Skip to contentSkip to conversation

arm64: timer: Speed up gic-timer-state check

PATCH In review Andrew Jones 2 participants 3 messages Feb 13, 2020 – Feb 15, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 arm64: timer: Speed up gic-timer-state check

Let's bail out of the wait loop if we see the expected state to save over six seconds of run time. Make sure we wait a bit before reading the registers and double check again after, though, to somewhat mitigate the chance of seeing the expected state by accident.

We also take this opportunity to push more IRQ state code to the library.

---
v3:
- make gic_irq_state general for all irqs < 1020 [Zenghui Yu]
- remove unused gic offsets from arm/timer.c [Alexandru Elisei]
v2:
- check timer irq state twice [Alexandru Elisei]

 arm/timer.c       | 36 ++++++++++++------------------------
 lib/arm/asm/gic.h | 11 ++++++-----
 lib/arm/gic.c     | 45 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 63 insertions(+), 29 deletions(-)
arm/timer.c +12 -24
index f5cf775ce50f..44621b4f2967 100644
@@ -17,8 +17,6 @@
 #define ARCH_TIMER_CTL_IMASK   (1 << 1)
 #define ARCH_TIMER_CTL_ISTATUS (1 << 2)
 
-static void *gic_isactiver;
-static void *gic_ispendr;
 static void *gic_isenabler;
 static void *gic_icenabler;
 
@@ -183,28 +181,22 @@ static bool timer_pending(struct timer_info *info)
 		(info->read_ctl() & ARCH_TIMER_CTL_ISTATUS);
 }
 
-static enum gic_state gic_timer_state(struct timer_info *info)
+static bool gic_timer_check_state(struct timer_info *info,
+				  enum gic_irq_state expected_state)
 {
-	enum gic_state state = GIC_STATE_INACTIVE;
 	int i;
-	bool pending, active;
 
 	/* Wait for up to 1s for the GIC to sample the interrupt. */
 	for (i = 0; i < 10; i++) {
-		pending = readl(gic_ispendr) & (1 << PPI(info->irq));
-		active = readl(gic_isactiver) & (1 << PPI(info->irq));
-		if (!active && !pending)
-			state = GIC_STATE_INACTIVE;
-		if (pending)
-			state = GIC_STATE_PENDING;
-		if (active)
-			state = GIC_STATE_ACTIVE;
-		if (active && pending)
-			state = GIC_STATE_ACTIVE_PENDING;
 		mdelay(100);
+		if (gic_irq_state(PPI(info->irq)) == expected_state) {
+			mdelay(100);
+			if (gic_irq_state(PPI(info->irq)) == expected_state)
+				return true;
+		}
 	}
 
-	return state;
+	return false;
 }
 
 static bool test_cval_10msec(struct timer_info *info)
@@ -253,11 +245,11 @@ static void test_timer(struct timer_info *info)
 	/* Enable the timer, but schedule it for much later */
 	info->write_cval(later);
 	info->write_ctl(ARCH_TIMER_CTL_ENABLE);
-	report(!timer_pending(info) && gic_timer_state(info) == GIC_STATE_INACTIVE,
+	report(!timer_pending(info) && gic_timer_check_state(info, GIC_IRQ_STATE_INACTIVE),
 			"not pending before");
 
 	info->write_cval(now - 1);
-	report(timer_pending(info) && gic_timer_state(info) == GIC_STATE_PENDING,
+	report(timer_pending(info) && gic_timer_check_state(info, GIC_IRQ_STATE_PENDING),
 			"interrupt signal pending");
 
 	/* Disable the timer again and prepare to take interrupts */
@@ -265,12 +257,12 @@ static void test_timer(struct timer_info *info)
 	info->irq_received = false;
 	set_timer_irq_enabled(info, true);
 	report(!info->irq_received, "no interrupt when timer is disabled");
-	report(!timer_pending(info) && gic_timer_state(info) == GIC_STATE_INACTIVE,
+	report(!timer_pending(info) && gic_timer_check_state(info, GIC_IRQ_STATE_INACTIVE),
 			"interrupt signal no longer pending");
 
 	info->write_cval(now - 1);
 	info->write_ctl(ARCH_TIMER_CTL_ENABLE | ARCH_TIMER_CTL_IMASK);
-	report(timer_pending(info) && gic_timer_state(info) == GIC_STATE_INACTIVE,
+	report(timer_pending(info) && gic_timer_check_state(info, GIC_IRQ_STATE_INACTIVE),
 			"interrupt signal not pending");
 
 	report(test_cval_10msec(info), "latency within 10 ms");
@@ -345,14 +337,10 @@ static void test_init(void)
 
 	switch (gic_version()) {
 	case 2:
-		gic_isactiver = gicv2_dist_base() + GICD_ISACTIVER;
-		gic_ispendr = gicv2_dist_base() + GICD_ISPENDR;
 		gic_isenabler = gicv2_dist_base() + GICD_ISENABLER;
 		gic_icenabler = gicv2_dist_base() + GICD_ICENABLER;
 		break;
 	case 3:
-		gic_isactiver = gicv3_sgi_base() + GICR_ISACTIVER0;
-		gic_ispendr = gicv3_sgi_base() + GICR_ISPENDR0;
 		gic_isenabler = gicv3_sgi_base() + GICR_ISENABLER0;
 		gic_icenabler = gicv3_sgi_base() + GICR_ICENABLER0;
 		break;
lib/arm/asm/gic.h +6 -5
index a72e0cde4e9c..922cbe95750c 100644
@@ -47,11 +47,11 @@
 #ifndef __ASSEMBLY__
 #include <asm/cpumask.h>
 
-enum gic_state {
-	GIC_STATE_INACTIVE,
-	GIC_STATE_PENDING,
-	GIC_STATE_ACTIVE,
-	GIC_STATE_ACTIVE_PENDING,
+enum gic_irq_state {
+	GIC_IRQ_STATE_INACTIVE,
+	GIC_IRQ_STATE_PENDING,
+	GIC_IRQ_STATE_ACTIVE,
+	GIC_IRQ_STATE_ACTIVE_PENDING,
 };
 
 /*
@@ -80,6 +80,7 @@ extern u32 gic_iar_irqnr(u32 iar);
 extern void gic_write_eoir(u32 irqstat);
 extern void gic_ipi_send_single(int irq, int cpu);
 extern void gic_ipi_send_mask(int irq, const cpumask_t *dest);
+extern enum gic_irq_state gic_irq_state(int irq);
 
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_H_ */
lib/arm/gic.c +45 -0

48 lines not on this page · raw message

Signature · 6 lines
2.21.1

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
reviewer Reviewed-by Tested-by on v3 1/1
#1 lore raw

Hi Drew,

Quoted 10 lines · Andrew Jones

Let's bail out of the wait loop if we see the expected state to save over six seconds of run time. Make sure we wait a bit before reading the registers and double check again after, though, to somewhat mitigate the chance of seeing the expected state by accident.

We also take this opportunity to push more IRQ state code to the library.

Cc Zenghui Yu <[email protected]>

Please feel free to replace this with:

Quoted 2 lines

Thanks

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

#2 lore raw
Quoted 12 lines · Zenghui Yu

Hi Drew,

Quoted 9 lines · Andrew Jones

Let's bail out of the wait loop if we see the expected state to save over six seconds of run time. Make sure we wait a bit before reading the registers and double check again after, though, to somewhat mitigate the chance of seeing the expected state by accident.

We also take this opportunity to push more IRQ state code to the library.

Quoted 6 lines
Quoted 1 line
Cc Zenghui Yu <[email protected]>

Please feel free to replace this with:

Done. Thanks!

drew

Quoted 7 lines
Quoted 3 lines

Thanks