Skip to contentSkip to conversation

rtlwifi: v88 firmware files for rtl8192cu

PATCH In review Reto Schneider 2 participants 4 messages Mar 20, 2020 – Mar 23, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rtlwifi: v88 firmware files for rtl8192cu

The vendor driver rtl8188C_8192C_usb_linux_v4.0.9_25039.20171107 includes new firmware files. These were extracted from data statements in that driver to form these files.

Source:
File: driver/hal/rtl8192c/usb/Hal8192CUHWImg.c
Variables (CONFIG_BT_COEXISTENCE not set):
- Rtl8192CUFwTSMCImgArray
- Rtl8192CUFwUMCACutImgArray
- Rtl8192CUFwUMCBCutImgArray

Please note: I am unsure about the relevance of rtlwifi/rtl8192cufw.bin and if and where from this one should be updated.

---
 rtlwifi/rtl8192cufw_A.bin    | Bin 16116 -> 16126 bytes
 rtlwifi/rtl8192cufw_B.bin    | Bin 16096 -> 16096 bytes
 rtlwifi/rtl8192cufw_TMSC.bin | Bin 16116 -> 16126 bytes
 3 files changed, 0 insertions(+), 0 deletions(-)
rtlwifi/rtl8192cufw_A.bin binary +0 -0
index 9569d0a236ae57304fa814e04dcbe9254fe0fa69..fceafc922cc2118d8ead2a6f7faf241df0ea0d00 100644
GIT binary patch
rtlwifi/rtl8192cufw_B.bin binary +0 -0
index 96089c4c9e6e5a95d06ed6e5a93bf9a4478e156d..06569e7f60cd573936546b28f2530f4ccfe68161 100644
GIT binary patch
rtlwifi/rtl8192cufw_TMSC.bin binary +0 -0
index d1b84d4886d1864e7ada9ff175a1850d32061158..ec0a0d3e544af69e452f5d1054157b493ac847e3 100644
GIT binary patch
Signature · 1 line
2.20.1
#1 lore raw
Quoted 11 lines · Reto Schneider

The vendor driver rtl8188C_8192C_usb_linux_v4.0.9_25039.20171107 includes new firmware files. These were extracted from data statements in that driver to form these files.

Source:
File: driver/hal/rtl8192c/usb/Hal8192CUHWImg.c
Variables (CONFIG_BT_COEXISTENCE not set):
- Rtl8192CUFwTSMCImgArray
- Rtl8192CUFwUMCACutImgArray
- Rtl8192CUFwUMCBCutImgArray

Quoted 2 lines

Please note: I am unsure about the relevance of rtlwifi/rtl8192cufw.bin and if and where from this one should be updated.

New firmware should be sent to [email protected], not linux-wireless. The material in the first section of this E-mail regarding the derivation of the new firmware should be added to WHENCE in the linux-firmware directory when you git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware

File rtlwifi/rtl8192cufw.bin is loaded only when the initial firmware file is missing or cannot be obtained for some reason. Ideally, it is never used, thus you can skip updating it.

Larry

#2 lore raw
Quoted 2 lines · Larry Finger

New firmware should be sent to [email protected], not linux-wireless.

For some reason I had a look at an outdated linux-firmware README.

Did and will CC linux-wireless because it is written in the README - also in the most recent version.

Quoted 4 lines

The material in the first section of this E-mail
regarding the derivation of the new firmware should be added to WHENCE in the linux-firmware directory when you git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware

I will post a new patch with this changes.

Quoted 3 lines

File rtlwifi/rtl8192cufw.bin is loaded only when the initial firmware file is missing or cannot be obtained for some reason. Ideally, it is never used, thus you can skip updating it.

What would constitute the initial firmware? One of the updated three files? Something that is stored on the chip itself?

Reto

#3 lore raw
Quoted 7 lines · Reto Schneider
Quoted 3 lines · Larry Finger

File rtlwifi/rtl8192cufw.bin is loaded only when the initial firmware file is missing or cannot be obtained for some reason. Ideally, it is never used, thus you can skip updating it.

What would constitute the initial firmware? One of the updated three files? Something that is stored on the chip itself?

I should have said "initial choice for firmware" that is based on the chip parameters, and yes that will be one of the three versions. The chip has only enough firmware on it to be able to upload the 802.11n firmware. Only the Realtek 802.11g devices (RTL8187) have on-board firmware.

Larry