cmd: add driver, fs and part type listing commands
v2 cover cmd: add driver, fs and part type listing commands
This series adds commands for listing the supported partition tables, listing supported filesystems and expands Driver Model listing commands.
The existing "dm drivers" command, which lists the DM drivers and their compatibility strings, segmentation faulted on drivers for which of_match was unpopulated (which appears to not be uncommon). This was fixed, and the command was renamed "dm compat", and a new more extensive "dm drivers" command was added, which list all DM drivers and for each, their uclass id, uclass driver and the device names for active driver instances. The purpose is show available drivers, but also to highlight unused drivers or drivers with uclass ids without uclass drivers, etc.
The following commands were added:
-"part types", lists partition tables supported
-"fstypes", lists filesystem types supported
-"dm compat", lists drivers and their compatibility strings (equivalent
to existing "dm drivers" command)
-"dm drivers", lists all DM drivers, and for each their uclass id,
uclass driver and the device names for active driver instances.
-"dm static", lists all DM drivers which use static platform data
(instead of the device tree).
These patches were tested in the Sandbox and on the Wandboard i.MX6Quad Board rev B1.
Changes in v2:
- Rebased on https://patchwork.ozlabs.org/patch/1234460/
- Added Python tests
- Fixed minor typographical errors
Niel Fourie (3):
cmd: part: Add subcommand to list supported partition tables
cmd: fs: Add command to list supported fs types
cmd: dm: Fixed/Added DM driver listing subcommands
cmd/dm.c | 22 ++++++++++- cmd/fs.c | 11 ++++++ cmd/part.c | 27 +++++++++++++- drivers/core/dump.c | 55 +++++++++++++++++++++++++++- fs/fs.c | 20 ++++++++++ include/dm/util.h | 6 +++ include/fs.h | 5 +++ test/py/tests/test_dm.py | 22 ++++++++++- test/py/tests/test_fs/test_fs_cmd.py | 12 ++++++ test/py/tests/test_part.py | 14 +++++++ 10 files changed, 188 insertions(+), 6 deletions(-) create mode 100644 test/py/tests/test_fs/test_fs_cmd.py create mode 100644 test/py/tests/test_part.py
Signature · 1 line
2.25.1
PATCH v2 1/3 cmd: part: Add subcommand to list supported partition tables
Add a subcommand "types" to the part command, which lists the supported partition table types.
---
Changes in v2:
- Add Python test
cmd/part.c | 27 +++++++++++++++++++++++++-- test/py/tests/test_part.py | 14 ++++++++++++++ 2 files changed, 39 insertions(+), 2 deletions(-) create mode 100644 test/py/tests/test_part.py
cmd/part.c +25 -2
@@ -182,6 +182,26 @@ static int do_part_number(int argc, char * const argv[])return do_part_info (argc, argv,CMD_PART_INFO_NUMBER ); } +static int do_part_types (int argc,char *const argv[]) +{ + struct part_driver *drv = ll_entry_start(struct part_driver, + part_driver); + const int n_ents = ll_entry_count(struct part_driver, part_driver); +struct part_driver *entry; +int i =0 ; + +puts ("Supported partition tables" ); + +for (entry = drv; entry != drv + n_ents; entry++) { +printf ("%c %s" , i ?',' :':' , entry->name); + i++; + } +if (!i) +puts (": <none>" ); +puts ("\n" ); +return CMD_RET_SUCCESS ; +} +static int do_part (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) {if (argc <2 )
@@ -197,7 +217,8 @@ static int do_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])return do_part_size (argc -2 , argv +2 ); else if (!strcmp(argv[1], "number")) return do_part_number(argc - 2, argv + 2); - + else if (!strcmp(argv[1], "types")) + return do_part_types(argc - 2, argv + 2);return CMD_RET_USAGE ; }
@@ -221,5 +242,7 @@ U_BOOT_CMD(" part can be either partition number or partition name\n" "part number <interface> <dev> <part> <varname>\n" " - set environment variable to the partition number using the partition name\n" -" part must be specified as partition name" +" part must be specified as partition name\n" +"part types\n" +" - list supported partition table types" );
test/py/tests/test_part.py new file +14 -0
@@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 +# Niel Fourie, DENX Software Engineering, lusus at denx.de + +import pytest + + at pytest.mark.buildconfigspec('cmd_part') + at pytest.mark.buildconfigspec('partitions') + at pytest.mark.buildconfigspec('efi_partition') +def test_dm_compat(u_boot_console): + """Test that `part types` prints a result which includes `EFI`.""" + output = u_boot_console.run_command('part types') + assert "Supported partition tables:" in output + assert "EFI" in output
Signature · 1 line
2.25.1
PATCH v2 1/3 cmd: part: Add subcommand to list supported partition tables
Quoted 6 lines · Niel Fourie
Add a subcommand "types" to the part command, which lists the supported partition table types.
Signed-off-by Niel Fourie <[email protected]>CC Simon Glass <[email protected]>
Quoted 8 lines
---
Changes in v2:
- Add Python testcmd/part.c | 27 +++++++++++++++++++++++++-- test/py/tests/test_part.py | 14 ++++++++++++++ 2 files changed, 39 insertions(+), 2 deletions(-) create mode 100644 test/py/tests/test_part.py
PATCH v2 2/3 cmd: fs: Add command to list supported fs types
In reply to Niel FourieAdded command "fstypes" to list supported/included filesystems.
---
Changes in v2:
- Add Python test
cmd/fs.c | 11 +++++++++++ fs/fs.c | 20 ++++++++++++++++++++ include/fs.h | 5 +++++ test/py/tests/test_fs/test_fs_cmd.py | 12 ++++++++++++ 4 files changed, 48 insertions(+) create mode 100644 test/py/tests/test_fs/test_fs_cmd.py
cmd/fs.c +11 -0
@@ -99,3 +99,14 @@ U_BOOT_CMD("fstype <interface> <dev>:<part> <varname>\n" "- set environment variable to filesystem type\n" ); + +static int do_fstypes_wrapper (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return do_fs_types (cmdtp, flag, argc, argv); +} + +U_BOOT_CMD ( + fstypes,1 ,1 , do_fstypes_wrapper, +"List supported filesystem types" ,"" +);
fs/fs.c +20 -0
@@ -900,3 +900,23 @@ int do_ln(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],return 0 ; } + +int do_fs_types (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +{ +struct fstype_info *drv = fstypes; +const int n_ents =ARRAY_SIZE (fstypes); +struct fstype_info *entry; +int i =0 ; + +puts ("Supported filesystems" ); +for (entry = drv; entry != drv + n_ents; entry++) { +if (entry->fstype !=FS_TYPE_ANY ) { +printf ("%c %s" , i ?',' :':' , entry->name); + i++; + } + } +if (!i) +puts (": <none>" ); +puts ("\n" ); +return CMD_RET_SUCCESS ; +}
include/fs.h +5 -0
@@ -254,4 +254,9 @@ int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],*/ int do_fs_type (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]); +/* +* List supported filesystems. +*/ +int do_fs_types (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]); +#endif /* _FS_H */
test/py/tests/test_fs/test_fs_cmd.py new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 +# Niel Fourie, DENX Software Engineering, lusus at denx.de + +import pytest + + at pytest.mark.buildconfigspec('cmd_fs_generic') +def test_dm_compat(u_boot_console): + """Test that `fstypes` prints a result which includes `sandbox`.""" + output = u_boot_console.run_command('fstypes') + assert "Supported filesystems:" in output + assert "sandbox" in output
Signature · 1 line
2.25.1
PATCH v2 2/3 cmd: fs: Add command to list supported fs types
Hi Neil,
Quoted 9 lines · Niel Fourie
Added command "fstypes" to list supported/included filesystems.
Signed-off-by Niel Fourie <[email protected]>CC Simon Glass <[email protected]>---
Changes in v2:
- Add Python test
Quoted 6 lines
cmd/fs.c | 11 +++++++++++ fs/fs.c | 20 ++++++++++++++++++++ include/fs.h | 5 +++++ test/py/tests/test_fs/test_fs_cmd.py | 12 ++++++++++++ 4 files changed, 48 insertions(+) create mode 100644 test/py/tests/test_fs/test_fs_cmd.py
But please see below
Quoted 53 lines
cmd/fs.c +11
-0@@ -99,3 +99,14 @@ U_BOOT_CMD("fstype <interface> <dev>:<part> <varname>\n" "- set environment variable to filesystem type\n" ); + +static int do_fstypes_wrapper (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +return do_fs_types (cmdtp, flag, argc, argv); +} + +U_BOOT_CMD ( + fstypes,1 ,1 , do_fstypes_wrapper, +"List supported filesystem types" ,"" +);fs/fs.c +20
-0@@ -900,3 +900,23 @@ int do_ln(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],return 0 ; } + +int do_fs_types (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) +{ +struct fstype_info *drv = fstypes; +const int n_ents =ARRAY_SIZE (fstypes); +struct fstype_info *entry; +int i =0 ; + +puts ("Supported filesystems" ); +for (entry = drv; entry != drv + n_ents; entry++) { +if (entry->fstype !=FS_TYPE_ANY ) { +printf ("%c %s" , i ?',' :':' , entry->name); + i++; + } + } +if (!i) +puts (": <none>" ); +puts ("\n" ); +return CMD_RET_SUCCESS ; +}include/fs.h +0
-0
include/fs.h int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], · line 260
Quoted 7 lines
include/fs.h +4
-0@@ -254,4 +254,9 @@ int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],*/ int do_fs_type (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]); +/* +* List supported filesystems. +*/ +int do_fs_types (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]);
Please add a full function comment - see do_ext2load()
Regards,
Simon
PATCH v2 3/3 cmd: dm: Fixed/Added DM driver listing subcommands
In reply to Niel FourieRenamed dm "drivers" subcommand to "compat" (as it listed compatibility strings) and prevent it from segfaulting when drivers have no of_match populated.
Added a new "drivers" subcommand to dump a list of all known DM drivers and for each, their uclass id, uclass driver and names of attached devices.
Added a new "static" subcommand to dump a list of DM drivers with statically defined platform data.
---
Depends on: https://patchwork.ozlabs.org/patch/1234460/
Changes in v2:
- Add/extend Python tests
- Fixed minor formatting/typographical errors
cmd/dm.c | 22 +++++++++++++++- drivers/core/dump.c | 55 +++++++++++++++++++++++++++++++++++++++- include/dm/util.h | 6 +++++ test/py/tests/test_dm.py | 22 ++++++++++++++-- 4 files changed, 101 insertions(+), 4 deletions(-)
cmd/dm.c +21 -1
@@ -48,11 +48,29 @@ static int do_dm_dump_drivers(cmd_tbl_t *cmdtp, int flag, int argc,return 0 ; } +static int do_dm_dump_driver_compat (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +dm_dump_driver_compat (); + +return 0 ; +} + +static int do_dm_dump_static_driver_info (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +dm_dump_static_driver_info (); + +return 0 ; +} +static cmd_tbl_t test_commands[] = {U_BOOT_CMD_MKENT (tree,0 ,1 , do_dm_dump_all,"" ,"" ),U_BOOT_CMD_MKENT (uclass,1 ,1 , do_dm_dump_uclass,"" ,"" ),U_BOOT_CMD_MKENT (devres,1 ,1 , do_dm_dump_devres,"" ,"" ),U_BOOT_CMD_MKENT (drivers,1 ,1 , do_dm_dump_drivers,"" ,"" ), +U_BOOT_CMD_MKENT (compat,1 ,1 , do_dm_dump_driver_compat,"" ,"" ), +U_BOOT_CMD_MKENT (static,1 ,1 , do_dm_dump_static_driver_info,"" ,"" ), };static __maybe_unused void dm_reloc (void )
@@ -94,5 +112,7 @@ U_BOOT_CMD("tree Dump driver model tree ('*' = activated)\n" "dm uclass Dump list of instances for each uclass\n" "dm devres Dump list of device resources for each device\n" -"dm drivers Dump list of drivers and their compatible strings" +"dm drivers Dump list of drivers with uclass and instances\n" +"dm compat Dump list of drivers with compatibility strings\n" +"dm static Dump list of drivers with static platform data" );
drivers/core/dump.c +54 -1
64 lines not on this page · raw message
include/dm/util.h +6 -0
@@ -42,6 +42,12 @@ static inline void dm_dump_devres(void)/* Dump out a list of drivers */ void dm_dump_drivers (void ); +/* Dump out a list with each driver's compatibility strings */ +void dm_dump_driver_compat (void ); + +/* Dump out a list of drivers with static platform data */ +void dm_dump_static_driver_info (void ); +/** * Check if an of node should be or was bound before relocation. *
test/py/tests/test_dm.py +20 -2
@@ -4,14 +4,32 @@ import pytest @pytest.mark.buildconfigspec('cmd_dm') -def test_dm_drivers(u_boot_console): - """Test that each driver in `dm tree` is also listed in `dm drivers`.""" +def test_dm_compat(u_boot_console): + """Test that each driver in `dm tree` is also listed in `dm compat`.""" response = u_boot_console.run_command('dm tree') driver_index = response.find('Driver') assert driver_index != -1 drivers = (line[driver_index:].split()[0] for line in response[:-1].split('\n')[2:]) + response = u_boot_console.run_command('dm compat') + for driver in drivers: + assert driver in response + + at pytest.mark.buildconfigspec('cmd_dm') +def test_dm_drivers(u_boot_console): + """Test that each driver in `dm compat` is also listed in `dm drivers`.""" + response = u_boot_console.run_command('dm compat') + drivers = (line[:20].rstrip() for line in response[:-1].split('\n')[2:]) + response = u_boot_console.run_command('dm drivers') + for driver in drivers: + assert driver in response + + at pytest.mark.buildconfigspec('cmd_dm') +def test_dm_static(u_boot_console): + """Test that each driver in `dm static` is also listed in `dm drivers`.""" + response = u_boot_console.run_command('dm static') + drivers = (line[:25].rstrip() for line in response[:-1].split('\n')[2:]) response = u_boot_console.run_command('dm drivers') for driver in drivers: assert driver in response
Signature · 1 line
2.25.1
PATCH v2 3/3 cmd: dm: Fixed/Added DM driver listing subcommands
Quoted 169 lines · Niel Fourie
Renamed dm "drivers" subcommand to "compat" (as it listed compatibility strings) and prevent it from segfaulting when drivers have no
of_matchpopulated.Added a new "drivers" subcommand to dump a list of all known DM drivers and for each, their uclass id, uclass driver and names of attached devices.
Added a new "static" subcommand to dump a list of DM drivers with statically defined platform data.
Signed-off-by Niel Fourie <[email protected]>CC Simon Glass <[email protected]>CC Sean Anderson <[email protected]>---
Depends on: https://patchwork.ozlabs.org/patch/1234460/Changes in v2:
- Add/extend Python tests
- Fixed minor formatting/typographical errorscmd/dm.c | 22 +++++++++++++++- drivers/core/dump.c | 55 +++++++++++++++++++++++++++++++++++++++- include/dm/util.h | 6 +++++ test/py/tests/test_dm.py | 22 ++++++++++++++-- 4 files changed, 101 insertions(+), 4 deletions(-)cmd/dm.c +21
-1@@ -48,11 +48,29 @@ static int do_dm_dump_drivers(cmd_tbl_t *cmdtp, int flag, int argc,return 0 ; } +static int do_dm_dump_driver_compat (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +dm_dump_driver_compat (); + +return 0 ; +} + +static int do_dm_dump_static_driver_info (cmd_tbl_t *cmdtp,int flag,int argc, +char *const argv[]) +{ +dm_dump_static_driver_info (); + +return 0 ; +} +static cmd_tbl_t test_commands[] = {U_BOOT_CMD_MKENT (tree,0 ,1 , do_dm_dump_all,"" ,"" ),U_BOOT_CMD_MKENT (uclass,1 ,1 , do_dm_dump_uclass,"" ,"" ),U_BOOT_CMD_MKENT (devres,1 ,1 , do_dm_dump_devres,"" ,"" ),U_BOOT_CMD_MKENT (drivers,1 ,1 , do_dm_dump_drivers,"" ,"" ), +U_BOOT_CMD_MKENT (compat,1 ,1 , do_dm_dump_driver_compat,"" ,"" ), +U_BOOT_CMD_MKENT (static,1 ,1 , do_dm_dump_static_driver_info,"" ,"" ), };static __maybe_unused void dm_reloc (void )@@ -94,5 +112,7 @@ U_BOOT_CMD("tree Dump driver model tree ('*' = activated)\n" "dm uclass Dump list of instances for each uclass\n" "dm devres Dump list of device resources for each device\n" -"dm drivers Dump list of drivers and their compatible strings" +"dm drivers Dump list of drivers with uclass and instances\n" +"dm compat Dump list of drivers with compatibility strings\n" +"dm static Dump list of drivers with static platform data" );drivers/core/dump.c +54
-1@@ -97,7 +97,7 @@ void dm_dump_uclass(void) } } -void dm_dump_drivers (void ) +void dm_dump_driver_compat (void ) { struct driver *d = ll_entry_start(struct driver, driver); const int n_ents = ll_entry_count(struct driver, driver);@@ -116,3 +116,56 @@ void dm_dump_drivers(void)printf ("%-20.20s\n" , entry->name); } } + +void dm_dump_drivers (void ) +{ + struct driver *d = ll_entry_start(struct driver, driver); + const int n_ents = ll_entry_count(struct driver, driver); +struct driver *entry; +struct udevice *udev; +struct uclass *uc; +int i; + +puts ("Driver uid uclass Devices\n" ); +puts ("----------------------------------------------------------\n" ); + +for (entry = d; entry < d + n_ents; entry++) { +uclass_get (entry->id, &uc); + +printf ("%-25.25s %-3.3d %-20.20s " , entry->name, entry->id, + uc ? uc->uc_drv->name :"<no uclass>" ); + +if (!uc) { +puts ("\n" ); +continue ; + } + + i =0 ; + uclass_foreach_dev(udev, uc) { +if (udev->driver != entry) +continue ; +if (i) +printf ("%-51.51s" ,"" ); + +printf ("%-25.25s\n" , udev->name); + i++; + } +if (!i) +puts ("<none>\n" ); + } +} + +void dm_dump_static_driver_info (void ) +{ + struct driver_info *drv = ll_entry_start(struct driver_info, + driver_info); + const int n_ents = ll_entry_count(struct driver_info, driver_info); +struct driver_info *entry; + +puts ("Driver Address\n" ); +puts ("---------------------------------\n" ); +for (entry = drv; entry != drv + n_ents; entry++) { +printf ("%-25.25s @%08lx\n" , entry->name, + (ulong )map_to_sysmem (entry->platdata)); + } +}include/dm/util.h +6
-0@@ -42,6 +42,12 @@ static inline void dm_dump_devres(void)/* Dump out a list of drivers */ void dm_dump_drivers (void ); +/* Dump out a list with each driver's compatibility strings */ +void dm_dump_driver_compat (void ); + +/* Dump out a list of drivers with static platform data */ +void dm_dump_static_driver_info (void ); +/** * Check if an of node should be or was bound before relocation. * test/py/tests/test_dm.py +2
-2@@ -4,14 +4,32 @@ import pytest @pytest.mark.buildconfigspec('cmd_dm') -def test_dm_drivers(u_boot_console): - """Test that each driver in `dm tree` is also listed in `dm drivers`.""" +def test_dm_compat(u_boot_console): + """Test that each driver in `dm tree` is also listed in `dm compat`."""
test/py/tests/test_dm.py line 18
Quoted 10 lines
test/py/tests/test_dm.py +4
-0response = u_boot_console.run_command('dm tree') driver_index = response.find('Driver') assert driver_index != -1 drivers = (line[driver_index:].split()[0] for line in response[:-1].split('\n')[2:]) + response = u_boot_console.run_command('dm compat') + for driver in drivers: + assert driver in response +
Why is the above marked as being added? These lines are present in the patch which adds the original test.
Quoted 8 lines
test/py/tests/test_dm.py +7
-0+ at pytest.mark.buildconfigspec('cmd_dm') +def test_dm_drivers(u_boot_console): + """Test that each driver in `dm compat` is also listed in `dm drivers`.""" + response = u_boot_console.run_command('dm compat') + drivers = (line[:20].rstrip() for line in response[:-1].split('\n')[2:]) + response = u_boot_console.run_command('dm drivers') + for driver in drivers:
test/py/tests/test_dm.py line 35
Quoted 10 lines
test/py/tests/test_dm.py +7
-0+ assert driver in response + + at pytest.mark.buildconfigspec('cmd_dm') +def test_dm_static(u_boot_console): + """Test that each driver in `dm static` is also listed in `dm drivers`.""" + response = u_boot_console.run_command('dm static') + drivers = (line[:25].rstrip() for line in response[:-1].split('\n')[2:]) response = u_boot_console.run_command('dm drivers') for driver in drivers: assert driver in response
--Sean
PATCH v2 3/3 cmd: dm: Fixed/Added DM driver listing subcommands
Hi Sean,
On 3/19/20 7:37 PM, Sean Anderson wrote:
<snip>
Quoted 18 lines
Quoted 18 lines
test/py/tests/test_dm.py +2
-2@@ -4,14 +4,32 @@ import pytest @pytest.mark.buildconfigspec('cmd_dm') -def test_dm_drivers(u_boot_console): - """Test that each driver in `dm tree` is also listed in `dm drivers`.""" +def test_dm_compat(u_boot_console): + """Test that each driver in `dm tree` is also listed in `dm compat`.""" response = u_boot_console.run_command('dm tree') driver_index = response.find('Driver') assert driver_index != -1 drivers = (line[driver_index:].split()[0] for line in response[:-1].split('\n')[2:])
Quoted 8 lines
test/py/tests/test_dm.py line 18
Quoted 4 lines
test/py/tests/test_dm.py +4
-0+ response = u_boot_console.run_command('dm compat') + for driver in drivers: + assert driver in response +Why is the above marked as being added? These lines are present in the patch which adds the original test.
Well spotted! I had to give it a second look before I grasped what happened there... My tests were all based on yours, and it turns out that the last 4 lines of my last test, test_dm_static(), exactly matches those 4 lines in your original patch. And as I had changed the command to run in your test from "dm driver" to "dm compat", git decided to just insert all of my changes in one block in the middle of what was originally your test. At the bottom of the patch you can still see your original code:
+ at pytest.mark.buildconfigspec('cmd_dm')
+def test_dm_static(u_boot_console):
+ """Test that each driver in dm static is also listed in `dm
drivers`."""
+ response = u_boot_console.run_command('dm static')
+ drivers = (line[:25].rstrip() for line in
response[:-1].split('\n')[2:])
response = u_boot_console.run_command('dm drivers') for driver in drivers:
assert driver in response
Best regards,
Niel Fourie
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-21 Fax: +49-8142-66989-80 Email: lusus at denx.de
PATCH v2 3/3 cmd: dm: Fixed/Added DM driver listing subcommands
In reply to Niel FourieQuoted 22 lines · Niel Fourie
Renamed dm "drivers" subcommand to "compat" (as it listed compatibility strings) and prevent it from segfaulting when drivers have no
of_matchpopulated.Added a new "drivers" subcommand to dump a list of all known DM drivers and for each, their uclass id, uclass driver and names of attached devices.
Added a new "static" subcommand to dump a list of DM drivers with statically defined platform data.
Signed-off-by Niel Fourie <[email protected]>CC Simon Glass <[email protected]>CC Sean Anderson <[email protected]>---
Depends on: https://patchwork.ozlabs.org/patch/1234460/Changes in v2:
- Add/extend Python tests
- Fixed minor formatting/typographical errors
Quoted 5 lines
cmd/dm.c | 22 +++++++++++++++- drivers/core/dump.c | 55 +++++++++++++++++++++++++++++++++++++++- include/dm/util.h | 6 +++++ test/py/tests/test_dm.py | 22 ++++++++++++++-- 4 files changed, 101 insertions(+), 4 deletions(-)
I'm not quite sold on the name 'static' here, but I suppose it makes sense.