 8 +- scripts/Makefile.clean | 4 +- scripts/Makefile.host | 8 +- scripts/Makefile.lib | 6 +- scripts/basic/Makefile | 4 +- scripts/dtc/Makefile | 4 +- scripts/gcc-plugins/Makefile | 2 +- scripts/genksyms/Makefile | 4 +- scripts/kconfig/Makefile | 10 +-- scripts/mod/Makefile | 4 +- scripts/selinux/genheaders/Makefile | 4 +- scripts/selinux/mdp/Makefile | 4 +- usr/Makefile | 2 +- 49 files changed, 172 insertions(+), 190 deletions(-)
Documentation/kbuild/makefiles.rst +16 -33
@@ -28,7 +28,6 @@ This document describes the Linux kernel Makefiles. --- 4.3 Using C++ for host programs --- 4.4 Controlling compiler options for host programs --- 4.5 When host programs are actually built - --- 4.6 Using hostprogs-$(CONFIG_FOO) === 5 Kbuild clean infrastructure
@@ -595,11 +594,11 @@ compilation stage. Two steps are required in order to use a host executable. The first step is to tell kbuild that a host program exists. This is -done utilising the variable hostprogs-y. +done utilising the variable "hostprogs". The second step is to add an explicit dependency to the executable. This can be done in two ways. Either add the dependency in a rule, -or utilise the variable $(always). +or utilise the variable "always-y". Both possibilities are described in the following. 4.1 Simple Host Program
@@ -612,7 +611,7 @@ Both possibilities are described in the following. Example:: - hostprogs-y := bin2hex + hostprogs := bin2hex Kbuild assumes in the above example that bin2hex is made from a single c-source file named bin2hex.c located in the same directory as
@@ -630,7 +629,7 @@ Both possibilities are described in the following. Example:: #scripts/lxdialog/Makefile - hostprogs-y := lxdialog + hostprogs := lxdialog lxdialog-objs := checklist.o lxdialog.o Objects with extension .o are compiled from the corresponding .c
@@ -650,7 +649,7 @@ Both possibilities are described in the following. Example:: #scripts/kconfig/Makefile - hostprogs-y := qconf + hostprogs := qconf qconf-cxxobjs := qconf.o In the example above the executable is composed of the C++ file
@@ -662,7 +661,7 @@ Both possibilities are described in the following. Example:: #scripts/kconfig/Makefile - hostprogs-y := qconf + hostprogs := qconf qconf-cxxobjs := qconf.o qconf-objs := check.o
@@ -710,7 +709,7 @@ Both possibilities are described in the following. Example:: #drivers/pci/Makefile - hostprogs-y := gen-devlist + hostprogs := gen-devlist $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist ( cd $(obj); ./gen-devlist ) < $<
@@ -718,47 +717,31 @@ Both possibilities are described in the following. $(obj)/gen-devlist is updated. Note that references to the host programs in special rules must be prefixed with $(obj). - (2) Use $(always) + (2) Use always-y When there is no suitable special rule, and the host program - shall be built when a makefile is entered, the $(always) + shall be built when a makefile is entered, the always-y variable shall be used. Example:: #scripts/lxdialog/Makefile - hostprogs-y := lxdialog - always := $(hostprogs-y) + hostprogs := lxdialog + always-y := $(hostprogs) This will tell kbuild to build lxdialog even if not referenced in any rule. -4.6 Using hostprogs-$(CONFIG_FOO) ---------------------------------- - - A typical pattern in a Kbuild file looks like this: - - Example:: - - #scripts/Makefile - hostprogs-$(CONFIG_KALLSYMS) += kallsyms - - Kbuild knows about both 'y' for built-in and 'm' for module. - So if a config symbol evaluates to 'm', kbuild will still build - the binary. In other words, Kbuild handles hostprogs-m exactly - like hostprogs-y. But only hostprogs-y is recommended to be used - when no CONFIG symbols are involved. - 5 Kbuild clean infrastructure ============================= "make clean" deletes most generated files in the obj tree where the kernel is compiled. This includes generated files such as host programs. -Kbuild knows targets listed in $(hostprogs-y), $(hostprogs-m), $(always), -$(extra-y) and $(targets). They are all deleted during "make clean". -Files matching the patterns "*.[oas]", "*.ko", plus some additional files -generated by kbuild are deleted all over the kernel src tree when -"make clean" is executed. +Kbuild knows targets listed in $(hostprogs), $(always-y), $(always-m), +$(always-), $(extra-y), $(extra-) and $(targets). They are all deleted +during "make clean". Files matching the patterns "*.[oas]", "*.ko", plus +some additional files generated by kbuild are deleted all over the kernel +source tree when "make clean" is executed. Additional files or directories can be specified in kbuild makefiles by use of $(clean-files).
Kbuild +4 -4
@@ -7,7 +7,7 @@ bounds-file := include/generated/bounds.h -always := $(bounds-file) +always-y := $(bounds-file) targets := kernel/bounds.s $(bounds-file): kernel/bounds.s FORCE
@@ -28,7 +28,7 @@ $(timeconst-file): kernel/time/timeconst.bc FORCE offsets-file := include/generated/asm-offsets.h -always += $(offsets-file) +always-y += $(offsets-file) targets += arch/$(SRCARCH)/kernel/asm-offsets.s arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file)
@@ -39,7 +39,7 @@ $(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE ##### # Check for missing system calls -always += missing-syscalls +always-y += missing-syscalls quiet_cmd_syscalls = CALL $< cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
@@ -50,7 +50,7 @@ missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE ##### # Check atomic headers are up-to-date -always += old-atomics +always-y += old-atomics quiet_cmd_atomics = CALL $< cmd_atomics = $(CONFIG_SHELL) $<
arch/alpha/boot/Makefile +1 -1
@@ -8,7 +8,7 @@ # Copyright (C) 1994 by Linus Torvalds # -hostprogs-y := tools/mkbb tools/objstrip +hostprogs := tools/mkbb tools/objstrip targets := vmlinux.gz vmlinux \ vmlinux.nh tools/lxboot tools/bootlx tools/bootph \ tools/bootpzh bootloader bootpheader bootpzheader
arch/arm/vdso/Makefile +1 -1
@@ -5,7 +5,7 @@ ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 include $(srctree)/lib/vdso/Makefile -hostprogs-y := vdsomunge +hostprogs := vdsomunge obj-vdso := vgettimeofday.o datapage.o note.o
arch/arm64/kernel/vdso32/Makefile +2 -2
@@ -115,9 +115,9 @@ VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd) # Borrow vdsomunge.c from the arm vDSO # We have to use a relative path because scripts/Makefile.host prefixes -# $(hostprogs-y) with $(obj) +# $(hostprogs) with $(obj) munge := ../../../arm/vdso/vdsomunge -hostprogs-y := $(munge) +hostprogs := $(munge) c-obj-vdso := note.o c-obj-vdso-gettimeofday := vgettimeofday.o
arch/mips/boot/Makefile +1 -1
@@ -21,7 +21,7 @@ endif drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options strip-flags := $(addprefix --remove-section=,$(drop-sections)) -hostprogs-y := elf2ecoff +hostprogs := elf2ecoff suffix-y := bin suffix-$(CONFIG_KERNEL_BZIP2) := bz2
arch/mips/boot/compressed/Makefile +2 -2
@@ -84,7 +84,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE) # Calculate the load address of the compressed kernel image -hostprogs-y := calc_vmlinuz_load_addr +hostprogs := calc_vmlinuz_load_addr ifneq ($(zload-y),) VMLINUZ_LOAD_ADDRESS := $(zload-y)
@@ -112,7 +112,7 @@ ifdef CONFIG_MACH_DECSTATION endif # elf2ecoff can only handle 32bit image -hostprogs-y += ../elf2ecoff +hostprogs += ../elf2ecoff ifdef CONFIG_32BIT VMLINUZ = vmlinuz
arch/mips/boot/tools/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y += relocs +hostprogs += relocs relocs-objs += relocs_32.o relocs-objs += relocs_64.o relocs-objs += relocs_main.o
arch/mips/tools/Makefile +2 -2
@@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y := elf-entry +hostprogs := elf-entry PHONY += elf-entry elf-entry: $(obj)/elf-entry @: -hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check +hostprogs += loongson3-llsc-check PHONY += loongson3-llsc-check loongson3-llsc-check: $(obj)/loongson3-llsc-check @:
arch/mips/vdso/Makefile +1 -1
@@ -100,7 +100,7 @@ $(obj)/%.so.raw: OBJCOPYFLAGS := -S $(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE $(call if_changed,objcopy) -hostprogs-y := genvdso +hostprogs := genvdso quiet_cmd_genvdso = GENVDSO $@ define cmd_genvdso
arch/powerpc/boot/Makefile +2 -2
@@ -224,7 +224,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE $(call if_changed,bootar) -hostprogs-y := addnote hack-coff mktree +hostprogs := addnote hack-coff mktree targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -464,7 +464,7 @@ WRAPPER_BINDIR := /usr/sbin INSTALL := install extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) -hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) +hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
arch/s390/tools/Makefile +2 -2
@@ -10,8 +10,8 @@ PHONY += kapi kapi: $(kapi-hdrs-y) -hostprogs-y += gen_facilities -hostprogs-y += gen_opcode_table +hostprogs += gen_facilities +hostprogs += gen_opcode_table HOSTCFLAGS_gen_facilities.o += $(LINUXINCLUDE)
arch/sparc/boot/Makefile +1 -1
@@ -7,7 +7,7 @@ ROOT_IMG := /usr/src/root.img ELFTOAOUT := elftoaout -hostprogs-y := piggyback +hostprogs := piggyback targets := tftpboot.img image zImage vmlinux.aout clean-files := System.map
arch/sparc/vdso/Makefile +1 -1
@@ -41,7 +41,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE $(call if_changed,vdso) HOST_EXTRACFLAGS += -I$(srctree)/tools/include -hostprogs-y += vdso2c +hostprogs += vdso2c quiet_cmd_vdso2c = VDSO2C $@ cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
arch/x86/boot/Makefile +2 -2
@@ -45,8 +45,8 @@ setup-y += video-vesa.o setup-y += video-bios.o targets += $(setup-y) -hostprogs-y := tools/build -hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr +hostprogs := tools/build +hostprogs += mkcpustr HOST_EXTRACFLAGS += -I$(srctree)/tools/include \ -include include/generated/autoconf.h \
arch/x86/boot/compressed/Makefile +1 -1
@@ -58,7 +58,7 @@ KBUILD_LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \ endif LDFLAGS_vmlinux := -T -hostprogs-y := mkpiggy +hostprogs := mkpiggy HOST_EXTRACFLAGS += -I$(srctree)/tools/include sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'
arch/x86/entry/vdso/Makefile +1 -1
@@ -59,7 +59,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE $(call if_changed,vdso_and_check) HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/$(SUBARCH)/include/uapi -hostprogs-y += vdso2c +hostprogs += vdso2c quiet_cmd_vdso2c = VDSO2C $@ cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
arch/x86/realmode/rm/Makefile +1 -1
@@ -12,7 +12,7 @@ OBJECT_FILES_NON_STANDARD := y # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. KCOV_INSTRUMENT := n -always := realmode.bin realmode.relocs +always-y := realmode.bin realmode.relocs wakeup-objs := wakeup_asm.o wakemain.o video-mode.o wakeup-objs += copy.o bioscall.o regs.o
arch/x86/tools/Makefile +2 -2
@@ -26,7 +26,7 @@ posttest: $(obj)/insn_decoder_test vmlinux $(obj)/insn_sanity $(call cmd,posttest) $(call cmd,sanitytest) -hostprogs-y += insn_decoder_test insn_sanity +hostprogs += insn_decoder_test insn_sanity # -I needed for generated C source and C source which in the kernel tree. HOSTCFLAGS_insn_decoder_test.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/
@@ -39,7 +39,7 @@ $(obj)/insn_decoder_test.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/l $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c HOST_EXTRACFLAGS += -I$(srctree)/tools/include -hostprogs-y += relocs +hostprogs += relocs relocs-objs := relocs_32.o relocs_64.o relocs_common.o PHONY += relocs relocs: $(obj)/relocs
drivers/gpu/drm/radeon/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -hostprogs-y := mkregtable +hostprogs := mkregtable targets := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h quiet_cmd_mkregtable = MKREG $@
drivers/tty/vt/Makefile +1 -1
@@ -12,7 +12,7 @@ obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o # Files generated that shall be removed upon make clean clean-files := consolemap_deftbl.c defkeymap.c -hostprogs-y += conmakehash +hostprogs += conmakehash quiet_cmd_conmk = CONMK $@ cmd_conmk = $(obj)/conmakehash $< > $@
drivers/video/logo/Makefile +1 -1
@@ -18,7 +18,7 @@ obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o # How to generate logo's -hostprogs-y := pnmtologo +hostprogs := pnmtologo # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..." quiet_cmd_logo = LOGO $@
drivers/zorro/Makefile +1 -1
@@ -7,7 +7,7 @@ obj-$(CONFIG_ZORRO) += zorro.o zorro-driver.o zorro-sysfs.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_ZORRO_NAMES) += names.o -hostprogs-y := gen-devlist +hostprogs := gen-devlist # Files generated that shall be removed upon make clean clean-files := devlist.h
fs/unicode/Makefile +1 -1
@@ -35,4 +35,4 @@ $(obj)/utf8data.h: $(src)/utf8data.h_shipped FORCE endif targets += utf8data.h -hostprogs-y += mkutf8data +hostprogs += mkutf8data
lib/Makefile +2 -2
@@ -239,8 +239,8 @@ obj-$(CONFIG_ASN1) += asn1_decoder.o obj-$(CONFIG_FONT_SUPPORT) += fonts/ -hostprogs-y := gen_crc32table -hostprogs-y += gen_crc64table +hostprogs := gen_crc32table +hostprogs += gen_crc64table clean-files := crc32table.h clean-files += crc64table.h
lib/raid6/Makefile +1 -1
@@ -10,7 +10,7 @@ raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \ raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o -hostprogs-y += mktables +hostprogs += mktables ifeq ($(CONFIG_ALTIVEC),y) altivec_flags := -maltivec $(call cc-option,-mabi=altivec)
net/bpfilter/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for the Linux BPFILTER layer. # -hostprogs-y := bpfilter_umh +hostprogs := bpfilter_umh bpfilter_umh-objs := main.o KBUILD_HOSTCFLAGS += -I $(srctree)/tools/include/ -I $(srctree)/tools/include/uapi HOSTCC := $(CC)
samples/bpf/Makefile +59 -59
124 lines not on this page · raw message
samples/connector/Makefile +2 -6
@@ -2,12 +2,8 @@ obj-$(CONFIG_SAMPLE_CONNECTOR) += cn_test.o # List of programs to build -ifdef CONFIG_SAMPLE_CONNECTOR -hostprogs-y := ucon -endif - -# Tell kbuild to always build the programs -always := $(hostprogs-y) +hostprogs := ucon +always-y := $(hostprogs) HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
samples/hidraw/Makefile +2 -4
@@ -1,9 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # List of programs to build -hostprogs-y := hid-example - -# Tell kbuild to always build the programs -always := $(hostprogs-y) +hostprogs := hid-example +always-y := $(hostprogs) HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include
samples/mei/Makefile +2 -2
@@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 # Copyright (c) 2012-2019, Intel Corporation. All rights reserved. -hostprogs-y := mei-amt-version +hostprogs := mei-amt-version HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include -always := $(hostprogs-y) +always-y := $(hostprogs) all: mei-amt-version
samples/pidfd/Makefile +2 -2
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y := pidfd-metadata -always := $(hostprogs-y) +hostprogs := pidfd-metadata +always-y := $(hostprogs) HOSTCFLAGS_pidfd-metadata.o += -I$(objtree)/usr/include all: pidfd-metadata
samples/seccomp/Makefile +2 -2
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 ifndef CROSS_COMPILE -hostprogs-y := bpf-fancy dropper bpf-direct user-trap +hostprogs := bpf-fancy dropper bpf-direct user-trap HOSTCFLAGS_bpf-fancy.o += -I$(objtree)/usr/include HOSTCFLAGS_bpf-fancy.o += -idirafter $(objtree)/include
@@ -40,5 +40,5 @@ HOSTLDLIBS_bpf-fancy += $(MFLAG) HOSTLDLIBS_dropper += $(MFLAG) HOSTLDLIBS_user-trap += $(MFLAG) endif -always := $(hostprogs-y) +always-y := $(hostprogs) endif
samples/uhid/Makefile +2 -2
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only # List of programs to build -hostprogs-y := uhid-example +hostprogs := uhid-example # Tell kbuild to always build the programs -always := $(hostprogs-y) +always-y := $(hostprogs) HOSTCFLAGS_uhid-example.o += -I$(objtree)/usr/include
samples/vfs/Makefile +2 -3
@@ -1,11 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only # List of programs to build -hostprogs-y := \ +hostprogs := \ test-fsmount \ test-statx -# Tell kbuild to always build the programs -always := $(hostprogs-y) +always-y := $(hostprogs) HOSTCFLAGS_test-fsmount.o += -I$(objtree)/usr/include HOSTCFLAGS_test-statx.o += -I$(objtree)/usr/include
scripts/Makefile +11 -11
@@ -7,14 +7,14 @@ HOST_EXTRACFLAGS += -I$(srctree)/tools/include -hostprogs-$(CONFIG_BUILD_BIN2C) += bin2c -hostprogs-$(CONFIG_KALLSYMS) += kallsyms -hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount -hostprogs-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable -hostprogs-$(CONFIG_ASN1) += asn1_compiler -hostprogs-$(CONFIG_MODULE_SIG_FORMAT) += sign-file -hostprogs-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert -hostprogs-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert +always-$(CONFIG_BUILD_BIN2C) += bin2c +always-$(CONFIG_KALLSYMS) += kallsyms +always-$(BUILD_C_RECORDMCOUNT) += recordmcount +always-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable +always-$(CONFIG_ASN1) += asn1_compiler +always-$(CONFIG_MODULE_SIG_FORMAT) += sign-file +always-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert +always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
@@ -30,10 +30,10 @@ HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED HOSTLDLIBS_sorttable = -lpthread endif -always := $(hostprogs-y) $(hostprogs-m) +hostprogs := $(always-y) $(always-m) -# The following hostprogs-y programs are only build on demand -hostprogs-y += unifdef +# The following programs are only built on demand +hostprogs += unifdef subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins subdir-$(CONFIG_MODVERSIONS) += genksyms
scripts/Makefile.build +5 -3
@@ -16,6 +16,8 @@ obj-m := lib-y := lib-m := always := +always-y := +always-m := targets := subdir-y := subdir-m :=
@@ -44,7 +46,7 @@ include $(kbuild-file) include scripts/Makefile.lib # Do not include host rules unless needed -ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),) +ifneq ($(hostprogs)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),) include scripts/Makefile.host endif
@@ -348,7 +350,7 @@ $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE $(call if_changed_rule,as_o_S) targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y) -targets += $(extra-y) $(MAKECMDGOALS) $(always) +targets += $(extra-y) $(always-y) $(MAKECMDGOALS) # Linker scripts preprocessor (.lds.S -> .lds) # ---------------------------------------------------------------------------
@@ -490,7 +492,7 @@ else __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \ - $(subdir-ym) $(always) + $(subdir-ym) $(always-y) @: endif
scripts/Makefile.clean +2 -2
@@ -28,8 +28,8 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn)) # directory __clean-files := $(extra-y) $(extra-m) $(extra-) \ - $(always) $(targets) $(clean-files) \ - $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \ + $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files) \ + $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \ $(hostlibs-y) $(hostlibs-m) $(hostlibs-) \ $(hostcxxlibs-y) $(hostcxxlibs-m)
scripts/Makefile.host +4 -4
@@ -24,21 +24,21 @@ $(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE # Both C and C++ are supported, but preferred language is C for such utilities. # # Sample syntax (see Documentation/kbuild/makefiles.rst for reference) -# hostprogs-y := bin2hex +# hostprogs := bin2hex # Will compile bin2hex.c and create an executable named bin2hex # -# hostprogs-y := lxdialog +# hostprogs := lxdialog # lxdialog-objs := checklist.o lxdialog.o # Will compile lxdialog.c and checklist.c, and then link the executable # lxdialog, based on checklist.o and lxdialog.o # -# hostprogs-y := qconf +# hostprogs := qconf # qconf-cxxobjs := qconf.o # qconf-objs := menu.o # Will compile qconf as a C++ program, and menu as a C program. # They are linked as C++ code to the executable qconf -__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m)) +__hostprogs := $(sort $(hostprogs)) host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m)) host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
scripts/Makefile.lib +5 -1
@@ -4,6 +4,8 @@ asflags-y += $(EXTRA_AFLAGS) ccflags-y += $(EXTRA_CFLAGS) cppflags-y += $(EXTRA_CPPFLAGS) ldflags-y += $(EXTRA_LDFLAGS) +always-y += $(always) +hostprogs += $(hostprogs-y) $(hostprogs-m) # flags that take effect in current and sub directories KBUILD_AFLAGS += $(subdir-asflags-y)
@@ -59,6 +61,8 @@ subdir-obj-y := $(filter %/built-in.a, $(obj-y)) real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m))) +always-y += $(always-m) + # DTB # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built extra-y += $(dtb-y)
@@ -72,7 +76,7 @@ endif # Add subdir path extra-y := $(addprefix $(obj)/,$(extra-y)) -always := $(addprefix $(obj)/,$(always)) +always-y := $(addprefix $(obj)/,$(always-y)) targets := $(addprefix $(obj)/,$(targets)) modorder := $(addprefix $(obj)/,$(modorder)) obj-m := $(addprefix $(obj)/,$(obj-m))
scripts/basic/Makefile +2 -2
@@ -2,5 +2,5 @@ # # fixdep: used to generate dependency information during build process -hostprogs-y := fixdep -always := $(hostprogs-y) +hostprogs := fixdep +always-y := $(hostprogs)
scripts/dtc/Makefile +2 -2
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 # scripts/dtc makefile -hostprogs-$(CONFIG_DTC) := dtc -always := $(hostprogs-y) +hostprogs := dtc +always-$(CONFIG_DTC) := $(hostprogs) dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ srcpos.o checks.o util.o
scripts/gcc-plugins/Makefile +1 -1
@@ -23,7 +23,7 @@ $(objtree)/$(obj)/randomize_layout_seed.h: FORCE targets = randomize_layout_seed.h randomize_layout_hash.h $(HOSTLIBS)-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p))) -always := $($(HOSTLIBS)-y) +always-y := $($(HOSTLIBS)-y) $(foreach p,$($(HOSTLIBS)-y:%.so=%),$(eval $(p)-objs := $(p).o))
scripts/genksyms/Makefile +2 -2
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y := genksyms -always := $(hostprogs-y) +hostprogs := genksyms +always-y := $(hostprogs) genksyms-objs := genksyms.o parse.tab.o lex.lex.o
scripts/kconfig/Makefile +5 -5
@@ -157,11 +157,11 @@ HOSTCFLAGS_lexer.lex.o := -I $(srctree)/$(src) HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src) # conf: Used for defconfig, oldconfig and related targets -hostprogs-y += conf +hostprogs += conf conf-objs := conf.o $(common-objs) # nconf: Used for the nconfig target based on ncurses -hostprogs-y += nconf +hostprogs += nconf nconf-objs := nconf.o nconf.gui.o $(common-objs) HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs)
@@ -171,7 +171,7 @@ HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags) $(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg # mconf: Used for the menuconfig target based on lxdialog -hostprogs-y += mconf +hostprogs += mconf lxdialog := $(addprefix lxdialog/, \ checklist.o inputbox.o menubox.o textbox.o util.o yesno.o) mconf-objs := mconf.o $(lxdialog) $(common-objs)
@@ -183,7 +183,7 @@ $(foreach f, mconf.o $(lxdialog), \ $(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg # qconf: Used for the xconfig target based on Qt -hostprogs-y += qconf +hostprogs += qconf qconf-cxxobjs := qconf.o qconf-objs := images.o $(common-objs)
@@ -199,7 +199,7 @@ $(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg $(call cmd,moc) # gconf: Used for the gconfig target based on GTK+ -hostprogs-y += gconf +hostprogs += gconf gconf-objs := gconf.o images.o $(common-objs) HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs)
scripts/mod/Makefile +2 -2
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 OBJECT_FILES_NON_STANDARD := y -hostprogs-y := modpost mk_elfconfig -always := $(hostprogs-y) empty.o +hostprogs := modpost mk_elfconfig +always-y := $(hostprogs) empty.o modpost-objs := modpost.o file2alias.o sumversion.o
scripts/selinux/genheaders/Makefile +2 -2
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y := genheaders +hostprogs := genheaders HOST_EXTRACFLAGS += \ -I$(srctree)/include/uapi -I$(srctree)/include \ -I$(srctree)/security/selinux/include -always := $(hostprogs-y) +always-y := $(hostprogs)
scripts/selinux/mdp/Makefile +2 -2
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -hostprogs-y := mdp +hostprogs := mdp HOST_EXTRACFLAGS += \ -I$(srctree)/include/uapi -I$(srctree)/include \ -I$(srctree)/security/selinux/include -I$(objtree)/include -always := $(hostprogs-y) +always-y := $(hostprogs) clean-files := policy.* file_contexts
usr/Makefile +1 -1
@@ -52,7 +52,7 @@ ifeq ($(cpio-data),) cpio-data := $(obj)/initramfs_data.cpio -hostprogs-y := gen_init_cpio +hostprogs := gen_init_cpio # .initramfs_data.cpio.d is used to identify all files included # in initramfs and to detect if any files are added/removed.
Signature · 1 line
2.17.1