Skip to contentSkip to conversation

kbuild: Remove debug info from kallsyms linking

PATCH Applied Kees Cook 2 participants 2 messages Mar 4, 2020

Subsystems (2)
lore
Share & tools
lore

Kees Cook

author
#0 lore raw

PATCH v2 1/1 kbuild: Remove debug info from kallsyms linking

When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend time collecting and writing the dwarf sections to the temporary output files. kallsyms does not need this information, and leaving it off halves their linking time. This is especially noticeable without CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still need those details.

Refactor the BTF and kallsyms generation stages slightly for more regularized temporary names. Skip debug during kallsyms links. Additionally move "info BTF" to the correct place since commit 8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct reporting"), which added "info LD ..." to vmlinux_link calls.

For a full debug info build with BTF, my link time goes from 1m06s to 0m54s, saving about 12 seconds, or 18%.

---
v2: add Ack, clarify "info BTF" relocation

---
 scripts/link-vmlinux.sh | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)
scripts/link-vmlinux.sh +19 -9
index dd484e92752e..ac569e197bfa 100755
@@ -63,12 +63,18 @@ vmlinux_link()
 	local lds="${objtree}/${KBUILD_LDS}"
 	local output=${1}
 	local objects
+	local strip_debug
 
 	info LD ${output}
 
 	# skip output file argument
 	shift
 
+	# The kallsyms linking does not need debug symbols included.
+	if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
+		strip_debug=-Wl,--strip-debug
+	fi
+
 	if [ "${SRCARCH}" != "um" ]; then
 		objects="--whole-archive			\
 			${KBUILD_VMLINUX_OBJS}			\
@@ -79,6 +85,7 @@ vmlinux_link()
 			${@}"
 
 		${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux}	\
+			${strip_debug#-Wl,}			\
 			-o ${output}				\
 			-T ${lds} ${objects}
 	else
@@ -91,6 +98,7 @@ vmlinux_link()
 			${@}"
 
 		${CC} ${CFLAGS_vmlinux}				\
+			${strip_debug}				\
 			-o ${output}				\
 			-Wl,-T,${lds}				\
 			${objects}				\
@@ -106,6 +114,8 @@ gen_btf()
 {
 	local pahole_ver
 	local bin_arch
+	local bin_format
+	local bin_file
 
 	if ! [ -x "$(command -v ${PAHOLE})" ]; then
 		echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available"
@@ -118,8 +128,9 @@ gen_btf()
 		return 1
 	fi
 
-	info "BTF" ${2}
 	vmlinux_link ${1}
+
+	info "BTF" ${2}
 	LLVM_OBJCOPY=${OBJCOPY} ${PAHOLE} -J ${1}
 
 	# dump .BTF section into raw binary file to link with final vmlinux
@@ -127,11 +138,12 @@ gen_btf()
 		cut -d, -f1 | cut -d' ' -f2)
 	bin_format=$(LANG=C ${OBJDUMP} -f ${1} | grep 'file format' | \
 		awk '{print $4}')
+	bin_file=.btf.vmlinux.bin
 	${OBJCOPY} --change-section-address .BTF=0 \
 		--set-section-flags .BTF=alloc -O binary \
-		--only-section=.BTF ${1} .btf.vmlinux.bin
+		--only-section=.BTF ${1} $bin_file
 	${OBJCOPY} -I binary -O ${bin_format} -B ${bin_arch} \
-		--rename-section .data=.BTF .btf.vmlinux.bin ${2}
+		--rename-section .data=.BTF $bin_file ${2}
 }
 
 # Create ${2} .o file with all symbols from the ${1} object file
@@ -166,8 +178,8 @@ kallsyms()
 kallsyms_step()
 {
 	kallsymso_prev=${kallsymso}
-	kallsymso=.tmp_kallsyms${1}.o
-	kallsyms_vmlinux=.tmp_vmlinux${1}
+	kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1}
+	kallsymso=${kallsyms_vmlinux}.o
 
 	vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
 	kallsyms ${kallsyms_vmlinux} ${kallsymso}
@@ -190,7 +202,6 @@ cleanup()
 {
 	rm -f .btf.*
 	rm -f .tmp_System.map
-	rm -f .tmp_kallsyms*
 	rm -f .tmp_vmlinux*
 	rm -f System.map
 	rm -f vmlinux
@@ -257,9 +268,8 @@ tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' |
 
 btf_vmlinux_bin_o=""
 if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
-	if gen_btf .tmp_vmlinux.btf .btf.vmlinux.bin.o ; then
-		btf_vmlinux_bin_o=.btf.vmlinux.bin.o
-	else
+	btf_vmlinux_bin_o=.btf.vmlinux.bin.o
+	if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then
 		echo >&2 "Failed to generate BTF for vmlinux"
 		echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
 		exit 1
Signature · 5 lines
2.20.1


-- 
Kees Cook
maintainer Applied
#1 lore raw
Quoted 13 lines · Kees Cook

When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend time collecting and writing the dwarf sections to the temporary output files. kallsyms does not need this information, and leaving it off halves their linking time. This is especially noticeable without CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still need those details.

Refactor the BTF and kallsyms generation stages slightly for more regularized temporary names. Skip debug during kallsyms links. Additionally move "info BTF" to the correct place since commit 8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct reporting"), which added "info LD ..." to vmlinux_link calls.

Quoted 5 lines

For a full debug info build with BTF, my link time goes from 1m06s to 0m54s, saving about 12 seconds, or 18%.

Applied, thanks!