clocksource: Add driver for the Ingenic JZ47xx OST
PATCH v5 1/1 clocksource: Add driver for the Ingenic JZ47xx OST
From: Maarten ter Huurne <[email protected]>
OST is the OS Timer, a 64-bit timer/counter with buffered reading.
SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST.
This driver will register both a clocksource and a sched_clock to the system.
---
Notes:
v2: local_irq_save/restore were moved within sched_clock_register
v3: Only register as 32-bit clocksource to simplify things
v4: - Bypass regmap to read counters.
- Use sched_clock_register_new() to avoid having a global pointer to the ingenic_ost.
- Don't print error codes in probe, since they will be printed anyway if the probe function fails.
- Rebased on 5.6-rc1.
v5: Restored global pointer to the ingenic_ost
drivers/clocksource/Kconfig | 8 ++ drivers/clocksource/Makefile | 1 + drivers/clocksource/ingenic-ost.c | 189 ++++++++++++++++++++++++++++++ 3 files changed, 198 insertions(+) create mode 100644 drivers/clocksource/ingenic-ost.c
drivers/clocksource/Kconfig +8 -0
@@ -697,6 +697,14 @@ config INGENIC_TIMER help Support for the timer/counter unit of the Ingenic JZ SoCs. +config INGENIC_OST + bool "Clocksource for Ingenic OS Timer" + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + help + Support for the Operating System Timer of the Ingenic JZ SoCs. + config MICROCHIP_PIT64B bool "Microchip PIT64B support" depends on OF || COMPILE_TEST
drivers/clocksource/Makefile +1 -0
@@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o obj-$(CONFIG_H8300_TPU) += h8300_tpu.o +obj-$(CONFIG_INGENIC_OST) += ingenic-ost.o obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o
drivers/clocksource/ingenic-ost.c new file +189 -0
189 lines not on this page · raw message
Signature · 1 line
2.25.0
Daniel Lezcano
AppliedQuoted 7 lines · Paul Cercueil
From: Maarten ter Huurne <[email protected]>
OST is the OS Timer, a 64-bit timer/counter with buffered reading.
SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST.
Quoted 8 lines
This driver will register both a clocksource and a
sched_clockto the system.Signed-off-by Maarten ter Huurne <[email protected]>Signed-off-by Paul Cercueil <[email protected]>Tested-by Mathieu Malaterre <[email protected]>Tested-by Artur Rojek <[email protected]>---
Applied, thanks
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
The following commit has been merged into the timers/core branch of tip:
The following commit has been merged into the timers/core branch of tip:
Commit-ID: ca7b72b5a5f248b72c88441a93bdcee22f42b9b3 Gitweb: https://git.kernel.org/tip/ca7b72b5a5f248b72c88441a93bdcee22f42b9b3 Author: Maarten ter Huurne <[email protected]> AuthorDate: Wed, 12 Feb 2020 15:04:08 -03:00 Committer: Daniel Lezcano <[email protected]> CommitterDate: Thu, 27 Feb 2020 09:37:29 +01:00
clocksource: Add driver for the Ingenic JZ47xx OST
OST is the OS Timer, a 64-bit timer/counter with buffered reading.
SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and JZ4780 have a 64-bit OST.
This driver will register both a clocksource and a sched_clock to the system.
--- drivers/clocksource/Kconfig | 8 +- drivers/clocksource/Makefile | 1 +- drivers/clocksource/ingenic-ost.c | 189 +++++++++++++++++++++++++++++- 3 files changed, 198 insertions(+) create mode 100644 drivers/clocksource/ingenic-ost.c
drivers/clocksource/Kconfig +8 -0
@@ -697,6 +697,14 @@ config INGENIC_TIMER help Support for the timer/counter unit of the Ingenic JZ SoCs. +config INGENIC_OST + bool "Clocksource for Ingenic OS Timer" + depends on MIPS || COMPILE_TEST + depends on COMMON_CLK + select MFD_SYSCON + help + Support for the Operating System Timer of the Ingenic JZ SoCs. + config MICROCHIP_PIT64B bool "Microchip PIT64B support" depends on OF || COMPILE_TEST
drivers/clocksource/Makefile +1 -0
@@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o obj-$(CONFIG_H8300_TPU) += h8300_tpu.o +obj-$(CONFIG_INGENIC_OST) += ingenic-ost.o obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o obj-$(CONFIG_X86_NUMACHIP) += numachip.o
drivers/clocksource/ingenic-ost.c new file +189 -0
189 lines not on this page · raw message