Skip to contentSkip to conversation

mx7dsabresd: Boot in non secure by default

PATCH New Fabio Estevam 2 participants 2 messages Feb 18, 2020 – Mar 10, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx7dsabresd: Boot in non secure by default

Booting a mainline kernel in secure mode on i.MX7D causes only one CPU to be brought up.

Change it to booting in non secure mode by default, which allows the two CPUs to be brought up.

It does have a side effect of not probing the CAAM driver. If CAAM driver is needed then a secure world OS such as OPTEE needs to be used.

---
 configs/mx7dsabresd_defconfig      | 1 -
 configs/mx7dsabresd_qspi_defconfig | 1 -
 2 files changed, 2 deletions(-)
configs/mx7dsabresd_defconfig +0 -1
index 2a9fdac338..d9fa1d7017 100644
@@ -5,7 +5,6 @@ CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
configs/mx7dsabresd_qspi_defconfig +0 -1
index 865ce30dc2..993a6fb263 100644
@@ -4,7 +4,6 @@ CONFIG_SYS_TEXT_BASE=0x87800000
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
 # CONFIG_ARMV7_VIRT is not set
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 mx7dsabresd: Boot in non secure by default

Quoted 8 lines

Booting a mainline kernel in secure mode on i.MX7D causes only one CPU to be brought up.
Change it to booting in non secure mode by default, which allows the two CPUs to be brought up.
It does have a side effect of not probing the CAAM driver. If CAAM driver is needed then a secure world OS such as OPTEE needs to be used.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================