i2c: muxes: pca954x: add PCA9546 variant
PATCH 1/1 i2c: muxes: pca954x: add PCA9546 variant
This adds the PCA9546 4-channel i2c bus switch.
---
U-boot already supports the PCA9646 which is a pin-compatible (and mostly register compatible) replacement. I still think it's worth making the distinction and Linux actually supports the 9546 instead of the 9646 so u-boot will likely encounter dtses with 9546 in the compatible string.
drivers/i2c/muxes/Kconfig | 4 ++-- drivers/i2c/muxes/pca954x.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/i2c/muxes/Kconfig +2 -2
@@ -33,8 +33,8 @@ config I2C_MUX_PCA954x devices. It is x width I2C multiplexer which enables to partitioning I2C bus and connect multiple devices with the same address to the same I2C controller where driver handles proper routing to target i2c - device. Supported chips are PCA9543, PCA9544, PCA9547, PCA9548 and - PCA9646. + device. Supported chips are PCA9543, PCA9544, PCA9546, PCA9547, + PCA9548 and PCA9646. config I2C_MUX_GPIO tristate "GPIO-based I2C multiplexer"
drivers/i2c/muxes/pca954x.c +6 -0
@@ -18,6 +18,7 @@ DECLARE_GLOBAL_DATA_PTR;enum pca_type {PCA9543 ,PCA9544 , +PCA9546 ,PCA9547 ,PCA9548 ,PCA9646
@@ -48,6 +49,10 @@ static const struct chip_desc chips[] = { .muxtype = pca954x_ismux, .width = 4, }, + [PCA9546] = { + .muxtype = pca954x_isswi, + .width = 4, + }, [PCA9547] = { .enable = 0x8, .muxtype = pca954x_ismux,
@@ -95,6 +100,7 @@ static const struct i2c_mux_ops pca954x_ops = {static const struct udevice_id pca954x_ids[] = { { .compatible ="nxp,pca9543" , .data =PCA9543 }, { .compatible ="nxp,pca9544" , .data =PCA9544 }, + { .compatible ="nxp,pca9546" , .data =PCA9546 }, { .compatible ="nxp,pca9547" , .data =PCA9547 }, { .compatible ="nxp,pca9548" , .data =PCA9548 }, { .compatible ="nxp,pca9646" , .data =PCA9646 },
Signature · 1 line
2.25.1
PATCH 1/1 i2c: muxes: pca954x: add PCA9546 variant
Hi Chris,
Quoted 3 lines · Chris Packham
This adds the PCA9546 4-channel i2c bus switch.
Signed-off-by Chris Packham <[email protected]>
Signature · 1 line
Luca
PATCH 1/1 i2c: muxes: pca954x: add PCA9546 variant
In reply to Chris PackhamHello Chris,
Am 01.04.2020 um 04:55 schrieb Chris Packham:
Quoted 10 lines
This adds the PCA9546 4-channel i2c bus switch.
Signed-off-by Chris Packham <[email protected]>---
U-boot already supports the PCA9646 which is a pin-compatible (and mostly register compatible) replacement. I still think it's worth making the distinction and Linux actually supports the 9546 instead of the 9646 so u-boot will likely encounter dtses with 9546 in the compatible string.
Quoted 3 lines
drivers/i2c/muxes/Kconfig | 4 ++-- drivers/i2c/muxes/pca954x.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 1/1 i2c: muxes: pca954x: add PCA9546 variant
In reply to Chris PackhamHello Chris,
Am 01.04.2020 um 04:55 schrieb Chris Packham:
Quoted 10 lines
This adds the PCA9546 4-channel i2c bus switch.
Signed-off-by Chris Packham <[email protected]>---
U-boot already supports the PCA9646 which is a pin-compatible (and mostly register compatible) replacement. I still think it's worth making the distinction and Linux actually supports the 9546 instead of the 9646 so u-boot will likely encounter dtses with 9546 in the compatible string.
Quoted 3 lines
drivers/i2c/muxes/Kconfig | 4 ++-- drivers/i2c/muxes/pca954x.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-)
Applied to u-boot-i2c master, thanks!
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de