Skip to contentSkip to conversation

net: qualcomm: rmnet: Allow configuration updates to existing devices

PATCH New Subash Abhinov Kasiviswanathan 1 participant 1 message Apr 1, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 net: qualcomm: rmnet: Allow configuration updates to existing devices

This allows the changelink operation to succeed if the mux_id was specified as an argument. Note that the mux_id must match the existing mux_id of the rmnet device or should be an unused mux_id.

Fixes 1dc49e9d164c ("net: rmnet: do not allow to change mux id if mux id is duplicated")
Reported-and-tested-by Alex Elder <[email protected]>

---
v1->v2: Get the endpoint within the mux check as mentioned by Alex.

---
 .../ethernet/qualcomm/rmnet/rmnet_config.c    | 31 ++++++++++++-------
 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c +19 -12
index 1305522f72d6..40efe60eff8d 100644
@@ -282,7 +282,6 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
 {
 	struct rmnet_priv *priv = netdev_priv(dev);
 	struct net_device *real_dev;
-	struct rmnet_endpoint *ep;
 	struct rmnet_port *port;
 	u16 mux_id;
 
@@ -297,19 +296,27 @@ static int rmnet_changelink(struct net_device *dev, struct nlattr *tb[],
 
 	if (data[IFLA_RMNET_MUX_ID]) {
 		mux_id = nla_get_u16(data[IFLA_RMNET_MUX_ID]);
-		if (rmnet_get_endpoint(port, mux_id)) {
-			NL_SET_ERR_MSG_MOD(extack, "MUX ID already exists");
-			return -EINVAL;
-		}
-		ep = rmnet_get_endpoint(port, priv->mux_id);
-		if (!ep)
-			return -ENODEV;
 
-		hlist_del_init_rcu(&ep->hlnode);
-		hlist_add_head_rcu(&ep->hlnode, &port->muxed_ep[mux_id]);
+		if (mux_id != priv->mux_id) {
+			struct rmnet_endpoint *ep;
+
+			ep = rmnet_get_endpoint(port, priv->mux_id);
+			if (!ep)
+				return -ENODEV;
 
-		ep->mux_id = mux_id;
-		priv->mux_id = mux_id;
+			if (rmnet_get_endpoint(port, mux_id)) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "MUX ID already exists");
+				return -EINVAL;
+			}
+
+			hlist_del_init_rcu(&ep->hlnode);
+			hlist_add_head_rcu(&ep->hlnode,
+					   &port->muxed_ep[mux_id]);
+
+			ep->mux_id = mux_id;
+			priv->mux_id = mux_id;
+		}
 	}
 
 	if (data[IFLA_RMNET_FLAGS]) {
Signature · 1 line
2.26.0