Skip to contentSkip to conversation

Add support for reporting papr-scm nvdimm health

PATCH Superseded Vaibhav Jain 1 participant 9 messages Feb 20, 2020 libnvdimm: non-volatile memory device

v1 of 13 Superseded Latest is v13 →

lore
Share & tools
lore
#0 lore raw

cover Add support for reporting papr-scm nvdimm health

This patch-set proposes changes to libndctl to add support for reporting health for nvdimms that support the PAPR standard[1]. The standard defines heathenism (HCALL) through which a guest kernel can query and fetch health and performance stats of an nvdimm attached to the hypervisor[2]. Until now 'ndctl' was unable to report these stats for papr_scm dimms on PPC64 guests due to absence of ACPI/NFIT, a limitation which this patch-set tries to address.

The patch-set introduces support for the new PAPR-SCM DSM family defined at
[3] via a new dimm-ops named 'papr_scm_dimm_ops'. Infrastructure to probe and distinguish papr-scm dimms from other dimm families that may support ACPI/NFIT is implemented by updating the 'struct ndctl_dimm' initialization routines to bifurcate based on the nvdimm type. We also introduce two new dimm-ops for handling initialization of dimm specific data for specific DSM families.

These changes coupled with proposed ndtcl changes located at Ref[4] should provide a way for the user to retrieve NVDIMM health status using ndtcl for papr_scm guests. Below is a sample output using proposed kernel + ndctl changes:

 # ndctl list -DH
[
  {
    "dev":"nmem0",
    "health":{
      "health_state":"fatal",
      "shutdown_state":"dirty"
    }
  }
]

Structure of the patchset
=========================

We start with a re-factoring patch that splits the 'add_dimm()' function into two functions one that take care of allocating and initializing 'struct ndctl_dimm' and another that takes care of initializing nfit specific dimm attributes.

Patch-2 introduces new dimm ops 'dimm_init()' & 'dimm_uninit()' to handle DSM family specific initialization of 'struct ndctl_dimm'.

Patch-3 introduces probe function of papr_scm nvdimms and assigning 'papr_scm_dimm_ops' to 'dimm->ops' if needed. Subsequent patch-4 adds support for parsing papr_scm nvdimm flags and updating 'dimm->flags' with them.

Patches-5,6 implements scaffolding to add support for PAPR_SCM DSM commands and pull in their definitions from the kernel. This implementation resides in newly added 'papr_scm.c' file.

Finally Patched-7,8 add support for issuing and handling the result of 'struct ndctl_cmd' to request dimm health stats from papr_scm kernel module and returning appropriate health status to libndctl for reporting.

References:
[1]: "Power Architecture Platform Reference"
https://en.wikipedia.org/wiki/Power_Architecture_Platform_Reference
[2]: "[DOC,v2] powerpc: Provide initial documentation for PAPR hcalls"

     https://patchwork.ozlabs.org/patch/1154292/
[3]: "[PATCH 5/8] powerpc/uapi: Introduce uapi header 'papr_scm_dsm.h' for
     papr_scm DSMs"
     https://patchwork.ozlabs.org/patch/1241352/
[4]: "powerpc/papr_scm: Add support for reporting nvdimm health"
     https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=159701     

Vaibhav Jain (8):
libndctl: Refactor out add_dimm() to handle NFIT specific init
libndctl: Introduce a new dimm-ops dimm_init() & dimm_uninit()
libncdtl: Add initial support for NVDIMM_FAMILY_PAPR_SCM dimm family
libndctl: Add support for parsing of_pmem dimm flags and monitor mode libndctl,papr_scm: Add definitions for PAPR_SCM DSM commands libndctl,papr_scm: Implement scaffolding to issue and handle DSM cmds libndctl,papr_scm: Implement support for DSM_PAPR_SCM_HEALTH libndctl,papr_scm: Add support for reporting bad shutdown

 ndctl/lib/Makefile.am    |   1 +
 ndctl/lib/libndctl.c     | 263 +++++++++++++++++++++++++----------
 ndctl/lib/papr_scm.c     | 292 +++++++++++++++++++++++++++++++++++++++
 ndctl/lib/papr_scm_dsm.h | 143 +++++++++++++++++++
 ndctl/lib/private.h      |   7 +
 ndctl/libndctl.h         |   1 +
 ndctl/ndctl.h            |   1 +
 7 files changed, 634 insertions(+), 74 deletions(-)
 create mode 100644 ndctl/lib/papr_scm.c
 create mode 100644 ndctl/lib/papr_scm_dsm.h
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#1 lore raw

PATCH 1/8 libndctl: Refactor out add_dimm() to handle NFIT specific init

Presently add_dimm() only probes dimms that support NFIT/ACPI. Hence this patch refactors this functionality into two functions namely add_dimm() and add_nfit_dimm(). Function add_dimm() performs allocation and common 'struct ndctl_dimm' initialization and depending on whether the dimm-bus supports NIFT, calls add_nfit_dimm(). Once the probe is completed based on the value of 'ndctl_dimm.cmd_family' appropriate dimm-ops are assigned to the dimm.

In case dimm-bus is of unknown type or doesn't support NFIT the initialization still continues, with no dimm-ops assigned to the 'struct ndctl_dimm' there-by limiting the functionality available.

This patch shouldn't introduce any behavioral change.

---
 ndctl/lib/libndctl.c | 193 +++++++++++++++++++++++++------------------
 1 file changed, 112 insertions(+), 81 deletions(-)
ndctl/lib/libndctl.c +112 -81
index d6a28002e7d6..38ddfea6dbc0 100644
@@ -1401,82 +1401,15 @@ static int ndctl_bind(struct ndctl_ctx *ctx, struct kmod_module *module,
 static int ndctl_unbind(struct ndctl_ctx *ctx, const char *devpath);
 static struct kmod_module *to_module(struct ndctl_ctx *ctx, const char *alias);
 
-static void *add_dimm(void *parent, int id, const char *dimm_base)
+static int add_nfit_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
 {
-	int formats, i;
-	struct ndctl_dimm *dimm;
+	int i, rc = -1;
 	char buf[SYSFS_ATTR_SIZE];
-	struct ndctl_bus *bus = parent;
-	struct ndctl_ctx *ctx = bus->ctx;
+	struct ndctl_ctx *ctx = dimm->bus->ctx;
 	char *path = calloc(1, strlen(dimm_base) + 100);
 
 	if (!path)
-		return NULL;
-
-	sprintf(path, "%s/nfit/formats", dimm_base);
-	if (sysfs_read_attr(ctx, path, buf) < 0)
-		formats = 1;
-	else
-		formats = clamp(strtoul(buf, NULL, 0), 1UL, 2UL);
-
-	dimm = calloc(1, sizeof(*dimm) + sizeof(int) * formats);
-	if (!dimm)
-		goto err_dimm;
-	dimm->bus = bus;
-	dimm->id = id;
-
-	sprintf(path, "%s/dev", dimm_base);
-	if (sysfs_read_attr(ctx, path, buf) < 0)
-		goto err_read;
-	if (sscanf(buf, "%d:%d", &dimm->major, &dimm->minor) != 2)
-		goto err_read;
-
-	sprintf(path, "%s/commands", dimm_base);
-	if (sysfs_read_attr(ctx, path, buf) < 0)
-		goto err_read;
-	dimm->cmd_mask = parse_commands(buf, 1);
-
-	dimm->dimm_buf = calloc(1, strlen(dimm_base) + 50);
-	if (!dimm->dimm_buf)
-		goto err_read;
-	dimm->buf_len = strlen(dimm_base) + 50;
-
-	dimm->dimm_path = strdup(dimm_base);
-	if (!dimm->dimm_path)
-		goto err_read;
-
-	sprintf(path, "%s/modalias", dimm_base);
-	if (sysfs_read_attr(ctx, path, buf) < 0)
-		goto err_read;
-	dimm->module = to_module(ctx, buf);
-
-	dimm->handle = -1;
-	dimm->phys_id = -1;
-	dimm->serial = -1;
-	dimm->vendor_id = -1;
-	dimm->device_id = -1;
-	dimm->revision_id = -1;
-	dimm->health_eventfd = -1;
-	dimm->dirty_shutdown = -ENOENT;
-	dimm->subsystem_vendor_id = -1;
-	dimm->subsystem_device_id = -1;
-	dimm->subsystem_revision_id = -1;
-	dimm->manufacturing_date = -1;
-	dimm->manufacturing_location = -1;
-	dimm->cmd_family = -1;
-	dimm->nfit_dsm_mask = ULONG_MAX;
-	for (i = 0; i < formats; i++)
-		dimm->format[i] = -1;
-
-	sprintf(path, "%s/flags", dimm_base);
-	if (sysfs_read_attr(ctx, path, buf) < 0) {
-		dimm->locked = -1;
-		dimm->aliased = -1;
-	} else
-		parse_dimm_flags(dimm, buf);
-
-	if (!ndctl_bus_has_nfit(bus))
-		goto out;
+		return -1;
 
 	/*
 	 * 'unique_id' may not be available on older kernels, so don't
@@ -1542,24 +1475,15 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
 	sprintf(path, "%s/nfit/family", dimm_base);
 	if (sysfs_read_attr(ctx, path, buf) == 0)
 		dimm->cmd_family = strtoul(buf, NULL, 0);
-	if (dimm->cmd_family == NVDIMM_FAMILY_INTEL)
-		dimm->ops = intel_dimm_ops;
-	if (dimm->cmd_family == NVDIMM_FAMILY_HPE1)
-		dimm->ops = hpe1_dimm_ops;
-	if (dimm->cmd_family == NVDIMM_FAMILY_MSFT)
-		dimm->ops = msft_dimm_ops;
-	if (dimm->cmd_family == NVDIMM_FAMILY_HYPERV)
-		dimm->ops = hyperv_dimm_ops;
 
 	sprintf(path, "%s/nfit/dsm_mask", dimm_base);
 	if (sysfs_read_attr(ctx, path, buf) == 0)
 		dimm->nfit_dsm_mask = strtoul(buf, NULL, 0);
 
-	dimm->formats = formats;
 	sprintf(path, "%s/nfit/format", dimm_base);
 	if (sysfs_read_attr(ctx, path, buf) == 0)
 		dimm->format[0] = strtoul(buf, NULL, 0);
-	for (i = 1; i < formats; i++) {
+	for (i = 1; i < dimm->formats; i++) {
 		sprintf(path, "%s/nfit/format%d", dimm_base, i);
 		if (sysfs_read_attr(ctx, path, buf) == 0)
 			dimm->format[i] = strtoul(buf, NULL, 0);
@@ -1570,7 +1494,114 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
 		parse_nfit_mem_flags(dimm, buf);
 
 	dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
+	rc = 0;
+ err_read:
+
+	free(path);
+	return rc;
+}
+
+static void *add_dimm(void *parent, int id, const char *dimm_base)
+{
+	int formats, i, rc = -ENODEV;
+	struct ndctl_dimm *dimm = NULL;
+	char buf[SYSFS_ATTR_SIZE];
+	struct ndctl_bus *bus = parent;
+	struct ndctl_ctx *ctx = bus->ctx;
+	char *path = calloc(1, strlen(dimm_base) + 100);
+
+	if (!path)
+		return NULL;
+
+	sprintf(path, "%s/nfit/formats", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		formats = 1;
+	else
+		formats = clamp(strtoul(buf, NULL, 0), 1UL, 2UL);
+
+	dimm = calloc(1, sizeof(*dimm) + sizeof(int) * formats);
+	if (!dimm)
+		goto err_dimm;
+	dimm->bus = bus;
+	dimm->id = id;
+
+	sprintf(path, "%s/dev", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		goto err_read;
+	if (sscanf(buf, "%d:%d", &dimm->major, &dimm->minor) != 2)
+		goto err_read;
+
+	sprintf(path, "%s/commands", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		goto err_read;
+	dimm->cmd_mask = parse_commands(buf, 1);
+
+	dimm->dimm_buf = calloc(1, strlen(dimm_base) + 50);
+	if (!dimm->dimm_buf)
+		goto err_read;
+	dimm->buf_len = strlen(dimm_base) + 50;
+
+	dimm->dimm_path = strdup(dimm_base);
+	if (!dimm->dimm_path)
+		goto err_read;
+
+	sprintf(path, "%s/modalias", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		goto err_read;
+	dimm->module = to_module(ctx, buf);
+
+	dimm->handle = -1;
+	dimm->phys_id = -1;
+	dimm->serial = -1;
+	dimm->vendor_id = -1;
+	dimm->device_id = -1;
+	dimm->revision_id = -1;
+	dimm->health_eventfd = -1;
+	dimm->dirty_shutdown = -ENOENT;
+	dimm->subsystem_vendor_id = -1;
+	dimm->subsystem_device_id = -1;
+	dimm->subsystem_revision_id = -1;
+	dimm->manufacturing_date = -1;
+	dimm->manufacturing_location = -1;
+	dimm->cmd_family = -1;
+	dimm->nfit_dsm_mask = ULONG_MAX;
+	for (i = 0; i < formats; i++)
+		dimm->format[i] = -1;
+
+	sprintf(path, "%s/flags", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0) {
+		dimm->locked = -1;
+		dimm->aliased = -1;
+	} else
+		parse_dimm_flags(dimm, buf);
+
+	/* Check if the given dimm supports nfit */
+	if (ndctl_bus_has_nfit(bus)) {
+		dimm->formats = formats;
+		rc = add_nfit_dimm(dimm, dimm_base);
+	}
+
+	if (rc == -ENODEV) {
+		/* Unprobed dimm with no family */
+		rc = 0;
+		goto out;
+	}
+
+	/* Assign dimm-ops based on command family */
+	if (dimm->cmd_family == NVDIMM_FAMILY_INTEL)
+		dimm->ops = intel_dimm_ops;
+	if (dimm->cmd_family == NVDIMM_FAMILY_HPE1)
+		dimm->ops = hpe1_dimm_ops;
+	if (dimm->cmd_family == NVDIMM_FAMILY_MSFT)
+		dimm->ops = msft_dimm_ops;
+	if (dimm->cmd_family == NVDIMM_FAMILY_HYPERV)
+		dimm->ops = hyperv_dimm_ops;
  out:
+	if (rc) {
+		err(ctx, "Unable to probe dimm:%d. Err:%d\n", id, rc);
+		goto err_read;
+	}
+
 	list_add(&bus->dimms, &dimm->list);
 	free(path);
 
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#2 lore raw

PATCH 2/8 libndctl: Introduce a new dimm-ops dimm_init() & dimm_uninit()

In reply to Vaibhav Jain

There are scenarios when a dimm-provider need to allocate some per-dimm data that can be quickly retrieved. This data can be used to cache data that spans multiple 'struct ndctl_cmd' submissions.

Unfortunately currently in libnvdimm there is no easiy way to implement this. Even if this data is some how store in an overloaded field of 'struct ndctl_dimm', managing its lifetime is a challenge.

To solve this problem this patch proposes a new member 'struct ndctl_dimm.dimm_user_data' to store per-dimm data thats specific to a dimm-provider. Also two new dimm-ops namely dimm_init() & dimm_uninit() are introduced that can be used to manage the lifetime of this per-dimm data.

Semantics
=========
int (*dimm_init)(struct ndctl_dimm *):

This callback will be called just after dimm-probe inside add_dimm() is completed. Dimm-providers should use this callback to allocate per-dimm data and assign it to 'struct ndctl_dimm.dimm_user_data' member. In case this function returns an error, dimm initialization is halted and errors out.

void (*dimm_uninit)(struct ndctl_dimm *):
This callback will be called during free_dimm() and is only called if previous call to 'dimm_ops->dimm_init()' had reported no error. Dimm-providers should use this callback to unallocate and cleanup 'dimm_user_data'.

---
 ndctl/lib/libndctl.c | 13 ++++++++++++-
 ndctl/lib/private.h  |  5 +++++
 2 files changed, 17 insertions(+), 1 deletion(-)
ndctl/lib/libndctl.c +12 -1
index 38ddfea6dbc0..a5f5fdac9f48 100644
@@ -596,6 +596,10 @@ static void free_dimm(struct ndctl_dimm *dimm)
 {
 	if (!dimm)
 		return;
+	/* If needed call the dimm uninitialization function */
+	if (dimm->ops && dimm->ops->dimm_uninit)
+		dimm->ops->dimm_uninit(dimm);
+
 	free(dimm->unique_id);
 	free(dimm->dimm_buf);
 	free(dimm->dimm_path);
@@ -1596,8 +1600,15 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
 		dimm->ops = msft_dimm_ops;
 	if (dimm->cmd_family == NVDIMM_FAMILY_HYPERV)
 		dimm->ops = hyperv_dimm_ops;
- out:
+
+	/* Call the dimm initialization function if needed */
+	if (!rc && dimm->ops && dimm->ops->dimm_init)
+		rc = dimm->ops->dimm_init(dimm);
+
+out:
 	if (rc) {
+		/* Ensure dimm_uninit() is not called during free_dimm() */
+		dimm->ops = NULL;
 		err(ctx, "Unable to probe dimm:%d. Err:%d\n", id, rc);
 		goto err_read;
 	}
ndctl/lib/private.h +5 -0
index 1f6a01c55377..fb7fa47f1f37 100644
@@ -98,6 +98,7 @@ struct ndctl_dimm {
 	} flags;
 	int locked;
 	int aliased;
+	void *dimm_user_data;
 	struct list_node list;
 	int formats;
 	int format[0];
@@ -340,6 +341,10 @@ struct ndctl_dimm_ops {
 	struct ndctl_cmd *(*new_ack_shutdown_count)(struct ndctl_dimm *);
 	int (*fw_update_supported)(struct ndctl_dimm *);
 	int (*xlat_firmware_status)(struct ndctl_cmd *);
+	/* Called just after dimm is initialized and probed */
+	int (*dimm_init)(struct ndctl_dimm *);
+	/* Called just before struct ndctl_dimm is de-allocated */
+	void (*dimm_uninit)(struct ndctl_dimm *);
 };
 
 struct ndctl_dimm_ops * const intel_dimm_ops;
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#3 lore raw

PATCH 3/8 libncdtl: Add initial support for NVDIMM_FAMILY_PAPR_SCM dimm family

In reply to Vaibhav Jain

The patch-set adds necessary scaffolding in libndctl for dimms that support papr_scm specification[1]. Since there can be platforms that support Open-Firmware[2] but not the papr_scm specification, hence the changes proposed first add support for probing if the dimm bus supports Open-Firmware. This is done via querying for sysfs attribute 'of_node' in dimm device sysfs directory. If available newly introduced member 'struct ndctl_bus.has_of_node' is set.

During the probe of the dimm and execution of add_dimm(), the newly introduced add_of_pmem_dimm() is called if dimm bus reports supports Open-Firmware.

Function add_of_pmem_dimm() queries the 'compatible' device tree attribute and based on its value assign NVDIMM_FAMILY_PAPR_SCM to the dimm command family. In future based on the contents of 'compatible' attribute more of_pmem dimm families can be queried.

Presently the dimm-ops implementation for NVDIMM_FAMILY_PAPR_SCM is available in global variable 'papr_scm_dimm_ops' which is a NULL pointer. Subsequent patches will provide a working dimm-ops implementation pointed to by 'papr_scm_dimm_ops'.

References:
[1] : https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?id=58b278f568f0509497e2df7310bfd719156a60d1
[2] : https://en.wikipedia.org/wiki/Open_Firmware

---
 ndctl/lib/libndctl.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 ndctl/lib/private.h  |  2 ++
 ndctl/libndctl.h     |  1 +
 ndctl/ndctl.h        |  1 +
 4 files changed, 46 insertions(+)
ndctl/lib/libndctl.c +42 -0
index a5f5fdac9f48..650406d27512 100644
@@ -858,6 +858,12 @@ static void *add_bus(void *parent, int id, const char *ctl_base)
 		bus->revision = strtoul(buf, NULL, 0);
 	}
 
+	sprintf(path, "%s/device/of_node/compatible", ctl_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		bus->has_of_node = 0;
+	else
+		bus->has_of_node = 1;
+
 	sprintf(path, "%s/device/nfit/dsm_mask", ctl_base);
 	if (sysfs_read_attr(ctx, path, buf) < 0)
 		bus->nfit_dsm_mask = 0;
@@ -966,6 +972,10 @@ NDCTL_EXPORT int ndctl_bus_has_nfit(struct ndctl_bus *bus)
 	return bus->has_nfit;
 }
 
+NDCTL_EXPORT int ndctl_bus_has_of_node(struct ndctl_bus *bus)
+{
+	return bus->has_of_node;
+}
 /**
  * ndctl_bus_get_major - nd bus character device major number
  * @bus: ndctl_bus instance returned from ndctl_bus_get_{first|next}
@@ -1405,6 +1415,34 @@ static int ndctl_bind(struct ndctl_ctx *ctx, struct kmod_module *module,
 static int ndctl_unbind(struct ndctl_ctx *ctx, const char *devpath);
 static struct kmod_module *to_module(struct ndctl_ctx *ctx, const char *alias);
 
+static int add_of_pmem_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
+{
+	int rc = -ENODEV;
+	char buf[SYSFS_ATTR_SIZE];
+	struct ndctl_ctx *ctx = dimm->bus->ctx;
+	char *path = calloc(1, strlen(dimm_base) + 100);
+
+	dbg(ctx, "Probing of_pmem dimm %d at %s\n", dimm->id, dimm_base);
+
+	if (!path)
+		return -ENOMEM;
+
+	sprintf(path, "%s/../of_node/compatible", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0)
+		goto out;
+
+
+	dbg(ctx, "Compatible of_pmem dimm %d at %s\n", dimm->id, buf);
+	if (strcmp(buf, "ibm,pmemory") == 0) {
+		dimm->cmd_family = NVDIMM_FAMILY_PAPR_SCM;
+		rc = 0;
+		goto out;
+	}
+out:
+	free(path);
+	return rc;
+}
+
 static int add_nfit_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
 {
 	int i, rc = -1;
@@ -1583,6 +1621,8 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
 	if (ndctl_bus_has_nfit(bus)) {
 		dimm->formats = formats;
 		rc = add_nfit_dimm(dimm, dimm_base);
+	} else if (ndctl_bus_has_of_node(bus)) {
+		rc = add_of_pmem_dimm(dimm, dimm_base);
 	}
 
 	if (rc == -ENODEV) {
@@ -1600,6 +1640,8 @@ static void *add_dimm(void *parent, int id, const char *dimm_base)
 		dimm->ops = msft_dimm_ops;
 	if (dimm->cmd_family == NVDIMM_FAMILY_HYPERV)
 		dimm->ops = hyperv_dimm_ops;
+	if (dimm->cmd_family == NVDIMM_FAMILY_PAPR_SCM)
+		dimm->ops = papr_scm_dimm_ops;
 
 	/* Call the dimm initialization function if needed */
 	if (!rc && dimm->ops && dimm->ops->dimm_init)
ndctl/lib/private.h +2 -0
index fb7fa47f1f37..16754eda7634 100644
@@ -167,6 +167,7 @@ struct ndctl_bus {
 	int dimms_init;
 	int regions_init;
 	int has_nfit;
+	int has_of_node;
 	char *bus_path;
 	char *bus_buf;
 	size_t buf_len;
@@ -351,6 +352,7 @@ struct ndctl_dimm_ops * const intel_dimm_ops;
 struct ndctl_dimm_ops * const hpe1_dimm_ops;
 struct ndctl_dimm_ops * const msft_dimm_ops;
 struct ndctl_dimm_ops * const hyperv_dimm_ops;
+struct ndctl_dimm_ops * const papr_scm_dimm_ops;
 
 static inline struct ndctl_bus *cmd_to_bus(struct ndctl_cmd *cmd)
 {
ndctl/libndctl.h +1 -0
index 9a53049e7f61..32202654885a 100644
@@ -119,6 +119,7 @@ struct ndctl_bus *ndctl_bus_get_next(struct ndctl_bus *bus);
              bus = ndctl_bus_get_next(bus))
 struct ndctl_ctx *ndctl_bus_get_ctx(struct ndctl_bus *bus);
 int ndctl_bus_has_nfit(struct ndctl_bus *bus);
+int ndctl_bus_has_of_node(struct ndctl_bus *bus);
 unsigned int ndctl_bus_get_major(struct ndctl_bus *bus);
 unsigned int ndctl_bus_get_minor(struct ndctl_bus *bus);
 const char *ndctl_bus_get_devname(struct ndctl_bus *bus);
ndctl/ndctl.h +1 -0
index 008f81cdeb9f..426708e1fd9b 100644
@@ -263,6 +263,7 @@ struct nd_cmd_pkg {
 #define NVDIMM_FAMILY_HPE2 2
 #define NVDIMM_FAMILY_MSFT 3
 #define NVDIMM_FAMILY_HYPERV 4
+#define NVDIMM_FAMILY_PAPR_SCM 5
 
 #define ND_IOCTL_CALL			_IOWR(ND_IOCTL, ND_CMD_CALL,\
 					struct nd_cmd_pkg)
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#4 lore raw

PATCH 4/8 libndctl: Add support for parsing of_pmem dimm flags and monitor mode

In reply to Vaibhav Jain

Add support for parsing the dimm flags for of_pmem supporting dimms. The flag file is exported in sysfs as 'papr_flags' and its contents are space separated flags indicating the current state of the dimm. A newly introduced function parse_of_pmem_flags() reads the contents of this flag file and sets appropriate flag bits in 'struct ndctl_dimm.flags'. This function is called at the end of of_pmem probe function add_of_pmem_dimm().

Also we advertise support for monitor mode by allocating a file descriptor to the 'papr_flags' file and assigning it to 'struct ndctl_dimm.health_event_fd'.

---
 ndctl/lib/libndctl.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
ndctl/lib/libndctl.c +32 -1
index 650406d27512..7cc50afac404 100644
@@ -801,6 +801,28 @@ static void parse_nfit_mem_flags(struct ndctl_dimm *dimm, char *flags)
 				ndctl_dimm_get_devname(dimm), flags);
 }
 
+static void parse_of_pmem_flags(struct ndctl_dimm *dimm, char *flags)
+{
+	char *start, *end;
+
+	start = flags;
+	while ((end = strchr(start, ' '))) {
+		*end = '\0';
+		if (strcmp(start, "not_armed") == 0)
+			dimm->flags.f_arm = 1;
+		else if (strcmp(start, "save_fail") == 0)
+			dimm->flags.f_save = 1;
+		else if (strcmp(start, "flush_fail") == 0)
+			dimm->flags.f_flush = 1;
+		else if (strcmp(start, "smart_notify") == 0)
+			dimm->flags.f_notify = 1;
+		start = end + 1;
+	}
+	if (end != start)
+		dbg(ndctl_dimm_get_ctx(dimm), "%s: %s\n",
+				ndctl_dimm_get_devname(dimm), flags);
+}
+
 static void parse_dimm_flags(struct ndctl_dimm *dimm, char *flags)
 {
 	char *start, *end;
@@ -1436,8 +1458,17 @@ static int add_of_pmem_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
 	if (strcmp(buf, "ibm,pmemory") == 0) {
 		dimm->cmd_family = NVDIMM_FAMILY_PAPR_SCM;
 		rc = 0;
-		goto out;
+		goto out_monitor;
 	}
+
+out_monitor:
+	/* read the flags and also allocate the monitor mode event_fd */
+	sprintf(path, "%s/papr_flags", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) == 0)
+		parse_of_pmem_flags(dimm, buf);
+
+	/* Allocate monitor mode fd */
+	dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
 out:
 	free(path);
 	return rc;
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#5 lore raw

PATCH 5/8 libndctl,papr_scm: Add definitions for PAPR_SCM DSM commands

In reply to Vaibhav Jain

Pull the kernel definition of PAPR_SCM DSM command which is located in the kernel tree at Ref[1]. Also add an implementation of 'papr_scm_dimm_ops' in a new file named 'papr_scm.c'. For now only an implementation of 'dimm_ops.cmd_is_supported' is provided.

References:
[1]: arch/powerpc/include/uapi/asm/papr_scm_dsm.h

---
 ndctl/lib/Makefile.am    |   1 +
 ndctl/lib/papr_scm.c     |  34 ++++++++++
 ndctl/lib/papr_scm_dsm.h | 143 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 178 insertions(+)
 create mode 100644 ndctl/lib/papr_scm.c
 create mode 100644 ndctl/lib/papr_scm_dsm.h
ndctl/lib/Makefile.am +1 -0
index e4eb0060bca4..3943541e435d 100644
@@ -21,6 +21,7 @@ libndctl_la_SOURCES =\
 	hpe1.c \
 	msft.c \
 	hyperv.c \
+	papr_scm.c \
 	ars.c \
 	firmware.c \
 	libndctl.c
ndctl/lib/papr_scm.c new file +34 -0
new file mode 100644
index 000000000000..878698a5a8b4
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2020 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU Lesser General Public License,
+ * version 2.1, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT ANY
+ * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public License for
+ * more details.
+ */
+#include <stdint.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <endian.h>
+#include <util/log.h>
+#include <ndctl.h>
+#include <ndctl/libndctl.h>
+#include <lib/private.h>
+#include <papr_scm_dsm.h>
+
+static bool papr_cmd_is_supported(struct ndctl_dimm *dimm, int cmd)
+{
+	/* Handle this separately to support monitor mode */
+	if (cmd == ND_CMD_SMART)
+		return true;
+
+	return !!(dimm->cmd_mask & (1ULL << cmd));
+}
+
+struct ndctl_dimm_ops * const papr_scm_dimm_ops = &(struct ndctl_dimm_ops) {
+	.cmd_is_supported = papr_cmd_is_supported,
+};
ndctl/lib/papr_scm_dsm.h new file +143 -0

143 lines not on this page · raw message

Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#6 lore raw

PATCH 6/8 libndctl,papr_scm: Implement scaffolding to issue and handle DSM cmds

In reply to Vaibhav Jain

This patch implement necessary infrastructure inside 'papr_scm.c' to issue and handle DSM commands. Changed implemented are:

* Implement dimm initialization/un-initialization functions papr_dimm_init()/unint() to allocate a per-dimm 'struct dimm_priv' instance.

* New helper function allocate_cmd() to allocate command packages for a specific DSM command and payload size.

* New function update_dimm_state() to parse a given command payload and update per dimm 'struct dimm_priv'.

* Provide an implementation of 'dimm_ops->smart_get_flags' to send the submitted instance of 'struct ndctl_cmd' to update_dimm_state().

* Logging helpers for papr_scm that use the underlying libndctl provided logging.

---
 ndctl/lib/papr_scm.c | 174 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)
ndctl/lib/papr_scm.c +174 -0
index 878698a5a8b4..0a3857e2a4c4 100644
@@ -20,6 +20,29 @@
 #include <lib/private.h>
 #include <papr_scm_dsm.h>
 
+/* Utility logging maros for simplify logging */
+#define PAPR_DBG(_dimm_, _format_str_, ...) dbg(_dimm_->bus->ctx,	\
+					      "papr_scm:"#_format_str_,	\
+					      ##__VA_ARGS__)
+#define PAPR_INFO(_dimm_, _format_str_, ...) info(_dimm_->bus->ctx,	\
+						"papr_scm:"#_format_str_, \
+						##__VA_ARGS__)
+#define PAPR_ERR(_dimm_, _format_str_, ...) err(_dimm_->bus->ctx,	\
+					      "papr_scm:"#_format_str_,	\
+					      ##__VA_ARGS__)
+#define PAPR_NOTICE(_dimm_, _format_str_, ...) notice(_dimm_->bus->ctx,	\
+						    "papr_scm:"#_format_str_, \
+						    ##__VA_ARGS__)
+
+/* Command flags to indicate if a given command is parsed of not */
+#define CMD_PKG_SUBMITTED 1
+#define CMD_PKG_PARSED 2
+
+/* Per dimm data. Holds per-dimm data parsed from the cmd_pkgs */
+struct dimm_priv {
+	/* Empty for now */
+};
+
 static bool papr_cmd_is_supported(struct ndctl_dimm *dimm, int cmd)
 {
 	/* Handle this separately to support monitor mode */
@@ -29,6 +52,157 @@ static bool papr_cmd_is_supported(struct ndctl_dimm *dimm, int cmd)
 	return !!(dimm->cmd_mask & (1ULL << cmd));
 }
 
+static __u64 pcmd_to_dsm(const struct nd_papr_scm_cmd_pkg *pcmd)
+{
+	return pcmd->hdr.nd_command;
+}
+
+/* Verify if the given command is supported and valid */
+static bool cmd_is_valid(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
+{
+	const struct nd_papr_scm_cmd_pkg *pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
+
+	if (dimm == NULL)
+		return false;
+
+	if (cmd == NULL) {
+		PAPR_ERR(dimm, "Invalid command\n");
+		return false;
+	}
+
+	/* Verify the command family */
+	if (pcmd->hdr.nd_family != NVDIMM_FAMILY_PAPR_SCM) {
+		PAPR_ERR(dimm, "Invalid command family:0x%016llx\n",
+			 pcmd->hdr.nd_family);
+		return false;
+	}
+
+	/* Verify the DSM */
+	if (pcmd_to_dsm(pcmd) <= DSM_PAPR_SCM_MIN ||
+	    pcmd_to_dsm(pcmd) >= DSM_PAPR_SCM_MAX) {
+		PAPR_ERR(dimm, "Invalid command :0x%016llx\n",
+			 pcmd->hdr.nd_command);
+		return false;
+	}
+
+	return true;
+}
+
+/* Parse a command payload and update dimm flags/private data */
+static int update_dimm_stats(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
+{
+	const struct nd_papr_scm_cmd_pkg *pcmd;
+
+	if (!cmd_is_valid(dimm, cmd))
+		return -EINVAL;
+
+	/*
+	 * Silently prevent parsing of an already parsed ndctl_cmd else
+	 * mark the command as parsed.
+	 */
+	if (cmd->status >= CMD_PKG_PARSED) {
+		return 0;
+	} else if (cmd->status < 0) {
+		PAPR_ERR(dimm, "Command error %d\n", cmd->status);
+		return -ENXIO;
+	}
+
+	/* Mark the command as parsed */
+	cmd->status = CMD_PKG_PARSED;
+
+	/* Get the command dsm and handle it */
+	pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
+	switch (pcmd_to_dsm(pcmd)) {
+	default:
+		PAPR_ERR(dimm, "Unhandled dsm-command 0x%016llx\n",
+			 pcmd_to_dsm(pcmd));
+		return -ENOENT;
+	}
+}
+
+/* Allocate a struct ndctl_cmd for given dsm command with payload size */
+static struct ndctl_cmd *allocate_cmd(struct ndctl_dimm *dimm,
+				      __u64 dsm_cmd, size_t payload_size,
+				      uint16_t payload_version)
+{
+	struct ndctl_cmd *cmd;
+	struct nd_papr_scm_cmd_pkg *pcmd;
+	size_t size;
+
+	size = sizeof(struct ndctl_cmd) +
+		sizeof(struct nd_papr_scm_cmd_pkg) + payload_size;
+	cmd = calloc(1, size);
+	if (!cmd)
+		return NULL;
+	pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
+
+	ndctl_cmd_ref(cmd);
+	cmd->dimm = dimm;
+	cmd->type = ND_CMD_CALL;
+	cmd->size = size;
+	cmd->status = CMD_PKG_SUBMITTED;
+	cmd->firmware_status = (u32 *) &pcmd->cmd_status;
+
+	/* Populate the nd_cmd_pkg contained in nd_papr_scm_cmd_pkg */
+	pcmd->hdr.nd_family = NVDIMM_FAMILY_PAPR_SCM;
+	pcmd->hdr.nd_command = dsm_cmd;
+
+	pcmd->payload_version = payload_version;
+	pcmd->payload_offset = sizeof(struct nd_papr_scm_cmd_pkg);
+
+	/* Keep payload size empty. To be populated by called */
+	pcmd->hdr.nd_fw_size = 0;
+	pcmd->hdr.nd_size_out = 0;
+	pcmd->hdr.nd_size_in = 0;
+
+	return cmd;
+}
+
+static unsigned int papr_smart_get_flags(struct ndctl_cmd *cmd)
+{
+	/* In case of error return empty flags * */
+	if (update_dimm_stats(cmd->dimm, cmd))
+		return 0;
+
+	/* Return empty flags for now as no DSM support */
+	return 0;
+}
+
+static int papr_dimm_init(struct ndctl_dimm *dimm)
+{
+	struct dimm_priv *p;
+
+	if (dimm->dimm_user_data) {
+		PAPR_DBG(dimm, "Dimm already initialized !!\n");
+		return 0;
+	}
+
+	p = calloc(1, sizeof(struct dimm_priv));
+	if (!p) {
+		PAPR_ERR(dimm, "Unable to allocate memory for dimm-private\n");
+		return -1;
+	}
+
+	dimm->dimm_user_data = p;
+	return 0;
+}
+
+static void papr_dimm_uninit(struct ndctl_dimm *dimm)
+{
+	struct dimm_priv *p = dimm->dimm_user_data;
+
+	if (!p) {
+		PAPR_DBG(dimm, "Dimm already un-initialized !!\n");
+		return;
+	}
+
+	dimm->dimm_user_data = NULL;
+	free(p);
+}
+
 struct ndctl_dimm_ops * const papr_scm_dimm_ops = &(struct ndctl_dimm_ops) {
 	.cmd_is_supported = papr_cmd_is_supported,
+	.dimm_init = papr_dimm_init,
+	.dimm_uninit = papr_dimm_uninit,
+	.smart_get_flags = papr_smart_get_flags,
 };
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#7 lore raw

PATCH 7/8 libndctl,papr_scm: Implement support for DSM_PAPR_SCM_HEALTH

In reply to Vaibhav Jain

Add support for reporting DIMM health by issuing DSM_PAPR_SCM_HEALTH DSM. It returns an instance of '
struct nd_papr_scm_dimm_health_stat' as defined in 'papr_scm_dsm.h'. The patch provides support for dimm-ops 'new_smart' & 'smart_get_health' as papr_new_smart_health() & papr_smart_get_health() respectively. This callbacks should enable ndctl to report DIMM health.

Also a new member 'struct dimm_priv.health' is introduced which holds the current health status of the dimm. This member is set inside newly added function 'update_dimm_health_v1()' which parses the v1 payload returned by the kernel after servicing DSM_PAPR_SCM_HEALTH. The function will also update dimm-flags viz 'struct ndctl_dimm.flags.f_*' based on the flags set in the returned payload.

---
 ndctl/lib/papr_scm.c | 80 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 77 insertions(+), 3 deletions(-)
ndctl/lib/papr_scm.c +77 -3
index 0a3857e2a4c4..a01649d3a9fe 100644
@@ -40,7 +40,9 @@
 
 /* Per dimm data. Holds per-dimm data parsed from the cmd_pkgs */
 struct dimm_priv {
-	/* Empty for now */
+
+	/* Cache the dimm health status */
+	struct nd_papr_scm_dimm_health_stat health;
 };
 
 static bool papr_cmd_is_supported(struct ndctl_dimm *dimm, int cmd)
@@ -88,6 +90,43 @@ static bool cmd_is_valid(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
 	return true;
 }
 
+/*
+ * Parse the nd_papr_scm_dimm_health_stat_v1 payload embedded in ndctl_cmd and
+ * update dimm health/flags
+ */
+static int update_dimm_health_v1(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
+{
+	struct nd_papr_scm_cmd_pkg *pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
+	struct dimm_priv *p = dimm->dimm_user_data;
+	const struct nd_papr_scm_dimm_health_stat_v1 *health =
+		papr_scm_pcmd_to_payload(pcmd);
+
+	/* Update the dimm flags */
+	dimm->flags.f_arm = health->dimm_unarmed;
+	dimm->flags.f_flush = health->dimm_bad_shutdown;
+	dimm->flags.f_restore = health->dimm_bad_restore;
+	dimm->flags.f_smart = (health->dimm_health != 0);
+
+	/* Cache the dimm health information */
+	memcpy(&p->health, health, sizeof(*health));
+	return 0;
+}
+
+/* Check payload version returned and pass the packet to appropriate handler */
+static int update_dimm_health(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
+{
+	const struct nd_papr_scm_cmd_pkg *pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
+
+	if (pcmd->payload_version == 1)
+		return update_dimm_health_v1(dimm, cmd);
+
+	/* unknown version */
+	PAPR_ERR(dimm, "Unknown payload version for dimm_health."
+		 "Ver=%d, Supported=%d\n", pcmd->payload_version,
+		 ND_PAPR_SCM_DIMM_HEALTH_VERSION);
+	return -EINVAL;
+}
+
 /* Parse a command payload and update dimm flags/private data */
 static int update_dimm_stats(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
 {
@@ -113,6 +152,8 @@ static int update_dimm_stats(struct ndctl_dimm *dimm, struct ndctl_cmd *cmd)
 	/* Get the command dsm and handle it */
 	pcmd = nd_to_papr_cmd_pkg(cmd->pkg);
 	switch (pcmd_to_dsm(pcmd)) {
+	case DSM_PAPR_SCM_HEALTH:
+		return update_dimm_health(dimm, cmd);
 	default:
 		PAPR_ERR(dimm, "Unhandled dsm-command 0x%016llx\n",
 			 pcmd_to_dsm(pcmd));
@@ -158,14 +199,45 @@ static struct ndctl_cmd *allocate_cmd(struct ndctl_dimm *dimm,
 	return cmd;
 }
 
+static struct ndctl_cmd *papr_new_smart_health(struct ndctl_dimm *dimm)
+{
+	struct ndctl_cmd *cmd_ret;
+
+	cmd_ret = allocate_cmd(dimm, DSM_PAPR_SCM_HEALTH,
+			       sizeof(struct nd_papr_scm_dimm_health_stat),
+			       ND_PAPR_SCM_DIMM_HEALTH_VERSION);
+	if (!cmd_ret) {
+		PAPR_ERR(dimm, "Unable to allocate smart_health command\n");
+		return NULL;
+	}
+
+	cmd_ret->pkg[0].nd_size_out = ND_PAPR_SCM_ENVELOPE_CONTENT_SIZE(
+		struct nd_papr_scm_dimm_health_stat);
+
+	return cmd_ret;
+}
+
+static unsigned int papr_smart_get_health(struct ndctl_cmd *cmd)
+{
+	struct dimm_priv *p = cmd->dimm->dimm_user_data;
+
+	/*
+	 * Update the dimm stats and use some math to return one of
+	 * defined ND_SMART_*_HEALTH values
+	 */
+	if (update_dimm_stats(cmd->dimm, cmd) || !p->health.dimm_health)
+		return 0;
+	else
+		return 1 << (p->health.dimm_health - 1);
+}
+
 static unsigned int papr_smart_get_flags(struct ndctl_cmd *cmd)
 {
 	/* In case of error return empty flags * */
 	if (update_dimm_stats(cmd->dimm, cmd))
 		return 0;
 
-	/* Return empty flags for now as no DSM support */
-	return 0;
+	return ND_SMART_HEALTH_VALID;
 }
 
 static int papr_dimm_init(struct ndctl_dimm *dimm)
@@ -205,4 +277,6 @@ struct ndctl_dimm_ops * const papr_scm_dimm_ops = &(struct ndctl_dimm_ops) {
 	.dimm_init = papr_dimm_init,
 	.dimm_uninit = papr_dimm_uninit,
 	.smart_get_flags = papr_smart_get_flags,
+	.new_smart = papr_new_smart_health,
+	.smart_get_health = papr_smart_get_health,
 };
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
#8 lore raw

PATCH 8/8 libndctl,papr_scm: Add support for reporting bad shutdown

In reply to Vaibhav Jain

Provide support for dimm-op 'smart_get_shutdown_state' implemented as papr_smart_get_shutdown_state() to report a bad shutdown that couldn't flush contents of nvdimm to flash memory properly.

---
 ndctl/lib/papr_scm.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
ndctl/lib/papr_scm.c +11 -1
index a01649d3a9fe..8a6fec992aff 100644
@@ -231,13 +231,22 @@ static unsigned int papr_smart_get_health(struct ndctl_cmd *cmd)
 		return 1 << (p->health.dimm_health - 1);
 }
 
+static unsigned int papr_smart_get_shutdown_state(struct ndctl_cmd *cmd)
+{
+	struct dimm_priv *p = cmd->dimm->dimm_user_data;
+
+	/* Update dimm state and return f_flush */
+	return update_dimm_stats(cmd->dimm, cmd) ?
+		0 : p->health.dimm_bad_shutdown;
+}
+
 static unsigned int papr_smart_get_flags(struct ndctl_cmd *cmd)
 {
 	/* In case of error return empty flags * */
 	if (update_dimm_stats(cmd->dimm, cmd))
 		return 0;
 
-	return ND_SMART_HEALTH_VALID;
+	return ND_SMART_HEALTH_VALID | ND_SMART_SHUTDOWN_VALID;
 }
 
 static int papr_dimm_init(struct ndctl_dimm *dimm)
@@ -279,4 +288,5 @@ struct ndctl_dimm_ops * const papr_scm_dimm_ops = &(struct ndctl_dimm_ops) {
 	.smart_get_flags = papr_smart_get_flags,
 	.new_smart = papr_new_smart_health,
 	.smart_get_health = papr_smart_get_health,
+	.smart_get_shutdown_state = papr_smart_get_shutdown_state,
 };
Signature · 4 lines
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- [email protected]
To unsubscribe send an email to [email protected]