configs: ls2080aqds: support distro boot
PATCH 1/1 configs: ls2080aqds: support distro boot
Add support of distro boot for ls2080aqds
Signed-off-by Biwen Li <[email protected]>
--- include/configs/ls2080aqds.h | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-)
include/configs/ls2080aqds.h +32 -2
@@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void);"kernelheader_size=0x40000\0" \"BOARD=ls2088aqds\0" \"mcmemsize=0x70000000 \0" \ +"scriptaddr=0x80000000\0" \ +"scripthdraddr=0x80080000\0" \IFC_MC_INIT_CMD \ +BOOTENV \ +"boot_scripts=ls2088aqds_boot.scr\0" \ +"boot_script_hdr=hdr_ls2088aqds_bs.out\0" \ +"scan_dev_for_boot_part=" \ +"part list ${devtype} ${devnum} devplist; " \ +"env exists devplist || setenv devplist 1; " \ +"for distro_bootpart in ${devplist}; do " \ +"if fstype ${devtype} " \ +"${devnum}:${distro_bootpart} " \ +"bootfstype; then " \ +"run scan_dev_for_boot; " \ +"fi; " \ +"done\0" \ +"boot_a_script=" \ +"load ${devtype} ${devnum}:${distro_bootpart} " \ +"${scriptaddr} ${prefix}${script}; " \ +"env exists secureboot && load ${devtype} " \ +"${devnum}:${distro_bootpart} " \ +"${scripthdraddr} ${prefix}${boot_script_hdr} " \ +"&& esbc_validate ${scripthdraddr};" \ +"source ${scriptaddr}\0" \"nor_bootcmd=echo Trying load from nor..;" \"cp.b $kernel_addr $load_addr " \"$kernel_size ; env exists secureboot && " \
@@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void);#endif /* CONFIG_NXP_ESBC */ #ifdef CONFIG_TFABOOT +#define BOOT_TARGET_DEVICES (func) \ + func(USB, usb, 0) \ + func(MMC, mmc, 0) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#define SD_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void);"env exists mcinitcmd && run mcinitcmd " \"&& mmc read 0x80d00000 0x6800 0x800 " \"&& fsl_mc lazyapply dpl 0x80d00000; " \ -"run sd_bootcmd; " \ +"run distro_bootcmd;run sd_bootcmd; " \ "env exists secureboot && esbc_halt;"#define IFC_NOR_BOOTCOMMAND \ "env exists mcinitcmd && env exists secureboot "\ "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\ "&& fsl_mc lazyapply dpl 0x580d00000;" \ - "run nor_bootcmd; " \ + "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;"#endif
Signature · 1 line
2.17.1
PATCH 1/1 configs: ls2080aqds: support distro boot
Quoted 10 lines
-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Biwen Li
Sent: Thursday, March 19, 2020 5:31 PM
To: Jagdish Gediya <[email protected]>; Priyanka Jain <[email protected]>; Pramod Kumar <[email protected]>; Shengzhou Liu <[email protected]>
Cc: Alison Wang <[email protected]>; u-boot at lists.denx.de; Jiafei Pan <[email protected]>; Biwen Li <[email protected]>
Subject: [PATCH] configs: ls2080aqds: support distro boot
Quoted 4 lines
Add support of distro boot for ls2080aqds
Signed-off-by Biwen Li <[email protected]>---
Applied to u-boot-fsl-qoriq. Waiting upstream
Thanks
Priyanka