Revert "package/perl-crypt-ssleay: new package"
PATCH 1/1 Revert "package/perl-crypt-ssleay: new package"
From: Thomas De Schampheleire <[email protected]>
This reverts commit 25033cfb8612c6d0f45c89806f7e0669ffbf0e8a.
This perl package is deprecated and gives following recommendations while building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into LWP::Protocol::https. This module specifies as one of its prerequisites IO::Socket::SSL which is automatically used by LWP::UserAgent unless this preference is overridden separately. IO::Socket::SSL is a more complete implementation, and, crucially, it allows hostname verification. Crypt::SSLeay does not support this. At this point, Crypt::SSLeay is maintained to support existing software that already depends on it.
However, it is possible that your software does not really depend on Crypt::SSLeay, only on the ability of LWP::UserAgent class to communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed LWP::Protocol::https and its dependencies, and do not explicitly use Net::SSL before loading LWP::UserAgent, or override the default socket class, you are probably using IO::Socket::SSL and do not really need Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a dependency on LWP::Protocol::https.
--- DEVELOPERS | 2 - package/Config.in | 1 - package/perl-crypt-ssleay/Config.in | 12 ------ .../perl-crypt-ssleay/perl-crypt-ssleay.hash | 6 --- .../perl-crypt-ssleay/perl-crypt-ssleay.mk | 18 -------- package/perl-try-tiny/perl-try-tiny.mk | 1 - .../tests/package/test_perl_crypt_ssleay.py | 43 ------------------- 7 files changed, 83 deletions(-) delete mode 100644 package/perl-crypt-ssleay/Config.in delete mode 100644 package/perl-crypt-ssleay/perl-crypt-ssleay.hash delete mode 100644 package/perl-crypt-ssleay/perl-crypt-ssleay.mk delete mode 100644 support/testing/tests/package/test_perl_crypt_ssleay.py
DEVELOPERS +0 -2
@@ -2425,7 +2425,6 @@ F: package/perl-convert-asn1/ F: package/perl-crypt-blowfish/ F: package/perl-crypt-cbc/ F: package/perl-crypt-openssl-aes/ -F: package/perl-crypt-ssleay/ F: package/perl-i18n/ F: package/perl-locale-maketext-lexicon/ F: package/perl-lwp-protocol-https/
@@ -2444,7 +2443,6 @@ F: package/perl-path-class/ F: package/pigz/ F: package/xenomai/ F: support/scripts/size-stats -F: support/testing/tests/package/test_perl_crypt_ssleay.py F: support/testing/tests/package/test_perl_lwp_protocol_https.py F: utils/size-stats-compare F: toolchain/
package/Config.in +0 -1
@@ -726,7 +726,6 @@ menu "Perl libraries/modules" source "package/perl-crypt-openssl-aes/Config.in" source "package/perl-crypt-openssl-random/Config.in" source "package/perl-crypt-openssl-rsa/Config.in" - source "package/perl-crypt-ssleay/Config.in" source "package/perl-data-dump/Config.in" source "package/perl-data-optlist/Config.in" source "package/perl-data-uuid/Config.in"
package/perl-crypt-ssleay/Config.in deleted +0 -12
@@ -1,12 +0,0 @@ -config BR2_PACKAGE_PERL_CRYPT_SSLEAY - bool "perl-crypt-ssleay" - depends on !BR2_STATIC_LIBS - select BR2_PACKAGE_OPENSSL - select BR2_PACKAGE_PERL_LWP_PROTOCOL_HTTPS # runtime - help - OpenSSL support for LWP. - - https://metacpan.org/release/Crypt-SSLeay - -comment "perl-crypt-ssleay needs a toolchain w/ dynamic library" - depends on BR2_STATIC_LIBS
package/perl-crypt-ssleay/perl-crypt-ssleay.hash deleted +0 -6
@@ -1,6 +0,0 @@ -# retrieved by scancpan from http://cpan.metacpan.org/ -md5 77d955c9056dbb12413d95d8852a9cdf Crypt-SSLeay-0.72.tar.gz -sha256 f5d34f813677829857cf8a0458623db45b4d9c2311daaebe446f9e01afa9ffe8 Crypt-SSLeay-0.72.tar.gz - -# computed by scancpan -sha256 5c21a4393be5a9d307fd1dd2274e5d261a3213272277c2b72e7321db51e4bad7 README.md
package/perl-crypt-ssleay/perl-crypt-ssleay.mk deleted +0 -18
@@ -1,18 +0,0 @@ -################################################################################ -# -# perl-crypt-ssleay -# -################################################################################ - -PERL_CRYPT_SSLEAY_VERSION = 0.72 -PERL_CRYPT_SSLEAY_SOURCE = Crypt-SSLeay-$(PERL_CRYPT_SSLEAY_VERSION).tar.gz -PERL_CRYPT_SSLEAY_SITE = $(BR2_CPAN_MIRROR)/authors/id/N/NA/NANIS -PERL_CRYPT_SSLEAY_DEPENDENCIES = \ - openssl \ - host-perl-path-class \ - host-perl-try-tiny -PERL_CRYPT_SSLEAY_LICENSE = Artistic-2.0 -PERL_CRYPT_SSLEAY_LICENSE_FILES = README.md -PERL_CRYPT_SSLEAY_DISTNAME = Crypt-SSLeay - -$(eval $(perl-package))
package/perl-try-tiny/perl-try-tiny.mk +0 -1
@@ -12,4 +12,3 @@ PERL_TRY_TINY_LICENSE_FILES = LICENCE PERL_TRY_TINY_DISTNAME = Try-Tiny $(eval $(perl-package)) -$(eval $(host-perl-package))
support/testing/tests/package/test_perl_crypt_ssleay.py deleted +0 -43
43 lines not on this page · raw message
Signature · 1 line
2.24.1
Thomas Petazzoni
AppliedPATCH 1/1 Revert "package/perl-crypt-ssleay: new package"
Quoted 34 lines · On Wed, 25 Mar 2020 10:45:59 +0100 Thomas De Schampheleire…
From: Thomas De Schampheleire <[email protected]>
This reverts commit
25033cfb8612c6d0f45c89806f7e0669ffbf0e8a.This perl package is deprecated and gives following recommendations while building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need
Crypt::SSLeay?Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisitesIO::Socket::SSLwhich is automatically used byLWP::UserAgentunless this preference is overridden separately.IO::Socket::SSLis a more complete implementation, and, crucially, it allows hostname verification.Crypt::SSLeaydoes not support this. At this point,Crypt::SSLeayis maintained to support existing software that already depends on it.However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability ofLWP::UserAgentclass to communicate with sites over SSL/TLS.If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::httpsand its dependencies, and do not explicitly useNet::SSLbefore loadingLWP::UserAgent, or override the default socket class, you are probably usingIO::Socket::SSLand do not really needCrypt::SSLeay.Before installing
Crypt::SSLeay, you may want to try specifying a dependency onLWP::Protocol::https.Signed-off-by Thomas De Schampheleire <[email protected]>
Quoted 13 lines
--- DEVELOPERS | 2 - package/Config.in | 1 - package/perl-crypt-ssleay/Config.in | 12 ------ .../perl-crypt-ssleay/perl-crypt-ssleay.hash | 6 --- .../perl-crypt-ssleay/perl-crypt-ssleay.mk | 18 -------- package/perl-try-tiny/perl-try-tiny.mk | 1 - .../tests/package/test_perl_crypt_ssleay.py | 43 ------------------- 7 files changed, 83 deletions(-) delete mode 100644 package/perl-crypt-ssleay/Config.in delete mode 100644 package/perl-crypt-ssleay/perl-crypt-ssleay.hash delete mode 100644 package/perl-crypt-ssleay/perl-crypt-ssleay.mk delete mode 100644 support/testing/tests/package/test_perl_crypt_ssleay.py
Applied to master, thanks.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com