ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
Subsystems (2)
Fabio Estevam
reviewerRFC PATCH 1/1 ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.
---
Hi,
I don't have access to this board, nor to its schematics to confirm.
Noticed this error at:
https://storage.kernelci.org/next/master/next-20200326/arm/imx_v4_v5_defconfig/gcc-8/lab-pengutronix/boot-imx27-phytec-phycard-s-rdk.html
Please help to confirm.
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +2 -2
@@ -75,8 +75,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; };
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Fabio,
-----Fabio Estevam <[email protected]> schrieb: -----
Quoted 26 lines
An: [email protected]
Von: Fabio Estevam <[email protected]>
Datum: 26.03.2020 14:50
Kopie: [email protected], [email protected], [email protected], [email protected], Fabio Estevam <[email protected]>
Betreff: [RFC PATCH] ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entriesThe I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin
MX27_PAD_I2C2_SDAalready requested by 10012000.i2c; cannot claim for 1001d000.i2c imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22 imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22Fix it by adding the correct I2C1 IOMUX entries for the
pinctrl_i2c1group.Signed-off-by Fabio Estevam <[email protected]>---
Hi,
Quoted 7 lines
I don't have access to this board, nor to its schematics to confirm.
Noticed this error at:
https://storage.kernelci.org/next/master/next-20200326/arm/imx_v4_v5_
defconfig/gcc-8/lab-pengutronix/boot-imx27-phytec-phycard-s-rdk.htmlPlease help to confirm.
I don't have a board here either but I checked the schematics and your fix looks good.
Regards,
Stefan
Quoted 24 lines
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +2
-2@@ -75,8 +75,8 @@ imx27-phycard-s-rdk { pinctrl_i2c1: i2c1grp { fsl,pins = < - MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 - MX27_PAD_I2C2_SCL__I2C2_SCL 0x0 + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 >; };Signature · 1 line
2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Fabio Estevam
reviewerHi Stefan,
Quoted 1 line · Stefan Riedmüller
I don't have a board here either but I checked the schematics and your fix looks good.
Thanks for checking.
I have just resent it without the RFC tag, added stable on Cc and the Fixes tag.
Please reply with your Reviewed-by if possible.
Thanks
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel