4.4.213-stable review

This is the start of the stable review cycle for the 4.4.213 release. There are 53 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed, 05 Feb 2020 16:17:59 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.213-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.213-rc1

Praveen Chaudhary <[email protected]>

    net: Fix skb->csum update in inet_proto_csum_replace16().

Vasily Averin <[email protected]>
l2t_seq_next should increase position index

Vasily Averin <[email protected]>
seq_tab_next() should increase position index

Finn Thain <[email protected]>
net/sonic: Quiesce SONIC before re-initializing descriptor memory

Finn Thain <[email protected]>
net/sonic: Fix receive buffer handling

Finn Thain <[email protected]>
net/sonic: Use MMIO accessors

Finn Thain <[email protected]>
net/sonic: Add mutual exclusion for accessing shared state

Madalin Bucur <[email protected]>

    net/fsl: treat fsl,erratum-a011043

Manish Chopra <[email protected]>
qlcnic: Fix CPU soft lockup while collecting firmware dump

Hayes Wang <[email protected]>
r8152: get default setting of WOL before initializing

Michael Ellerman <[email protected]>
airo: Add missing CAP_NET_ADMIN check in AIROOLDIOCTL/SIOCDEVPRIVATE

Michael Ellerman <[email protected]>
airo: Fix possible info leak in AIROOLDIOCTL/SIOCDEVPRIVATE

Vladimir Murzin <[email protected]>
ARM: 8955/1: virt: Relax arch timer version check during early boot

Hannes Reinecke <[email protected]>
scsi: fnic: do not queue commands during fwreset

Nicolas Dichtel <[email protected]>
vti[6]: fix packet tx through bpf_redirect()

Johan Hovold <[email protected]>
Input: aiptek - use descriptors of current altsetting

Arnd Bergmann <[email protected]>
wireless: wext: avoid gcc -O3 warning

Cambda Zhu <[email protected]>
ixgbe: Fix calculation of queue with VFs and flow director on interface flap

Radoslaw Tyl <[email protected]>
ixgbevf: Remove limit of 10 entries for unicast filter list

Lubomir Rintel <[email protected]>
clk: mmp2: Fix the order of timer mux parents

Lee Jones <[email protected]>

    media: si470x-i2c: Move free() past last use of 'radio'

Bin Liu <[email protected]>
usb: dwc3: turn off VBUS when leaving host mode

Zhenzhong Duan <[email protected]>
ttyprintk: fix a potential deadlock in interrupt context issue

Hans Verkuil <[email protected]>
media: dvb-usb/dvb-usb-urb.c: initialize actlen to 0

Hans Verkuil <[email protected]>
media: gspca: zero usb_buf

Sean Young <[email protected]>
media: digitv: don't continue if remote control state can't be read

Jan Kara <[email protected]>
reiserfs: Fix memory leak of journal device string

Dan Carpenter <[email protected]>
mm/mempolicy.c: fix out of bounds write in mpol_parse_str()

Dirk Behme <[email protected]>
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'

Herbert Xu <[email protected]>
crypto: pcrypt - Fix user-after-free on module unload

Al Viro <[email protected]>
vfs: fix do_last() regression

Herbert Xu <[email protected]>
crypto: af_alg - Use bh_lock_sock in sk_destruct

Eric Dumazet <[email protected]>
net_sched: ematch: reject invalid TCF_EM_SIMPLE

Laura Abbott <[email protected]>
usb-storage: Disable UAS on JMicron SATA enclosure

Arnd Bergmann <[email protected]>
atm: eni: fix uninitialized variable warning

Krzysztof Kozlowski <[email protected]>
net: wan: sdla: Fix cast from pointer to integer of different size

Fenghua Yu <[email protected]>
drivers/net/b44: Change to non-atomic bit operations on pwol_mask

Andreas Kemnade <[email protected]>
watchdog: rn5t618_wdt: fix module aliases

Johan Hovold <[email protected]>
zd1211rw: fix storage endpoint lookup

Johan Hovold <[email protected]>
rtl8xxxu: fix interface sanity check

Johan Hovold <[email protected]>
brcmfmac: fix interface sanity check

Johan Hovold <[email protected]>
ath9k: fix storage endpoint lookup

Malcolm Priestley <[email protected]>
staging: vt6656: Fix false Tx excessive retries reporting.

Malcolm Priestley <[email protected]>
staging: vt6656: use NULLFUCTION stack on mac80211

Malcolm Priestley <[email protected]>
staging: vt6656: correct packet types for CTS protect, mode.

Colin Ian King <[email protected]>
staging: wlan-ng: ensure error return is actually returned

Andrey Shvetsov <[email protected]>
staging: most: net: fix buffer overflow

Johan Hovold <[email protected]>
USB: serial: ir-usb: fix IrLAP framing

Johan Hovold <[email protected]>
USB: serial: ir-usb: fix link-speed handling

Johan Hovold <[email protected]>
USB: serial: ir-usb: add missing endpoint sanity check

Johan Hovold <[email protected]>
rsi_91x_usb: fix interface sanity check

Johan Hovold <[email protected]>
orinoco_usb: fix interface sanity check

Takashi Iwai <[email protected]>
ALSA: pcm: Add missing copy ops check before clearing buffer

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/kernel/hyp-stub.S                         |   7 +-
 arch/arm64/boot/Makefile                           |   2 +-
 crypto/af_alg.c                                    |   6 +-
 crypto/pcrypt.c                                    |   3 +-
 drivers/atm/eni.c                                  |   4 +-
 drivers/char/ttyprintk.c                           |  15 ++-
 drivers/clk/mmp/clk-of-mmp2.c                      |   2 +-
 drivers/input/tablet/aiptek.c                      |   2 +-
 drivers/media/radio/si470x/radio-si470x-i2c.c      |   2 +-
 drivers/media/usb/dvb-usb/digitv.c                 |  10 +-
 drivers/media/usb/dvb-usb/dvb-usb-urb.c            |   2 +-
 drivers/media/usb/gspca/gspca.c                    |   2 +-
 drivers/net/ethernet/broadcom/b44.c                |   9 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c |   3 +-
 drivers/net/ethernet/chelsio/cxgb4/l2t.c           |   3 +-
 drivers/net/ethernet/freescale/xgmac_mdio.c        |   7 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c      |  37 ++++--
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c  |   5 -
 drivers/net/ethernet/natsemi/sonic.c               | 109 ++++++++++++++---
 drivers/net/ethernet/natsemi/sonic.h               |  25 ++--
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c  |   1 +
 .../net/ethernet/qlogic/qlcnic/qlcnic_minidump.c   |   2 +
 drivers/net/usb/r8152.c                            |   9 +-
 drivers/net/wan/sdla.c                             |   2 +-
 drivers/net/wireless/airo.c                        |  20 ++-
 drivers/net/wireless/ath/ath9k/hif_usb.c           |   2 +-
 drivers/net/wireless/brcm80211/brcmfmac/usb.c      |   4 +-
 drivers/net/wireless/orinoco/orinoco_usb.c         |   4 +-
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c   |   2 +-
 drivers/net/wireless/rsi/rsi_91x_usb.c             |   2 +-
 drivers/net/wireless/zd1211rw/zd_usb.c             |   2 +-
 drivers/scsi/fnic/fnic_scsi.c                      |   3 +
 drivers/staging/most/aim-network/networking.c      |  10 ++
 drivers/staging/vt6656/device.h                    |   2 +
 drivers/staging/vt6656/int.c                       |   6 +-
 drivers/staging/vt6656/main_usb.c                  |   1 +
 drivers/staging/vt6656/rxtx.c                      |  26 ++--
 drivers/staging/wlan-ng/prism2mgmt.c               |   2 +-
 drivers/usb/dwc3/core.c                            |   3 +
 drivers/usb/serial/ir-usb.c                        | 136 ++++++++++++++++-----
 drivers/usb/storage/unusual_uas.h                  |   7 +-
 drivers/watchdog/rn5t618_wdt.c                     |   1 +
 fs/namei.c                                         |   4 +-
 fs/reiserfs/super.c                                |   2 +
 include/linux/usb/irda.h                           |  13 +-
 mm/mempolicy.c                                     |   6 +-
 net/core/utils.c                                   |  20 ++-
 net/ipv4/ip_vti.c                                  |  13 +-
 net/ipv6/ip6_vti.c                                 |  13 +-
 net/sched/ematch.c                                 |   3 +
 net/wireless/wext-core.c                           |   3 +-
 sound/core/pcm_native.c                            |   2 +-
 53 files changed, 418 insertions(+), 167 deletions(-)

From: Takashi Iwai <[email protected]>

[ this is a fix specific to 4.4.y and 4.9.y stable trees;
4.14.y and older already contain the right fix ]

The stable 4.4.y and 4.9.y backports of the upstream commit add9d56d7b37 ("ALSA: pcm: Avoid possible info leaks from PCM stream buffers") dropped the check of substream->ops->copy_user as copy_user is a new member that isn't present in the older kernels. Although upstream drivers should work without this NULL check, it may cause a regression with a downstream driver that sets some inaccessible address to runtime->dma_area, leading to a crash at worst.

Since such drivers must have ops->copy member on older kernels instead of ops->copy_user, this patch adds the missing check of ops->copy for fixing the regression.

---
 sound/core/pcm_native.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -588,7 +588,7 @@ static int snd_pcm_hw_params(struct snd_
 		runtime->boundary *= 2;
 
 	/* clear the buffer for avoiding possible kernel info leaks */
-	if (runtime->dma_area)
+	if (runtime->dma_area && !substream->ops->copy)
 		memset(runtime->dma_area, 0, runtime->dma_bytes);
 
 	snd_pcm_timer_resolution_change(substream);

From: Johan Hovold <[email protected]>

commit b73e05aa543cf8db4f4927e36952360d71291d41 upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/orinoco/orinoco_usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1601,9 +1601,9 @@ static int ezusb_probe(struct usb_interf
 	/* set up the endpoint information */
 	/* check out the endpoints */
 
-	iface_desc = &interface->altsetting[0].desc;
+	iface_desc = &interface->cur_altsetting->desc;
 	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
-		ep = &interface->altsetting[0].endpoint[i].desc;
+		ep = &interface->cur_altsetting->endpoint[i].desc;
 
 		if (usb_endpoint_is_bulk_in(ep)) {
 			/* we found a bulk in endpoint */

From: Johan Hovold <[email protected]>

commit 3139b180906af43bc09bd3373fc2338a8271d9d9 upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -103,7 +103,7 @@ static int rsi_find_bulk_in_and_out_endp
 	__le16 buffer_size;
 	int ii, bep_found = 0;
 
-	iface_desc = &(interface->altsetting[0]);
+	iface_desc = interface->cur_altsetting;
 
 	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
 		endpoint = &(iface_desc->endpoint[ii].desc);

From: Johan Hovold <[email protected]>

commit 2988a8ae7476fe9535ab620320790d1714bdad1d upstream.

Add missing endpoint sanity check to avoid dereferencing a NULL-pointer on open() in case a device lacks a bulk-out endpoint.

Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") the oops would instead happen on open() if the device lacked a bulk-in endpoint and on write() if it lacked a bulk-out endpoint.

---
 drivers/usb/serial/ir-usb.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -198,6 +198,9 @@ static int ir_startup(struct usb_serial
 {
 	struct usb_irda_cs_descriptor *irda_desc;
 
+	if (serial->num_bulk_in < 1 || serial->num_bulk_out < 1)
+		return -ENODEV;
+
 	irda_desc = irda_usb_find_class_desc(serial, 0);
 	if (!irda_desc) {
 		dev_err(&serial->dev->dev,

From: Johan Hovold <[email protected]>

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl).

---
 drivers/usb/serial/ir-usb.c |   20 ++++++++++----------
 include/linux/usb/irda.h    |   13 ++++++++++++-
 2 files changed, 22 insertions(+), 11 deletions(-)

@@ -336,34 +336,34 @@ static void ir_set_termios(struct tty_st
 
 	switch (baud) {
 	case 2400:
-		ir_baud = USB_IRDA_BR_2400;
+		ir_baud = USB_IRDA_LS_2400;
 		break;
 	case 9600:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		break;
 	case 19200:
-		ir_baud = USB_IRDA_BR_19200;
+		ir_baud = USB_IRDA_LS_19200;
 		break;
 	case 38400:
-		ir_baud = USB_IRDA_BR_38400;
+		ir_baud = USB_IRDA_LS_38400;
 		break;
 	case 57600:
-		ir_baud = USB_IRDA_BR_57600;
+		ir_baud = USB_IRDA_LS_57600;
 		break;
 	case 115200:
-		ir_baud = USB_IRDA_BR_115200;
+		ir_baud = USB_IRDA_LS_115200;
 		break;
 	case 576000:
-		ir_baud = USB_IRDA_BR_576000;
+		ir_baud = USB_IRDA_LS_576000;
 		break;
 	case 1152000:
-		ir_baud = USB_IRDA_BR_1152000;
+		ir_baud = USB_IRDA_LS_1152000;
 		break;
 	case 4000000:
-		ir_baud = USB_IRDA_BR_4000000;
+		ir_baud = USB_IRDA_LS_4000000;
 		break;
 	default:
-		ir_baud = USB_IRDA_BR_9600;
+		ir_baud = USB_IRDA_LS_9600;
 		baud = 9600;
 	}
 

@@ -118,11 +118,22 @@ struct usb_irda_cs_descriptor {
  * 6 - 115200 bps
  * 7 - 576000 bps
  * 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
  * 10..15 - Reserved
  */
 #define USB_IRDA_STATUS_LINK_SPEED	0x0f
 
+#define USB_IRDA_LS_NO_CHANGE		0
+#define USB_IRDA_LS_2400		1
+#define USB_IRDA_LS_9600		2
+#define USB_IRDA_LS_19200		3
+#define USB_IRDA_LS_38400		4
+#define USB_IRDA_LS_57600		5
+#define USB_IRDA_LS_115200		6
+#define USB_IRDA_LS_576000		7
+#define USB_IRDA_LS_1152000		8
+#define USB_IRDA_LS_4000000		9
+
 /* The following is a 4-bit value used only for
  * outbound header:
  *

From: Johan Hovold <[email protected]>

commit 38c0d5bdf4973f9f5a888166e9d3e9ed0d32057a upstream.

Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") switched to using the generic write implementation which may combine multiple write requests into larger transfers. This can break the IrLAP protocol where end-of-frame is determined using the USB short packet mechanism, for example, if multiple frames are sent in rapid succession.

---
 drivers/usb/serial/ir-usb.c |  113 +++++++++++++++++++++++++++++++++++---------
 1 file changed, 91 insertions(+), 22 deletions(-)

@@ -49,9 +49,10 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size);
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count);
+static int ir_write_room(struct tty_struct *tty);
+static void ir_write_bulk_callback(struct urb *urb);
 static void ir_process_read_urb(struct urb *urb);
 static void ir_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios);

@@ -81,8 +82,9 @@ static struct usb_serial_driver ir_devic
 	.num_ports		= 1,
 	.set_termios		= ir_set_termios,
 	.attach			= ir_startup,
-	.open			= ir_open,
-	.prepare_write_buffer	= ir_prepare_write_buffer,
+	.write			= ir_write,
+	.write_room		= ir_write_room,
+	.write_bulk_callback	= ir_write_bulk_callback,
 	.process_read_urb	= ir_process_read_urb,
 };
 

@@ -255,35 +257,102 @@ static int ir_startup(struct usb_serial
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+		const unsigned char *buf, int count)
 {
-	int i;
+	struct urb *urb = NULL;
+	unsigned long flags;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
-		port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET;
+	if (port->bulk_out_size == 0)
+		return -EINVAL;
 
-	/* Start reading from the device */
-	return usb_serial_generic_open(tty, port);
-}
+	if (count == 0)
+		return 0;
 
-static int ir_prepare_write_buffer(struct usb_serial_port *port,
-						void *dest, size_t size)
-{
-	unsigned char *buf = dest;
-	int count;
+	count = min(count, port->bulk_out_size - 1);
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (__test_and_clear_bit(0, &port->write_urbs_free)) {
+		urb = port->write_urbs[0];
+		port->tx_bytes += count;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	if (!urb)
+		return 0;
 
 	/*
 	 * The first byte of the packet we send to the device contains an
-	 * inbound header which indicates an additional number of BOFs and
+	 * outbound header which indicates an additional number of BOFs and
 	 * a baud rate change.
 	 *
 	 * See section 5.4.2.2 of the USB IrDA spec.
 	 */
-	*buf = ir_xbof | ir_baud;
+	*(u8 *)urb->transfer_buffer = ir_xbof | ir_baud;
+
+	memcpy(urb->transfer_buffer + 1, buf, count);
+
+	urb->transfer_buffer_length = count + 1;
+	urb->transfer_flags = URB_ZERO_PACKET;
+
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret) {
+		dev_err(&port->dev, "failed to submit write urb: %d\n", ret);
+
+		spin_lock_irqsave(&port->lock, flags);
+		__set_bit(0, &port->write_urbs_free);
+		port->tx_bytes -= count;
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		return ret;
+	}
+
+	return count;
+}
+
+static void ir_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	__set_bit(0, &port->write_urbs_free);
+	port->tx_bytes -= urb->transfer_buffer_length - 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev_dbg(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	case -EPIPE:
+		dev_err(&port->dev, "write urb stopped: %d\n", status);
+		return;
+	default:
+		dev_err(&port->dev, "nonzero write-urb status: %d\n", status);
+		break;
+	}
+
+	usb_serial_port_softint(port);
+}
+
+static int ir_write_room(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	int count = 0;
+
+	if (port->bulk_out_size == 0)
+		return 0;
+
+	if (test_bit(0, &port->write_urbs_free))
+		count = port->bulk_out_size - 1;
 
-	count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1,
-								&port->lock);
-	return count + 1;
+	return count;
 }
 
 static void ir_process_read_urb(struct urb *urb)

From: Andrey Shvetsov <[email protected]>

commit 4d1356ac12f4d5180d0df345d85ff0ee42b89c72 upstream.

If the length of the socket buffer is 0xFFFFFFFF (max size for an unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14 (ETH_HLEN). Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN) which overflows and results in a value of 2. These values for payload_len and mdp_len will pass current buffer size checks.

This patch checks if derived from skb->len sum may overflow.

The check is based on the following idea:

For any unsigned V1, V2 and derived unsigned SUM = V1 + V2, V1 + V2 overflows iif SUM < V1.

---
 drivers/staging/most/aim-network/networking.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -87,6 +87,11 @@ static int skb_to_mamac(const struct sk_
 	unsigned int payload_len = skb->len - ETH_HLEN;
 	unsigned int mdp_len = payload_len + MDP_HDR_LEN;
 
+	if (mdp_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mdp_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mdp_len);

@@ -134,6 +139,11 @@ static int skb_to_mep(const struct sk_bu
 	u8 *buff = mbo->virt_address;
 	unsigned int mep_len = skb->len + MEP_HDR_LEN;
 
+	if (mep_len < skb->len) {
+		pr_err("drop: too large packet! (%u)\n", skb->len);
+		return -EINVAL;
+	}
+
 	if (mbo->buffer_length < mep_len) {
 		pr_err("drop: too small buffer! (%d for %d)\n",
 		       mbo->buffer_length, mep_len);

From: Colin Ian King <[email protected]>

commit 4cc41cbce536876678b35e03c4a8a7bb72c78fa9 upstream.

Currently when the call to prism2sta_ifst fails a netdev_err error is reported, error return variable result is set to -1 but the function always returns 0 for success. Fix this by returning the error value in variable result rather than 0.

Addresses-Coverity: ("Unused value")

---
 drivers/staging/wlan-ng/prism2mgmt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -940,7 +940,7 @@ int prism2mgmt_flashdl_state(wlandevice_
 		}
 	}
 
-	return 0;
+	return result;
 }
 
 /*----------------------------------------------------------------

From: Malcolm Priestley <[email protected]>

commit d971fdd3412f8342747778fb59b8803720ed82b1 upstream.

It appears that the driver still transmits in CTS protect mode even though it is not enabled in mac80211.

That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect. The only difference between them GA does not use B rates.

Find if only B rate in GB or GA in protect mode otherwise transmit packets as PK_TYPE_11A.

---
 drivers/staging/vt6656/device.h |    2 ++
 drivers/staging/vt6656/rxtx.c   |   12 ++++++++----
 2 files changed, 10 insertions(+), 4 deletions(-)

@@ -65,6 +65,8 @@
 #define RATE_AUTO	12
 
 #define MAX_RATE			12
+#define VNT_B_RATES	(BIT(RATE_1M) | BIT(RATE_2M) |\
+			BIT(RATE_5M) | BIT(RATE_11M))
 
 /*
  * device specific

@@ -815,10 +815,14 @@ int vnt_tx_packet(struct vnt_private *pr
 		if (info->band == IEEE80211_BAND_5GHZ) {
 			pkt_type = PK_TYPE_11A;
 		} else {
-			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
-				pkt_type = PK_TYPE_11GB;
-			else
-				pkt_type = PK_TYPE_11GA;
+			if (tx_rate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+				if (priv->basic_rates & VNT_B_RATES)
+					pkt_type = PK_TYPE_11GB;
+				else
+					pkt_type = PK_TYPE_11GA;
+			} else {
+				pkt_type = PK_TYPE_11A;
+			}
 		}
 	} else {
 		pkt_type = PK_TYPE_11B;

From: Malcolm Priestley <[email protected]>

commit d579c43c82f093e63639151625b2139166c730fd upstream.

It appears that the drivers does not go into power save correctly the NULL data packets are not being transmitted because it not enabled in mac80211.

The driver needs to capture ieee80211_is_nullfunc headers and copy the duration_id to it's own duration data header.

---
 drivers/staging/vt6656/main_usb.c |    1 +
 drivers/staging/vt6656/rxtx.c     |   14 +++++---------
 2 files changed, 6 insertions(+), 9 deletions(-)

@@ -1002,6 +1002,7 @@ vt6656_probe(struct usb_interface *intf,
 	ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
 	ieee80211_hw_set(priv->hw, REPORTS_TX_ACK_STATUS);
 	ieee80211_hw_set(priv->hw, SUPPORTS_PS);
+	ieee80211_hw_set(priv->hw, PS_NULLFUNC_STACK);
 
 	priv->hw->max_signal = 100;
 

@@ -280,11 +280,9 @@ static u16 vnt_rxtx_datahead_g(struct vn
 							PK_TYPE_11B, &buf->b);
 
 	/* Get Duration and TimeStamp */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration_a = dur;
-		buf->duration_b = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration_a = hdr->duration_id;
+		buf->duration_b = hdr->duration_id;
 	} else {
 		buf->duration_a = vnt_get_duration_le(priv,
 						tx_context->pkt_type, need_ack);

@@ -373,10 +371,8 @@ static u16 vnt_rxtx_datahead_ab(struct v
 			  tx_context->pkt_type, &buf->ab);
 
 	/* Get Duration and TimeStampOff */
-	if (ieee80211_is_pspoll(hdr->frame_control)) {
-		__le16 dur = cpu_to_le16(priv->current_aid | BIT(14) | BIT(15));
-
-		buf->duration = dur;
+	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+		buf->duration = hdr->duration_id;
 	} else {
 		buf->duration = vnt_get_duration_le(priv, tx_context->pkt_type,
 						    need_ack);

From: Malcolm Priestley <[email protected]>

commit 9dd631fa99dc0a0dfbd191173bf355ba30ea786a upstream.

The driver reporting IEEE80211_TX_STAT_ACK is not being handled correctly. The driver should only report on TSR_TMO flag is not set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK is being requested.

---
 drivers/staging/vt6656/int.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -111,9 +111,11 @@ static int vnt_int_report_rate(struct vn
 
 	info->status.rates[0].count = tx_retry;
 
-	if (!(tsr & (TSR_TMO | TSR_RETRYTMO))) {
+	if (!(tsr & TSR_TMO)) {
 		info->status.rates[0].idx = idx;
-		info->flags |= IEEE80211_TX_STAT_ACK;
+
+		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+			info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
 	ieee80211_tx_status_irqsafe(priv->hw, context->skb);

From: Johan Hovold <[email protected]>

commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream.

Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1211,7 +1211,7 @@ err_fw:
 static int send_eject_command(struct usb_interface *interface)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
-	struct usb_host_interface *iface_desc = &interface->altsetting[0];
+	struct usb_host_interface *iface_desc = interface->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

From: Johan Hovold <[email protected]>

commit 3428fbcd6e6c0850b1a8b2a12082b7b2aabb3da3 upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/brcm80211/brcmfmac/usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1352,7 +1352,7 @@ brcmf_usb_probe(struct usb_interface *in
 		goto fail;
 	}
 
-	desc = &intf->altsetting[0].desc;
+	desc = &intf->cur_altsetting->desc;
 	if ((desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
 	    (desc->bInterfaceSubClass != 2) ||
 	    (desc->bInterfaceProtocol != 0xff)) {

@@ -1365,7 +1365,7 @@ brcmf_usb_probe(struct usb_interface *in
 
 	num_of_eps = desc->bNumEndpoints;
 	for (ep = 0; ep < num_of_eps; ep++) {
-		endpoint = &intf->altsetting[0].endpoint[ep].desc;
+		endpoint = &intf->cur_altsetting->endpoint[ep].desc;
 		endpoint_num = usb_endpoint_num(endpoint);
 		if (!usb_endpoint_xfer_bulk(endpoint))
 			continue;

From: Johan Hovold <[email protected]>

commit 39a4281c312f2d226c710bc656ce380c621a2b16 upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -5555,7 +5555,7 @@ static int rtl8xxxu_parse_usb(struct rtl
 	u8 dir, xtype, num;
 	int ret = 0;
 
-	host_interface = &interface->altsetting[0];
+	host_interface = interface->cur_altsetting;
 	interface_desc = &host_interface->desc;
 	endpoints = interface_desc->bNumEndpoints;
 

From: Johan Hovold <[email protected]>

commit 2d68bb2687abb747558b933e80845ff31570a49c upstream.

Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

---
 drivers/net/wireless/zd1211rw/zd_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1272,7 +1272,7 @@ static void print_id(struct usb_device *
 static int eject_installer(struct usb_interface *intf)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *iface_desc = &intf->altsetting[0];
+	struct usb_host_interface *iface_desc = intf->cur_altsetting;
 	struct usb_endpoint_descriptor *endpoint;
 	unsigned char *cmd;
 	u8 bulk_out_ep;

From: Andreas Kemnade <[email protected]>

[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ]

Platform device aliases were missing so module autoloading did not work.

---
 drivers/watchdog/rn5t618_wdt.c | 1 +
 1 file changed, 1 insertion(+)

index d1c12278cb6a1..8b6eff26e4808 100644
@@ -193,6 +193,7 @@ static struct platform_driver rn5t618_wdt_driver = {
 
 module_platform_driver(rn5t618_wdt_driver);
 
+MODULE_ALIAS("platform:rn5t618-wdt");
 MODULE_AUTHOR("Beniamino Galvani <[email protected]>");
 MODULE_DESCRIPTION("RN5T618 watchdog driver");
 MODULE_LICENSE("GPL v2");

2.20.1

From: Fenghua Yu <[email protected]>

[ Upstream commit f11421ba4af706cb4f5703de34fa77fba8472776 ]

Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS.

In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel.

Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations.

Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit().

---
 drivers/net/ethernet/broadcom/b44.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

index a3b1c07ae0af0..e7214edfe5b46 100644
@@ -1524,8 +1524,10 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
 	int ethaddr_bytes = ETH_ALEN;
 
 	memset(ppattern + offset, 0xff, magicsync);
-	for (j = 0; j < magicsync; j++)
-		set_bit(len++, (unsigned long *) pmask);
+	for (j = 0; j < magicsync; j++) {
+		pmask[len >> 3] |= BIT(len & 7);
+		len++;
+	}
 
 	for (j = 0; j < B44_MAX_PATTERNS; j++) {
 		if ((B44_PATTERN_SIZE - len) >= ETH_ALEN)

@@ -1537,7 +1539,8 @@ static int b44_magic_pattern(u8 *macaddr, u8 *ppattern, u8 *pmask, int offset)
 		for (k = 0; k< ethaddr_bytes; k++) {
 			ppattern[offset + magicsync +
 				(j * ETH_ALEN) + k] = macaddr[k];
-			set_bit(len++, (unsigned long *) pmask);
+			pmask[len >> 3] |= BIT(len & 7);
+			len++;
 		}
 	}
 	return len - 1;

2.20.1

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 00c0688cecadbf7ac2f5b4cdb36d912a2d3f0cca ]

Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture):

drivers/net/wan/sdla.c: In function ‘sdla_transmit’:
drivers/net/wan/sdla.c:711:13: warning:
cast to pointer from integer of different size [-Wint-to-pointer-cast]

---
 drivers/net/wan/sdla.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 421ac5f856994..79fd891509479 100644
@@ -711,7 +711,7 @@ static netdev_tx_t sdla_transmit(struct sk_buff *skb,
 
 					spin_lock_irqsave(&sdla_lock, flags);
 					SDLA_WINDOW(dev, addr);
-					pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
+					pbuf = (void *)(dev->mem_start + (addr & SDLA_ADDR_MASK));
 					__sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
 					SDLA_WINDOW(dev, addr);
 					pbuf->opp_flag = 1;

2.20.1

From: Arnd Bergmann <[email protected]>

[ Upstream commit 30780d086a83332adcd9362281201cee7c3d9d19 ]

With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]

   writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
             ^

drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.

---
 drivers/atm/eni.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 6339efd326972..ad591a2f7c822 100644
@@ -372,7 +372,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 		here = (eni_vcc->descr+skip) & (eni_vcc->words-1);
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) | (vcc->vci
 		    << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	here = (eni_vcc->descr+size+skip) & (eni_vcc->words-1);
 	if (!eff) size += skip;

@@ -445,7 +445,7 @@ static int do_rx_dma(struct atm_vcc *vcc,struct sk_buff *skb,
 	if (size != eff) {
 		dma[j++] = (here << MID_DMA_COUNT_SHIFT) |
 		    (vcc->vci << MID_DMA_VCI_SHIFT) | MID_DT_JK;
-		j++;
+		dma[j++] = 0;
 	}
 	if (!j || j > 2*RX_DMA_BUF) {
 		printk(KERN_CRIT DEV_LABEL "!j or j too big!!!\n");

2.20.1

From: Laura Abbott <[email protected]>

[ Upstream commit bc3bdb12bbb3492067c8719011576370e959a2e6 ]

Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems.

---
 drivers/usb/storage/unusual_uas.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

index 8ed80f28416fa..9aad6825947c8 100644
@@ -162,12 +162,15 @@ UNUSUAL_DEV(0x2537, 0x1068, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_UAS),
 
-/* Reported-by: Takeo Nakayama <[email protected]> */
+/*
+ * Initially Reported-by: Takeo Nakayama <[email protected]>
+ * UAS Ignore Reported by Steven Ellis <[email protected]>
+ */
 UNUSUAL_DEV(0x357d, 0x7788, 0x0000, 0x9999,
 		"JMicron",
 		"JMS566",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
-		US_FL_NO_REPORT_OPCODES),
+		US_FL_NO_REPORT_OPCODES | US_FL_IGNORE_UAS),
 
 /* Reported-by: Hans de Goede <[email protected]> */
 UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,

2.20.1

From: Eric Dumazet <[email protected]>

[ Upstream commit 55cd9f67f1e45de8517cdaab985fb8e56c0bc1d8 ]

It is possible for malicious userspace to set TCF_EM_SIMPLE bit even for matches that should not have this bit set.

This can fool two places using tcf_em_is_simple()

1) tcf_em_tree_destroy() -> memory leak of em->data if ops->destroy() is NULL

2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes of a kernel pointer.

BUG: memory leak
unreferenced object 0xffff888121850a40 (size 32):
  comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s)
  hex dump (first 32 bytes):
    00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline]
    [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline]
    [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline]
    [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671
    [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127
    [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline]
    [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32
    [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline]
    [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline]
    [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300
    [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline]
    [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219
    [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104
    [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415
    [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
    [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
    [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
    [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
    [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
    [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline]
    [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659
    [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
    [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
    [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
    [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline]
    [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline]
    [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424

---
 net/sched/ematch.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -242,6 +242,9 @@ static int tcf_em_validate(struct tcf_pr
 			goto errout;
 
 		if (em->ops->change) {
+			err = -EINVAL;
+			if (em_hdr->flags & TCF_EM_SIMPLE)
+				goto errout;
 			err = em->ops->change(net, data, data_len, em);
 			if (err < 0)
 				goto errout;

From: Herbert Xu <[email protected]>

commit 37f96694cf73ba116993a9d2d99ad6a75fa7fdb0 upstream.

As af_alg_release_parent may be called from BH context (most notably due to an async request that only completes after socket closure, or as reported here because of an RCU-delayed sk_destruct call), we must use bh_lock_sock instead of lock_sock.

---
 crypto/af_alg.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -136,11 +136,13 @@ void af_alg_release_parent(struct sock *
 	sk = ask->parent;
 	ask = alg_sk(sk);
 
-	lock_sock(sk);
+	local_bh_disable();
+	bh_lock_sock(sk);
 	ask->nokey_refcnt -= nokey;
 	if (!last)
 		last = !--ask->refcnt;
-	release_sock(sk);
+	bh_unlock_sock(sk);
+	local_bh_enable();
 
 	if (last)
 		sock_put(sk);

From: Al Viro <[email protected]>

commit 6404674acd596de41fd3ad5f267b4525494a891a upstream.

Brown paperbag time: fetching ->i_uid/->i_mode really should've been done from nd->inode. I even suggested that, but the reason for that has slipped through the cracks and I went for dir->d_inode instead - made for more "obvious" patch.

Analysis:

- at the entry into do_last() and all the way to step_into(): dir (aka nd->path.dentry) is known not to have been freed; so's nd->inode and it's equal to dir->d_inode unless we are already doomed to -ECHILD. inode of the file to get opened is not known.

- after step_into(): inode of the file to get opened is known; dir might be pointing to freed memory/be negative/etc.

- at the call of may_create_in_sticky(): guaranteed to be out of RCU mode; inode of the file to get opened is known and pinned; dir might be garbage.

The last was the reason for the original patch. Except that at the do_last() entry we can be in RCU mode and it is possible that nd->path.dentry->d_inode has already changed under us.

In that case we are going to fail with -ECHILD, but we need to be careful; nd->inode is pointing to valid struct inode and it's the same as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we should use that.

Wearing-brown-paperbag: Al Viro <[email protected]>

---
 fs/namei.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -3060,8 +3060,8 @@ static int do_last(struct nameidata *nd,
 		   int *opened)
 {
 	struct dentry *dir = nd->path.dentry;
-	kuid_t dir_uid = dir->d_inode->i_uid;
-	umode_t dir_mode = dir->d_inode->i_mode;
+	kuid_t dir_uid = nd->inode->i_uid;
+	umode_t dir_mode = nd->inode->i_mode;
 	int open_flag = op->open_flag;
 	bool will_truncate = (open_flag & O_TRUNC) != 0;
 	bool got_write = false;

From: Herbert Xu <[email protected]>

[ Upstream commit 07bfd9bdf568a38d9440c607b72342036011f727 ]

On module unload of pcrypt we must unregister the crypto algorithms first and then tear down the padata structure. As otherwise the crypto algorithms are still alive and can be used while the padata structure is being freed.

---
 crypto/pcrypt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index a5718c0a3dc4e..1348541da463a 100644
@@ -505,11 +505,12 @@ static int __init pcrypt_init(void)
 
 static void __exit pcrypt_exit(void)
 {
+	crypto_unregister_template(&pcrypt_tmpl);
+
 	pcrypt_fini_padata(&pencrypt);
 	pcrypt_fini_padata(&pdecrypt);
 
 	kset_unregister(pcrypt_kset);
-	crypto_unregister_template(&pcrypt_tmpl);
 }
 
 module_init(pcrypt_init);

2.20.1

From: Dirk Behme <[email protected]>

commit d7bbd6c1b01cb5dd13c245d4586a83145c1d5f52 upstream.

Since v4.3-rc1 commit 0723c05fb75e44 ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'.

Fix this by adding them to the target list.
Make sure to match the order of the recipes in the makefile.

---
 arch/arm64/boot/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -14,7 +14,7 @@
 # Based on the ia64 boot/Makefile.
 #
 
-targets := Image Image.gz
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)

From: Dan Carpenter <[email protected]>

commit c7a91bc7c2e17e0a9c8b9745a2cb118891218fd1 upstream.

What we are trying to do is change the '=' character to a NUL terminator and then at the end of the function we restore it back to an '='. The problem is there are two error paths where we jump to the end of the function before we have replaced the '=' with NUL.

We end up putting the '=' in the wrong place (possibly one element before the start of the buffer).

Dmitry Vyukov <[email protected]>

---
 mm/mempolicy.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -2701,6 +2701,9 @@ int mpol_parse_str(char *str, struct mem
 	char *flags = strchr(str, '=');
 	int err = 1;
 
+	if (flags)
+		*flags++ = '\0';	/* terminate mode string */
+
 	if (nodelist) {
 		/* NUL-terminate mode or flags string */
 		*nodelist++ = '\0';

@@ -2711,9 +2714,6 @@ int mpol_parse_str(char *str, struct mem
 	} else
 		nodes_clear(nodes);
 
-	if (flags)
-		*flags++ = '\0';	/* terminate mode string */
-
 	for (mode = 0; mode < MPOL_MAX; mode++) {
 		if (!strcmp(str, policy_modes[mode])) {
 			break;

From: Jan Kara <[email protected]>

commit 5474ca7da6f34fa95e82edc747d5faa19cbdfb5c upstream.

When a filesystem is mounted with jdev mount option, we store the journal device name in an allocated string in superblock. However we fail to ever free that string. Fix it.

---
 fs/reiserfs/super.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -599,6 +599,7 @@ static void reiserfs_put_super(struct su
 	reiserfs_write_unlock(s);
 	mutex_destroy(&REISERFS_SB(s)->lock);
 	destroy_workqueue(REISERFS_SB(s)->commit_wq);
+	kfree(REISERFS_SB(s)->s_jdev);
 	kfree(s->s_fs_info);
 	s->s_fs_info = NULL;
 }

@@ -2208,6 +2209,7 @@ error_unlocked:
 			kfree(qf_names[j]);
 	}
 #endif
+	kfree(sbi->s_jdev);
 	kfree(sbi);
 
 	s->s_fs_info = NULL;

From: Sean Young <[email protected]>

commit eecc70d22ae51225de1ef629c1159f7116476b2e upstream.

This results in an uninitialized variable read.

---
 drivers/media/usb/dvb-usb/digitv.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

@@ -226,18 +226,22 @@ static struct rc_map_table rc_map_digitv
 
 static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	int i;
+	int ret, i;
 	u8 key[5];
 	u8 b[4] = { 0 };
 
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4);
+	ret = digitv_ctrl_msg(d, USB_READ_REMOTE, 0, NULL, 0, &key[1], 4);
+	if (ret)
+		return ret;
 
 	/* Tell the device we've read the remote. Not sure how necessary
 	   this is, but the Nebula SDK does it. */
-	digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+	ret = digitv_ctrl_msg(d, USB_WRITE_REMOTE, 0, b, 4, NULL, 0);
+	if (ret)
+		return ret;
 
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)

From: Hans Verkuil <[email protected]>

commit de89d0864f66c2a1b75becfdd6bf3793c07ce870 upstream.

Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to ensure it is property zeroed. This fixes various syzbot errors about uninitialized data.

Syzbot links:

https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074
https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2
https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e

---
 drivers/media/usb/gspca/gspca.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2028,7 +2028,7 @@ int gspca_dev_probe2(struct usb_interfac
 		pr_err("couldn't kzalloc gspca struct\n");
 		return -ENOMEM;
 	}
-	gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+	gspca_dev->usb_buf = kzalloc(USB_BUF_SZ, GFP_KERNEL);
 	if (!gspca_dev->usb_buf) {
 		pr_err("out of memory\n");
 		ret = -ENOMEM;

From: Hans Verkuil <[email protected]>

commit 569bc8d6a6a50acb5fcf07fb10b8d2d461fdbf93 upstream.

This fixes a syzbot failure since actlen could be uninitialized, but it was still used.

Syzbot link:

https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1

---
 drivers/media/usb/dvb-usb/dvb-usb-urb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -11,7 +11,7 @@
 int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf,
 	u16 rlen, int delay_ms)
 {
-	int actlen,ret = -ENOMEM;
+	int actlen = 0, ret = -ENOMEM;
 
 	if (!d || wbuf == NULL || wlen == 0)
 		return -EINVAL;

From: Zhenzhong Duan <[email protected]>

commit 9a655c77ff8fc65699a3f98e237db563b37c439b upstream.

tpk_write()/tpk_close() could be interrupted when holding a mutex, then in timer handler tpk_write() may be called again trying to acquire same mutex, lead to deadlock.

Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP enabled:

BUG: sleeping function called from invalid context at

kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1 1 lock held by swapper/1/0:
...

Call Trace:
  <IRQ>
  dump_stack+0x197/0x210
  ___might_sleep.cold+0x1fb/0x23e
  __might_sleep+0x95/0x190
  __mutex_lock+0xc5/0x13c0
  mutex_lock_nested+0x16/0x20
  tpk_write+0x5d/0x340
  resync_tnc+0x1b6/0x320
  call_timer_fn+0x1ac/0x780
  run_timer_softirq+0x6c3/0x1790
  __do_softirq+0x262/0x98c
  irq_exit+0x19b/0x1e0
  smp_apic_timer_interrupt+0x1a3/0x610
  apic_timer_interrupt+0xf/0x20
  </IRQ>

See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for more details.

Fix it by using spinlock in process context instead of mutex and having interrupt disabled in critical section.

---
 drivers/char/ttyprintk.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

@@ -18,10 +18,11 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
-	struct mutex port_write_mutex;
+	spinlock_t spinlock;
 };
 
 static struct ttyprintk_port tpk_port;

@@ -107,11 +108,12 @@ static int tpk_open(struct tty_struct *t
 static void tpk_close(struct tty_struct *tty, struct file *filp)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	/* flush tpk_printk buffer */
 	tpk_printk(NULL, 0);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	tty_port_close(&tpkp->port, tty, filp);
 }

@@ -123,13 +125,14 @@ static int tpk_write(struct tty_struct *
 		const unsigned char *buf, int count)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 	int ret;
 
 
 	/* exclusive use of tpk_printk within this tty */
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	ret = tpk_printk(buf, count);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	return ret;
 }

@@ -179,7 +182,7 @@ static int __init ttyprintk_init(void)
 {
 	int ret = -ENOMEM;
 
-	mutex_init(&tpk_port.port_write_mutex);
+	spin_lock_init(&tpk_port.spinlock);
 
 	ttyprintk_driver = tty_alloc_driver(1,
 			TTY_DRIVER_RESET_TERMIOS |

From: Bin Liu <[email protected]>

[ Upstream commit 09ed259fac621634d51cd986aa8d65f035662658 ]

VBUS should be turned off when leaving the host mode.
Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power.

---
 drivers/usb/dwc3/core.c | 3 +++
 1 file changed, 3 insertions(+)

index 4378e758baef9..591bc3f7be763 100644
@@ -801,6 +801,9 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 		/* do nothing */
 		break;
 	}
+
+	/* de-assert DRVVBUS for HOST and OTG mode */
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 }
 
 #define DWC3_ALIGN_MASK		(16 - 1)

2.20.1

From: Lee Jones <[email protected]>

A pointer to 'struct si470x_device' is currently used after free:

drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference
preceded by free on line 460

Shift the call to free() down past its final use.

NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab234a ("media: si470x-i2c: add missed operations in remove") to the stable trees.

---
 drivers/media/radio/si470x/radio-si470x-i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -458,10 +458,10 @@ static int si470x_i2c_remove(struct i2c_
 
 	free_irq(client->irq, radio);
 	video_unregister_device(&radio->videodev);
-	kfree(radio);
 
 	v4l2_ctrl_handler_free(&radio->hdl);
 	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio);
 	return 0;
 }
 

From: Lubomir Rintel <[email protected]>

[ Upstream commit 8bea5ac0fbc5b2103f8779ddff216122e3c2e1ad ]

Determined empirically, no documentation is available.

The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of
commit f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")'

---
 drivers/clk/mmp/clk-of-mmp2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 8b45cb2caed1b..60db6531996eb 100644
@@ -134,7 +134,7 @@ static DEFINE_SPINLOCK(ssp3_lock);
 static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
 
 static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
+static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
 
 static DEFINE_SPINLOCK(reset_lock);
 

2.20.1

From: Radoslaw Tyl <[email protected]>

[ Upstream commit aa604651d523b1493988d0bf6710339f3ee60272 ]

Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed.

---
 drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 5 -----
 1 file changed, 5 deletions(-)

index 723bda33472a7..0fa94ebf0411b 100644
@@ -1861,11 +1861,6 @@ static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	int count = 0;
 
-	if ((netdev_uc_count(netdev)) > 10) {
-		pr_err("Too many unicast filters - No Space\n");
-		return -ENOSPC;
-	}
-
 	if (!netdev_uc_empty(netdev)) {
 		struct netdev_hw_addr *ha;
 

2.20.1

From: Cambda Zhu <[email protected]>

[ Upstream commit 4fad78ad6422d9bca62135bbed8b6abc4cbb85b8 ]

This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 37 ++++++++++++++-----
 1 file changed, 27 insertions(+), 10 deletions(-)

index 4521181aa0ed9..23fb344f9e1cf 100644
@@ -4532,7 +4532,7 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct hlist_node *node2;
 	struct ixgbe_fdir_filter *filter;
-	u64 action;
+	u8 queue;
 
 	spin_lock(&adapter->fdir_perfect_lock);
 

@@ -4541,17 +4541,34 @@ static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
 
 	hlist_for_each_entry_safe(filter, node2,
 				  &adapter->fdir_filter_list, fdir_node) {
-		action = filter->action;
-		if (action != IXGBE_FDIR_DROP_QUEUE && action != 0)
-			action =
-			(action >> ETHTOOL_RX_FLOW_SPEC_RING_VF_OFF) - 1;
+		if (filter->action == IXGBE_FDIR_DROP_QUEUE) {
+			queue = IXGBE_FDIR_DROP_QUEUE;
+		} else {
+			u32 ring = ethtool_get_flow_spec_ring(filter->action);
+			u8 vf = ethtool_get_flow_spec_ring_vf(filter->action);
+
+			if (!vf && (ring >= adapter->num_rx_queues)) {
+				e_err(drv, "FDIR restore failed without VF, ring: %u\n",
+				      ring);
+				continue;
+			} else if (vf &&
+				   ((vf > adapter->num_vfs) ||
+				     ring >= adapter->num_rx_queues_per_pool)) {
+				e_err(drv, "FDIR restore failed with VF, vf: %hhu, ring: %u\n",
+				      vf, ring);
+				continue;
+			}
+
+			/* Map the ring onto the absolute queue index */
+			if (!vf)
+				queue = adapter->rx_ring[ring]->reg_idx;
+			else
+				queue = ((vf - 1) *
+					adapter->num_rx_queues_per_pool) + ring;
+		}
 
 		ixgbe_fdir_write_perfect_filter_82599(hw,
-				&filter->filter,
-				filter->sw_idx,
-				(action == IXGBE_FDIR_DROP_QUEUE) ?
-				IXGBE_FDIR_DROP_QUEUE :
-				adapter->rx_ring[action]->reg_idx);
+				&filter->filter, filter->sw_idx, queue);
 	}
 
 	spin_unlock(&adapter->fdir_perfect_lock);

2.20.1

From: Arnd Bergmann <[email protected]>

[ Upstream commit e16119655c9e6c4aa5767cd971baa9c491f41b13 ]

After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning:

In function 'iw_handler_get_iwstats',
inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here

The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way.

Marking that function as noinline avoids the warning and leads to slightly smaller object code as well.

---
 net/wireless/wext-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index b50ee5d622e14..843d2cf1e6a6c 100644
@@ -656,7 +656,8 @@ struct iw_statistics *get_wireless_stats(struct net_device *dev)
 	return NULL;
 }
 
-static int iw_handler_get_iwstats(struct net_device *		dev,
+/* noinline to avoid a bogus warning with -O3 */
+static noinline int iw_handler_get_iwstats(struct net_device *	dev,
 				  struct iw_request_info *	info,
 				  union iwreq_data *		wrqu,
 				  char *			extra)

2.20.1

From: Johan Hovold <[email protected]>

[ Upstream commit cfa4f6a99fb183742cace65ec551b444852b8ef6 ]

Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings.

---
 drivers/input/tablet/aiptek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 40a166773c1b4..142f34a0a3cb6 100644
@@ -1731,7 +1731,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	aiptek->inputdev = inputdev;
 	aiptek->usbdev = usbdev;
 	aiptek->intf = intf;
-	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+	aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	aiptek->inDelay = 0;
 	aiptek->endDelay = 0;
 	aiptek->previousJitterable = 0;

2.20.1

From: Nicolas Dichtel <[email protected]>

[ Upstream commit 95224166a9032ff5d08fca633d37113078ce7d01 ]

With an ebpf program that redirects packets through a vti[6] interface, the packets are dropped because no dst is attached.

This could also be reproduced with an AF_PACKET socket, with the following python script (vti1 is an ip_vti interface):

import socket
send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0)

 # scapy
 # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request')
 # raw(p)
 req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00'
 send_s.sendto(req, ('vti1', 0x800, 0, 0))

---
 net/ipv4/ip_vti.c  | 13 +++++++++++--
 net/ipv6/ip6_vti.c | 13 +++++++++++--
 2 files changed, 22 insertions(+), 4 deletions(-)

index bbcbbc1cc2cc6..42dbd280dc9be 100644
@@ -195,8 +195,17 @@ static netdev_tx_t vti_xmit(struct sk_buff *skb, struct net_device *dev,
 	int err;
 
 	if (!dst) {
-		dev->stats.tx_carrier_errors++;
-		goto tx_error_icmp;
+		struct rtable *rt;
+
+		fl->u.ip4.flowi4_oif = dev->ifindex;
+		fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+		rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+		if (IS_ERR(rt)) {
+			dev->stats.tx_carrier_errors++;
+			goto tx_error_icmp;
+		}
+		dst = &rt->dst;
+		skb_dst_set(skb, dst);
 	}
 
 	dst_hold(dst);

index 51da5987952ce..623963a2d8a68 100644
@@ -441,8 +441,17 @@ vti6_xmit(struct sk_buff *skb, struct net_device *dev, struct flowi *fl)
 	int err = -1;
 	int mtu;
 
-	if (!dst)
-		goto tx_err_link_failure;
+	if (!dst) {
+		fl->u.ip6.flowi6_oif = dev->ifindex;
+		fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+		dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+		if (dst->error) {
+			dst_release(dst);
+			dst = NULL;
+			goto tx_err_link_failure;
+		}
+		skb_dst_set(skb, dst);
+	}
 
 	dst_hold(dst);
 	dst = xfrm_lookup(t->net, dst, fl, NULL, 0);

2.20.1

From: Hannes Reinecke <[email protected]>

[ Upstream commit 0e2209629fec427ba75a6351486153a9feddd36b ]

When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped.

As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine.

Which of course confuses the hell out of the scsi midlayer.

So fix this by not queueing commands when fnic_cleanup_io is active.

---
 drivers/scsi/fnic/fnic_scsi.c | 3 +++
 1 file changed, 3 insertions(+)

index 82e4bc8c11c57..fc6706b12ac76 100644
@@ -446,6 +446,9 @@ static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_
 	if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED)))
 		return SCSI_MLQUEUE_HOST_BUSY;
 
+	if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_FWRESET)))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	rport = starget_to_rport(scsi_target(sc->device));
 	ret = fc_remote_port_chkready(rport);
 	if (ret) {

2.20.1

From: Vladimir Murzin <[email protected]>

[ Upstream commit 6849b5eba1965ceb0cad3a75877ef4569dd3638e ]

Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to have values other than 0 or 1 while still preserving backward compatibility. At the moment, Linux is quite strict in the way it handles this field at early boot and will not configure arch timer if it doesn't find the value 1.

Since here use ubfx for arch timer version extraction (hyb-stub build with -march=armv7-a, so it is safe)

To help backports (even though the code was correct at the time of writing)

---
 arch/arm/kernel/hyp-stub.S | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

index 2a55373f49bfb..f9948363111d1 100644
@@ -144,10 +144,9 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
-	lsr	r7, #16
-	and	r7, #0xf
-	cmp	r7, #1
-	bne	1f
+	ubfx	r7, r7, #16, #4
+	teq	r7, #0
+	beq	1f
 	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
 	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
 	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL

2.20.1

From: Michael Ellerman <[email protected]>

[ Upstream commit d6bce2137f5d6bb1093e96d2f801479099b28094 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes.

That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer.

Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer:

	// read the rid length field
	bap_read(ai, pBuf, 2, BAP1);
	// length for remaining part of rid
	len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2;
	...
	// read remainder of the rid
	rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1);

PC4500_readrid() then returns to readrids() which does:

	len = comp->len;
	if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {

Where comp->len is the user controlled length field.

So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace.

Fix it by kzalloc()'ing the buffer.

Found by Ilja by code inspection, not tested as I don't have the required hardware.

---
 drivers/net/wireless/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 82d24f2b9c190..94df9ddfb7eb1 100644
@@ -7831,7 +7831,7 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 		return -EINVAL;
 	}
 
-	if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+	if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 
 	PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1);

2.20.1

From: Michael Ellerman <[email protected]>

[ Upstream commit 78f7a7566f5eb59321e99b55a6fdb16ea05b37d1 ]

The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl().

The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode".

There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM.

However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV.

Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check.

Found by Ilja by code inspection, not tested as I don't have the required hardware.

---
 drivers/net/wireless/airo.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

index 94df9ddfb7eb1..a44496d8423ab 100644
@@ -7808,16 +7808,8 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 	case AIROGVLIST:    ridcode = RID_APLIST;       break;
 	case AIROGDRVNAM:   ridcode = RID_DRVNAME;      break;
 	case AIROGEHTENC:   ridcode = RID_ETHERENCAP;   break;
-	case AIROGWEPKTMP:  ridcode = RID_WEP_TEMP;
-		/* Only super-user can read WEP keys */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		break;
-	case AIROGWEPKNV:   ridcode = RID_WEP_PERM;
-		/* Only super-user can read WEP keys */
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		break;
+	case AIROGWEPKTMP:  ridcode = RID_WEP_TEMP;	break;
+	case AIROGWEPKNV:   ridcode = RID_WEP_PERM;	break;
 	case AIROGSTAT:     ridcode = RID_STATUS;       break;
 	case AIROGSTATSD32: ridcode = RID_STATSDELTA;   break;
 	case AIROGSTATSC32: ridcode = RID_STATS;        break;

@@ -7831,6 +7823,12 @@ static int readrids(struct net_device *dev, aironet_ioctl *comp) {
 		return -EINVAL;
 	}
 
+	if (ridcode == RID_WEP_TEMP || ridcode == RID_WEP_PERM) {
+		/* Only super-user can read WEP keys */
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+	}
+
 	if ((iobuf = kzalloc(RIDSIZE, GFP_KERNEL)) == NULL)
 		return -ENOMEM;
 

2.20.1

From: Hayes Wang <[email protected]>

[ Upstream commit 9583a3638dc07cc1878f41265e85ed497f72efcb ]

Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing.

---
 drivers/net/usb/r8152.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

index db8b489b0513c..23e299c86b814 100644
@@ -4313,6 +4313,11 @@ static int rtl8152_probe(struct usb_interface *intf,
 
 	intf->needs_remote_wakeup = 1;
 
+	if (!rtl_can_wakeup(tp))
+		__rtl_set_wol(tp, 0);
+	else
+		tp->saved_wolopts = __rtl_get_wol(tp);
+
 	tp->rtl_ops.init(tp);
 	set_ethernet_addr(tp);
 

@@ -4325,10 +4330,6 @@ static int rtl8152_probe(struct usb_interface *intf,
 		goto out1;
 	}
 
-	if (!rtl_can_wakeup(tp))
-		__rtl_set_wol(tp, 0);
-
-	tp->saved_wolopts = __rtl_get_wol(tp);
 	if (tp->saved_wolopts)
 		device_set_wakeup_enable(&udev->dev, true);
 	else

2.20.1

From: Manish Chopra <[email protected]>

[ Upstream commit 22e984493a41bf8081f13d9ed84def3ca8cfd427 ]

Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic.

---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 1 +
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c  | 2 ++
 2 files changed, 3 insertions(+)

index bf892160dd5f0..26263a192a77e 100644
@@ -2047,6 +2047,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev,
 			break;
 		}
 		entry += p_hdr->size;
+		cond_resched();
 	}
 	p_dev->ahw->reset.seq_index = index;
 }

index cda9e604a95f6..e5ea8e972b915 100644
@@ -703,6 +703,7 @@ static u32 qlcnic_read_memory_test_agent(struct qlcnic_adapter *adapter,
 		addr += 16;
 		reg_read -= 16;
 		ret += 16;
+		cond_resched();
 	}
 out:
 	mutex_unlock(&adapter->ahw->mem_lock);

@@ -1383,6 +1384,7 @@ int qlcnic_dump_fw(struct qlcnic_adapter *adapter)
 		buf_offset += entry->hdr.cap_size;
 		entry_offset += entry->hdr.offset;
 		buffer = fw_dump->data + buf_offset;
+		cond_resched();
 	}
 
 	fw_dump->clr = 1;

2.20.1

From: Madalin Bucur <[email protected]>

[ Upstream commit 1d3ca681b9d9575ccf696ebc2840a1ebb1fd4074 ]

When fsl,erratum-a011043 is set, adjust for erratum A011043:
MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.

---
 drivers/net/ethernet/freescale/xgmac_mdio.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

index 7b8fe866f6038..a15b4a97c172d 100644
@@ -49,6 +49,7 @@ struct tgec_mdio_controller {
 struct mdio_fsl_priv {
 	struct	tgec_mdio_controller __iomem *mdio_base;
 	bool	is_little_endian;
+	bool	has_a011043;
 };
 
 static u32 xgmac_read32(void __iomem *regs,

@@ -226,7 +227,8 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
 		return ret;
 
 	/* Return all Fs if nothing was there */
-	if (xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) {
+	if ((xgmac_read32(&regs->mdio_stat, endian) & MDIO_STAT_RD_ER) &&
+	    !priv->has_a011043) {
 		dev_err(&bus->dev,
 			"Error while reading PHY%d reg at %d.%hhu\n",
 			phy_id, dev_addr, regnum);

@@ -277,6 +279,9 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
 	else
 		priv->is_little_endian = false;
 
+	priv->has_a011043 = of_property_read_bool(pdev->dev.of_node,
+						  "fsl,erratum-a011043");
+
 	ret = of_mdiobus_register(bus, np);
 	if (ret) {
 		dev_err(&pdev->dev, "cannot register MDIO bus\n");

2.20.1

From: Finn Thain <[email protected]>

[ Upstream commit 865ad2f2201dc18685ba2686f13217f8b3a9c52c ]

The netif_stop_queue() call in sonic_send_packet() races with the netif_wake_queue() call in sonic_interrupt(). This causes issues like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out". Fix this by disabling interrupts when accessing tx_skb[] and next_tx. Update a comment to clarify the synchronization properties.

---
 drivers/net/ethernet/natsemi/sonic.c | 49 ++++++++++++++++++++--------
 drivers/net/ethernet/natsemi/sonic.h |  1 +
 2 files changed, 36 insertions(+), 14 deletions(-)

index 6679005782499..0374e834f865e 100644
@@ -50,6 +50,8 @@ static int sonic_open(struct net_device *dev)
 	if (sonic_debug > 2)
 		printk("sonic_open: initializing sonic driver.\n");
 
+	spin_lock_init(&lp->lock);
+
 	for (i = 0; i < SONIC_NUM_RRS; i++) {
 		struct sk_buff *skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
 		if (skb == NULL) {

@@ -194,8 +196,6 @@ static void sonic_tx_timeout(struct net_device *dev)
  *   wake the tx queue
  * Concurrently with all of this, the SONIC is potentially writing to
  * the status flags of the TDs.
- * Until some mutual exclusion is added, this code will not work with SMP. However,
- * MIPS Jazz machines and m68k Macs were all uni-processor machines.
  */
 
 static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)

@@ -203,7 +203,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	struct sonic_local *lp = netdev_priv(dev);
 	dma_addr_t laddr;
 	int length;
-	int entry = lp->next_tx;
+	int entry;
+	unsigned long flags;
 
 	if (sonic_debug > 2)
 		printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev);

@@ -226,6 +227,10 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_OK;
 	}
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	entry = lp->next_tx;
+
 	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
 	sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1);   /* single fragment */
 	sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */

@@ -235,10 +240,6 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 	sonic_tda_put(dev, entry, SONIC_TD_LINK,
 		sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);
 
-	/*
-	 * Must set tx_skb[entry] only after clearing status, and
-	 * before clearing EOL and before stopping queue
-	 */
 	wmb();
 	lp->tx_len[entry] = length;
 	lp->tx_laddr[entry] = laddr;

@@ -263,6 +264,8 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
 
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	return NETDEV_TX_OK;
 }
 

@@ -275,9 +278,21 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	struct sonic_local *lp = netdev_priv(dev);
 	int status;
+	unsigned long flags;
+
+	/* The lock has two purposes. Firstly, it synchronizes sonic_interrupt()
+	 * with sonic_send_packet() so that the two functions can share state.
+	 * Secondly, it makes sonic_interrupt() re-entrant, as that is required
+	 * by macsonic which must use two IRQs with different priority levels.
+	 */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	if (!status) {
+		spin_unlock_irqrestore(&lp->lock, flags);
 
-	if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT))
 		return IRQ_NONE;
+	}
 
 	do {
 		if (status & SONIC_INT_PKTRX) {

@@ -292,11 +307,12 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 			int td_status;
 			int freed_some = 0;
 
-			/* At this point, cur_tx is the index of a TD that is one of:
-			 *   unallocated/freed                          (status set   & tx_skb[entry] clear)
-			 *   allocated and sent                         (status set   & tx_skb[entry] set  )
-			 *   allocated and not yet sent                 (status clear & tx_skb[entry] set  )
-			 *   still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear)
+			/* The state of a Transmit Descriptor may be inferred
+			 * from { tx_skb[entry], td_status } as follows.
+			 * { clear, clear } => the TD has never been used
+			 * { set,   clear } => the TD was handed to SONIC
+			 * { set,   set   } => the TD was handed back
+			 * { clear, set   } => the TD is available for re-use
 			 */
 
 			if (sonic_debug > 2)

@@ -398,7 +414,12 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 		/* load CAM done */
 		if (status & SONIC_INT_LCD)
 			SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */
-	} while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT));
+
+		status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	} while (status);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	return IRQ_HANDLED;
 }
 

index 07091dd27e5df..1fd61d7f79bcb 100644
@@ -320,6 +320,7 @@ struct sonic_local {
 	unsigned int next_tx;          /* next free TD */
 	struct device *device;         /* generic device */
 	struct net_device_stats stats;
+	spinlock_t lock;
 };
 
 #define TX_TIMEOUT (3 * HZ)

2.20.1

From: Finn Thain <[email protected]>

[ Upstream commit e3885f576196ddfc670b3d53e745de96ffcb49ab ]

The driver accesses descriptor memory which is simultaneously accessed by the chip, so the compiler must not be allowed to re-order CPU accesses. sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should have done so too but was overlooked.

---
 drivers/net/ethernet/natsemi/sonic.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

index 1fd61d7f79bcb..a009a99c0e544 100644
@@ -342,30 +342,30 @@ static void sonic_tx_timeout(struct net_device *dev);
    as far as we can tell. */
 /* OpenBSD calls this "SWO".  I'd like to think that sonic_buf_put()
    is a much better name. */
-static inline void sonic_buf_put(void* base, int bitmode,
+static inline void sonic_buf_put(u16 *base, int bitmode,
 				 int offset, __u16 val)
 {
 	if (bitmode)
 #ifdef __BIG_ENDIAN
-		((__u16 *) base + (offset*2))[1] = val;
+		__raw_writew(val, base + (offset * 2) + 1);
 #else
-		((__u16 *) base + (offset*2))[0] = val;
+		__raw_writew(val, base + (offset * 2) + 0);
 #endif
 	else
-	 	((__u16 *) base)[offset] = val;
+		__raw_writew(val, base + (offset * 1) + 0);
 }
 
-static inline __u16 sonic_buf_get(void* base, int bitmode,
+static inline __u16 sonic_buf_get(u16 *base, int bitmode,
 				  int offset)
 {
 	if (bitmode)
 #ifdef __BIG_ENDIAN
-		return ((volatile __u16 *) base + (offset*2))[1];
+		return __raw_readw(base + (offset * 2) + 1);
 #else
-		return ((volatile __u16 *) base + (offset*2))[0];
+		return __raw_readw(base + (offset * 2) + 0);
 #endif
 	else
-		return ((volatile __u16 *) base)[offset];
+		return __raw_readw(base + (offset * 1) + 0);
 }
 
 /* Inlines that you should actually use for reading/writing DMA buffers */

2.20.1

From: Finn Thain <[email protected]>

[ Upstream commit 9e311820f67e740f4fb8dcb82b4c4b5b05bdd1a5 ]

The SONIC can sometimes advance its rx buffer pointer (RRP register) without advancing its rx descriptor pointer (CRDA register). As a result the index of the current rx descriptor may not equal that of the current rx buffer. The driver mistakenly assumes that they are always equal. This assumption leads to incorrect packet lengths and possible packet duplication. Avoid this by calling a new function to locate the buffer corresponding to a given descriptor.

---
 drivers/net/ethernet/natsemi/sonic.c | 35 ++++++++++++++++++++++++----
 drivers/net/ethernet/natsemi/sonic.h |  5 ++--
 2 files changed, 33 insertions(+), 7 deletions(-)

index 0374e834f865e..21766ec12ef20 100644
@@ -423,6 +423,21 @@ static irqreturn_t sonic_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/* Return the array index corresponding to a given Receive Buffer pointer. */
+static int index_from_addr(struct sonic_local *lp, dma_addr_t addr,
+			   unsigned int last)
+{
+	unsigned int i = last;
+
+	do {
+		i = (i + 1) & SONIC_RRS_MASK;
+		if (addr == lp->rx_laddr[i])
+			return i;
+	} while (i != last);
+
+	return -ENOENT;
+}
+
 /*
  * We have a good packet(s), pass it/them up the network stack.
  */

@@ -442,6 +457,16 @@ static void sonic_rx(struct net_device *dev)
 
 		status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
 		if (status & SONIC_RCR_PRX) {
+			u32 addr = (sonic_rda_get(dev, entry,
+						  SONIC_RD_PKTPTR_H) << 16) |
+				   sonic_rda_get(dev, entry, SONIC_RD_PKTPTR_L);
+			int i = index_from_addr(lp, addr, entry);
+
+			if (i < 0) {
+				WARN_ONCE(1, "failed to find buffer!\n");
+				break;
+			}
+
 			/* Malloc up new buffer. */
 			new_skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
 			if (new_skb == NULL) {

@@ -463,7 +488,7 @@ static void sonic_rx(struct net_device *dev)
 
 			/* now we have a new skb to replace it, pass the used one up the stack */
 			dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE);
-			used_skb = lp->rx_skb[entry];
+			used_skb = lp->rx_skb[i];
 			pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN);
 			skb_trim(used_skb, pkt_len);
 			used_skb->protocol = eth_type_trans(used_skb, dev);

@@ -472,13 +497,13 @@ static void sonic_rx(struct net_device *dev)
 			lp->stats.rx_bytes += pkt_len;
 
 			/* and insert the new skb */
-			lp->rx_laddr[entry] = new_laddr;
-			lp->rx_skb[entry] = new_skb;
+			lp->rx_laddr[i] = new_laddr;
+			lp->rx_skb[i] = new_skb;
 
 			bufadr_l = (unsigned long)new_laddr & 0xffff;
 			bufadr_h = (unsigned long)new_laddr >> 16;
-			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l);
-			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h);
+			sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+			sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
 		} else {
 			/* This should only happen, if we enable accepting broken packets. */
 			lp->stats.rx_errors++;

index a009a99c0e544..d9f8ceb5353a4 100644
@@ -273,8 +273,9 @@
 #define SONIC_NUM_RDS   SONIC_NUM_RRS /* number of receive descriptors */
 #define SONIC_NUM_TDS   16            /* number of transmit descriptors */
 
-#define SONIC_RDS_MASK  (SONIC_NUM_RDS-1)
-#define SONIC_TDS_MASK  (SONIC_NUM_TDS-1)
+#define SONIC_RRS_MASK  (SONIC_NUM_RRS - 1)
+#define SONIC_RDS_MASK  (SONIC_NUM_RDS - 1)
+#define SONIC_TDS_MASK  (SONIC_NUM_TDS - 1)
 
 #define SONIC_RBSIZE	1520          /* size of one resource buffer */
 

2.20.1

From: Finn Thain <[email protected]>

[ Upstream commit 3f4b7e6a2be982fd8820a2b54d46dd9c351db899 ]

Make sure the SONIC's DMA engine is idle before altering the transmit and receive descriptors. Add a helper for this as it will be needed again.

---
 drivers/net/ethernet/natsemi/sonic.c | 25 +++++++++++++++++++++++++
 drivers/net/ethernet/natsemi/sonic.h |  3 +++
 2 files changed, 28 insertions(+)

index 21766ec12ef20..712be59251f51 100644
@@ -103,6 +103,24 @@ static int sonic_open(struct net_device *dev)
 	return 0;
 }
 
+/* Wait for the SONIC to become idle. */
+static void sonic_quiesce(struct net_device *dev, u16 mask)
+{
+	struct sonic_local * __maybe_unused lp = netdev_priv(dev);
+	int i;
+	u16 bits;
+
+	for (i = 0; i < 1000; ++i) {
+		bits = SONIC_READ(SONIC_CMD) & mask;
+		if (!bits)
+			return;
+		if (irqs_disabled() || in_interrupt())
+			udelay(20);
+		else
+			usleep_range(100, 200);
+	}
+	WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits);
+}
 
 /*
  * Close the SONIC device

@@ -120,6 +138,9 @@ static int sonic_close(struct net_device *dev)
 	/*
 	 * stop the SONIC, disable interrupts
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);

@@ -159,6 +180,9 @@ static void sonic_tx_timeout(struct net_device *dev)
 	 * put the Sonic into software-reset mode and
 	 * disable all interrupts before releasing DMA buffers
 	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
 	SONIC_WRITE(SONIC_IMR, 0);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);

@@ -638,6 +662,7 @@ static int sonic_init(struct net_device *dev)
 	 */
 	SONIC_WRITE(SONIC_CMD, 0);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
 
 	/*
 	 * initialize the receive resource area

index d9f8ceb5353a4..7dcf913d7395a 100644
@@ -109,6 +109,9 @@
 #define SONIC_CR_TXP            0x0002
 #define SONIC_CR_HTX            0x0001
 
+#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \
+		      SONIC_CR_RXEN | SONIC_CR_TXP)
+
 /*
  * SONIC data configuration bits
  */

2.20.1

From: Vasily Averin <[email protected]>

[ Upstream commit 70a87287c821e9721b62463777f55ba588ac4623 ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

index 129d6095749a4..54d5e53e94af2 100644
@@ -66,8 +66,7 @@ static void *seq_tab_start(struct seq_file *seq, loff_t *pos)
 static void *seq_tab_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	v = seq_tab_get_idx(seq->private, *pos + 1);
-	if (v)
-		++*pos;
+	++(*pos);
 	return v;
 }
 

2.20.1

From: Vasily Averin <[email protected]>

[ Upstream commit 66018a102f7756cf72db4d2704e1b93969d9d332 ]

if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 drivers/net/ethernet/chelsio/cxgb4/l2t.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

index ac27898c6ab0b..e7bdaad6ed0f7 100644
@@ -604,8 +604,7 @@ static void *l2t_seq_start(struct seq_file *seq, loff_t *pos)
 static void *l2t_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	v = l2t_get_idx(seq, *pos);
-	if (v)
-		++*pos;
+	++(*pos);
 	return v;
 }
 

2.20.1

From: Praveen Chaudhary <[email protected]>

[ Upstream commit 189c9b1e94539b11c80636bc13e9cf47529e7bba ]

skb->csum is updated incorrectly, when manipulation for NF_NAT_MANIP_SRC\DST is done on IPV6 packet.

Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(), because update in two fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to update skb->csum, because update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as L4 Header checksum for skb->csum calculation.

---
 net/core/utils.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

index 3d17ca8b47441..13eb3552de078 100644
@@ -316,6 +316,23 @@ void inet_proto_csum_replace4(__sum16 *sum, struct sk_buff *skb,
 }
 EXPORT_SYMBOL(inet_proto_csum_replace4);
 
+/**
+ * inet_proto_csum_replace16 - update layer 4 header checksum field
+ * @sum: Layer 4 header checksum field
+ * @skb: sk_buff for the packet
+ * @from: old IPv6 address
+ * @to: new IPv6 address
+ * @pseudohdr: True if layer 4 header checksum includes pseudoheader
+ *
+ * Update layer 4 header as per the update in IPv6 src/dst address.
+ *
+ * There is no need to update skb->csum in this function, because update in two
+ * fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other
+ * for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to
+ * update skb->csum, because update in 3 fields a.) IPv4 src/dst address,
+ * b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as
+ * L4 Header checksum for skb->csum calculation.
+ */
 void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
 			       const __be32 *from, const __be32 *to,
 			       bool pseudohdr)

@@ -327,9 +344,6 @@ void inet_proto_csum_replace16(__sum16 *sum, struct sk_buff *skb,
 	if (skb->ip_summed != CHECKSUM_PARTIAL) {
 		*sum = csum_fold(csum_partial(diff, sizeof(diff),
 				 ~csum_unfold(*sum)));
-		if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
-			skb->csum = ~csum_partial(diff, sizeof(diff),
-						  ~skb->csum);
 	} else if (pseudohdr)
 		*sum = ~csum_fold(csum_partial(diff, sizeof(diff),
 				  csum_unfold(*sum)));

2.20.1

All tests are passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    19 tests:	19 pass, 0 fail

Linux version: 4.4.213-rc1-g0d16ce6b7f9f
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Cheers
Jon

nvpublic

Hi Greg,

We're seeing an issue with 4.4.213-rc1 (36670370c48b) and 4.4.213-rc2 (758a39807529) with our 4 am335x configurations [0]:

AS arch/arm/kernel/hyp-stub.o
arch/arm/kernel/hyp-stub.S: CC arch/arm/mach-omap2/sram.o
Assembler messages:
AS arch/arm/kernel/smccc-call.o
arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode scripts/Makefile.build:375: recipe for target 'arch/arm/kernel/hyp-stub.o' failed make[1]: *** [arch/arm/kernel/hyp-stub.o] Error 1

The culprit seems to be: 15163bcee7b5 ("ARM: 8955/1: virt: Relax arch timer version check during early boot") Reverting the same resolves the build issue.

Latest pipeline: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657

[0] https://gitlab.com/cip-project/cip-kernel/cip-kernel-config/-/blob/master/4.4.y-cip/arm/
siemens_am335x-axm2_defconfig, siemens_am335x-draco_defconfig, siemens_am335x-dxr2_defconfig, siemens_am335x-etamin_defconfig

Kind regards, Chris

Hi!

For the record, build results are here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683657

4.19.102 builds okay:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/114683672

but that's probably because siemens_am335x* configurations are not tested in 4.19.X case.

Best regards,
Pavel

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20200204/9be50b0a/attachment.sig>

Thanks, I'll go drop that patch from 4.4 and 4.9 trees.

greg k-h

I believe it is more likely than not to break 4.19 (and possibly mainline), too, but I have not yet done required testing.

Best regards,
Pavel

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20200205/bae3be3c/attachment.sig>

arm:{allmodconfig, omap2plus_defconfig, imx_v6_v7_defconfig}"

arch/arm/kernel/hyp-stub.S: Assembler messages:
arch/arm/kernel/hyp-stub.S:147: Error: selected processor does not support `ubfx r7,r7,#16,#4' in ARM mode

Guenter

Thanks, have now dropped the offending patch.

greg k-h

Build results:

	total: 170 pass: 167 fail: 3
Failed builds:
	arm:allmodconfig
	arm:omap2plus_defconfig
	arm:imx_v6_v7_defconfig
Qemu test results:
	total: 325 pass: 322 fail: 3
Failed tests:
	arm:kzm:imx_v6_v7_defconfig:nodrm:mem128:initrd
	arm:mcimx6ul-evk:imx_v6_v7_defconfig:nodrm:mem256:imx6ul-14x14-evk:initrd
	arm:mcimx6ul-evk:imx_v6_v7_defconfig:nodrm:sd:mem256:imx6ul-14x14-evk:rootfs

Errors as already reported.

Guenter

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.213-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 758a39807529795c804023beb3dd12d9494760cf
git describe: v4.4.212-56-g758a39807529
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.212-56-g758a39807529

No regressions (compared to build v4.4.212)

No fixes (compared to build v4.4.212)

Ran 4894 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* kselftest
* kvm-unit-tests
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

Summary
------------------------------------------------------------------------

kernel: 4.4.208-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.208-rc1-hikey-20200101-645
git commit: 45aaddb4efb9c8a83ada6caeb9594f7fc5130ec3
git describe: 4.4.208-rc1-hikey-20200101-645
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.208-rc1-hikey-20200101-645

No regressions (compared to build 4.4.208-rc1-hikey-20200101-644)

No fixes (compared to build 4.4.208-rc1-hikey-20200101-644)

Ran 1568 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

Linaro LKFT
https://lkft.linaro.org