iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
PATCH 1/1 iio: adc: ti-tlc4541: Use new structure for SPI transfer delays
In a recent change to the SPI subsystem [1], a new delay struct was added to replace the delay_usecs. This change replaces the current delay_usecs with delay for this driver.
The spi_transfer_delay_exec() function [in the SPI framework] makes sure that both delay_usecs & delay are used (in this order to preserve backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce delay field for spi_transfer + spi_transfer_delay_exec()")
--- drivers/iio/adc/ti-tlc4541.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/adc/ti-tlc4541.c +2 -1
@@ -189,7 +189,8 @@ static int tlc4541_probe(struct spi_device *spi)/* Setup default message */ st->scan_single_xfer[0 ].rx_buf = &st->rx_buf[0 ]; st->scan_single_xfer[0 ].len =3 ; - st->scan_single_xfer[1 ].delay_usecs =3 ; + st->scan_single_xfer[1 ].delay.value =3 ; + st->scan_single_xfer[1 ].delay.unit =SPI_DELAY_UNIT_NSECS ; st->scan_single_xfer[2 ].rx_buf = &st->rx_buf[0 ]; st->scan_single_xfer[2 ].len =2 ;
Signature · 1 line
2.17.1
Quoted 4 lines · On Thu, 27 Feb 2020 14:34:27 +0200 Sergiu Cuciurean…
In a recent change to the SPI subsystem [1], a new
delaystruct was added to replace thedelay_usecs. This change replaces the currentdelay_usecswithdelayfor this driver.
Quoted 8 lines
The
spi_transfer_delay_exec()function [in the SPI framework] makes sure that bothdelay_usecs&delayare used (in this order to preserve backwards compatibility).[1] commit
bebcfd272df6("spi: introducedelayfield forspi_transfer+spi_transfer_delay_exec()")Signed-off-by Sergiu Cuciurean <[email protected]>
applied.
Thanks,
Jonathan
Quoted 18 lines
--- drivers/iio/adc/ti-tlc4541.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/iio/adc/ti-tlc4541.c +2
-1@@ -189,7 +189,8 @@ static int tlc4541_probe(struct spi_device *spi)/* Setup default message */ st->scan_single_xfer[0 ].rx_buf = &st->rx_buf[0 ]; st->scan_single_xfer[0 ].len =3 ; - st->scan_single_xfer[1 ].delay_usecs =3 ; + st->scan_single_xfer[1 ].delay.value =3 ; + st->scan_single_xfer[1 ].delay.unit =SPI_DELAY_UNIT_NSECS ; st->scan_single_xfer[2 ].rx_buf = &st->rx_buf[0 ]; st->scan_single_xfer[2 ].len =2 ;