RDMA/rxe: Fix configuration of atomic queue pair attributes
Subsystems (2)
PATCH 1/1 RDMA/rxe: Fix configuration of atomic queue pair attributes
From the comment above the definition of the roundup_pow_of_two() macro:
The result is undefined when n == 0.
Hence only pass positive values to roundup_pow_of_two(). This patch fixes the following UBSAN complaint:
UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30
--- drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/infiniband/sw/rxe/rxe_qp.c +4 -3
@@ -590,15 +590,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,int err;if (mask &IB_QP_MAX_QP_RD_ATOMIC ) { -int max_rd_atomic =__roundup_pow_of_two (attr->max_rd_atomic); +int max_rd_atomic = attr->max_rd_atomic ? +roundup_pow_of_two (attr->max_rd_atomic) :0 ; qp->attr.max_rd_atomic = max_rd_atomic;atomic_set (&qp->req.rd_atomic, max_rd_atomic); }if (mask &IB_QP_MAX_DEST_RD_ATOMIC ) { -int max_dest_rd_atomic = -__roundup_pow_of_two (attr->max_dest_rd_atomic); +int max_dest_rd_atomic = attr->max_dest_rd_atomic ? +roundup_pow_of_two (attr->max_dest_rd_atomic) :0 ; qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
Zhu Yanjun
maintainerSorry, when max_rd_atomic will be set to 0?
Thanks,
Zhu Yanjun
Quoted 62 lines · Bart Van Assche
From the comment above the definition of the
roundup_pow_of_two()macro:The result is undefined when n == 0.Hence only pass positive values to
roundup_pow_of_two(). This patch fixes the following UBSAN complaint:UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30Cc Moni Shoua <[email protected]>Fixes 8700e3e7c485 ("Soft RoCE driver")Signed-off-by Bart Van Assche <[email protected]>--- drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)drivers/infiniband/sw/rxe/rxe_qp.c +4
-3@@ -590,15 +590,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,int err;if (mask &IB_QP_MAX_QP_RD_ATOMIC ) { -int max_rd_atomic =__roundup_pow_of_two (attr->max_rd_atomic); +int max_rd_atomic = attr->max_rd_atomic ? +roundup_pow_of_two (attr->max_rd_atomic) :0 ; qp->attr.max_rd_atomic = max_rd_atomic;atomic_set (&qp->req.rd_atomic, max_rd_atomic); }if (mask &IB_QP_MAX_DEST_RD_ATOMIC ) { -int max_dest_rd_atomic = -__roundup_pow_of_two (attr->max_dest_rd_atomic); +int max_dest_rd_atomic = attr->max_dest_rd_atomic ? +roundup_pow_of_two (attr->max_dest_rd_atomic) :0 ; qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
Quoted 1 line · Zhu Yanjun
Sorry, when
max_rd_atomicwill be set to 0?
User can set it.ib_uverbs_ex_modify_qp()
-> modify_qp()
-> ib_modify_qp_with_udata()
-> _ib_modify_qp()
-> ib_security_modify_qp()
-> .modify_q()
-> rxe_modify_qp()
-> rxe_qp_from_attr()Quoted 67 lines
Thanks,
Zhu YanjunQuoted 62 lines · Bart Van Assche
From the comment above the definition of the
roundup_pow_of_two()macro:The result is undefined when n == 0.Hence only pass positive values to
roundup_pow_of_two(). This patch fixes the following UBSAN complaint:UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30Cc Moni Shoua <[email protected]>Fixes 8700e3e7c485 ("Soft RoCE driver")Signed-off-by Bart Van Assche <[email protected]>--- drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)drivers/infiniband/sw/rxe/rxe_qp.c +4
-3@@ -590,15 +590,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,int err;if (mask &IB_QP_MAX_QP_RD_ATOMIC ) { -int max_rd_atomic =__roundup_pow_of_two (attr->max_rd_atomic); +int max_rd_atomic = attr->max_rd_atomic ? +roundup_pow_of_two (attr->max_rd_atomic) :0 ; qp->attr.max_rd_atomic = max_rd_atomic;atomic_set (&qp->req.rd_atomic, max_rd_atomic); }if (mask &IB_QP_MAX_DEST_RD_ATOMIC ) { -int max_dest_rd_atomic = -__roundup_pow_of_two (attr->max_dest_rd_atomic); +int max_dest_rd_atomic = attr->max_dest_rd_atomic ? +roundup_pow_of_two (attr->max_dest_rd_atomic) :0 ; qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
Zhu Yanjun
maintainerThanks. I am fine with it.
Quoted 81 lines · Leon Romanovsky
Quoted 1 line · Zhu Yanjun
Sorry, when
max_rd_atomicwill be set to 0?User can set it.
ib_uverbs_ex_modify_qp()
->modify_qp()
->ib_modify_qp_with_udata()
->_ib_modify_qp()-> ib_security_modify_qp() -> .modify_q() -> rxe_modify_qp() -> rxe_qp_from_attr()Quoted 67 lines
Thanks,
Zhu YanjunQuoted 62 lines · Bart Van Assche
From the comment above the definition of the
roundup_pow_of_two()macro:The result is undefined when n == 0.Hence only pass positive values to
roundup_pow_of_two(). This patch fixes the following UBSAN complaint:UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30Cc Moni Shoua <[email protected]>Fixes 8700e3e7c485 ("Soft RoCE driver")Signed-off-by Bart Van Assche <[email protected]>--- drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)drivers/infiniband/sw/rxe/rxe_qp.c +4
-3@@ -590,15 +590,16 @@ int rxe_qp_from_attr(struct rxe_qp *qp, struct ib_qp_attr *attr, int mask,int err;if (mask &IB_QP_MAX_QP_RD_ATOMIC ) { -int max_rd_atomic =__roundup_pow_of_two (attr->max_rd_atomic); +int max_rd_atomic = attr->max_rd_atomic ? +roundup_pow_of_two (attr->max_rd_atomic) :0 ; qp->attr.max_rd_atomic = max_rd_atomic;atomic_set (&qp->req.rd_atomic, max_rd_atomic); }if (mask &IB_QP_MAX_DEST_RD_ATOMIC ) { -int max_dest_rd_atomic = -__roundup_pow_of_two (attr->max_dest_rd_atomic); +int max_dest_rd_atomic = attr->max_dest_rd_atomic ? +roundup_pow_of_two (attr->max_dest_rd_atomic) :0 ; qp->attr.max_dest_rd_atomic = max_dest_rd_atomic;
Leon Romanovsky
Reviewed-byQuoted 2 lines · Zhu Yanjun
Thanks. I am fine with it.
I'm fine too.
Thanks,
Jason Gunthorpe
AppliedQuoted 30 lines · Bart Van Assche
Quoted 1 line
From the comment above the definition of the
roundup_pow_of_two()macro:The result is undefined when n == 0.Hence only pass positive values to
roundup_pow_of_two(). This patch fixes the following UBSAN complaint:UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' Call Trace: dump_stack+0xa5/0xe6 ubsan_epilogue+0x9/0x26 __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9 rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe] rxe_modify_qp+0x59/0x70 [rdma_rxe] _ib_modify_qp+0x5aa/0x7c0 [ib_core] ib_modify_qp+0x3b/0x50 [ib_core] cma_modify_qp_rtr+0x234/0x260 [rdma_cm] __rdma_accept+0x1a7/0x650 [rdma_cm] nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma] cma_cm_event_handler+0x6b/0x330 [rdma_cm] cma_ib_req_handler+0xe60/0x22d0 [rdma_cm] cm_process_work+0x30/0x140 [ib_cm] cm_req_handler+0x11f4/0x1cd0 [ib_cm] cm_work_handler+0xb8/0x344e [ib_cm] process_one_work+0x569/0xb60 worker_thread+0x7a/0x5d0 kthread+0x1e6/0x210 ret_from_fork+0x24/0x30
Quoted 7 lines
Cc Moni Shoua <[email protected]>Fixes 8700e3e7c485 ("Soft RoCE driver")Signed-off-by Bart Van Assche <[email protected]>Reviewed-by Leon Romanovsky <[email protected]>--- drivers/infiniband/sw/rxe/rxe_qp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
Applied to for-next, thanks
Jason