ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper
Subsystems (2)
PATCH 1/4 ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper
From: Igor Opaniuk <[email protected]>
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):
bool ofnode_pre_reloc(ofnode node)
{
/* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
* had property dm-pre-reloc or u-boot,dm-spl/tpl.
* They are removed in final dtb (fdtgrep 2nd pass)
*/
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
return true;
/*
* In regular builds individual spl and tpl handling both
* count as handled pre-relocation for later second init.
*/
if (ofnode_read_bool(node, "u-boot,dm-spl") ||
ofnode_read_bool(node, "u-boot,dm-tpl"))
return true;
return false;
}Howewer, to avoid confusion in future, replace dm-spl %s/dm-spl/dm-pre-proper/g properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.
---
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 62 +++++++++++----------- 1 file changed, 31 insertions(+), 31 deletions(-)
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +31 -31
@@ -4,125 +4,125 @@ */ &mu { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &clk { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &iomuxc { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; };
Signature · 1 line
2.17.1
PATCH 2/4 ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper
From: Igor Opaniuk <[email protected]>
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):
bool ofnode_pre_reloc(ofnode node)
{
/* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
* had property dm-pre-reloc or u-boot,dm-spl/tpl.
* They are removed in final dtb (fdtgrep 2nd pass)
*/
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
return true;
if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
return true;
/*
* In regular builds individual spl and tpl handling both
* count as handled pre-relocation for later second init.
*/
if (ofnode_read_bool(node, "u-boot,dm-spl") ||
ofnode_read_bool(node, "u-boot,dm-tpl"))
return true;
return false;
}Howewer, to avoid confusion in future, replace dm-spl %s/dm-spl/dm-pre-proper/g properties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 56 ++++++++++---------- 1 file changed, 28 insertions(+), 28 deletions(-)
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +28 -28
@@ -5,113 +5,113 @@ &{/imx8qx-pm} { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &mu { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &clk { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &iomuxc { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; };
Signature · 1 line
2.17.1
PATCH 3/4 ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.
This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).
---
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +8 -0
@@ -51,6 +51,14 @@ u-boot,dm-pre-proper; }; +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart1 { + u-boot,dm-pre-proper; +}; + &pd_conn { u-boot,dm-pre-proper; };
Signature · 1 line
2.17.1
PATCH 4/4 ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.
This fixes the issue with permanent failing of invocation of power_domain_get_by_index() in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +12 -0
@@ -56,6 +56,18 @@ u-boot,dm-pre-proper; }; +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart0 { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart3 { + u-boot,dm-pre-proper; +}; + &pd_conn { u-boot,dm-pre-proper; };
Signature · 1 line
2.17.1
PATCH 1/4 ARM: dts: imx8qm-apalis: replace dm-spl with dm-pre-proper
In reply to Igor OpaniukQuoted 31 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):bool
ofnode_pre_reloc(ofnode node){ /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property dm-pre-reloc or u-boot,dm-spl/tpl. * They are removed in final dtb (fdtgrep 2nd pass) */ return true; if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) return true; if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) return true; /* * In regular builds individual spl and tpl handling both * count as handled pre-relocation for later second init. */ if (ofnode_read_bool(node, "u-boot,dm-spl") || ofnode_read_bool(node, "u-boot,dm-tpl")) return true; return false; }
Quoted 6 lines
Howewer, to avoid confusion in future, replace dm-spl
%s/dm-spl/dm-pre-proper/gproperties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.Signed-off-by Igor Opaniuk <[email protected]>
Quoted 169 lines
---
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 62 +++++++++++----------- 1 file changed, 31 insertions(+), 31 deletions(-)arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +31
-32@@ -4,125 +4,125 @@ */ &mu { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &clk { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &iomuxc { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; --2.17.1
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH 2/4 ARM: dts: imx8qxp-colibri: replace dm-spl with dm-pre-proper
In reply to Igor OpaniukQuoted 31 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
For non-SPL/TPL setups dm-spl, dm-tpl, dm-pre-proper, dm-pre-reloc are handled equally, forcing the nodes with these properties
to be accessible and device being probed
before pre-relocation of U-Boot proper (drivers/core/util.c):bool
ofnode_pre_reloc(ofnode node){ /* for SPL and TPL the remaining nodes after the fdtgrep 1st pass * had property dm-pre-reloc or u-boot,dm-spl/tpl. * They are removed in final dtb (fdtgrep 2nd pass) */ return true; if (ofnode_read_bool(node, "u-boot,dm-pre-reloc")) return true; if (ofnode_read_bool(node, "u-boot,dm-pre-proper")) return true; /* * In regular builds individual spl and tpl handling both * count as handled pre-relocation for later second init. */ if (ofnode_read_bool(node, "u-boot,dm-spl") || ofnode_read_bool(node, "u-boot,dm-tpl")) return true; return false; }
Quoted 6 lines
Howewer, to avoid confusion in future, replace dm-spl
%s/dm-spl/dm-pre-proper/gproperties to dm-pre-proper to explicitly state that they are handled during pre-relocation stage of U-Boot proper.Signed-off-by Igor Opaniuk <[email protected]>
Quoted 154 lines
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 56 ++++++++++---------- 1 file changed, 28 insertions(+), 28 deletions(-)arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +28
-29@@ -5,113 +5,113 @@ &{/imx8qx-pm} { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &mu { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &clk { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &iomuxc { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_lsio_gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &pd_conn_sdch2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio0 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio4 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio5 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio6 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &gpio7 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &lpuart3 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc1 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; &usdhc2 { - u-boot,dm-spl; + u-boot,dm-pre-proper; }; --2.17.1
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH 3/4 ARM: dts: imx8qm-apalis: dm-pre-proper for pd_dma nodes
In reply to Igor OpaniukQuoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.
Quoted 6 lines
This fixes the issue with permanent failing of invocation of
power_domain_get_by_index()in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).Fixes f0cc4eae9a ("core: device: use dev_power_domain_on")Signed-off-by Igor Opaniuk <[email protected]>
Quoted 27 lines
---
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi +8
-1@@ -51,6 +51,14 @@ u-boot,dm-pre-proper; }; +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart1 { + u-boot,dm-pre-proper; +}; + &pd_conn { u-boot,dm-pre-proper; }; --2.17.1
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH 4/4 ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
In reply to Igor OpaniukQuoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.
Quoted 6 lines
This fixes the issue with permanent failing of invocation of
power_domain_get_by_index()in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).Fixes f0cc4eae9a ("core: device: use dev_power_domain_on")Signed-off-by Igor Opaniuk <[email protected]>
Quoted 31 lines
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +12
-1@@ -56,6 +56,18 @@ u-boot,dm-pre-proper; }; +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart0 { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart3 { + u-boot,dm-pre-proper; +}; + &pd_conn { u-boot,dm-pre-proper; }; --2.17.1
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH 4/4 ARM: dts: imx8qxp-colibri: dm-pre-proper for pd_dma nodes
Hi Stefano,
Quoted 54 lines · Oleksandr Suvorov
Quoted 6 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
pd_dma_* nodes should be accessible during pre-relocation stage of U-Boot proper for properly handling power domains.
Quoted 6 lines
This fixes the issue with permanent failing of invocation of
power_domain_get_by_index()in the common code of DM power domain uclass (drivers/power/domain/power-domain-uclass.c).Fixes f0cc4eae9a ("core: device: use dev_power_domain_on")Signed-off-by Igor Opaniuk <[email protected]>Reviewed-by Oleksandr Suvorov <[email protected]>Quoted 29 lines
---
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi +12
-1@@ -56,6 +56,18 @@ u-boot,dm-pre-proper; }; +&pd_dma { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart0 { + u-boot,dm-pre-proper; +}; + +&pd_dma_lpuart3 { + u-boot,dm-pre-proper; +}; + &pd_conn { u-boot,dm-pre-proper; }; --Quoted 2 lines
2.17.1
--
Best regards
Oleksandr Suvorov
Quoted 3 lines
Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
Could you please pull this patch-series for v2020.04, as it fixes broken U-Boot on both Colibri iMX8QXP/Apalis iMX8QM?
Thanks!
Signature · 8 lines
Best regards - Freundliche Gr?sse - Meilleures salutations Igor Opaniuk mailto: igor.opaniuk at gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk