s390/zcrypt: Use scnprintf() for avoiding potential buffer overflow
Subsystems (2)
PATCH 1/1 s390/zcrypt: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf().
--- drivers/s390/crypto/zcrypt_cex4.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/s390/crypto/zcrypt_cex4.c +13 -13
@@ -128,16 +128,16 @@ static ssize_t cca_mkvps_show(struct device *dev, n =snprintf (buf,PAGE_SIZE ,"AES NEW: - -\n" );if (ci.cur_mk_state >='1' && ci.cur_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , cao_state[ci.cur_mk_state -'1' ], ci.cur_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" );if (ci.old_mk_state >='1' && ci.old_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , cao_state[ci.old_mk_state -'1' ], ci.old_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" );return n; }
@@ -251,11 +251,11 @@ static ssize_t ep11_card_op_modes_show(struct device *dev,if (ci.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ; - n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }
@@ -305,21 +305,21 @@ static ssize_t ep11_mkvps_show(struct device *dev, cwk_state[di.cur_wk_state - '0']);bin2hex (buf + n, di.cur_wkvp,sizeof (di.cur_wkvp)); n +=2 *sizeof (di.cur_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else n =snprintf (buf,PAGE_SIZE ,"WK CUR: - -\n" );if (di.new_wk_state =='0' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , nwk_state[di.new_wk_state -'0' ]); }else if (di.new_wk_state >='1' && di.new_wk_state <='2' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , nwk_state[di.new_wk_state -'0' ]);bin2hex (buf + n, di.new_wkvp,sizeof (di.new_wkvp)); n +=2 *sizeof (di.new_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" );return n; }
@@ -346,11 +346,11 @@ static ssize_t ep11_queue_op_modes_show(struct device *dev,if (di.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ; - n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }
Signature · 1 line
2.16.4
Harald Freudenberger
maintainerQuoted 79 lines · Takashi Iwai
Since
snprintf()returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing withscnprintf().Signed-off-by Takashi Iwai <[email protected]>--- drivers/s390/crypto/zcrypt_cex4.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)drivers/s390/crypto/zcrypt_cex4.c +11
-11@@ -128,16 +128,16 @@ static ssize_t cca_mkvps_show(struct device *dev, n =snprintf (buf,PAGE_SIZE ,"AES NEW: - -\n" );if (ci.cur_mk_state >='1' && ci.cur_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , cao_state[ci.cur_mk_state -'1' ], ci.cur_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" );if (ci.old_mk_state >='1' && ci.old_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , cao_state[ci.old_mk_state -'1' ], ci.old_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" );return n; }@@ -251,11 +251,11 @@ static ssize_t ep11_card_op_modes_show(struct device *dev,if (ci.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ; - n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }@@ -305,21 +305,21 @@ static ssize_t ep11_mkvps_show(struct device *dev, cwk_state[di.cur_wk_state - '0']);bin2hex (buf + n, di.cur_wkvp,sizeof (di.cur_wkvp)); n +=2 *sizeof (di.cur_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else n =snprintf (buf,PAGE_SIZE ,"WK CUR: - -\n" );if (di.new_wk_state =='0' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , nwk_state[di.new_wk_state -'0' ]); }else if (di.new_wk_state >='1' && di.new_wk_state <='2' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , nwk_state[di.new_wk_state -'0' ]);bin2hex (buf + n, di.new_wkvp,sizeof (di.new_wkvp)); n +=2 *sizeof (di.new_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" );return n; }@@ -346,11 +346,11 @@ static ssize_t ep11_queue_op_modes_show(struct device *dev,if (di.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ;
drivers/s390/crypto/zcrypt_cex4.c static ssize_t ep11_queue_op_modes_show(struct device *dev, · line 356
Quoted 10 lines
drivers/s390/crypto/zcrypt_cex4.c +2
-2- n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }
Thanks for this patch.
I will use this as a trigger point to rework all the snprintfs within the ap bus and zcrypt code and replace them with scnprintf wherever the return code is used. Did not know that there are issues with snprintf ... This article gives some background: https://lwn.net/Articles/69419/
The updates will go into the s390 subsystem and will be forwarded to the upstream kernel with the next kernel merge window.
Harald Freudenberger
Quoted 94 lines · Harald Freudenberger
Quoted 79 lines · Takashi Iwai
Since
snprintf()returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing withscnprintf().Signed-off-by Takashi Iwai <[email protected]>--- drivers/s390/crypto/zcrypt_cex4.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)drivers/s390/crypto/zcrypt_cex4.c +11
-11@@ -128,16 +128,16 @@ static ssize_t cca_mkvps_show(struct device *dev, n =snprintf (buf,PAGE_SIZE ,"AES NEW: - -\n" );if (ci.cur_mk_state >='1' && ci.cur_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: %s 0x%016llx\n" , cao_state[ci.cur_mk_state -'1' ], ci.cur_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES CUR: - -\n" );if (ci.old_mk_state >='1' && ci.old_mk_state <='2' ) - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: %s 0x%016llx\n" , cao_state[ci.old_mk_state -'1' ], ci.old_mkvp);else - n +=snprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"AES OLD: - -\n" );return n; }@@ -251,11 +251,11 @@ static ssize_t ep11_card_op_modes_show(struct device *dev,if (ci.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ; - n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }@@ -305,21 +305,21 @@ static ssize_t ep11_mkvps_show(struct device *dev, cwk_state[di.cur_wk_state - '0']);bin2hex (buf + n, di.cur_wkvp,sizeof (di.cur_wkvp)); n +=2 *sizeof (di.cur_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else n =snprintf (buf,PAGE_SIZE ,"WK CUR: - -\n" );if (di.new_wk_state =='0' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s -\n" , nwk_state[di.new_wk_state -'0' ]); }else if (di.new_wk_state >='1' && di.new_wk_state <='2' ) { - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: %s 0x" , nwk_state[di.new_wk_state -'0' ]);bin2hex (buf + n, di.new_wkvp,sizeof (di.new_wkvp)); n +=2 *sizeof (di.new_wkvp); - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" ); }else - n +=snprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"WK NEW: - -\n" );return n; }@@ -346,11 +346,11 @@ static ssize_t ep11_queue_op_modes_show(struct device *dev,if (di.op_mode & (1 << ep11_op_modes[i].mode_bit)) {if (n >0 ) buf[n++] =' ' ;drivers/s390/crypto/zcrypt_cex4.c static ssize_t ep11_queue_op_modes_show(struct device *dev, · line 356
Quoted 10 lines
drivers/s390/crypto/zcrypt_cex4.c +2
-2- n +=snprintf (buf + n,PAGE_SIZE - n, + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s" , ep11_op_modes[i].mode_txt); } } - n +=snprintf (buf + n,PAGE_SIZE - n,"\n" ); + n +=scnprintf (buf + n,PAGE_SIZE - n,"\n" );return n; }Thanks for this patch.
Quoted 6 lines
I will use this as a trigger point to rework all the snprintfs within the ap bus and zcrypt code and replace them with scnprintf wherever the return code is used. Did not know that there are issues with snprintf ... This article gives some background: https://lwn.net/Articles/69419/
The updates will go into the s390 subsystem and will be forwarded to the upstream kernel with the next kernel merge window.
Covering the whole snprintf() usage would be nicer, yes.
Thanks!
Takashi