Introduce Control-flow Enforcement opcodes
Subsystems (2)
cover Introduce Control-flow Enforcement opcodes
Control-flow Enforcement (CET) introduces 10 new instructions [1]. Add them to the opcode map. This series has been separated from the CET patches [2] for ease of review.
[1] Detailed information on CET can be found in "Intel 64 and IA-32
Architectures Software Developer's Manual":
https://software.intel.com/en-us/download/intel-64-and-ia-32-
architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4[2] CET patches:
https://lkml.kernel.org/r/[email protected]/ https://lkml.kernel.org/r/[email protected]/
Adrian Hunter (1):
x86/insn: perf tools: Add CET instructions to the new instructions
test
Yu-cheng Yu (1):
x86/insn: Add Control-flow Enforcement (CET) instructions to the
opcode map
arch/x86/lib/x86-opcode-map.txt | 17 +- tools/arch/x86/lib/x86-opcode-map.txt | 17 +- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++ tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++ tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 +++++++++++++++++++ 5 files changed, 566 insertions(+), 12 deletions(-)
Signature · 1 line
2.21.0
PATCH 1/2 x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
Add the following CET instructions to the opcode map.
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software Developer's Manual.
--- arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ tools/arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ 2 files changed, 22 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
Signature · 1 line
2.21.0
[tip: x86/misc] x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
The following commit has been merged into the x86/misc branch of tip:
The following commit has been merged into the x86/misc branch of tip:
Commit-ID: 5790921bc18b1eb5c0c61371e31114fd4c4b0154 Gitweb: https://git.kernel.org/tip/5790921bc18b1eb5c0c61371e31114fd4c4b0154 Author: Yu-cheng Yu <[email protected]> AuthorDate: Tue, 04 Feb 2020 09:14:24 -08:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Thu, 26 Mar 2020 12:21:40 +01:00
x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software Developer's Manual.
--- arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ tools/arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ 2 files changed, 22 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
[tip: perf/urgent] x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
In reply to Yu-cheng YuThe following commit has been merged into the perf/urgent branch of tip:
The following commit has been merged into the perf/urgent branch of tip:
Commit-ID: 315a4af8cd2469fcf5dacc58b5e73944b4f0c561 Gitweb: https://git.kernel.org/tip/315a4af8cd2469fcf5dacc58b5e73944b4f0c561 Author: Yu-cheng Yu <[email protected]> AuthorDate: Tue, 04 Feb 2020 09:14:24 -08:00 Committer: Arnaldo Carvalho de Melo <[email protected]> CommitterDate: Fri, 27 Mar 2020 10:38:46 -03:00
x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the token busy, and set then Shadow Stack pointer(SSP) to the value of MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software Developer's Manual.
--- arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ tools/arch/x86/lib/x86-opcode-map.txt | 17 +++++++++++------ 2 files changed, 22 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +11 -6
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: Grp21 (1A) 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -803,8 +803,8 @@ f0: MOVBE Gy,My | MOVBE Gw,Mw (66) | CRC32 Gd,Eb (F2) | CRC32 Gd,Eb (66&F2) f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) -f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) | WRUSSD/Q My,Gy (66) +f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) | WRSSD/Q My,Gy f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
@@ -970,7 +970,7 @@ GrpTable: Grp7 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B) 3: LIDT Ms 4: SMSW Mw/Rv -5: rdpkru (110),(11B) | wrpkru (111),(11B) +5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) 6: LMSW Ew 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B) EndTable
@@ -1041,8 +1041,8 @@ GrpTable: Grp15 2: vldmxcsr Md (v1) | WRFSBASE Ry (F3),(11B) 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B) 4: XSAVE | ptwrite Ey (F3),(11B) -5: XRSTOR | lfence (11B) -6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) +5: XRSTOR | lfence (11B) | INCSSPD/Q Ry (F3),(11B) +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B) | CLRSSBSY Mq (F3) 7: clflush | clflushopt (66) | sfence (11B) EndTable
@@ -1077,6 +1077,11 @@ GrpTable: Grp20 0: cldemote Mb EndTable +GrpTable: Grp21 +1: RDSSPD/Q Ry (F3),(11B) +7: ENDBR64 (F3),(010),(11B) | ENDBR32 (F3),(011),(11B) +EndTable + # AMD's Prefetch Group GrpTable: GrpP 0: PREFETCH
PATCH 2/2 x86/insn: perf tools: Add CET instructions to the new instructions test
In reply to Yu-cheng YuFrom: Adrian Hunter <[email protected]>
Add to the "x86 instruction decoder - new instructions" test the following instructions:
incsspd incsspq rdsspd rdsspq saveprevssp rstorssp wrssd wrssq wrussd wrussq setssbsy clrssbsy endbr32 endbr64
And the notrack prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow Enforcement Technology Specification May 2019 (334525-003).
--- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++ tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++ tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 +++++++++++++++++++ 3 files changed, 544 insertions(+)
tools/perf/arch/x86/tests/insn-x86-dat-32.c +112 -0
@@ -2085,6 +2085,118 @@ "67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",}, {{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", "67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",}, +{{0xf3, 0x0f, 0xae, 0xe8, }, 4, 0, "", "", +"f3 0f ae e8 \tincsspd %eax",}, +{{0x0f, 0xae, 0x28, }, 3, 0, "", "", +"0f ae 28 \txrstor (%eax)",}, +{{0x0f, 0xae, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", +"0f ae 2d 78 56 34 12 \txrstor 0x12345678",}, +{{0x0f, 0xae, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f ae ac c8 78 56 34 12 \txrstor 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0xae, 0xe8, }, 3, 0, "", "", +"0f ae e8 \tlfence ",}, +{{0xf3, 0x0f, 0x1e, 0xc8, }, 4, 0, "", "", +"f3 0f 1e c8 \trdsspd %eax",}, +{{0xf3, 0x0f, 0x01, 0xea, }, 4, 0, "", "", +"f3 0f 01 ea \tsaveprevssp ",}, +{{0xf3, 0x0f, 0x01, 0x28, }, 4, 0, "", "", +"f3 0f 01 28 \trstorssp (%eax)",}, +{{0xf3, 0x0f, 0x01, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f 01 2d 78 56 34 12 \trstorssp 0x12345678",}, +{{0xf3, 0x0f, 0x01, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 01 ac c8 78 56 34 12 \trstorssp 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0x38, 0xf6, 0x08, }, 4, 0, "", "", +"0f 38 f6 08 \twrssd %ecx,(%eax)",}, +{{0x0f, 0x38, 0xf6, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 38 f6 15 78 56 34 12 \twrssd %edx,0x12345678",}, +{{0x0f, 0x38, 0xf6, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"0f 38 f6 94 c8 78 56 34 12 \twrssd %edx,0x12345678(%eax,%ecx,8)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x08, }, 5, 0, "", "", +"66 0f 38 f5 08 \twrussd %ecx,(%eax)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x15, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f5 15 78 56 34 12 \twrussd %edx,0x12345678",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"66 0f 38 f5 94 c8 78 56 34 12 \twrussd %edx,0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x01, 0xe8, }, 4, 0, "", "", +"f3 0f 01 e8 \tsetssbsy ",}, +{{0x0f, 0x01, 0xee, }, 3, 0, "", "", +"0f 01 ee \trdpkru ",}, +{{0x0f, 0x01, 0xef, }, 3, 0, "", "", +"0f 01 ef \twrpkru ",}, +{{0xf3, 0x0f, 0xae, 0x30, }, 4, 0, "", "", +"f3 0f ae 30 \tclrssbsy (%eax)",}, +{{0xf3, 0x0f, 0xae, 0x35, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f ae 35 78 56 34 12 \tclrssbsy 0x12345678",}, +{{0xf3, 0x0f, 0xae, 0xb4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f ae b4 c8 78 56 34 12 \tclrssbsy 0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x1e, 0xfb, }, 4, 0, "", "", +"f3 0f 1e fb \tendbr32 ",}, +{{0xf3, 0x0f, 0x1e, 0xfa, }, 4, 0, "", "", +"f3 0f 1e fa \tendbr64 ",}, +{{0xff, 0xd0, }, 2, 0, "call", "indirect", +"ff d0 \tcall *%eax",}, +{{0xff, 0x10, }, 2, 0, "call", "indirect", +"ff 10 \tcall *(%eax)",}, +{{0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "call", "indirect", +"ff 15 78 56 34 12 \tcall *0x12345678",}, +{{0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"ff 94 c8 78 56 34 12 \tcall *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"f2 ff d0 \tbnd call *%eax",}, +{{0xf2, 0xff, 0x10, }, 3, 0, "call", "indirect", +"f2 ff 10 \tbnd call *(%eax)",}, +{{0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"f2 ff 15 78 56 34 12 \tbnd call *0x12345678",}, +{{0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"f2 ff 94 c8 78 56 34 12 \tbnd call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"3e ff d0 \tnotrack call *%eax",}, +{{0x3e, 0xff, 0x10, }, 3, 0, "call", "indirect", +"3e ff 10 \tnotrack call *(%eax)",}, +{{0x3e, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"3e ff 15 78 56 34 12 \tnotrack call *0x12345678",}, +{{0x3e, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e ff 94 c8 78 56 34 12 \tnotrack call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xd0, }, 4, 0, "call", "indirect", +"3e f2 ff d0 \tnotrack bnd call *%eax",}, +{{0x3e, 0xf2, 0xff, 0x10, }, 4, 0, "call", "indirect", +"3e f2 ff 10 \tnotrack bnd call *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e f2 ff 15 78 56 34 12 \tnotrack bnd call *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "call", "indirect", +"3e f2 ff 94 c8 78 56 34 12 \tnotrack bnd call *0x12345678(%eax,%ecx,8)",}, +{{0xff, 0xe0, }, 2, 0, "jmp", "indirect", +"ff e0 \tjmp *%eax",}, +{{0xff, 0x20, }, 2, 0, "jmp", "indirect", +"ff 20 \tjmp *(%eax)",}, +{{0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "jmp", "indirect", +"ff 25 78 56 34 12 \tjmp *0x12345678",}, +{{0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"ff a4 c8 78 56 34 12 \tjmp *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"f2 ff e0 \tbnd jmp *%eax",}, +{{0xf2, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"f2 ff 20 \tbnd jmp *(%eax)",}, +{{0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"f2 ff 25 78 56 34 12 \tbnd jmp *0x12345678",}, +{{0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"f2 ff a4 c8 78 56 34 12 \tbnd jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"3e ff e0 \tnotrack jmp *%eax",}, +{{0x3e, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"3e ff 20 \tnotrack jmp *(%eax)",}, +{{0x3e, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"3e ff 25 78 56 34 12 \tnotrack jmp *0x12345678",}, +{{0x3e, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e ff a4 c8 78 56 34 12 \tnotrack jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xe0, }, 4, 0, "jmp", "indirect", +"3e f2 ff e0 \tnotrack bnd jmp *%eax",}, +{{0x3e, 0xf2, 0xff, 0x20, }, 4, 0, "jmp", "indirect", +"3e f2 ff 20 \tnotrack bnd jmp *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e f2 ff 25 78 56 34 12 \tnotrack bnd jmp *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "jmp", "indirect", +"3e f2 ff a4 c8 78 56 34 12 \tnotrack bnd jmp *0x12345678(%eax,%ecx,8)",}, {{0x0f, 0x01, 0xcf, }, 3, 0, "", "", "0f 01 cf \tencls ",}, {{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
tools/perf/arch/x86/tests/insn-x86-dat-64.c +196 -0
202 lines not on this page · raw message
tools/perf/arch/x86/tests/insn-x86-dat-src.c +236 -0
248 lines not on this page · raw message
Signature · 1 line
2.21.0
[tip: x86/misc] perf/tests: Add CET instructions to the new instructions test
The following commit has been merged into the x86/misc branch of tip:
The following commit has been merged into the x86/misc branch of tip:
Commit-ID: 1032f32645f8a650edb0134d52fa085642d0a492 Gitweb: https://git.kernel.org/tip/1032f32645f8a650edb0134d52fa085642d0a492 Author: Adrian Hunter <[email protected]> AuthorDate: Tue, 04 Feb 2020 09:14:25 -08:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Thu, 26 Mar 2020 12:31:36 +01:00
perf/tests: Add CET instructions to the new instructions test
Add to the "x86 instruction decoder - new instructions" test the following instructions:
incsspd
incsspq
rdsspd
rdsspq
saveprevssp
rstorssp
wrssd
wrssq
wrussd
wrussq
setssbsy
clrssbsy
endbr32
endbr64
And the notrack prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow Enforcement Technology Specification May 2019 (334525-003).
--- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++- tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++- tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 ++++++++++++++++++- 3 files changed, 544 insertions(+)
tools/perf/arch/x86/tests/insn-x86-dat-32.c +112 -0
@@ -2085,6 +2085,118 @@ "67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",}, {{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", "67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",}, +{{0xf3, 0x0f, 0xae, 0xe8, }, 4, 0, "", "", +"f3 0f ae e8 \tincsspd %eax",}, +{{0x0f, 0xae, 0x28, }, 3, 0, "", "", +"0f ae 28 \txrstor (%eax)",}, +{{0x0f, 0xae, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", +"0f ae 2d 78 56 34 12 \txrstor 0x12345678",}, +{{0x0f, 0xae, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f ae ac c8 78 56 34 12 \txrstor 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0xae, 0xe8, }, 3, 0, "", "", +"0f ae e8 \tlfence ",}, +{{0xf3, 0x0f, 0x1e, 0xc8, }, 4, 0, "", "", +"f3 0f 1e c8 \trdsspd %eax",}, +{{0xf3, 0x0f, 0x01, 0xea, }, 4, 0, "", "", +"f3 0f 01 ea \tsaveprevssp ",}, +{{0xf3, 0x0f, 0x01, 0x28, }, 4, 0, "", "", +"f3 0f 01 28 \trstorssp (%eax)",}, +{{0xf3, 0x0f, 0x01, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f 01 2d 78 56 34 12 \trstorssp 0x12345678",}, +{{0xf3, 0x0f, 0x01, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 01 ac c8 78 56 34 12 \trstorssp 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0x38, 0xf6, 0x08, }, 4, 0, "", "", +"0f 38 f6 08 \twrssd %ecx,(%eax)",}, +{{0x0f, 0x38, 0xf6, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 38 f6 15 78 56 34 12 \twrssd %edx,0x12345678",}, +{{0x0f, 0x38, 0xf6, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"0f 38 f6 94 c8 78 56 34 12 \twrssd %edx,0x12345678(%eax,%ecx,8)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x08, }, 5, 0, "", "", +"66 0f 38 f5 08 \twrussd %ecx,(%eax)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x15, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f5 15 78 56 34 12 \twrussd %edx,0x12345678",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"66 0f 38 f5 94 c8 78 56 34 12 \twrussd %edx,0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x01, 0xe8, }, 4, 0, "", "", +"f3 0f 01 e8 \tsetssbsy ",}, +{{0x0f, 0x01, 0xee, }, 3, 0, "", "", +"0f 01 ee \trdpkru ",}, +{{0x0f, 0x01, 0xef, }, 3, 0, "", "", +"0f 01 ef \twrpkru ",}, +{{0xf3, 0x0f, 0xae, 0x30, }, 4, 0, "", "", +"f3 0f ae 30 \tclrssbsy (%eax)",}, +{{0xf3, 0x0f, 0xae, 0x35, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f ae 35 78 56 34 12 \tclrssbsy 0x12345678",}, +{{0xf3, 0x0f, 0xae, 0xb4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f ae b4 c8 78 56 34 12 \tclrssbsy 0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x1e, 0xfb, }, 4, 0, "", "", +"f3 0f 1e fb \tendbr32 ",}, +{{0xf3, 0x0f, 0x1e, 0xfa, }, 4, 0, "", "", +"f3 0f 1e fa \tendbr64 ",}, +{{0xff, 0xd0, }, 2, 0, "call", "indirect", +"ff d0 \tcall *%eax",}, +{{0xff, 0x10, }, 2, 0, "call", "indirect", +"ff 10 \tcall *(%eax)",}, +{{0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "call", "indirect", +"ff 15 78 56 34 12 \tcall *0x12345678",}, +{{0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"ff 94 c8 78 56 34 12 \tcall *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"f2 ff d0 \tbnd call *%eax",}, +{{0xf2, 0xff, 0x10, }, 3, 0, "call", "indirect", +"f2 ff 10 \tbnd call *(%eax)",}, +{{0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"f2 ff 15 78 56 34 12 \tbnd call *0x12345678",}, +{{0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"f2 ff 94 c8 78 56 34 12 \tbnd call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"3e ff d0 \tnotrack call *%eax",}, +{{0x3e, 0xff, 0x10, }, 3, 0, "call", "indirect", +"3e ff 10 \tnotrack call *(%eax)",}, +{{0x3e, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"3e ff 15 78 56 34 12 \tnotrack call *0x12345678",}, +{{0x3e, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e ff 94 c8 78 56 34 12 \tnotrack call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xd0, }, 4, 0, "call", "indirect", +"3e f2 ff d0 \tnotrack bnd call *%eax",}, +{{0x3e, 0xf2, 0xff, 0x10, }, 4, 0, "call", "indirect", +"3e f2 ff 10 \tnotrack bnd call *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e f2 ff 15 78 56 34 12 \tnotrack bnd call *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "call", "indirect", +"3e f2 ff 94 c8 78 56 34 12 \tnotrack bnd call *0x12345678(%eax,%ecx,8)",}, +{{0xff, 0xe0, }, 2, 0, "jmp", "indirect", +"ff e0 \tjmp *%eax",}, +{{0xff, 0x20, }, 2, 0, "jmp", "indirect", +"ff 20 \tjmp *(%eax)",}, +{{0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "jmp", "indirect", +"ff 25 78 56 34 12 \tjmp *0x12345678",}, +{{0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"ff a4 c8 78 56 34 12 \tjmp *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"f2 ff e0 \tbnd jmp *%eax",}, +{{0xf2, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"f2 ff 20 \tbnd jmp *(%eax)",}, +{{0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"f2 ff 25 78 56 34 12 \tbnd jmp *0x12345678",}, +{{0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"f2 ff a4 c8 78 56 34 12 \tbnd jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"3e ff e0 \tnotrack jmp *%eax",}, +{{0x3e, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"3e ff 20 \tnotrack jmp *(%eax)",}, +{{0x3e, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"3e ff 25 78 56 34 12 \tnotrack jmp *0x12345678",}, +{{0x3e, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e ff a4 c8 78 56 34 12 \tnotrack jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xe0, }, 4, 0, "jmp", "indirect", +"3e f2 ff e0 \tnotrack bnd jmp *%eax",}, +{{0x3e, 0xf2, 0xff, 0x20, }, 4, 0, "jmp", "indirect", +"3e f2 ff 20 \tnotrack bnd jmp *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e f2 ff 25 78 56 34 12 \tnotrack bnd jmp *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "jmp", "indirect", +"3e f2 ff a4 c8 78 56 34 12 \tnotrack bnd jmp *0x12345678(%eax,%ecx,8)",}, {{0x0f, 0x01, 0xcf, }, 3, 0, "", "", "0f 01 cf \tencls ",}, {{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
tools/perf/arch/x86/tests/insn-x86-dat-64.c +196 -0
202 lines not on this page · raw message
tools/perf/arch/x86/tests/insn-x86-dat-src.c +236 -0
248 lines not on this page · raw message
[tip: perf/urgent] perf test x86: Add CET instructions to the new instructions test
In reply to Yu-cheng YuThe following commit has been merged into the perf/urgent branch of tip:
The following commit has been merged into the perf/urgent branch of tip:
Commit-ID: 26cec7480e7edaa9dead4912055078b98c1d192e Gitweb: https://git.kernel.org/tip/26cec7480e7edaa9dead4912055078b98c1d192e Author: Adrian Hunter <[email protected]> AuthorDate: Tue, 04 Feb 2020 09:14:25 -08:00 Committer: Arnaldo Carvalho de Melo <[email protected]> CommitterDate: Fri, 27 Mar 2020 10:38:47 -03:00
perf test x86: Add CET instructions to the new instructions test
Add to the "x86 instruction decoder - new instructions" test the following instructions:
incsspd incsspq rdsspd rdsspq saveprevssp rstorssp wrssd wrssq wrussd wrussq setssbsy clrssbsy endbr32 endbr64
And the "notrack" prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow Enforcement Technology Specification May 2019 (334525-003).
Committer testing:
$ perf test instr 67: x86 instruction decoder - new instructions : Ok $
Then use verbose mode and check one of those new instructions:
$ perf test -v instr |& grep saveprevssp Decoded ok: f3 0f 01 ea saveprevssp Decoded ok: f3 0f 01 ea saveprevssp $
--- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++- tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++- tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 ++++++++++++++++++- 3 files changed, 544 insertions(+)
tools/perf/arch/x86/tests/insn-x86-dat-32.c +112 -0
@@ -2085,6 +2085,118 @@ "67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",}, {{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "", "67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",}, +{{0xf3, 0x0f, 0xae, 0xe8, }, 4, 0, "", "", +"f3 0f ae e8 \tincsspd %eax",}, +{{0x0f, 0xae, 0x28, }, 3, 0, "", "", +"0f ae 28 \txrstor (%eax)",}, +{{0x0f, 0xae, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "", +"0f ae 2d 78 56 34 12 \txrstor 0x12345678",}, +{{0x0f, 0xae, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f ae ac c8 78 56 34 12 \txrstor 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0xae, 0xe8, }, 3, 0, "", "", +"0f ae e8 \tlfence ",}, +{{0xf3, 0x0f, 0x1e, 0xc8, }, 4, 0, "", "", +"f3 0f 1e c8 \trdsspd %eax",}, +{{0xf3, 0x0f, 0x01, 0xea, }, 4, 0, "", "", +"f3 0f 01 ea \tsaveprevssp ",}, +{{0xf3, 0x0f, 0x01, 0x28, }, 4, 0, "", "", +"f3 0f 01 28 \trstorssp (%eax)",}, +{{0xf3, 0x0f, 0x01, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f 01 2d 78 56 34 12 \trstorssp 0x12345678",}, +{{0xf3, 0x0f, 0x01, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f 01 ac c8 78 56 34 12 \trstorssp 0x12345678(%eax,%ecx,8)",}, +{{0x0f, 0x38, 0xf6, 0x08, }, 4, 0, "", "", +"0f 38 f6 08 \twrssd %ecx,(%eax)",}, +{{0x0f, 0x38, 0xf6, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"0f 38 f6 15 78 56 34 12 \twrssd %edx,0x12345678",}, +{{0x0f, 0x38, 0xf6, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"0f 38 f6 94 c8 78 56 34 12 \twrssd %edx,0x12345678(%eax,%ecx,8)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x08, }, 5, 0, "", "", +"66 0f 38 f5 08 \twrussd %ecx,(%eax)",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x15, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"66 0f 38 f5 15 78 56 34 12 \twrussd %edx,0x12345678",}, +{{0x66, 0x0f, 0x38, 0xf5, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "", +"66 0f 38 f5 94 c8 78 56 34 12 \twrussd %edx,0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x01, 0xe8, }, 4, 0, "", "", +"f3 0f 01 e8 \tsetssbsy ",}, +{{0x0f, 0x01, 0xee, }, 3, 0, "", "", +"0f 01 ee \trdpkru ",}, +{{0x0f, 0x01, 0xef, }, 3, 0, "", "", +"0f 01 ef \twrpkru ",}, +{{0xf3, 0x0f, 0xae, 0x30, }, 4, 0, "", "", +"f3 0f ae 30 \tclrssbsy (%eax)",}, +{{0xf3, 0x0f, 0xae, 0x35, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "", +"f3 0f ae 35 78 56 34 12 \tclrssbsy 0x12345678",}, +{{0xf3, 0x0f, 0xae, 0xb4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "", +"f3 0f ae b4 c8 78 56 34 12 \tclrssbsy 0x12345678(%eax,%ecx,8)",}, +{{0xf3, 0x0f, 0x1e, 0xfb, }, 4, 0, "", "", +"f3 0f 1e fb \tendbr32 ",}, +{{0xf3, 0x0f, 0x1e, 0xfa, }, 4, 0, "", "", +"f3 0f 1e fa \tendbr64 ",}, +{{0xff, 0xd0, }, 2, 0, "call", "indirect", +"ff d0 \tcall *%eax",}, +{{0xff, 0x10, }, 2, 0, "call", "indirect", +"ff 10 \tcall *(%eax)",}, +{{0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "call", "indirect", +"ff 15 78 56 34 12 \tcall *0x12345678",}, +{{0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"ff 94 c8 78 56 34 12 \tcall *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"f2 ff d0 \tbnd call *%eax",}, +{{0xf2, 0xff, 0x10, }, 3, 0, "call", "indirect", +"f2 ff 10 \tbnd call *(%eax)",}, +{{0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"f2 ff 15 78 56 34 12 \tbnd call *0x12345678",}, +{{0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"f2 ff 94 c8 78 56 34 12 \tbnd call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xd0, }, 3, 0, "call", "indirect", +"3e ff d0 \tnotrack call *%eax",}, +{{0x3e, 0xff, 0x10, }, 3, 0, "call", "indirect", +"3e ff 10 \tnotrack call *(%eax)",}, +{{0x3e, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "call", "indirect", +"3e ff 15 78 56 34 12 \tnotrack call *0x12345678",}, +{{0x3e, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e ff 94 c8 78 56 34 12 \tnotrack call *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xd0, }, 4, 0, "call", "indirect", +"3e f2 ff d0 \tnotrack bnd call *%eax",}, +{{0x3e, 0xf2, 0xff, 0x10, }, 4, 0, "call", "indirect", +"3e f2 ff 10 \tnotrack bnd call *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x15, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "call", "indirect", +"3e f2 ff 15 78 56 34 12 \tnotrack bnd call *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0x94, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "call", "indirect", +"3e f2 ff 94 c8 78 56 34 12 \tnotrack bnd call *0x12345678(%eax,%ecx,8)",}, +{{0xff, 0xe0, }, 2, 0, "jmp", "indirect", +"ff e0 \tjmp *%eax",}, +{{0xff, 0x20, }, 2, 0, "jmp", "indirect", +"ff 20 \tjmp *(%eax)",}, +{{0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 6, 0, "jmp", "indirect", +"ff 25 78 56 34 12 \tjmp *0x12345678",}, +{{0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"ff a4 c8 78 56 34 12 \tjmp *0x12345678(%eax,%ecx,8)",}, +{{0xf2, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"f2 ff e0 \tbnd jmp *%eax",}, +{{0xf2, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"f2 ff 20 \tbnd jmp *(%eax)",}, +{{0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"f2 ff 25 78 56 34 12 \tbnd jmp *0x12345678",}, +{{0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"f2 ff a4 c8 78 56 34 12 \tbnd jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xff, 0xe0, }, 3, 0, "jmp", "indirect", +"3e ff e0 \tnotrack jmp *%eax",}, +{{0x3e, 0xff, 0x20, }, 3, 0, "jmp", "indirect", +"3e ff 20 \tnotrack jmp *(%eax)",}, +{{0x3e, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "jmp", "indirect", +"3e ff 25 78 56 34 12 \tnotrack jmp *0x12345678",}, +{{0x3e, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e ff a4 c8 78 56 34 12 \tnotrack jmp *0x12345678(%eax,%ecx,8)",}, +{{0x3e, 0xf2, 0xff, 0xe0, }, 4, 0, "jmp", "indirect", +"3e f2 ff e0 \tnotrack bnd jmp *%eax",}, +{{0x3e, 0xf2, 0xff, 0x20, }, 4, 0, "jmp", "indirect", +"3e f2 ff 20 \tnotrack bnd jmp *(%eax)",}, +{{0x3e, 0xf2, 0xff, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "jmp", "indirect", +"3e f2 ff 25 78 56 34 12 \tnotrack bnd jmp *0x12345678",}, +{{0x3e, 0xf2, 0xff, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "jmp", "indirect", +"3e f2 ff a4 c8 78 56 34 12 \tnotrack bnd jmp *0x12345678(%eax,%ecx,8)",}, {{0x0f, 0x01, 0xcf, }, 3, 0, "", "", "0f 01 cf \tencls ",}, {{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
tools/perf/arch/x86/tests/insn-x86-dat-64.c +196 -0
202 lines not on this page · raw message
tools/perf/arch/x86/tests/insn-x86-dat-src.c +236 -0
248 lines not on this page · raw message
Hi,
Quoted 10 lines · On Tue, 4 Feb 2020 09:14:23 -0800 Yu-cheng Yu <[email protected]> wrote:
Control-flow Enforcement (CET) introduces 10 new instructions [1]. Add them to the opcode map. This series has been separated from the CET patches [2] for ease of review.
[1] Detailed information on CET can be found in "Intel 64 and IA-32
Architectures Software Developer's Manual": https://software.intel.com/en-us/download/intel-64-and-ia-32- architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4
Quoted 4 lines
[2] CET patches:
https://lkml.kernel.org/r/[email protected]/ https://lkml.kernel.org/r/[email protected]/
Sorry, somewhat I've missed this series...
This looks good to me.
for this series.
Thank you,
Quoted 19 lines
Adrian Hunter (1):
x86/insn: perf tools: Add CET instructions to the new instructions
testYu-cheng Yu (1):
x86/insn: Add Control-flow Enforcement (CET) instructions to the
opcode maparch/x86/lib/x86-opcode-map.txt | 17 +- tools/arch/x86/lib/x86-opcode-map.txt | 17 +- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++ tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++ tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 +++++++++++++++++++ 5 files changed, 566 insertions(+), 12 deletions(-)Signature · 1 line
2.21.0
Signature · 1 line
Masami Hiramatsu <[email protected]>
Adrian Hunter
reviewerQuoted 22 lines · Masami Hiramatsu
Hi,
Quoted 10 lines · On Tue, 4 Feb 2020 09:14:23 -0800 Yu-cheng Yu <[email protected]> wrote:
Control-flow Enforcement (CET) introduces 10 new instructions [1]. Add them to the opcode map. This series has been separated from the CET patches [2] for ease of review.
[1] Detailed information on CET can be found in "Intel 64 and IA-32
Architectures Software Developer's Manual": https://software.intel.com/en-us/download/intel-64-and-ia-32- architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4Quoted 4 lines
[2] CET patches:
https://lkml.kernel.org/r/[email protected]/ https://lkml.kernel.org/r/[email protected]/Sorry, somewhat I've missed this series...
Quoted 7 lines
This looks good to me.
Acked-by Masami Hiramatsu <[email protected]>for this series.
Thank you,
These are the correct patches for CET instructions.
Sorry for the confusion.
Arnaldo Carvalho de Melo
AppliedEm Thu, Mar 26, 2020 at 07:11:18AM +0200, Adrian Hunter escreveu:
Quoted 23 lines · Masami Hiramatsu
Quoted 21 lines
Quoted 10 lines · On Tue, 4 Feb 2020 09:14:23 -0800 Yu-cheng Yu <[email protected]> wrote:
Control-flow Enforcement (CET) introduces 10 new instructions [1]. Add them to the opcode map. This series has been separated from the CET patches [2] for ease of review.
[1] Detailed information on CET can be found in "Intel 64 and IA-32
Architectures Software Developer's Manual": https://software.intel.com/en-us/download/intel-64-and-ia-32- architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4Quoted 4 lines
[2] CET patches:
https://lkml.kernel.org/r/[email protected]/ https://lkml.kernel.org/r/[email protected]/Sorry, somewhat I've missed this series...
This looks good to me.
Quoted 7 lines
Quoted 3 lines
Acked-by Masami Hiramatsu <[email protected]>for this series.
These are the correct patches for CET instructions.
Sorry for the confusion.
Thanks, applied, sorry for the long delay in doing so.
- Arnaldo