qcow2: Implement zstd cluster compression method
PATCH v5 1/5 block/qcow2-threads: fix qcow2_decompress
In reply to Denis PlotnikovFrom: Vladimir Sementsov-Ogievskiy <[email protected]>
On success path we return what inflate() returns instead of 0. And it most probably works for Z_STREAM_END as it is positive, but is definitely broken for Z_BUF_ERROR.
While being here, switch to errno return code, to be closer to qcow2_compress API (and usual expectations).
Revert condition in if to be more positive. Drop dead initialization of ret.
--- block/qcow2-threads.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
block/qcow2-threads.c +7 -5
@@ -128,12 +128,12 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,* @src - source buffer, @src_size bytes * * Returns: 0 on success -* -1 on fail +* -EIO on fail */ static ssize_t qcow2_decompress (void *dest,size_t dest_size,const void *src,size_t src_size) { -int ret =0 ; +int ret;z_stream strm;memset (&strm,0 ,sizeof (strm));
@@ -144,17 +144,19 @@ static ssize_t qcow2_decompress(void *dest, size_t dest_size, ret =inflateInit2 (&strm,-12 );if (ret !=Z_OK ) { -return -1 ; +return -EIO ; } ret =inflate (&strm,Z_FINISH ); -if ((ret !=Z_STREAM_END && ret !=Z_BUF_ERROR ) || strm.avail_out !=0 ) { +if ((ret ==Z_STREAM_END || ret ==Z_BUF_ERROR ) && strm.avail_out ==0 ) {/* * We approve Z_BUF_ERROR because we need @dest buffer to be filled, but * @src buffer may be processed partly (because in qcow2 we know size of * compressed data with precision of one sector) */ - ret =-1 ; + ret =0 ; + }else { + ret = -EIO ; }inflateEnd (&strm);
Signature · 1 line
2.17.0
v5 cover qcow2: Implement zstd cluster compression method
v5:
* replace -ENOTSUP with abort in qcow2_co_decompress [Vladimir]
* set cluster size for all test cases in the beginning of the 287 test
v4:
* the series is rebased on top of 01 "block/qcow2-threads: fix qcow2_decompress"
* 01 is just a no-change resend to avoid extra dependencies. Still, it may be merged in separate
v3:
* remove redundant max compression type value check [Vladimir, Eric] (the switch below checks everything)
* prevent compression type changing on "qemu-img amend" [Vladimir]
* remove zstd config setting, since it has been added already by "migration" patches [Vladimir]
* change the compression type error message [Vladimir]
* fix alignment and 80-chars exceeding [Vladimir]
v2:
* rework compression type setting [Vladimir]
* squash iotest changes to the compression type introduction patch [Vladimir, Eric]
* fix zstd availability checking in zstd iotest [Vladimir]
* remove unnecessry casting [Eric]
* remove rudundant checks [Eric]
* fix compressed cluster layout in qcow2 spec [Vladimir]
* fix wording [Eric, Vladimir]
* fix compression type filtering in iotests [Eric]
v1:
the initial series
Denis Plotnikov (4):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression
iotests: 287: add qcow2 compression type test
Vladimir Sementsov-Ogievskiy (1):
block/qcow2-threads: fix qcow2_decompress
docs/interop/qcow2.txt | 20 +++ configure | 2 +- qapi/block-core.json | 23 +++- block/qcow2.h | 18 ++- include/block/block_int.h | 1 + block/qcow2-threads.c | 206 ++++++++++++++++++++++++++++--- block/qcow2.c | 108 ++++++++++++++++ tests/qemu-iotests/031.out | 14 +-- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 +++++++-------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++--- tests/qemu-iotests/065 | 28 +++-- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 + tests/qemu-iotests/255.out | 8 +- tests/qemu-iotests/287 | 128 +++++++++++++++++++ tests/qemu-iotests/287.out | 43 +++++++ tests/qemu-iotests/common.filter | 3 +- tests/qemu-iotests/group | 1 + 22 files changed, 644 insertions(+), 113 deletions(-) create mode 100755 tests/qemu-iotests/287 create mode 100644 tests/qemu-iotests/287.out
Signature · 1 line
2.17.0
PATCH v5 3/5 qcow2: rework the cluster compression routine
The patch enables processing the image compression type defined for the image and chooses an appropriate method for image clusters (de)compression.
--- block/qcow2-threads.c | 71 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 60 insertions(+), 11 deletions(-)
block/qcow2-threads.c +60 -11
@@ -74,7 +74,9 @@ typedef struct Qcow2CompressData { } Qcow2CompressData;/* -* qcow2_compress() +* qcow2_zlib_compress() +* +* Compress @src_size bytes of data using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes
@@ -83,8 +85,8 @@ typedef struct Qcow2CompressData {* -ENOMEM destination buffer is not enough to store compressed data * -EIO on any other error */ -static ssize_t qcow2_compress (void *dest,size_t dest_size, -const void *src,size_t src_size) +static ssize_t qcow2_zlib_compress (void *dest,size_t dest_size, +const void *src,size_t src_size) {ssize_t ret;z_stream strm;
@@ -119,10 +121,10 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size, }/* -* qcow2_decompress() +* qcow2_zlib_decompress() * * Decompress some data (not more than @src_size bytes) to produce exactly -* @dest_size bytes. +* @dest_size bytes using zlib compression method * * @dest - destination buffer, @dest_size bytes * @src - source buffer, @src_size bytes
@@ -130,8 +132,8 @@ static ssize_t qcow2_compress(void *dest, size_t dest_size,* Returns: 0 on success * -EIO on fail */ -static ssize_t qcow2_decompress (void *dest,size_t dest_size, -const void *src,size_t src_size) +static ssize_t qcow2_zlib_decompress (void *dest,size_t dest_size, +const void *src,size_t src_size) {int ret;z_stream strm;
@@ -191,20 +193,67 @@ qcow2_co_do_compress(BlockDriverState *bs, void *dest, size_t dest_size,return arg.ret; } +/* +* qcow2_co_compress() +* +* Compress @src_size bytes of data using the compression +* method defined by the image compression type +* +* @dest - destination buffer, @dest_size bytes +* @src - source buffer, @src_size bytes +* +* Returns: compressed size on success +* a negative error code on failure +*/ ssize_t coroutine_fnqcow2_co_compress (BlockDriverState *bs,void *dest,size_t dest_size,const void *src,size_t src_size) { -return qcow2_co_do_compress (bs, dest, dest_size, src, src_size, - qcow2_compress); +BDRVQcow2State *s = bs->opaque; +Qcow2CompressFunc fn; + +switch (s->compression_type) { +case QCOW2_COMPRESSION_TYPE_ZLIB : + fn = qcow2_zlib_compress; +break ; + +default : +abort (); + } + +return qcow2_co_do_compress (bs, dest, dest_size, src, src_size, fn); } +/* +* qcow2_co_decompress() +* +* Decompress some data (not more than @src_size bytes) to produce exactly +* @dest_size bytes using the compression method defined by the image +* compression type +* +* @dest - destination buffer, @dest_size bytes +* @src - source buffer, @src_size bytes +* +* Returns: 0 on success +* a negative error code on failure +*/ ssize_t coroutine_fnqcow2_co_decompress (BlockDriverState *bs,void *dest,size_t dest_size,const void *src,size_t src_size) { -return qcow2_co_do_compress (bs, dest, dest_size, src, src_size, - qcow2_decompress); +BDRVQcow2State *s = bs->opaque; +Qcow2CompressFunc fn; + +switch (s->compression_type) { +case QCOW2_COMPRESSION_TYPE_ZLIB : + fn = qcow2_zlib_decompress; +break ; + +default : +abort (); + } + +return qcow2_co_do_compress (bs, dest, dest_size, src, src_size, fn); }
Signature · 1 line
2.17.0
PATCH v5 4/5 qcow2: add zstd cluster compression
In reply to Denis Plotnikovzstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G
QAPI part:
--- docs/interop/qcow2.txt | 20 +++++++ configure | 2 +- qapi/block-core.json | 3 +- block/qcow2-threads.c | 123 +++++++++++++++++++++++++++++++++++++++++ block/qcow2.c | 7 +++ 5 files changed, 153 insertions(+), 2 deletions(-)
docs/interop/qcow2.txt +20 -0
@@ -208,6 +208,7 @@ version 2. Available compression type values: 0: zlib <https://www.zlib.net/> + 1: zstd <http://github.com/facebook/zstd> === Header padding ===
@@ -575,11 +576,30 @@ Compressed Clusters Descriptor (x = 62 - (cluster_bits - 8)): Another compressed cluster may map to the tail of the final sector used by this compressed cluster. + The layout of the compressed data depends on the compression + type used for the image (see compressed cluster layout). + If a cluster is unallocated, read requests shall read the data from the backing file (except if bit 0 in the Standard Cluster Descriptor is set). If there is no backing file or the backing file is smaller than the image, they shall read zeros for all parts that are not covered by the backing file. +=== Compressed Cluster Layout === + +The compressed cluster data has a layout depending on the compression +type used for the image, as follows: + +Compressed data layout for the available compression types: +data_space_lenght - data chunk length available to store a compressed cluster. +(for more details see "Compressed Clusters Descriptor") +x = data_space_length - 1 + + 0: (default) zlib <http://zlib.net/>: + Byte 0 - x: the compressed data content + all the space provided used for compressed data + 1: zstd <http://github.com/facebook/zstd>: + Byte 0 - 3: the length of compressed data in bytes + 4 - x: the compressed data content == Snapshots ==
configure +1 -1
@@ -1835,7 +1835,7 @@ disabled with --disable-FEATURE, default is enabled if available: lzfse support of lzfse compression library (for reading lzfse-compressed dmg images) zstd support for zstd compression library - (for migration compression) + (for migration compression and qcow2 cluster compression) seccomp seccomp support coroutine-pool coroutine freelist (better performance) glusterfs GlusterFS backend
qapi/block-core.json +2 -1
@@ -4401,11 +4401,12 @@ # Compression type used in qcow2 image file # # @zlib: zlib compression, see <http://zlib.net/> +# @zstd: zstd compression, see <http://github.com/facebook/zstd> # # Since: 5.0 ## { 'enum': 'Qcow2CompressionType', - 'data': [ 'zlib' ] } + 'data': [ 'zlib', { 'name': 'zstd', 'if': 'defined(CONFIG_ZSTD)' } ] } ## # @BlockdevCreateOptionsQcow2:
block/qcow2-threads.c +123 -0
147 lines not on this page · raw message
block/qcow2.c +7 -0
@@ -1246,6 +1246,9 @@ static int validate_compression_type(BDRVQcow2State *s, Error **errp) {switch (s->compression_type) {case QCOW2_COMPRESSION_TYPE_ZLIB : +#ifdef CONFIG_ZSTD +case QCOW2_COMPRESSION_TYPE_ZSTD : +#endif break ;default :
@@ -3455,6 +3458,10 @@ qcow2_co_create(BlockdevCreateOptions *create_options, Error **errp) }switch (qcow2_opts->compression_type) { +#ifdef CONFIG_ZSTD +case QCOW2_COMPRESSION_TYPE_ZSTD : +break ; +#endif default :error_setg (errp,"Unknown compression type" ); goto out;
Signature · 1 line
2.17.0
PATCH v5 5/5 iotests: 287: add qcow2 compression type test
In reply to Denis PlotnikovThe test checks fulfilling qcow2 requiriements for the compression type feature and zstd compression type operability.
--- tests/qemu-iotests/287 | 128 +++++++++++++++++++++++++++++++++++++ tests/qemu-iotests/287.out | 43 +++++++++++++ tests/qemu-iotests/group | 1 + 3 files changed, 172 insertions(+) create mode 100755 tests/qemu-iotests/287 create mode 100644 tests/qemu-iotests/287.out
tests/qemu-iotests/287 new file +128 -0
@@ -0,0 +1,128 @@ +#!/usr/bin/env bash +# +# Test case for an image using zstd compression +# +# Copyright (c) 2020 Virtuozzo International GmbH +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +# creator [email protected] + +seq="$(basename $0)" +echo "QA output created by $seq" + +status=1 # failure is the default! + +_cleanup() +{ + _cleanup_test_img +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# standard environment +. ./common.rc +. ./common.filter + +# This tests qocw2-specific low-level functionality +_supported_fmt qcow2 +_supported_proto file +_supported_os Linux + +# for all the cases +CLUSTER_SIZE=65536 + +# Check if we can run this test. + +IMGOPTS='compression_type=zstd' _make_test_img 64M | grep "Invalid parameter 'zstd'" 2>&1 1>/dev/null + +ZSTD_SUPPORTED=$? + +if (($ZSTD_SUPPORTED==0)); then + _notrun "ZSTD is disabled" +fi + +# Test: when compression is zlib the incompatible bit is unset +echo +echo "=== Testing compression type incompatible bit setting for zlib ===" +echo + +IMGOPTS='compression_type=zlib' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +# Test: when compression differs from zlib the incompatible bit is set +echo +echo "=== Testing compression type incompatible bit setting for zstd ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features + +# Test: an image can't be openned if compression type is zlib and +# incompatible feature compression type is set +echo +echo "=== Testing zlib with incompatible bit set ===" +echo + +IMGOPTS='compression_type=zlib' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" set-feature-bit incompatible 3 +# to make sure the bit was actually set +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null +if (($?==0)); then + echo "Error: The image openned successfully. The image must not be openned" +fi + +# Test: an image can't be openned if compression type is NOT zlib and +# incompatible feature compression type is UNSET +echo +echo "=== Testing zstd with incompatible bit unset ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$PYTHON qcow2.py "$TEST_IMG" set-header incompatible_features 0 +# to make sure the bit was actually unset +$PYTHON qcow2.py "$TEST_IMG" dump-header | grep incompatible_features +$QEMU_IMG info "$TEST_IMG" 2>1 1>/dev/null +if (($?==0)); then + echo "Error: The image openned successfully. The image must not be openned" +fi +# Test: check compression type values +echo +echo "=== Testing compression type values ===" +echo +# zlib=0 +IMGOPTS='compression_type=zlib' _make_test_img 64M +od -j104 -N1 -An -vtu1 "$TEST_IMG" + +# zstd=1 +IMGOPTS='compression_type=zstd' _make_test_img 64M +od -j104 -N1 -An -vtu1 "$TEST_IMG" + +# Test: using zstd compression, write to and read from an image +echo +echo "=== Testing reading and writing with zstd ===" +echo + +IMGOPTS='compression_type=zstd' _make_test_img 64M +$QEMU_IO -c "write -c -P 0xAC 65536 64k " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -P 0xAC 65536 65536 " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -v 131070 8 " "$TEST_IMG" | _filter_qemu_io +$QEMU_IO -c "read -v 65534 8" "$TEST_IMG" | _filter_qemu_io + +# success, all done +echo "*** done" +rm -f $seq.full +status=0
tests/qemu-iotests/287.out new file +43 -0
43 lines not on this page · raw message
tests/qemu-iotests/group +1 -0
@@ -293,3 +293,4 @@ 283 auto quick 284 rw 286 rw quick +287 auto quick
Signature · 1 line
2.17.0
PATCH v5 2/5 qcow2: introduce compression type feature
In reply to Denis PlotnikovThe patch adds some preparation parts for incompatible compression type feature to qcow2 allowing the use different compression methods for image clusters (de)compressing.
It is implied that the compression type is set on the image creation and can be changed only later by image conversion, thus compression type defines the only compression algorithm used for the image, and thus, for all image clusters.
The goal of the feature is to add support of other compression methods to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the compression type is reported on image creation and there are some changes in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for all the tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feture compression type
backing_file_offset += 56 (8 + 48 -> header_change + fature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 144, 182, 242, 255--- qapi/block-core.json | 22 ++++++- block/qcow2.h | 18 +++++- include/block/block_int.h | 1 + block/qcow2.c | 101 ++++++++++++++++++++++++++++++ tests/qemu-iotests/031.out | 14 ++--- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 +++++++++++++++---------------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++++++----- tests/qemu-iotests/065 | 28 ++++++--- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 ++ tests/qemu-iotests/255.out | 8 +-- tests/qemu-iotests/common.filter | 3 +- 16 files changed, 253 insertions(+), 96 deletions(-)
qapi/block-core.json +20 -2
@@ -78,6 +78,8 @@ # # @bitmaps: A list of qcow2 bitmap details (since 4.0) # +# @compression-type: the image cluster compression method (since 5.0) +# # Since: 1.7 ## { 'struct': 'ImageInfoSpecificQCow2',
@@ -89,7 +91,8 @@ '*corrupt': 'bool', 'refcount-bits': 'int', '*encrypt': 'ImageInfoSpecificQCow2Encryption', - '*bitmaps': ['Qcow2BitmapInfo'] + '*bitmaps': ['Qcow2BitmapInfo'], + 'compression-type': 'Qcow2CompressionType' } } ##
@@ -4392,6 +4395,18 @@ 'data': [ 'v2', 'v3' ] } +## +# @Qcow2CompressionType: +# +# Compression type used in qcow2 image file +# +# @zlib: zlib compression, see <http://zlib.net/> +# +# Since: 5.0 +## +{ 'enum': 'Qcow2CompressionType', + 'data': [ 'zlib' ] } + ## # @BlockdevCreateOptionsQcow2: #
@@ -4415,6 +4430,8 @@ # allowed values: off, falloc, full, metadata) # @lazy-refcounts: True if refcounts may be updated lazily (default: off) # @refcount-bits: Width of reference counts in bits (default: 16) +# @compression-type: The image cluster compression method +# (default: zlib, since 5.0) # # Since: 2.12 ##
@@ -4430,7 +4447,8 @@ '*cluster-size': 'size', '*preallocation': 'PreallocMode', '*lazy-refcounts': 'bool', - '*refcount-bits': 'int' } } + '*refcount-bits': 'int', + '*compression-type':'Qcow2CompressionType' } } ## # @BlockdevCreateOptionsQed:
block/qcow2.h +17 -1
@@ -146,6 +146,12 @@ typedef struct QCowHeader {uint32_t refcount_order;uint32_t header_length; + +/* Additional fields */ +uint8_t compression_type; + +/* header must be a multiple of 8 */ +uint8_t padding[7 ]; }QEMU_PACKED QCowHeader; typedef struct QEMU_PACKED QCowSnapshotHeader {
@@ -216,13 +222,16 @@ enum {QCOW2_INCOMPAT_DIRTY_BITNR =0 ,QCOW2_INCOMPAT_CORRUPT_BITNR =1 ,QCOW2_INCOMPAT_DATA_FILE_BITNR =2 , +QCOW2_INCOMPAT_COMPRESSION_BITNR =3 ,QCOW2_INCOMPAT_DIRTY =1 <<QCOW2_INCOMPAT_DIRTY_BITNR ,QCOW2_INCOMPAT_CORRUPT =1 <<QCOW2_INCOMPAT_CORRUPT_BITNR ,QCOW2_INCOMPAT_DATA_FILE =1 <<QCOW2_INCOMPAT_DATA_FILE_BITNR , +QCOW2_INCOMPAT_COMPRESSION =1 <<QCOW2_INCOMPAT_COMPRESSION_BITNR ,QCOW2_INCOMPAT_MASK =QCOW2_INCOMPAT_DIRTY |QCOW2_INCOMPAT_CORRUPT - | QCOW2_INCOMPAT_DATA_FILE, + |QCOW2_INCOMPAT_DATA_FILE + | QCOW2_INCOMPAT_COMPRESSION, };/* Compatible feature bits */
@@ -369,6 +378,13 @@ typedef struct BDRVQcow2State {bool metadata_preallocation_checked;bool metadata_preallocation; +/* +* Compression type used for the image. Default: 0 - ZLIB +* The image compression type is set on image creation. +* The only way to change the compression type is to convert the image +* with the desired compression type set +*/ +Qcow2CompressionType compression_type; } BDRVQcow2State; typedef struct Qcow2COWRegion {
include/block/block_int.h +1 -0
@@ -57,6 +57,7 @@#define BLOCK_OPT_REFCOUNT_BITS "refcount_bits"#define BLOCK_OPT_DATA_FILE "data_file"#define BLOCK_OPT_DATA_FILE_RAW "data_file_raw" +#define BLOCK_OPT_COMPRESSION_TYPE "compression_type"#define BLOCK_PROBE_BUF_SIZE 512
block/qcow2.c +101 -0
179 lines not on this page · raw message
tests/qemu-iotests/031.out +7 -7
@@ -113,11 +113,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension:
@@ -146,11 +146,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension:
@@ -164,7 +164,7 @@ No errors were found on the image. magic 0x514649fb version 3 -backing_file_offset 0x178 +backing_file_offset 0x1b0 backing_file_size 0x17 cluster_bits 16 size 67108864
@@ -179,7 +179,7 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0xe2792aca
@@ -188,7 +188,7 @@ data 'host_device' Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> Header extension:
tests/qemu-iotests/036.out +2 -2
@@ -26,7 +26,7 @@ compatible_features [] autoclear_features [63] Header extension: magic 0x6803f857 -length 192 +length 240 data <binary>
@@ -38,7 +38,7 @@ compatible_features [] autoclear_features [] Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> *** done
tests/qemu-iotests/049.out +51 -51
225 lines not on this page · raw message
tests/qemu-iotests/060.out +1 -0
@@ -17,6 +17,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: true
tests/qemu-iotests/061.out +20 -14
@@ -22,11 +22,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb
@@ -80,11 +80,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb
@@ -136,11 +136,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> ERROR cluster 5 refcount=0 reference=1
@@ -191,11 +191,11 @@ incompatible_features [] compatible_features [42] autoclear_features [42] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> magic 0x514649fb
@@ -260,11 +260,11 @@ incompatible_features [] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> read 65536/65536 bytes at offset 44040192
@@ -294,11 +294,11 @@ incompatible_features [0] compatible_features [0] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> ERROR cluster 5 refcount=0 reference=1
@@ -323,11 +323,11 @@ incompatible_features [] compatible_features [] autoclear_features [] refcount_order 4 -header_length 104 +header_length 112 Header extension: magic 0x6803f857 -length 192 +length 240 data <binary> read 131072/131072 bytes at offset 0
@@ -491,6 +491,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data
@@ -511,6 +512,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: foo
@@ -524,6 +526,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file raw: false
@@ -538,6 +541,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data
@@ -550,6 +554,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data
@@ -563,6 +568,7 @@ virtual size: 64 MiB (67108864 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 data file: TEST_DIR/t.IMGFMT.data
tests/qemu-iotests/065 +18 -10
@@ -88,24 +88,30 @@ class TestQMP(TestImageInfoSpecific): class TestQCow2(TestQemuImgInfo): '''Testing a qcow2 version 2 image''' img_options = 'compat=0.10' - json_compare = { 'compat': '0.10', 'refcount-bits': 16 } - human_compare = [ 'compat: 0.10', 'refcount bits: 16' ] + json_compare = { 'compat': '0.10', 'refcount-bits': 16, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 0.10', 'compression type: zlib', + 'refcount bits: 16' ] class TestQCow3NotLazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts disabled''' img_options = 'compat=1.1,lazy_refcounts=off' json_compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: false', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: false', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3Lazy(TestQemuImgInfo): '''Testing a qcow2 version 3 image with lazy refcounts enabled''' img_options = 'compat=1.1,lazy_refcounts=on' json_compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } - human_compare = [ 'compat: 1.1', 'lazy refcounts: true', - 'refcount bits: 16', 'corrupt: false' ] + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } + human_compare = [ 'compat: 1.1', 'compression type: zlib', + 'lazy refcounts: true', 'refcount bits: 16', + 'corrupt: false' ] class TestQCow3NotLazyQMP(TestQMP): '''Testing a qcow2 version 3 image with lazy refcounts disabled, opening
@@ -113,7 +119,8 @@ class TestQCow3NotLazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=off' qemu_options = 'lazy-refcounts=on' compare = { 'compat': '1.1', 'lazy-refcounts': False, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } class TestQCow3LazyQMP(TestQMP):
@@ -122,7 +129,8 @@ class TestQCow3LazyQMP(TestQMP): img_options = 'compat=1.1,lazy_refcounts=on' qemu_options = 'lazy-refcounts=off' compare = { 'compat': '1.1', 'lazy-refcounts': True, - 'refcount-bits': 16, 'corrupt': False } + 'refcount-bits': 16, 'corrupt': False, + 'compression-type': 'zlib' } TestImageInfoSpecific = None TestQemuImgInfo = None
tests/qemu-iotests/080 +1 -1
@@ -45,7 +45,7 @@ _supported_os Linux # - This is generally a test for compat=1.1 images _unsupported_imgopts 'refcount_bits=1[^0-9]' data_file 'compat=0.10' -header_size=104 +header_size=112 offset_backing_file_offset=8 offset_backing_file_size=16
tests/qemu-iotests/144.out +2 -2
@@ -9,7 +9,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=536870912 { 'execute': 'qmp_capabilities' } {"return": {}} { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} === Performing block-commit on active layer ===
@@ -31,6 +31,6 @@ Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/ === Performing Live Snapshot 2 === { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp2.IMGFMT', 'format': 'IMGFMT' } } -Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} *** done
tests/qemu-iotests/182.out +1 -1
@@ -13,7 +13,7 @@ Is another process using the image [TEST_DIR/t.qcow2]? {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node0', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}} {'execute': 'blockdev-snapshot-sync', 'arguments': { 'node-name': 'node0', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'snapshot-node-name': 'node1' } } -Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib {"return": {}} {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node1', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } } {"return": {}}
tests/qemu-iotests/242.out +5 -0
@@ -12,6 +12,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false refcount bits: 16 corrupt: false
@@ -32,6 +33,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]:
@@ -64,6 +66,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]:
@@ -104,6 +107,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]:
@@ -153,6 +157,7 @@ virtual size: 1 MiB (1048576 bytes) cluster_size: 65536 Format specific information: compat: 1.1 + compression type: zlib lazy refcounts: false bitmaps: [0]:
tests/qemu-iotests/255.out +4 -4
@@ -3,9 +3,9 @@ Finishing a commit job with background reads === Create backing chain and start VM === -Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib === Start background read requests ===
@@ -23,9 +23,9 @@ Closing the VM while a job is being cancelled === Create images and start VM === -Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib -Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 +Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16 compression_type=zlib wrote 1048576/1048576 bytes at offset 0 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/common.filter +2 -1
@@ -152,7 +152,8 @@ _filter_img_create() -e "s# refcount_bits=[0-9]\\+##g" \ -e "s# key-secret=[a-zA-Z0-9]\\+##g" \ -e "s# iter-time=[0-9]\\+##g" \ - -e "s# force_size=\\(on\\|off\\)##g" + -e "s# force_size=\\(on\\|off\\)##g" \ + -e "s# compression_type=[a-zA-Z0-9]\\+##g" } _filter_img_info()
Signature · 1 line
2.17.0
Re: [PATCH v5 2/5] qcow2: introduce compression type feature
Quoted 103 lines · Denis Plotnikov
The patch adds some preparation parts for incompatible compression type feature to qcow2 allowing the use different compression methods for image clusters (de)compressing.
It is implied that the compression type is set on the image creation and can be changed only later by image conversion, thus compression type defines the only compression algorithm used for the image, and thus, for all image clusters.
The goal of the feature is to add support of other compression methods to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the compression type is reported on image creation and there are some changes in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for all the tests * fix header size, feature table size and backing file offset affected tests: 031, 036, 061, 080 header_size +=8: 1 byte compression type 7 bytes padding feature_table += 48: incompatible feture compression type backing_file_offset += 56 (8 + 48 -> header_change + fature_table_change) * add "compression type" for test output matching when it isn't filtered affected tests: 049, 060, 061, 065, 144, 182, 242, 255Signed-off-by Denis Plotnikov <[email protected]>Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>--- qapi/block-core.json | 22 ++++++- block/qcow2.h | 18 +++++- include/block/block_int.h | 1 + block/qcow2.c | 101 ++++++++++++++++++++++++++++++ tests/qemu-iotests/031.out | 14 ++--- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 +++++++++++++++---------------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++++++----- tests/qemu-iotests/065 | 28 ++++++--- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 ++ tests/qemu-iotests/255.out | 8 +-- tests/qemu-iotests/common.filter | 3 +- 16 files changed, 253 insertions(+), 96 deletions(-)qapi/block-core.json +18
-1@@ -78,6 +78,8 @@ # # @bitmaps: A list of qcow2 bitmap details (since 4.0) # +# @compression-type: the image cluster compression method (since 5.0) +# # Since: 1.7 ## { 'struct': 'ImageInfoSpecificQCow2',@@ -89,7 +91,8 @@ '*corrupt': 'bool', 'refcount-bits': 'int', '*encrypt': 'ImageInfoSpecificQCow2Encryption', - '*bitmaps': ['Qcow2BitmapInfo'] + '*bitmaps': ['Qcow2BitmapInfo'], + 'compression-type': 'Qcow2CompressionType' } } ##@@ -4392,6 +4395,18 @@ 'data': [ 'v2', 'v3' ] } +## +# @Qcow2CompressionType: +# +# Compression type used in qcow2 image file +# +# @zlib: zlib compression, see <http://zlib.net/> +# +# Since: 5.0 +## +{ 'enum': 'Qcow2CompressionType', + 'data': [ 'zlib' ] } + ## # @BlockdevCreateOptionsQcow2: #@@ -4415,6 +4430,8 @@ # allowed values: off, falloc, full, metadata) # @lazy-refcounts: True if refcounts may be updated lazily (default: off) # @refcount-bits: Width of reference counts in bits (default: 16) +# @compression-type: The image cluster compression method +# (default: zlib, since 5.0) # # Since: 2.12 ##
qapi/block-core.json line 4454
Quoted 9 lines
qapi/block-core.json +2
-1@@ -4430,7 +4447,8 @@ '*cluster-size': 'size', '*preallocation': 'PreallocMode', '*lazy-refcounts': 'bool', - '*refcount-bits': 'int' } } + '*refcount-bits': 'int', + '*compression-type':'Qcow2CompressionType' } } ## # @BlockdevCreateOptionsQed:
[...]
QAPI part:
Re: [PATCH v5 4/5] qcow2: add zstd cluster compression
In reply to Denis PlotnikovQuoted 29 lines · Denis Plotnikov
zstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2GThe test was conducted with brd disk to reduce the influence of disk subsystem to the test results.
The results is given in seconds.compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.imgcompression decompression
zlib zstd zlib zstd
------------------------------------------------------------real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0
Quoted 7 lines
Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G
Signed-off-by Denis Plotnikov <[email protected]>QAPI part:
Looks a bit like I've reviewed only QAPI part, when actually my r-b is for full patch...
May be
Signature · 2 lines
Best regards, Vladimir
Re: [PATCH v5 4/5] qcow2: add zstd cluster compression
Quoted 38 lines · Vladimir Sementsov-Ogievskiy
Quoted 29 lines · Denis Plotnikov
zstd significantly reduces cluster compression time. It provides better compression performance maintaining the same level of the compression ratio in comparison with zlib, which, at the moment, is the only compression method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2GThe test was conducted with brd disk to reduce the influence of disk subsystem to the test results.
The results is given in seconds.compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.imgcompression decompression
zlib zstd zlib zstd
------------------------------------------------------------real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %) user 65.0 15.8 5.3 2.5 sys 3.3 0.2 2.0 2.0Quoted 7 lines
Both ZLIB and ZSTD gave the same compression ratio: 1.57 compressed image size in both cases: 1.4G
Signed-off-by Denis Plotnikov <[email protected]>QAPI part:
Quoted 7 lines
Looks a bit like I've reviewed only QAPI part, when actually my r-b is for full patch...
May be
[QAPI part]Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>
No objection.
We habitually use
I'm okay with that, too.
Re: [PATCH v5 2/5] qcow2: introduce compression type feature
In reply to Denis Plotnikovqapi/block-core.json line 4399
Quoted 2 lines · Denis Plotnikov
qapi/block-core.json +2
-0+## +# @Qcow2CompressionType:
I realized that we have a bit of a mix in the way we write this type of identifiers between QCow2FooBar (capital C) and Qcow2FooBar ... what's the recommended one?
block/qcow2.h typedef struct QCowHeader { · line 155
Quoted 11 lines
block/qcow2.h +6
-0@@ -146,6 +146,12 @@ typedef struct QCowHeader {uint32_t refcount_order;uint32_t header_length; + +/* Additional fields */ +uint8_t compression_type; + +/* header must be a multiple of 8 */ +uint8_t padding[7 ]; }QEMU_PACKED QCowHeader;
Is it worth adding a static assertion here ?
Berto
Re: [PATCH v5 3/5] qcow2: rework the cluster compression routine
In reply to Denis PlotnikovQuoted 6 lines · Denis Plotnikov
The patch enables processing the image compression type defined for the image and chooses an appropriate method for image clusters (de)compression.
Signed-off-by Denis Plotnikov <[email protected]>Reviewed-by Vladimir Sementsov-Ogievskiy <[email protected]>
Berto
Re: [PATCH v5 4/5] qcow2: add zstd cluster compression
In reply to Denis Plotnikovblock/qcow2-threads.c static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, · line 176
Quoted 3 lines · Denis Plotnikov
block/qcow2-threads.c +3
-0+#ifdef CONFIG_ZSTD + +#define ZSTD_LEN_BUF 4
I think it's worth adding a comment explaining what this is. I know it's quite clear once you read the code, but still...
Quoted 35 lines
block/qcow2-threads.c +35
-0+/* +* qcow2_zstd_decompress() +* +* Decompress some data (not more than @src_size bytes) to produce exactly +* @dest_size bytes using zstd compression method +* +* @dest - destination buffer, @dest_size bytes +* @src - source buffer, @src_size bytes +* +* Returns: 0 on success +* -EIO on any error +*/ +static ssize_t qcow2_zstd_decompress (void *dest,size_t dest_size, +const void *src,size_t src_size) +{ +/* +* zstd decompress wants to know the exact length of the data. +* For that purpose, on compression, the length is stored in +* the very beginning of the compressed buffer +*/ +size_t s_size; +const char *s_buf = ((const char *) src) +ZSTD_LEN_BUF ; + +/* +* sanity check that we can read 4 byte the content length and +* and there is some content to decompress +*/ +if (src_size <=ZSTD_LEN_BUF ) { +return -EIO ; + } + + s_size =ldl_be_p (src); + +/* sanity check that the buffer is big enough to read the content from */ +if (src_size -ZSTD_LEN_BUF < s_size) {
block/qcow2-threads.c static ssize_t qcow2_zlib_decompress(void *dest, size_t dest_size, · line 279
Quoted 10 lines
block/qcow2-threads.c +10
-0+return -EIO ; + } + +if (ZSTD_isError ( +ZSTD_decompress (dest, dest_size, s_buf, s_size))) { +return -EIO ; + } + +return 0 ; +}
In this one you could also return -ENOMEM if the destination buffer is not big enough.
But not of my comments is so important, so whether you decide to make those changes or not,
Berto
ping!
Is there any other comments/concerns/objections/suggestions according to the series except the minor ones from Alberto and Vladimir? If not, please, let me know, so I can resend the series with the minor changes for applying to the corresponding branch.
Thanks!
Denis
Quoted 65 lines · Denis Plotnikov
v5:
* replace-ENOTSUPwith abort inqcow2_co_decompress[Vladimir]
* set cluster size for all test cases in the beginning of the 287 testv4:
* the series is rebased on top of 01 "block/qcow2-threads: fixqcow2_decompress"
* 01 is just a no-change resend to avoid extra dependencies. Still, it may be merged in separatev3:
* remove redundant max compression type value check [Vladimir, Eric] (the switch below checks everything)
* prevent compression type changing on "qemu-img amend" [Vladimir]
* remove zstd config setting, since it has been added already by "migration" patches [Vladimir]
* change the compression type error message [Vladimir]
* fix alignment and 80-chars exceeding [Vladimir]v2:
* rework compression type setting [Vladimir]
* squash iotest changes to the compression type introduction patch [Vladimir, Eric]
* fix zstd availability checking in zstd iotest [Vladimir]
* remove unnecessry casting [Eric]
* remove rudundant checks [Eric]
* fix compressed cluster layout in qcow2 spec [Vladimir]
* fix wording [Eric, Vladimir]
* fix compression type filtering in iotests [Eric]v1:
the initial seriesDenis Plotnikov (4):
qcow2: introduce compression type feature
qcow2: rework the cluster compression routine
qcow2: add zstd cluster compression
iotests: 287: add qcow2 compression type testVladimir Sementsov-Ogievskiy (1):
block/qcow2-threads: fixqcow2_decompressdocs/interop/qcow2.txt | 20 +++ configure | 2 +- qapi/block-core.json | 23 +++- block/qcow2.h | 18 ++- include/block/block_int.h | 1 + block/qcow2-threads.c | 206 ++++++++++++++++++++++++++++--- block/qcow2.c | 108 ++++++++++++++++ tests/qemu-iotests/031.out | 14 +-- tests/qemu-iotests/036.out | 4 +- tests/qemu-iotests/049.out | 102 +++++++-------- tests/qemu-iotests/060.out | 1 + tests/qemu-iotests/061.out | 34 ++--- tests/qemu-iotests/065 | 28 +++-- tests/qemu-iotests/080 | 2 +- tests/qemu-iotests/144.out | 4 +- tests/qemu-iotests/182.out | 2 +- tests/qemu-iotests/242.out | 5 + tests/qemu-iotests/255.out | 8 +- tests/qemu-iotests/287 | 128 +++++++++++++++++++ tests/qemu-iotests/287.out | 43 +++++++ tests/qemu-iotests/common.filter | 3 +- tests/qemu-iotests/group | 1 + 22 files changed, 644 insertions(+), 113 deletions(-)create mode 100755 tests/qemu-iotests/287
create mode 100644 tests/qemu-iotests/287.out
Quoted 16 lines · Max Reitz
Quoted 6 lines · Denis Plotnikov
ping!
Is there any other comments/concerns/objections/suggestions according to the series except the minor ones from Alberto and Vladimir? If not, please, let me know, so I can resend the series with the minor changes for applying to the corresponding branch.
Sounds good to me.
I’d like to note that most iotests that seem to do something with compression (i.e., where grep finds a 'compress' somewhere; 013, 014, 023, 042, 046, 053, 055, ...) pass with -o compression_type=zstd, too. 060 hangs somewhere. 112 complains about v2 incompatibility; and 214 relies on intricacies of zlib, I think. So that looks good, too.
Quoted 5 lines
Well, one thing I did have to fix for this to work is to quote everything in common.pattern that tries to echo something with brackets (e.g. “Clusters to be compressed [1]”). I don’t quite know why the brackets suddenly disappear when I run the tests with -o
compression_type, who knows.
That sounds like you have a file named '1' in the directory where the echo was run. Unquoted [1] is a shell glob that expands to '1' if that file exists, otherwise remains unexpanded as '[1]'.
Quoted 2 lines
But putting quotes around the echo
arguments fixes it, so...
Yes. Figuring out why a file named '1' is being created is also a useful exercise, but quoting any time you have [ that you want output is already a good idea.
Signature · 3 lines
Eric Blake, Principal Software Engineer Red Hat, Inc. +1-919-301-3226 Virtualization: qemu.org | libvirt.org