Skip to contentSkip to conversation

4.4.218-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 97 messages Apr 1, 2020 – Apr 2, 2020

Subsystems (2)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/91 spi: qup: call spi_qup_pm_resume_runtime before suspending

In reply to Greg Kroah-Hartman

From: Yuji Sasaki <[email protected]>

[ Upstream commit 136b5cd2e2f97581ae560cff0db2a3b5369112da ]

spi_qup_suspend() will cause synchronous external abort when runtime suspend is enabled and applied, as it tries to access SPI controller register while clock is already disabled in spi_qup_pm_suspend_runtime().

---
 drivers/spi/spi-qup.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/spi/spi-qup.c +5 -0
index 810a7fae34798..2487a91c4cfdb 100644
@@ -961,6 +961,11 @@ static int spi_qup_suspend(struct device *device)
 	struct spi_qup *controller = spi_master_get_devdata(master);
 	int ret;
 
+	if (pm_runtime_suspended(device)) {
+		ret = spi_qup_pm_resume_runtime(device);
+		if (ret)
+			return ret;
+	}
 	ret = spi_master_suspend(master);
 	if (ret)
 		return ret;
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/91 USB: serial: option: add ME910G1 ECM composition 0x110b

In reply to Greg Kroah-Hartman

From: Daniele Palmas <[email protected]>

commit 8e852a7953be2a6ee371449f7257fe15ace6a1fc upstream.

Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1172,6 +1172,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff),	/* Telit ME910G1 */
 	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110b, 0xff),	/* Telit ME910G1 (ECM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
author maintainer
#11 lore raw

PATCH 11/91 usb: host: xhci-plat: add a shutdown

In reply to Greg Kroah-Hartman

From: Ran Wang <[email protected]>

commit b433e340e7565110b0ce9ca4b3e26f4b97a1decf upstream.

When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot.

---
 drivers/usb/host/xhci-plat.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/host/xhci-plat.c +1 -0
@@ -284,6 +284,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
+	.shutdown = usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = DEV_PM_OPS,
author maintainer
#12 lore raw

PATCH 12/91 USB: serial: pl2303: add device-id for HP LD381

In reply to Greg Kroah-Hartman

From: Scott Chen <[email protected]>

commit cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream.

Add a device id for HP LD381 Display
LD381: 03f0:0f7f

---
 drivers/usb/serial/pl2303.c |    1 +
 drivers/usb/serial/pl2303.h |    1 +
 2 files changed, 2 insertions(+)
drivers/usb/serial/pl2303.c +1 -0
@@ -88,6 +88,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
drivers/usb/serial/pl2303.h +1 -0
@@ -128,6 +128,7 @@
 #define HP_LM920_PRODUCT_ID	0x026b
 #define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LD381_PRODUCT_ID	0x0f7f
 #define HP_LCM220_PRODUCT_ID	0x3139
 #define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524
author maintainer
#13 lore raw

PATCH 13/91 ALSA: line6: Fix endless MIDI read loop

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit d683469b3c93d7e2afd39e6e1970f24700eb7a68 upstream.

The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well.

This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly.

The bug was reported by syzkaller.

---
 sound/usb/line6/driver.c  |    2 +-
 sound/usb/line6/midibuf.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
sound/usb/line6/driver.c +1 -1
@@ -283,7 +283,7 @@ static void line6_data_received(struct u
 		    line6_midibuf_read(mb, line6->buffer_message,
 				       LINE6_MESSAGE_MAXLEN);
 
-		if (done == 0)
+		if (done <= 0)
 			break;
 
 		line6->message_length = done;
sound/usb/line6/midibuf.c +1 -1
@@ -163,7 +163,7 @@ int line6_midibuf_read(struct midi_buffe
 			int midi_length_prev =
 			    midibuf_message_length(this->command_prev);
 
-			if (midi_length_prev > 0) {
+			if (midi_length_prev > 1) {
 				midi_length = midi_length_prev - 1;
 				repeat = 1;
 			} else
author maintainer
#15 lore raw

PATCH 15/91 ALSA: seq: oss: Fix running status after receiving sysex

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 6c3171ef76a0bad892050f6959a7eac02fb16df7 upstream.

This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message.

Again the fix is to clear the running status after handling the sysex.

---
 sound/core/seq/oss/seq_oss_midi.c |    1 +
 1 file changed, 1 insertion(+)
sound/core/seq/oss/seq_oss_midi.c +1 -0
@@ -615,6 +615,7 @@ send_midi_event(struct seq_oss_devinfo *
 		len = snd_seq_oss_timer_start(dp->timer);
 	if (ev->type == SNDRV_SEQ_EVENT_SYSEX) {
 		snd_seq_oss_readq_sysex(dp->readq, mdev->seq_device, ev);
+		snd_midi_event_reset_decode(mdev->coder);
 	} else {
 		len = snd_midi_event_decode(mdev->coder, msg, sizeof(msg), ev);
 		if (len > 0)
author maintainer
#14 lore raw

PATCH 14/91 ALSA: seq: virmidi: Fix running status after receiving sysex

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 4384f167ce5fa7241b61bb0984d651bc528ddebe upstream.

The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued.

Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path.

---
 sound/core/seq/seq_virmidi.c |    1 +
 1 file changed, 1 insertion(+)
sound/core/seq/seq_virmidi.c +1 -0
@@ -95,6 +95,7 @@ static int snd_virmidi_dev_receive_event
 			if ((ev->flags & SNDRV_SEQ_EVENT_LENGTH_MASK) != SNDRV_SEQ_EVENT_LENGTH_VARIABLE)
 				continue;
 			snd_seq_dump_var_event(ev, (snd_seq_dump_func_t)snd_rawmidi_receive, vmidi->substream);
+			snd_midi_event_reset_decode(vmidi->parser);
 		} else {
 			len = snd_midi_event_decode(vmidi->parser, msg, sizeof(msg), ev);
 			if (len > 0)
author maintainer
#16 lore raw

PATCH 16/91 ALSA: pcm: oss: Avoid plugin buffer overflow

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit f2ecf903ef06eb1bbbfa969db9889643d487e73a upstream.

Each OSS PCM plugins allocate its internal buffer per pre-calculation of the max buffer size through the chain of plugins (calling src_frames and dst_frames callbacks). This works for most plugins, but the rate plugin might behave incorrectly. The calculation in the rate plugin involves with the fractional position, i.e. it may vary depending on the input position. Since the buffer size pre-calculation is always done with the offset zero, it may return a shorter size than it might be; this may result in the out-of-bound access as spotted by fuzzer.

This patch addresses those possible buffer overflow accesses by simply setting the upper limit per the given buffer size for each plugin before src_frames() and after dst_frames() calls.

---
 sound/core/oss/pcm_plugin.c |    8 ++++++++
 1 file changed, 8 insertions(+)
sound/core/oss/pcm_plugin.c +8 -0
@@ -209,6 +209,8 @@ snd_pcm_sframes_t snd_pcm_plug_client_si
 	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin && drv_frames > 0) {
+			if (drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames)
 				drv_frames = plugin->src_frames(plugin, drv_frames);
@@ -220,6 +222,8 @@ snd_pcm_sframes_t snd_pcm_plug_client_si
 			plugin_next = plugin->next;
 			if (plugin->dst_frames)
 				drv_frames = plugin->dst_frames(plugin, drv_frames);
+			if (drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else
@@ -248,11 +252,15 @@ snd_pcm_sframes_t snd_pcm_plug_slave_siz
 				if (frames < 0)
 					return frames;
 			}
+			if (frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin) {
+			if (frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames) {
 				frames = plugin->src_frames(plugin, frames);
author maintainer
#2 lore raw

PATCH 2/91 powerpc: Include .BTF section

In reply to Greg Kroah-Hartman

From: Naveen N. Rao <[email protected]>

[ Upstream commit cb0cc635c7a9fa8a3a0f75d4d896721819c63add ]

Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld:
ld: warning: orphan section .BTF' from .btf.vmlinux.bin.o' being placed in section `.BTF'

Include .BTF section in vmlinux explicitly to fix the same.

---
 arch/powerpc/kernel/vmlinux.lds.S | 6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/kernel/vmlinux.lds.S +6 -0
index 876ac9d52afcb..9b1e297be6730 100644
@@ -255,6 +255,12 @@ SECTIONS
 		*(.branch_lt)
 	}
 
+#ifdef CONFIG_DEBUG_INFO_BTF
+	.BTF : AT(ADDR(.BTF) - LOAD_OFFSET) {
+		*(.BTF)
+	}
+#endif
+
 	.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
 		*(.opd)
 	}
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 3/91 ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes

In reply to Greg Kroah-Hartman

From: Kishon Vijay Abraham I <[email protected]>

[ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ]

'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI devices not described in the DT. Certain DRA7 platforms (e.g., DRA76) has RAM above 32-bit boundary (accessible with LPAE config) though the PCIe bridge will be able to access only 32-bits. Add 'dma-ranges' property in PCIe RC DT nodes to indicate the host bridge can access only 32 bits.

---
 arch/arm/boot/dts/dra7.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/dra7.dtsi +2 -0
index e6a3a94bac693..2cdaa38c114e8 100644
@@ -227,6 +227,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
@@ -263,6 +264,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/91 drm/exynos: dsi: propagate error value and silence meaningless warning

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]

Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe.

---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +3 -2
index 12b03b3647034..1ee0b70472fd8 100644
@@ -1899,8 +1899,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
 				      dsi->supplies);
 	if (ret) {
-		dev_info(dev, "failed to get regulators: %d\n", ret);
-		return -EPROBE_DEFER;
+		if (ret != -EPROBE_DEFER)
+			dev_info(dev, "failed to get regulators: %d\n", ret);
+		return ret;
 	}
 
 	dsi->clks = devm_kzalloc(dev,
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/91 drm/exynos: dsi: fix workaround for the legacy clock name

In reply to Greg Kroah-Hartman

From: Marek Szyprowski <[email protected]>

[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]

Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module:

Unable to handle kernel paging request at virtual address bf047978
 pgd = (ptrval)
 [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
 Internal error: Oops: 80f [#1] SMP ARM
 Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
 CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
 videodev: Linux video capture interface: v2.00
 Hardware name: Samsung Exynos (Flattened Device Tree)
 PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
 LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
 ...
 Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
 ...
 [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
 [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
 [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
 [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
 [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
 [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
 [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
 [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
 [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
 [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
 [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
 [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
 [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
 [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
 Exception stack(0xd979bfa8 to 0xd979bff0)
 ...
 ---[ end trace db16efe05faab470 ]---
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/exynos/exynos_drm_dsi.c +4 -3
index 1ee0b70472fd8..77ff3eed65d62 100644
@@ -1914,9 +1914,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
 		if (IS_ERR(dsi->clks[i])) {
 			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
-				strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
-				i--;
-				continue;
+				dsi->clks[i] = devm_clk_get(dev,
+							OLD_SCLK_MIPI_CLK_NAME);
+				if (!IS_ERR(dsi->clks[i]))
+					continue;
 			}
 
 			dev_info(dev, "failed to get the clock: %s\n",
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/91 altera-stapl: altera_get_note: prevent write beyond end of key

In reply to Greg Kroah-Hartman

From: Daniel Axtens <[email protected]>

[ Upstream commit 3745488e9d599916a0b40d45d3f30e3d4720288e ]

altera_get_note is called from altera_init, where key is kzalloc(33).

When the allocation functions are annotated to allow the compiler to see the sizes of objects, and with FORTIFY_SOURCE, we see:

In file included from drivers/misc/altera-stapl/altera.c:14:0:
In function ‘strlcpy’,
inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5:
include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter

    __write_overflow();
    ^~~~~~~~~~~~~~~~~~

That refers to this code in altera_get_note:

    if (key != NULL)
            strlcpy(key, &p[note_strings +
                            get_unaligned_be32(
                            &p[note_table + (8 * i)])],
                    length);

The error triggers because the length of 'key' is 33, but the copy uses length supplied as the 'length' parameter, which is always
256. Split the size parameter into key_len and val_len, and use the appropriate length depending on what is being copied.

Detected by compiler error, only compile-tested.

---
 drivers/misc/altera-stapl/altera.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/misc/altera-stapl/altera.c +6 -6
index 494e263daa748..b7ee8043a133e 100644
@@ -2126,8 +2126,8 @@ static int altera_execute(struct altera_state *astate,
 	return status;
 }
 
-static int altera_get_note(u8 *p, s32 program_size,
-			s32 *offset, char *key, char *value, int length)
+static int altera_get_note(u8 *p, s32 program_size, s32 *offset,
+			   char *key, char *value, int keylen, int vallen)
 /*
  * Gets key and value of NOTE fields in the JBC file.
  * Can be called in two modes:  if offset pointer is NULL,
@@ -2184,7 +2184,7 @@ static int altera_get_note(u8 *p, s32 program_size,
 						&p[note_table + (8 * i) + 4])];
 
 				if (value != NULL)
-					strlcpy(value, value_ptr, length);
+					strlcpy(value, value_ptr, vallen);
 
 			}
 		}
@@ -2203,13 +2203,13 @@ static int altera_get_note(u8 *p, s32 program_size,
 				strlcpy(key, &p[note_strings +
 						get_unaligned_be32(
 						&p[note_table + (8 * i)])],
-					length);
+					keylen);
 
 			if (value != NULL)
 				strlcpy(value, &p[note_strings +
 						get_unaligned_be32(
 						&p[note_table + (8 * i) + 4])],
-					length);
+					vallen);
 
 			*offset = i + 1;
 		}
@@ -2463,7 +2463,7 @@ int altera_init(struct altera_config *config, const struct firmware *fw)
 			__func__, (format_version == 2) ? "Jam STAPL" :
 						"pre-standardized Jam 1.1");
 		while (altera_get_note((u8 *)fw->data, fw->size,
-					&offset, key, value, 256) == 0)
+					&offset, key, value, 32, 256) == 0)
 			printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
 					__func__, key, value);
 	}
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/91 usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit 75d7676ead19b1fbb5e0ee934c9ccddcb666b68c upstream.

We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working:

[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout

This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this.

Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id).

This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices.

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/core/quirks.c +3 -0
@@ -232,6 +232,9 @@ static const struct usb_device_id usb_qu
 	/* Realtek hub in Dell WD19 (Type-C) */
 	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Generic RTL8153 based ethernet adapters */
+	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
author maintainer
#8 lore raw

PATCH 8/91 USB: Disable LPM on WD19s Realtek Hub

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

commit b63e48fb50e1ca71db301ca9082befa6f16c55c4 upstream.

Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0.

Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub.

---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/core/quirks.c +3 -0
@@ -229,6 +229,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Realtek hub in Dell WD19 (Type-C) */
+	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.4.218-rc1 review

This is the start of the stable review cycle for the 4.4.218 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.218-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.218-rc1

disconnect3d <[email protected]>
perf map: Fix off by one in strncpy() size argument

Marek Vasut <[email protected]>
net: ks8851-ml: Fix IO operations, again

Greg Kroah-Hartman <[email protected]>
bpf: Explicitly memset the bpf_attr structure

Eric Biggers <[email protected]>
vt: vt_ioctl: fix use-after-free in vt_in_use()

Peter Zijlstra <[email protected]>
locking/atomic, kref: Add kref_read()

Eric Biggers <[email protected]>
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console

Eric Biggers <[email protected]>
vt: vt_ioctl: remove unnecessary console allocation checks

Jiri Slaby <[email protected]>
vt: switch vt_dont_switch to bool

Jiri Slaby <[email protected]>
vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines

Jiri Slaby <[email protected]>
vt: selection, introduce vc_is_sel

Johan Hovold <[email protected]>
media: xirlink_cit: add missing descriptor sanity checks

Johan Hovold <[email protected]>
media: stv06xx: add missing descriptor sanity checks

Johan Hovold <[email protected]>
media: dib0700: fix rc endpoint lookup

Johan Hovold <[email protected]>
media: ov519: add missing endpoint sanity checks

Eric Biggers <[email protected]>
libfs: fix infoleak in simple_attr_read()

Qiujun Huang <[email protected]>
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback

Larry Finger <[email protected]>
staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table

Johan Hovold <[email protected]>
media: usbtv: fix control-message timeouts

Johan Hovold <[email protected]>
media: flexcop-usb: fix endpoint sanity check

Mans Rullgard <[email protected]>
usb: musb: fix crash with highmen PIO and usbmon

Qiujun Huang <[email protected]>
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback

Matthias Reichl <[email protected]>
USB: cdc-acm: restore capability check order

Pawel Dembicki <[email protected]>
USB: serial: option: add Wistron Neweb D19Q1

Pawel Dembicki <[email protected]>
USB: serial: option: add BroadMobi BM806U

Pawel Dembicki <[email protected]>
USB: serial: option: add support for ASKEY WWHC050

Masami Hiramatsu <[email protected]>
tools: Let O= makes handle a relative path with -C option

Torsten Hilbrich <[email protected]>
vti6: Fix memory leak of skb if input policy check fails

YueHaibing <[email protected]>
xfrm: policy: Fix doulbe free in xfrm_policy_timer

Xin Long <[email protected]>
xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire

Xin Long <[email protected]>
xfrm: fix uctx len check in verify_sec_ctx_len

Nicolas Dichtel <[email protected]>
vti[6]: fix packet tx through bpf_redirect() in XinY cases

Edward Cree <[email protected]>
genirq: Fix reference leaks on irq affinity notifiers

Johannes Berg <[email protected]>
mac80211: mark station unauthorized before key removal

Martin K. Petersen <[email protected]>
scsi: sd: Fix optimal I/O size for devices that change reported values

Dirk Mueller <[email protected]>
scripts/dtc: Remove redundant YYLOC global declaration

Masami Hiramatsu <[email protected]>
perf probe: Do not depend on dwfl_module_addrsym()

Chuhong Yuan <[email protected]>
i2c: hix5hd2: add missed clk_disable_unprepare in remove

Dominik Czarnota <[email protected]>
sxgbe: Fix off by one in samsung driver strncpy size arg

Nicolas Cavallari <[email protected]>
mac80211: Do not send mesh HWMP PREQ if HWMP is disabled

Wen Xiong <[email protected]>
scsi: ipr: Fix softlockup when rescanning devices in petitboot

Madalin Bucur <[email protected]>
dt-bindings: net: FMan erratum A050385

Mike Gilbert <[email protected]>
cpupower: avoid multiple definition with gcc -fno-common

Sabrina Dubroca <[email protected]>
net: ipv4: don't let PMTU updates increase route MTU

Matthew Wilcox <[email protected]>
drivers/hwspinlock: use correct radix tree API

Sean Christopherson <[email protected]>
KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr

Jonas Gorski <[email protected]>
uapi glibc compat: fix outer guard of net device flags enum

Alaa Hleihel <[email protected]>
IB/ipoib: Do not warn if IPoIB debugfs doesn't exist

Eugenio Pérez <[email protected]>
vhost: Check docket sk_family instead of call getname

Taehee Yoo <[email protected]>
hsr: set .netnsok flag

Taehee Yoo <[email protected]>
hsr: add restart routine into hsr_get_node_list()

Taehee Yoo <[email protected]>
hsr: use rcu_read_lock() in hsr_get_node_{list/status}()

Taehee Yoo <[email protected]>
vxlan: check return value of gro_cells_init()

Oliver Hartkopp <[email protected]>
slcan: not call free_netdev before rtnl_unlock in slcan_open

Dan Carpenter <[email protected]>
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()

Cong Wang <[email protected]>
net_sched: keep alloc_hash updated after hash allocation

Cong Wang <[email protected]>
net_sched: cls_route: remove the right filter from hashtable

Florian Fainelli <[email protected]>
net: dsa: Fix duplicate frames flooded by learning

Taehee Yoo <[email protected]>
hsr: fix general protection fault in hsr_addr_is_self()

Lyude Paul <[email protected]>
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"

Cristian Marussi <[email protected]>
arm64: smp: fix smp_send_stop() behaviour

Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix pop noise on ALC225

Thomas Gleixner <[email protected]>
futex: Unbreak futex hashing

Peter Zijlstra <[email protected]>
futex: Fix inode life-time issue

Nathan Chancellor <[email protected]>
kbuild: Disable -Wpointer-to-enum-cast

Anthony Mallet <[email protected]>
USB: cdc-acm: fix rounding error in TIOCSSERIAL

Anthony Mallet <[email protected]>
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL

Joerg Roedel <[email protected]>
x86/mm: split vmalloc_sync_all()

Vlastimil Babka <[email protected]>
mm, slub: prevent kmalloc_node crashes and memory leaks

Linus Torvalds <[email protected]>
mm: slub: be more careful about the double cmpxchg of freelist

Chunguang Xu <[email protected]>
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event

Corentin Labbe <[email protected]>
rtc: max8907: add missing select REGMAP_IRQ

Alexander Shishkin <[email protected]>
intel_th: Fix user-visible error codes

Samuel Thibault <[email protected]>
staging/speakup: fix get_word non-space look-ahead

Michael Straube <[email protected]>
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2

Takashi Iwai <[email protected]>
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks

Takashi Iwai <[email protected]>
ALSA: pcm: oss: Avoid plugin buffer overflow

Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix running status after receiving sysex

Takashi Iwai <[email protected]>
ALSA: seq: virmidi: Fix running status after receiving sysex

Takashi Iwai <[email protected]>
ALSA: line6: Fix endless MIDI read loop

Scott Chen <[email protected]>
USB: serial: pl2303: add device-id for HP LD381

Ran Wang <[email protected]>
usb: host: xhci-plat: add a shutdown

Daniele Palmas <[email protected]>

    USB: serial: option: add ME910G1 ECM composition 0x110b

Hans de Goede <[email protected]>
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters

Kai-Heng Feng <[email protected]>
USB: Disable LPM on WD19's Realtek Hub

Daniel Axtens <[email protected]>
altera-stapl: altera_get_note: prevent write beyond end of 'key'

Marek Szyprowski <[email protected]>
drm/exynos: dsi: fix workaround for the legacy clock name

Marek Szyprowski <[email protected]>
drm/exynos: dsi: propagate error value and silence meaningless warning

Thommy Jakobsson <[email protected]>
spi/zynqmp: remove entry that causes a cs glitch

Kishon Vijay Abraham I <[email protected]>
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes

Naveen N. Rao <[email protected]>
powerpc: Include .BTF section

Yuji Sasaki <[email protected]>
spi: qup: call spi_qup_pm_resume_runtime before suspending

-------------

Diffstat:

 .../devicetree/bindings/powerpc/fsl/fman.txt       |  7 ++
 Makefile                                           |  4 +-
 arch/arm/boot/dts/dra7.dtsi                        |  2 +
 arch/arm64/kernel/smp.c                            | 17 +++-
 arch/powerpc/kernel/vmlinux.lds.S                  |  6 ++
 arch/x86/kvm/vmx.c                                 |  4 +-
 arch/x86/mm/fault.c                                | 26 +++++-
 drivers/acpi/apei/ghes.c                           |  2 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              | 15 +---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c            | 12 +--
 drivers/hwspinlock/hwspinlock_core.c               |  2 +-
 drivers/hwtracing/intel_th/msu.c                   |  6 +-
 drivers/i2c/busses/i2c-hix5hd2.c                   |  1 +
 drivers/infiniband/ulp/ipoib/ipoib_fs.c            |  2 -
 drivers/media/usb/b2c2/flexcop-usb.c               |  6 +-
 drivers/media/usb/dvb-usb/dib0700_core.c           |  4 +-
 drivers/media/usb/gspca/ov519.c                    | 10 +++
 drivers/media/usb/gspca/stv06xx/stv06xx.c          | 19 ++++-
 drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c   |  4 +
 drivers/media/usb/gspca/xirlink_cit.c              | 18 ++++-
 drivers/media/usb/usbtv/usbtv-core.c               |  2 +-
 drivers/misc/altera-stapl/altera.c                 | 12 +--
 drivers/net/can/slcan.c                            |  3 +
 drivers/net/ethernet/micrel/ks8851_mll.c           | 56 ++++++++++++-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    |  2 +-
 drivers/net/vxlan.c                                | 11 ++-
 drivers/nfc/fdp/fdp.c                              |  5 +-
 drivers/rtc/Kconfig                                |  1 +
 drivers/scsi/ipr.c                                 |  3 +-
 drivers/scsi/ipr.h                                 |  1 +
 drivers/scsi/sd.c                                  |  4 +-
 drivers/spi/spi-qup.c                              |  5 ++
 drivers/spi/spi-zynqmp-gqspi.c                     |  3 -
 drivers/staging/rtl8188eu/os_dep/usb_intf.c        |  2 +
 drivers/staging/speakup/main.c                     |  3 +-
 drivers/staging/wlan-ng/hfa384x_usb.c              |  2 +
 drivers/tty/vt/selection.c                         |  5 ++
 drivers/tty/vt/vt.c                                | 30 ++++++-
 drivers/tty/vt/vt_ioctl.c                          | 80 ++++++++++---------
 drivers/usb/class/cdc-acm.c                        | 20 +++--
 drivers/usb/core/quirks.c                          |  6 ++
 drivers/usb/host/xhci-plat.c                       |  1 +
 drivers/usb/musb/musb_host.c                       | 17 ++--
 drivers/usb/serial/io_edgeport.c                   |  2 +-
 drivers/usb/serial/option.c                        |  8 ++
 drivers/usb/serial/pl2303.c                        |  1 +
 drivers/usb/serial/pl2303.h                        |  1 +
 drivers/vhost/net.c                                | 13 +--
 fs/inode.c                                         |  1 +
 fs/libfs.c                                         |  8 +-
 include/linux/fs.h                                 |  1 +
 include/linux/futex.h                              | 17 ++--
 include/linux/kref.h                               |  5 ++
 include/linux/selection.h                          |  4 +-
 include/linux/vmalloc.h                            |  5 +-
 include/linux/vt_kern.h                            |  2 +-
 include/uapi/linux/if.h                            |  4 +-
 kernel/bpf/syscall.c                               |  3 +-
 kernel/futex.c                                     | 93 +++++++++++++---------
 kernel/irq/manage.c                                | 11 ++-
 kernel/notifier.c                                  |  2 +-
 mm/memcontrol.c                                    | 10 ++-
 mm/nommu.c                                         | 10 ++-
 mm/slub.c                                          | 32 +++++---
 mm/vmalloc.c                                       | 11 ++-
 net/dsa/tag_brcm.c                                 |  2 +
 net/hsr/hsr_framereg.c                             | 10 +--
 net/hsr/hsr_netlink.c                              | 74 +++++++++--------
 net/hsr/hsr_slave.c                                |  8 +-
 net/ipv4/Kconfig                                   |  1 +
 net/ipv4/ip_vti.c                                  | 38 +++++++--
 net/ipv4/route.c                                   |  7 +-
 net/ipv6/ip6_vti.c                                 | 34 ++++++--
 net/mac80211/mesh_hwmp.c                           |  3 +-
 net/mac80211/sta_info.c                            |  6 ++
 net/sched/cls_route.c                              |  4 +-
 net/sched/cls_tcindex.c                            |  1 +
 net/xfrm/xfrm_policy.c                             |  2 +
 net/xfrm/xfrm_user.c                               |  6 +-
 scripts/Makefile.extrawarn                         |  1 +
 scripts/dtc/dtc-lexer.l                            |  1 -
 sound/core/oss/pcm_plugin.c                        | 12 ++-
 sound/core/seq/oss/seq_oss_midi.c                  |  1 +
 sound/core/seq/seq_virmidi.c                       |  1 +
 sound/pci/hda/patch_realtek.c                      |  2 +
 sound/usb/line6/driver.c                           |  2 +-
 sound/usb/line6/midibuf.c                          |  2 +-
 tools/perf/Makefile                                |  2 +-
 tools/perf/util/map.c                              |  2 +-
 tools/perf/util/probe-finder.c                     | 11 ++-
 .../cpupower/utils/idle_monitor/amd_fam14h_idle.c  |  2 +-
 .../cpupower/utils/idle_monitor/cpuidle_sysfs.c    |  2 +-
 .../cpupower/utils/idle_monitor/cpupower-monitor.c |  2 +
 .../cpupower/utils/idle_monitor/cpupower-monitor.h |  2 +-
 tools/scripts/Makefile.include                     |  4 +-
 95 files changed, 632 insertions(+), 298 deletions(-)
author maintainer
#18 lore raw

PATCH 18/91 staging: rtl8188eu: Add device id for MERCUSYS MW150US v2

From: Michael Straube <[email protected]>

commit bb5786b9286c253557a0115bc8d21879e61b7b94 upstream.

This device was added to the stand-alone driver on github. Add it to the staging driver as well.

---
 drivers/staging/rtl8188eu/os_dep/usb_intf.c |    1 +
 1 file changed, 1 insertion(+)
drivers/staging/rtl8188eu/os_dep/usb_intf.c +1 -0
@@ -50,6 +50,7 @@ static struct usb_device_id rtw_usb_id_t
 	{USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */
 	{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
 	{USB_DEVICE(0x2357, 0x0111)}, /* TP-Link TL-WN727N v5.21 */
+	{USB_DEVICE(0x2C4E, 0x0102)}, /* MERCUSYS MW150US v2 */
 	{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
 	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
 	{}	/* Terminating entry */
author maintainer
#27 lore raw

PATCH 27/91 USB: cdc-acm: fix rounding error in TIOCSSERIAL

In reply to Greg Kroah-Hartman

From: Anthony Mallet <[email protected]>

[ Upstream commit b401f8c4f492cbf74f3f59c9141e5be3071071bb ]

By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69

With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125.

When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919

Fixes ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Cc stable <[email protected]>
---
 drivers/usb/class/cdc-acm.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
drivers/usb/class/cdc-acm.c +16 -9
index 3cb7a23e1253f..7dd2f413595eb 100644
@@ -857,6 +857,7 @@ static int set_serial_info(struct acm *acm,
 {
 	struct serial_struct new_serial;
 	unsigned int closing_wait, close_delay;
+	unsigned int old_closing_wait, old_close_delay;
 	int retval = 0;
 
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
@@ -867,18 +868,24 @@ static int set_serial_info(struct acm *acm,
 			ASYNC_CLOSING_WAIT_NONE :
 			msecs_to_jiffies(new_serial.closing_wait * 10);
 
+	/* we must redo the rounding here, so that the values match */
+	old_close_delay	= jiffies_to_msecs(acm->port.close_delay) / 10;
+	old_closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				jiffies_to_msecs(acm->port.closing_wait) / 10;
+
 	mutex_lock(&acm->port.mutex);
 
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((close_delay != acm->port.close_delay) ||
-		    (closing_wait != acm->port.closing_wait))
+	if ((new_serial.close_delay != old_close_delay) ||
+            (new_serial.closing_wait != old_closing_wait)) {
+		if (!capable(CAP_SYS_ADMIN))
 			retval = -EPERM;
-		else
-			retval = -EOPNOTSUPP;
-	} else {
-		acm->port.close_delay  = close_delay;
-		acm->port.closing_wait = closing_wait;
-	}
+		else {
+			acm->port.close_delay  = close_delay;
+			acm->port.closing_wait = closing_wait;
+		}
+	} else
+		retval = -EOPNOTSUPP;
 
 	mutex_unlock(&acm->port.mutex);
 	return retval;
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/91 kbuild: Disable -Wpointer-to-enum-cast

In reply to Greg Kroah-Hartman

From: Nathan Chancellor <[email protected]>

commit 82f2bc2fcc0160d6f82dd1ac64518ae0a4dd183f upstream.

Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when casting to enums. The kernel does this in certain places, such as device tree matches to set the version of the device being used, which allows the kernel to avoid using a gigantic union.

https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402
https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264

To avoid a ton of false positive warnings, disable this particular part of the warning, which has been split off into a separate diagnostic so that the entire warning does not need to be turned off for clang. It will be visible under W=1 in case people want to go about fixing these easily and enabling the warning treewide.

---
 scripts/Makefile.extrawarn | 1 +
 1 file changed, 1 insertion(+)
scripts/Makefile.extrawarn +1 -0
index 93e23a73b232f..11096b2fa5cb2 100644
@@ -67,5 +67,6 @@ KBUILD_CFLAGS += $(call cc-disable-warning, format)
 KBUILD_CFLAGS += $(call cc-disable-warning, sign-compare)
 KBUILD_CFLAGS += $(call cc-disable-warning, format-zero-length)
 KBUILD_CFLAGS += $(call cc-disable-warning, uninitialized)
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 endif
 endif
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/91 futex: Fix inode life-time issue

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

commit 8019ad13ef7f64be44d4f892af9c840179009254 upstream.

As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier.

This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue.

---
 fs/inode.c            |    1 
 include/linux/fs.h    |    1 
 include/linux/futex.h |   17 +++++----
 kernel/futex.c        |   89 +++++++++++++++++++++++++++++---------------------
 4 files changed, 65 insertions(+), 43 deletions(-)
fs/inode.c +1 -0
@@ -135,6 +135,7 @@ int inode_init_always(struct super_block
 	inode->i_sb = sb;
 	inode->i_blkbits = sb->s_blocksize_bits;
 	inode->i_flags = 0;
+	atomic64_set(&inode->i_sequence, 0);
 	atomic_set(&inode->i_count, 1);
 	inode->i_op = &empty_iops;
 	inode->i_fop = &no_open_fops;
include/linux/fs.h +1 -0
@@ -658,6 +658,7 @@ struct inode {
 		struct rcu_head		i_rcu;
 	};
 	u64			i_version;
+	atomic64_t		i_sequence; /* see futex */
 	atomic_t		i_count;
 	atomic_t		i_dio_count;
 	atomic_t		i_writecount;
include/linux/futex.h +10 -7
@@ -34,23 +34,26 @@ handle_futex_death(u32 __user *uaddr, st
 
 union futex_key {
 	struct {
+		u64 i_seq;
 		unsigned long pgoff;
-		struct inode *inode;
-		int offset;
+		unsigned int offset;
 	} shared;
 	struct {
+		union {
+			struct mm_struct *mm;
+			u64 __tmp;
+		};
 		unsigned long address;
-		struct mm_struct *mm;
-		int offset;
+		unsigned int offset;
 	} private;
 	struct {
+		u64 ptr;
 		unsigned long word;
-		void *ptr;
-		int offset;
+		unsigned int offset;
 	} both;
 };
 
-#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } }
+#define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = 0ULL } }
 
 #ifdef CONFIG_FUTEX
 extern void exit_robust_list(struct task_struct *curr);
kernel/futex.c +53 -36

130 lines not on this page · raw message

author maintainer
#30 lore raw

PATCH 30/91 futex: Unbreak futex hashing

In reply to Greg Kroah-Hartman

From: Thomas Gleixner <[email protected]>

commit 8d67743653dce5a0e7aa500fcccb237cde7ad88e upstream.

The recent futex inode life time fix changed the ordering of the futex key union struct members, but forgot to adjust the hash function accordingly,

As a result the hashing omits the leading 64bit and even hashes beyond the futex key causing a bad hash distribution which led to a ~100% performance regression.

Hand in the futex key pointer instead of a random struct member and make the size calculation based of the struct offset.

---
 kernel/futex.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/futex.c +2 -2
@@ -378,9 +378,9 @@ static inline int hb_waiters_pending(str
  */
 static struct futex_hash_bucket *hash_futex(union futex_key *key)
 {
-	u32 hash = jhash2((u32*)&key->both.word,
-			  (sizeof(key->both.word)+sizeof(key->both.ptr))/4,
+	u32 hash = jhash2((u32 *)key, offsetof(typeof(*key), both.offset) / 4,
 			  key->both.offset);
+
 	return &futex_queues[hash & (futex_hashsize - 1)];
 }
 
author maintainer
#31 lore raw

PATCH 31/91 ALSA: hda/realtek: Fix pop noise on ALC225

In reply to Greg Kroah-Hartman

From: Kai-Heng Feng <[email protected]>

commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757 upstream.

Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot.

So partially revert this commit for ALC225 to fix the regression.

---
 sound/pci/hda/patch_realtek.c |    2 ++
 1 file changed, 2 insertions(+)
sound/pci/hda/patch_realtek.c +2 -0
@@ -6333,6 +6333,8 @@ static int patch_alc269(struct hda_codec
 		alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
 		break;
 	case 0x10ec0225:
+		codec->power_save_node = 1;
+		/* fall through */
 	case 0x10ec0295:
 	case 0x10ec0299:
 		spec->codec_variant = ALC269_TYPE_ALC225;
author maintainer
#32 lore raw

PATCH 32/91 arm64: smp: fix smp_send_stop() behaviour

In reply to Greg Kroah-Hartman

From: Cristian Marussi <[email protected]>

commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream.

On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure.

[  186.700083] CPU3: shutdown
[  187.075462] CPU2: shutdown
[  187.162869] CPU1: shutdown
[  188.689998] ------------[ cut here ]------------
[  188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[  188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  188.692444] Modules linked in:
[  188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104
[  188.693175] Hardware name: Foundation-v8A (DT)
[  188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[  188.694183] pc : has_cpuid_feature+0xf0/0x348
[  188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8
[  188.694410] sp : ffff800011b1bf60
[  188.694536] x29: ffff800011b1bf60 x28: 0000000000000000
[  188.694707] x27: 0000000000000000 x26: 0000000000000000
[  188.694801] x25: 0000000000000000 x24: ffff80001189a25c
[  188.694905] x23: 0000000000000000 x22: 0000000000000000
[  188.694996] x21: ffff8000114aa018 x20: ffff800011156a38
[  188.695089] x19: ffff800010c944a0 x18: 0000000000000004
[  188.695187] x17: 0000000000000000 x16: 0000000000000000
[  188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa
[  188.695371] x13: 0000000000000002 x12: 0000000000002592
[  188.695472] x11: 0000000000000080 x10: 00400032b5503510
[  188.695572] x9 : 0000000000000000 x8 : ffff800010c80204
[  188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001
[  188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000
[  188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8
[  188.695919] x1 : 0000000000180420 x0 : 0000000000180480
[  188.696253] Call trace:
[  188.696410]  has_cpuid_feature+0xf0/0x348
[  188.696504]  verify_local_elf_hwcaps+0x84/0xe8
[  188.696591]  check_local_cpu_capabilities+0x44/0x128
[  188.696666]  secondary_start_kernel+0xf4/0x188
[  188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[  188.698639] ---[ end trace 3f12ca47652f7b72 ]---
[  188.699160] Kernel panic - not syncing: Attempted to kill the idle task!
[  188.699546] Kernel Offset: disabled
[  188.699828] CPU features: 0x00004,20c02008
[  188.700012] Memory Limit: none
[  188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

[root@arch ~]# echo Helo
Helo
[root@arch ~]# cat /proc/cpuinfo | grep proce
processor : 0

Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions.

---
 arch/arm64/kernel/smp.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)
arch/arm64/kernel/smp.c +14 -3
@@ -769,11 +769,22 @@ void tick_broadcast(const struct cpumask
 }
 #endif
 
+/*
+ * The number of CPUs online, not counting this CPU (which may not be
+ * fully online and so not counted in num_online_cpus()).
+ */
+static inline unsigned int num_other_online_cpus(void)
+{
+	unsigned int this_cpu_online = cpu_online(smp_processor_id());
+
+	return num_online_cpus() - this_cpu_online;
+}
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
 
-	if (num_online_cpus() > 1) {
+	if (num_other_online_cpus()) {
 		cpumask_t mask;
 
 		cpumask_copy(&mask, cpu_online_mask);
@@ -784,10 +795,10 @@ void smp_send_stop(void)
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
-	while (num_online_cpus() > 1 && timeout--)
+	while (num_other_online_cpus() && timeout--)
 		udelay(1);
 
-	if (num_online_cpus() > 1)
+	if (num_other_online_cpus())
 		pr_warning("SMP: failed to stop secondary CPUs\n");
 }
 
author maintainer
#33 lore raw

PATCH 33/91 Revert "drm/dp_mst: Skip validating ports during destruction, just ref"

In reply to Greg Kroah-Hartman

From: Lyude Paul <[email protected]>

commit 9765635b30756eb74e05e260ac812659c296cd28 upstream.

This reverts commit:

c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")

ugh.

In drm_dp_destroy_connector_work(), we have a pretty good chance of freeing the actual struct drm_dp_mst_port. However, after destroying things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is where the problems start.

For i915, this calls all the way down to the fbcon probing helpers, which start trying to access the port in a modeset.

[   45.062001] ==================================================================
[   45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[   45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53
[   45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G           O      4.20.0-rc4Lyude-Test+ #3
[   45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[   45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[   45.062641] Call Trace:
[   45.062685]  dump_stack+0xbd/0x15a
[   45.062735]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[   45.062801]  ? printk+0x9f/0xc5
[   45.062847]  ? kmsg_dump_rewind_nolock+0xe4/0xe4
[   45.062909]  ? ex_handler_refcount+0x146/0x180
[   45.062970]  print_address_description+0x71/0x239
[   45.063036]  ? ex_handler_refcount+0x146/0x180
[   45.063095]  kasan_report.cold.5+0x242/0x30b
[   45.063155]  __asan_report_store4_noabort+0x1c/0x20
[   45.063313]  ex_handler_refcount+0x146/0x180
[   45.063371]  ? ex_handler_clear_fs+0xb0/0xb0
[   45.063428]  fixup_exception+0x98/0xd7
[   45.063484]  ? raw_notifier_call_chain+0x20/0x20
[   45.063548]  do_trap+0x6d/0x210
[   45.063605]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063732]  do_error_trap+0xc0/0x170
[   45.063802]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063929]  do_invalid_op+0x3b/0x50
[   45.063997]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064103]  invalid_op+0x14/0x20
[   45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[   45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[   45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[   45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[   45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[   45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[   45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[   45.065084]  drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[   45.065225]  intel_mst_disable_dp+0xda/0x180 [i915]
[   45.065361]  intel_encoders_disable.isra.107+0x197/0x310 [i915]
[   45.065498]  haswell_crtc_disable+0xbe/0x400 [i915]
[   45.065622]  ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[   45.065750]  intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[   45.065884]  ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[   45.065968]  ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[   45.066054]  ? kasan_check_write+0x14/0x20
[   45.066165]  ? i915_gem_track_fb+0x13a/0x330 [i915]
[   45.066277]  ? i915_sw_fence_complete+0xe9/0x140 [i915]
[   45.066406]  ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[   45.066540]  intel_atomic_commit+0x72e/0xef0 [i915]
[   45.066635]  ? drm_dev_dbg+0x200/0x200 [drm]
[   45.066764]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.066898]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.067001]  drm_atomic_commit+0xc4/0xf0 [drm]
[   45.067074]  restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[   45.067166]  ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[   45.067249]  ? kasan_check_read+0x11/0x20
[   45.067324]  restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[   45.067364]  ? kasan_check_read+0x11/0x20
[   45.067406]  drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[   45.067462]  ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[   45.067508]  ? kasan_check_write+0x14/0x20
[   45.070360]  ? mutex_unlock+0x22/0x40
[   45.073748]  drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[   45.075846]  drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[   45.078088]  drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[   45.082614]  intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[   45.087069]  drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[   45.089319]  intel_dp_mst_hotplug+0x37/0x50 [i915]
[   45.091496]  drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[   45.093675]  ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[   45.095851]  ? kasan_check_write+0x14/0x20
[   45.098473]  ? kasan_check_read+0x11/0x20
[   45.101155]  ? strscpy+0x17c/0x530
[   45.103808]  ? __switch_to_asm+0x34/0x70
[   45.106456]  ? syscall_return_via_sysret+0xf/0x7f
[   45.109711]  ? read_word_at_a_time+0x20/0x20
[   45.113138]  ? __switch_to_asm+0x40/0x70
[   45.116529]  ? __switch_to_asm+0x34/0x70
[   45.119891]  ? __switch_to_asm+0x40/0x70
[   45.123224]  ? __switch_to_asm+0x34/0x70
[   45.126540]  ? __switch_to_asm+0x34/0x70
[   45.129824]  process_one_work+0x88d/0x15d0
[   45.133172]  ? pool_mayday_timeout+0x850/0x850
[   45.136459]  ? pci_mmcfg_check_reserved+0x110/0x128
[   45.139739]  ? wake_q_add+0xb0/0xb0
[   45.143010]  ? check_preempt_wakeup+0x652/0x1050
[   45.146304]  ? worker_enter_idle+0x29e/0x740
[   45.149589]  ? __schedule+0x1ec0/0x1ec0
[   45.152937]  ? kasan_check_read+0x11/0x20
[   45.156179]  ? _raw_spin_lock_irq+0xa3/0x130
[   45.159382]  ? _raw_read_unlock_irqrestore+0x30/0x30
[   45.162542]  ? kasan_check_write+0x14/0x20
[   45.165657]  worker_thread+0x1a5/0x1470
[   45.168725]  ? set_load_weight+0x2e0/0x2e0
[   45.171755]  ? process_one_work+0x15d0/0x15d0
[   45.174806]  ? __switch_to_asm+0x34/0x70
[   45.177645]  ? __switch_to_asm+0x40/0x70
[   45.180323]  ? __switch_to_asm+0x34/0x70
[   45.182936]  ? __switch_to_asm+0x40/0x70
[   45.185539]  ? __switch_to_asm+0x34/0x70
[   45.188100]  ? __switch_to_asm+0x40/0x70
[   45.190628]  ? __schedule+0x7d4/0x1ec0
[   45.193143]  ? save_stack+0xa9/0xd0
[   45.195632]  ? kasan_check_write+0x10/0x20
[   45.198162]  ? kasan_kmalloc+0xc4/0xe0
[   45.200609]  ? kmem_cache_alloc_trace+0xdd/0x190
[   45.203046]  ? kthread+0x9f/0x3b0
[   45.205470]  ? ret_from_fork+0x35/0x40
[   45.207876]  ? unwind_next_frame+0x43/0x50
[   45.210273]  ? __save_stack_trace+0x82/0x100
[   45.212658]  ? deactivate_slab.isra.67+0x3d4/0x580
[   45.215026]  ? default_wake_function+0x35/0x50
[   45.217399]  ? kasan_check_read+0x11/0x20
[   45.219825]  ? _raw_spin_lock_irqsave+0xae/0x140
[   45.222174]  ? __lock_text_start+0x8/0x8
[   45.224521]  ? replenish_dl_entity.cold.62+0x4f/0x4f
[   45.226868]  ? __kthread_parkme+0x87/0xf0
[   45.229200]  kthread+0x2f7/0x3b0
[   45.231557]  ? process_one_work+0x15d0/0x15d0
[   45.233923]  ? kthread_park+0x120/0x120
[   45.236249]  ret_from_fork+0x35/0x40
[   45.240875] Allocated by task 242:
[   45.243136]  save_stack+0x43/0xd0
[   45.245385]  kasan_kmalloc+0xc4/0xe0
[   45.247597]  kmem_cache_alloc_trace+0xdd/0x190
[   45.249793]  drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[   45.252000]  drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[   45.254389]  drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[   45.256803]  drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[   45.259200]  process_one_work+0x88d/0x15d0
[   45.261597]  worker_thread+0x1a5/0x1470
[   45.264038]  kthread+0x2f7/0x3b0
[   45.266371]  ret_from_fork+0x35/0x40
[   45.270937] Freed by task 53:
[   45.273170]  save_stack+0x43/0xd0
[   45.275382]  __kasan_slab_free+0x139/0x190
[   45.277604]  kasan_slab_free+0xe/0x10
[   45.279826]  kfree+0x99/0x1b0
[   45.282044]  drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[   45.284330]  drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[   45.286660]  process_one_work+0x88d/0x15d0
[   45.288934]  worker_thread+0x1a5/0x1470
[   45.291231]  kthread+0x2f7/0x3b0
[   45.293547]  ret_from_fork+0x35/0x40
[   45.298206] The buggy address belongs to the object at ffff8882b4b70968
                which belongs to the cache kmalloc-2k of size 2048
[   45.303047] The buggy address is located 0 bytes inside of
                2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[   45.308010] The buggy address belongs to the page:
[   45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[   45.313051] flags: 0x8000000000010200(slab|head)
[   45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[   45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[   45.320966] page dumped because: kasan: bad access detected
[   45.326312] Memory state around the buggy address:
[   45.329085]  ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.331845]  ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[   45.337302]                                                           ^
[   45.340061]  ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.342910]  ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.345748] ==================================================================

So, this definitely isn't a fix that we want. This being said; there's no real easy fix for this problem because of some of the catch-22's of the MST helpers current design. For starters; we always need to validate a port with drm_dp_get_validated_port_ref(), but validation relies on the lifetime of the port in the actual topology. So once the port is gone, it can't be validated again.

If we were to try to make the payload helpers not use port validation, then we'd cause another problem: if the port isn't validated, it could be freed and we'd just start causing more KASAN issues. There are already hacks that attempt to workaround this in drm_dp_mst_destroy_connector_work() by re-initializing the kref so that it can be used again and it's memory can be freed once the VCPI helpers finish removing the port's respective payloads. But none of these really do anything helpful since the port still can't be validated since it's gone from the topology. Also, that workaround is immensely confusing to read through.

What really needs to be done in order to fix this is to teach DRM how to track the lifetime of the structs for MST ports and branch devices separately from their lifetime in the actual topology. Simply put; this means having two different krefs-one that removes the port/branch device from the topology, and one that finally calls kfree(). This would let us simplify things, since we'd now be able to keep ports around without having to keep them in the topology at the same time, which is exactly what we need in order to teach our VCPI helpers to only validate ports when it's actually necessary without running the risk of trying to use unallocated memory.

Such a fix is on it's way, but for now let's play it safe and just revert this. If this bug has been around for well over a year, we can wait a little while to get an actual proper fix here.

Fixes c54c7374ff44 ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc Daniel Vetter <[email protected]>
Cc Sean Paul <[email protected]>
Cc Jerry Zuo <[email protected]>
Cc Harry Wentland <[email protected]>
Cc Guenter Roeck <[email protected]>
---
 drivers/gpu/drm/drm_dp_mst_topology.c |   15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +2 -13
@@ -975,20 +975,9 @@ static struct drm_dp_mst_port *drm_dp_ms
 static struct drm_dp_mst_port *drm_dp_get_validated_port_ref(struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
 {
 	struct drm_dp_mst_port *rport = NULL;
-
 	mutex_lock(&mgr->lock);
-	/*
-	 * Port may or may not be 'valid' but we don't care about that when
-	 * destroying the port and we are guaranteed that the port pointer
-	 * will be valid until we've finished
-	 */
-	if (current_work() == &mgr->destroy_connector_work) {
-		kref_get(&port->kref);
-		rport = port;
-	} else if (mgr->mst_primary) {
-		rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary,
-						       port);
-	}
+	if (mgr->mst_primary)
+		rport = drm_dp_mst_get_port_ref_locked(mgr->mst_primary, port);
 	mutex_unlock(&mgr->lock);
 	return rport;
 }
author maintainer
#34 lore raw

PATCH 34/91 hsr: fix general protection fault in hsr_addr_is_self()

In reply to Greg Kroah-Hartman

From: Taehee Yoo <[email protected]>

[ Upstream commit 3a303cfdd28d5f930a307c82e8a9d996394d5ebd ]

The port->hsr is used in the hsr_handle_frame(), which is a callback of rx_handler.
hsr master and slaves are initialized in hsr_add_port().
This function initializes several pointers, which includes port->hsr after registering rx_handler.
So, in the rx_handler routine, un-initialized pointer would be used. In order to fix this, pointers should be initialized before registering rx_handler.

Test commands:
ip netns del left
ip netns del right
modprobe -rv veth
modprobe -rv hsr
killall ping
modprobe hsr
ip netns add left
ip netns add right
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link add veth4 type veth peer name veth5
ip link set veth1 netns left
ip link set veth3 netns right
ip link set veth4 netns left
ip link set veth5 netns right
ip link set veth0 up
ip link set veth2 up
ip link set veth0 address fc:00:00:00:00:01
ip link set veth2 address fc:00:00:00:00:02
ip netns exec left ip link set veth1 up
ip netns exec left ip link set veth4 up
ip netns exec right ip link set veth3 up
ip netns exec right ip link set veth5 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4 ip netns exec left ip a a 192.168.100.2/24 dev hsr1
ip netns exec left ip link set hsr1 up
ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
for i in {1..100}
do
ip netns exec left ping 192.168.100.1 &
done
ip netns exec left hping3 192.168.100.1 -2 --flood &
ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5 ip netns exec right ip a a 192.168.100.3/24 dev hsr2
ip netns exec right ip link set hsr2 up
ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
for i in {1..100}
do
ip netns exec right ping 192.168.100.1 &
done
ip netns exec right hping3 192.168.100.1 -2 --flood &
while :
do
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip link del hsr0
done

Splat looks like:

[  120.954938][    C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I
[  120.957761][    C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[  120.959064][    C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460
[  120.960054][    C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  120.962261][    C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr]
[  120.963149][    C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4
[  120.966277][    C0] RSP: 0018:ffff8880d9c09af0 EFLAGS: 00010206
[  120.967293][    C0] RAX: 0000000000000006 RBX: 1ffff1101b38135f RCX: 0000000000000000
[  120.968516][    C0] RDX: dffffc0000000000 RSI: ffff8880d17cb208 RDI: 0000000000000000
[  120.969718][    C0] RBP: 0000000000000030 R08: ffffed101b3c0e3c R09: 0000000000000001
[  120.972203][    C0] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 0000000000000000
[  120.973379][    C0] R13: ffff8880aaf80100 R14: ffff8880aaf800f2 R15: ffff8880aaf80040
[  120.974410][    C0] FS:  00007f58e693f740(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000
[  120.979794][    C0] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  120.980773][    C0] CR2: 00007ffcb8b38f29 CR3: 00000000afe8e001 CR4: 00000000000606f0
[  120.981945][    C0] Call Trace:
[  120.982411][    C0]  <IRQ>
[  120.982848][    C0]  ? hsr_add_node+0x8c0/0x8c0 [hsr]
[  120.983522][    C0]  ? rcu_read_lock_held+0x90/0xa0
[  120.984159][    C0]  ? rcu_read_lock_sched_held+0xc0/0xc0
[  120.984944][    C0]  hsr_handle_frame+0x1db/0x4e0 [hsr]
[  120.985597][    C0]  ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr]
[  120.986289][    C0]  __netif_receive_skb_core+0x6bf/0x3170
[  120.992513][    C0]  ? check_chain_key+0x236/0x5d0
[  120.993223][    C0]  ? do_xdp_generic+0x1460/0x1460
[  120.993875][    C0]  ? register_lock_class+0x14d0/0x14d0
[  120.994609][    C0]  ? __netif_receive_skb_one_core+0x8d/0x160
[  120.995377][    C0]  __netif_receive_skb_one_core+0x8d/0x160
[  120.996204][    C0]  ? __netif_receive_skb_core+0x3170/0x3170

[ ... ]

Reported-by [email protected]
Fixes c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
---
 net/hsr/hsr_slave.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/hsr/hsr_slave.c +4 -4
@@ -149,16 +149,16 @@ int hsr_add_port(struct hsr_priv *hsr, s
 	if (port == NULL)
 		return -ENOMEM;
 
+	port->hsr = hsr;
+	port->dev = dev;
+	port->type = type;
+
 	if (type != HSR_PT_MASTER) {
 		res = hsr_portdev_setup(dev, port);
 		if (res)
 			goto fail_dev_setup;
 	}
 
-	port->hsr = hsr;
-	port->dev = dev;
-	port->type = type;
-
 	list_add_tail_rcu(&port->port_list, &hsr->ports);
 	synchronize_rcu();
 
author maintainer
#35 lore raw

PATCH 35/91 net: dsa: Fix duplicate frames flooded by learning

In reply to Greg Kroah-Hartman

From: Florian Fainelli <[email protected]>

[ Upstream commit 0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]

When both the switch and the bridge are learning about new addresses, switch ports attached to the bridge would see duplicate ARP frames because both entities would attempt to send them.

Fixes 5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
---
 net/dsa/tag_brcm.c |    2 ++
 1 file changed, 2 insertions(+)
net/dsa/tag_brcm.c +2 -0
@@ -84,6 +84,8 @@ static struct sk_buff *brcm_tag_xmit(str
 		brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
 	brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
 
+	skb->offload_fwd_mark = 1;
+
 	return skb;
 
 out_free:
author maintainer
#36 lore raw

PATCH 36/91 net_sched: cls_route: remove the right filter from hashtable

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit ef299cc3fa1a9e1288665a9fdc8bff55629fd359 ]

route4_change() allocates a new filter and copies values from the old one. After the new filter is inserted into the hash table, the old filter should be removed and freed, as the final step of the update.

However, the current code mistakenly removes the new one. This looks apparently wrong to me, and it causes double "free" and use-after-free too, as reported by syzbot.

Reported-and-tested-by [email protected]
Reported-and-tested-by [email protected]
Reported-and-tested-by [email protected]
Fixes 1109c00547fc ("net: sched: RCU cls_route")
Cc Jamal Hadi Salim <[email protected]>
Cc Jiri Pirko <[email protected]>
Cc John Fastabend <[email protected]>
---
 net/sched/cls_route.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/sched/cls_route.c +2 -2
@@ -540,8 +540,8 @@ static int route4_change(struct net *net
 			fp = &b->ht[h];
 			for (pfp = rtnl_dereference(*fp); pfp;
 			     fp = &pfp->next, pfp = rtnl_dereference(*fp)) {
-				if (pfp == f) {
-					*fp = f->next;
+				if (pfp == fold) {
+					rcu_assign_pointer(*fp, fold->next);
 					break;
 				}
 			}
author maintainer
#19 lore raw

PATCH 19/91 staging/speakup: fix get_word non-space look-ahead

In reply to Greg Kroah-Hartman

From: Samuel Thibault <[email protected]>

commit 9d32c0cde4e2d1343dfb88a67b2ec6397705b32b upstream.

get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled.

Reported-on: https://github.com/bytefire/speakup/issues/1

---
 drivers/staging/speakup/main.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/staging/speakup/main.c +1 -2
@@ -562,8 +562,7 @@ static u_long get_word(struct vc_data *v
 		return 0;
 	} else if ((tmpx < vc->vc_cols - 2)
 		   && (ch == SPACE || ch == 0 || IS_WDLM(ch))
-		   && ((char)get_char(vc, (u_short *) &tmp_pos + 1, &temp) >
-		       SPACE)) {
+		   && ((char)get_char(vc, (u_short *)tmp_pos + 1, &temp) > SPACE)) {
 		tmp_pos += 2;
 		tmpx++;
 	} else
author maintainer
#38 lore raw

PATCH 38/91 NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()

In reply to Greg Kroah-Hartman

From: Dan Carpenter <[email protected]>

[ Upstream commit 0dcdf9f64028ec3b75db6b691560f8286f3898bf ]

The nci_conn_max_data_pkt_payload_size() function sometimes returns -EPROTO so "max_size" needs to be signed for the error handling to work. We can make "payload_size" an int as well.

Fixes a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver")
---
 drivers/nfc/fdp/fdp.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/nfc/fdp/fdp.c +2 -3
@@ -191,7 +191,7 @@ static int fdp_nci_send_patch(struct nci
 	const struct firmware *fw;
 	struct sk_buff *skb;
 	unsigned long len;
-	u8 max_size, payload_size;
+	int max_size, payload_size;
 	int rc = 0;
 
 	if ((type == NCI_PATCH_TYPE_OTP && !info->otp_patch) ||
@@ -214,8 +214,7 @@ static int fdp_nci_send_patch(struct nci
 
 	while (len) {
 
-		payload_size = min_t(unsigned long, (unsigned long) max_size,
-				     len);
+		payload_size = min_t(unsigned long, max_size, len);
 
 		skb = nci_skb_alloc(ndev, (NCI_CTRL_HDR_SIZE + payload_size),
 				    GFP_KERNEL);
author maintainer
#37 lore raw

PATCH 37/91 net_sched: keep alloc_hash updated after hash allocation

In reply to Greg Kroah-Hartman

From: Cong Wang <[email protected]>

[ Upstream commit 0d1c3530e1bd38382edef72591b78e877e0edcd3 ]

In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access.

cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash().

Reported-and-tested-by [email protected]
Reported-and-tested-by [email protected]
Fixes 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex")
Cc Jamal Hadi Salim <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/cls_tcindex.c |    1 +
 1 file changed, 1 insertion(+)
net/sched/cls_tcindex.c +1 -0
@@ -293,6 +293,7 @@ tcindex_set_parms(struct net *net, struc
 				      sizeof(*r) * cp->hash, GFP_KERNEL);
 		if (!cp->perfect)
 			goto errout;
+		cp->alloc_hash = cp->hash;
 		for (i = 0; i < min(cp->hash, p->hash); i++)
 			tcf_exts_init(&cp->perfect[i].exts,
 				      TCA_TCINDEX_ACT, TCA_TCINDEX_POLICE);
author maintainer
#39 lore raw

PATCH 39/91 slcan: not call free_netdev before rtnl_unlock in slcan_open

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

[ Upstream commit 2091a3d42b4f339eaeed11228e0cbe9d4f92f558 ]

As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code.

This patch is a 1:1 copy of upstream slip.c commit f596c87005f7 ("slip: not call free_netdev before rtnl_unlock in slip_open").

---
 drivers/net/can/slcan.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/net/can/slcan.c +3 -0
@@ -621,7 +621,10 @@ err_free_chan:
 	tty->disc_data = NULL;
 	clear_bit(SLF_INUSE, &sl->flags);
 	slc_free_netdev(sl->dev);
+	/* do not call free_netdev before rtnl_unlock */
+	rtnl_unlock();
 	free_netdev(sl->dev);
+	return err;
 
 err_exit:
 	rtnl_unlock();
author maintainer
#42 lore raw

PATCH 42/91 hsr: add restart routine into hsr_get_node_list()

In reply to Greg Kroah-Hartman

From: Taehee Yoo <[email protected]>

[ Upstream commit ca19c70f5225771c05bcdcb832b4eb84d7271c5e ]

The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added.

Fixes f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
---
 net/hsr/hsr_netlink.c |   38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)
net/hsr/hsr_netlink.c +24 -14
@@ -366,16 +366,14 @@ fail:
  */
 static int hsr_get_node_list(struct sk_buff *skb_in, struct genl_info *info)
 {
-	/* For receiving */
-	struct nlattr *na;
+	unsigned char addr[ETH_ALEN];
 	struct net_device *hsr_dev;
-
-	/* For sending */
 	struct sk_buff *skb_out;
-	void *msg_head;
 	struct hsr_priv *hsr;
-	void *pos;
-	unsigned char addr[ETH_ALEN];
+	bool restart = false;
+	struct nlattr *na;
+	void *pos = NULL;
+	void *msg_head;
 	int res;
 
 	if (!info)
@@ -393,8 +391,9 @@ static int hsr_get_node_list(struct sk_b
 	if (!is_hsr_master(hsr_dev))
 		goto rcu_unlock;
 
+restart:
 	/* Send reply */
-	skb_out = genlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
+	skb_out = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_ATOMIC);
 	if (!skb_out) {
 		res = -ENOMEM;
 		goto fail;
@@ -408,17 +407,28 @@ static int hsr_get_node_list(struct sk_b
 		goto nla_put_failure;
 	}
 
-	res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
-	if (res < 0)
-		goto nla_put_failure;
+	if (!restart) {
+		res = nla_put_u32(skb_out, HSR_A_IFINDEX, hsr_dev->ifindex);
+		if (res < 0)
+			goto nla_put_failure;
+	}
 
 	hsr = netdev_priv(hsr_dev);
 
-	pos = hsr_get_next_node(hsr, NULL, addr);
+	if (!pos)
+		pos = hsr_get_next_node(hsr, NULL, addr);
 	while (pos) {
 		res = nla_put(skb_out, HSR_A_NODE_ADDR, ETH_ALEN, addr);
-		if (res < 0)
+		if (res < 0) {
+			if (res == -EMSGSIZE) {
+				genlmsg_end(skb_out, msg_head);
+				genlmsg_unicast(genl_info_net(info), skb_out,
+						info->snd_portid);
+				restart = true;
+				goto restart;
+			}
 			goto nla_put_failure;
+		}
 		pos = hsr_get_next_node(hsr, pos, addr);
 	}
 	rcu_read_unlock();
@@ -435,7 +445,7 @@ invalid:
 	return 0;
 
 nla_put_failure:
-	kfree_skb(skb_out);
+	nlmsg_free(skb_out);
 	/* Fall through */
 
 fail:
author maintainer
#41 lore raw

PATCH 41/91 hsr: use rcu_read_lock() in hsr_get_node_{list/status}()

In reply to Greg Kroah-Hartman

From: Taehee Yoo <[email protected]>

[ Upstream commit 173756b86803655d70af7732079b3aa935e6ab68 ]

hsr_get_node_{list/status}() are not under rtnl_lock() because they are callback functions of generic netlink.
But they use __dev_get_by_index() without rtnl_lock(). So, it would use unsafe data.
In order to fix it, rcu_read_lock() and dev_get_by_index_rcu() are used instead of __dev_get_by_index().

Fixes f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
---
 net/hsr/hsr_framereg.c |   10 ++--------
 net/hsr/hsr_netlink.c  |   43 +++++++++++++++++++++----------------------
 2 files changed, 23 insertions(+), 30 deletions(-)
net/hsr/hsr_framereg.c +2 -8
@@ -455,13 +455,9 @@ int hsr_get_node_data(struct hsr_priv *h
 	struct hsr_port *port;
 	unsigned long tdiff;
 
-
-	rcu_read_lock();
 	node = find_node_by_AddrA(&hsr->node_db, addr);
-	if (!node) {
-		rcu_read_unlock();
-		return -ENOENT;	/* No such entry */
-	}
+	if (!node)
+		return -ENOENT;
 
 	ether_addr_copy(addr_b, node->MacAddressB);
 
@@ -496,7 +492,5 @@ int hsr_get_node_data(struct hsr_priv *h
 		*addr_b_ifindex = -1;
 	}
 
-	rcu_read_unlock();
-
 	return 0;
 }
net/hsr/hsr_netlink.c +21 -22

119 lines not on this page · raw message

author maintainer
#45 lore raw

PATCH 45/91 IB/ipoib: Do not warn if IPoIB debugfs doesnt exist

In reply to Greg Kroah-Hartman

From: Alaa Hleihel <[email protected]>

[ Upstream commit 14fa91e0fef8e4d6feb8b1fa2a807828e0abe815 ]

netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event multiple times until all refs are gone, which will result in calling ipoib_delete_debug_files multiple times and printing a warning.

Remove the WARN_ONCE since checks of NULL pointers before calling debugfs_remove are not needed.

Fixes 771a52584096 ("IB/IPoIB: ibX: failed to create mcg debug file")
---
 drivers/infiniband/ulp/ipoib/ipoib_fs.c | 2 --
 1 file changed, 2 deletions(-)
drivers/infiniband/ulp/ipoib/ipoib_fs.c +0 -2
index 09396bd7b02d2..63be3bcdc0e38 100644
@@ -281,8 +281,6 @@ void ipoib_delete_debug_files(struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 
-	WARN_ONCE(!priv->mcg_dentry, "null mcg debug file\n");
-	WARN_ONCE(!priv->path_dentry, "null path debug file\n");
 	debugfs_remove(priv->mcg_dentry);
 	debugfs_remove(priv->path_dentry);
 	priv->mcg_dentry = priv->path_dentry = NULL;
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/91 vhost: Check docket sk_family instead of call getname

In reply to Greg Kroah-Hartman

From: Eugenio Pérez <[email protected]>

[ Upstream commit 42d84c8490f9f0931786f1623191fcab397c3d64 ]

Doing so, we save one call to get data we already have in the struct.

Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro).

Fixes 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Reported-by [email protected]
---
 drivers/vhost/net.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)
drivers/vhost/net.c +2 -11
index 1459dc9fd7010..5efac33c29dcb 100644
@@ -815,11 +815,7 @@ static int vhost_net_release(struct inode *inode, struct file *f)
 
 static struct socket *get_raw_socket(int fd)
 {
-	struct {
-		struct sockaddr_ll sa;
-		char  buf[MAX_ADDR_LEN];
-	} uaddr;
-	int uaddr_len = sizeof uaddr, r;
+	int r;
 	struct socket *sock = sockfd_lookup(fd, &r);
 
 	if (!sock)
@@ -831,12 +827,7 @@ static struct socket *get_raw_socket(int fd)
 		goto err;
 	}
 
-	r = sock->ops->getname(sock, (struct sockaddr *)&uaddr.sa,
-			       &uaddr_len, 0);
-	if (r)
-		goto err;
-
-	if (uaddr.sa.sll_family != AF_PACKET) {
+	if (sock->sk->sk_family != AF_PACKET) {
 		r = -EPFNOSUPPORT;
 		goto err;
 	}
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/91 intel_th: Fix user-visible error codes

In reply to Greg Kroah-Hartman

From: Alexander Shishkin <[email protected]>

commit ce666be89a8a09c5924ff08fc32e119f974bdab6 upstream.

There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL.

---
 drivers/hwtracing/intel_th/msu.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/hwtracing/intel_th/msu.c +3 -3
@@ -483,7 +483,7 @@ static int msc_configure(struct msc *msc
 	u32 reg;
 
 	if (msc->mode > MSC_MODE_MULTI)
-		return -ENOTSUPP;
+		return -EINVAL;
 
 	if (msc->mode == MSC_MODE_MULTI)
 		msc_buffer_clear_hw_header(msc);
@@ -935,7 +935,7 @@ static int msc_buffer_alloc(struct msc *
 	} else if (msc->mode == MSC_MODE_MULTI) {
 		ret = msc_buffer_multi_alloc(msc, nr_pages, nr_wins);
 	} else {
-		ret = -ENOTSUPP;
+		ret = -EINVAL;
 	}
 
 	if (!ret) {
@@ -1164,7 +1164,7 @@ static ssize_t intel_th_msc_read(struct
 		if (ret >= 0)
 			*ppos = iter->offset;
 	} else {
-		ret = -ENOTSUPP;
+		ret = -EINVAL;
 	}
 
 put_count:
author maintainer
#48 lore raw

PATCH 48/91 drivers/hwspinlock: use correct radix tree API

In reply to Greg Kroah-Hartman

From: Matthew Wilcox <[email protected]>

[ Upstream commit b76ba4af4ddd6a06f7f65769e7be1bc56556cdf5 ]

radix_tree_is_indirect_ptr() is an internal API. The correct call to use is radix_tree_deref_retry() which has the appropriate unlikely() annotation.

Fixes c6400ba7e13a ("drivers/hwspinlock: fix race between radix tree insertion and lookup")
Cc Konstantin Khlebnikov <[email protected]>
Cc Kirill Shutemov <[email protected]>
Cc Jan Kara <[email protected]>
Cc Neil Brown <[email protected]>
Cc Ross Zwisler <[email protected]>
---
 drivers/hwspinlock/hwspinlock_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwspinlock/hwspinlock_core.c +1 -1
index d50c701b19d67..4074441444fed 100644
@@ -313,7 +313,7 @@ int of_hwspin_lock_get_id(struct device_node *np, int index)
 		hwlock = radix_tree_deref_slot(slot);
 		if (unlikely(!hwlock))
 			continue;
-		if (radix_tree_is_indirect_ptr(hwlock)) {
+		if (radix_tree_deref_retry(hwlock)) {
 			slot = radix_tree_iter_retry(&iter);
 			continue;
 		}
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/91 net: ipv4: dont let PMTU updates increase route MTU

In reply to Greg Kroah-Hartman

From: Sabrina Dubroca <[email protected]>

[ Upstream commit 28d35bcdd3925e7293408cdb8aa5f2aac5f0d6e3 ]

When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU.

To fix this, take the smallest of the old MTU and ip_rt_min_pmtu.

Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test.

Fixes d52e5a7e7ca4 ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu")
---
 net/ipv4/route.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
net/ipv4/route.c +4 -3
index 42132ac2c497e..988c132319c48 100644
@@ -985,21 +985,22 @@ out:	kfree_skb(skb);
 static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
 {
 	struct dst_entry *dst = &rt->dst;
+	u32 old_mtu = ipv4_mtu(dst);
 	struct fib_result res;
 	bool lock = false;
 
 	if (ip_mtu_locked(dst))
 		return;
 
-	if (ipv4_mtu(dst) < mtu)
+	if (old_mtu < mtu)
 		return;
 
 	if (mtu < ip_rt_min_pmtu) {
 		lock = true;
-		mtu = ip_rt_min_pmtu;
+		mtu = min(old_mtu, ip_rt_min_pmtu);
 	}
 
-	if (rt->rt_pmtu == mtu &&
+	if (rt->rt_pmtu == mtu && !lock &&
 	    time_before(jiffies, dst->expires - ip_rt_mtu_expires / 2))
 		return;
 
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/91 cpupower: avoid multiple definition with gcc -fno-common

In reply to Greg Kroah-Hartman

From: Mike Gilbert <[email protected]>

[ Upstream commit 2de7fb60a4740135e03cf55c1982e393ccb87b6b ]

Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables.

./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here

The -fno-common option will be enabled by default in GCC 10.

---
 tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c  | 2 +-
 tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c    | 2 +-
 tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c | 2 ++
 tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h | 2 +-
 4 files changed, 5 insertions(+), 3 deletions(-)
tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c +1 -1
index 2116df9ad8325..c097a3748674f 100644
@@ -83,7 +83,7 @@ static struct pci_access *pci_acc;
 static struct pci_dev *amd_fam14h_pci_dev;
 static int nbp1_entered;
 
-struct timespec start_time;
+static struct timespec start_time;
 static unsigned long long timediff;
 
 #ifdef DEBUG
tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c +1 -1
index bcd22a1a39708..86e9647e4e686 100644
@@ -21,7 +21,7 @@ struct cpuidle_monitor cpuidle_sysfs_monitor;
 
 static unsigned long long **previous_count;
 static unsigned long long **current_count;
-struct timespec start_time;
+static struct timespec start_time;
 static unsigned long long timediff;
 
 static int cpuidle_get_count_percent(unsigned int id, double *percent,
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c +2 -0
index 05f953f0f0a0c..80a21cb67d94f 100644
@@ -29,6 +29,8 @@ struct cpuidle_monitor *all_monitors[] = {
 0
 };
 
+int cpu_count;
+
 static struct cpuidle_monitor *monitors[MONITORS_MAX];
 static unsigned int avail_monitors;
 
tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h +1 -1
index 9e43f3371fbc6..3558bbae2b5dc 100644
@@ -18,7 +18,7 @@
 #define CSTATE_NAME_LEN 5
 #define CSTATE_DESC_LEN 60
 
-int cpu_count;
+extern int cpu_count;
 
 /* Hard to define the right names ...: */
 enum power_range_e {
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/91 dt-bindings: net: FMan erratum A050385

In reply to Greg Kroah-Hartman

From: Madalin Bucur <[email protected]>

[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ]

FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing.

The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions:

1. FMAN AXI transaction crosses 4K address boundary (Errata

     A010022)

2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero
3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc.

With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic.

To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules:

1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned
2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned
3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size.

Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are two options:
1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary,
2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above.

---
 Documentation/devicetree/bindings/powerpc/fsl/fman.txt | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/powerpc/fsl/fman.txt +7 -0
index 1fc5328c0651b..23708f3f4e58a 100644
@@ -110,6 +110,13 @@ PROPERTIES
 		Usage: required
 		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
 
+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
 =============================================================================
 FMan MURAM Node
 
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/91 scsi: ipr: Fix softlockup when rescanning devices in petitboot

In reply to Greg Kroah-Hartman

From: Wen Xiong <[email protected]>

[ Upstream commit 394b61711f3ce33f75bf70a3e22938464a13b3ee ]

When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace:

Kernel panic - not syncing: System is deadlocked on memory
[  241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1
[  241.223406] Call Trace:
[  241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable)
[  241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc
[  241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4
[  241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8
[  241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4
[  241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8
[  241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98
[  241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c
[  241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404
[  241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48
[  241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4
[  241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270
[  241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78
[  241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70
[  241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264
[  241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c
[  241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478
[  241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c
[  241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158
[  241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114
[  241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c
[  241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78
[  241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8
[  241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60
[  241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc
[  241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc
[  241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68

As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4.

The patch fixes softlockup issue.

Thanks for Oliver Halloran's help with debugging and explanation!

---
 drivers/scsi/ipr.c | 3 ++-
 drivers/scsi/ipr.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/ipr.c +2 -1
index 2f61d8cd58828..c321d73f602d7 100644
@@ -9730,6 +9730,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 	ioa_cfg->max_devs_supported = ipr_max_devs;
 
 	if (ioa_cfg->sis64) {
+		host->max_channel = IPR_MAX_SIS64_BUSES;
 		host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS;
 		host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET;
 		if (ipr_max_devs > IPR_MAX_SIS64_DEVS)
@@ -9738,6 +9739,7 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 					   + ((sizeof(struct ipr_config_table_entry64)
 					       * ioa_cfg->max_devs_supported)));
 	} else {
+		host->max_channel = IPR_VSET_BUS;
 		host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS;
 		host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET;
 		if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS)
@@ -9747,7 +9749,6 @@ static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 					       * ioa_cfg->max_devs_supported)));
 	}
 
-	host->max_channel = IPR_VSET_BUS;
 	host->unique_id = host->host_no;
 	host->max_cmd_len = IPR_MAX_CDB_LEN;
 	host->can_queue = ioa_cfg->max_cmds;
drivers/scsi/ipr.h +1 -0
index a34c7a5a995e4..9c82ea000c117 100644
@@ -1301,6 +1301,7 @@ struct ipr_resource_entry {
 #define IPR_ARRAY_VIRTUAL_BUS			0x1
 #define IPR_VSET_VIRTUAL_BUS			0x2
 #define IPR_IOAFP_VIRTUAL_BUS			0x3
+#define IPR_MAX_SIS64_BUSES			0x4
 
 #define IPR_GET_RES_PHYS_LOC(res) \
 	(((res)->bus << 24) | ((res)->target << 8) | (res)->lun)
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/91 mac80211: Do not send mesh HWMP PREQ if HWMP is disabled

In reply to Greg Kroah-Hartman

From: Nicolas Cavallari <[email protected]>

[ Upstream commit ba32679cac50c38fdf488296f96b1f3175532b8e ]

When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm.

---
 net/mac80211/mesh_hwmp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/mac80211/mesh_hwmp.c +2 -1
index 466922f09d048..43edcba6d67b7 100644
@@ -1112,7 +1112,8 @@ int mesh_nexthop_resolve(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
-	if (!(mpath->flags & MESH_PATH_RESOLVING))
+	if (!(mpath->flags & MESH_PATH_RESOLVING) &&
+	    mesh_path_sel_is_hwmp(sdata))
 		mesh_queue_preq(mpath, PREQ_Q_F_START);
 
 	if (skb_queue_len(&mpath->frame_queue) >= MESH_FRAME_QUEUE_LEN)
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/91 i2c: hix5hd2: add missed clk_disable_unprepare in remove

In reply to Greg Kroah-Hartman

From: Chuhong Yuan <[email protected]>

commit e1b9f99ff8c40bba6e59de9ad4a659447b1e4112 upstream.

The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it.

---
 drivers/i2c/busses/i2c-hix5hd2.c |    1 +
 1 file changed, 1 insertion(+)
drivers/i2c/busses/i2c-hix5hd2.c +1 -0
@@ -500,6 +500,7 @@ static int hix5hd2_i2c_remove(struct pla
 	i2c_del_adapter(&priv->adap);
 	pm_runtime_disable(priv->dev);
 	pm_runtime_set_suspended(priv->dev);
+	clk_disable_unprepare(priv->clk);
 
 	return 0;
 }
author maintainer
#56 lore raw

PATCH 56/91 perf probe: Do not depend on dwfl_module_addrsym()

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

commit 1efde2754275dbd9d11c6e0132a4f09facf297ab upstream.

Do not depend on dwfl_module_addrsym() because it can fail on user-space shared libraries.

Actually, same bug was fixed by commit 664fee3dc379 ("perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit 07d369857808 ("perf probe: Fix wrong address verification) reverted to get actual symbol address from symtab.

This fixes it again by getting symbol address from DIE, and only if the DIE has only address range, it uses dwfl_module_addrsym().

---
 tools/perf/util/probe-finder.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
tools/perf/util/probe-finder.c +8 -3
@@ -608,14 +608,19 @@ static int convert_to_trace_point(Dwarf_
 		return -EINVAL;
 	}
 
-	/* Try to get actual symbol name from symtab */
-	symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL);
+	if (dwarf_entrypc(sp_die, &eaddr) == 0) {
+		/* If the DIE has entrypc, use it. */
+		symbol = dwarf_diename(sp_die);
+	} else {
+		/* Try to get actual symbol name and address from symtab */
+		symbol = dwfl_module_addrsym(mod, paddr, &sym, NULL);
+		eaddr = sym.st_value;
+	}
 	if (!symbol) {
 		pr_warning("Failed to find symbol at 0x%lx\n",
 			   (unsigned long)paddr);
 		return -ENOENT;
 	}
-	eaddr = sym.st_value;
 
 	tp->offset = (unsigned long)(paddr - eaddr);
 	tp->address = (unsigned long)paddr;
author maintainer
#21 lore raw

PATCH 21/91 rtc: max8907: add missing select REGMAP_IRQ

In reply to Greg Kroah-Hartman

From: Corentin Labbe <[email protected]>

commit 5d892919fdd0cefd361697472d4e1b174a594991 upstream.

I have hit the following build error:

armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc stable <[email protected]>
---
 drivers/rtc/Kconfig |    1 +
 1 file changed, 1 insertion(+)
drivers/rtc/Kconfig +1 -0
@@ -278,6 +278,7 @@ config RTC_DRV_MAX6900
 config RTC_DRV_MAX8907
 	tristate "Maxim MAX8907"
 	depends on MFD_MAX8907
+	select REGMAP_IRQ
 	help
 	  If you say yes here you will get support for the
 	  RTC of Maxim MAX8907 PMIC.
author maintainer
#58 lore raw

PATCH 58/91 scsi: sd: Fix optimal I/O size for devices that change reported values

In reply to Greg Kroah-Hartman

From: Martin K. Petersen <[email protected]>

commit ea697a8bf5a4161e59806fab14f6e4a46dc7dcb0 upstream.

Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported.

Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed.

Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts.

---
 drivers/scsi/sd.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/sd.c +3 -1
@@ -2915,9 +2915,11 @@ static int sd_revalidate_disk(struct gen
 	    logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_CACHE_SIZE) {
 		q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
 		rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
-	} else
+	} else {
+		q->limits.io_opt = 0;
 		rw_max = min_not_zero(logical_to_sectors(sdp, dev_max),
 				      (sector_t)BLK_DEF_MAX_SECTORS);
+	}
 
 	/* Do not exceed controller limit */
 	rw_max = min(rw_max, queue_max_hw_sectors(q));
author maintainer
#22 lore raw

PATCH 22/91 memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event

In reply to Greg Kroah-Hartman

From: Chunguang Xu <[email protected]>

commit 7d36665a5886c27ca4c4d0afd3ecc50b400f3587 upstream.

An eventfd monitors multiple memory thresholds of the cgroup, closes them, the kernel deletes all events related to this eventfd. Before all events are deleted, another eventfd monitors the memory threshold of this cgroup, leading to a crash:

  BUG: kernel NULL pointer dereference, address: 0000000000000004
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
  Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
  Workqueue: events memcg_event_remove
  RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
  RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001
  RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001
  RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010
  R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880
  R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0
  Call Trace:
    memcg_event_remove+0x32/0x90
    process_one_work+0x172/0x380
    worker_thread+0x49/0x3f0
    kthread+0xf8/0x130
    ret_from_fork+0x35/0x40
  CR2: 0000000000000004

We can reproduce this problem in the following ways:

1. We create a new cgroup subdirectory and a new eventfd, and then we monitor multiple memory thresholds of the cgroup through this eventfd.

2. closing this eventfd, and __mem_cgroup_usage_unregister_event () will be called multiple times to delete all events related to this eventfd.

The first time __mem_cgroup_usage_unregister_event() is called, the kernel will clear all items related to this eventfd in thresholds-> primary.

Since there is currently only one eventfd, thresholds-> primary becomes empty, so the kernel will set thresholds-> primary and hresholds-> spare to NULL. If at this time, the user creates a new eventfd and monitor the memory threshold of this cgroup, kernel will re-initialize thresholds-> primary.

Then when __mem_cgroup_usage_unregister_event () is called for the second time, because thresholds-> primary is not empty, the system will access thresholds-> spare, but thresholds-> spare is NULL, which will trigger a crash.

In general, the longer it takes to delete all events related to this eventfd, the easier it is to trigger this problem.

The solution is to check whether the thresholds associated with the eventfd has been cleared when deleting the event. If so, we do nothing.

[[email protected]: fix comment, per Kirill]
Fixes 907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Cc Johannes Weiner <[email protected]>
Cc Vladimir Davydov <[email protected]>
---
 mm/memcontrol.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
mm/memcontrol.c +8 -2
@@ -3480,7 +3480,7 @@ static void __mem_cgroup_usage_unregiste
 	struct mem_cgroup_thresholds *thresholds;
 	struct mem_cgroup_threshold_ary *new;
 	unsigned long usage;
-	int i, j, size;
+	int i, j, size, entries;
 
 	mutex_lock(&memcg->thresholds_lock);
 
@@ -3500,14 +3500,20 @@ static void __mem_cgroup_usage_unregiste
 	__mem_cgroup_threshold(memcg, type == _MEMSWAP);
 
 	/* Calculate new number of threshold */
-	size = 0;
+	size = entries = 0;
 	for (i = 0; i < thresholds->primary->size; i++) {
 		if (thresholds->primary->entries[i].eventfd != eventfd)
 			size++;
+		else
+			entries++;
 	}
 
 	new = thresholds->spare;
 
+	/* If no items related to eventfd have been cleared, nothing to do */
+	if (!entries)
+		goto unlock;
+
 	/* Set thresholds array to NULL if we don't have thresholds */
 	if (!size) {
 		kfree(new);
author maintainer
#23 lore raw

PATCH 23/91 mm: slub: be more careful about the double cmpxchg of freelist

In reply to Greg Kroah-Hartman

From: Linus Torvalds <[email protected]>

commit 5076190daded2197f62fe92cf69674488be44175 upstream.

This is just a cleanup addition to Jann's fix to properly update the transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").

The transaction ID is what protects us against any concurrent accesses, but we should really also make sure to make the 'freelist' comparison itself always use the same freelist value that we then used as the new next free pointer.

Jann points out that if we do all of this carefully, we could skip the transaction ID update for all the paths that only remove entries from the lists, and only update the TID when adding entries (to avoid the ABA issue with cmpxchg and list handling re-adding a previously seen value).

But this patch just does the "make sure to cmpxchg the same value we used" rather than then try to be clever.

---
 mm/slub.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
mm/slub.c +4 -2
@@ -2788,11 +2788,13 @@ redo:
 	barrier();
 
 	if (likely(page == c->page)) {
-		set_freepointer(s, tail_obj, c->freelist);
+		void **freelist = READ_ONCE(c->freelist);
+
+		set_freepointer(s, tail_obj, freelist);
 
 		if (unlikely(!this_cpu_cmpxchg_double(
 				s->cpu_slab->freelist, s->cpu_slab->tid,
-				c->freelist, tid,
+				freelist, tid,
 				head, next_tid(tid)))) {
 
 			note_cmpxchg_failure("slab_free", s, tid);
author maintainer
#25 lore raw

PATCH 25/91 x86/mm: split vmalloc_sync_all()

In reply to Greg Kroah-Hartman

From: Joerg Roedel <[email protected]>

commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream.

Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it.

Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings.

To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions:

* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()

Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit.

Shile Zhang directed us to a report of an 80% regression in reaim throughput.

---
 arch/x86/mm/fault.c      |   26 ++++++++++++++++++++++++--
 drivers/acpi/apei/ghes.c |    2 +-
 include/linux/vmalloc.h  |    5 +++--
 kernel/notifier.c        |    2 +-
 mm/nommu.c               |   10 +++++++---
 mm/vmalloc.c             |   11 +++++++----
 6 files changed, 43 insertions(+), 13 deletions(-)
arch/x86/mm/fault.c +24 -2
@@ -228,7 +228,7 @@ static inline pmd_t *vmalloc_sync_one(pg
 	return pmd_k;
 }
 
-void vmalloc_sync_all(void)
+static void vmalloc_sync(void)
 {
 	unsigned long address;
 
@@ -255,6 +255,16 @@ void vmalloc_sync_all(void)
 	}
 }
 
+void vmalloc_sync_mappings(void)
+{
+	vmalloc_sync();
+}
+
+void vmalloc_sync_unmappings(void)
+{
+	vmalloc_sync();
+}
+
 /*
  * 32-bit:
  *
@@ -349,11 +359,23 @@ out:
 
 #else /* CONFIG_X86_64: */
 
-void vmalloc_sync_all(void)
+void vmalloc_sync_mappings(void)
 {
+	/*
+	 * 64-bit mappings might allocate new p4d/pud pages
+	 * that need to be propagated to all tasks' PGDs.
+	 */
 	sync_global_pgds(VMALLOC_START & PGDIR_MASK, VMALLOC_END, 0);
 }
 
+void vmalloc_sync_unmappings(void)
+{
+	/*
+	 * Unmappings never allocate or free p4d/pud pages.
+	 * No work is required here.
+	 */
+}
+
 /*
  * 64-bit:
  *
drivers/acpi/apei/ghes.c +1 -1
@@ -229,7 +229,7 @@ static int ghes_estatus_pool_expand(unsi
 	 * New allocation must be visible in all pgd before it can be found by
 	 * an NMI allocating from the pool.
 	 */
-	vmalloc_sync_all();
+	vmalloc_sync_mappings();
 
 	return gen_pool_add(ghes_estatus_pool, addr, PAGE_ALIGN(len), -1);
 }
include/linux/vmalloc.h +3 -2
@@ -92,8 +92,9 @@ extern int remap_vmalloc_range_partial(s
 
 extern int remap_vmalloc_range(struct vm_area_struct *vma, void *addr,
 							unsigned long pgoff);
-void vmalloc_sync_all(void);
- 
+void vmalloc_sync_mappings(void);
+void vmalloc_sync_unmappings(void);
+
 /*
  *	Lowlevel-APIs (not for driver use!)
  */
kernel/notifier.c +1 -1
@@ -552,7 +552,7 @@ NOKPROBE_SYMBOL(notify_die);
 
 int register_die_notifier(struct notifier_block *nb)
 {
-	vmalloc_sync_all();
+	vmalloc_sync_mappings();
 	return atomic_notifier_chain_register(&die_chain, nb);
 }
 EXPORT_SYMBOL_GPL(register_die_notifier);
mm/nommu.c +7 -3
@@ -472,10 +472,14 @@ void vm_unmap_aliases(void)
 EXPORT_SYMBOL_GPL(vm_unmap_aliases);
 
 /*
- * Implement a stub for vmalloc_sync_all() if the architecture chose not to
- * have one.
+ * Implement a stub for vmalloc_sync_[un]mapping() if the architecture
+ * chose not to have one.
  */
-void __weak vmalloc_sync_all(void)
+void __weak vmalloc_sync_mappings(void)
+{
+}
+
+void __weak vmalloc_sync_unmappings(void)
 {
 }
 
mm/vmalloc.c +7 -4
@@ -1681,7 +1681,7 @@ void *__vmalloc_node_range(unsigned long
 	 * First make sure the mappings are removed from all page-tables
 	 * before they are freed.
 	 */
-	vmalloc_sync_all();
+	vmalloc_sync_unmappings();
 
 	/*
 	 * In this function, newly allocated vm_struct has VM_UNINITIALIZED
@@ -2218,16 +2218,19 @@ int remap_vmalloc_range(struct vm_area_s
 EXPORT_SYMBOL(remap_vmalloc_range);
 
 /*
- * Implement a stub for vmalloc_sync_all() if the architecture chose not to
- * have one.
+ * Implement stubs for vmalloc_sync_[un]mappings () if the architecture chose
+ * not to have one.
  *
  * The purpose of this function is to make sure the vmalloc area
  * mappings are identical in all page-tables in the system.
  */
-void __weak vmalloc_sync_all(void)
+void __weak vmalloc_sync_mappings(void)
 {
 }
 
+void __weak vmalloc_sync_unmappings(void)
+{
+}
 
 static int f(pte_t *pte, pgtable_t table, unsigned long addr, void *data)
 {
author maintainer
#26 lore raw

PATCH 26/91 USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL

In reply to Greg Kroah-Hartman

From: Anthony Mallet <[email protected]>

[ Upstream commit 633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 ]

close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other.

---
 drivers/usb/class/cdc-acm.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/usb/class/cdc-acm.c +5 -4
index 1930a8ec4b67d..3cb7a23e1253f 100644
@@ -841,10 +841,10 @@ static int get_serial_info(struct acm *acm, struct serial_struct __user *info)
 	tmp.flags = ASYNC_LOW_LATENCY;
 	tmp.xmit_fifo_size = acm->writesize;
 	tmp.baud_base = le32_to_cpu(acm->line.dwDTERate);
-	tmp.close_delay	= acm->port.close_delay / 10;
+	tmp.close_delay	= jiffies_to_msecs(acm->port.close_delay) / 10;
 	tmp.closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				acm->port.closing_wait / 10;
+				jiffies_to_msecs(acm->port.closing_wait) / 10;
 
 	if (copy_to_user(info, &tmp, sizeof(tmp)))
 		return -EFAULT;
@@ -862,9 +862,10 @@ static int set_serial_info(struct acm *acm,
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 		return -EFAULT;
 
-	close_delay = new_serial.close_delay * 10;
+	close_delay = msecs_to_jiffies(new_serial.close_delay * 10);
 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE :
+			msecs_to_jiffies(new_serial.closing_wait * 10);
 
 	mutex_lock(&acm->port.mutex);
 
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/91 ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 5461e0530c222129dfc941058be114b5cbc00837 upstream.

The return value checks in snd_pcm_plug_alloc() are covered with snd_BUG_ON() macro that may trigger a kernel WARNING depending on the kconfig. But since the error condition can be triggered by a weird user space parameter passed to OSS layer, we shouldn't give the kernel stack trace just for that. As it's a normal error condition, let's remove snd_BUG_ON() macro usage there.

---
 sound/core/oss/pcm_plugin.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/core/oss/pcm_plugin.c +2 -2
@@ -111,7 +111,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_su
 		while (plugin->next) {
 			if (plugin->dst_frames)
 				frames = plugin->dst_frames(plugin, frames);
-			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+			if ((snd_pcm_sframes_t)frames <= 0)
 				return -ENXIO;
 			plugin = plugin->next;
 			err = snd_pcm_plugin_alloc(plugin, frames);
@@ -123,7 +123,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_su
 		while (plugin->prev) {
 			if (plugin->src_frames)
 				frames = plugin->src_frames(plugin, frames);
-			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+			if ((snd_pcm_sframes_t)frames <= 0)
 				return -ENXIO;
 			plugin = plugin->prev;
 			err = snd_pcm_plugin_alloc(plugin, frames);
author maintainer
#61 lore raw

PATCH 60/91 genirq: Fix reference leaks on irq affinity notifiers

In reply to Greg Kroah-Hartman

From: Edward Cree <[email protected]>

commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream.

The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work.

Fixes cd7eab44e994 ("genirq: Add IRQ affinity notifiers")
Fixes 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption")
---
 kernel/irq/manage.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
kernel/irq/manage.c +9 -2
@@ -220,7 +220,11 @@ int irq_set_affinity_locked(struct irq_d
 
 	if (desc->affinity_notify) {
 		kref_get(&desc->affinity_notify->kref);
-		schedule_work(&desc->affinity_notify->work);
+		if (!schedule_work(&desc->affinity_notify->work)) {
+			/* Work was already scheduled, drop our extra ref */
+			kref_put(&desc->affinity_notify->kref,
+				 desc->affinity_notify->release);
+		}
 	}
 	irqd_set(data, IRQD_AFFINITY_SET);
 
@@ -320,7 +324,10 @@ irq_set_affinity_notifier(unsigned int i
 	raw_spin_unlock_irqrestore(&desc->lock, flags);
 
 	if (old_notify) {
-		cancel_work_sync(&old_notify->work);
+		if (cancel_work_sync(&old_notify->work)) {
+			/* Pending work had a ref, put that one too */
+			kref_put(&old_notify->kref, old_notify->release);
+		}
 		kref_put(&old_notify->kref, old_notify->release);
 	}
 
author maintainer
#70 lore raw

PATCH 69/91 USB: serial: option: add Wistron Neweb D19Q1

In reply to Greg Kroah-Hartman

From: Pawel Dembicki <[email protected]>

commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream.

This modem is embedded on dlink dwr-960 router.
The oem configuration states:

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1435 ProdID=d191 Rev=ff.ff
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1983,6 +1983,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff),			/* Wistron Neweb D19Q1 */
+	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff),			/* ASKEY WWHC050 */
 	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
author maintainer
#71 lore raw

PATCH 70/91 USB: cdc-acm: restore capability check order

In reply to Greg Kroah-Hartman

From: Matthias Reichl <[email protected]>

commit 62d65bdd9d05158aa2547f8ef72375535f3bc6e3 upstream.

commit b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") introduced a regression by changing the order of capability and close settings change checks. When running with CAP_SYS_ADMIN setting the close settings to the values already set resulted in -EOPNOTSUPP.

Fix this by changing the check order back to how it was before.

Fixes b401f8c4f492c ("USB: cdc-acm: fix rounding error in TIOCSSERIAL")
Cc Anthony Mallet <[email protected]>
Cc stable <[email protected]>
Cc Oliver Neukum <[email protected]>
---
 drivers/usb/class/cdc-acm.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/usb/class/cdc-acm.c +9 -9
@@ -876,16 +876,16 @@ static int set_serial_info(struct acm *a
 
 	mutex_lock(&acm->port.mutex);
 
-	if ((new_serial.close_delay != old_close_delay) ||
-            (new_serial.closing_wait != old_closing_wait)) {
-		if (!capable(CAP_SYS_ADMIN))
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((new_serial.close_delay != old_close_delay) ||
+	            (new_serial.closing_wait != old_closing_wait))
 			retval = -EPERM;
-		else {
-			acm->port.close_delay  = close_delay;
-			acm->port.closing_wait = closing_wait;
-		}
-	} else
-		retval = -EOPNOTSUPP;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		acm->port.close_delay  = close_delay;
+		acm->port.closing_wait = closing_wait;
+	}
 
 	mutex_unlock(&acm->port.mutex);
 	return retval;
author maintainer
#72 lore raw

PATCH 71/91 USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback

In reply to Greg Kroah-Hartman

From: Qiujun Huang <[email protected]>

commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream.

Fix slab-out-of-bounds read in the interrupt-URB completion handler.

The boundary condition should be (length - 1) as we access data[position + 1].

Reported-and-tested-by [email protected]
Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc stable <[email protected]>
---
 drivers/usb/serial/io_edgeport.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/serial/io_edgeport.c +1 -1
@@ -634,7 +634,7 @@ static void edge_interrupt_callback(stru
 		/* grab the txcredits for the ports if available */
 		position = 2;
 		portNumber = 0;
-		while ((position < length) &&
+		while ((position < length - 1) &&
 				(portNumber < edge_serial->serial->num_ports)) {
 			txCredits = data[position] | (data[position+1] << 8);
 			if (txCredits) {
author maintainer
#73 lore raw

PATCH 72/91 usb: musb: fix crash with highmen PIO and usbmon

In reply to Greg Kroah-Hartman

From: Mans Rullgard <[email protected]>

commit 52974d94a206ce428d9d9b6eaa208238024be82a upstream.

When handling a PIO bulk transfer with highmem buffer, a temporary mapping is assigned to urb->transfer_buffer. After the transfer is complete, an invalid address is left behind in this pointer. This is not ordinarily a problem since nothing touches that buffer before the urb is released. However, when usbmon is active, usbmon_urb_complete() calls (indirectly) mon_bin_get_data() which does access the transfer buffer if it is set. To prevent an invalid memory access here, reset urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not set it at all (musb_host_tx()).

Fixes 8e8a55165469 ("usb: musb: host: Handle highmem in PIO mode")
---
 drivers/usb/musb/musb_host.c |   17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)
drivers/usb/musb/musb_host.c +5 -12
@@ -1519,10 +1519,7 @@ done:
 	 * We need to map sg if the transfer_buffer is
 	 * NULL.
 	 */
-	if (!urb->transfer_buffer)
-		qh->use_sg = true;
-
-	if (qh->use_sg) {
+	if (!urb->transfer_buffer) {
 		/* sg_miter_start is already done in musb_ep_program */
 		if (!sg_miter_next(&qh->sg_miter)) {
 			dev_err(musb->controller, "error: sg list empty\n");
@@ -1530,9 +1527,8 @@ done:
 			status = -EINVAL;
 			goto done;
 		}
-		urb->transfer_buffer = qh->sg_miter.addr;
 		length = min_t(u32, length, qh->sg_miter.length);
-		musb_write_fifo(hw_ep, length, urb->transfer_buffer);
+		musb_write_fifo(hw_ep, length, qh->sg_miter.addr);
 		qh->sg_miter.consumed = length;
 		sg_miter_stop(&qh->sg_miter);
 	} else {
@@ -1541,11 +1537,6 @@ done:
 
 	qh->segsize = length;
 
-	if (qh->use_sg) {
-		if (offset + length >= urb->transfer_buffer_length)
-			qh->use_sg = false;
-	}
-
 	musb_ep_select(mbase, epnum);
 	musb_writew(epio, MUSB_TXCSR,
 			MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
@@ -2064,8 +2055,10 @@ finish:
 	urb->actual_length += xfer_len;
 	qh->offset += xfer_len;
 	if (done) {
-		if (qh->use_sg)
+		if (qh->use_sg) {
 			qh->use_sg = false;
+			urb->transfer_buffer = NULL;
+		}
 
 		if (urb->status == -EINPROGRESS)
 			urb->status = status;
author maintainer
#74 lore raw

PATCH 73/91 media: flexcop-usb: fix endpoint sanity check

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit bca243b1ce0e46be26f7c63b5591dfbb41f558e5 upstream.

commit 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking") added an endpoint sanity check to address a NULL-pointer dereference on probe. Unfortunately the check was done on the current altsetting which was later changed.

Fix this by moving the sanity check to after the altsetting is changed.

Fixes 1b976fc6d684 ("media: b2c2-flexcop-usb: add sanity checking")
Cc Oliver Neukum <[email protected]>
Cc stable <[email protected]>
---
 drivers/media/usb/b2c2/flexcop-usb.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/media/usb/b2c2/flexcop-usb.c +3 -3
@@ -481,6 +481,9 @@ static int flexcop_usb_init(struct flexc
 		return ret;
 	}
 
+	if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	switch (fc_usb->udev->speed) {
 	case USB_SPEED_LOW:
 		err("cannot handle USB speed because it is too slow.");
@@ -514,9 +517,6 @@ static int flexcop_usb_probe(struct usb_
 	struct flexcop_device *fc = NULL;
 	int ret;
 
-	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
-		return -ENODEV;
-
 	if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
 		err("out of memory\n");
 		return -ENOMEM;
author maintainer
#75 lore raw

PATCH 74/91 media: usbtv: fix control-message timeouts

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 536f561d871c5781bc33d26d415685211b94032e upstream.

The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on various user requests due to a malfunctioning (or malicious) device until the device is physically disconnected.

The USB upper limit of five seconds per request should be more than enough.

Fixes f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber")
Fixes c53a846c48f2 ("[media] usbtv: add video controls")
Cc stable <[email protected]> # 3.11
---
 drivers/media/usb/usbtv/usbtv-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/usb/usbtv/usbtv-core.c +1 -1
@@ -42,7 +42,7 @@ int usbtv_set_regs(struct usbtv *usbtv,
 
 		ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, NULL, 0, 0);
+			value, index, NULL, 0, USB_CTRL_GET_TIMEOUT);
 		if (ret < 0)
 			return ret;
 	}
author maintainer
#76 lore raw

PATCH 75/91 staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table

In reply to Greg Kroah-Hartman

From: Larry Finger <[email protected]>

commit 38ef48f7d4b7342f145a1b4f96023bde99aeb245 upstream.

The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device. Add it to the device tables.

---
 drivers/staging/rtl8188eu/os_dep/usb_intf.c |    1 +
 1 file changed, 1 insertion(+)
drivers/staging/rtl8188eu/os_dep/usb_intf.c +1 -0
@@ -44,6 +44,7 @@ static struct usb_device_id rtw_usb_id_t
 	/****** 8188EUS ********/
 	{USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */
 	{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
+	{USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */
 	{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
 	{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
author maintainer
#77 lore raw

PATCH 76/91 staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback

In reply to Greg Kroah-Hartman

From: Qiujun Huang <[email protected]>

commit 1165dd73e811a07d947aee218510571f516081f6 upstream.

We can't handle the case length > WLAN_DATA_MAXLEN.
Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that.

Thanks-to: Hillf Danton <[email protected]>

---
 drivers/staging/wlan-ng/hfa384x_usb.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/staging/wlan-ng/hfa384x_usb.c +2 -0
@@ -3574,6 +3574,8 @@ static void hfa384x_int_rxmonitor(wlande
 	     WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
 		pr_debug("overlen frm: len=%zd\n",
 			 skblen - sizeof(struct p80211_caphdr));
+
+		return;
 	}
 
 	skb = dev_alloc_skb(skblen);
author maintainer
#78 lore raw

PATCH 77/91 libfs: fix infoleak in simple_attr_read()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit a65cab7d7f05c2061a3e2490257d3086ff3202c6 upstream.

Reading from a debugfs file at a nonzero position, without first reading at position 0, leaks uninitialized memory to userspace.

It's a bit tricky to do this, since lseek() and pread() aren't allowed on these files, and write() doesn't update the position on them. But writing to them with splice() *does* update the position:

	#define _GNU_SOURCE 1
	#include <fcntl.h>
	#include <stdio.h>
	#include <unistd.h>
	int main()
	{
		int pipes[2], fd, n, i;
		char buf[32];

		pipe(pipes);
		write(pipes[1], "0", 1);
		fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR);
		splice(pipes[0], NULL, fd, NULL, 1, 0);
		n = read(fd, buf, sizeof(buf));
		for (i = 0; i < n; i++)
			printf("%02x", buf[i]);
		printf("\n");
	}

Output:

	5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30

Fix the infoleak by making simple_attr_read() always fill simple_attr::get_buf if it hasn't been filled yet.

---
 fs/libfs.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
fs/libfs.c +5 -3
@@ -761,7 +761,7 @@ int simple_attr_open(struct inode *inode
 {
 	struct simple_attr *attr;
 
-	attr = kmalloc(sizeof(*attr), GFP_KERNEL);
+	attr = kzalloc(sizeof(*attr), GFP_KERNEL);
 	if (!attr)
 		return -ENOMEM;
 
@@ -801,9 +801,11 @@ ssize_t simple_attr_read(struct file *fi
 	if (ret)
 		return ret;
 
-	if (*ppos) {		/* continued read */
+	if (*ppos && attr->get_buf[0]) {
+		/* continued read */
 		size = strlen(attr->get_buf);
-	} else {		/* first read */
+	} else {
+		/* first read */
 		u64 val;
 		ret = attr->get(attr->data, &val);
 		if (ret)
author maintainer
#79 lore raw

PATCH 78/91 media: ov519: add missing endpoint sanity checks

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 998912346c0da53a6dbb71fab3a138586b596b30 upstream.

Make sure to check that we have at least one endpoint before accessing the endpoint array to avoid dereferencing a NULL-pointer on stream start.

Note that these sanity checks are not redundant as the driver is mixing looking up altsettings by index and by number, which need not coincide.

Fixes 1876bb923c98 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge")
Fixes b282d87332f5 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)")
Cc stable <[email protected]> # 2.6.31
Cc Hans de Goede <[email protected]>
---
 drivers/media/usb/gspca/ov519.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/media/usb/gspca/ov519.c +10 -0
@@ -3507,6 +3507,11 @@ static void ov511_mode_init_regs(struct
 		return;
 	}
 
+	if (alt->desc.bNumEndpoints < 1) {
+		sd->gspca_dev.usb_err = -ENODEV;
+		return;
+	}
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
 
@@ -3632,6 +3637,11 @@ static void ov518_mode_init_regs(struct
 		return;
 	}
 
+	if (alt->desc.bNumEndpoints < 1) {
+		sd->gspca_dev.usb_err = -ENODEV;
+		return;
+	}
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
author maintainer
#62 lore raw

PATCH 61/91 vti[6]: fix packet tx through bpf_redirect() in XinY cases

In reply to Greg Kroah-Hartman

From: Nicolas Dichtel <[email protected]>

commit f1ed10264ed6b66b9cd5e8461cffce69be482356 upstream.

I forgot the 4in6/6in4 cases in my previous patch. Let's fix them.

Fixes 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()")
---
 net/ipv4/Kconfig   |    1 +
 net/ipv4/ip_vti.c  |   36 +++++++++++++++++++++++++++++-------
 net/ipv6/ip6_vti.c |   32 +++++++++++++++++++++++++-------
 3 files changed, 55 insertions(+), 14 deletions(-)
net/ipv4/Kconfig +1 -0
@@ -298,6 +298,7 @@ config SYN_COOKIES
 
 config NET_IPVTI
 	tristate "Virtual (secure) IP: tunneling"
+	depends on IPV6 || IPV6=n
 	select INET_TUNNEL
 	select NET_IP_TUNNEL
 	depends on INET_XFRM_MODE_TUNNEL
net/ipv4/ip_vti.c +29 -7
@@ -195,17 +195,39 @@ static netdev_tx_t vti_xmit(struct sk_bu
 	int err;
 
 	if (!dst) {
-		struct rtable *rt;
+		switch (skb->protocol) {
+		case htons(ETH_P_IP): {
+			struct rtable *rt;
 
-		fl->u.ip4.flowi4_oif = dev->ifindex;
-		fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
-		rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
-		if (IS_ERR(rt)) {
+			fl->u.ip4.flowi4_oif = dev->ifindex;
+			fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+			rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+			if (IS_ERR(rt)) {
+				dev->stats.tx_carrier_errors++;
+				goto tx_error_icmp;
+			}
+			dst = &rt->dst;
+			skb_dst_set(skb, dst);
+			break;
+		}
+#if IS_ENABLED(CONFIG_IPV6)
+		case htons(ETH_P_IPV6):
+			fl->u.ip6.flowi6_oif = dev->ifindex;
+			fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+			dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+			if (dst->error) {
+				dst_release(dst);
+				dst = NULL;
+				dev->stats.tx_carrier_errors++;
+				goto tx_error_icmp;
+			}
+			skb_dst_set(skb, dst);
+			break;
+#endif
+		default:
 			dev->stats.tx_carrier_errors++;
 			goto tx_error_icmp;
 		}
-		dst = &rt->dst;
-		skb_dst_set(skb, dst);
 	}
 
 	dst_hold(dst);
net/ipv6/ip6_vti.c +25 -7
@@ -442,15 +442,33 @@ vti6_xmit(struct sk_buff *skb, struct ne
 	int mtu;
 
 	if (!dst) {
-		fl->u.ip6.flowi6_oif = dev->ifindex;
-		fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
-		dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
-		if (dst->error) {
-			dst_release(dst);
-			dst = NULL;
+		switch (skb->protocol) {
+		case htons(ETH_P_IP): {
+			struct rtable *rt;
+
+			fl->u.ip4.flowi4_oif = dev->ifindex;
+			fl->u.ip4.flowi4_flags |= FLOWI_FLAG_ANYSRC;
+			rt = __ip_route_output_key(dev_net(dev), &fl->u.ip4);
+			if (IS_ERR(rt))
+				goto tx_err_link_failure;
+			dst = &rt->dst;
+			skb_dst_set(skb, dst);
+			break;
+		}
+		case htons(ETH_P_IPV6):
+			fl->u.ip6.flowi6_oif = dev->ifindex;
+			fl->u.ip6.flowi6_flags |= FLOWI_FLAG_ANYSRC;
+			dst = ip6_route_output(dev_net(dev), NULL, &fl->u.ip6);
+			if (dst->error) {
+				dst_release(dst);
+				dst = NULL;
+				goto tx_err_link_failure;
+			}
+			skb_dst_set(skb, dst);
+			break;
+		default:
 			goto tx_err_link_failure;
 		}
-		skb_dst_set(skb, dst);
 	}
 
 	dst_hold(dst);
author maintainer
#80 lore raw

PATCH 79/91 media: dib0700: fix rc endpoint lookup

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit f52981019ad8d6718de79b425a574c6bddf81f7c upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid submitting an URB to an invalid endpoint.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes c4018fa2e4c0 ("[media] dib0700: fix RC support on Hauppauge Nova-TD")
Cc stable <[email protected]> # 3.16
---
 drivers/media/usb/dvb-usb/dib0700_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/usb/dvb-usb/dib0700_core.c +2 -2
@@ -783,7 +783,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
 
 	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
 
-	if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1)
+	if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
 		return -ENODEV;
 
 	purb = usb_alloc_urb(0, GFP_KERNEL);
@@ -805,7 +805,7 @@ int dib0700_rc_setup(struct dvb_usb_devi
 	 * Some devices like the Hauppauge NovaTD model 52009 use an interrupt
 	 * endpoint, while others use a bulk one.
 	 */
-	e = &intf->altsetting[0].endpoint[rc_ep].desc;
+	e = &intf->cur_altsetting->endpoint[rc_ep].desc;
 	if (usb_endpoint_dir_in(e)) {
 		if (usb_endpoint_xfer_bulk(e)) {
 			pipe = usb_rcvbulkpipe(d->udev, rc_ep);
author maintainer
#82 lore raw

PATCH 81/91 media: xirlink_cit: add missing descriptor sanity checks

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit a246b4d547708f33ff4d4b9a7a5dbac741dc89d8 upstream.

Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors.

Note that the sanity check in cit_get_packet_size() is not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide.

Fixes 659fefa0eb17 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01")
Fixes 59f8b0bf3c12 ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting")
Cc stable <[email protected]> # 2.6.37
Cc Hans de Goede <[email protected]>
---
 drivers/media/usb/gspca/xirlink_cit.c |   18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
drivers/media/usb/gspca/xirlink_cit.c +17 -1
@@ -1455,6 +1455,9 @@ static int cit_get_packet_size(struct gs
 		return -EIO;
 	}
 
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 }
 
@@ -2638,6 +2641,7 @@ static int sd_start(struct gspca_dev *gs
 
 static int sd_isoc_init(struct gspca_dev *gspca_dev)
 {
+	struct usb_interface_cache *intfc;
 	struct usb_host_interface *alt;
 	int max_packet_size;
 
@@ -2653,8 +2657,17 @@ static int sd_isoc_init(struct gspca_dev
 		break;
 	}
 
+	intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+	if (intfc->num_altsetting < 2)
+		return -ENODEV;
+
+	alt = &intfc->altsetting[1];
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
 
 	return 0;
@@ -2677,6 +2690,9 @@ static int sd_isoc_nego(struct gspca_dev
 		break;
 	}
 
+	/*
+	 * Existence of altsetting and endpoint was verified in sd_isoc_init()
+	 */
 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	if (packet_size <= min_packet_size)
author maintainer
#81 lore raw

PATCH 80/91 media: stv06xx: add missing descriptor sanity checks

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.

Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays.

This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors.

Note that the sanity checks in stv06xx_start() and pb0100_start() are not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide.

Fixes 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc stable <[email protected]> # 2.6.31
Cc Hans de Goede <[email protected]>
---
 drivers/media/usb/gspca/stv06xx/stv06xx.c        |   19 ++++++++++++++++++-
 drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c |    4 ++++
 2 files changed, 22 insertions(+), 1 deletion(-)
drivers/media/usb/gspca/stv06xx/stv06xx.c +18 -1
@@ -293,6 +293,9 @@ static int stv06xx_start(struct gspca_de
 		return -EIO;
 	}
 
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
 	if (err < 0)
@@ -317,11 +320,21 @@ out:
 
 static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
 {
+	struct usb_interface_cache *intfc;
 	struct usb_host_interface *alt;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+	if (intfc->num_altsetting < 2)
+		return -ENODEV;
+
+	alt = &intfc->altsetting[1];
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
-	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	alt->endpoint[0].desc.wMaxPacketSize =
 		cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
 
@@ -334,6 +347,10 @@ static int stv06xx_isoc_nego(struct gspc
 	struct usb_host_interface *alt;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	/*
+	 * Existence of altsetting and endpoint was verified in
+	 * stv06xx_isoc_init()
+	 */
 	alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c +4 -0
@@ -198,6 +198,10 @@ static int pb0100_start(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt)
 		return -ENODEV;
+
+	if (alt->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 
 	/* If we don't have enough bandwidth use a lower framerate */
author maintainer
#83 lore raw

PATCH 82/91 vt: selection, introduce vc_is_sel

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit dce05aa6eec977f1472abed95ccd71276b9a3864 upstream.

Avoid global variables (namely sel_cons) by introducing vc_is_sel. It checks whether the parameter is the current selection console. This will help putting sel_cons to a struct later.

---
 drivers/tty/vt/selection.c |    5 +++++
 drivers/tty/vt/vt.c        |    7 ++++---
 drivers/tty/vt/vt_ioctl.c  |    2 +-
 include/linux/selection.h  |    4 +++-
 4 files changed, 13 insertions(+), 5 deletions(-)
drivers/tty/vt/selection.c +5 -0
@@ -80,6 +80,11 @@ void clear_selection(void)
 	}
 }
 
+bool vc_is_sel(struct vc_data *vc)
+{
+	return vc == sel_cons;
+}
+
 /*
  * User settable table: what characters are to be considered alphabetic?
  * 256 bits. Locked by the console lock.
drivers/tty/vt/vt.c +4 -3
@@ -600,8 +600,9 @@ static void hide_softcursor(struct vc_da
 
 static void hide_cursor(struct vc_data *vc)
 {
-	if (vc == sel_cons)
+	if (vc_is_sel(vc))
 		clear_selection();
+
 	vc->vc_sw->con_cursor(vc, CM_ERASE);
 	hide_softcursor(vc);
 }
@@ -612,7 +613,7 @@ static void set_cursor(struct vc_data *v
 	    vc->vc_mode == KD_GRAPHICS)
 		return;
 	if (vc->vc_deccm) {
-		if (vc == sel_cons)
+		if (vc_is_sel(vc))
 			clear_selection();
 		add_softcursor(vc);
 		if ((vc->vc_cursor_type & 0x0f) != 1)
@@ -878,7 +879,7 @@ static int vc_do_resize(struct tty_struc
 	if (!newscreen)
 		return -ENOMEM;
 
-	if (vc == sel_cons)
+	if (vc_is_sel(vc))
 		clear_selection();
 
 	old_rows = vc->vc_rows;
drivers/tty/vt/vt_ioctl.c +1 -1
@@ -42,7 +42,7 @@ char vt_dont_switch;
 extern struct tty_driver *console_driver;
 
 #define VT_IS_IN_USE(i)	(console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
+#define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
 
 /*
  * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
include/linux/selection.h +3 -1
@@ -12,8 +12,8 @@
 
 struct tty_struct;
 
-extern struct vc_data *sel_cons;
 struct tty_struct;
+struct vc_data;
 
 extern void clear_selection(void);
 extern int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty);
@@ -22,6 +22,8 @@ extern int sel_loadlut(char __user *p);
 extern int mouse_reporting(void);
 extern void mouse_report(struct tty_struct * tty, int butt, int mrx, int mry);
 
+bool vc_is_sel(struct vc_data *vc);
+
 extern int console_blanked;
 
 extern unsigned char color_table[];
author maintainer
#84 lore raw

PATCH 83/91 vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit e587e8f17433ddb26954f0edf5b2f95c42155ae9 upstream.

These two were macros. Switch them to static inlines, so that it's more understandable what they are doing.

---
 drivers/tty/vt/vt_ioctl.c |   29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)
drivers/tty/vt/vt_ioctl.c +22 -7
@@ -39,10 +39,25 @@
 #include <linux/selection.h>
 
 char vt_dont_switch;
-extern struct tty_driver *console_driver;
 
-#define VT_IS_IN_USE(i)	(console_driver->ttys[i] && console_driver->ttys[i]->count)
-#define VT_BUSY(i)	(VT_IS_IN_USE(i) || i == fg_console || vc_is_sel(vc_cons[i].d))
+static inline bool vt_in_use(unsigned int i)
+{
+	extern struct tty_driver *console_driver;
+
+	return console_driver->ttys[i] && console_driver->ttys[i]->count;
+}
+
+static inline bool vt_busy(int i)
+{
+	if (vt_in_use(i))
+		return true;
+	if (i == fg_console)
+		return true;
+	if (vc_is_sel(vc_cons[i].d))
+		return true;
+
+	return false;
+}
 
 /*
  * Console (vt and kd) routines, as defined by USL SVR4 manual, and by
@@ -292,7 +307,7 @@ static int vt_disallocate(unsigned int v
 	int ret = 0;
 
 	console_lock();
-	if (VT_BUSY(vc_num))
+	if (vt_busy(vc_num))
 		ret = -EBUSY;
 	else if (vc_num)
 		vc = vc_deallocate(vc_num);
@@ -314,7 +329,7 @@ static void vt_disallocate_all(void)
 
 	console_lock();
 	for (i = 1; i < MAX_NR_CONSOLES; i++)
-		if (!VT_BUSY(i))
+		if (!vt_busy(i))
 			vc[i] = vc_deallocate(i);
 		else
 			vc[i] = NULL;
@@ -651,7 +666,7 @@ int vt_ioctl(struct tty_struct *tty,
 			state = 1;	/* /dev/tty0 is always open */
 			for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
 							++i, mask <<= 1)
-				if (VT_IS_IN_USE(i))
+				if (vt_in_use(i))
 					state |= mask;
 			ret = put_user(state, &vtstat->v_state);
 		}
@@ -664,7 +679,7 @@ int vt_ioctl(struct tty_struct *tty,
 	case VT_OPENQRY:
 		/* FIXME: locking ? - but then this is a stupid API */
 		for (i = 0; i < MAX_NR_CONSOLES; ++i)
-			if (! VT_IS_IN_USE(i))
+			if (!vt_in_use(i))
 				break;
 		uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
 		goto setint;		 
author maintainer
#85 lore raw

PATCH 84/91 vt: switch vt_dont_switch to bool

In reply to Greg Kroah-Hartman

From: Jiri Slaby <[email protected]>

commit f400991bf872debffb01c46da882dc97d7e3248e upstream.

vt_dont_switch is pure boolean, no need for whole char.

---
 drivers/tty/vt/vt_ioctl.c |    6 +++---
 include/linux/vt_kern.h   |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/tty/vt/vt_ioctl.c +3 -3
@@ -38,7 +38,7 @@
 #include <linux/kbd_diacr.h>
 #include <linux/selection.h>
 
-char vt_dont_switch;
+bool vt_dont_switch;
 
 static inline bool vt_in_use(unsigned int i)
 {
@@ -1035,12 +1035,12 @@ int vt_ioctl(struct tty_struct *tty,
 	case VT_LOCKSWITCH:
 		if (!capable(CAP_SYS_TTY_CONFIG))
 			return -EPERM;
-		vt_dont_switch = 1;
+		vt_dont_switch = true;
 		break;
 	case VT_UNLOCKSWITCH:
 		if (!capable(CAP_SYS_TTY_CONFIG))
 			return -EPERM;
-		vt_dont_switch = 0;
+		vt_dont_switch = false;
 		break;
 	case VT_GETHIFONTMASK:
 		ret = put_user(vc->vc_hi_font_mask,
include/linux/vt_kern.h +1 -1
@@ -142,7 +142,7 @@ static inline bool vt_force_oops_output(
 	return false;
 }
 
-extern char vt_dont_switch;
+extern bool vt_dont_switch;
 extern int default_utf8;
 extern int global_cursor_default;
 
author maintainer
#86 lore raw

PATCH 85/91 vt: vt_ioctl: remove unnecessary console allocation checks

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 1aa6e058dd6cd04471b1f21298270014daf48ac9 upstream.

The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are unnecessary because they can only be reached by calling ioctl() on an open tty, which implies the corresponding virtual console is allocated.

And even if the virtual console *could* be freed concurrently, then these checks would be broken since they aren't done under console_lock, and the vc_data is dereferenced before them anyway.

So, remove these unneeded checks to avoid confusion.

---
 drivers/tty/vt/vt_ioctl.c |   21 ++-------------------
 1 file changed, 2 insertions(+), 19 deletions(-)
drivers/tty/vt/vt_ioctl.c +2 -19
@@ -353,22 +353,13 @@ int vt_ioctl(struct tty_struct *tty,
 {
 	struct vc_data *vc = tty->driver_data;
 	struct console_font_op op;	/* used in multiple places here */
-	unsigned int console;
+	unsigned int console = vc->vc_num;
 	unsigned char ucval;
 	unsigned int uival;
 	void __user *up = (void __user *)arg;
 	int i, perm;
 	int ret = 0;
 
-	console = vc->vc_num;
-
-
-	if (!vc_cons_allocated(console)) { 	/* impossible? */
-		ret = -ENOIOCTLCMD;
-		goto out;
-	}
-
-
 	/*
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1208,18 +1199,10 @@ long vt_compat_ioctl(struct tty_struct *
 {
 	struct vc_data *vc = tty->driver_data;
 	struct console_font_op op;	/* used in multiple places here */
-	unsigned int console;
 	void __user *up = (void __user *)arg;
 	int perm;
 	int ret = 0;
 
-	console = vc->vc_num;
-
-	if (!vc_cons_allocated(console)) { 	/* impossible? */
-		ret = -ENOIOCTLCMD;
-		goto out;
-	}
-
 	/*
 	 * To have permissions to do most of the vt ioctls, we either have
 	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
@@ -1279,7 +1262,7 @@ long vt_compat_ioctl(struct tty_struct *
 		arg = (unsigned long)compat_ptr(arg);
 		goto fallback;
 	}
-out:
+
 	return ret;
 
 fallback:
author maintainer
#87 lore raw

PATCH 86/91 vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit ca4463bf8438b403596edd0ec961ca0d4fbe0220 upstream.

The VT_DISALLOCATE ioctl can free a virtual console while tty_release() is still running, causing a use-after-free in con_shutdown(). This occurs because VT_DISALLOCATE considers a virtual console's 'struct vc_data' to be unused as soon as the corresponding tty's refcount hits 0. But actually it may be still being closed.

Fix this by making vc_data be reference-counted via the embedded 'struct tty_port'. A newly allocated virtual console has refcount 1. Opening it for the first time increments the refcount to 2. Closing it for the last time decrements the refcount (in tty_operations::cleanup() so that it happens late enough), as does VT_DISALLOCATE.

Reproducer:

	#include <fcntl.h>
	#include <linux/vt.h>
	#include <sys/ioctl.h>
	#include <unistd.h>

	int main()
	{
		if (fork()) {
			for (;;)
				close(open("/dev/tty5", O_RDWR));
		} else {
			int fd = open("/dev/tty10", O_RDWR);

			for (;;)
				ioctl(fd, VT_DISALLOCATE, 5);
		}
	}

KASAN report:

	BUG: KASAN: use-after-free in con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
	Write of size 8 at addr ffff88806a4ec108 by task syz_vt/129

	CPU: 0 PID: 129 Comm: syz_vt Not tainted 5.6.0-rc2 #11
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	Call Trace:
	 [...]
	 con_shutdown+0x76/0x80 drivers/tty/vt/vt.c:3278
	 release_tty+0xa8/0x410 drivers/tty/tty_io.c:1514
	 tty_release_struct+0x34/0x50 drivers/tty/tty_io.c:1629
	 tty_release+0x984/0xed0 drivers/tty/tty_io.c:1789
	 [...]

	Allocated by task 129:
	 [...]
	 kzalloc include/linux/slab.h:669 [inline]
	 vc_allocate drivers/tty/vt/vt.c:1085 [inline]
	 vc_allocate+0x1ac/0x680 drivers/tty/vt/vt.c:1066
	 con_install+0x4d/0x3f0 drivers/tty/vt/vt.c:3229
	 tty_driver_install_tty drivers/tty/tty_io.c:1228 [inline]
	 tty_init_dev+0x94/0x350 drivers/tty/tty_io.c:1341
	 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
	 tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
	 [...]

	Freed by task 130:
	 [...]
	 kfree+0xbf/0x1e0 mm/slab.c:3757
	 vt_disallocate drivers/tty/vt/vt_ioctl.c:300 [inline]
	 vt_ioctl+0x16dc/0x1e30 drivers/tty/vt/vt_ioctl.c:818
	 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
	 [...]
Fixes 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc <[email protected]> # v3.4+
Reported-by [email protected]
---
 drivers/tty/vt/vt.c       |   23 ++++++++++++++++++++++-
 drivers/tty/vt/vt_ioctl.c |   12 ++++--------
 2 files changed, 26 insertions(+), 9 deletions(-)
drivers/tty/vt/vt.c +22 -1
@@ -760,6 +760,17 @@ static void visual_init(struct vc_data *
 	vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
 }
 
+static void vc_port_destruct(struct tty_port *port)
+{
+	struct vc_data *vc = container_of(port, struct vc_data, port);
+
+	kfree(vc);
+}
+
+static const struct tty_port_operations vc_port_ops = {
+	.destruct = vc_port_destruct,
+};
+
 int vc_allocate(unsigned int currcons)	/* return 0 on success */
 {
 	WARN_CONSOLE_UNLOCKED();
@@ -785,6 +796,7 @@ int vc_allocate(unsigned int currcons)	/
 		return -ENOMEM;
 	    vc_cons[currcons].d = vc;
 	    tty_port_init(&vc->port);
+	    vc->port.ops = &vc_port_ops;
 	    INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
 	    visual_init(vc, currcons, 1);
 	    if (!*vc->vc_uni_pagedir_loc)
@@ -2894,6 +2906,7 @@ static int con_install(struct tty_driver
 
 	tty->driver_data = vc;
 	vc->port.tty = tty;
+	tty_port_get(&vc->port);
 
 	if (!tty->winsize.ws_row && !tty->winsize.ws_col) {
 		tty->winsize.ws_row = vc_cons[currcons].d->vc_rows;
@@ -2929,6 +2942,13 @@ static void con_shutdown(struct tty_stru
 	console_unlock();
 }
 
+static void con_cleanup(struct tty_struct *tty)
+{
+	struct vc_data *vc = tty->driver_data;
+
+	tty_port_put(&vc->port);
+}
+
 static int default_color           = 7; /* white */
 static int default_italic_color    = 2; // green (ASCII)
 static int default_underline_color = 3; // cyan (ASCII)
@@ -3053,7 +3073,8 @@ static const struct tty_operations con_o
 	.throttle = con_throttle,
 	.unthrottle = con_unthrottle,
 	.resize = vt_resize,
-	.shutdown = con_shutdown
+	.shutdown = con_shutdown,
+	.cleanup = con_cleanup,
 };
 
 static struct cdev vc0_cdev;
drivers/tty/vt/vt_ioctl.c +4 -8
@@ -313,10 +313,8 @@ static int vt_disallocate(unsigned int v
 		vc = vc_deallocate(vc_num);
 	console_unlock();
 
-	if (vc && vc_num >= MIN_NR_CONSOLES) {
-		tty_port_destroy(&vc->port);
-		kfree(vc);
-	}
+	if (vc && vc_num >= MIN_NR_CONSOLES)
+		tty_port_put(&vc->port);
 
 	return ret;
 }
@@ -336,10 +334,8 @@ static void vt_disallocate_all(void)
 	console_unlock();
 
 	for (i = 1; i < MAX_NR_CONSOLES; i++) {
-		if (vc[i] && i >= MIN_NR_CONSOLES) {
-			tty_port_destroy(&vc[i]->port);
-			kfree(vc[i]);
-		}
+		if (vc[i] && i >= MIN_NR_CONSOLES)
+			tty_port_put(&vc[i]->port);
 	}
 }
 
author maintainer
#89 lore raw

PATCH 88/91 vt: vt_ioctl: fix use-after-free in vt_in_use()

In reply to Greg Kroah-Hartman

From: Eric Biggers <[email protected]>

commit 7cf64b18b0b96e751178b8d0505d8466ff5a448f upstream.

vt_in_use() dereferences console_driver->ttys[i] without proper locking. This is broken because the tty can be closed and freed concurrently.

We could fix this by using 'READ_ONCE(console_driver->ttys[i]) != NULL' and skipping the check of tty_struct::count. But, looking at console_driver->ttys[i] isn't really appropriate anyway because even if it is NULL the tty can still be in the process of being closed.

Instead, fix it by making vt_in_use() require console_lock() and check whether the vt is allocated and has port refcount > 1. This works since following the patch "vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console" the port refcount is incremented while the vt is open.

Reproducer (very unreliable, but it worked for me after a few minutes):

	#include <fcntl.h>
	#include <linux/vt.h>

	int main()
	{
		int fd, nproc;
		struct vt_stat state;
		char ttyname[16];

		fd = open("/dev/tty10", O_RDONLY);
		for (nproc = 1; nproc < 8; nproc *= 2)
			fork();
		for (;;) {
			sprintf(ttyname, "/dev/tty%d", rand() % 8);
			close(open(ttyname, O_RDONLY));
			ioctl(fd, VT_GETSTATE, &state);
		}
	}

KASAN report:

	BUG: KASAN: use-after-free in vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
	BUG: KASAN: use-after-free in vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
	Read of size 4 at addr ffff888065722468 by task syz-vt2/132

	CPU: 0 PID: 132 Comm: syz-vt2 Not tainted 5.6.0-rc5-00130-g089b6d3654916 #13
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	Call Trace:
	 [...]
	 vt_in_use drivers/tty/vt/vt_ioctl.c:48 [inline]
	 vt_ioctl+0x1ad3/0x1d70 drivers/tty/vt/vt_ioctl.c:657
	 tty_ioctl+0x9db/0x11b0 drivers/tty/tty_io.c:2660
	 [...]

	Allocated by task 136:
	 [...]
	 kzalloc include/linux/slab.h:669 [inline]
	 alloc_tty_struct+0x96/0x8a0 drivers/tty/tty_io.c:2982
	 tty_init_dev+0x23/0x350 drivers/tty/tty_io.c:1334
	 tty_open_by_driver drivers/tty/tty_io.c:1987 [inline]
	 tty_open+0x3ca/0xb30 drivers/tty/tty_io.c:2035
	 [...]

	Freed by task 41:
	 [...]
	 kfree+0xbf/0x200 mm/slab.c:3757
	 free_tty_struct+0x8d/0xb0 drivers/tty/tty_io.c:177
	 release_one_tty+0x22d/0x2f0 drivers/tty/tty_io.c:1468
	 process_one_work+0x7f1/0x14b0 kernel/workqueue.c:2264
	 worker_thread+0x8b/0xc80 kernel/workqueue.c:2410
	 [...]
Fixes 4001d7b7fc27 ("vt: push down the tty lock so we can see what is left to tackle")
Cc <[email protected]> # v3.4+
---
 drivers/tty/vt/vt_ioctl.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/tty/vt/vt_ioctl.c +12 -4
@@ -42,9 +42,15 @@ bool vt_dont_switch;
 
 static inline bool vt_in_use(unsigned int i)
 {
-	extern struct tty_driver *console_driver;
+	const struct vc_data *vc = vc_cons[i].d;
 
-	return console_driver->ttys[i] && console_driver->ttys[i]->count;
+	/*
+	 * console_lock must be held to prevent the vc from being deallocated
+	 * while we're checking whether it's in-use.
+	 */
+	WARN_CONSOLE_UNLOCKED();
+
+	return vc && kref_read(&vc->port.kref) > 1;
 }
 
 static inline bool vt_busy(int i)
@@ -646,15 +652,16 @@ int vt_ioctl(struct tty_struct *tty,
 		struct vt_stat __user *vtstat = up;
 		unsigned short state, mask;
 
-		/* Review: FIXME: Console lock ? */
 		if (put_user(fg_console + 1, &vtstat->v_active))
 			ret = -EFAULT;
 		else {
 			state = 1;	/* /dev/tty0 is always open */
+			console_lock(); /* required by vt_in_use() */
 			for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask;
 							++i, mask <<= 1)
 				if (vt_in_use(i))
 					state |= mask;
+			console_unlock();
 			ret = put_user(state, &vtstat->v_state);
 		}
 		break;
@@ -664,10 +671,11 @@ int vt_ioctl(struct tty_struct *tty,
 	 * Returns the first available (non-opened) console.
 	 */
 	case VT_OPENQRY:
-		/* FIXME: locking ? - but then this is a stupid API */
+		console_lock(); /* required by vt_in_use() */
 		for (i = 0; i < MAX_NR_CONSOLES; ++i)
 			if (!vt_in_use(i))
 				break;
+		console_unlock();
 		uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
 		goto setint;		 
 
author maintainer
#63 lore raw

PATCH 62/91 xfrm: fix uctx len check in verify_sec_ctx_len

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream.

It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later.

This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt).

Fixes df71837d5024 ("[LSM-IPSec]: Security association restriction.")
---
 net/xfrm/xfrm_user.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/xfrm/xfrm_user.c +2 -1
@@ -109,7 +109,8 @@ static inline int verify_sec_ctx_len(str
 		return 0;
 
 	uctx = nla_data(rt);
-	if (uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
+	if (uctx->len > nla_len(rt) ||
+	    uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len))
 		return -EINVAL;
 
 	return 0;
author maintainer
#90 lore raw

PATCH 89/91 bpf: Explicitly memset the bpf_attr structure

In reply to Greg Kroah-Hartman

From: Greg Kroah-Hartman <[email protected]>

commit 8096f229421f7b22433775e928d506f0342e5907 upstream.

For the bpf syscall, we are relying on the compiler to properly zero out the bpf_attr union that we copy userspace data into. Unfortunately that doesn't always work properly, padding and other oddities might not be correctly zeroed, and in some tests odd things have been found when the stack is pre-initialized to other values.

Fix this by explicitly memsetting the structure to 0 before using it.

---
 kernel/bpf/syscall.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/bpf/syscall.c +2 -1
@@ -667,7 +667,7 @@ static int bpf_obj_get(const union bpf_a
 
 SYSCALL_DEFINE3(bpf, int, cmd, union bpf_attr __user *, uattr, unsigned int, size)
 {
-	union bpf_attr attr = {};
+	union bpf_attr attr;
 	int err;
 
 	if (sysctl_unprivileged_bpf_disabled && !capable(CAP_SYS_ADMIN))
@@ -703,6 +703,7 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf
 	}
 
 	/* copy attributes from user space, may be less than sizeof(bpf_attr) */
+	memset(&attr, 0, sizeof(attr));
 	if (copy_from_user(&attr, uattr, size) != 0)
 		return -EFAULT;
 
author maintainer
#91 lore raw

PATCH 90/91 net: ks8851-ml: Fix IO operations, again

In reply to Greg Kroah-Hartman

From: Marek Vasut <[email protected]>

commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream.

This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again.

While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly.

Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware.

Fixes 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access")
Cc David S. Miller <[email protected]>
Cc Lukas Wunner <[email protected]>
Cc Petr Stetiar <[email protected]>
Cc YueHaibing <[email protected]>
---
 drivers/net/ethernet/micrel/ks8851_mll.c |   56 ++++++++++++++++++++++++++++---
 1 file changed, 52 insertions(+), 4 deletions(-)
drivers/net/ethernet/micrel/ks8851_mll.c +52 -4
@@ -475,6 +475,50 @@ static int msg_enable;
  */
 
 /**
+ * ks_check_endian - Check whether endianness of the bus is correct
+ * @ks	  : The chip information
+ *
+ * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit
+ * bus. To maintain optimum performance, the bus endianness should be set
+ * such that it matches the endianness of the CPU.
+ */
+
+static int ks_check_endian(struct ks_net *ks)
+{
+	u16 cider;
+
+	/*
+	 * Read CIDER register first, however read it the "wrong" way around.
+	 * If the endian strap on the KS8851-16MLL in incorrect and the chip
+	 * is operating in different endianness than the CPU, then the meaning
+	 * of BE[3:0] byte-enable bits is also swapped such that:
+	 *    BE[3,2,1,0] becomes BE[1,0,3,2]
+	 *
+	 * Luckily for us, the byte-enable bits are the top four MSbits of
+	 * the address register and the CIDER register is at offset 0xc0.
+	 * Hence, by reading address 0xc0c0, which is not impacted by endian
+	 * swapping, we assert either BE[3:2] or BE[1:0] while reading the
+	 * CIDER register.
+	 *
+	 * If the bus configuration is correct, reading 0xc0c0 asserts
+	 * BE[3:2] and this read returns 0x0000, because to read register
+	 * with bottom two LSbits of address set to 0, BE[1:0] must be
+	 * asserted.
+	 *
+	 * If the bus configuration is NOT correct, reading 0xc0c0 asserts
+	 * BE[1:0] and this read returns non-zero 0x8872 value.
+	 */
+	iowrite16(BE3 | BE2 | KS_CIDER, ks->hw_addr_cmd);
+	cider = ioread16(ks->hw_addr);
+	if (!cider)
+		return 0;
+
+	netdev_err(ks->netdev, "incorrect EESK endian strap setting\n");
+
+	return -EINVAL;
+}
+
+/**
  * ks_rdreg16 - read 16 bit register from device
  * @ks	  : The chip information
  * @offset: The register address
@@ -484,7 +528,7 @@ static int msg_enable;
 
 static u16 ks_rdreg16(struct ks_net *ks, int offset)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	return ioread16(ks->hw_addr);
 }
@@ -499,7 +543,7 @@ static u16 ks_rdreg16(struct ks_net *ks,
 
 static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
 {
-	ks->cmd_reg_cache = (u16)offset | ((BE3 | BE2) >> (offset & 0x02));
+	ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
 	iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
 	iowrite16(value, ks->hw_addr);
 }
@@ -515,7 +559,7 @@ static inline void ks_inblk(struct ks_ne
 {
 	len >>= 1;
 	while (len--)
-		*wptr++ = be16_to_cpu(ioread16(ks->hw_addr));
+		*wptr++ = (u16)ioread16(ks->hw_addr);
 }
 
 /**
@@ -529,7 +573,7 @@ static inline void ks_outblk(struct ks_n
 {
 	len >>= 1;
 	while (len--)
-		iowrite16(cpu_to_be16(*wptr++), ks->hw_addr);
+		iowrite16(*wptr++, ks->hw_addr);
 }
 
 static void ks_disable_int(struct ks_net *ks)
@@ -1535,6 +1579,10 @@ static int ks8851_probe(struct platform_
 		goto err_free;
 	}
 
+	err = ks_check_endian(ks);
+	if (err)
+		goto err_free;
+
 	netdev->irq = platform_get_irq(pdev, 0);
 
 	if ((int)netdev->irq < 0) {
author maintainer
#92 lore raw

PATCH 91/91 perf map: Fix off by one in strncpy() size argument

In reply to Greg Kroah-Hartman

From: disconnect3d <[email protected]>

commit db2c549407d4a76563c579e4768f7d6d32afefba upstream.

This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in:

        strncmp(filename, "/system/lib/", 11)

the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious".

This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact.

Fixes eca818369996 ("perf tools: Add automatic remapping of Android libraries")
Cc Alexander Shishkin <[email protected]>
Cc Changbin Du <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc John Keeping <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Michael Lentine <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Song Liu <[email protected]>
Cc Stephane Eranian <[email protected]>
---
 tools/perf/util/map.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/map.c +1 -1
@@ -85,7 +85,7 @@ static inline bool replace_android_lib(c
 		return true;
 	}
 
-	if (!strncmp(filename, "/system/lib/", 11)) {
+	if (!strncmp(filename, "/system/lib/", 12)) {
 		char *ndk, *app;
 		const char *arch;
 		size_t ndk_length;
author maintainer
#64 lore raw

PATCH 63/91 xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire

In reply to Greg Kroah-Hartman

From: Xin Long <[email protected]>

commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream.

Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz:

  BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430
  Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650

  Call Trace:
   dump_stack+0xe8/0x16e
   print_address_description.cold.3+0x9/0x23b
   kasan_report.cold.4+0x64/0x95
   memcpy+0x1f/0x50
   selinux_xfrm_alloc_user+0x237/0x430
   security_xfrm_policy_alloc+0x5c/0xb0
   xfrm_policy_construct+0x2b1/0x650
   xfrm_add_acquire+0x21d/0xa10
   xfrm_user_rcv_msg+0x431/0x6f0
   netlink_rcv_skb+0x15a/0x410
   xfrm_netlink_rcv+0x6d/0x90
   netlink_unicast+0x50e/0x6a0
   netlink_sendmsg+0x8ae/0xd40
   sock_sendmsg+0x133/0x170
   ___sys_sendmsg+0x834/0x9a0
   __sys_sendmsg+0x100/0x1e0
   do_syscall_64+0xe5/0x660
   entry_SYSCALL_64_after_hwframe+0x6a/0xdf

So fix it by adding the missing verify_sec_ctx_len check there.

Fixes 980ebd25794f ("[IPSEC]: Sync series - acquire insert")
---
 net/xfrm/xfrm_user.c |    3 +++
 1 file changed, 3 insertions(+)
net/xfrm/xfrm_user.c +3 -0
@@ -2175,6 +2175,9 @@ static int xfrm_add_acquire(struct sk_bu
 
 	err = verify_newpolicy_info(&ua->policy);
 	if (err)
+		goto free_state;
+	err = verify_sec_ctx_len(attrs);
+	if (err)
 		goto bad_policy;
 
 	/*   build an XP */
author maintainer
#65 lore raw

PATCH 64/91 xfrm: policy: Fix doulbe free in xfrm_policy_timer

In reply to Greg Kroah-Hartman

From: YueHaibing <[email protected]>

commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream.

After xfrm_add_policy add a policy, its ref is 2, then

                             xfrm_policy_timer
                               read_lock
                               xp->walk.dead is 0
                               ....
                               mod_timer()

xfrm_policy_kill
policy->walk.dead = 1
....
del_timer(&policy->timer)
xfrm_pol_put //ref is 1
xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu
xfrm_pol_hold //ref is 1
read_unlock xfrm_pol_put //ref is 0
xfrm_policy_destroy
call_rcu

xfrm_policy_destroy is called twice, which may leads to double free.

Call Trace:
RIP: 0010:refcount_warn_saturate+0x161/0x210
...
 xfrm_policy_timer+0x522/0x600
 call_timer_fn+0x1b3/0x5e0
 ? __xfrm_decode_session+0x2990/0x2990
 ? msleep+0xb0/0xb0
 ? _raw_spin_unlock_irq+0x24/0x40
 ? __xfrm_decode_session+0x2990/0x2990
 ? __xfrm_decode_session+0x2990/0x2990
 run_timer_softirq+0x5c5/0x10e0

Fix this by use write_lock_bh in xfrm_policy_kill.

Fixes ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead")
---
 net/xfrm/xfrm_policy.c |    2 ++
 1 file changed, 2 insertions(+)
net/xfrm/xfrm_policy.c +2 -0
@@ -330,7 +330,9 @@ EXPORT_SYMBOL(xfrm_policy_destroy);
 
 static void xfrm_policy_kill(struct xfrm_policy *policy)
 {
+	write_lock_bh(&policy->lock);
 	policy->walk.dead = 1;
+	write_unlock_bh(&policy->lock);
 
 	atomic_inc(&policy->genid);
 
author maintainer
#66 lore raw

PATCH 65/91 vti6: Fix memory leak of skb if input policy check fails

In reply to Greg Kroah-Hartman

From: Torsten Hilbrich <[email protected]>

commit 2a9de3af21aa8c31cd68b0b39330d69f8c1e59df upstream.

The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address.

In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked.

Using the same goto-label discard in this case to fix this problem.

Fixes ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
---
 net/ipv6/ip6_vti.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/ipv6/ip6_vti.c +1 -1
@@ -315,7 +315,7 @@ static int vti6_rcv(struct sk_buff *skb)
 
 		if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
 			rcu_read_unlock();
-			return 0;
+			goto discard;
 		}
 
 		if (!ip6_tnl_rcv_ctl(t, &ipv6h->daddr, &ipv6h->saddr)) {
author maintainer
#67 lore raw

PATCH 66/91 tools: Let O= makes handle a relative path with -C option

In reply to Greg Kroah-Hartman

From: Masami Hiramatsu <[email protected]>

[ Upstream commit be40920fbf1003c38ccdc02b571e01a75d890c82 ]

When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path:

  $ make O=BUILD -C tools/perf/
  make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
  ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist.  Stop.
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'

The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command.

To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs.

Fixes c883122acc0d ("perf tools: Let O= makes handle relative paths")
Cc Andrew Morton <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Geert Uytterhoeven <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Masahiro Yamada <[email protected]>
Cc Michal Marek <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Sasha Levin <[email protected]>
Cc Steven Rostedt (VMware) <[email protected]>
---
 tools/perf/Makefile            | 2 +-
 tools/scripts/Makefile.include | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)
tools/perf/Makefile +1 -1
index 55933b2eb9324..a733e9cf343a3 100644
@@ -34,7 +34,7 @@ endif
 # Only pass canonical directory names as the output directory:
 #
 ifneq ($(O),)
-  FULL_O := $(shell readlink -f $(O) || echo $(O))
+  FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O))
 endif
 
 #
tools/scripts/Makefile.include +2 -2
index 7ea4438b801dd..882c18201c7c3 100644
@@ -1,7 +1,7 @@
 ifneq ($(O),)
 ifeq ($(origin O), command line)
-	dummy := $(if $(shell test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
-	ABSOLUTE_O := $(shell cd $(O) ; pwd)
+	dummy := $(if $(shell cd $(PWD); test -d $(O) || echo $(O)),$(error O=$(O) does not exist),)
+	ABSOLUTE_O := $(shell cd $(PWD); cd $(O) ; pwd)
 	OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/)
 	COMMAND_O := O=$(ABSOLUTE_O)
 ifeq ($(objtree),)
Signature · 1 line
2.20.1
author maintainer
#68 lore raw

PATCH 67/91 USB: serial: option: add support for ASKEY WWHC050

In reply to Greg Kroah-Hartman

From: Pawel Dembicki <[email protected]>

commit 007d20dca2376a751b1dad03442f118438b7e65e upstream.

ASKEY WWHC050 is a mcie LTE modem.
The oem configuration states:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1690 ProdID=7588 Rev=ff.ff
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=813f0eef6e6e
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1983,6 +1983,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) },	/* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) },	/* D-Link DWM-156/A3 */
+	{ USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff),			/* ASKEY WWHC050 */
+	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
author maintainer
#69 lore raw

PATCH 68/91 USB: serial: option: add BroadMobi BM806U

In reply to Greg Kroah-Hartman

From: Pawel Dembicki <[email protected]>

commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream.

BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2033 Rev= 2.28
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=f842866cfd5a
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1987,6 +1987,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(1) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff),			/* Olicard 600 */
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff),			/* BroadMobi BM806U */
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff),			/* BroadMobi BM818 */
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) },			/* OLICARD300 - MT6225 */
author maintainer
#59 lore raw

PATCH 59/91 mac80211: mark station unauthorized before key removal

In reply to Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit b16798f5b907733966fd1a558fca823b3c67e4a1 upstream.

If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow.

---
 net/mac80211/sta_info.c |    6 ++++++
 1 file changed, 6 insertions(+)
net/mac80211/sta_info.c +6 -0
@@ -2,6 +2,7 @@
  * Copyright 2002-2005, Instant802 Networks, Inc.
  * Copyright 2006-2007	Jiri Benc <[email protected]>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright (C) 2018-2020 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -904,6 +905,11 @@ static void __sta_info_destroy_part2(str
 	might_sleep();
 	lockdep_assert_held(&local->sta_mtx);
 
+	while (sta->sta_state == IEEE80211_STA_AUTHORIZED) {
+		ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+		WARN_ON_ONCE(ret);
+	}
+
 	/* now keys can no longer be reached */
 	ieee80211_free_sta_keys(local, sta);
 
author maintainer
#24 lore raw

PATCH 24/91 mm, slub: prevent kmalloc_node crashes and memory leaks

In reply to Greg Kroah-Hartman

From: Vlastimil Babka <[email protected]>

commit 0715e6c516f106ed553828a671d30ad9a3431536 upstream.

Sachin reports [1] a crash in SLUB __slab_alloc():

  BUG: Kernel NULL pointer dereference on read at 0x000073b0
  Faulting instruction address: 0xc0000000003d55f4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1
  NIP:  c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000
  REGS: c0000008b37836d0 TRAP: 0300   Not tainted  (5.6.0-rc2-next-20200218-autotest)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24004844  XER: 00000000
  CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1
  GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
  GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
  GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
  GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
  GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
  GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
  GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
  GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
  NIP ___slab_alloc+0x1f4/0x760
  LR __slab_alloc+0x34/0x60
  Call Trace:
    ___slab_alloc+0x334/0x760 (unreliable)
    __slab_alloc+0x34/0x60
    __kmalloc_node+0x110/0x490
    kvmalloc_node+0x58/0x110
    mem_cgroup_css_online+0x108/0x270
    online_css+0x48/0xd0
    cgroup_apply_control_enable+0x2ec/0x4d0
    cgroup_mkdir+0x228/0x5f0
    kernfs_iop_mkdir+0x90/0xf0
    vfs_mkdir+0x110/0x230
    do_mkdirat+0xb0/0x1a0
    system_call+0x5c/0x68

This is a PowerPC platform with following NUMA topology:

available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 35247 MB
node 1 free: 30907 MB
node distances:
node 0 1

    0:  10  40
    1:  40  10

possible numa nodes: 0-31

This only happens with a mmotm patch "mm/memcontrol.c: allocate shrinker_map on appropriate NUMA node" [2] which effectively calls kmalloc_node for each possible node. SLUB however only allocates kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on node_to_mem_node to return such valid node for other nodes since commit a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node"). This is however not true in this configuration where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31, thus it contains zeroes and get_partial() ends up accessing non-allocated kmem_cache_node.

A related issue was reported by Bharata (originally by Ramachandran) [3] where a similar PowerPC configuration, but with mainline kernel without patch [2] ends up allocating large amounts of pages by kmalloc-1k kmalloc-512. This seems to have the same underlying issue with node_to_mem_node() not behaving as expected, and might probably also lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].

This patch should fix both issues by not relying on node_to_mem_node() anymore and instead simply falling back to NUMA_NO_NODE, when kmalloc_node(node) is attempted for a node that's not online, or has no usable memory. The "usable memory" condition is also changed from node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly the condition that SLUB uses to allocate kmem_cache_node structures. The check in get_partial() is removed completely, as the checks in ___slab_alloc() are now sufficient to prevent get_partial() being reached with an invalid node.

[1] https://lore.kernel.org/linux-next/[email protected]/
[2] https://lore.kernel.org/linux-mm/[email protected]/
[3] https://lore.kernel.org/linux-mm/[email protected]/
[4] https://lore.kernel.org/linux-mm/[email protected]/

Fixes a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Cc Mel Gorman <[email protected]>
Cc Michael Ellerman <[email protected]>
Cc Michal Hocko <[email protected]>
Cc Christopher Lameter <[email protected]>
Cc Joonsoo Kim <[email protected]>
Cc Pekka Enberg <[email protected]>
Cc David Rientjes <[email protected]>
Cc Kirill Tkhai <[email protected]>
Cc Vlastimil Babka <[email protected]>
Cc Nathan Lynch <[email protected]>
---
 mm/slub.c |   26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)
mm/slub.c +17 -9
@@ -1777,8 +1777,6 @@ static void *get_partial(struct kmem_cac
 
 	if (node == NUMA_NO_NODE)
 		searchnode = numa_mem_id();
-	else if (!node_present_pages(node))
-		searchnode = node_to_mem_node(node);
 
 	object = get_partial_node(s, get_node(s, searchnode), c, flags);
 	if (object || node != NUMA_NO_NODE)
@@ -2355,17 +2353,27 @@ static void *___slab_alloc(struct kmem_c
 	struct page *page;
 
 	page = c->page;
-	if (!page)
+	if (!page) {
+		/*
+		 * if the node is not online or has no normal memory, just
+		 * ignore the node constraint
+		 */
+		if (unlikely(node != NUMA_NO_NODE &&
+			     !node_state(node, N_NORMAL_MEMORY)))
+			node = NUMA_NO_NODE;
 		goto new_slab;
+	}
 redo:
 
 	if (unlikely(!node_match(page, node))) {
-		int searchnode = node;
-
-		if (node != NUMA_NO_NODE && !node_present_pages(node))
-			searchnode = node_to_mem_node(node);
-
-		if (unlikely(!node_match(page, searchnode))) {
+		/*
+		 * same as above but node_match() being false already
+		 * implies node != NUMA_NO_NODE
+		 */
+		if (!node_state(node, N_NORMAL_MEMORY)) {
+			node = NUMA_NO_NODE;
+			goto redo;
+		} else {
 			stat(s, ALLOC_NODE_MISMATCH);
 			deactivate_slab(s, page, c->freelist);
 			c->page = NULL;
author maintainer
#88 lore raw

PATCH 87/91 locking/atomic, kref: Add kref_read()

In reply to Greg Kroah-Hartman

From: Peter Zijlstra <[email protected]>

commit 2c935bc57221cc2edc787c72ea0e2d30cdcd3d5e upstream.

Since we need to change the implementation, stop exposing internals.

Provide kref_read() to read the current reference count; typically used for debug messages.

Kills two anti-patterns:

	atomic_read(&kref->refcount)
	kref->refcount.counter
Cc Andrew Morton <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Paul E. McKenney <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
[only add kref_read() to kref.h for stable backports - gregkh]
---
 include/linux/kref.h |    5 +++++
 1 file changed, 5 insertions(+)
include/linux/kref.h +5 -0
@@ -33,6 +33,11 @@ static inline void kref_init(struct kref
 	atomic_set(&kref->refcount, 1);
 }
 
+static inline int kref_read(const struct kref *kref)
+{
+	return atomic_read(&kref->refcount);
+}
+
 /**
  * kref_get - increment refcount for object.
  * @kref: object.
author maintainer
#57 lore raw

PATCH 57/91 scripts/dtc: Remove redundant YYLOC global declaration

In reply to Greg Kroah-Hartman

From: Dirk Mueller <[email protected]>

commit e33a814e772cdc36436c8c188d8c42d019fda639 upstream.

gcc 10 will default to -fno-common, which causes this error at link time:

(.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here

This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to:

dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]

   26 | extern YYLTYPE yylloc;
      |                ^~~~~~
In file included from dtc-lexer.l:24:
dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
  127 | extern YYLTYPE yylloc;
      |                ^~~~~~

cc1: all warnings being treated as errors

which means the declaration is completely redundant and can just be dropped.

---
 scripts/dtc/dtc-lexer.l |    1 -
 1 file changed, 1 deletion(-)
scripts/dtc/dtc-lexer.l +0 -1
@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
 #include "srcpos.h"
 #include "dtc-parser.tab.h"
 
-YYLTYPE yylloc;
 extern bool treesource_error;
 
 /* CAUTION: this will stop working if we ever use yyless() or yyunput() */
author maintainer
#54 lore raw

PATCH 54/91 sxgbe: Fix off by one in samsung driver strncpy size arg

In reply to Greg Kroah-Hartman

From: Dominik Czarnota <[email protected]>

[ Upstream commit f3cc008bf6d59b8d93b4190e01d3e557b0040e15 ]

This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in:

        strncmp(opt, "eee_timer:", 6)

the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:".

This bug doesn't seem to have any security impact since its present in module's cmdline parsing code.

---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +1 -1
index 413ea14ab91f7..56cdc01c58477 100644
@@ -2315,7 +2315,7 @@ static int __init sxgbe_cmdline_opt(char *str)
 	if (!str || !*str)
 		return -EINVAL;
 	while ((opt = strsep(&str, ",")) != NULL) {
-		if (!strncmp(opt, "eee_timer:", 6)) {
+		if (!strncmp(opt, "eee_timer:", 10)) {
 			if (kstrtoint(opt + 10, 0, &eee_timer))
 				goto err;
 		}
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/91 KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr

In reply to Greg Kroah-Hartman

From: Sean Christopherson <[email protected]>

[ Upstream commit c4409905cd6eb42cfd06126e9226b0150e05a715 ]

Re-execution after an emulation decode failure is only intended to handle a case where two or vCPUs race to write a shadowed page, i.e. we should never re-execute an instruction as part of MMIO emulation. As handle_ept_misconfig() is only used for MMIO emulation, it should pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid.

And because the cr2 value passed to x86_emulate_instruction() is only destined for use when retrying or reexecuting, we can simply call emulate_instruction().

Fixes d391f1207067 ("x86/kvm/vmx: do not use vm-exit instruction length

for fast MMIO when running nested")

---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx.c +2 -2
index 78daf891abec8..2634b45562026 100644
@@ -6187,8 +6187,8 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 			return 1;
 		}
 		else
-			return x86_emulate_instruction(vcpu, gpa, EMULTYPE_SKIP,
-						       NULL, 0) == EMULATE_DONE;
+			return emulate_instruction(vcpu, EMULTYPE_SKIP) ==
+								EMULATE_DONE;
 	}
 
 	ret = handle_mmio_page_fault(vcpu, gpa, true);
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/91 hsr: set .netnsok flag

In reply to Greg Kroah-Hartman

From: Taehee Yoo <[email protected]>

[ Upstream commit 09e91dbea0aa32be02d8877bd50490813de56b9a ]

The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS)
These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false.
So, there is no way to get node information in the non-init_net namespace.

Fixes f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
---
 net/hsr/hsr_netlink.c |    1 +
 1 file changed, 1 insertion(+)
net/hsr/hsr_netlink.c +1 -0
@@ -132,6 +132,7 @@ static struct genl_family hsr_genl_famil
 	.name = "HSR",
 	.version = 1,
 	.maxattr = HSR_A_MAX,
+	.netnsok = true,
 };
 
 static const struct genl_multicast_group hsr_mcgrps[] = {
author maintainer
#46 lore raw

PATCH 46/91 uapi glibc compat: fix outer guard of net device flags enum

In reply to Greg Kroah-Hartman

From: Jonas Gorski <[email protected]>

[ Upstream commit efc45154828ae4e49c6b46f59882bfef32697d44 ]

Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h.

The comment makes it clear the intention was to allow partial definition with either parts.

This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO.

Fixes 4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h")
---
 include/uapi/linux/if.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/uapi/linux/if.h +2 -2
index 752f5dc040a51..0829d6d5e917a 100644
@@ -31,7 +31,7 @@
 #include <linux/hdlc/ioctl.h>
 
 /* For glibc compatibility. An empty enum does not compile. */
-#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 && \
+#if __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || \
     __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0
 /**
  * enum net_device_flags - &struct net_device flags
@@ -99,7 +99,7 @@ enum net_device_flags {
 	IFF_ECHO			= 1<<18, /* volatile */
 #endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO */
 };
-#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 && __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */
+#endif /* __UAPI_DEF_IF_NET_DEVICE_FLAGS_LOWER_UP_DORMANT_ECHO != 0 || __UAPI_DEF_IF_NET_DEVICE_FLAGS != 0 */
 
 /* for compatibility with glibc net/if.h */
 #if __UAPI_DEF_IF_NET_DEVICE_FLAGS
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/91 vxlan: check return value of gro_cells_init()

In reply to Greg Kroah-Hartman

From: Taehee Yoo <[email protected]>

[ Upstream commit 384d91c267e621e0926062cfb3f20cb72dc16928 ]

gro_cells_init() returns error if memory allocation is failed. But the vxlan module doesn't check the return value of gro_cells_init().

Fixes 58ce31cca1ff ("vxlan: GRO support at tunnel layer")`
---
 drivers/net/vxlan.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/net/vxlan.c +9 -2
@@ -2303,10 +2303,19 @@ static void vxlan_vs_add_dev(struct vxla
 /* Setup stats when device is created */
 static int vxlan_init(struct net_device *dev)
 {
+	struct vxlan_dev *vxlan = netdev_priv(dev);
+	int err;
+
 	dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
 	if (!dev->tstats)
 		return -ENOMEM;
 
+	err = gro_cells_init(&vxlan->gro_cells, dev);
+	if (err) {
+		free_percpu(dev->tstats);
+		return err;
+	}
+
 	return 0;
 }
 
@@ -2584,8 +2593,6 @@ static void vxlan_setup(struct net_devic
 
 	vxlan->dev = dev;
 
-	gro_cells_init(&vxlan->gro_cells, dev);
-
 	for (h = 0; h < FDB_HASH_SIZE; ++h)
 		INIT_HLIST_HEAD(&vxlan->fdb_head[h]);
 }
author maintainer
#4 lore raw

PATCH 4/91 spi/zynqmp: remove entry that causes a cs glitch

In reply to Greg Kroah-Hartman

From: Thommy Jakobsson <[email protected]>

[ Upstream commit 5dd8304981ecffa77bb72b1c57c4be5dfe6cfae9 ]

In the public interface for chipselect, there is always an entry commented as "Dummy generic FIFO entry" pushed down to the fifo right after the activate/deactivate command. The dummy entry is 0x0, irregardless if the intention was to activate or deactive the cs. This causes the cs line to glitch rather than beeing activated in the case when there was an activate command.

This has been observed on oscilloscope, and have caused problems for at least one specific flash device type connected to the qspi port. After the change the glitch is gone and cs goes active when intended.

The reason why this worked before (except for the glitch) was because when sending the actual data, the CS bits are once again set. Since most flashes uses mode 0, there is always a half clk period anyway for cs to clk active setup time. If someone would rely on timing from a chip_select call to a transfer_one, it would fail though.

It is unknown why the dummy entry was there in the first place, git log seems to be of no help in this case. The reference manual gives no indication of the necessity of this. In fact the lower 8 bits are a setup (or hold in case of deactivate) time expressed in cycles. So this should not be needed to fulfill any setup/hold timings.

---
 drivers/spi/spi-zynqmp-gqspi.c | 3 ---
 1 file changed, 3 deletions(-)
drivers/spi/spi-zynqmp-gqspi.c +0 -3
index f23f36ebaf3dc..bd3945a5660a5 100644
@@ -414,9 +414,6 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
 
 	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
 
-	/* Dummy generic FIFO entry */
-	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
-
 	/* Manually start the generic FIFO command */
 	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
 			zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
Signature · 1 line
2.20.1
#93 lore raw
In reply to Greg Kroah-Hartman

Hello Greg,

Quoted 8 lines

From: [email protected] <[email protected]> On Behalf Of Greg Kroah-Hartman
Sent: 01 April 2020 17:17

This is the start of the stable review cycle for the 4.4.218 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

No build issues seen for CIP configs for Linux 4.4.218-rc1 (2d26509e19e3).

Build logs: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/pipelines/131909815
GitLab CI Pipeline: https://gitlab.com/cip-project/cip-testing/linux-cip-pipelines/-/blob/master/trees/linux-4.4.y.yml

Kind regards, Chris

Quoted 399 lines

Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-
4.4.218-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.4.218-rc1

disconnect3d <[email protected]>
perf map: Fix off by one in strncpy() size argument

Marek Vasut <[email protected]>
net: ks8851-ml: Fix IO operations, again

Greg Kroah-Hartman <[email protected]>
bpf: Explicitly memset the bpf_attr structure

Eric Biggers <[email protected]>
vt: vt_ioctl: fix use-after-free in vt_in_use()

Peter Zijlstra <[email protected]>
locking/atomic, kref: Add kref_read()

Eric Biggers <[email protected]>
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console

Eric Biggers <[email protected]>
vt: vt_ioctl: remove unnecessary console allocation checks

Jiri Slaby <[email protected]>
vt: switch vt_dont_switch to bool

Jiri Slaby <[email protected]>
vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines

Jiri Slaby <[email protected]>
vt: selection, introduce vc_is_sel

Johan Hovold <[email protected]>
media: xirlink_cit: add missing descriptor sanity checks

Johan Hovold <[email protected]>
media: stv06xx: add missing descriptor sanity checks

Johan Hovold <[email protected]>
media: dib0700: fix rc endpoint lookup

Johan Hovold <[email protected]>
media: ov519: add missing endpoint sanity checks

Eric Biggers <[email protected]>
libfs: fix infoleak in simple_attr_read()

Qiujun Huang <[email protected]>
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback

Larry Finger <[email protected]>
staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table

Johan Hovold <[email protected]>
media: usbtv: fix control-message timeouts

Johan Hovold <[email protected]>
media: flexcop-usb: fix endpoint sanity check

Mans Rullgard <[email protected]>
usb: musb: fix crash with highmen PIO and usbmon

Qiujun Huang <[email protected]>
USB: serial: io_edgeport: fix slab-out-of-bounds read in
edge_interrupt_callback

Matthias Reichl <[email protected]>
USB: cdc-acm: restore capability check order

Pawel Dembicki <[email protected]>
USB: serial: option: add Wistron Neweb D19Q1

Pawel Dembicki <[email protected]>
USB: serial: option: add BroadMobi BM806U

Pawel Dembicki <[email protected]>
USB: serial: option: add support for ASKEY WWHC050

Masami Hiramatsu <[email protected]>
tools: Let O= makes handle a relative path with -C option

Torsten Hilbrich <[email protected]>
vti6: Fix memory leak of skb if input policy check fails

YueHaibing <[email protected]>
xfrm: policy: Fix doulbe free in xfrm_policy_timer

Xin Long <[email protected]>
xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire

Xin Long <[email protected]>
xfrm: fix uctx len check in verify_sec_ctx_len

Nicolas Dichtel <[email protected]>
vti[6]: fix packet tx through bpf_redirect() in XinY cases

Edward Cree <[email protected]>
genirq: Fix reference leaks on irq affinity notifiers

Johannes Berg <[email protected]>
mac80211: mark station unauthorized before key removal

Martin K. Petersen <[email protected]>
scsi: sd: Fix optimal I/O size for devices that change reported values

Dirk Mueller <[email protected]>
scripts/dtc: Remove redundant YYLOC global declaration

Masami Hiramatsu <[email protected]>
perf probe: Do not depend on dwfl_module_addrsym()

Chuhong Yuan <[email protected]>
i2c: hix5hd2: add missed clk_disable_unprepare in remove

Dominik Czarnota <[email protected]>
sxgbe: Fix off by one in samsung driver strncpy size arg

Nicolas Cavallari <[email protected]>
mac80211: Do not send mesh HWMP PREQ if HWMP is disabled

Wen Xiong <[email protected]>
scsi: ipr: Fix softlockup when rescanning devices in petitboot

Madalin Bucur <[email protected]>
dt-bindings: net: FMan erratum A050385

Mike Gilbert <[email protected]>
cpupower: avoid multiple definition with gcc -fno-common

Sabrina Dubroca <[email protected]>
net: ipv4: don't let PMTU updates increase route MTU

Matthew Wilcox <[email protected]>
drivers/hwspinlock: use correct radix tree API

Sean Christopherson <[email protected]>
KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr

Jonas Gorski <[email protected]>
uapi glibc compat: fix outer guard of net device flags enum

Alaa Hleihel <[email protected]>
IB/ipoib: Do not warn if IPoIB debugfs doesn't exist

Eugenio Pérez <[email protected]>
vhost: Check docket sk_family instead of call getname

Taehee Yoo <[email protected]>
hsr: set .netnsok flag

Taehee Yoo <[email protected]>
hsr: add restart routine into hsr_get_node_list()

Taehee Yoo <[email protected]>
hsr: use rcu_read_lock() in hsr_get_node_{list/status}()

Taehee Yoo <[email protected]>
vxlan: check return value of gro_cells_init()

Oliver Hartkopp <[email protected]>
slcan: not call free_netdev before rtnl_unlock in slcan_open

Dan Carpenter <[email protected]>
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()

Cong Wang <[email protected]>
net_sched: keep alloc_hash updated after hash allocation

Cong Wang <[email protected]>
net_sched: cls_route: remove the right filter from hashtable

Florian Fainelli <[email protected]>
net: dsa: Fix duplicate frames flooded by learning

Taehee Yoo <[email protected]>
hsr: fix general protection fault in hsr_addr_is_self()

Lyude Paul <[email protected]>
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"

Cristian Marussi <[email protected]>
arm64: smp: fix smp_send_stop() behaviour

Kai-Heng Feng <[email protected]>
ALSA: hda/realtek: Fix pop noise on ALC225

Thomas Gleixner <[email protected]>
futex: Unbreak futex hashing

Peter Zijlstra <[email protected]>
futex: Fix inode life-time issue

Nathan Chancellor <[email protected]>
kbuild: Disable -Wpointer-to-enum-cast

Anthony Mallet <[email protected]>
USB: cdc-acm: fix rounding error in TIOCSSERIAL

Anthony Mallet <[email protected]>
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL

Joerg Roedel <[email protected]>
x86/mm: split vmalloc_sync_all()

Vlastimil Babka <[email protected]>
mm, slub: prevent kmalloc_node crashes and memory leaks

Linus Torvalds <[email protected]>
mm: slub: be more careful about the double cmpxchg of freelist

Chunguang Xu <[email protected]>
memcg: fix NULL pointer dereference in
__mem_cgroup_usage_unregister_event

Corentin Labbe <[email protected]>
rtc: max8907: add missing select REGMAP_IRQ

Alexander Shishkin <[email protected]>
intel_th: Fix user-visible error codes

Samuel Thibault <[email protected]>
staging/speakup: fix get_word non-space look-ahead

Michael Straube <[email protected]>
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2

Takashi Iwai <[email protected]>
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks

Takashi Iwai <[email protected]>
ALSA: pcm: oss: Avoid plugin buffer overflow

Takashi Iwai <[email protected]>
ALSA: seq: oss: Fix running status after receiving sysex

Takashi Iwai <[email protected]>
ALSA: seq: virmidi: Fix running status after receiving sysex

Takashi Iwai <[email protected]>
ALSA: line6: Fix endless MIDI read loop

Scott Chen <[email protected]>
USB: serial: pl2303: add device-id for HP LD381

Ran Wang <[email protected]>
usb: host: xhci-plat: add a shutdown

Daniele Palmas <[email protected]>

    USB: serial: option: add ME910G1 ECM composition 0x110b

Hans de Goede <[email protected]>
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters

Kai-Heng Feng <[email protected]>
USB: Disable LPM on WD19's Realtek Hub

Daniel Axtens <[email protected]>
altera-stapl: altera_get_note: prevent write beyond end of 'key'

Marek Szyprowski <[email protected]>
drm/exynos: dsi: fix workaround for the legacy clock name

Marek Szyprowski <[email protected]>
drm/exynos: dsi: propagate error value and silence meaningless warning

Thommy Jakobsson <[email protected]>
spi/zynqmp: remove entry that causes a cs glitch

Kishon Vijay Abraham I <[email protected]>
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes

Naveen N. Rao <[email protected]>
powerpc: Include .BTF section

Yuji Sasaki <[email protected]>
spi: qup: call spi_qup_pm_resume_runtime before suspending

-------------

Diffstat:

 .../devicetree/bindings/powerpc/fsl/fman.txt       |  7 ++
 Makefile                                           |  4 +-
 arch/arm/boot/dts/dra7.dtsi                        |  2 +
 arch/arm64/kernel/smp.c                            | 17 +++-
 arch/powerpc/kernel/vmlinux.lds.S                  |  6 ++
 arch/x86/kvm/vmx.c                                 |  4 +-
 arch/x86/mm/fault.c                                | 26 +++++-
 drivers/acpi/apei/ghes.c                           |  2 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              | 15 +---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c            | 12 +--
 drivers/hwspinlock/hwspinlock_core.c               |  2 +-
 drivers/hwtracing/intel_th/msu.c                   |  6 +-
 drivers/i2c/busses/i2c-hix5hd2.c                   |  1 +
 drivers/infiniband/ulp/ipoib/ipoib_fs.c            |  2 -
 drivers/media/usb/b2c2/flexcop-usb.c               |  6 +-
 drivers/media/usb/dvb-usb/dib0700_core.c           |  4 +-
 drivers/media/usb/gspca/ov519.c                    | 10 +++
 drivers/media/usb/gspca/stv06xx/stv06xx.c          | 19 ++++-
 drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c   |  4 +
 drivers/media/usb/gspca/xirlink_cit.c              | 18 ++++-
 drivers/media/usb/usbtv/usbtv-core.c               |  2 +-
 drivers/misc/altera-stapl/altera.c                 | 12 +--
 drivers/net/can/slcan.c                            |  3 +
 drivers/net/ethernet/micrel/ks8851_mll.c           | 56 ++++++++++++-
 drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c    |  2 +-
 drivers/net/vxlan.c                                | 11 ++-
 drivers/nfc/fdp/fdp.c                              |  5 +-
 drivers/rtc/Kconfig                                |  1 +
 drivers/scsi/ipr.c                                 |  3 +-
 drivers/scsi/ipr.h                                 |  1 +
 drivers/scsi/sd.c                                  |  4 +-
 drivers/spi/spi-qup.c                              |  5 ++
 drivers/spi/spi-zynqmp-gqspi.c                     |  3 -
 drivers/staging/rtl8188eu/os_dep/usb_intf.c        |  2 +
 drivers/staging/speakup/main.c                     |  3 +-
 drivers/staging/wlan-ng/hfa384x_usb.c              |  2 +
 drivers/tty/vt/selection.c                         |  5 ++
 drivers/tty/vt/vt.c                                | 30 ++++++-
 drivers/tty/vt/vt_ioctl.c                          | 80 ++++++++++---------
 drivers/usb/class/cdc-acm.c                        | 20 +++--
 drivers/usb/core/quirks.c                          |  6 ++
 drivers/usb/host/xhci-plat.c                       |  1 +
 drivers/usb/musb/musb_host.c                       | 17 ++--
 drivers/usb/serial/io_edgeport.c                   |  2 +-
 drivers/usb/serial/option.c                        |  8 ++
 drivers/usb/serial/pl2303.c                        |  1 +
 drivers/usb/serial/pl2303.h                        |  1 +
 drivers/vhost/net.c                                | 13 +--
 fs/inode.c                                         |  1 +
 fs/libfs.c                                         |  8 +-
 include/linux/fs.h                                 |  1 +
 include/linux/futex.h                              | 17 ++--
 include/linux/kref.h                               |  5 ++
 include/linux/selection.h                          |  4 +-
 include/linux/vmalloc.h                            |  5 +-
 include/linux/vt_kern.h                            |  2 +-
 include/uapi/linux/if.h                            |  4 +-
 kernel/bpf/syscall.c                               |  3 +-
 kernel/futex.c                                     | 93 +++++++++++++---------
 kernel/irq/manage.c                                | 11 ++-
 kernel/notifier.c                                  |  2 +-
 mm/memcontrol.c                                    | 10 ++-
 mm/nommu.c                                         | 10 ++-
 mm/slub.c                                          | 32 +++++---
 mm/vmalloc.c                                       | 11 ++-
 net/dsa/tag_brcm.c                                 |  2 +
 net/hsr/hsr_framereg.c                             | 10 +--
 net/hsr/hsr_netlink.c                              | 74 +++++++++--------
 net/hsr/hsr_slave.c                                |  8 +-
 net/ipv4/Kconfig                                   |  1 +
 net/ipv4/ip_vti.c                                  | 38 +++++++--
 net/ipv4/route.c                                   |  7 +-
 net/ipv6/ip6_vti.c                                 | 34 ++++++--
 net/mac80211/mesh_hwmp.c                           |  3 +-
 net/mac80211/sta_info.c                            |  6 ++
 net/sched/cls_route.c                              |  4 +-
 net/sched/cls_tcindex.c                            |  1 +
 net/xfrm/xfrm_policy.c                             |  2 +
 net/xfrm/xfrm_user.c                               |  6 +-
 scripts/Makefile.extrawarn                         |  1 +
 scripts/dtc/dtc-lexer.l                            |  1 -
 sound/core/oss/pcm_plugin.c                        | 12 ++-
 sound/core/seq/oss/seq_oss_midi.c                  |  1 +
 sound/core/seq/seq_virmidi.c                       |  1 +
 sound/pci/hda/patch_realtek.c                      |  2 +
 sound/usb/line6/driver.c                           |  2 +-
 sound/usb/line6/midibuf.c                          |  2 +-
 tools/perf/Makefile                                |  2 +-
 tools/perf/util/map.c                              |  2 +-
 tools/perf/util/probe-finder.c                     | 11 ++-
 .../cpupower/utils/idle_monitor/amd_fam14h_idle.c  |  2 +-
 .../cpupower/utils/idle_monitor/cpuidle_sysfs.c    |  2 +-
 .../cpupower/utils/idle_monitor/cpupower-monitor.c |  2 +
 .../cpupower/utils/idle_monitor/cpupower-monitor.h |  2 +-
 tools/scripts/Makefile.include                     |  4 +-
 95 files changed, 632 insertions(+), 298 deletions(-)
#94 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.218 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000. Anything received after that time might be too late.

Build results:

	total: 169 pass: 169 fail: 0
Qemu test results:
	total: 335 pass: 335 fail: 0

Guenter

maintainer
#95 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.218 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.218-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.4:

    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    19 tests:	19 pass, 0 fail

Linux version: 4.4.218-rc1-g2d26509e19e3
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
#96 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.4.218 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Fri, 03 Apr 2020 16:09:36 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.218-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.218-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 2d26509e19e30e927f01e298d1ce71dadc5ec33a
git describe: v4.4.217-92-g2d26509e19e3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.217-92-g2d26509e19e3

No regressions (compared to build v4.4.217)

No fixes (compared to build v4.4.217)

Ran 25708 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* ltp-cpuhotplug-tests
* spectre-meltdown-checker-test
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-native

Summary
------------------------------------------------------------------------

kernel: 4.4.218-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.218-rc1-hikey-20200401-681
git commit: 8cfe8e5827549778e493ffadf6ed59a020a03830
git describe: 4.4.218-rc1-hikey-20200401-681
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.218-rc1-hikey-20200401-681

No regressions (compared to build 4.4.218-rc1-hikey-20200331-679)

No fixes (compared to build 4.4.218-rc1-hikey-20200331-679)

Ran 1355 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#60 lore raw

Re: [PATCH 4.4 59/91] mac80211: mark station unauthorized before key removal

In reply to Greg Kroah-Hartman
Quoted 29 lines · Greg Kroah-Hartman

From: Johannes Berg <[email protected]>

commit b16798f5b907733966fd1a558fca823b3c67e4a1 upstream.

If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow.

---
 net/mac80211/sta_info.c |    6 ++++++
 1 file changed, 6 insertions(+)
net/mac80211/sta_info.c +1 -0
@@ -2,6 +2,7 @@
  * Copyright 2002-2005, Instant802 Networks, Inc.
  * Copyright 2006-2007	Jiri Benc <[email protected]>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright (C) 2018-2020 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

net/mac80211/sta_info.c static void __sta_info_destroy_part2(str · line 908

Quoted 4 lines
net/mac80211/sta_info.c +1 -0
@@ -904,6 +905,11 @@ static void __sta_info_destroy_part2(str
 	might_sleep();
 	lockdep_assert_held(&local->sta_mtx);
 
+	while (sta->sta_state == IEEE80211_STA_AUTHORIZED) {

So this should be retried forever? Surely not.

Ben.

Quoted 7 lines
net/mac80211/sta_info.c +4 -0
+		ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+		WARN_ON_ONCE(ret);
+	}
+
 	/* now keys can no longer be reached */
 	ieee80211_free_sta_keys(local, sta);
 
Signature · 3 lines
Ben Hutchings, Software Developer                         Codethink Ltd
https://www.codethink.co.uk/                 Dale House, 35 Dale Street
                                     Manchester, M1 2HF, United Kingdom