Skip to contentSkip to conversation

net: mii clause 37 helpers

PATCH In review Russell King - ARM Linux admin 4 participants 6 messages Mar 15, 2020 – Mar 16, 2020

Subsystems (3)
Networking Network drivers Ethernet PHY
lore
Share & tools
lore
#3 lore raw

PATCH 2/2 net: mii: add linkmode_adv_to_mii_adv_x()

In reply to Russell King - ARM Linux admin

Add a helper to convert a linkmode advertisement to a clause 37 advertisement value for 1000base-x and 2500base-x.

Signed-off-by Russell King <[email protected]>
---
 include/linux/mii.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
include/linux/mii.h +20 -0
index 309de4a3e6e7..219b93cad1dd 100644
@@ -536,6 +536,26 @@ static inline void mii_lpa_mod_linkmode_x(unsigned long *linkmodes, u16 lpa,
 			 lpa & LPA_1000XFULL);
 }
 
+/**
+ * linkmode_adv_to_mii_adv_x - encode a linkmode to config_reg
+ * @linkmodes: linkmodes
+ * @fd_bit: full duplex bit
+ */
+static inline u16 linkmode_adv_to_mii_adv_x(const unsigned long *linkmodes,
+					    int fd_bit)
+{
+	u16 adv = 0;
+
+	if (linkmode_test_bit(fd_bit, linkmodes))
+		adv |= ADVERTISE_1000XFULL;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes))
+		adv |= ADVERTISE_1000XPAUSE;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes))
+		adv |= ADVERTISE_1000XPSE_ASYM;
+
+	return adv;
+}
+
 /**
  * mii_advertise_flowctrl - get flow control advertisement flags
  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/2 net: mii: convert mii_lpa_to_ethtool_lpa_x() to linkmode variant

In reply to Russell King - ARM Linux admin

Add a LPA to linkmode decoder for 1000BASE-X protocols; this decoder only provides the modify semantics similar to other such decoders. This replaces the unused mii_lpa_to_ethtool_lpa_x() helper.

Signed-off-by Russell King <[email protected]>
---
 include/linux/mii.h | 37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)
include/linux/mii.h +19 -18
index 18c6208f56fc..309de4a3e6e7 100644
@@ -354,24 +354,6 @@ static inline u32 mii_adv_to_ethtool_adv_x(u32 adv)
 	return result;
 }
 
-/**
- * mii_lpa_to_ethtool_lpa_x
- * @adv: value of the MII_LPA register
- *
- * A small helper function that translates MII_LPA
- * bits, when in 1000Base-X mode, to ethtool
- * LP advertisement settings.
- */
-static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
-{
-	u32 result = 0;
-
-	if (lpa & LPA_LPACK)
-		result |= ADVERTISED_Autoneg;
-
-	return result | mii_adv_to_ethtool_adv_x(lpa);
-}
-
 /**
  * mii_lpa_mod_linkmode_adv_sgmii
  * @lp_advertising: pointer to destination link mode.

@@ -535,6 +517,25 @@ static inline u32 linkmode_adv_to_lcl_adv_t(unsigned long *advertising)
 	return lcl_adv;
 }
 
+/**
+ * mii_lpa_mod_linkmode_x - decode the link partner's config_reg to linkmodes
+ * @linkmodes: link modes array
+ * @lpa: config_reg word from link partner
+ * @fd_bit: link mode for 1000XFULL bit
+ */
+static inline void mii_lpa_mod_linkmode_x(unsigned long *linkmodes, u16 lpa,
+					 int fd_bit)
+{
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, linkmodes,
+			 lpa & LPA_LPACK);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes,
+			 lpa & LPA_1000XPAUSE);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes,
+			 lpa & LPA_1000XPAUSE_ASYM);
+	linkmode_mod_bit(fd_bit, linkmodes,
+			 lpa & LPA_1000XFULL);
+}
+
 /**
  * mii_advertise_flowctrl - get flow control advertisement flags
  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
Signature · 1 line
2.20.1

Russell King - ARM Linux admin

author reviewer
#0 lore raw

cover net: mii clause 37 helpers

This is a re-post of two patches that are common to two series that I've sent in recent weeks; I'm re-posting them separately in the hope that they can be merged. No changes from either of the previous postings.

These patches:

1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant.

2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so.

 include/linux/mii.h | 57 ++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 39 insertions(+), 18 deletions(-)
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
maintainer Reviewed-by on v1 1/2
#2 lore raw

Re: [PATCH net-next 1/2] net: mii: convert mii_lpa_to_ethtool_lpa_x() to linkmode variant

In reply to Russell King
Quoted 5 lines · Russell King

Add a LPA to linkmode decoder for 1000BASE-X protocols; this decoder only provides the modify semantics similar to other such decoders. This replaces the unused mii_lpa_to_ethtool_lpa_x() helper.

Signed-off-by Russell King <[email protected]>
Reviewed-by Andrew Lunn <[email protected]>

Andrew

maintainer
#5 lore raw
In reply to Russell King - ARM Linux admin

From: Russell King - ARM Linux admin <[email protected]>
Date: Sat, 14 Mar 2020 10:09:16 +0000

Quoted 7 lines

This is a re-post of two patches that are common to two series that I've sent in recent weeks; I'm re-posting them separately in the hope that they can be merged. No changes from either of the previous postings.

These patches:

Quoted 7 lines

1. convert the existing (unused) mii_lpa_to_ethtool_lpa_x() function to a linkmode variant.

2. add a helper for clause 37 advertisements, supporting both the 1000baseX and defacto 2500baseX variants. Note that ethtool does not support half duplex for either of these, and we make no effort to do so.

Series applied.