dt-bindings: display: Fix dtc unit-address warnings in examples

Extra dtc warnings (roughly what W=1 enables) are now enabled by default when building the binding examples. These were fixed treewide in 5.6-rc5, but some new display bindings have been added with new warnings:

Documentation/devicetree/bindings/display/panel/raydium,rm68200.example.dts:17.7-27.11: Warning (unit_address_vs_reg): /example-0/dsi@0: node has a unit name, but no reg property Documentation/devicetree/bindings/display/panel/panel-simple-dsi.example.dts:17.19-31.11: Warning (unit_address_vs_reg): /example-0/mdss_dsi@fd922800: node has a unit name, but no reg property Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.example.dts:17.7-26.11: Warning (unit_address_vs_reg): /example-0/dsi@0: node has a unit name, but no reg property Documentation/devicetree/bindings/display/ti/ti,am65x-dss.example.dts:21.27-49.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,j721e-dss.example.dts:21.27-72.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dts:20.27-42.11: Warning (unit_address_format): /example-0/dss@02540000: unit name should not have leading 0s

Cc Thierry Reding <[email protected]>

Cc Sam Ravnborg <[email protected]>

Cc Jyri Sarha <[email protected]>

Cc Tomi Valkeinen <[email protected]>

Signed-off-by Rob Herring <[email protected]>

---
 .../devicetree/bindings/display/panel/orisetech,otm8009a.yaml  | 3 +--
 .../devicetree/bindings/display/panel/panel-simple-dsi.yaml    | 2 +-
 .../devicetree/bindings/display/panel/raydium,rm68200.yaml     | 2 +-
 Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml | 2 +-
 Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml | 2 +-
 Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml   | 2 +-
 6 files changed, 6 insertions(+), 7 deletions(-)

Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml +1 -2

index 6e6ac995c27b..2e7c65b093d7 100644
@@ -39,7 +39,7 @@ required:
 
 examples:
   - |
-    dsi@0 {
+    dsi {
       #address-cells = <1>;
       #size-cells = <0>;
       panel@0 {

@@ -50,4 +50,3 @@ examples:
       };
     };
...
-

Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +1 -1

index 8b60368a2425..b2e8742fd6af 100644
@@ -50,7 +50,7 @@ required:
 
 examples:
   - |
-    mdss_dsi@fd922800 {
+    dsi {
       #address-cells = <1>;
       #size-cells = <0>;
       panel@0 {

Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml +1 -1

index 09149f140d5f..a35ba16fc000 100644
@@ -42,7 +42,7 @@ required:
 
 examples:
   - |
-    dsi@0 {
+    dsi {
       #address-cells = <1>;
       #size-cells = <0>;
       panel@0 {

Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +1 -1

index cac61a998203..aa5543a64526 100644
@@ -121,7 +121,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,am65x-dss";
             reg =   <0x0 0x04a00000 0x0 0x1000>, /* common */
                     <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */

Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +1 -1

index ade9b2f513f5..6d47cd7206c2 100644
@@ -154,7 +154,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
-    dss: dss@04a00000 {
+    dss: dss@4a00000 {
             compatible = "ti,j721e-dss";
             reg =   <0x00 0x04a00000 0x00 0x10000>, /* common_m */
                     <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/

Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml +1 -1

index 385bd060ccf9..7cb37053e95b 100644
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    dss: dss@02540000 {
+    dss: dss@2540000 {
             compatible = "ti,k2g-dss";
             reg =   <0x02540000 0x400>,
                     <0x02550000 0x1000>,

Signature · 1 line

2.20.1

Quoted 12 lines · Rob Herring

Extra dtc warnings (roughly what W=1 enables) are now enabled by default when building the binding examples. These were fixed treewide in 5.6-rc5, but some new display bindings have been added with new warnings:

Documentation/devicetree/bindings/display/panel/raydium,rm68200.example.dts:17.7-27.11: Warning (unit_address_vs_reg): /example-0/dsi@0: node has a unit name, but no reg property Documentation/devicetree/bindings/display/panel/panel-simple-dsi.example.dts:17.19-31.11: Warning (unit_address_vs_reg): /example-0/mdss_dsi@fd922800: node has a unit name, but no reg property Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.example.dts:17.7-26.11: Warning (unit_address_vs_reg): /example-0/dsi@0: node has a unit name, but no reg property Documentation/devicetree/bindings/display/ti/ti,am65x-dss.example.dts:21.27-49.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,j721e-dss.example.dts:21.27-72.11: Warning (unit_address_format): /example-0/dss@04a00000: unit name should not have leading 0s Documentation/devicetree/bindings/display/ti/ti,k2g-dss.example.dts:20.27-42.11: Warning (unit_address_format): /example-0/dss@02540000: unit name should not have leading 0s

Quoted 5 lines

Cc Thierry Reding <[email protected]>

Cc Sam Ravnborg <[email protected]>

Cc Jyri Sarha <[email protected]>

Cc Tomi Valkeinen <[email protected]>

Signed-off-by Rob Herring <[email protected]>

Reviewed-by Sam Ravnborg <[email protected]>

And I can drop my patch that only fixed the panel/ parts - good.