Skip to contentSkip to conversation

modpost: move the namespace field in Module.symvers last

PATCH In review Jessica Yu 4 participants 10 messages Mar 11, 2020 – Apr 1, 2020

Subsystems (3)
lore
Share & tools
lore

Jessica Yu

author
#0 lore raw

PATCH v2 1/1 modpost: move the namespace field in Module.symvers last

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +2 -2
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 
 	The syntax of the Module.symvers file is::
 
-	<CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+	<CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-	0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+	0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
 	The fields are separated by tabs and values may be empty (e.g.
 	if no namespace is defined for an exported symbol).
scripts/export_report.pl +1 -1
index 548330e8c4e7..feb3d5542a62 100755
@@ -94,7 +94,7 @@ if (defined $opt{'o'}) {
 #
 while ( <$module_symvers> ) {
 	chomp;
-	my (undef, $symbol, $namespace, $module, $gpl) = split('\t');
+	my (undef, $symbol, $module, $gpl, $namespace) = split('\t');
 	$SYMBOL { $symbol } =  [ $module , "0" , $symbol, $gpl];
 }
 close($module_symvers);
scripts/mod/modpost.c +12 -12
index a3d8370f9544..e1963ef8c07c 100644
@@ -2421,7 +2421,7 @@ static void write_if_changed(struct buffer *b, const char *fname)
 }
 
 /* parse Module.symvers file. line format:
- * 0x12345678<tab>symbol<tab>module[[<tab>export]<tab>something]
+ * 0x12345678<tab>symbol<tab>module<tab>export<tab>namespace
  **/
 static void read_dump(const char *fname, unsigned int kernel)
 {
@@ -2434,7 +2434,7 @@ static void read_dump(const char *fname, unsigned int kernel)
 		return;
 
 	while ((line = get_next_line(&pos, file, size))) {
-		char *symname, *namespace, *modname, *d, *export, *end;
+		char *symname, *namespace, *modname, *d, *export;
 		unsigned int crc;
 		struct module *mod;
 		struct symbol *s;
@@ -2442,16 +2442,16 @@ static void read_dump(const char *fname, unsigned int kernel)
 		if (!(symname = strchr(line, '\t')))
 			goto fail;
 		*symname++ = '\0';
-		if (!(namespace = strchr(symname, '\t')))
-			goto fail;
-		*namespace++ = '\0';
-		if (!(modname = strchr(namespace, '\t')))
+		if (!(modname = strchr(symname, '\t')))
 			goto fail;
 		*modname++ = '\0';
-		if ((export = strchr(modname, '\t')) != NULL)
-			*export++ = '\0';
-		if (export && ((end = strchr(export, '\t')) != NULL))
-			*end = '\0';
+		if (!(export = strchr(modname, '\t')))
+			goto fail;
+		*export++ = '\0';
+		if (!(namespace = strchr(export, '\t')))
+			goto fail;
+		*namespace++ = '\0';
+
 		crc = strtoul(line, &d, 16);
 		if (*symname == '\0' || *modname == '\0' || *d != '\0')
 			goto fail;
@@ -2502,9 +2502,9 @@ static void write_dump(const char *fname)
 				namespace = symbol->namespace;
 				buf_printf(&buf, "0x%08x\t%s\t%s\t%s\t%s\n",
 					   symbol->crc, symbol->name,
-					   namespace ? namespace : "",
 					   symbol->module->name,
-					   export_str(symbol->export));
+					   export_str(symbol->export),
+					   namespace ? namespace : "");
 			}
 			symbol = symbol->next;
 		}
Signature · 1 line
2.16.4
#1 lore raw
Quoted 27 lines · Jessica Yu

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")
Quoted 5 lines

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

Great, thanks for fixing this.

Lucas De Marchi

Quoted 97 lines
 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +2 -2
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 
        The syntax of the Module.symvers file is::
 
-       <CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+       <CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-       0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+       0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
        The fields are separated by tabs and values may be empty (e.g.
        if no namespace is defined for an exported symbol).
scripts/export_report.pl +1 -1
index 548330e8c4e7..feb3d5542a62 100755
@@ -94,7 +94,7 @@ if (defined $opt{'o'}) {
 #
 while ( <$module_symvers> ) {
        chomp;
-       my (undef, $symbol, $namespace, $module, $gpl) = split('\t');
+       my (undef, $symbol, $module, $gpl, $namespace) = split('\t');
        $SYMBOL { $symbol } =  [ $module , "0" , $symbol, $gpl];
 }
 close($module_symvers);
scripts/mod/modpost.c +12 -13
index a3d8370f9544..e1963ef8c07c 100644
@@ -2421,7 +2421,7 @@ static void write_if_changed(struct buffer *b, const char *fname)
 }
 
 /* parse Module.symvers file. line format:
- * 0x12345678<tab>symbol<tab>module[[<tab>export]<tab>something]
+ * 0x12345678<tab>symbol<tab>module<tab>export<tab>namespace
  **/
 static void read_dump(const char *fname, unsigned int kernel)
 {
@@ -2434,7 +2434,7 @@ static void read_dump(const char *fname, unsigned int kernel)
                return;
 
        while ((line = get_next_line(&pos, file, size))) {
-               char *symname, *namespace, *modname, *d, *export, *end;
+               char *symname, *namespace, *modname, *d, *export;
                unsigned int crc;
                struct module *mod;
                struct symbol *s;
@@ -2442,16 +2442,16 @@ static void read_dump(const char *fname, unsigned int kernel)
                if (!(symname = strchr(line, '\t')))
                        goto fail;
                *symname++ = '\0';
-               if (!(namespace = strchr(symname, '\t')))
-                       goto fail;
-               *namespace++ = '\0';
-               if (!(modname = strchr(namespace, '\t')))
+               if (!(modname = strchr(symname, '\t')))
                        goto fail;
                *modname++ = '\0';
-               if ((export = strchr(modname, '\t')) != NULL)
-                       *export++ = '\0';
-               if (export && ((end = strchr(export, '\t')) != NULL))
-                       *end = '\0';
+               if (!(export = strchr(modname, '\t')))
+                       goto fail;
+               *export++ = '\0';
+               if (!(namespace = strchr(export, '\t')))
+                       goto fail;
+               *namespace++ = '\0';
+
                crc = strtoul(line, &d, 16);
                if (*symname == '\0' || *modname == '\0' || *d != '\0')
                        goto fail;
@@ -2502,9 +2502,9 @@ static void write_dump(const char *fname)
                                namespace = symbol->namespace;
                                buf_printf(&buf, "0x%08x\t%s\t%s\t%s\t%s\n",
                                           symbol->crc, symbol->name,
-                                          namespace ? namespace : "",
                                           symbol->module->name,
-                                          export_str(symbol->export));
+                                          export_str(symbol->export),
+                                          namespace ? namespace : "");
                        }
                        symbol = symbol->next;
                }
--

2.16.4

Signature · 1 line
Lucas De Marchi
#2 lore raw
In reply to Jessica Yu
Quoted 21 lines · Jessica Yu

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Quoted 6 lines
Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

While I am not opposed to this fix,
I did not even notice Module.symvers was official interface.

Kbuild invokes scripts/depmod.sh to finalize the 'make modules_install', but I do not see the -E option being used there.

I do not see Module.symvers installed in /lib/modules/$(uname -r)/.

Quoted 102 lines

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +2 -2
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 
        The syntax of the Module.symvers file is::
 
-       <CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+       <CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-       0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+       0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
        The fields are separated by tabs and values may be empty (e.g.
        if no namespace is defined for an exported symbol).
scripts/export_report.pl +1 -1
index 548330e8c4e7..feb3d5542a62 100755
@@ -94,7 +94,7 @@ if (defined $opt{'o'}) {
 #
 while ( <$module_symvers> ) {
        chomp;
-       my (undef, $symbol, $namespace, $module, $gpl) = split('\t');
+       my (undef, $symbol, $module, $gpl, $namespace) = split('\t');
        $SYMBOL { $symbol } =  [ $module , "0" , $symbol, $gpl];
 }
 close($module_symvers);
scripts/mod/modpost.c +12 -13
index a3d8370f9544..e1963ef8c07c 100644
@@ -2421,7 +2421,7 @@ static void write_if_changed(struct buffer *b, const char *fname)
 }
 
 /* parse Module.symvers file. line format:
- * 0x12345678<tab>symbol<tab>module[[<tab>export]<tab>something]
+ * 0x12345678<tab>symbol<tab>module<tab>export<tab>namespace
  **/
 static void read_dump(const char *fname, unsigned int kernel)
 {
@@ -2434,7 +2434,7 @@ static void read_dump(const char *fname, unsigned int kernel)
                return;
 
        while ((line = get_next_line(&pos, file, size))) {
-               char *symname, *namespace, *modname, *d, *export, *end;
+               char *symname, *namespace, *modname, *d, *export;
                unsigned int crc;
                struct module *mod;
                struct symbol *s;
@@ -2442,16 +2442,16 @@ static void read_dump(const char *fname, unsigned int kernel)
                if (!(symname = strchr(line, '\t')))
                        goto fail;
                *symname++ = '\0';
-               if (!(namespace = strchr(symname, '\t')))
-                       goto fail;
-               *namespace++ = '\0';
-               if (!(modname = strchr(namespace, '\t')))
+               if (!(modname = strchr(symname, '\t')))
                        goto fail;
                *modname++ = '\0';
-               if ((export = strchr(modname, '\t')) != NULL)
-                       *export++ = '\0';
-               if (export && ((end = strchr(export, '\t')) != NULL))
-                       *end = '\0';
+               if (!(export = strchr(modname, '\t')))
+                       goto fail;
+               *export++ = '\0';
+               if (!(namespace = strchr(export, '\t')))
+                       goto fail;
+               *namespace++ = '\0';
+
                crc = strtoul(line, &d, 16);
                if (*symname == '\0' || *modname == '\0' || *d != '\0')
                        goto fail;
@@ -2502,9 +2502,9 @@ static void write_dump(const char *fname)
                                namespace = symbol->namespace;
                                buf_printf(&buf, "0x%08x\t%s\t%s\t%s\t%s\n",
                                           symbol->crc, symbol->name,
-                                          namespace ? namespace : "",
                                           symbol->module->name,
-                                          export_str(symbol->export));
+                                          export_str(symbol->export),
+                                          namespace ? namespace : "");
                        }
                        symbol = symbol->next;
                }
--

2.16.4

Signature · 2 lines
Best Regards
Masahiro Yamada
#3 lore raw
Quoted 34 lines · Masahiro Yamada
Quoted 21 lines · Jessica Yu

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Quoted 6 lines
Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

While I am not opposed to this fix,
I did not even notice Module.symvers was official interface.

Quoted 9 lines

Kbuild invokes scripts/depmod.sh to finalize the 'make modules_install', but I do not see the -E option being used there.

I do not see Module.symvers installed in /lib/modules/$(uname -r)/.

Applied to linux-kbuild/fixes.

Signature · 2 lines
Best Regards
Masahiro Yamada
author
#4 lore raw
In reply to Masahiro Yamada

+++ Masahiro Yamada [14/03/20 11:11 +0900]:

Quoted 33 lines · Jessica Yu
Quoted 21 lines

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Quoted 6 lines
Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

While I am not opposed to this fix,
I did not even notice Module.symvers was official interface.

Quoted 6 lines

Kbuild invokes scripts/depmod.sh to finalize the 'make modules_install', but I do not see the -E option being used there.

I do not see Module.symvers installed in /lib/modules/$(uname -r)/.

While that's true, distros typically package Module.symvers in their linux-headers/kernel-devel (or equivalent) packages to support external module builds. The -E option is usually used to do symbol versioning/kabi checks with the Module.symvers file. Considering the options, I think it will cause the least headaches down the line to make this fix upstream and maintain backwards compatibility with kmod rather than to patch kmod and remind distros to repackage because old depmod versions don't work with the new Module.symvers anymore..

Thank you!

Jessica

#5 lore raw
In reply to Jessica Yu
Quoted 44 lines · Jessica Yu

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +0 -0
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 

Documentation/kbuild/modules.rst build. · line 478

Quoted 10 lines
Documentation/kbuild/modules.rst +2 -2
        The syntax of the Module.symvers file is::
 
-       <CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+       <CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-       0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+       0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
        The fields are separated by tabs and values may be empty (e.g.
        if no namespace is defined for an exported symbol).

Despite the documentation here claiming the namespace field can be empty, I'm seeing some trouble with this patch when building external modules:
FATAL: parse error in symbol dump file

I've confirmed reverting it make things work again, but its not clear to me quite yet why.

The only difference I can find is that the Module.symvers in the external module project doesn't seem to have a tab at the end of each line (where as Module.symvers for the kernel - which doesn't seem to have any namespace names - does).

Is there something I need to tweak on the external Kbuild to get Module.symvers to be generated properly (with the empty tab at the end) for this new change?
Or does the parser need to be a bit more flexible?

thanks
-john

#6 lore raw
Quoted 69 lines · John Stultz
Quoted 44 lines · Jessica Yu

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +0 -0
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 

Documentation/kbuild/modules.rst build. · line 478

Quoted 10 lines
Documentation/kbuild/modules.rst +2 -2
        The syntax of the Module.symvers file is::
 
-       <CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+       <CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-       0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+       0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
        The fields are separated by tabs and values may be empty (e.g.
        if no namespace is defined for an exported symbol).

Despite the documentation here claiming the namespace field can be empty, I'm seeing some trouble with this patch when building external modules:
FATAL: parse error in symbol dump file

I've confirmed reverting it make things work again, but its not clear to me quite yet why.

The only difference I can find is that the Module.symvers in the external module project doesn't seem to have a tab at the end of each line (where as Module.symvers for the kernel - which doesn't seem to have any namespace names - does).

Quoted 5 lines

Is there something I need to tweak on the external Kbuild to get Module.symvers to be generated properly (with the empty tab at the end) for this new change?
Or does the parser need to be a bit more flexible?

One extra clue on this: I noticed the external module Makefile had KBUILD_EXTRA_SYMBOLS="$(EXTRA_SYMBOLS)" in the $(MAKE) string, where EXTRA_SYMBOLS pointed to some files that no longer exist. I removed the KBUILD_EXTRA_SYMBOLS= argument, and magically, the generated Module.symvers now had tabs at the end of each line.

I wonder if there some path in the KBUILD_EXTRA_SYMBOLS= handling that isn't generating the output in the same way?

thanks
-john

author
#7 lore raw

+++ John Stultz [30/03/20 23:25 -0700]:

Quoted 76 lines · John Stultz
Quoted 69 lines · Jessica Yu
Quoted 44 lines

In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module).

In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now.

Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow.

Fixes cb9b55d21fe0 ("modpost: add support for symbol namespaces")

---
v2:

- Explain the changes to read_dump() and the comment (and provide historical context) in the commit message. (Lucas De Marchi)

 Documentation/kbuild/modules.rst |  4 ++--
 scripts/export_report.pl         |  2 +-
 scripts/mod/modpost.c            | 24 ++++++++++++------------
 3 files changed, 15 insertions(+), 15 deletions(-)
Documentation/kbuild/modules.rst +0 -0
index 69fa48ee93d6..e0b45a257f21 100644
@@ -470,9 +470,9 @@ build.
 

Documentation/kbuild/modules.rst build. · line 478

Quoted 10 lines
Documentation/kbuild/modules.rst +2 -2
        The syntax of the Module.symvers file is::
 
-       <CRC>       <Symbol>          <Namespace>  <Module>                         <Export Type>
+       <CRC>       <Symbol>         <Module>                         <Export Type>     <Namespace>
 
-       0xe1cc2a05  usb_stor_suspend  USB_STORAGE  drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL
+       0xe1cc2a05  usb_stor_suspend drivers/usb/storage/usb-storage  EXPORT_SYMBOL_GPL USB_STORAGE
 
        The fields are separated by tabs and values may be empty (e.g.
        if no namespace is defined for an exported symbol).

Despite the documentation here claiming the namespace field can be empty, I'm seeing some trouble with this patch when building external modules:
FATAL: parse error in symbol dump file

I've confirmed reverting it make things work again, but its not clear to me quite yet why.

The only difference I can find is that the Module.symvers in the external module project doesn't seem to have a tab at the end of each line (where as Module.symvers for the kernel - which doesn't seem to have any namespace names - does).

Quoted 5 lines

Is there something I need to tweak on the external Kbuild to get Module.symvers to be generated properly (with the empty tab at the end) for this new change?
Or does the parser need to be a bit more flexible?

Quoted 8 lines

One extra clue on this: I noticed the external module Makefile had KBUILD_EXTRA_SYMBOLS="$(EXTRA_SYMBOLS)" in the $(MAKE) string, where EXTRA_SYMBOLS pointed to some files that no longer exist. I removed the KBUILD_EXTRA_SYMBOLS= argument, and magically, the generated Module.symvers now had tabs at the end of each line.

I wonder if there some path in the KBUILD_EXTRA_SYMBOLS= handling that isn't generating the output in the same way?

I'm afraid we're going to need some specifics on reproducing this issue. Could you provide a reproducer or steps on how to reproduce? I have not been able to trigger this problem even with KBUILD_EXTRA_SYMBOLS pointing to an invalid path (I also tested with valid paths).

I tested with a skeleton external module that exports two functions, one with a namespace and one without. I built this module against the latest v5.6 kernel. The generated Module.symvers was correct - the namespaced function had the namespace at the end and the other function without a namespace had a tab at the end.

I also tested with two external modules, one with a symbol dependency on the other, so KBUILD_EXTRA_SYMBOLS usage is required here. The generated Module.symvers was also correct here.

The only advice I can offer at this time is that all external modules must be built against the new kernel to generate a correctly formated Module.symvers file. If you have any KBUILD_EXTRA_SYMBOLS pointing to an outdated Module.symvers file for example, you will see the "FATAL:
parse error in symbol dump file" error.

Hope this helps,

Jessica

#8 lore raw
Quoted 38 lines · Jessica Yu

+++ John Stultz [30/03/20 23:25 -0700]:

Quoted 12 lines · John Stultz
Quoted 10 lines

The only difference I can find is that the Module.symvers in the external module project doesn't seem to have a tab at the end of each line (where as Module.symvers for the kernel - which doesn't seem to have any namespace names - does).

Is there something I need to tweak on the external Kbuild to get Module.symvers to be generated properly (with the empty tab at the end) for this new change?
Or does the parser need to be a bit more flexible?

Quoted 8 lines

One extra clue on this: I noticed the external module Makefile had KBUILD_EXTRA_SYMBOLS="$(EXTRA_SYMBOLS)" in the $(MAKE) string, where EXTRA_SYMBOLS pointed to some files that no longer exist. I removed the KBUILD_EXTRA_SYMBOLS= argument, and magically, the generated Module.symvers now had tabs at the end of each line.

I wonder if there some path in the KBUILD_EXTRA_SYMBOLS= handling that isn't generating the output in the same way?

I'm afraid we're going to need some specifics on reproducing this issue. Could you provide a reproducer or steps on how to reproduce? I have not been able to trigger this problem even with KBUILD_EXTRA_SYMBOLS pointing to an invalid path (I also tested with valid paths).

I tested with a skeleton external module that exports two functions, one with a namespace and one without. I built this module against the latest v5.6 kernel. The generated Module.symvers was correct - the namespaced function had the namespace at the end and the other function without a namespace had a tab at the end.

I also tested with two external modules, one with a symbol dependency on the other, so KBUILD_EXTRA_SYMBOLS usage is required here. The generated Module.symvers was also correct here.

Quoted 5 lines

The only advice I can offer at this time is that all external modules must be built against the new kernel to generate a correctly formated Module.symvers file. If you have any KBUILD_EXTRA_SYMBOLS pointing to an outdated Module.symvers file for example, you will see the "FATAL:
parse error in symbol dump file" error.

Well, my apologies. :( In the light of day, this isn't reproducing anymore. I'm a bit at a loss as to why I was tripping over it so regularly before, but I suspect something in the build is leaving a stale Modules.symvers around from before this patch landed.

Terribly sorry for the noise.

thanks
-john

author
#9 lore raw

+++ John Stultz [31/03/20 15:09 -0700]:

Quoted 45 lines · Jessica Yu
Quoted 38 lines

+++ John Stultz [30/03/20 23:25 -0700]:

Quoted 12 lines · John Stultz
Quoted 10 lines

The only difference I can find is that the Module.symvers in the external module project doesn't seem to have a tab at the end of each line (where as Module.symvers for the kernel - which doesn't seem to have any namespace names - does).

Is there something I need to tweak on the external Kbuild to get Module.symvers to be generated properly (with the empty tab at the end) for this new change?
Or does the parser need to be a bit more flexible?

Quoted 8 lines

One extra clue on this: I noticed the external module Makefile had KBUILD_EXTRA_SYMBOLS="$(EXTRA_SYMBOLS)" in the $(MAKE) string, where EXTRA_SYMBOLS pointed to some files that no longer exist. I removed the KBUILD_EXTRA_SYMBOLS= argument, and magically, the generated Module.symvers now had tabs at the end of each line.

I wonder if there some path in the KBUILD_EXTRA_SYMBOLS= handling that isn't generating the output in the same way?

I'm afraid we're going to need some specifics on reproducing this issue. Could you provide a reproducer or steps on how to reproduce? I have not been able to trigger this problem even with KBUILD_EXTRA_SYMBOLS pointing to an invalid path (I also tested with valid paths).

I tested with a skeleton external module that exports two functions, one with a namespace and one without. I built this module against the latest v5.6 kernel. The generated Module.symvers was correct - the namespaced function had the namespace at the end and the other function without a namespace had a tab at the end.

I also tested with two external modules, one with a symbol dependency on the other, so KBUILD_EXTRA_SYMBOLS usage is required here. The generated Module.symvers was also correct here.

Quoted 5 lines

The only advice I can offer at this time is that all external modules must be built against the new kernel to generate a correctly formated Module.symvers file. If you have any KBUILD_EXTRA_SYMBOLS pointing to an outdated Module.symvers file for example, you will see the "FATAL:
parse error in symbol dump file" error.

Quoted 6 lines

Well, my apologies. :( In the light of day, this isn't reproducing anymore. I'm a bit at a loss as to why I was tripping over it so regularly before, but I suspect something in the build is leaving a stale Modules.symvers around from before this patch landed.

Terribly sorry for the noise.

No problem, thank for reporting back!

Jessica