4.4.216-stable review
Subsystems (4)
Greg Kroah-Hartman
maintainercover 4.4.216-stable review
This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.216-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.216-rc1
yangerkun <[email protected]>
crypto: algif_skcipher - use ZERO_OR_NULL_PTR in skcipher_recvmsg_async
Mikulas Patocka <[email protected]>
dm cache: fix a crash due to incorrect work item cancelling
Desnes A. Nunes do Rosario <[email protected]>
powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
Dan Carpenter <[email protected]>
dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()
Dan Carpenter <[email protected]>
hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
Ahmad Fatoum <[email protected]>
ARM: imx: build v7_cpu_resume() unconditionally
Jason Gunthorpe <[email protected]>
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
Bernard Metzler <[email protected]>
RDMA/iwcm: Fix iwcm work deallocation
Charles Keepax <[email protected]>
ASoC: dapm: Correct DAPM handling of active widgets during shutdown
Matthias Reichl <[email protected]>
ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
Takashi Iwai <[email protected]>
ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output
Dmitry Osipenko <[email protected]>
dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list
Dmitry Osipenko <[email protected]>
dmaengine: tegra-apb: Fix use-after-free
Jiri Slaby <[email protected]>
vt: selection, push sel_lock up
Jiri Slaby <[email protected]>
vt: selection, push console lock down
Jiri Slaby <[email protected]>
vt: selection, close sel_buffer race
OGAWA Hirofumi <[email protected]>
fat: fix uninit-memory access for partial initialized inode
Zhang Xiaoxu <[email protected]>
vgacon: Fix a UAF in vgacon_invert_region
Eugeniu Rosca <[email protected]>
usb: core: port: do error out if usb_autopm_get_interface() fails
Eugeniu Rosca <[email protected]>
usb: core: hub: do error out if usb_autopm_get_interface() fails
Dan Lazewatsky <[email protected]>
usb: quirks: add NO_LPM quirk for Logitech Screen Share
Jim Lin <[email protected]>
usb: storage: Add quirk for Samsung Fit flash
Ronnie Sahlberg <[email protected]>
cifs: don't leak -EAGAIN for stat() during reconnect
Vasily Averin <[email protected]>
s390/cio: cio_ignore_proc_seq_next should increase position index
Marco Felsch <[email protected]>
watchdog: da9062: do not ping the hw during stop()
Marek Vasut <[email protected]>
net: ks8851-ml: Fix 16-bit IO operation
Marek Vasut <[email protected]>
net: ks8851-ml: Fix 16-bit data access
Marek Vasut <[email protected]>
net: ks8851-ml: Remove 8-bit bus accessors
Harigovindan P <[email protected]>
drm/msm/dsi: save pll state before dsi host is powered off
John Stultz <[email protected]>
drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
Sergey Organov <[email protected]>
usb: gadget: serial: fix Tx stall after buffer overflow
Lars-Peter Clausen <[email protected]>
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
Daniel Golle <[email protected]>
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
Paul Moore <[email protected]>
audit: always check the netlink payload length in audit_receive_msg()
Matthew Wilcox <[email protected]>
fs: prevent page refcount overflow in pipe_buf_get
Miklos Szeredi <[email protected]>
pipe: add pipe_buf_get() helper
Linus Torvalds <[email protected]>
mm: prevent get_user_pages() from overflowing page refcount
Punit Agrawal <[email protected]>
mm, gup: ensure real head page is ref-counted when using hugepages
Will Deacon <[email protected]>
mm, gup: remove broken VM_BUG_ON_PAGE compound check for hugepages
Linus Torvalds <[email protected]>
mm: add 'try_get_page()' helper function
Linus Torvalds <[email protected]>
mm: make page ref count overflow check tighter and more explicit
yangerkun <[email protected]>
slip: stop double free sl->dev in slip_open
Sean Christopherson <[email protected]>
KVM: Check for a bad hva before dropping into the ghc slow path
Aleksa Sarai <[email protected]>
namei: only return -ECHILD from follow_dotdot_rcu()
Nikolay Aleksandrov <[email protected]>
net: netlink: cap max groups which will be considered in netlink_bind()
Chris Wilson <[email protected]>
include/linux/bitops.h: introduce BITS_PER_TYPE
Nathan Chancellor <[email protected]>
ecryptfs: Fix up bad backport of fe2e082f5da5b4a0a92ae32978f81507ef37ec66
Wolfram Sang <[email protected]>
i2c: jz4780: silence log flood on txabrt
Christophe JAILLET <[email protected]>
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
[email protected] <[email protected]>
HID: hiddev: Fix race in in hiddev_disconnect()
Johan Korsnes <[email protected]>
HID: core: increase HID report buffer size to 8KiB
Johan Korsnes <[email protected]>
HID: core: fix off-by-one memset in hid_report_raw_event()
Paul Moore <[email protected]>
audit: fix error handling in audit_data_to_entry()
Dan Carpenter <[email protected]>
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
Jason Baron <[email protected]>
net: sched: correct flower port blocking
Dmitry Osipenko <[email protected]>
nfc: pn544: Fix occasional HW initialization failure
Xin Long <[email protected]>
sctp: move the format error check out of __sctp_sf_do_9_1_abort
Benjamin Poirier <[email protected]>
ipv6: Fix route replacement with dev-only route
Benjamin Poirier <[email protected]>
ipv6: Fix nlmsg_flags when splitting a multipath route
Arun Parameswaran <[email protected]>
net: phy: restore mdio regs in the iproc mdio driver
Jethro Beekman <[email protected]>
net: fib_rules: Correctly set table field when table number exceeds 8 bits
Petr Mladek <[email protected]>
sysrq: Remove duplicated sysrq message
Petr Mladek <[email protected]>
sysrq: Restore original console_loglevel when sysrq disabled
Sergey Matyukevich <[email protected]>
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
Frank Sorenson <[email protected]>
cifs: Fix mode output in debugging statements
Sergey Matyukevich <[email protected]>
cfg80211: check wiphy driver existence for drvinfo report
Johannes Berg <[email protected]>
mac80211: consider more elements in parsing CRC
Corey Minyard <[email protected]>
ipmi:ssif: Handle a possible NULL pointer reference
Suraj Jitindar Singh <[email protected]>
ext4: fix potential race between s_group_info online resizing and access
Suraj Jitindar Singh <[email protected]>
ext4: fix potential race between s_flex_groups online resizing and access
Theodore Ts'o <[email protected]>
ext4: fix potential race between online resizing and write operations
Johannes Berg <[email protected]>
iwlwifi: pcie: fix rb_allocator workqueue allocation
-------------
Diffstat:
Makefile | 4 +- arch/arm/mach-imx/Makefile | 2 + arch/arm/mach-imx/common.h | 4 +- arch/arm/mach-imx/resume-imx6.S | 24 +++++++ arch/arm/mach-imx/suspend-imx6.S | 14 ----- arch/mips/kernel/vpe.c | 2 +- arch/powerpc/kernel/cputable.c | 4 +- arch/s390/mm/gup.c | 6 +- arch/x86/mm/gup.c | 9 ++- crypto/algif_skcipher.c | 2 +- drivers/char/ipmi/ipmi_ssif.c | 10 ++- drivers/dma/coh901318.c | 4 -- drivers/dma/tegra20-apb-dma.c | 6 +- drivers/gpu/drm/msm/dsi/dsi_manager.c | 7 ++- drivers/hid/hid-core.c | 4 +- drivers/hid/usbhid/hiddev.c | 2 +- drivers/hwmon/adt7462.c | 2 +- drivers/i2c/busses/i2c-jz4780.c | 36 +---------- drivers/infiniband/core/cm.c | 1 + drivers/infiniband/core/iwcm.c | 4 +- drivers/md/dm-cache-target.c | 4 +- drivers/net/ethernet/micrel/ks8851_mll.c | 53 +++------------- drivers/net/phy/mdio-bcm-iproc.c | 20 ++++++ drivers/net/slip/slip.c | 1 - drivers/net/wireless/iwlwifi/pcie/rx.c | 6 +- drivers/nfc/pn544/i2c.c | 1 + drivers/s390/cio/blacklist.c | 5 +- drivers/tty/serial/ar933x_uart.c | 8 +++ drivers/tty/sysrq.c | 8 +-- drivers/tty/vt/selection.c | 24 ++++++- drivers/tty/vt/vt.c | 2 - drivers/usb/core/hub.c | 6 +- drivers/usb/core/port.c | 10 ++- drivers/usb/core/quirks.c | 3 + drivers/usb/gadget/function/f_fs.c | 5 +- drivers/usb/gadget/function/u_serial.c | 4 +- drivers/usb/storage/unusual_devs.h | 6 ++ drivers/video/console/vgacon.c | 3 + drivers/watchdog/da9062_wdt.c | 7 --- fs/cifs/cifsacl.c | 4 +- fs/cifs/connect.c | 2 +- fs/cifs/inode.c | 8 ++- fs/ecryptfs/keystore.c | 4 +- fs/ext4/balloc.c | 14 ++++- fs/ext4/ext4.h | 30 +++++++-- fs/ext4/ialloc.c | 23 ++++--- fs/ext4/mballoc.c | 61 ++++++++++++------ fs/ext4/resize.c | 62 +++++++++++++++---- fs/ext4/super.c | 103 +++++++++++++++++++++---------- fs/fat/inode.c | 19 +++--- fs/fuse/dev.c | 12 ++-- fs/namei.c | 2 +- fs/pipe.c | 4 +- fs/splice.c | 12 +++- include/linux/bitops.h | 3 +- include/linux/hid.h | 2 +- include/linux/mm.h | 23 ++++++- include/linux/pipe_fs_i.h | 17 ++++- include/net/flow_dissector.h | 9 +++ kernel/audit.c | 40 ++++++------ kernel/auditfilter.c | 71 +++++++++++---------- kernel/trace/trace.c | 6 +- mm/gup.c | 51 ++++++++++----- mm/hugetlb.c | 16 ++++- mm/internal.h | 28 ++++++++- net/core/fib_rules.c | 2 +- net/ipv6/ip6_fib.c | 7 ++- net/ipv6/route.c | 1 + net/mac80211/util.c | 18 ++++-- net/netlink/af_netlink.c | 5 +- net/sched/cls_flower.c | 1 + net/sctp/sm_statefuns.c | 27 +++++--- net/wireless/ethtool.c | 8 ++- net/wireless/nl80211.c | 1 + sound/soc/codecs/pcm512x.c | 8 ++- sound/soc/soc-dapm.c | 2 +- sound/soc/soc-pcm.c | 16 ++--- virt/kvm/kvm_main.c | 12 ++-- 78 files changed, 684 insertions(+), 373 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/72 iwlwifi: pcie: fix rb_allocator workqueue allocation
From: Johannes Berg <[email protected]>
commit 8188a18ee2e48c9a7461139838048363bfce3fef upstream
We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case.
--- drivers/net/wireless/iwlwifi/pcie/rx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/wireless/iwlwifi/pcie/rx.c +5 -1
@@ -708,9 +708,13 @@ int iwl_pcie_rx_init(struct iwl_trans *trans)if (err)return err; } -if (!rba->alloc_wq) +if (!rba->alloc_wq) { rba->alloc_wq =alloc_workqueue ("rb_allocator" ,WQ_HIGHPRI |WQ_UNBOUND ,1 ); +if (!rba->alloc_wq) +return -ENOMEM ; + } +INIT_WORK (&rba->rx_alloc, iwl_pcie_rx_allocator_work);cancel_work_sync (&rba->rx_alloc);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 2/72 ext4: fix potential race between online resizing and write operations
In reply to Greg Kroah-HartmanFrom: Theodore Ts'o <[email protected]>
commit 1d0c3924a92e69bfa91163bda83c12a994b4d106 upstream.
During an online resize an array of pointers to buffer heads gets replaced so it can get enlarged. If there is a racing block allocation or deallocation which uses the old array, and the old array has gotten reused this can lead to a GPF or some other random kernel memory getting modified.
--- fs/ext4/balloc.c | 14 +++++++++--- fs/ext4/ext4.h | 20 +++++++++++++++++- fs/ext4/resize.c | 55 ++++++++++++++++++++++++++++++++++++++---------- fs/ext4/super.c | 31 +++++++++++++++++++-------- 4 files changed, 96 insertions(+), 24 deletions(-)
fs/ext4/balloc.c +11 -3
@@ -279,6 +279,7 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb,ext4_group_t ngroups =ext4_get_groups_count (sb);struct ext4_group_desc *desc;struct ext4_sb_info *sbi =EXT4_SB (sb); +struct buffer_head *bh_p;if (block_group >= ngroups) { ext4_error(sb, "block_group >= groups_count - block_group = %u,"
@@ -289,7 +290,14 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb, group_desc = block_group >>EXT4_DESC_PER_BLOCK_BITS (sb); offset = block_group & (EXT4_DESC_PER_BLOCK (sb) -1 ); -if (!sbi->s_group_desc[group_desc]) { + bh_p =sbi_array_rcu_deref (sbi, s_group_desc, group_desc); +/* +* sbi_array_rcu_deref returns with rcu unlocked, this is ok since +* the pointer being dereferenced won't be dereferenced again. By +* looking at the usage in add_new_gdb() the value isn't modified, +* just the pointer, and so it remains valid. +*/ +if (!bh_p) {ext4_error (sb,"Group descriptor not loaded - " "block_group = %u, group_desc = %u, desc = %u" , block_group, group_desc, offset);
@@ -297,10 +305,10 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb, } desc = (struct ext4_group_desc *)( - (__u8 *)sbi->s_group_desc[group_desc]->b_data + + (__u8 *)bh_p->b_data + offset *EXT4_DESC_SIZE (sb));if (bh) - *bh = sbi->s_group_desc[group_desc]; + *bh = bh_p;return desc; }
fs/ext4/ext4.h +19 -1
@@ -1303,7 +1303,7 @@ struct ext4_sb_info {loff_t s_bitmap_maxbytes;/* max bytes for bitmap files */ struct buffer_head * s_sbh;/* Buffer containing the super block */ struct ext4_super_block *s_es;/* Pointer to the super block in the buffer */ -struct buffer_head **s_group_desc; +struct buffer_head *__rcu *s_group_desc;unsigned int s_mount_opt;unsigned int s_mount_opt2;unsigned int s_mount_flags;
@@ -1491,6 +1491,23 @@ static inline void ext4_inode_aio_set(struct inode *inode, ext4_io_end_t *io) inode->i_private = io; } +/* +* Returns: sbi->field[index] +* Used to access an array element from the following sbi fields which require +* rcu protection to avoid dereferencing an invalid pointer due to reassignment +* - s_group_desc +* - s_group_info +* - s_flex_group +*/ +#define sbi_array_rcu_deref (sbi, field, index) \ +({ \ + typeof(*((sbi)->field)) _v; \ + rcu_read_lock(); \ + _v = ((typeof(_v)*)rcu_dereference((sbi)->field))[index]; \ + rcu_read_unlock(); \ + _v; \ +}) +/* * Inode dynamic state flags */
@@ -2555,6 +2572,7 @@ extern int ext4_generic_delete_entry(handle_t *handle,extern int ext4_empty_dir (struct inode *inode);/* resize.c */ +extern void ext4_kvfree_array_rcu (void *to_free);extern int ext4_group_add (struct super_block *sb,struct ext4_new_group_data *input); extern int ext4_group_extend(struct super_block *sb,
fs/ext4/resize.c +44 -11
110 lines not on this page · raw message
fs/ext4/super.c +22 -9
@@ -794,6 +794,7 @@ static void ext4_put_super(struct super_block *sb) {struct ext4_sb_info *sbi =EXT4_SB (sb);struct ext4_super_block *es = sbi->s_es; +struct buffer_head **group_desc;int aborted =0 ;int i, err;
@@ -826,9 +827,12 @@ static void ext4_put_super(struct super_block *sb)if (!(sb->s_flags &MS_RDONLY ))ext4_commit_super (sb,1 ); +rcu_read_lock (); + group_desc =rcu_dereference (sbi->s_group_desc);for (i =0 ; i < sbi->s_gdb_count; i++) -brelse (sbi->s_group_desc[i]); -kvfree (sbi->s_group_desc); +brelse (group_desc[i]); +kvfree (group_desc); +rcu_read_unlock ();kvfree (sbi->s_flex_groups);percpu_counter_destroy (&sbi->s_freeclusters_counter);percpu_counter_destroy (&sbi->s_freeinodes_counter);
@@ -3236,7 +3240,7 @@ static void ext4_set_resv_clusters(struct super_block *sb)static int ext4_fill_super (struct super_block *sb,void *data,int silent) {char *orig_data =kstrdup (data,GFP_KERNEL ); -struct buffer_head *bh; +struct buffer_head *bh, **group_desc;struct ext4_super_block *es =NULL ;struct ext4_sb_info *sbi =kzalloc (sizeof (*sbi),GFP_KERNEL );ext4_fsblk_t block;
@@ -3795,9 +3799,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount; } } - sbi->s_group_desc =ext4_kvmalloc (db_count * +rcu_assign_pointer (sbi->s_group_desc, +ext4_kvmalloc (db_count *sizeof (struct buffer_head *), -GFP_KERNEL ); +GFP_KERNEL ));if (sbi->s_group_desc ==NULL ) {ext4_msg (sb,KERN_ERR ,"not enough memory" ); ret = -ENOMEM ;
@@ -3807,14 +3812,19 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)bgl_lock_init (sbi->s_blockgroup_lock);for (i =0 ; i < db_count; i++) { +struct buffer_head *bh; + block =descriptor_loc (sb, logical_sb_block, i); - sbi->s_group_desc[i] =sb_bread_unmovable (sb, block); -if (!sbi->s_group_desc[i]) { + bh =sb_bread_unmovable (sb, block); +if (!bh) {ext4_msg (sb,KERN_ERR ,"can't read group descriptor %d" , i); db_count = i; goto failed_mount2; } +rcu_read_lock (); +rcu_dereference (sbi->s_group_desc)[i] = bh; +rcu_read_unlock (); } sbi->s_gdb_count = db_count;if (!ext4_check_descriptors (sb, logical_sb_block, &first_not_zeroed)) {
@@ -4177,9 +4187,12 @@ failed_mount3:if (sbi->s_mmp_tsk)kthread_stop (sbi->s_mmp_tsk); failed_mount2: +rcu_read_lock (); + group_desc =rcu_dereference (sbi->s_group_desc);for (i =0 ; i < db_count; i++) -brelse (sbi->s_group_desc[i]); -kvfree (sbi->s_group_desc); +brelse (group_desc[i]); +kvfree (group_desc); +rcu_read_unlock (); failed_mount:if (sbi->s_chksum_driver)crypto_free_shash (sbi->s_chksum_driver);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 3/72 ext4: fix potential race between s_flex_groups online resizing and access
In reply to Greg Kroah-HartmanFrom: Suraj Jitindar Singh <[email protected]>
commit 7c990728b99ed6fbe9c75fc202fce1172d9916da upstream.
During an online resize an array of s_flex_groups structures gets replaced so it can get enlarged. If there is a concurrent access to the array and this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather than an array of structures. This is to ensure that the information contained in the structures cannot get out of sync during a resize due to an accessor updating the value in the old structure after it has been copied but before the array pointer is updated. Since the structures them- selves are no longer copied but only the pointers to them this case is mitigated.
--- fs/ext4/ext4.h | 2 +- fs/ext4/ialloc.c | 23 +++++++++------ fs/ext4/mballoc.c | 9 ++++-- fs/ext4/resize.c | 7 +++-- fs/ext4/super.c | 72 ++++++++++++++++++++++++++++++++--------------- 5 files changed, 76 insertions(+), 37 deletions(-)
fs/ext4/ext4.h +1 -1
@@ -1410,7 +1410,7 @@ struct ext4_sb_info {unsigned int s_extent_max_zeroout_kb;unsigned int s_log_groups_per_flex; -struct flex_groups *s_flex_groups; +struct flex_groups *__rcu *s_flex_groups;ext4_group_t s_flex_groups_allocated;/* workqueue for reserved extent conversions (buffered io) */
fs/ext4/ialloc.c +14 -9
@@ -331,11 +331,13 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)percpu_counter_inc (&sbi->s_freeinodes_counter);if (sbi->s_log_groups_per_flex) { -ext4_group_t f =ext4_flex_group (sbi, block_group); +struct flex_groups *fg; -atomic_inc (&sbi->s_flex_groups[f].free_inodes); + fg =sbi_array_rcu_deref (sbi, s_flex_groups, +ext4_flex_group (sbi, block_group)); +atomic_inc (&fg->free_inodes);if (is_directory) -atomic_dec (&sbi->s_flex_groups[f].used_dirs); +atomic_dec (&fg->used_dirs); }BUFFER_TRACE (bh2,"call ext4_handle_dirty_metadata" ); fatal =ext4_handle_dirty_metadata (handle,NULL , bh2);
@@ -376,12 +378,13 @@ static void get_orlov_stats(struct super_block *sb, ext4_group_t g, int flex_size, struct orlov_stats *stats) { struct ext4_group_desc *desc; -struct flex_groups *flex_group =EXT4_SB (sb)->s_flex_groups;if (flex_size >1 ) { - stats->free_inodes =atomic_read (&flex_group[g].free_inodes); - stats->free_clusters =atomic64_read (&flex_group[g].free_clusters); - stats->used_dirs =atomic_read (&flex_group[g].used_dirs); +struct flex_groups *fg =sbi_array_rcu_deref (EXT4_SB (sb), + s_flex_groups, g); + stats->free_inodes =atomic_read (&fg->free_inodes); + stats->free_clusters =atomic64_read (&fg->free_clusters); + stats->used_dirs =atomic_read (&fg->used_dirs);return ; }
@@ -981,7 +984,8 @@ got:if (sbi->s_log_groups_per_flex) {ext4_group_t f =ext4_flex_group (sbi, group); -atomic_inc (&sbi->s_flex_groups[f].used_dirs); +atomic_inc (&sbi_array_rcu_deref (sbi, s_flex_groups, + f)->used_dirs); } }if (ext4_has_group_desc_csum (sb)) {
@@ -1004,7 +1008,8 @@ got:if (sbi->s_log_groups_per_flex) { flex_group =ext4_flex_group (sbi, group); -atomic_dec (&sbi->s_flex_groups[flex_group].free_inodes); +atomic_dec (&sbi_array_rcu_deref (sbi, s_flex_groups, + flex_group)->free_inodes); } inode->i_ino = ino + group *EXT4_INODES_PER_GROUP (sb);
fs/ext4/mballoc.c +6 -3
@@ -2995,7 +2995,8 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,ext4_group_t flex_group =ext4_flex_group (sbi, ac->ac_b_ex.fe_group);atomic64_sub (ac->ac_b_ex.fe_len, - &sbi->s_flex_groups[flex_group].free_clusters); + &sbi_array_rcu_deref (sbi, s_flex_groups, + flex_group)->free_clusters); } err =ext4_handle_dirty_metadata (handle,NULL , bitmap_bh);
@@ -4887,7 +4888,8 @@ do_more:if (sbi->s_log_groups_per_flex) {ext4_group_t flex_group =ext4_flex_group (sbi, block_group);atomic64_add (count_clusters, - &sbi->s_flex_groups[flex_group].free_clusters); + &sbi_array_rcu_deref (sbi, s_flex_groups, + flex_group)->free_clusters); }if (!(flags &EXT4_FREE_BLOCKS_NO_QUOT_UPDATE ))
@@ -5032,7 +5034,8 @@ int ext4_group_add_blocks(handle_t *handle, struct super_block *sb,if (sbi->s_log_groups_per_flex) {ext4_group_t flex_group =ext4_flex_group (sbi, block_group);atomic64_add (EXT4_NUM_B2C (sbi, blocks_freed), - &sbi->s_flex_groups[flex_group].free_clusters); + &sbi_array_rcu_deref (sbi, s_flex_groups, + flex_group)->free_clusters); }ext4_mb_unload_buddy (&e4b);
fs/ext4/resize.c +5 -2
@@ -1422,11 +1422,14 @@ static void ext4_update_super(struct super_block *sb, percpu_counter_read(&sbi->s_freeclusters_counter));if (ext4_has_feature_flex_bg (sb) && sbi->s_log_groups_per_flex) {ext4_group_t flex_group; +struct flex_groups *fg; + flex_group =ext4_flex_group (sbi, group_data[0 ].group); + fg =sbi_array_rcu_deref (sbi, s_flex_groups, flex_group);atomic64_add (EXT4_NUM_B2C (sbi, free_blocks), - &sbi->s_flex_groups[flex_group].free_clusters); + &fg->free_clusters);atomic_add (EXT4_INODES_PER_GROUP (sb) * flex_gd->count, - &sbi->s_flex_groups[flex_group].free_inodes); + &fg->free_inodes); }/*
fs/ext4/super.c +50 -22
126 lines not on this page · raw message
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 4/72 ext4: fix potential race between s_group_info online resizing and access
In reply to Greg Kroah-HartmanFrom: Suraj Jitindar Singh <[email protected]>
[ Upstream commit df3da4ea5a0fc5d115c90d5aa6caa4dd433750a7 ]
During an online resize an array of pointers to s_group_info gets replaced so it can get enlarged. If there is a concurrent access to the array in ext4_get_group_info() and this memory has been reused then this can lead to an invalid memory access.
--- fs/ext4/ext4.h | 8 ++++---- fs/ext4/mballoc.c | 52 +++++++++++++++++++++++++++++++---------------- 2 files changed, 39 insertions(+), 21 deletions(-)
fs/ext4/ext4.h +4 -4
@@ -1363,7 +1363,7 @@ struct ext4_sb_info {#endif /* for buddy allocator */ -struct ext4_group_info ***s_group_info; +struct ext4_group_info **__rcu *s_group_info;struct inode *s_buddy_cache;spinlock_t s_md_lock;unsigned short *s_mb_offsets;
@@ -2813,13 +2813,13 @@ static inlinestruct ext4_group_info *ext4_get_group_info (struct super_block *sb,ext4_group_t group) { -struct ext4_group_info ***grp_info; +struct ext4_group_info **grp_info;long indexv, indexh;BUG_ON (group >=EXT4_SB (sb)->s_groups_count); - grp_info =EXT4_SB (sb)->s_group_info; indexv = group >> (EXT4_DESC_PER_BLOCK_BITS (sb)); indexh = group & ((EXT4_DESC_PER_BLOCK (sb)) -1 ); -return grp_info[indexv][indexh]; + grp_info =sbi_array_rcu_deref (EXT4_SB (sb), s_group_info, indexv); +return grp_info[indexh]; }/*
fs/ext4/mballoc.c +35 -17
114 lines not on this page · raw message
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 5/72 ipmi:ssif: Handle a possible NULL pointer reference
In reply to Greg Kroah-HartmanFrom: Corey Minyard <[email protected]>
[ Upstream commit 6b8526d3abc02c08a2f888e8c20b7ac9e5776dfe ]
In error cases a NULL can be passed to memcpy. The length will always be zero, so it doesn't really matter, but go ahead and check for NULL, anyway, to be more precise and avoid static analysis errors.
--- drivers/char/ipmi/ipmi_ssif.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/char/ipmi/ipmi_ssif.c +7 -3
@@ -742,10 +742,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, flags =ipmi_ssif_lock_cond (ssif_info, &oflags); msg = ssif_info->curr_msg;if (msg) { +if (data) { +if (len >IPMI_MAX_MSG_LENGTH ) + len =IPMI_MAX_MSG_LENGTH ; +memcpy (msg->rsp, data, len); + }else { + len =0 ; + } msg->rsp_size = len; -if (msg->rsp_size >IPMI_MAX_MSG_LENGTH ) - msg->rsp_size =IPMI_MAX_MSG_LENGTH ; -memcpy (msg->rsp, data, msg->rsp_size); ssif_info->curr_msg =NULL ; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 6/72 mac80211: consider more elements in parsing CRC
In reply to Greg Kroah-HartmanFrom: Johannes Berg <[email protected]>
[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ]
We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC:
- WLAN_EID_VHT_OPERATION
- WLAN_EID_OPMODE_NOTIF
I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored.
--- net/mac80211/util.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
net/mac80211/util.c +12 -6
@@ -939,16 +939,22 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action, elem_parse_failed = true;break ;case WLAN_EID_VHT_OPERATION : -if (elen >=sizeof (struct ieee80211_vht_operation )) +if (elen >=sizeof (struct ieee80211_vht_operation )) { elems->vht_operation = (void *)pos; -else - elem_parse_failed = true; +if (calc_crc) + crc =crc32_be (crc, pos -2 , elen +2 ); +break ; + } + elem_parse_failed = true;break ;case WLAN_EID_OPMODE_NOTIF : -if (elen >0 ) +if (elen >0 ) { elems->opmode_notif = pos; -else - elem_parse_failed = true; +if (calc_crc) + crc =crc32_be (crc, pos -2 , elen +2 ); +break ; + } + elem_parse_failed = true;break ;case WLAN_EID_MESH_ID : elems->mesh_id = pos;
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 7/72 cfg80211: check wiphy driver existence for drvinfo report
In reply to Greg Kroah-HartmanFrom: Sergey Matyukevich <[email protected]>
[ Upstream commit bfb7bac3a8f47100ebe7961bd14e924c96e21ca7 ]
When preparing ethtool drvinfo, check if wiphy driver is defined before dereferencing it. Driver may not exist, e.g. if wiphy is attached to a virtual platform device.
--- net/wireless/ethtool.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
net/wireless/ethtool.c +6 -2
@@ -6,9 +6,13 @@void cfg80211_get_drvinfo (struct net_device *dev,struct ethtool_drvinfo *info) {struct wireless_dev *wdev = dev->ieee80211_ptr; +struct device *pdev =wiphy_dev (wdev->wiphy); -strlcpy (info->driver,wiphy_dev (wdev->wiphy)->driver->name, -sizeof (info->driver)); +if (pdev->driver) +strlcpy (info->driver, pdev->driver->name, +sizeof (info->driver)); +else +strlcpy (info->driver,"N/A" ,sizeof (info->driver));strlcpy (info->version,init_utsname ()->release,sizeof (info->version));
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 8/72 cifs: Fix mode output in debugging statements
In reply to Greg Kroah-HartmanFrom: Frank Sorenson <[email protected]>
[ Upstream commit f52aa79df43c4509146140de0241bc21a4a3b4c7 ]
A number of the debug statements output file or directory mode in hex. Change these to print using octal.
--- fs/cifs/cifsacl.c | 4 ++-- fs/cifs/connect.c | 2 +- fs/cifs/inode.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
fs/cifs/cifsacl.c +2 -2
@@ -480,7 +480,7 @@ static void access_flags_to_mode(__le32 ace_flags, int type, umode_t *pmode, ((flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS)) *pmode |= (S_IXUGO & (*pbits_to_set)); -cifs_dbg (NOISY ,"access flags 0x%x mode now 0x%x\n" , flags, *pmode); +cifs_dbg (NOISY ,"access flags 0x%x mode now %04o\n" , flags, *pmode);return ; }
@@ -509,7 +509,7 @@ static void mode_to_access_flags(umode_t mode, umode_t bits_to_use,if (mode &S_IXUGO ) *pace_flags |=SET_FILE_EXEC_RIGHTS ; -cifs_dbg (NOISY ,"mode: 0x%x, access flags now 0x%x\n" , +cifs_dbg (NOISY ,"mode: %04o, access flags now 0x%x\n" , mode, *pace_flags);return ; }
fs/cifs/connect.c +1 -1
@@ -3402,7 +3402,7 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_gid = pvolume_info->linux_gid; cifs_sb->mnt_file_mode = pvolume_info->file_mode; cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; -cifs_dbg (FYI ,"file mode: 0x%hx dir mode: 0x%hx\n" , +cifs_dbg (FYI ,"file mode: %04ho dir mode: %04ho\n" , cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode); cifs_sb->actimeo = pvolume_info->actimeo;
fs/cifs/inode.c +1 -1
@@ -1540,7 +1540,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode)struct TCP_Server_Info *server;char *full_path; -cifs_dbg (FYI ,"In cifs_mkdir, mode = 0x%hx inode = 0x%p\n" , +cifs_dbg (FYI ,"In cifs_mkdir, mode = %04ho inode = 0x%p\n" , mode, inode); cifs_sb =CIFS_SB (inode->i_sb);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 9/72 cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
In reply to Greg Kroah-HartmanFrom: Sergey Matyukevich <[email protected]>
[ Upstream commit ea75080110a4c1fa011b0a73cb8f42227143ee3e ]
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported.
--- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)
net/wireless/nl80211.c +1 -0
@@ -330,6 +330,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = { [NL80211_ATTR_CONTROL_PORT_ETHERTYPE] = { .type = NLA_U16 }, [NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT] = { .type = NLA_FLAG }, [NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG }, + [NL80211_ATTR_STATUS_CODE] = { .type = NLA_U16 }, [NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 }, [NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 }, [NL80211_ATTR_PID] = { .type = NLA_U32 },
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 10/72 sysrq: Restore original console_loglevel when sysrq disabled
In reply to Greg Kroah-HartmanFrom: Petr Mladek <[email protected]>
commit 075e1a0c50f59ea210561d0d0fedbd945615df78 upstream.
The sysrq header line is printed with an increased loglevel to provide users some positive feedback.
The original loglevel is not restored when the sysrq operation is disabled. This bug was introduced in 2.6.12 (pre-git-history) by the commit ("Allow admin to enable only some of the Magic-Sysrq functions").
--- drivers/tty/sysrq.c | 1 + 1 file changed, 1 insertion(+)
drivers/tty/sysrq.c +1 -0
@@ -556,6 +556,7 @@ void __handle_sysrq(int key, bool check_ op_p->handler (key); }else {pr_cont ("This sysrq operation is disabled.\n" ); + console_loglevel = orig_log_level; } }else {pr_cont ("HELP : " );
Greg Kroah-Hartman
maintainerPATCH 11/72 sysrq: Remove duplicated sysrq message
In reply to Greg Kroah-HartmanFrom: Petr Mladek <[email protected]>
commit c3fee60908db4a8594f2e4a2131998384b8fa006 upstream.
The commit 97f5f0cd8cd0a0544 ("Input: implement SysRq as a separate input handler") added pr_fmt() definition. It caused a duplicated message prefix in the sysrq header messages, for example:
[ 177.053931] sysrq: SysRq : Show backtrace of all active CPUs [ 742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c)
--- drivers/tty/sysrq.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/tty/sysrq.c +3 -4
@@ -542,7 +542,6 @@ void __handle_sysrq(int key, bool check_*/ orig_log_level = console_loglevel; console_loglevel =CONSOLE_LOGLEVEL_DEFAULT ; -pr_info ("SysRq : " ); op_p =__sysrq_get_key_op (key);if (op_p) {
@@ -551,15 +550,15 @@ void __handle_sysrq(int key, bool check_* should not) and is the invoked operation enabled? */ if (!check_mask ||sysrq_on_mask (op_p->enable_mask)) { -pr_cont ("%s\n" , op_p->action_msg); +pr_info ("%s\n" , op_p->action_msg); console_loglevel = orig_log_level; op_p->handler (key); }else { -pr_cont ("This sysrq operation is disabled.\n" ); +pr_info ("This sysrq operation is disabled.\n" ); console_loglevel = orig_log_level; } }else { -pr_cont ("HELP : " ); +pr_info ("HELP : " );/* Only print the help msg once per handler */ for (i =0 ; i <ARRAY_SIZE (sysrq_key_table); i++) {if (sysrq_key_table[i]) {
Greg Kroah-Hartman
maintainerPATCH 12/72 net: fib_rules: Correctly set table field when table number exceeds 8 bits
In reply to Greg Kroah-HartmanFrom: Jethro Beekman <[email protected]>
[ Upstream commit 540e585a79e9d643ede077b73bcc7aa2d7b4d919 ]
In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to allow legacy software to deal with routing table numbers >= 256, but the same change to FIB rule queries was overlooked.
--- net/core/fib_rules.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/fib_rules.c +1 -1
@@ -570,7 +570,7 @@ static int fib_nl_fill_rule(struct sk_bu frh =nlmsg_data (nlh); frh->family = ops->family; - frh->table = rule->table; + frh->table = rule->table <256 ? rule->table :RT_TABLE_COMPAT ;if (nla_put_u32 (skb,FRA_TABLE , rule->table)) goto nla_put_failure;if (nla_put_u32 (skb,FRA_SUPPRESS_PREFIXLEN , rule->suppress_prefixlen))
Greg Kroah-Hartman
maintainerPATCH 13/72 net: phy: restore mdio regs in the iproc mdio driver
In reply to Greg Kroah-HartmanFrom: Arun Parameswaran <[email protected]>
commit 6f08e98d62799e53c89dbf2c9a49d77e20ca648c upstream.
The mii management register in iproc mdio block
does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend.
--- drivers/net/phy/mdio-bcm-iproc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
drivers/net/phy/mdio-bcm-iproc.c +20 -0
@@ -188,6 +188,23 @@ static int iproc_mdio_remove(struct platreturn 0 ; } +#ifdef CONFIG_PM_SLEEP +int iproc_mdio_resume (struct device *dev) +{ +struct platform_device *pdev =to_platform_device (dev); +struct iproc_mdio_priv *priv =platform_get_drvdata (pdev); + +/* restore the mii clock configuration */ +iproc_mdio_config_clk (priv->base); + +return 0 ; +} + +static const struct dev_pm_ops iproc_mdio_pm_ops = { + .resume = iproc_mdio_resume +}; +#endif /* CONFIG_PM_SLEEP */ +static const struct of_device_id iproc_mdio_of_match[] = { { .compatible ="brcm,iproc-mdio" , }, {/* sentinel */ },
@@ -198,6 +215,9 @@ static struct platform_driver iproc_mdio .driver = { .name = "iproc-mdio", .of_match_table = iproc_mdio_of_match, +#ifdef CONFIG_PM_SLEEP + .pm = &iproc_mdio_pm_ops, +#endif }, .probe = iproc_mdio_probe, .remove = iproc_mdio_remove,
Greg Kroah-Hartman
maintainerPATCH 14/72 ipv6: Fix nlmsg_flags when splitting a multipath route
In reply to Greg Kroah-HartmanFrom: Benjamin Poirier <[email protected]>
[ Upstream commit afecdb376bd81d7e16578f0cfe82a1aec7ae18f3 ]
When splitting an RTA_MULTIPATH request into multiple routes and adding the second and later components, we must not simply remove NLM_F_REPLACE but instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink message was malformed.
For example,
ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \ nexthop via fe80::30:2 dev dummy0 results in the following warnings: [ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE [ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route
This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to what it would get if the multipath route had been added in multiple netlink operations:
ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0
--- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+)
net/ipv6/route.c +1 -0
@@ -2953,6 +2953,7 @@ static int ip6_route_multipath_add(struc*/ cfg->fc_nlinfo.nlh->nlmsg_flags &= ~(NLM_F_EXCL |NLM_F_REPLACE ); + cfg->fc_nlinfo.nlh->nlmsg_flags |=NLM_F_CREATE ; nhn++; }
Greg Kroah-Hartman
maintainerPATCH 15/72 ipv6: Fix route replacement with dev-only route
In reply to Greg Kroah-HartmanFrom: Benjamin Poirier <[email protected]>
[ Upstream commit e404b8c7cfb31654c9024d497cec58a501501692 ]
After commit 27596472473a ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found.
--- net/ipv6/ip6_fib.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
net/ipv6/ip6_fib.c +4 -3
@@ -780,8 +780,7 @@ static int fib6_add_rt2node(struct fib6_ found++;break ; } -if (rt_can_ecmp) - fallback_ins = fallback_ins ?: ins; + fallback_ins = fallback_ins ?: ins; goto next_iter; }
@@ -821,7 +820,9 @@ next_iter: }if (fallback_ins && !found) { -/* No ECMP-able route found, replace first non-ECMP one */ +/* No matching route with same ecmp-able-ness found, replace +* first matching route +*/ ins = fallback_ins; iter = *ins; found++;
Greg Kroah-Hartman
maintainerPATCH 16/72 sctp: move the format error check out of __sctp_sf_do_9_1_abort
In reply to Greg Kroah-HartmanFrom: Xin Long <[email protected]>
[ Upstream commit 245709ec8be89af46ea7ef0444c9c80913999d99 ]
When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever.
However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.
This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer.
Thanks Hangbin for reporting this issue by the fuzz testing.
v1->v2:
- improve the comment in the code as Marcelo's suggestion.
--- net/sctp/sm_statefuns.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-)
net/sctp/sm_statefuns.c +20 -7
@@ -177,6 +177,16 @@ sctp_chunk_length_valid(struct sctp_chunreturn 1 ; } +/* Check for format error in an ABORT chunk */ +static inline bool sctp_err_chunk_valid (struct sctp_chunk *chunk) +{ +struct sctp_errhdr *err; + +sctp_walk_errors (err, chunk->chunk_hdr); + +return (void *)err == (void *)chunk->chunk_end; +} +/********************************************************** * These are the state functions for handling chunk events. **********************************************************/
@@ -2159,6 +2169,9 @@ sctp_disposition_t sctp_sf_shutdown_pend sctp_bind_addr_state(&asoc->base.bind_addr, &chunk->dest))return sctp_sf_discard_chunk (net, ep, asoc, type, arg, commands); +if (!sctp_err_chunk_valid (chunk)) +return sctp_sf_pdiscard (net, ep, asoc, type, arg, commands); +return __sctp_sf_do_9_1_abort (net, ep, asoc, type, arg, commands); }
@@ -2201,6 +2214,9 @@ sctp_disposition_t sctp_sf_shutdown_sent sctp_bind_addr_state(&asoc->base.bind_addr, &chunk->dest))return sctp_sf_discard_chunk (net, ep, asoc, type, arg, commands); +if (!sctp_err_chunk_valid (chunk)) +return sctp_sf_pdiscard (net, ep, asoc, type, arg, commands); +/* Stop the T2-shutdown timer. */ sctp_add_cmd_sf (commands,SCTP_CMD_TIMER_STOP ,SCTP_TO (SCTP_EVENT_TIMEOUT_T2_SHUTDOWN ));
@@ -2466,6 +2482,9 @@ sctp_disposition_t sctp_sf_do_9_1_abort( sctp_bind_addr_state(&asoc->base.bind_addr, &chunk->dest))return sctp_sf_discard_chunk (net, ep, asoc, type, arg, commands); +if (!sctp_err_chunk_valid (chunk)) +return sctp_sf_pdiscard (net, ep, asoc, type, arg, commands); +return __sctp_sf_do_9_1_abort (net, ep, asoc, type, arg, commands); }
@@ -2482,15 +2501,9 @@ static sctp_disposition_t __sctp_sf_do_9/* See if we have an error cause code in the chunk. */ len =ntohs (chunk->chunk_hdr->length); -if (len >=sizeof (struct sctp_chunkhdr ) +sizeof (struct sctp_errhdr )) { - -sctp_errhdr_t *err; -sctp_walk_errors (err, chunk->chunk_hdr); -if ((void *)err != (void *)chunk->chunk_end) -return sctp_sf_pdiscard (net, ep, asoc, type, arg, commands); +if (len >=sizeof (struct sctp_chunkhdr ) +sizeof (struct sctp_errhdr )) error = ((sctp_errhdr_t *)chunk->skb->data)->cause; - }sctp_add_cmd_sf (commands,SCTP_CMD_SET_SK_ERR ,SCTP_ERROR (ECONNRESET ));/* ASSOC_FAILED will DELETE_TCB. */
Greg Kroah-Hartman
maintainerPATCH 17/72 nfc: pn544: Fix occasional HW initialization failure
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
[ Upstream commit c3331d2fe3fd4d5e321f2467d01f72de7edfb5d0 ]
The PN544 driver checks the "enable" polarity during of driver's probe and it's doing that by turning ON and OFF NFC with different polarities until enabling succeeds. It takes some time for the hardware to power-down, and thus, to deassert the IRQ that is raised by turning ON the hardware. Since the delay after last power-down of the polarity-checking process is missed in the code, the interrupt may trigger immediately after installing the IRQ handler (right after the checking is done), which results in IRQ handler trying to touch the disabled HW and ends with marking NFC as 'DEAD' during of the driver's probe:
pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high pn544_hci_i2c 1-002a: NFC: invalid len byte
shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead
This patch fixes the occasional NFC initialization failure on Nexus 7 device.
--- drivers/nfc/pn544/i2c.c | 1 + 1 file changed, 1 insertion(+)
drivers/nfc/pn544/i2c.c +1 -0
@@ -241,6 +241,7 @@ static void pn544_hci_i2c_platform_init( out:gpio_set_value_cansleep (phy->gpio_en, !phy->en_polarity); +usleep_range (10000 ,15000 ); }static void pn544_hci_i2c_enable_mode (struct pn544_i2c_phy *phy,int run_mode)
Greg Kroah-Hartman
maintainerPATCH 18/72 net: sched: correct flower port blocking
In reply to Greg Kroah-HartmanFrom: Jason Baron <[email protected]>
[ Upstream commit 8a9093c79863b58cc2f9874d7ae788f0d622a596 ]
tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized.
Since key_basic and key_control are present for all flow keys, let's make sure they are initialized.
--- include/net/flow_dissector.h | 9 +++++++++ net/sched/cls_flower.c | 1 + 2 files changed, 10 insertions(+)
include/net/flow_dissector.h +9 -0
@@ -4,6 +4,7 @@#include <linux/types.h> #include <linux/in6.h> #include <linux/siphash.h> +#include <linux/string.h> #include <uapi/linux/if_ether.h> /**
@@ -185,4 +186,12 @@ static inline bool flow_keys_have_l4(stru32 flow_hash_from_keys (struct flow_keys *keys); +static inline void +flow_dissector_init_keys (struct flow_dissector_key_control *key_control, +struct flow_dissector_key_basic *key_basic) +{ +memset (key_control,0 ,sizeof (*key_control)); +memset (key_basic,0 ,sizeof (*key_basic)); +} +#endif
net/sched/cls_flower.c +1 -0
@@ -127,6 +127,7 @@ static int fl_classify(struct sk_buff *sstruct fl_flow_key skb_key;struct fl_flow_key skb_mkey; +flow_dissector_init_keys (&skb_key.control, &skb_key.basic);fl_clear_masked_range (&skb_key, &head->mask); skb_key.indev_ifindex = skb->skb_iif;/* skb_flow_dissect() does not set n_proto in case an unknown protocol,
Greg Kroah-Hartman
maintainerPATCH 19/72 ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit 37b0b6b8b99c0e1c1f11abbe7cf49b6d03795b3f upstream.
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes.
--- fs/ext4/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
fs/ext4/super.c +3 -3
@@ -1989,7 +1989,7 @@ int ext4_alloc_flex_bg_array(struct supe {struct ext4_sb_info *sbi =EXT4_SB (sb);struct flex_groups **old_groups, **new_groups; -int size, i; +int size, i, j;if (!sbi->s_log_groups_per_flex)return 0 ;
@@ -2010,8 +2010,8 @@ int ext4_alloc_flex_bg_array(struct supe sizeof(struct flex_groups)), GFP_KERNEL);if (!new_groups[i]) { -for (i--; i >= sbi->s_flex_groups_allocated; i--) -kvfree (new_groups[i]); +for (j = sbi->s_flex_groups_allocated; j < i; j++) +kvfree (new_groups[j]);kvfree (new_groups);ext4_msg (sb,KERN_ERR ,"not enough memory for %d flex groups" , size);
Greg Kroah-Hartman
maintainerPATCH 20/72 audit: fix error handling in audit_data_to_entry()
In reply to Greg Kroah-HartmanFrom: Paul Moore <[email protected]>
commit 2ad3e17ebf94b7b7f3f64c050ff168f9915345eb upstream.
Commit 219ca39427bf ("audit: use union for audit_field values since they are mutually exclusive") combined a number of separate fields in the audit_field struct into a single union. Generally this worked just fine because they are generally mutually exclusive. Unfortunately in audit_data_to_entry() the overlap can be a problem when a specific error case is triggered that causes the error path code to attempt to cleanup an audit_field struct and the cleanup involves attempting to free a stored LSM string (the lsm_str field). Currently the code always has a non-NULL value in the audit_field.lsm_str field as the top of the for-loop transfers a value into audit_field.val (both .lsm_str and .val are part of the same union); if audit_data_to_entry() fails and the audit_field struct is specified to contain a LSM string, but the audit_field.lsm_str has not yet been properly set, the error handling code will attempt to free the bogus audit_field.lsm_str value that was set with audit_field.val at the top of the for-loop.
This patch corrects this by ensuring that the audit_field.val is only set when needed (it is cleared when the audit_field struct is allocated with kcalloc()). It also corrects a few other issues to ensure that in case of error the proper error code is returned.
--- kernel/auditfilter.c | 71 ++++++++++++++++++++++++++++----------------------- 1 file changed, 39 insertions(+), 32 deletions(-)
kernel/auditfilter.c +39 -32
@@ -434,6 +434,7 @@ static struct audit_entry *audit_data_to bufp = data->buf;for (i =0 ; i < data->field_count; i++) {struct audit_field *f = &entry->rule.fields[i]; +u32 f_val; err = -EINVAL ;
@@ -442,12 +443,12 @@ static struct audit_entry *audit_data_to goto exit_free; f->type = data->fields[i]; - f->val = data->values[i]; + f_val = data->values[i];/* Support legacy tests for a valid loginuid */ -if ((f->type ==AUDIT_LOGINUID ) && (f->val ==AUDIT_UID_UNSET )) { +if ((f->type ==AUDIT_LOGINUID ) && (f_val ==AUDIT_UID_UNSET )) { f->type =AUDIT_LOGINUID_SET ; - f->val =0 ; + f_val =0 ; entry->rule.pflags |=AUDIT_LOGINUID_LEGACY ; }
@@ -463,7 +464,7 @@ static struct audit_entry *audit_data_tocase AUDIT_SUID :case AUDIT_FSUID :case AUDIT_OBJ_UID : - f->uid =make_kuid (current_user_ns (), f->val); + f->uid =make_kuid (current_user_ns (), f_val);if (!uid_valid (f->uid)) goto exit_free;break ;
@@ -472,11 +473,12 @@ static struct audit_entry *audit_data_tocase AUDIT_SGID :case AUDIT_FSGID :case AUDIT_OBJ_GID : - f->gid =make_kgid (current_user_ns (), f->val); + f->gid =make_kgid (current_user_ns (), f_val);if (!gid_valid (f->gid)) goto exit_free;break ;case AUDIT_ARCH : + f->val = f_val; entry->rule.arch_f = f;break ;case AUDIT_SUBJ_USER :
@@ -489,11 +491,13 @@ static struct audit_entry *audit_data_tocase AUDIT_OBJ_TYPE :case AUDIT_OBJ_LEV_LOW :case AUDIT_OBJ_LEV_HIGH : - str =audit_unpack_string (&bufp, &remain, f->val); -if (IS_ERR (str)) + str =audit_unpack_string (&bufp, &remain, f_val); +if (IS_ERR (str)) { + err =PTR_ERR (str); goto exit_free; - entry->rule.buflen += f->val; - + } + entry->rule.buflen += f_val; + f->lsm_str = str; err =security_audit_rule_init (f->type, f->op, str, (void **)&f->lsm_rule);/* Keep currently invalid fields around in case they
@@ -502,68 +506,71 @@ static struct audit_entry *audit_data_topr_warn ("audit rule for LSM \'%s\' is invalid\n" , str); err =0 ; - } -if (err) { -kfree (str); + }else if (err) goto exit_free; - }else - f->lsm_str = str;break ;case AUDIT_WATCH : - str =audit_unpack_string (&bufp, &remain, f->val); -if (IS_ERR (str)) + str =audit_unpack_string (&bufp, &remain, f_val); +if (IS_ERR (str)) { + err =PTR_ERR (str); goto exit_free; - entry->rule.buflen += f->val; - - err =audit_to_watch (&entry->rule, str, f->val, f->op); + } + err =audit_to_watch (&entry->rule, str, f_val, f->op);if (err) {kfree (str); goto exit_free; } + entry->rule.buflen += f_val;break ;case AUDIT_DIR : - str =audit_unpack_string (&bufp, &remain, f->val); -if (IS_ERR (str)) + str =audit_unpack_string (&bufp, &remain, f_val); +if (IS_ERR (str)) { + err =PTR_ERR (str); goto exit_free; - entry->rule.buflen += f->val; - + } err =audit_make_tree (&entry->rule, str, f->op);kfree (str);if (err) goto exit_free; + entry->rule.buflen += f_val;break ;case AUDIT_INODE : + f->val = f_val; err =audit_to_inode (&entry->rule, f);if (err) goto exit_free;break ;case AUDIT_FILTERKEY : -if (entry->rule.filterkey || f->val >AUDIT_MAX_KEY_LEN ) +if (entry->rule.filterkey || f_val >AUDIT_MAX_KEY_LEN ) goto exit_free; - str =audit_unpack_string (&bufp, &remain, f->val); -if (IS_ERR (str)) + str =audit_unpack_string (&bufp, &remain, f_val); +if (IS_ERR (str)) { + err =PTR_ERR (str); goto exit_free; - entry->rule.buflen += f->val; + } + entry->rule.buflen += f_val; entry->rule.filterkey = str;break ;case AUDIT_EXE : -if (entry->rule.exe || f->val >PATH_MAX ) +if (entry->rule.exe || f_val >PATH_MAX ) goto exit_free; - str =audit_unpack_string (&bufp, &remain, f->val); + str =audit_unpack_string (&bufp, &remain, f_val);if (IS_ERR (str)) { err =PTR_ERR (str); goto exit_free; } - entry->rule.buflen += f->val; - - audit_mark =audit_alloc_mark (&entry->rule, str, f->val); + audit_mark =audit_alloc_mark (&entry->rule, str, f_val);if (IS_ERR (audit_mark)) {kfree (str); err =PTR_ERR (audit_mark); goto exit_free; } + entry->rule.buflen += f_val; entry->rule.exe = audit_mark;break ; +default : + f->val = f_val; +break ; } }
Greg Kroah-Hartman
maintainerPATCH 21/72 HID: core: fix off-by-one memset in hid_report_raw_event()
In reply to Greg Kroah-HartmanFrom: Johan Korsnes <[email protected]>
commit 5ebdffd25098898aff1249ae2f7dbfddd76d8f8f upstream.
In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated, but the report-number byte is not correctly handled. This results in a off-by-one in the following memset, causing a kernel Oops and ensuing system crash.
Note: With commit 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract") I no longer hit the kernel Oops as we instead fail "controlled" at probe if there is a report too long in the HID report-descriptor. hid_report_raw_event() is an exported symbol, so presumabely we cannot always rely on this being the case.
function.")
--- drivers/hid/hid-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/hid/hid-core.c +3 -1
@@ -1508,7 +1508,9 @@ int hid_report_raw_event(struct hid_devi rsize = ((report->size -1 ) >>3 ) +1 ; -if (rsize >HID_MAX_BUFFER_SIZE ) +if (report_enum->numbered && rsize >=HID_MAX_BUFFER_SIZE ) + rsize =HID_MAX_BUFFER_SIZE -1 ; +else if (rsize >HID_MAX_BUFFER_SIZE ) rsize =HID_MAX_BUFFER_SIZE ;if (csize < rsize) {
Greg Kroah-Hartman
maintainerPATCH 22/72 HID: core: increase HID report buffer size to 8KiB
In reply to Greg Kroah-HartmanFrom: Johan Korsnes <[email protected]>
commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream.
We have a HID touch device that reports its opens and shorts test results in HID buffers of size 8184 bytes. The maximum size of the HID buffer is currently set to 4096 bytes, causing probe of this device to fail. With this patch we increase the maximum size of the HID buffer to 8192 bytes, making device probe and acquisition of said buffers succeed.
--- include/linux/hid.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/hid.h +1 -1
@@ -451,7 +451,7 @@ struct hid_report_enum { };#define HID_MIN_BUFFER_SIZE 64/* make sure there is at least a packet size of space */ -#define HID_MAX_BUFFER_SIZE 4096/* 4kb */ +#define HID_MAX_BUFFER_SIZE 8192/* 8kb */ #define HID_CONTROL_FIFO_SIZE 256/* to init devices with >100 reports */ #define HID_OUTPUT_FIFO_SIZE 64
Greg Kroah-Hartman
maintainerPATCH 23/72 HID: hiddev: Fix race in in hiddev_disconnect()
In reply to Greg Kroah-HartmanFrom: [email protected] <[email protected]>
commit 5c02c447eaeda29d3da121a2e17b97ccaf579b51 upstream.
Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect(). The hiddev_disconnect() function sets "hiddev->exist = 0;" so hiddev_release() can free it as soon as we drop the "existancelock" lock. This patch moves the mutex_unlock(&hiddev->existancelock) until after we have finished using it.
--- drivers/hid/usbhid/hiddev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/usbhid/hiddev.c +1 -1
@@ -962,9 +962,9 @@ void hiddev_disconnect(struct hid_device hiddev->exist =0 ;if (hiddev->open) { -mutex_unlock (&hiddev->existancelock);usbhid_close (hiddev->hid);wake_up_interruptible (&hiddev->wait); +mutex_unlock (&hiddev->existancelock); }else {mutex_unlock (&hiddev->existancelock);kfree (hiddev);
Greg Kroah-Hartman
maintainerPATCH 24/72 MIPS: VPE: Fix a double free and a memory leak in release_vpe()
In reply to Greg Kroah-HartmanFrom: Christophe JAILLET <[email protected]>
commit bef8e2dfceed6daeb6ca3e8d33f9c9d43b926580 upstream.
Pointer on the memory allocated by 'alloc_progmem()' is stored in 'v->load_addr'. So this is this memory that should be freed by 'release_progmem()'.
'release_progmem()' is only a call to 'kfree()'.
With the current code, there is both a double free and a memory leak. Fix it by passing the correct pointer to 'release_progmem()'.
--- arch/mips/kernel/vpe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/kernel/vpe.c +1 -1
@@ -134,7 +134,7 @@ void release_vpe(struct vpe *v) {list_del (&v->list);if (v->load_addr) -release_progmem (v); +release_progmem (v->load_addr);kfree (v); }
Greg Kroah-Hartman
maintainerPATCH 25/72 i2c: jz4780: silence log flood on txabrt
In reply to Greg Kroah-HartmanFrom: Wolfram Sang <[email protected]>
commit 9e661cedcc0a072d91a32cb88e0515ea26e35711 upstream.
The printout for txabrt is way too talkative and is highly annoying with scanning programs like 'i2cdetect'. Reduce it to the minimum, the rest can be gained by I2C core debugging and datasheet information. Also, make it a debug printout, it won't help the regular user.
--- drivers/i2c/busses/i2c-jz4780.c | 36 ++---------------------------------- 1 file changed, 2 insertions(+), 34 deletions(-)
drivers/i2c/busses/i2c-jz4780.c +2 -34
@@ -82,25 +82,6 @@#define JZ4780_I2C_STA_TFNF BIT(1)#define JZ4780_I2C_STA_ACT BIT(0) -static const char *const jz4780_i2c_abrt_src[] = { -"ABRT_7B_ADDR_NOACK" , -"ABRT_10ADDR1_NOACK" , -"ABRT_10ADDR2_NOACK" , -"ABRT_XDATA_NOACK" , -"ABRT_GCALL_NOACK" , -"ABRT_GCALL_READ" , -"ABRT_HS_ACKD" , -"SBYTE_ACKDET" , -"ABRT_HS_NORSTRT" , -"SBYTE_NORSTRT" , -"ABRT_10B_RD_NORSTRT" , -"ABRT_MASTER_DIS" , -"ARB_LOST" , -"SLVFLUSH_TXFIFO" , -"SLV_ARBLOST" , -"SLVRD_INTX" , -}; -#define JZ4780_I2C_INTST_IGC BIT(11)#define JZ4780_I2C_INTST_ISTT BIT(10)#define JZ4780_I2C_INTST_ISTP BIT(9)
@@ -538,21 +519,8 @@ done:static void jz4780_i2c_txabrt (struct jz4780_i2c *i2c,int src) { -int i; - -dev_err (&i2c->adap.dev,"txabrt: 0x%08x\n" , src); -dev_err (&i2c->adap.dev,"device addr=%x\n" , -jz4780_i2c_readw (i2c,JZ4780_I2C_TAR )); -dev_err (&i2c->adap.dev,"send cmd count:%d %d\n" , - i2c->cmd, i2c->cmd_buf[i2c->cmd]); -dev_err (&i2c->adap.dev,"receive data count:%d %d\n" , - i2c->cmd, i2c->data_buf[i2c->cmd]); - -for (i =0 ; i <16 ; i++) { -if (src &BIT (i)) -dev_dbg (&i2c->adap.dev,"I2C TXABRT[%d]=%s\n" , - i, jz4780_i2c_abrt_src[i]); - } +dev_dbg (&i2c->adap.dev,"txabrt: 0x%08x, cmd: %d, send: %d, recv: %d\n" , + src, i2c->cmd, i2c->cmd_buf[i2c->cmd], i2c->data_buf[i2c->cmd]); } static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
Greg Kroah-Hartman
maintainerPATCH 26/72 ecryptfs: Fix up bad backport of fe2e082f5da5b4a0a92ae32978f81507ef37ec66
In reply to Greg Kroah-HartmanFrom: Nathan Chancellor <[email protected]>
When doing the 4.9 merge into certain Android trees, I noticed a warning from Android's deprecated GCC 4.9.4, which causes a build failure in those trees due to basically -Werror:
fs/ecryptfs/keystore.c: In function 'ecryptfs_parse_packet_set':fs/ecryptfs/keystore.c:1357:2: warning: 'auth_tok_list_item' may be used uninitialized in this function [-Wmaybe-uninitialized]
memset(auth_tok_list_item, 0,
^fs/ecryptfs/keystore.c:1260:38: note: 'auth_tok_list_item' was declared here
struct ecryptfs_auth_tok_list_item *auth_tok_list_item;
^GCC 9.2.0 was not able to pick up this warning when I tested it.
Turns out that Clang warns as well when -Wuninitialized is used, which is not the case in older stable trees at the moment (but shows value in potentially backporting the various warning fixes currently in upstream to get more coverage).
fs/ecryptfs/keystore.c:1284:6: warning: variable 'auth_tok_list_item' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (data[(*packet_size)++] != ECRYPTFS_TAG_1_PACKET_TYPE) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ecryptfs/keystore.c:1360:4: note: uninitialized use occurs here
auth_tok_list_item);
^~~~~~~~~~~~~~~~~~
fs/ecryptfs/keystore.c:1284:2: note: remove the 'if' if its condition is
always false
if (data[(*packet_size)++] != ECRYPTFS_TAG_1_PACKET_TYPE) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/ecryptfs/keystore.c:1260:56: note: initialize the variable
'auth_tok_list_item' to silence this warning
struct ecryptfs_auth_tok_list_item *auth_tok_list_item;
^
= NULL1 warning generated.
Somehow, commit fe2e082f5da5 ("ecryptfs: fix a memory leak bug in parse_tag_1_packet()") upstream was not applied in the correct if block in 4.4.215, 4.9.215, and 4.14.172, which will indeed lead to use of uninitialized memory. Fix it up by undoing the bad backport in those trees then reapplying the patch in the proper location.
--- fs/ecryptfs/keystore.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/ecryptfs/keystore.c +2 -2
@@ -1280,7 +1280,7 @@ parse_tag_1_packet(struct ecryptfs_cryptprintk (KERN_ERR "Enter w/ first byte != 0x%.2x\n" ,ECRYPTFS_TAG_1_PACKET_TYPE ); rc = -EINVAL ; - goto out_free; + goto out; }/* Released: wipe_auth_tok_list called in ecryptfs_parse_packet_set or * at end of function upon failure */
@@ -1330,7 +1330,7 @@ parse_tag_1_packet(struct ecryptfs_cryptprintk (KERN_WARNING "Tag 1 packet contains key larger " "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES" ); rc = -EINVAL ; - goto out; + goto out_free; }memcpy ((*new_auth_tok)->session_key.encrypted_key, &data[(*packet_size)], (body_size - (ECRYPTFS_SIG_SIZE +2 )));
Greg Kroah-Hartman
maintainerPATCH 27/72 include/linux/bitops.h: introduce BITS_PER_TYPE
In reply to Greg Kroah-HartmanFrom: Chris Wilson <[email protected]>
commit 9144d75e22cad3c89e6b2ccab551db9ee28d250a upstream.
net_dim.h has a rather useful extension to BITS_PER_BYTE to compute the number of bits in a type (BITS_PER_BYTE * sizeof(T)), so promote the macro to bitops.h, alongside BITS_PER_BYTE, for wider usage.
--- include/linux/bitops.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/bitops.h +2 -1
@@ -3,7 +3,8 @@#include <asm/types.h> #include <linux/bits.h> -#define BITS_TO_LONGS (nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) +#define BITS_PER_TYPE (type) (sizeof(type) * BITS_PER_BYTE) +#define BITS_TO_LONGS (nr) DIV_ROUND_UP(nr, BITS_PER_TYPE(long))extern unsigned int __sw_hweight8 (unsigned int w);extern unsigned int __sw_hweight16 (unsigned int w);
Greg Kroah-Hartman
maintainerPATCH 28/72 net: netlink: cap max groups which will be considered in netlink_bind()
In reply to Greg Kroah-HartmanFrom: Nikolay Aleksandrov <[email protected]>
commit 3a20773beeeeadec41477a5ba872175b778ff752 upstream.
Since nl_groups is a u32 we can't bind more groups via ->bind (netlink_bind) call, but netlink has supported more groups via setsockopt() for a long time and thus nlk->ngroups could be over 32. Recently I added support for per-vlan notifications and increased the groups to 33 for NETLINK_ROUTE which exposed an old bug in the netlink_bind() code causing out-of-bounds access on archs where unsigned long is 32 bits via test_bit() on a local variable. Fix this by capping the maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively capping them at 32 which is the minimum of allocated groups and the maximum groups which can be bound via netlink_bind().
--- net/netlink/af_netlink.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
net/netlink/af_netlink.c +3 -2
@@ -1003,7 +1003,8 @@ static int netlink_bind(struct socket *sif (nlk->netlink_bind && groups) {int group; -for (group =0 ; group < nlk->ngroups; group++) { +/* nl_groups is a u32, so cap the maximum groups we can bind */ +for (group =0 ; group <BITS_PER_TYPE (u32); group++) {if (!test_bit (group, &groups))continue ; err = nlk->netlink_bind (net, group +1 );
@@ -1022,7 +1023,7 @@ static int netlink_bind(struct socket *s netlink_insert(sk, nladdr->nl_pid) :netlink_autobind (sock);if (err) { -netlink_undo_bind (nlk->ngroups, groups, sk); +netlink_undo_bind (BITS_PER_TYPE (u32), groups, sk);return err; } }
Greg Kroah-Hartman
maintainerPATCH 29/72 namei: only return -ECHILD from follow_dotdot_rcu()
In reply to Greg Kroah-HartmanFrom: Aleksa Sarai <[email protected]>
commit 2b98149c2377bff12be5dd3ce02ae0506e2dd613 upstream.
It's over-zealous to return hard errors under RCU-walk here, given that a REF-walk will be triggered for all other cases handling ".." under RCU.
The original purpose of this check was to ensure that if a rename occurs such that a directory is moved outside of the bind-mount which the resolution started in, it would be detected and blocked to avoid being able to mess with paths outside of the bind-mount. However, triggering a new REF-walk is just as effective a solution.
--- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/namei.c +1 -1
@@ -1358,7 +1358,7 @@ static int follow_dotdot_rcu(struct name nd->path.dentry = parent; nd->seq = seq;if (unlikely (!path_connected (&nd->path))) -return -ENOENT ; +return -ECHILD ;break ; }else {struct mount *mnt =real_mount (nd->path.mnt);
Greg Kroah-Hartman
maintainerPATCH 30/72 KVM: Check for a bad hva before dropping into the ghc slow path
In reply to Greg Kroah-HartmanFrom: Sean Christopherson <[email protected]>
commit fcfbc617547fc6d9552cb6c1c563b6a90ee98085 upstream.
When reading/writing using the guest/host cache, check for a bad hva before checking for a NULL memslot, which triggers the slow path for handing cross-page accesses. Because the memslot is nullified on error by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after crossing into a new page, then the kvm_{read,write}_guest() slow path could potentially write/access the first chunk prior to detecting the bad hva.
Arguably, performing a partial access is semantically correct from an architectural perspective, but that behavior is certainly not intended. In the original implementation, memslot was not explicitly nullified and therefore the partial access behavior varied based on whether the memslot itself was null, or if the hva was simply bad. The current behavior was introduced as a seemingly unintentional side effect in commit f1b9dd5eb86c ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init"), which justified the change with "since some callers don't check the return code from this function, it sit seems prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking the result of the cache initialization, which is arguably a bug in its own right, at best simply weird.
--- virt/kvm/kvm_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
virt/kvm/kvm_main.c +6 -6
@@ -1865,12 +1865,12 @@ int kvm_write_guest_cached(struct kvm *kif (slots->generation != ghc->generation)kvm_gfn_to_hva_cache_init (kvm, ghc, ghc->gpa, ghc->len); -if (unlikely (!ghc->memslot)) -return kvm_write_guest (kvm, ghc->gpa, data, len); -if (kvm_is_error_hva (ghc->hva))return -EFAULT ; +if (unlikely (!ghc->memslot)) +return kvm_write_guest (kvm, ghc->gpa, data, len); + r =__copy_to_user ((void __user *)ghc->hva, data, len);if (r)return -EFAULT ;
@@ -1891,12 +1891,12 @@ int kvm_read_guest_cached(struct kvm *kvif (slots->generation != ghc->generation)kvm_gfn_to_hva_cache_init (kvm, ghc, ghc->gpa, ghc->len); -if (unlikely (!ghc->memslot)) -return kvm_read_guest (kvm, ghc->gpa, data, len); -if (kvm_is_error_hva (ghc->hva))return -EFAULT ; +if (unlikely (!ghc->memslot)) +return kvm_read_guest (kvm, ghc->gpa, data, len); + r =__copy_from_user (data, (void __user *)ghc->hva, len);if (r)return -EFAULT ;
Greg Kroah-Hartman
maintainerPATCH 31/72 slip: stop double free sl->dev in slip_open
In reply to Greg Kroah-HartmanFrom: yangerkun <[email protected]>
After include 3b5a39979daf ("slip: Fix memory leak in slip_open error path") and e58c19124189 ("slip: Fix use-after-free Read in slip_open") with 4.4.y/4.9.y. We will trigger a bug since we can double free sl->dev in slip_open. Actually, we should backport cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") too since it has delete free_netdev from sl_free_netdev. Fix it by delete free_netdev from slip_open.
--- drivers/net/slip/slip.c | 1 - 1 file changed, 1 deletion(-)
drivers/net/slip/slip.c +0 -1
@@ -868,7 +868,6 @@ err_free_chan: tty->disc_data =NULL ;clear_bit (SLF_INUSE , &sl->flags);sl_free_netdev (sl->dev); -free_netdev (sl->dev); err_exit:rtnl_unlock ();
Greg Kroah-Hartman
maintainerPATCH 32/72 mm: make page ref count overflow check tighter and more explicit
In reply to Greg Kroah-HartmanFrom: Linus Torvalds <[email protected]>
commit f958d7b528b1b40c44cfda5eabe2d82760d868c3 upsteam.
We have a VM_BUG_ON() to check that the page reference count doesn't underflow (or get close to overflow) by checking the sign of the count.
That's all fine, but we actually want to allow people to use a "get page ref unless it's already very high" helper function, and we want that one to use the sign of the page ref (without triggering this VM_BUG_ON).
Change the VM_BUG_ON to only check for small underflows (or _very_ close to overflowing), and ignore overflows which have strayed into negative territory.
[ 4.4.y backport notes:
Ajay: Open-coded atomic refcount access due to missing page_ref_count() helper in 4.4.y
Srivatsa: Added overflow check to get_page_foll() and related code. ]
--- include/linux/mm.h | 6 +++++- mm/internal.h | 5 +++-- 2 files changed, 8 insertions(+), 3 deletions(-)
include/linux/mm.h +5 -1
@@ -488,6 +488,10 @@ static inline void get_huge_page_tail(stextern bool __get_page_tail (struct page *page); +/* 127: arbitrary random number, small enough to assemble well */ +#define page_ref_zero_or_close_to_overflow (page) \ + ((unsigned int) atomic_read(&page->_count) + 127u <= 127u) +static inline void get_page (struct page *page) {if (unlikely (PageTail (page)))
@@ -497,7 +501,7 @@ static inline void get_page(struct page* Getting a normal page or the head of a compound page * requires to already have an elevated page->_count. */ -VM_BUG_ON_PAGE (atomic_read (&page->_count) <=0 , page); +VM_BUG_ON_PAGE (page_ref_zero_or_close_to_overflow (page), page);atomic_inc (&page->_count); }
mm/internal.h +3 -2
@@ -81,7 +81,8 @@ static inline void __get_page_tail_foll(* speculative page access (like in * page_cache_get_speculative()) on tail pages. */ -VM_BUG_ON_PAGE (atomic_read (&compound_head (page)->_count) <=0 , page); +VM_BUG_ON_PAGE (page_ref_zero_or_close_to_overflow (compound_head (page)), + page);if (get_page_head)atomic_inc (&compound_head (page)->_count);get_huge_page_tail (page);
@@ -106,7 +107,7 @@ static inline void get_page_foll(struct* Getting a normal page or the head of a compound page * requires to already have an elevated page->_count. */ -VM_BUG_ON_PAGE (atomic_read (&page->_count) <=0 , page); +VM_BUG_ON_PAGE (page_ref_zero_or_close_to_overflow (page), page);atomic_inc (&page->_count); } }
Greg Kroah-Hartman
maintainerPATCH 33/72 mm: add try_get_page() helper function
In reply to Greg Kroah-HartmanFrom: Linus Torvalds <[email protected]>
commit 88b1a17dfc3ed7728316478fae0f5ad508f50397 upsteam.
This is the same as the traditional 'get_page()' function, but instead of unconditionally incrementing the reference count of the page, it only does so if the count was "safe". It returns whether the reference count was incremented (and is marked __must_check, since the caller obviously has to be aware of it).
Also like 'get_page()', you can't use this function unless you already had a reference to the page. The intent is that you can use this exactly like get_page(), but in situations where you want to limit the maximum reference count.
The code currently does an unconditional WARN_ON_ONCE() if we ever hit the reference count issues (either zero or negative), as a notification that the conditional non-increment actually happened.
NOTE! The count access for the "safety" check is inherently racy, but that doesn't matter since the buffer we use is basically half the range of the reference count (ie we look at the sign of the count).
[ 4.4.y backport notes:
Srivatsa:
- Adapted try_get_page() to match the get_page() implementation in 4.4.y, except for the refcount check.
- Added try_get_page_foll() which will be needed in a subsequent patch. ]
--- include/linux/mm.h | 12 ++++++++++++ mm/internal.h | 23 +++++++++++++++++++++++ 2 files changed, 35 insertions(+)
include/linux/mm.h +12 -0
@@ -505,6 +505,18 @@ static inline void get_page(struct pageatomic_inc (&page->_count); } +static inline __must_check bool try_get_page (struct page *page) +{ +if (unlikely (PageTail (page))) +if (likely (__get_page_tail (page))) +return true; + +if (WARN_ON_ONCE (atomic_read (&page->_count) <=0 )) +return false; +atomic_inc (&page->_count); +return true; +} +static inline struct page *virt_to_head_page (const void *x) {struct page *page =virt_to_page (x);
mm/internal.h +23 -0
@@ -112,6 +112,29 @@ static inline void get_page_foll(struct } } +static inline __must_check bool try_get_page_foll (struct page *page) +{ +if (unlikely (PageTail (page))) { +if (WARN_ON_ONCE (atomic_read (&compound_head (page)->_count) <=0 )) +return false; +/* +* This is safe only because +* __split_huge_page_refcount() can't run under +* get_page_foll() because we hold the proper PT lock. +*/ +__get_page_tail_foll (page, true); + }else { +/* +* Getting a normal page or the head of a compound page +* requires to already have an elevated page->_count. +*/ +if (WARN_ON_ONCE (atomic_read (&page->_count) <=0 )) +return false; +atomic_inc (&page->_count); + } +return true; +} +extern unsigned long highest_memmap_pfn;/*
Greg Kroah-Hartman
maintainerPATCH 34/72 mm, gup: remove broken VM_BUG_ON_PAGE compound check for hugepages
In reply to Greg Kroah-HartmanFrom: Will Deacon <[email protected]>
commit a3e328556d41bb61c55f9dfcc62d6a826ea97b85 upstream.
When operating on hugepages with DEBUG_VM enabled, the GUP code checks the compound head for each tail page prior to calling page_cache_add_speculative. This is broken, because on the fast-GUP path (where we don't hold any page table locks) we can be racing with a concurrent invocation of split_huge_page_to_list.
split_huge_page_to_list deals with this race by using page_ref_freeze to freeze the page and force concurrent GUPs to fail whilst the component pages are modified. This modification includes clearing the compound_head field for the tail pages, so checking this prior to a successful call to page_cache_add_speculative can lead to false
positives: In fact, page_cache_add_speculative *already* has this check once the page refcount has been successfully updated, so we can simply remove the broken calls to VM_BUG_ON_PAGE.
--- mm/gup.c | 3 --- 1 file changed, 3 deletions(-)
mm/gup.c +0 -3
@@ -1134,7 +1134,6 @@ static int gup_huge_pmd(pmd_t orig, pmd_ page = head + ((addr & ~PMD_MASK ) >>PAGE_SHIFT ); tail = page; do { - VM_BUG_ON_PAGE(compound_head(page) != head, page); pages[*nr] = page; (*nr)++; page++;
@@ -1181,7 +1180,6 @@ static int gup_huge_pud(pud_t orig, pud_ page = head + ((addr & ~PUD_MASK ) >>PAGE_SHIFT ); tail = page; do { - VM_BUG_ON_PAGE(compound_head(page) != head, page); pages[*nr] = page; (*nr)++; page++;
@@ -1224,7 +1222,6 @@ static int gup_huge_pgd(pgd_t orig, pgd_ page = head + ((addr & ~PGDIR_MASK ) >>PAGE_SHIFT ); tail = page; do { - VM_BUG_ON_PAGE(compound_head(page) != head, page); pages[*nr] = page; (*nr)++; page++;
Greg Kroah-Hartman
maintainerPATCH 35/72 mm, gup: ensure real head page is ref-counted when using hugepages
In reply to Greg Kroah-HartmanFrom: Punit Agrawal <[email protected]>
commit d63206ee32b6e64b0e12d46e5d6004afd9913713 upstream.
When speculatively taking references to a hugepage using page_cache_add_speculative() in gup_huge_pmd(), it is assumed that the page returned by pmd_page() is the head page. Although normally true, this assumption doesn't hold when the hugepage comprises of successive page table entries such as when using contiguous bit on arm64 at PTE or PMD levels.
This can be addressed by ensuring that the page passed to page_cache_add_speculative() is the real head or by de-referencing the head page within the function.
We take the first approach to keep the usage pattern aligned with page_cache_get_speculative() where users already pass the appropriate page, i.e., the de-referenced head.
Apply the same logic to fix gup_huge_[pud|pgd]() as well.
--- mm/gup.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
mm/gup.c +6 -6
@@ -1130,8 +1130,7 @@ static int gup_huge_pmd(pmd_t orig, pmd_return 0 ; refs =0 ; - head =pmd_page (orig); - page = head + ((addr & ~PMD_MASK ) >>PAGE_SHIFT ); + page =pmd_page (orig) + ((addr & ~PMD_MASK ) >>PAGE_SHIFT ); tail = page; do { pages[*nr] = page;
@@ -1140,6 +1139,7 @@ static int gup_huge_pmd(pmd_t orig, pmd_ refs++; }while (addr +=PAGE_SIZE , addr != end); + head =compound_head (pmd_page (orig));if (!page_cache_add_speculative (head, refs)) { *nr -= refs;return 0 ;
@@ -1176,8 +1176,7 @@ static int gup_huge_pud(pud_t orig, pud_return 0 ; refs =0 ; - head =pud_page (orig); - page = head + ((addr & ~PUD_MASK ) >>PAGE_SHIFT ); + page =pud_page (orig) + ((addr & ~PUD_MASK ) >>PAGE_SHIFT ); tail = page; do { pages[*nr] = page;
@@ -1186,6 +1185,7 @@ static int gup_huge_pud(pud_t orig, pud_ refs++; }while (addr +=PAGE_SIZE , addr != end); + head =compound_head (pud_page (orig));if (!page_cache_add_speculative (head, refs)) { *nr -= refs;return 0 ;
@@ -1218,8 +1218,7 @@ static int gup_huge_pgd(pgd_t orig, pgd_return 0 ; refs =0 ; - head =pgd_page (orig); - page = head + ((addr & ~PGDIR_MASK ) >>PAGE_SHIFT ); + page =pgd_page (orig) + ((addr & ~PGDIR_MASK ) >>PAGE_SHIFT ); tail = page; do { pages[*nr] = page;
@@ -1228,6 +1227,7 @@ static int gup_huge_pgd(pgd_t orig, pgd_ refs++; }while (addr +=PAGE_SIZE , addr != end); + head =compound_head (pgd_page (orig));if (!page_cache_add_speculative (head, refs)) { *nr -= refs;return 0 ;
Greg Kroah-Hartman
maintainerPATCH 36/72 mm: prevent get_user_pages() from overflowing page refcount
In reply to Greg Kroah-HartmanFrom: Linus Torvalds <[email protected]>
commit 8fde12ca79aff9b5ba951fce1a2641901b8d8e64 upstream.
If the page refcount wraps around past zero, it will be freed while there are still four billion references to it. One of the possible avenues for an attacker to try to make this happen is by doing direct IO on a page multiple times. This patch makes get_user_pages() refuse to take a new page reference if there are already more than two billion references to the page.
[ 4.4.y backport notes:
Ajay: - Added local variable 'err' with-in follow_hugetlb_page()
from 2be7cfed995e, to resolve compilation error
- Added page_ref_count()
- Added missing refcount overflow checks on x86 and s390 (Vlastimil, thanks for this change)
Srivatsa: - Replaced call to get_page_foll() with try_get_page_foll() ]
--- arch/s390/mm/gup.c | 6 ++++-- arch/x86/mm/gup.c | 9 ++++++++- include/linux/mm.h | 5 +++++ mm/gup.c | 42 +++++++++++++++++++++++++++++++++--------- mm/hugetlb.c | 16 +++++++++++++++- 5 files changed, 65 insertions(+), 13 deletions(-)
arch/s390/mm/gup.c +4 -2
@@ -37,7 +37,8 @@ static inline int gup_pte_range(pmd_t *preturn 0 ;VM_BUG_ON (!pfn_valid (pte_pfn (pte))); page =pte_page (pte); -if (!page_cache_get_speculative (page)) +if (WARN_ON_ONCE (page_ref_count (page) <0 ) + || !page_cache_get_speculative (page))return 0 ;if (unlikely (pte_val (pte) !=pte_val (*ptep))) {put_page (page);
@@ -76,7 +77,8 @@ static inline int gup_huge_pmd(pmd_t *pm refs++; }while (addr +=PAGE_SIZE , addr != end); -if (!page_cache_add_speculative (head, refs)) { +if (WARN_ON_ONCE (page_ref_count (head) <0 ) + || !page_cache_add_speculative (head, refs)) { *nr -= refs;return 0 ; }
arch/x86/mm/gup.c +8 -1
@@ -95,7 +95,10 @@ static noinline int gup_pte_range(pmd_t }VM_BUG_ON (!pfn_valid (pte_pfn (pte))); page =pte_page (pte); -get_page (page); +if (unlikely (!try_get_page (page))) { +pte_unmap (ptep); +return 0 ; + }SetPageReferenced (page); pages[*nr] = page; (*nr)++;
@@ -132,6 +135,8 @@ static noinline int gup_huge_pmd(pmd_t p refs =0 ; head =pmd_page (pmd); +if (WARN_ON_ONCE (page_ref_count (head) <=0 )) +return 0 ; page = head + ((addr & ~PMD_MASK ) >>PAGE_SHIFT ); do { VM_BUG_ON_PAGE(compound_head(page) != head, page);
@@ -208,6 +213,8 @@ static noinline int gup_huge_pud(pud_t p refs =0 ; head =pud_page (pud); +if (WARN_ON_ONCE (page_ref_count (head) <=0 )) +return 0 ; page = head + ((addr & ~PUD_MASK ) >>PAGE_SHIFT ); do { VM_BUG_ON_PAGE(compound_head(page) != head, page);
include/linux/mm.h +5 -0
@@ -488,6 +488,11 @@ static inline void get_huge_page_tail(stextern bool __get_page_tail (struct page *page); +static inline int page_ref_count (struct page *page) +{ +return atomic_read (&page->_count); +} +/* 127: arbitrary random number, small enough to assemble well */ #define page_ref_zero_or_close_to_overflow (page) \ ((unsigned int) atomic_read(&page->_count) + 127u <= 127u)
mm/gup.c +33 -9
84 lines not on this page · raw message
mm/hugetlb.c +15 -1
@@ -3886,6 +3886,7 @@ long follow_hugetlb_page(struct mm_strucunsigned long vaddr = *position;unsigned long remainder = *nr_pages;struct hstate *h =hstate_vma (vma); +int err = -EFAULT ;while (vaddr < vma->vm_end && remainder) {pte_t *pte;
@@ -3957,6 +3958,19 @@ long follow_hugetlb_page(struct mm_struc pfn_offset = (vaddr & ~huge_page_mask (h)) >>PAGE_SHIFT ; page =pte_page (huge_ptep_get (pte)); + +/* +* Instead of doing 'try_get_page_foll()' below in the same_page +* loop, just check the count once here. +*/ +if (unlikely (page_count (page) <=0 )) { +if (pages) { +spin_unlock (ptl); + remainder =0 ; + err = -ENOMEM ; +break ; + } + } same_page:if (pages) { pages[i] =mem_map_offset (page, pfn_offset);
@@ -3983,7 +3997,7 @@ same_page: *nr_pages = remainder; *position = vaddr; -return i ? i : -EFAULT ; +return i ? i : err; } unsigned long hugetlb_change_protection(struct vm_area_struct *vma,
Greg Kroah-Hartman
maintainerPATCH 37/72 pipe: add pipe_buf_get() helper
In reply to Greg Kroah-HartmanFrom: Miklos Szeredi <[email protected]>
commit 7bf2d1df80822ec056363627e2014990f068f7aa upstream.
--- fs/fuse/dev.c | 2 +- fs/splice.c | 4 ++-- include/linux/pipe_fs_i.h | 11 +++++++++++ 3 files changed, 14 insertions(+), 3 deletions(-)
fs/fuse/dev.c +1 -1
@@ -2052,7 +2052,7 @@ static ssize_t fuse_dev_splice_write(str pipe->curbuf = (pipe->curbuf +1 ) & (pipe->buffers -1 ); pipe->nrbufs--; }else { - ibuf->ops->get (pipe, ibuf); +pipe_buf_get (pipe, ibuf); *obuf = *ibuf; obuf->flags &= ~PIPE_BUF_FLAG_GIFT ; obuf->len = rem;
fs/splice.c +2 -2
@@ -1876,7 +1876,7 @@ retry:* Get a reference to this pipe buffer, * so we can copy the contents over. */ - ibuf->ops->get (ipipe, ibuf); +pipe_buf_get (ipipe, ibuf); *obuf = *ibuf;/*
@@ -1948,7 +1948,7 @@ static int link_pipe(struct pipe_inode_i* Get a reference to this pipe buffer, * so we can copy the contents over. */ - ibuf->ops->get (ipipe, ibuf); +pipe_buf_get (ipipe, ibuf); obuf = opipe->bufs + nbuf; *obuf = *ibuf;
include/linux/pipe_fs_i.h +11 -0
@@ -115,6 +115,17 @@ struct pipe_buf_operations {void (*get)(struct pipe_inode_info *,struct pipe_buffer *); }; +/** +* pipe_buf_get - get a reference to a pipe_buffer +* @pipe: the pipe that the buffer belongs to +* @buf: the buffer to get a reference to +*/ +static inline void pipe_buf_get (struct pipe_inode_info *pipe, +struct pipe_buffer *buf) +{ + buf->ops->get (pipe, buf); +} +/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE
Greg Kroah-Hartman
maintainerPATCH 38/72 fs: prevent page refcount overflow in pipe_buf_get
In reply to Greg Kroah-HartmanFrom: Matthew Wilcox <[email protected]>
commit 15fab63e1e57be9fdb5eec1bbc5916e9825e9acb upstream.
Change pipe_buf_get() to return a bool indicating whether it succeeded in raising the refcount of the page (if the thing in the pipe is a page). This removes another mechanism for overflowing the page refcount. All callers converted to handle a failure.
[ 4.4.y backport notes:
Regarding the change in generic_pipe_buf_get(), note that page_cache_get() is the same as get_page(). See mainline commit 09cbfeaf1a5a6 "mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros" for context. ]
--- fs/fuse/dev.c | 12 ++++++------ fs/pipe.c | 4 ++-- fs/splice.c | 12 ++++++++++-- include/linux/pipe_fs_i.h | 10 ++++++---- kernel/trace/trace.c | 6 +++++- 5 files changed, 29 insertions(+), 15 deletions(-)
fs/fuse/dev.c +6 -6
@@ -2031,10 +2031,8 @@ static ssize_t fuse_dev_splice_write(str rem += pipe->bufs[(pipe->curbuf + idx) & (pipe->buffers -1 )].len; ret = -EINVAL ; -if (rem < len) { -pipe_unlock (pipe); - goto out; - } +if (rem < len) + goto out_free; rem = len;while (rem) {
@@ -2052,7 +2050,9 @@ static ssize_t fuse_dev_splice_write(str pipe->curbuf = (pipe->curbuf +1 ) & (pipe->buffers -1 ); pipe->nrbufs--; }else { -pipe_buf_get (pipe, ibuf); +if (!pipe_buf_get (pipe, ibuf)) + goto out_free; + *obuf = *ibuf; obuf->flags &= ~PIPE_BUF_FLAG_GIFT ; obuf->len = rem;
@@ -2075,13 +2075,13 @@ static ssize_t fuse_dev_splice_write(str ret =fuse_dev_do_write (fud, &cs, len);pipe_lock (pipe); +out_free:for (idx =0 ; idx < nbuf; idx++) {struct pipe_buffer *buf = &bufs[idx]; buf->ops->release (pipe, buf); }pipe_unlock (pipe); -out:kfree (bufs);return ret; }
fs/pipe.c +2 -2
@@ -178,9 +178,9 @@ EXPORT_SYMBOL(generic_pipe_buf_steal);* in the tee() system call, when we duplicate the buffers in one * pipe into another. */ -void generic_pipe_buf_get (struct pipe_inode_info *pipe,struct pipe_buffer *buf) +bool generic_pipe_buf_get (struct pipe_inode_info *pipe,struct pipe_buffer *buf) { -page_cache_get (buf->page); +return try_get_page (buf->page); }EXPORT_SYMBOL (generic_pipe_buf_get);
fs/splice.c +10 -2
@@ -1876,7 +1876,11 @@ retry:* Get a reference to this pipe buffer, * so we can copy the contents over. */ -pipe_buf_get (ipipe, ibuf); +if (!pipe_buf_get (ipipe, ibuf)) { +if (ret ==0 ) + ret = -EFAULT ; +break ; + } *obuf = *ibuf;/*
@@ -1948,7 +1952,11 @@ static int link_pipe(struct pipe_inode_i* Get a reference to this pipe buffer, * so we can copy the contents over. */ -pipe_buf_get (ipipe, ibuf); +if (!pipe_buf_get (ipipe, ibuf)) { +if (ret ==0 ) + ret = -EFAULT ; +break ; + } obuf = opipe->bufs + nbuf; *obuf = *ibuf;
include/linux/pipe_fs_i.h +6 -4
@@ -112,18 +112,20 @@ struct pipe_buf_operations {/* * Get a reference to the pipe buffer. */ -void (*get)(struct pipe_inode_info *,struct pipe_buffer *); +bool (*get)(struct pipe_inode_info *,struct pipe_buffer *); };/** * pipe_buf_get - get a reference to a pipe_buffer * @pipe: the pipe that the buffer belongs to * @buf: the buffer to get a reference to +* +* Return: %true if the reference was successfully obtained. */ -static inline void pipe_buf_get (struct pipe_inode_info *pipe, +static inline __must_check bool pipe_buf_get (struct pipe_inode_info *pipe,struct pipe_buffer *buf) { - buf->ops->get (pipe, buf); +return buf->ops->get (pipe, buf); }/* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual
@@ -148,7 +150,7 @@ struct pipe_inode_info *alloc_pipe_info(void free_pipe_info (struct pipe_inode_info *);/* Generic pipe buffer ops functions */ -void generic_pipe_buf_get (struct pipe_inode_info *,struct pipe_buffer *); +bool generic_pipe_buf_get (struct pipe_inode_info *,struct pipe_buffer *);int generic_pipe_buf_confirm (struct pipe_inode_info *,struct pipe_buffer *);int generic_pipe_buf_steal (struct pipe_inode_info *,struct pipe_buffer *);void generic_pipe_buf_release (struct pipe_inode_info *,struct pipe_buffer *);
kernel/trace/trace.c +5 -1
@@ -5749,12 +5749,16 @@ static void buffer_pipe_buf_release(stru buf->private =0 ; } -static void buffer_pipe_buf_get (struct pipe_inode_info *pipe, +static bool buffer_pipe_buf_get (struct pipe_inode_info *pipe,struct pipe_buffer *buf) {struct buffer_ref *ref = (struct buffer_ref *)buf->private; +if (ref->ref >INT_MAX /2 ) +return false; + ref->ref++; +return true; }/* Pipe buffer operations for a buffer. */
Greg Kroah-Hartman
maintainerPATCH 39/72 audit: always check the netlink payload length in audit_receive_msg()
In reply to Greg Kroah-HartmanFrom: Paul Moore <[email protected]>
[ Upstream commit 756125289285f6e55a03861bf4b6257aa3d19a93 ]
This patch ensures that we always check the netlink payload length in audit_receive_msg() before we take any action on the payload itself.
--- kernel/audit.c | 40 +++++++++++++++++++++------------------- 1 file changed, 21 insertions(+), 19 deletions(-)
kernel/audit.c +21 -19
@@ -753,13 +753,11 @@ static void audit_log_feature_change(int which, u32 old_feature, u32 new_featureaudit_log_end (ab); } -static int audit_set_feature (struct sk_buff *skb) +static int audit_set_feature (struct audit_features *uaf) { -struct audit_features *uaf;int i;BUILD_BUG_ON (AUDIT_LAST_FEATURE +1 >ARRAY_SIZE (audit_feature_names)); - uaf =nlmsg_data (nlmsg_hdr (skb));/* if there is ever a version 2 we should handle that here */
@@ -815,6 +813,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) {u32 seq;void *data; +int data_len;int err;struct audit_buffer *ab;u16 msg_type = nlh->nlmsg_type;
@@ -838,6 +837,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) } seq = nlh->nlmsg_seq; data =nlmsg_data (nlh); + data_len =nlmsg_len (nlh);switch (msg_type) {case AUDIT_GET : {
@@ -859,7 +859,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)struct audit_status s;memset (&s,0 ,sizeof (s));/* guard against past and future API changes */ -memcpy (&s, data,min_t (size_t,sizeof (s),nlmsg_len (nlh))); +memcpy (&s, data,min_t (size_t,sizeof (s), data_len));if (s.mask &AUDIT_STATUS_ENABLED ) { err =audit_set_enabled (s.enabled);if (err <0 )
@@ -908,7 +908,9 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)return err;break ;case AUDIT_SET_FEATURE : - err =audit_set_feature (skb); +if (data_len <sizeof (struct audit_features )) +return -EINVAL ; + err =audit_set_feature (data);if (err)return err;break ;
@@ -920,6 +922,8 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) err =audit_filter_user (msg_type);if (err ==1 ) {/* match or error */ +char *str = data; + err =0 ;if (msg_type ==AUDIT_USER_TTY ) { err =tty_audit_push_current ();
@@ -928,19 +932,17 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) }mutex_unlock (&audit_cmd_mutex);audit_log_common_recv_msg (&ab, msg_type); -if (msg_type !=AUDIT_USER_TTY ) +if (msg_type !=AUDIT_USER_TTY ) { +/* ensure NULL termination */ + str[data_len -1 ] ='\0' ;audit_log_format (ab," msg='%.*s'" ,AUDIT_MESSAGE_TEXT_MAX , - (char *)data); -else { -int size; - + str); + }else {audit_log_format (ab," data=" ); - size =nlmsg_len (nlh); -if (size >0 && - ((unsigned char *)data)[size -1 ] =='\0' ) - size--; -audit_log_n_untrustedstring (ab, data, size); +if (data_len >0 && str[data_len -1 ] =='\0' ) + data_len--; +audit_log_n_untrustedstring (ab, str, data_len); }audit_set_portid (ab,NETLINK_CB (skb).portid);audit_log_end (ab);
@@ -949,7 +951,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)break ;case AUDIT_ADD_RULE :case AUDIT_DEL_RULE : -if (nlmsg_len (nlh) <sizeof (struct audit_rule_data )) +if (data_len <sizeof (struct audit_rule_data ))return -EINVAL ;if (audit_enabled ==AUDIT_LOCKED ) {audit_log_common_recv_msg (&ab,AUDIT_CONFIG_CHANGE );
@@ -958,7 +960,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)return -EPERM ; } err =audit_rule_change (msg_type,NETLINK_CB (skb).portid, - seq, data,nlmsg_len (nlh)); + seq, data, data_len);break ;case AUDIT_LIST_RULES : err =audit_list_rules_send (skb, seq);
@@ -972,7 +974,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)case AUDIT_MAKE_EQUIV : {void *bufp = data;u32 sizes[2 ]; -size_t msglen =nlmsg_len (nlh); +size_t msglen = data_len;char *old, *new; err = -EINVAL ;
@@ -1049,7 +1051,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)memset (&s,0 ,sizeof (s));/* guard against past and future API changes */ -memcpy (&s, data,min_t (size_t,sizeof (s),nlmsg_len (nlh))); +memcpy (&s, data,min_t (size_t,sizeof (s), data_len));/* check if new data is valid */ if ((s.enabled !=0 && s.enabled !=1 ) || (s.log_passwd !=0 && s.log_passwd !=1 ))
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 40/72 serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
In reply to Greg Kroah-HartmanFrom: Daniel Golle <[email protected]>
[ Upstream commit 87c5cbf71ecbb9e289d60a2df22eb686c70bf196 ]
On AR934x this UART is usually not initialized by the bootloader as it is only used as a secondary serial port while the primary UART is a newly introduced NS16550-compatible.
In order to make use of the ar933x-uart on AR934x without RTS/CTS hardware flow control, one needs to set the UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this UART is used as primary/console, the bootloader on AR934x typically doesn't set those bits.
Setting them explicitely on AR933x should not do any harm, so just set them unconditionally.
--- drivers/tty/serial/ar933x_uart.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/tty/serial/ar933x_uart.c +8 -0
@@ -294,6 +294,10 @@ static void ar933x_uart_set_termios(struct uart_port *port,ar933x_uart_rmw_set (up,AR933X_UART_CS_REG ,AR933X_UART_CS_HOST_INT_EN ); +/* enable RX and TX ready overide */ +ar933x_uart_rmw_set (up,AR933X_UART_CS_REG , +AR933X_UART_CS_TX_READY_ORIDE |AR933X_UART_CS_RX_READY_ORIDE ); +/* reenable the UART */ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
@@ -426,6 +430,10 @@ static int ar933x_uart_startup(struct uart_port *port)ar933x_uart_rmw_set (up,AR933X_UART_CS_REG ,AR933X_UART_CS_HOST_INT_EN ); +/* enable RX and TX ready overide */ +ar933x_uart_rmw_set (up,AR933X_UART_CS_REG , +AR933X_UART_CS_TX_READY_ORIDE |AR933X_UART_CS_RX_READY_ORIDE ); +/* Enable RX interrupts */ up->ier =AR933X_UART_INT_RX_VALID ;ar933x_uart_write (up,AR933X_UART_INT_EN_REG , up->ier);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 41/72 usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
In reply to Greg Kroah-HartmanFrom: Lars-Peter Clausen <[email protected]>
[ Upstream commit 43d565727a3a6fd24e37c7c2116475106af71806 ]
ffs_aio_cancel() can be called from both interrupt and thread context. Make sure that the current IRQ state is saved and restored by using spin_{un,}lock_irq{save,restore}().
Otherwise undefined behavior might occur.
--- drivers/usb/gadget/function/f_fs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/f_fs.c +3 -2
@@ -888,18 +888,19 @@ static int ffs_aio_cancel(struct kiocb *kiocb) {struct ffs_io_data *io_data = kiocb->private;struct ffs_epfile *epfile = kiocb->ki_filp->private_data; +unsigned long flags;int value;ENTER (); -spin_lock_irq (&epfile->ffs->eps_lock); +spin_lock_irqsave (&epfile->ffs->eps_lock, flags);if (likely (io_data && io_data->ep && io_data->req)) value =usb_ep_dequeue (io_data->ep, io_data->req);else value = -EINVAL ; -spin_unlock_irq (&epfile->ffs->eps_lock); +spin_unlock_irqrestore (&epfile->ffs->eps_lock, flags);return value; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 42/72 usb: gadget: serial: fix Tx stall after buffer overflow
In reply to Greg Kroah-HartmanFrom: Sergey Organov <[email protected]>
[ Upstream commit e4bfded56cf39b8d02733c1e6ef546b97961e18a ]
Symptom: application opens /dev/ttyGS0 and starts sending (writing) to it while either USB cable is not connected, or nobody listens on the other side of the cable. If driver circular buffer overflows before connection is established, no data will be written to the USB layer until/unless /dev/ttyGS0 is closed and re-opened again by the application (the latter besides having no means of being notified about the event of establishing of the connection.)
Fix: on open and/or connect, kick Tx to flush circular buffer data to USB layer.
--- drivers/usb/gadget/function/u_serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/gadget/function/u_serial.c +3 -1
@@ -701,8 +701,10 @@ static int gs_start_io(struct gs_port *port) port->n_read =0 ; started =gs_start_rx (port); -/* unblock any pending writes into our circular buffer */ if (started) { +gs_start_tx (port); +/* Unblock any pending writes into our circular buffer, in case +* we didn't in gs_start_tx() */ tty_wakeup (port->port.tty); }else {gs_free_requests (ep, head, &port->read_allocated);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 43/72 drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
In reply to Greg Kroah-HartmanFrom: John Stultz <[email protected]>
[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ]
I was hitting kCFI crashes when building with clang, and after some digging finally narrowed it down to the dsi_mgr_connector_mode_valid() function being implemented as returning an int, instead of an enum drm_mode_status.
This patch fixes it, and appeases the opaque word of the kCFI gods (seriously, clang inlining everything makes the kCFI backtraces only really rough estimates of where things went wrong).
Thanks as always to Sami for his help narrowing this down.
--- drivers/gpu/drm/msm/dsi/dsi_manager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/msm/dsi/dsi_manager.c +1 -1
@@ -302,7 +302,7 @@ static int dsi_mgr_connector_get_modes(struct drm_connector *connector)return num; } -static int dsi_mgr_connector_mode_valid (struct drm_connector *connector, +static enum drm_mode_status dsi_mgr_connector_mode_valid (struct drm_connector *connector,struct drm_display_mode *mode) {int id =dsi_mgr_connector_get_id (connector);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 44/72 drm/msm/dsi: save pll state before dsi host is powered off
In reply to Greg Kroah-HartmanFrom: Harigovindan P <[email protected]>
[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ]
Save pll state before dsi host is powered off. Without this change some register values gets resetted.
--- drivers/gpu/drm/msm/dsi/dsi_manager.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/msm/dsi/dsi_manager.c +5 -0
@@ -434,6 +434,7 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge)struct msm_dsi *msm_dsi1 =dsi_mgr_get_dsi (DSI_1 );struct mipi_dsi_host *host = msm_dsi->host;struct drm_panel *panel = msm_dsi->panel; +struct msm_dsi_pll *src_pll;bool is_dual_dsi =IS_DUAL_DSI ();int ret;
@@ -467,6 +468,10 @@ static void dsi_mgr_bridge_post_disable(struct drm_bridge *bridge) id, ret); } +/* Save PLL status if it is a clock source */ + src_pll =msm_dsi_phy_get_pll (msm_dsi->phy); +msm_dsi_pll_save_state (src_pll); + ret =msm_dsi_host_power_off (host);if (ret)pr_err ("%s: host %d power off failed,%d\n" , __func__, id, ret);
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 45/72 net: ks8851-ml: Remove 8-bit bus accessors
In reply to Greg Kroah-HartmanFrom: Marek Vasut <[email protected]>
[ Upstream commit 69233bba6543a37755158ca3382765387b8078df ]
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown, however the speculation is that this was some sort of attempt to support the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the 8-bit accessors are internally 16-bit registers, so reading them using 16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read outright, as it is already a concatenation of two 8-bit reads of that register. The KS_RXQCR accesses are 8-bit only, however writing the top 8 bits of the register is OK as well, since the driver caches the entire 16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now. The only hardware available to me is one with 16-bit bus, so I have no way to test the 8-bit bus mode, however it is unlikely this ever really worked anyway. If the 8-bit bus mode is ever required, it can be easily added by adjusting the 16-bit accessors to do 2 consecutive accesses, which is how this should have been done from the beginning.
--- drivers/net/ethernet/micrel/ks8851_mll.c | 45 +++--------------------- 1 file changed, 5 insertions(+), 40 deletions(-)
drivers/net/ethernet/micrel/ks8851_mll.c +5 -40
@@ -474,24 +474,6 @@ static int msg_enable;* chip is busy transferring packet data (RX/TX FIFO accesses). */ -/** -* ks_rdreg8 - read 8 bit register from device -* @ks : The chip information -* @offset: The register address -* -* Read a 8bit register from the chip, returning the result -*/ -static u8 ks_rdreg8 (struct ks_net *ks,int offset) -{ -u16 data; -u8 shift_bit = offset &0x03 ; -u8 shift_data = (offset &1 ) <<3 ; - ks->cmd_reg_cache = (u16 ) offset | (u16)(BE0 << shift_bit); -iowrite16 (ks->cmd_reg_cache, ks->hw_addr_cmd); - data =ioread16 (ks->hw_addr); -return (u8)(data >> shift_data); -} -/** * ks_rdreg16 - read 16 bit register from device * @ks : The chip information
@@ -507,22 +489,6 @@ static u16 ks_rdreg16(struct ks_net *ks, int offset)return ioread16 (ks->hw_addr); } -/** -* ks_wrreg8 - write 8bit register value to chip -* @ks: The chip information -* @offset: The register address -* @value: The value to write -* -*/ -static void ks_wrreg8 (struct ks_net *ks,int offset,u8 value) -{ -u8 shift_bit = (offset &0x03 ); -u16 value_write = (u16)(value << ((offset &1 ) <<3 )); - ks->cmd_reg_cache = (u16 )offset | (BE0 << shift_bit); -iowrite16 (ks->cmd_reg_cache, ks->hw_addr_cmd); -iowrite16 (value_write, ks->hw_addr); -} -/** * ks_wrreg16 - write 16bit register value to chip * @ks: The chip information
@@ -642,8 +608,7 @@ static void ks_read_config(struct ks_net *ks)u16 reg_data =0 ;/* Regardless of bus width, 8 bit read should always work.*/ - reg_data =ks_rdreg8 (ks,KS_CCR ) &0x00FF ; - reg_data |=ks_rdreg8 (ks,KS_CCR +1 ) <<8 ; + reg_data =ks_rdreg16 (ks,KS_CCR );/* addr/data bus are multiplexed */ ks->sharedbus = (reg_data &CCR_SHARED ) ==CCR_SHARED ;
@@ -747,7 +712,7 @@ static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)/* 1. set sudo DMA mode */ ks_wrreg16 (ks,KS_RXFDPR ,RXFDPR_RXFPAI ); -ks_wrreg8 (ks,KS_RXQCR , (ks->rc_rxqcr |RXQCR_SDA ) &0xff ); +ks_wrreg16 (ks,KS_RXQCR , ks->rc_rxqcr |RXQCR_SDA );/* 2. read prepend data */ /**
@@ -764,7 +729,7 @@ static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)ks_inblk (ks, buf,ALIGN (len,4 ));/* 4. reset sudo DMA Mode */ -ks_wrreg8 (ks,KS_RXQCR , ks->rc_rxqcr); +ks_wrreg16 (ks,KS_RXQCR , ks->rc_rxqcr); }/**
@@ -997,13 +962,13 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) ks->txh.txw[1 ] =cpu_to_le16 (len);/* 1. set sudo-DMA mode */ -ks_wrreg8 (ks,KS_RXQCR , (ks->rc_rxqcr |RXQCR_SDA ) &0xff ); +ks_wrreg16 (ks,KS_RXQCR , ks->rc_rxqcr |RXQCR_SDA );/* 2. write status/lenth info */ ks_outblk (ks, ks->txh.txw,4 );/* 3. write pkt data */ ks_outblk (ks, (u16 *)pdata,ALIGN (len,4 ));/* 4. reset sudo-DMA mode */ -ks_wrreg8 (ks,KS_RXQCR , ks->rc_rxqcr); +ks_wrreg16 (ks,KS_RXQCR , ks->rc_rxqcr);/* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ ks_wrreg16 (ks,KS_TXQCR ,TXQCR_METFE );/* 6. wait until TXQCR_METFE is auto-cleared */
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 46/72 net: ks8851-ml: Fix 16-bit data access
In reply to Greg Kroah-HartmanFrom: Marek Vasut <[email protected]>
[ Upstream commit edacb098ea9c31589276152f09b4439052c0f2b1 ]
The packet data written to and read from Micrel KSZ8851-16MLLI must be byte-swapped in 16-bit mode, add this byte-swapping.
--- drivers/net/ethernet/micrel/ks8851_mll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/micrel/ks8851_mll.c +2 -2
@@ -515,7 +515,7 @@ static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len) { len >>=1 ;while (len--) - *wptr++ = (u16 )ioread16 (ks->hw_addr); + *wptr++ =be16_to_cpu (ioread16 (ks->hw_addr)); }/**
@@ -529,7 +529,7 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) { len >>=1 ;while (len--) -iowrite16 (*wptr++, ks->hw_addr); +iowrite16 (cpu_to_be16 (*wptr++), ks->hw_addr); }static void ks_disable_int (struct ks_net *ks)
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 47/72 net: ks8851-ml: Fix 16-bit IO operation
In reply to Greg Kroah-HartmanFrom: Marek Vasut <[email protected]>
[ Upstream commit 58292104832fef6cb4a89f736012c0e0724c3442 ]
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that BE[3:0] signals are active high. This contradicts the measurements of the behavior of the actual chip, where these signals behave as active low. For example, to read the CIDER register, the bus must expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
--- drivers/net/ethernet/micrel/ks8851_mll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/micrel/ks8851_mll.c +2 -2
@@ -484,7 +484,7 @@ static int msg_enable;static u16 ks_rdreg16 (struct ks_net *ks,int offset) { - ks->cmd_reg_cache = (u16 )offset | ((BE1 |BE0 ) << (offset &0x02 )); + ks->cmd_reg_cache = (u16 )offset | ((BE3 |BE2 ) >> (offset &0x02 ));iowrite16 (ks->cmd_reg_cache, ks->hw_addr_cmd);return ioread16 (ks->hw_addr); }
@@ -499,7 +499,7 @@ static u16 ks_rdreg16(struct ks_net *ks, int offset)static void ks_wrreg16 (struct ks_net *ks,int offset,u16 value) { - ks->cmd_reg_cache = (u16 )offset | ((BE1 |BE0 ) << (offset &0x02 )); + ks->cmd_reg_cache = (u16 )offset | ((BE3 |BE2 ) >> (offset &0x02 ));iowrite16 (ks->cmd_reg_cache, ks->hw_addr_cmd);iowrite16 (value, ks->hw_addr); }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 48/72 watchdog: da9062: do not ping the hw during stop()
In reply to Greg Kroah-HartmanFrom: Marco Felsch <[email protected]>
[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ]
The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too.
--- drivers/watchdog/da9062_wdt.c | 7 ------- 1 file changed, 7 deletions(-)
drivers/watchdog/da9062_wdt.c +0 -7
@@ -126,13 +126,6 @@ static int da9062_wdt_stop(struct watchdog_device *wdd)struct da9062_watchdog *wdt =watchdog_get_drvdata (wdd);int ret; - ret =da9062_reset_watchdog_timer (wdt); -if (ret) { -dev_err (wdt->hw->dev,"Failed to ping the watchdog (err = %d)\n" , - ret); -return ret; - } - ret = regmap_update_bits(wdt->hw->regmap, DA9062AA_CONTROL_D, DA9062AA_TWDSCALE_MASK,
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 49/72 s390/cio: cio_ignore_proc_seq_next should increase position index
In reply to Greg Kroah-HartmanFrom: Vasily Averin <[email protected]>
[ Upstream commit 8b101a5e14f2161869636ff9cb4907b7749dc0c2 ]
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output.
--- drivers/s390/cio/blacklist.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/s390/cio/blacklist.c +3 -2
@@ -303,8 +303,10 @@ static void * cio_ignore_proc_seq_next(struct seq_file *s, void *it, loff_t *offset) { struct ccwdev_iter *iter; +loff_t p = *offset; -if (*offset >= (__MAX_SUBCHANNEL +1 ) * (__MAX_SSID +1 )) + (*offset)++; +if (p >= (__MAX_SUBCHANNEL +1 ) * (__MAX_SSID +1 ))return NULL ; iter = it;if (iter->devno == __MAX_SUBCHANNEL) {
@@ -314,7 +316,6 @@ cio_ignore_proc_seq_next(struct seq_file *s, void *it, loff_t *offset)return NULL ; }else iter->devno++; - (*offset)++;return iter; }
Signature · 1 line
2.20.1
Greg Kroah-Hartman
maintainerPATCH 50/72 cifs: dont leak -EAGAIN for stat() during reconnect
In reply to Greg Kroah-HartmanFrom: Ronnie Sahlberg <[email protected]>
commit fc513fac56e1b626ae48a74d7551d9c35c50129e upstream.
If from cifs_revalidate_dentry_attr() the SMB2/QUERY_INFO call fails with an error, such as STATUS_SESSION_EXPIRED, causing the session to be reconnected it is possible we will leak -EAGAIN back to the application even for system calls such as stat() where this is not a valid error.
Fix this by re-trying the operation from within cifs_revalidate_dentry_attr() if cifs_get_inode_info*() returns -EAGAIN.
This fixes stat() and possibly also other system calls that uses cifs_revalidate_dentry*().
--- fs/cifs/inode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
fs/cifs/inode.c +5 -1
@@ -1957,6 +1957,7 @@ int cifs_revalidate_dentry_attr(struct dstruct inode *inode =d_inode (dentry);struct super_block *sb = dentry->d_sb;char *full_path =NULL ; +int count =0 ;if (inode ==NULL )return -ENOENT ;
@@ -1978,15 +1979,18 @@ int cifs_revalidate_dentry_attr(struct d full_path, inode, inode->i_count.counter, dentry, dentry->d_time, jiffies); +again:if (cifs_sb_master_tcon (CIFS_SB (sb))->unix_ext) rc =cifs_get_inode_info_unix (&inode, full_path, sb, xid);else rc =cifs_get_inode_info (&inode, full_path,NULL , sb, xid,NULL ); - +if (rc == -EAGAIN && count++ <10 ) + goto again; out:kfree (full_path);free_xid (xid); +return rc; }
Greg Kroah-Hartman
maintainerPATCH 51/72 usb: storage: Add quirk for Samsung Fit flash
In reply to Greg Kroah-HartmanFrom: Jim Lin <[email protected]>
commit 86d92f5465958752481269348d474414dccb1552 upstream.
Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors, e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors
If data access times out, driver error handling will issue a port reset.
Sometimes Samsung Fit (090C:1000) flash disk will not respond to later Set Address or Get Descriptor command.
Adding this quirk to limit max_sectors to 64 sectors to avoid issue occurring.
--- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/usb/storage/unusual_devs.h +6 -0
@@ -1206,6 +1206,12 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9 USB_SC_RBC, USB_PR_BULK, NULL, 0 ), +UNUSUAL_DEV (0x090c ,0x1000 ,0x1100 ,0x1100 , +"Samsung" , +"Flash Drive FIT" , +USB_SC_DEVICE ,USB_PR_DEVICE ,NULL , +US_FL_MAX_SECTORS_64 ), +/* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya",
Greg Kroah-Hartman
maintainerPATCH 52/72 usb: quirks: add NO_LPM quirk for Logitech Screen Share
In reply to Greg Kroah-HartmanFrom: Dan Lazewatsky <[email protected]>
commit b96ed52d781a2026d0c0daa5787c6f3d45415862 upstream.
LPM on the device appears to cause xHCI host controllers to claim that there isn't enough bandwidth to support additional devices.
--- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/core/quirks.c +3 -0
@@ -86,6 +86,9 @@ static const struct usb_device_id usb_qu/* Logitech PTZ Pro Camera */ { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Logitech Screen Share */ + { USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
Greg Kroah-Hartman
maintainerPATCH 53/72 usb: core: hub: do error out if usb_autopm_get_interface() fails
In reply to Greg Kroah-HartmanFrom: Eugeniu Rosca <[email protected]>
commit 60e3f6e4ac5b0fda43dad01c32e09409ec710045 upstream.
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]:
Quoted 5 lines · Alan Stern
A revised search finds line 997 in
drivers/usb/core/hub.cand lines 216, 269 indrivers/usb/core/port.c. (I didn't try looking in any other directories.) AFAICT all three of these should check the return value, although a error message in the kernel log probably isn't needed.
Factor out the usb_remove_device() change into a standalone patch to allow conflict-free integration on top of the earliest stable branches.
[1] https://lore.kernel.org/lkml/[email protected]
--- drivers/usb/core/hub.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/usb/core/hub.c +5 -1
@@ -938,13 +938,17 @@ int usb_remove_device(struct usb_device {struct usb_hub *hub;struct usb_interface *intf; +int ret;if (!udev->parent)/* Can't remove a root hub */ return -EINVAL ; hub =usb_hub_to_struct_hub (udev->parent); intf =to_usb_interface (hub->intfdev); -usb_autopm_get_interface (intf); + ret =usb_autopm_get_interface (intf); +if (ret <0 ) +return ret; +set_bit (udev->portnum, hub->removed_bits);hub_port_logical_disconnect (hub, udev->portnum);usb_autopm_put_interface (intf);
Greg Kroah-Hartman
maintainerPATCH 54/72 usb: core: port: do error out if usb_autopm_get_interface() fails
In reply to Greg Kroah-HartmanFrom: Eugeniu Rosca <[email protected]>
commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.
Reviewing a fresh portion of coverity defects in USB core (specifically CID 1458999), Alan Stern noted below in [1]:
Quoted 5 lines · Alan Stern
A revised search finds line 997 in
drivers/usb/core/hub.cand lines 216, 269 indrivers/usb/core/port.c. (I didn't try looking in any other directories.) AFAICT all three of these should check the return value, although a error message in the kernel log probably isn't needed.
Factor out the usb_port_runtime_{resume,suspend}() changes into a standalone patch to allow conflict-free porting on top of stable v3.9+.
[1] https://lore.kernel.org/lkml/[email protected]
--- drivers/usb/core/port.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/usb/core/port.c +8 -2
@@ -98,7 +98,10 @@ static int usb_port_runtime_resume(strucif (!port_dev->is_superspeed && peer)pm_runtime_get_sync (&peer->dev); -usb_autopm_get_interface (intf); + retval =usb_autopm_get_interface (intf); +if (retval <0 ) +return retval; + retval =usb_hub_set_port_power (hdev, hub, port1, true);msleep (hub_power_on_good_delay (hub));if (udev && !retval) {
@@ -151,7 +154,10 @@ static int usb_port_runtime_suspend(struif (usb_port_block_power_off)return -EBUSY ; -usb_autopm_get_interface (intf); + retval =usb_autopm_get_interface (intf); +if (retval <0 ) +return retval; + retval =usb_hub_set_port_power (hdev, hub, port1, false);usb_clear_port_feature (hdev, port1,USB_PORT_FEAT_C_CONNECTION );if (!port_dev->is_superspeed)
Greg Kroah-Hartman
maintainerPATCH 55/72 vgacon: Fix a UAF in vgacon_invert_region
In reply to Greg Kroah-HartmanFrom: Zhang Xiaoxu <[email protected]>
commit 513dc792d6060d5ef572e43852683097a8420f56 upstream.
When syzkaller tests, there is a UAF:
BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr
ffff880000100000
Read of size 2 by task syz-executor.1/16489
page:ffffea0000004000 count:0 mapcount:-127 mapping: (null)
index:0x0
page flags: 0xfffff00000000()
page dumped because: kasan: bad access detected
CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
[<ffffffffb119f309>] dump_stack+0x1e/0x20
[<ffffffffb04af957>] kasan_report+0x577/0x950
[<ffffffffb04ae652>] __asan_load2+0x62/0x80
[<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110
[<ffffffffb0a39d95>] invert_screen+0xe5/0x470
[<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0
[<ffffffffb0a3bfae>] tioclinux+0xee/0x490
[<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670
[<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10
[<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40
[<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170
[<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27
Memory state around the buggy address:
ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00
ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00
>ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ffIt can be reproduce in the linux mainline by the program:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <linux/vt.h>
struct tiocl_selection {
unsigned short xs; /* X start */
unsigned short ys; /* Y start */
unsigned short xe; /* X end */
unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */
};
#define TIOCL_SETSEL 2
struct tiocl {
unsigned char type;
unsigned char pad;
struct tiocl_selection sel;
};
int main()
{
int fd = 0;
const char *dev = "/dev/char/4:1"; struct vt_consize v = {0};
struct tiocl tioc = {0};
fd = open(dev, O_RDWR, 0);
v.v_rows = 3346;
ioctl(fd, VT_RESIZEX, &v);
tioc.type = TIOCL_SETSEL;
ioctl(fd, TIOCLINUX, &tioc);
return 0;}
When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access.
Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen.
So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647.
Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits:
if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL;
Reference: CVE-2020-8647 and CVE-2020-8649
--- drivers/video/console/vgacon.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/video/console/vgacon.c +3 -0
@@ -1330,6 +1330,9 @@ static int vgacon_font_get(struct vc_datstatic int vgacon_resize (struct vc_data *c,unsigned int width,unsigned int height,unsigned int user) { +if ((width <<1 ) * height > vga_vram_size) +return -EINVAL ; +if (width %2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ c->vc_font.height)
Greg Kroah-Hartman
maintainerPATCH 56/72 fat: fix uninit-memory access for partial initialized inode
In reply to Greg Kroah-HartmanFrom: OGAWA Hirofumi <[email protected]>
commit bc87302a093f0eab45cd4e250c2021299f712ec6 upstream.
When get an error in the middle of reading an inode, some fields in the inode might be still not initialized. And then the evict_inode path may access those fields via iput().
To fix, this makes sure that inode fields are initialized.
--- fs/fat/inode.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-)
fs/fat/inode.c +7 -12
@@ -653,6 +653,13 @@ static struct inode *fat_alloc_inode(strreturn NULL ;init_rwsem (&ei->truncate_lock); +/* Zeroing to allow iput() even if partial initialized inode. */ + ei->mmu_private =0 ; + ei->i_start =0 ; + ei->i_logstart =0 ; + ei->i_attrs =0 ; + ei->i_pos =0 ; +return &ei->vfs_inode; }
@@ -1276,16 +1283,6 @@ out:return 0 ; } -static void fat_dummy_inode_init (struct inode *inode) -{ -/* Initialize this dummy inode to work as no-op. */ -MSDOS_I (inode)->mmu_private =0 ; -MSDOS_I (inode)->i_start =0 ; -MSDOS_I (inode)->i_logstart =0 ; -MSDOS_I (inode)->i_attrs =0 ; -MSDOS_I (inode)->i_pos =0 ; -} -static int fat_read_root (struct inode *inode) {struct msdos_sb_info *sbi =MSDOS_SB (inode->i_sb);
@@ -1730,13 +1727,11 @@ int fat_fill_super(struct super_block *s fat_inode =new_inode (sb);if (!fat_inode) goto out_fail; -fat_dummy_inode_init (fat_inode); sbi->fat_inode = fat_inode; fsinfo_inode =new_inode (sb);if (!fsinfo_inode) goto out_fail; -fat_dummy_inode_init (fsinfo_inode); fsinfo_inode->i_ino =MSDOS_FSINFO_INO ; sbi->fsinfo_inode = fsinfo_inode;insert_inode_hash (fsinfo_inode);
Greg Kroah-Hartman
maintainerPATCH 57/72 vt: selection, close sel_buffer race
In reply to Greg Kroah-HartmanFrom: Jiri Slaby <[email protected]>
commit 07e6124a1a46b4b5a9b3cacc0c306b50da87abf5 upstream.
syzkaller reported this UAF:
BUG: KASAN: use-after-free in n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 Read of size 1 at addr ffff8880089e40e9 by task syz-executor.1/13184 CPU: 0 PID: 13184 Comm: syz-executor.1 Not tainted 5.4.7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: ... kasan_report+0xe/0x20 mm/kasan/common.c:634 n_tty_receive_buf_common+0x2481/0x2940 drivers/tty/n_tty.c:1741 tty_ldisc_receive_buf+0xac/0x190 drivers/tty/tty_buffer.c:461 paste_selection+0x297/0x400 drivers/tty/vt/selection.c:372 tioclinux+0x20d/0x4e0 drivers/tty/vt/vt.c:3044 vt_ioctl+0x1bcf/0x28d0 drivers/tty/vt/vt_ioctl.c:364 tty_ioctl+0x525/0x15a0 drivers/tty/tty_io.c:2657 vfs_ioctl fs/ioctl.c:47 [inline]
It is due to a race between parallel paste_selection (TIOCL_PASTESEL) and set_selection_user (TIOCL_SETSEL) invocations. One uses sel_buffer, while the other frees it and reallocates a new one for another selection. Add a mutex to close this race.
The mutex takes care properly of sel_buffer and sel_buffer_lth only. The other selection global variables (like sel_start, sel_end, and sel_cons) are protected only in set_selection_user. The other functions need quite some more work to close the races of the variables there. This is going to happen later.
This likely fixes (I am unsure as there is no reproducer provided) bug 206361 too. It was marked as CVE-2020-8648.
--- drivers/tty/vt/selection.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/tty/vt/selection.c +15 -6
@@ -13,6 +13,7 @@#include <linux/tty.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/types.h>
@@ -40,6 +41,7 @@ static volatile int sel_start = -1; /*static int sel_end;static int sel_buffer_lth;static char *sel_buffer; +static DEFINE_MUTEX (sel_lock);/* clear_selection, highlight and highlight_pointer can be called from interrupt (via scrollback/front) */
@@ -163,7 +165,7 @@ int set_selection(const struct tiocl_selchar *bp, *obp;int i, ps, pe, multiplier;u16 c; -int mode; +int mode, ret =0 ;poke_blanked_console ();
@@ -203,6 +205,7 @@ int set_selection(const struct tiocl_sel pe = tmp; } +mutex_lock (&sel_lock);if (sel_cons != vc_cons[fg_console].d) {clear_selection (); sel_cons = vc_cons[fg_console].d;
@@ -248,9 +251,10 @@ int set_selection(const struct tiocl_selbreak ;case TIOCL_SELPOINTER :highlight_pointer (pe); -return 0 ; + goto unlock;default : -return -EINVAL ; + ret = -EINVAL ; + goto unlock; }/* remove the pointer */
@@ -272,7 +276,7 @@ int set_selection(const struct tiocl_selelse if (new_sel_start == sel_start) {if (new_sel_end == sel_end)/* no action required */ -return 0 ; + goto unlock;else if (new_sel_end > sel_end)/* extend to right */ highlight (sel_end +2 , new_sel_end);else /* contract from right */
@@ -299,7 +303,8 @@ int set_selection(const struct tiocl_selif (!bp) {printk (KERN_WARNING "selection: kmalloc() failed\n" );clear_selection (); -return -ENOMEM ; + ret = -ENOMEM ; + goto unlock; }kfree (sel_buffer); sel_buffer = bp;
@@ -324,7 +329,9 @@ int set_selection(const struct tiocl_sel } } sel_buffer_lth = bp - sel_buffer; -return 0 ; +unlock: +mutex_unlock (&sel_lock); +return ret; }/* Insert the contents of the selection buffer into the
@@ -350,6 +357,7 @@ int paste_selection(struct tty_struct *ttty_buffer_lock_exclusive (&vc->port);add_wait_queue (&vc->paste_wait, &wait); +mutex_lock (&sel_lock);while (sel_buffer && sel_buffer_lth > pasted) {set_current_state (TASK_INTERRUPTIBLE );if (test_bit (TTY_THROTTLED , &tty->flags)) {
@@ -362,6 +370,7 @@ int paste_selection(struct tty_struct *t count); pasted += count; } +mutex_unlock (&sel_lock);remove_wait_queue (&vc->paste_wait, &wait);__set_current_state (TASK_RUNNING );
Greg Kroah-Hartman
maintainerPATCH 58/72 vt: selection, push console lock down
In reply to Greg Kroah-HartmanFrom: Jiri Slaby <[email protected]>
commit 4b70dd57a15d2f4685ac6e38056bad93e81e982f upstream.
We need to nest the console lock in sel_lock, so we have to push it down a bit. Fortunately, the callers of set_selection_* just lock the console lock around the function call. So moving it down is easy.
In the next patch, we switch the order.
--- drivers/tty/vt/selection.c | 13 ++++++++++++- drivers/tty/vt/vt.c | 2 -- 2 files changed, 12 insertions(+), 3 deletions(-)
drivers/tty/vt/selection.c +12 -1
@@ -158,7 +158,7 @@ static int store_utf8(u16 c, char *p)* The entire selection process is managed under the console_lock. It's * a lot under the lock but its hardly a performance path */ -int set_selection (const struct tiocl_selection __user *sel,struct tty_struct *tty) +static int __set_selection (const struct tiocl_selection __user *sel,struct tty_struct *tty) {struct vc_data *vc = vc_cons[fg_console].d;int sel_mode, new_sel_start, new_sel_end, spc;
@@ -334,6 +334,17 @@ unlock:return ret; } +int set_selection (const struct tiocl_selection __user *v,struct tty_struct *tty) +{ +int ret; + +console_lock (); + ret =__set_selection (v, tty); +console_unlock (); + +return ret; +} +/* Insert the contents of the selection buffer into the * queue of the tty associated with the current console. * Invoked by ioctl().
drivers/tty/vt/vt.c +0 -2
@@ -2687,9 +2687,7 @@ int tioclinux(struct tty_struct *tty, unswitch (type) {case TIOCL_SETSEL : -console_lock (); ret =set_selection ((struct tiocl_selection __user *)(p+1 ), tty); -console_unlock ();break ;case TIOCL_PASTESEL : ret =paste_selection (tty);
Greg Kroah-Hartman
maintainerPATCH 59/72 vt: selection, push sel_lock up
In reply to Greg Kroah-HartmanFrom: Jiri Slaby <[email protected]>
commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.
sel_lock cannot nest in the console lock. Thanks to syzkaller, the kernel states firmly:
Quoted 11 lines
WARNING: possible circular locking dependency detected
5.6.0-rc3-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.4/20336 is trying to acquire lock:ffff8880a2e952a0(&tty->termios_rwsem){++++}, at:tty_unthrottle+0x22/0x100drivers/tty/tty_ioctl.c:136but task is already holding lock:
ffffffff89462e70(sel_lock){+.+.}, at:paste_selection+0x118/0x470drivers/tty/vt/selection.c:374which lock already depends on the new lock.
Quoted 8 lines
the existing dependency chain (in reverse order) is:
-> #2 (sel_lock){+.+.}:
mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118 set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217 set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181 tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050 vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock
Quoted 6 lines
-> #1 (console_lock){+.+.}:
console_lock+0x46/0x70 kernel/printk/printk.c:2289 con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223 n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350 do_tty_write drivers/tty/tty_io.c:962 [inline] tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046
This is write().
Locks held on the path: termios_rwsem -> console_lock
Quoted 8 lines
-> #0 (&tty->termios_rwsem){++++}:
down_write+0x57/0x140 kernel/locking/rwsem.c:1534 tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136 mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902 tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465 paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389 tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055 vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem
Quoted 4 lines
other info that might help us debug this:
Chain exists of: &tty->termios_rwsem --> console_lock --> sel_lock
Clearly. From the above, we have:
console_lock -> sel_lock
sel_lock -> termios_rwsem
termios_rwsem -> console_lock
Fix this by reversing the console_lock -> sel_lock dependency in ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.
--- drivers/tty/vt/selection.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
drivers/tty/vt/selection.c +7 -9
@@ -205,7 +205,6 @@ static int __set_selection(const struct pe = tmp; } -mutex_lock (&sel_lock);if (sel_cons != vc_cons[fg_console].d) {clear_selection (); sel_cons = vc_cons[fg_console].d;
@@ -251,10 +250,9 @@ static int __set_selection(const structbreak ;case TIOCL_SELPOINTER :highlight_pointer (pe); - goto unlock; +return 0 ;default : - ret = -EINVAL ; - goto unlock; +return -EINVAL ; }/* remove the pointer */
@@ -276,7 +274,7 @@ static int __set_selection(const structelse if (new_sel_start == sel_start) {if (new_sel_end == sel_end)/* no action required */ - goto unlock; +return 0 ;else if (new_sel_end > sel_end)/* extend to right */ highlight (sel_end +2 , new_sel_end);else /* contract from right */
@@ -303,8 +301,7 @@ static int __set_selection(const structif (!bp) {printk (KERN_WARNING "selection: kmalloc() failed\n" );clear_selection (); - ret = -ENOMEM ; - goto unlock; +return -ENOMEM ; }kfree (sel_buffer); sel_buffer = bp;
@@ -329,8 +326,7 @@ static int __set_selection(const struct } } sel_buffer_lth = bp - sel_buffer; -unlock: -mutex_unlock (&sel_lock); +return ret; }
@@ -338,9 +334,11 @@ int set_selection(const struct tiocl_sel {int ret; +mutex_lock (&sel_lock);console_lock (); ret =__set_selection (v, tty);console_unlock (); +mutex_unlock (&sel_lock);return ret; }
Greg Kroah-Hartman
maintainerPATCH 60/72 dmaengine: tegra-apb: Fix use-after-free
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
commit 94788af4ed039476ff3527b0e6a12c1dc42cb022 upstream.
I was doing some experiments with I2C and noticed that Tegra APB DMA driver crashes sometime after I2C DMA transfer termination. The crash happens because tegra_dma_terminate_all() bails out immediately if pending list is empty, and thus, it doesn't release the half-completed descriptors which are getting re-used before ISR tasklet kicks-in.
tegra-i2c 7000c400.i2c: DMA transfer timeout elants_i2c 0-0010: elants_i2c_irq: failed to read data: -110
------------[ cut here ]------------ WARNING: CPU: 0 PID: 142 at lib/list_debug.c:45 __list_del_entry_valid+0x45/0xac list_del corruption, ddbaac44->next is LIST_POISON1 (00000100) Modules linked in: CPU: 0 PID: 142 Comm: kworker/0:2 Not tainted 5.5.0-rc2-next-20191220-00175-gc3605715758d-dirty #538 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events_freezable_power_ thermal_zone_device_check [<c010e5c5>] (unwind_backtrace) from [<c010a1c5>] (show_stack+0x11/0x14) [<c010a1c5>] (show_stack) from [<c0973925>] (dump_stack+0x85/0x94) [<c0973925>] (dump_stack) from [<c011f529>] (__warn+0xc1/0xc4) [<c011f529>] (__warn) from [<c011f7e9>] (warn_slowpath_fmt+0x61/0x78) [<c011f7e9>] (warn_slowpath_fmt) from [<c042497d>] (__list_del_entry_valid+0x45/0xac) [<c042497d>] (__list_del_entry_valid) from [<c047a87f>] (tegra_dma_tasklet+0x5b/0x154) [<c047a87f>] (tegra_dma_tasklet) from [<c0124799>] (tasklet_action_common.constprop.0+0x41/0x7c) [<c0124799>] (tasklet_action_common.constprop.0) from [<c01022ab>] (__do_softirq+0xd3/0x2a8) [<c01022ab>] (__do_softirq) from [<c0124683>] (irq_exit+0x7b/0x98) [<c0124683>] (irq_exit) from [<c0168c19>] (__handle_domain_irq+0x45/0x80) [<c0168c19>] (__handle_domain_irq) from [<c043e429>] (gic_handle_irq+0x45/0x7c) [<c043e429>] (gic_handle_irq) from [<c0101aa5>] (__irq_svc+0x65/0x94) Exception stack(0xde2ebb90 to 0xde2ebbd8)
--- drivers/dma/tegra20-apb-dma.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/dma/tegra20-apb-dma.c +0 -4
@@ -754,10 +754,6 @@ static int tegra_dma_terminate_all(strucbool was_busy;spin_lock_irqsave (&tdc->lock, flags); -if (list_empty (&tdc->pending_sg_req)) { -spin_unlock_irqrestore (&tdc->lock, flags); -return 0 ; - }if (!tdc->busy) goto skip_dma_stop;
Greg Kroah-Hartman
maintainerPATCH 61/72 dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list
In reply to Greg Kroah-HartmanFrom: Dmitry Osipenko <[email protected]>
commit c33ee1301c393a241d6424e36eff1071811b1064 upstream.
The interrupt handler puts a half-completed DMA descriptor on a free list and then schedules tasklet to process bottom half of the descriptor that executes client's callback, this creates possibility to pick up the busy descriptor from the free list. Thus, let's disallow descriptor's re-use until it is fully processed.
--- drivers/dma/tegra20-apb-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/tegra20-apb-dma.c +1 -1
@@ -285,7 +285,7 @@ static struct tegra_dma_desc *tegra_dma_/* Do not allocate if desc are waiting for ack */ list_for_each_entry (dma_desc, &tdc->free_dma_desc, node) { -if (async_tx_test_ack (&dma_desc->txd)) { +if (async_tx_test_ack (&dma_desc->txd) && !dma_desc->cb_count) {list_del (&dma_desc->node);spin_unlock_irqrestore (&tdc->lock, flags); dma_desc->txd.flags =0 ;
Greg Kroah-Hartman
maintainerPATCH 62/72 ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output
In reply to Greg Kroah-HartmanFrom: Takashi Iwai <[email protected]>
commit 6c89ffea60aa3b2a33ae7987de1e84bfb89e4c9e upstream.
dpcm_show_state() invokes multiple snprintf() calls to concatenate formatted strings on the fixed size buffer. The usage of snprintf() is supposed for avoiding the buffer overflow, but it doesn't work as expected because snprintf() doesn't return the actual output size but the size to be written.
Fix this bug by replacing all snprintf() calls with scnprintf() calls.
--- sound/soc/soc-pcm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
sound/soc/soc-pcm.c +8 -8
@@ -2866,16 +2866,16 @@ static ssize_t dpcm_show_state(struct snssize_t offset =0 ;/* FE state */ - offset +=snprintf (buf + offset, size - offset, + offset +=scnprintf (buf + offset, size - offset,"[%s - %s]\n" , fe->dai_link->name, stream ?"Capture" :"Playback" ); - offset +=snprintf (buf + offset, size - offset,"State: %s\n" , + offset +=scnprintf (buf + offset, size - offset,"State: %s\n" ,dpcm_state_string (fe->dpcm[stream].state));if ((fe->dpcm[stream].state >=SND_SOC_DPCM_STATE_HW_PARAMS ) && (fe->dpcm[stream].state <=SND_SOC_DPCM_STATE_STOP )) - offset += snprintf(buf + offset, size - offset, + offset += scnprintf(buf + offset, size - offset, "Hardware Params: " "Format = %s, Channels = %d, Rate = %d\n", snd_pcm_format_name(params_format(params)),
@@ -2883,10 +2883,10 @@ static ssize_t dpcm_show_state(struct sn params_rate(params));/* BEs state */ - offset +=snprintf (buf + offset, size - offset,"Backends:\n" ); + offset +=scnprintf (buf + offset, size - offset,"Backends:\n" );if (list_empty (&fe->dpcm[stream].be_clients)) { - offset +=snprintf (buf + offset, size - offset, + offset +=scnprintf (buf + offset, size - offset," No active DSP links\n" ); goto out; }
@@ -2895,16 +2895,16 @@ static ssize_t dpcm_show_state(struct snstruct snd_soc_pcm_runtime *be = dpcm->be; params = &dpcm->hw_params; - offset +=snprintf (buf + offset, size - offset, + offset +=scnprintf (buf + offset, size - offset,"- %s\n" , be->dai_link->name); - offset +=snprintf (buf + offset, size - offset, + offset +=scnprintf (buf + offset, size - offset," State: %s\n" ,dpcm_state_string (be->dpcm[stream].state));if ((be->dpcm[stream].state >=SND_SOC_DPCM_STATE_HW_PARAMS ) && (be->dpcm[stream].state <=SND_SOC_DPCM_STATE_STOP )) - offset += snprintf(buf + offset, size - offset, + offset += scnprintf(buf + offset, size - offset, " Hardware Params: " "Format = %s, Channels = %d, Rate = %d\n", snd_pcm_format_name(params_format(params)),
Greg Kroah-Hartman
maintainerPATCH 63/72 ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
In reply to Greg Kroah-HartmanFrom: Matthias Reichl <[email protected]>
commit ac0a68997935c4acb92eaae5ad8982e0bb432d56 upstream.
When we get a clock error during probe we have to call regulator_bulk_disable before bailing out, otherwise we trigger a warning in regulator_put.
Fix this by using "goto err" like in the error cases above.
--- sound/soc/codecs/pcm512x.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
sound/soc/codecs/pcm512x.c +5 -3
@@ -1439,13 +1439,15 @@ int pcm512x_probe(struct device *dev, st } pcm512x->sclk =devm_clk_get (dev,NULL ); -if (PTR_ERR (pcm512x->sclk) == -EPROBE_DEFER ) -return -EPROBE_DEFER ; +if (PTR_ERR (pcm512x->sclk) == -EPROBE_DEFER ) { + ret = -EPROBE_DEFER ; + goto err; + }if (!IS_ERR (pcm512x->sclk)) { ret =clk_prepare_enable (pcm512x->sclk);if (ret !=0 ) {dev_err (dev,"Failed to enable SCLK: %d\n" , ret); -return ret; + goto err; } }
Greg Kroah-Hartman
maintainerPATCH 64/72 ASoC: dapm: Correct DAPM handling of active widgets during shutdown
In reply to Greg Kroah-HartmanFrom: Charles Keepax <[email protected]>
commit 9b3193089e77d3b59b045146ff1c770dd899acb1 upstream.
commit c2caa4da46a4 ("ASoC: Fix widget powerdown on shutdown") added a set of the power state during snd_soc_dapm_shutdown to ensure the widgets powered off. However, when commit 39eb5fd13dff ("ASoC: dapm: Delay w->power update until the changes are written") added the new_power member of the widget structure, to differentiate between the current power state and the target power state, it did not update the shutdown to use the new_power member.
As new_power has not updated it will be left in the state set by the last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence for the shutdown proceeds it will turn the widgets on (despite them already being on) rather than turning them off.
--- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/soc-dapm.c +1 -1
@@ -4317,7 +4317,7 @@ static void soc_dapm_shutdown_dapm(struccontinue ;if (w->power) {dapm_seq_insert (w, &down_list, false); - w->power =0 ; + w->new_power =0 ; powerdown =1 ; } }
Greg Kroah-Hartman
maintainerPATCH 65/72 RDMA/iwcm: Fix iwcm work deallocation
In reply to Greg Kroah-HartmanFrom: Bernard Metzler <[email protected]>
commit 810dbc69087b08fd53e1cdd6c709f385bc2921ad upstream.
The dealloc_work_entries() function must update the work_free_list pointer while freeing its entries, since potentially called again on same list. A second iteration of the work list caused system crash. This happens, if work allocation fails during cma_iw_listen() and free_cm_id() tries to free the list again during cleanup.
--- drivers/infiniband/core/iwcm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/infiniband/core/iwcm.c +3 -1
@@ -125,8 +125,10 @@ static void dealloc_work_entries(struct {struct list_head *e, *tmp; -list_for_each_safe (e, tmp, &cm_id_priv->work_free_list) +list_for_each_safe (e, tmp, &cm_id_priv->work_free_list) { +list_del (e);kfree (list_entry(e ,struct iwcm_work ,free_list )); + } }static int alloc_work_entries (struct iwcm_id_private *cm_id_priv,int count)
Greg Kroah-Hartman
maintainerPATCH 66/72 RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
In reply to Greg Kroah-HartmanFrom: Jason Gunthorpe <[email protected]>
commit c14dfddbd869bf0c2bafb7ef260c41d9cebbcfec upstream.
The algorithm pre-allocates a cm_id since allocation cannot be done while holding the cm.lock spinlock, however it doesn't free it on one error path, leading to a memory leak.
--- drivers/infiniband/core/cm.c | 1 + 1 file changed, 1 insertion(+)
drivers/infiniband/core/cm.c +1 -0
@@ -1073,6 +1073,7 @@ struct ib_cm_id *ib_cm_insert_listen(str/* Sharing an ib_cm_id with different handlers is not * supported */ spin_unlock_irqrestore (&cm.lock, flags); +ib_destroy_cm_id (cm_id);return ERR_PTR (-EINVAL ); }atomic_inc (&cm_id_priv->refcount);
Greg Kroah-Hartman
maintainerPATCH 67/72 ARM: imx: build v7_cpu_resume() unconditionally
In reply to Greg Kroah-HartmanFrom: Ahmad Fatoum <[email protected]>
commit 512a928affd51c2dc631401e56ad5ee5d5dd68b6 upstream.
This function is not only needed by the platform suspend code, but is also reused as the CPU resume function when the ARM cores can be powered down completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L).
Providing the static inline stub whenever CONFIG_SUSPEND is disabled means that those platforms will hang on resume from cpuidle if suspend is disabled.
So there are two problems:
- The static inline stub masks the linker error
- The function is not available where needed
Fix both by just building the function unconditionally, when CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long, so it's arguably ok to just leave it in for all i.MX6 kernel configurations.
--- arch/arm/mach-imx/Makefile | 2 ++ arch/arm/mach-imx/common.h | 4 ++-- arch/arm/mach-imx/resume-imx6.S | 24 ++++++++++++++++++++++++ arch/arm/mach-imx/suspend-imx6.S | 14 -------------- 4 files changed, 28 insertions(+), 16 deletions(-)
arch/arm/mach-imx/Makefile +2 -0
@@ -91,6 +91,8 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif +AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SOC_IMX6) += resume-imx6.o obj-$(CONFIG_SOC_IMX6) += pm-imx6.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
arch/arm/mach-imx/common.h +2 -2
@@ -115,17 +115,17 @@ void imx_cpu_die(unsigned int cpu);int imx_cpu_kill (unsigned int cpu);#ifdef CONFIG_SUSPEND -void v7_cpu_resume (void );void imx53_suspend (void __iomem *ocram_vbase);extern const u32 imx53_suspend_sz;void imx6_suspend (void __iomem *ocram_vbase);#else -static inline void v7_cpu_resume (void ) {}static inline void imx53_suspend (void __iomem *ocram_vbase) {}static const u32 imx53_suspend_sz;static inline void imx6_suspend (void __iomem *ocram_vbase) {}#endif +void v7_cpu_resume (void ); +void imx6_pm_ccm_init (const char *ccm_compat);void imx6q_pm_init (void );void imx6dl_pm_init (void );
arch/arm/mach-imx/resume-imx6.S new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/asm-offsets.h> +#include <asm/hardware/cache-l2x0.h> +#include "hardware.h" + +/* + * The following code must assume it is running from physical address + * where absolute virtual addresses to the data section have to be + * turned into relative ones. + */ + +ENTRY(v7_cpu_resume) + bl v7_invalidate_l1 +#ifdef CONFIG_CACHE_L2X0 + bl l2c310_early_resume +#endif + b cpu_resume +ENDPROC(v7_cpu_resume)
arch/arm/mach-imx/suspend-imx6.S +0 -14
@@ -333,17 +333,3 @@ resume: ret lr ENDPROC(imx6_suspend) - -/* - * The following code must assume it is running from physical address - * where absolute virtual addresses to the data section have to be - * turned into relative ones. - */ - -ENTRY(v7_cpu_resume) - bl v7_invalidate_l1 -#ifdef CONFIG_CACHE_L2X0 - bl l2c310_early_resume -#endif - b cpu_resume -ENDPROC(v7_cpu_resume)
Greg Kroah-Hartman
maintainerPATCH 68/72 hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit 44f2f882909fedfc3a56e4b90026910456019743 upstream.
This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one.
--- drivers/hwmon/adt7462.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/adt7462.c +1 -1
@@ -426,7 +426,7 @@ static int ADT7462_REG_VOLT(struct adt74return 0x95 ;break ; } -return -ENODEV ; +return 0 ; }/* Provide labels for sysfs */
Greg Kroah-Hartman
maintainerPATCH 69/72 dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()
In reply to Greg Kroah-HartmanFrom: Dan Carpenter <[email protected]>
commit 36d5d22090d13fd3a7a8c9663a711cbe6970aac8 upstream.
The caller is already holding the lock so this will deadlock.
--- drivers/dma/coh901318.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/dma/coh901318.c +0 -4
@@ -1960,8 +1960,6 @@ static void dma_tc_handle(struct coh9013return ; } -spin_lock (&cohc->lock); -/* * When we reach this point, at least one queue item * should have been moved over from cohc->queue to
@@ -1982,8 +1980,6 @@ static void dma_tc_handle(struct coh9013if (coh901318_queue_start (cohc) ==NULL ) cohc->busy =0 ; -spin_unlock (&cohc->lock); -/* * This tasklet will remove items from cohc->active * and thus terminates them.
Greg Kroah-Hartman
maintainerPATCH 70/72 powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
In reply to Greg Kroah-HartmanFrom: Desnes A. Nunes do Rosario <[email protected]>
commit fc37a1632d40c80c067eb1bc235139f5867a2667 upstream.
PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch.
The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems.
--- arch/powerpc/kernel/cputable.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/powerpc/kernel/cputable.c +3 -1
@@ -2147,11 +2147,13 @@ static struct cpu_spec * __init setup_cp* oprofile_cpu_type already has a value, then we are * possibly overriding a real PVR with a logical one, * and, in that case, keep the current value for -* oprofile_cpu_type. +* oprofile_cpu_type. Futhermore, let's ensure that the +* fix for the PMAO bug is enabled on compatibility mode. */ if (old.oprofile_cpu_type !=NULL ) { t->oprofile_cpu_type = old.oprofile_cpu_type; t->oprofile_type = old.oprofile_type; + t->cpu_features |= old.cpu_features &CPU_FTR_PMAO_BUG ; } }
Greg Kroah-Hartman
maintainerPATCH 71/72 dm cache: fix a crash due to incorrect work item cancelling
In reply to Greg Kroah-HartmanFrom: Mikulas Patocka <[email protected]>
commit 7cdf6a0aae1cccf5167f3f04ecddcf648b78e289 upstream.
The crash can be reproduced by running the lvm2 testsuite test lvconvert-thin-external-cache.sh for several minutes, e.g.:
while :; do make check T=shell/lvconvert-thin-external-cache.sh; done
The crash happens in this call chain:do_waker -> policy_tick -> smq_tick -> end_hotspot_period -> clear_bitset -> memset -> __memset -- which accesses an invalid pointer in the vmalloc area.
The work entry on the workqueue is executed even after the bitmap was freed. The problem is that cancel_delayed_work doesn't wait for the running work item to finish, so the work item can continue running and re-submitting itself even after cache_postsuspend. In order to make sure that the work item won't be running, we must use cancel_delayed_work_sync.
Also, change flush_workqueue to drain_workqueue, so that if some work item submits itself or another work item, we are properly waiting for both of them.
--- drivers/md/dm-cache-target.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/md/dm-cache-target.c +2 -2
@@ -2193,8 +2193,8 @@ static void wait_for_migrations(struct cstatic void stop_worker (struct cache *cache) { -cancel_delayed_work (&cache->waker); -flush_workqueue (cache->wq); +cancel_delayed_work_sync (&cache->waker); +drain_workqueue (cache->wq); }static void requeue_deferred_cells (struct cache *cache)
Greg Kroah-Hartman
maintainerPATCH 72/72 crypto: algif_skcipher - use ZERO_OR_NULL_PTR in skcipher_recvmsg_async
In reply to Greg Kroah-HartmanFrom: yangerkun <[email protected]>
Nowdays, we trigger a oops:
...
kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP KASAN
...
Call Trace: [<ffffffff81a26fb1>] skcipher_recvmsg_async+0x3f1/0x1400 x86/../crypto/algif_skcipher.c:543 [<ffffffff81a28053>] skcipher_recvmsg+0x93/0x7f0 x86/../crypto/algif_skcipher.c:723 [<ffffffff823e43a4>] sock_recvmsg_nosec x86/../net/socket.c:702 [inline] [<ffffffff823e43a4>] sock_recvmsg x86/../net/socket.c:710 [inline] [<ffffffff823e43a4>] sock_recvmsg+0x94/0xc0 x86/../net/socket.c:705 [<ffffffff823e464b>] sock_read_iter+0x27b/0x3a0 x86/../net/socket.c:787 [<ffffffff817f479b>] aio_run_iocb+0x21b/0x7a0 x86/../fs/aio.c:1520 [<ffffffff817f57c9>] io_submit_one x86/../fs/aio.c:1630 [inline] [<ffffffff817f57c9>] do_io_submit+0x6b9/0x10b0 x86/../fs/aio.c:1688 [<ffffffff817f902d>] SYSC_io_submit x86/../fs/aio.c:1713 [inline] [<ffffffff817f902d>] SyS_io_submit+0x2d/0x40 x86/../fs/aio.c:1710 [<ffffffff828b33c3>] tracesys_phase2+0x90/0x95
In skcipher_recvmsg_async, we use '!sreq->tsg' to determine does we calloc fail. However, kcalloc may return ZERO_SIZE_PTR, and with this, the latter sg_init_table will trigger the bug. Fix it be use ZERO_OF_NULL_PTR.
This function was introduced with ' commit a596999b7ddf ("crypto:
algif - change algif_skcipher to be asynchronous")', and has been removed with 'commit e870456d8e7c ("crypto: algif_skcipher - overhaul memory management")'.
--- crypto/algif_skcipher.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
v1->v2:
update the commit message
crypto/algif_skcipher.c +1 -1
@@ -538,7 +538,7 @@ static int skcipher_recvmsg_async(structlock_sock (sk); tx_nents =skcipher_all_sg_nents (ctx); sreq->tsg =kcalloc (tx_nents,sizeof (*sg),GFP_KERNEL ); -if (unlikely (!sreq->tsg)) +if (unlikely (ZERO_OR_NULL_PTR (sreq->tsg))) goto unlock;sg_init_table (sreq->tsg, tx_nents);memcpy (iv, ctx->iv, ivsize);
Jon Hunter
maintainerQuoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.216-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.4:
6 builds: 6 pass, 0 fail
12 boots: 12 pass, 0 fail
19 tests: 19 pass, 0 failLinux version: 4.4.216-rc1-g836f82655232
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra30-cardhu-a04
Cheers
Jon
Signature · 1 line
nvpublic
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
Build results:
total: 170 pass: 170 fail: 0 Qemu test results: total: 335 pass: 335 fail: 0
Guenter
Quoted 9 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 9 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.216-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Quoted 10 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
Quoted 8 lines
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.216-rc1.gzor in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.gitlinux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.216-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 836f82655232ea02028bb5857f19bfd950b33c33
git describe: v4.4.215-73-g836f82655232
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.215-73-g836f82655232
No regressions (compared to build v4.4.215)
No fixes (compared to build v4.4.215)
Ran 21137 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* kselftest
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-cap_bounds-64k-page_size-tests
* ltp-cap_bounds-kasan-tests
* ltp-commands-64k-page_size-tests
* ltp-commands-kasan-tests
* ltp-containers-64k-page_size-tests
* ltp-containers-kasan-tests
* ltp-cpuhotplug-64k-page_size-tests
* ltp-cpuhotplug-kasan-tests
* ltp-crypto-64k-page_size-tests
* ltp-crypto-kasan-tests
* ltp-cve-64k-page_size-tests
* ltp-cve-kasan-tests
* ltp-dio-64k-page_size-tests
* ltp-dio-kasan-tests
* ltp-fcntl-locktests-64k-page_size-tests
* ltp-fcntl-locktests-kasan-tests
* ltp-filecaps-64k-page_size-tests
* ltp-filecaps-kasan-tests
* ltp-fs-64k-page_size-tests
* ltp-fs-kasan-tests
* ltp-fs_bind-64k-page_size-tests
* ltp-fs_bind-kasan-tests
* ltp-fs_perms_simple-64k-page_size-tests
* ltp-fs_perms_simple-kasan-tests
* ltp-fsx-64k-page_size-tests
* ltp-fsx-kasan-tests
* ltp-hugetlb-64k-page_size-tests
* ltp-hugetlb-kasan-tests
* ltp-io-64k-page_size-tests
* ltp-io-kasan-tests
* ltp-ipc-64k-page_size-tests
* ltp-ipc-kasan-tests
* ltp-math-64k-page_size-tests
* ltp-math-kasan-tests
* ltp-mm-64k-page_size-tests
* ltp-mm-kasan-tests
* ltp-nptl-64k-page_size-tests
* ltp-nptl-kasan-tests
* ltp-pty-64k-page_size-tests
* ltp-pty-kasan-tests
* ltp-sched-64k-page_size-tests
* ltp-sched-kasan-tests
* ltp-securebits-64k-page_size-tests
* ltp-securebits-kasan-tests
* ltp-syscalls-64k-page_size-tests
* ltp-syscalls-compat-tests
* ltp-syscalls-kasan-tests
* install-android-platform-tools-r2600
* ltp-open-posix-tests
* kselftest-vsyscall-mode-none
Summary
------------------------------------------------------------------------
kernel: 4.4.216-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.216-rc1-hikey-20200310-664
git commit: ac3d5b19a0a5c40aaa3436bb63d6b0098eb7ce7b
git describe: 4.4.216-rc1-hikey-20200310-664
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.216-rc1-hikey-20200310-664
No regressions (compared to build 4.4.216-rc1-hikey-20200309-663)
No fixes (compared to build 4.4.216-rc1-hikey-20200309-663)
Ran 1682 total tests in the following environments and test suites.
Environments
--------------
- hi6220-hikey - arm64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
Signature · 2 lines
Linaro LKFT https://lkft.linaro.org
Hello Greg,
Quoted 8 lines
From: [email protected] <[email protected]> On Behalf Of Greg Kroah-Hartman
Sent: 10 March 2020 12:38This is the start of the stable review cycle for the 4.4.216 release. There are 72 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
No build issues seen for CIP configs for Linux 4.4.216-rc1 (836f82655232).
Build logs: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/124878979
Pipeline: https://gitlab.com/cip-project/cip-testing/linux-cip-pipelines/-/blob/master/trees/linux-4.4.y.yml
Kind regards, Chris
Quoted 326 lines
Responses should be made by Thu, 12 Mar 2020 12:34:10 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-
4.4.216-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-4.4.y
and the diffstat can be found below.thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:Greg Kroah-Hartman <[email protected]>
Linux 4.4.216-rc1yangerkun <[email protected]>
crypto:algif_skcipher- useZERO_OR_NULL_PTRinskcipher_recvmsg_asyncMikulas Patocka <[email protected]>
dm cache: fix a crash due to incorrect work item cancellingDesnes A. Nunes do Rosario <[email protected]>
powerpc: fix hardware PMU exception bug on PowerVM compatibility mode
systemsDan Carpenter <[email protected]>
dmaengine: coh901318: Fix a double lock bug indma_tc_handle()Dan Carpenter <[email protected]>
hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()Ahmad Fatoum <[email protected]>
ARM: imx: buildv7_cpu_resume()unconditionallyJason Gunthorpe <[email protected]>
RMDA/cm: Fix missingib_cm_destroy_id()inib_cm_insert_listen()Bernard Metzler <[email protected]>
RDMA/iwcm: Fix iwcm work deallocationCharles Keepax <[email protected]>
ASoC: dapm: Correct DAPM handling of active widgets during shutdownMatthias Reichl <[email protected]>
ASoC: pcm512x: Fix unbalanced regulator enable call in probe error pathTakashi Iwai <[email protected]>
ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs outputDmitry Osipenko <[email protected]>
dmaengine: tegra-apb: Prevent race conditions of tasklet vs free listDmitry Osipenko <[email protected]>
dmaengine: tegra-apb: Fix use-after-freeJiri Slaby <[email protected]>
vt: selection, pushsel_lockupJiri Slaby <[email protected]>
vt: selection, push console lock downJiri Slaby <[email protected]>
vt: selection, closesel_bufferraceOGAWA Hirofumi <[email protected]>
fat: fix uninit-memory access for partial initialized inodeZhang Xiaoxu <[email protected]>
vgacon: Fix a UAF invgacon_invert_regionEugeniu Rosca <[email protected]>
usb: core: port: do error out ifusb_autopm_get_interface()failsEugeniu Rosca <[email protected]>
usb: core: hub: do error out ifusb_autopm_get_interface()failsDan Lazewatsky <[email protected]>
usb: quirks: addNO_LPMquirk for Logitech Screen ShareJim Lin <[email protected]>
usb: storage: Add quirk for Samsung Fit flashRonnie Sahlberg <[email protected]>
cifs: don't leak-EAGAINforstat()during reconnectVasily Averin <[email protected]>
s390/cio:cio_ignore_proc_seq_nextshould increase position indexMarco Felsch <[email protected]>
watchdog: da9062: do not ping the hw duringstop()Marek Vasut <[email protected]>
net: ks8851-ml: Fix 16-bit IO operationMarek Vasut <[email protected]>
net: ks8851-ml: Fix 16-bit data accessMarek Vasut <[email protected]>
net: ks8851-ml: Remove 8-bit bus accessorsHarigovindan P <[email protected]>
drm/msm/dsi: save pll state before dsi host is powered offJohn Stultz <[email protected]>
drm: msm: Fix return type ofdsi_mgr_connector_mode_validfor kCFISergey Organov <[email protected]>
usb: gadget: serial: fix Tx stall after buffer overflowLars-Peter Clausen <[email protected]>
usb: gadget: ffs:ffs_aio_cancel(): Save/restore IRQ flagsDaniel Golle <[email protected]>
serial:ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDEPaul Moore <[email protected]>
audit: always check the netlink payload length inaudit_receive_msg()Matthew Wilcox <[email protected]>
fs: prevent page refcount overflow inpipe_buf_getMiklos Szeredi <[email protected]>
pipe: addpipe_buf_get()helperLinus Torvalds <[email protected]>
mm: preventget_user_pages()from overflowing page refcountPunit Agrawal <[email protected]>
mm, gup: ensure real head page is ref-counted when using hugepagesWill Deacon <[email protected]>
mm, gup: remove brokenVM_BUG_ON_PAGEcompound check for
hugepagesLinus Torvalds <[email protected]>
mm: add 'try_get_page()' helper functionLinus Torvalds <[email protected]>
mm: make page ref count overflow check tighter and more explicityangerkun <[email protected]>
slip: stop double free sl->dev in slip_openSean Christopherson <[email protected]>
KVM: Check for a bad hva before dropping into the ghc slow pathAleksa Sarai <[email protected]>
namei: only return-ECHILDfromfollow_dotdot_rcu()Nikolay Aleksandrov <[email protected]>
net: netlink: cap max groups which will be considered innetlink_bind()Chris Wilson <[email protected]>
include/linux/bitops.h: introduceBITS_PER_TYPENathan Chancellor <[email protected]>
ecryptfs: Fix up bad backport offe2e082f5da5b4a0a92ae32978f81507ef37ec66Wolfram Sang <[email protected]>
i2c: jz4780: silence log flood on txabrtChristophe JAILLET <[email protected]>
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'[email protected] <[email protected]>
HID: hiddev: Fix race in inhiddev_disconnect()Johan Korsnes <[email protected]>
HID: core: increase HID report buffer size to 8KiBJohan Korsnes <[email protected]>
HID: core: fix off-by-one memset inhid_report_raw_event()Paul Moore <[email protected]>
audit: fix error handling inaudit_data_to_entry()Dan Carpenter <[email protected]>
ext4: potential crash on allocation error inext4_alloc_flex_bg_array()Jason Baron <[email protected]>
net: sched: correct flower port blockingDmitry Osipenko <[email protected]>
nfc: pn544: Fix occasional HW initialization failureXin Long <[email protected]>
sctp: move the format error check out of__sctp_sf_do_9_1_abortBenjamin Poirier <[email protected]>
ipv6: Fix route replacement with dev-only routeBenjamin Poirier <[email protected]>
ipv6: Fixnlmsg_flagswhen splitting a multipath routeArun Parameswaran <[email protected]>
net: phy: restore mdio regs in the iproc mdio driverJethro Beekman <[email protected]>
net:fib_rules: Correctly set table field when table number exceeds 8 bitsPetr Mladek <[email protected]>
sysrq: Remove duplicated sysrq messagePetr Mladek <[email protected]>
sysrq: Restore originalconsole_loglevelwhen sysrq disabledSergey Matyukevich <[email protected]>
cfg80211: add missing policy forNL80211_ATTR_STATUS_CODEFrank Sorenson <[email protected]>
cifs: Fix mode output in debugging statementsSergey Matyukevich <[email protected]>
cfg80211: check wiphy driver existence for drvinfo reportJohannes Berg <[email protected]>
mac80211: consider more elements in parsing CRCCorey Minyard <[email protected]>
ipmi:ssif: Handle a possible NULL pointer referenceSuraj Jitindar Singh <[email protected]>
ext4: fix potential race betweens_group_infoonline resizing and accessSuraj Jitindar Singh <[email protected]>
ext4: fix potential race betweens_flex_groupsonline resizing and accessTheodore Ts'o <[email protected]>
ext4: fix potential race between online resizing and write operationsJohannes Berg <[email protected]>
iwlwifi: pcie: fixrb_allocatorworkqueue allocation-------------
Diffstat:
Makefile | 4 +- arch/arm/mach-imx/Makefile | 2 + arch/arm/mach-imx/common.h | 4 +- arch/arm/mach-imx/resume-imx6.S | 24 +++++++ arch/arm/mach-imx/suspend-imx6.S | 14 ----- arch/mips/kernel/vpe.c | 2 +- arch/powerpc/kernel/cputable.c | 4 +- arch/s390/mm/gup.c | 6 +- arch/x86/mm/gup.c | 9 ++- crypto/algif_skcipher.c | 2 +- drivers/char/ipmi/ipmi_ssif.c | 10 ++- drivers/dma/coh901318.c | 4 -- drivers/dma/tegra20-apb-dma.c | 6 +- drivers/gpu/drm/msm/dsi/dsi_manager.c | 7 ++- drivers/hid/hid-core.c | 4 +- drivers/hid/usbhid/hiddev.c | 2 +- drivers/hwmon/adt7462.c | 2 +- drivers/i2c/busses/i2c-jz4780.c | 36 +---------- drivers/infiniband/core/cm.c | 1 + drivers/infiniband/core/iwcm.c | 4 +- drivers/md/dm-cache-target.c | 4 +- drivers/net/ethernet/micrel/ks8851_mll.c | 53 +++------------- drivers/net/phy/mdio-bcm-iproc.c | 20 ++++++ drivers/net/slip/slip.c | 1 - drivers/net/wireless/iwlwifi/pcie/rx.c | 6 +- drivers/nfc/pn544/i2c.c | 1 + drivers/s390/cio/blacklist.c | 5 +- drivers/tty/serial/ar933x_uart.c | 8 +++ drivers/tty/sysrq.c | 8 +-- drivers/tty/vt/selection.c | 24 ++++++- drivers/tty/vt/vt.c | 2 - drivers/usb/core/hub.c | 6 +- drivers/usb/core/port.c | 10 ++- drivers/usb/core/quirks.c | 3 + drivers/usb/gadget/function/f_fs.c | 5 +- drivers/usb/gadget/function/u_serial.c | 4 +- drivers/usb/storage/unusual_devs.h | 6 ++ drivers/video/console/vgacon.c | 3 + drivers/watchdog/da9062_wdt.c | 7 --- fs/cifs/cifsacl.c | 4 +- fs/cifs/connect.c | 2 +- fs/cifs/inode.c | 8 ++- fs/ecryptfs/keystore.c | 4 +- fs/ext4/balloc.c | 14 ++++- fs/ext4/ext4.h | 30 +++++++-- fs/ext4/ialloc.c | 23 ++++--- fs/ext4/mballoc.c | 61 ++++++++++++------ fs/ext4/resize.c | 62 +++++++++++++++---- fs/ext4/super.c | 103 +++++++++++++++++++++---------- fs/fat/inode.c | 19 +++--- fs/fuse/dev.c | 12 ++-- fs/namei.c | 2 +- fs/pipe.c | 4 +- fs/splice.c | 12 +++- include/linux/bitops.h | 3 +- include/linux/hid.h | 2 +- include/linux/mm.h | 23 ++++++- include/linux/pipe_fs_i.h | 17 ++++- include/net/flow_dissector.h | 9 +++ kernel/audit.c | 40 ++++++------ kernel/auditfilter.c | 71 +++++++++++---------- kernel/trace/trace.c | 6 +- mm/gup.c | 51 ++++++++++----- mm/hugetlb.c | 16 ++++- mm/internal.h | 28 ++++++++- net/core/fib_rules.c | 2 +- net/ipv6/ip6_fib.c | 7 ++- net/ipv6/route.c | 1 + net/mac80211/util.c | 18 ++++-- net/netlink/af_netlink.c | 5 +- net/sched/cls_flower.c | 1 + net/sctp/sm_statefuns.c | 27 +++++--- net/wireless/ethtool.c | 8 ++- net/wireless/nl80211.c | 1 + sound/soc/codecs/pcm512x.c | 8 ++- sound/soc/soc-dapm.c | 2 +- sound/soc/soc-pcm.c | 16 ++--- virt/kvm/kvm_main.c | 12 ++-- 78 files changed, 684 insertions(+), 373 deletions(-)