drm/amdgpu/powerplay: using the FCLK DPM table to set the MCLK
Subsystems (2)
PATCH 1/1 drm/amdgpu/powerplay: using the FCLK DPM table to set the MCLK
From: "[email protected]" <[email protected]>
1,Using the FCLK DPM table to set the MCLK for DPM states consist of three entities:
FCLK
UCLK
MEMCLK
All these three clk change together, MEMCLK from FCLK, so use the fclk frequency.
2,we should show the current working clock freqency from clock table metric
Change-Id Ia45f3069fc7ae56db495cb5a3865e2c50c550774
Signed-off-by Yuxian Dai <[email protected]>
--- drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 7 +++++++ drivers/gpu/drm/amd/powerplay/renoir_ppt.h | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/powerplay/renoir_ppt.c +7 -0
@@ -239,6 +239,7 @@ static int renoir_print_clk_levels(struct smu_context *smu,uint32_t cur_value =0 , value =0 , count =0 , min =0 , max =0 ;DpmClocks_t *clk_table = smu->smu_table.clocks_table;SmuMetrics_t metrics; +bool cur_value_match_level = false;if (!clk_table || clk_type >=SMU_CLK_COUNT )return -EINVAL ;
@@ -297,7 +298,13 @@ static int renoir_print_clk_levels(struct smu_context *smu,GET_DPM_CUR_FREQ (clk_table, clk_type, i, value); size +=sprintf (buf + size,"%d: %uMhz %s\n" , i, value, cur_value == value ?"*" :"" ); +if (cur_value == value) + cur_value_match_level = true; } + +if (!cur_value_match_level) + size +=sprintf (buf + size," %uMhz *\n" ,cur_value); +return size; }
drivers/gpu/drm/amd/powerplay/renoir_ppt.h +1 -1
@@ -37,7 +37,7 @@ extern void renoir_set_ppt_funcs(struct smu_context *smu); freq = table->SocClocks[dpm_level].Freq; \break ; \case SMU_MCLK : \ - freq = table->MemClocks[dpm_level].Freq; \ + freq = table->FClocks[dpm_level].Freq; \break ; \case SMU_DCEFCLK : \ freq = table->DcfClocks[dpm_level].Freq; \
Signature · 6 lines
2.17.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx