ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
Subsystems (2)
PATCH 1/1 ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
The card-detect GPIO and any other GPIO access currently doesn't work in U-Boot SPL on any STM32 platform and crashes the SPL. To work around this problem on AV96 right before release, remove the cd-gpios from DT. This patch must be reverted right after release, once the proper fix for the GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.
---
NOTE: I think it's OK if Tom picks this one directly to reduce load on
the ST people, since this is isolated to a single board.
--- arch/arm/dts/stm32mp157a-avenger96.dts | 1 - 1 file changed, 1 deletion(-)
arch/arm/dts/stm32mp157a-avenger96.dts +0 -1
@@ -353,7 +353,6 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; - cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>; disable-wp; st,sig-dir; st,neg-edge;
Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
Quoted 7 lines · Marek Vasut
The card-detect GPIO and any other GPIO access currently doesn't work in U-Boot SPL on any STM32 platform and crashes the SPL. To work around this problem on AV96 right before release, remove the cd-gpios from DT. This patch must be reverted right after release, once the proper fix for the GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.
Signed-off-by Marek Vasut <[email protected]>
Thanks,
Mani
Quoted 26 lines
Cc Manivannan Sadhasivam <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Patrice Chotard <[email protected]>Cc Tom Rini <[email protected]>---
NOTE: I think it's OK if Tom picks this one directly to reduce load on
the ST people, since this is isolated to a single board.--- arch/arm/dts/stm32mp157a-avenger96.dts | 1 - 1 file changed, 1 deletion(-)arch/arm/dts/stm32mp157a-avenger96.dts +0
-1@@ -353,7 +353,6 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>; - cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>; disable-wp; st,sig-dir; st,neg-edge;Signature · 1 line
2.25.1
PATCH 1/1 ARM: dts: stm32: Temporarily drop cd-gpios from AV96 DT
In reply to Marek VasutQuoted 6 lines · Marek Vasut
The card-detect GPIO and any other GPIO access currently doesn't work in U-Boot SPL on any STM32 platform and crashes the SPL. To work around this problem on AV96 right before release, remove the cd-gpios from DT. This patch must be reverted right after release, once the proper fix for the GPIO driver, "gpio: stm32: support gpio ops in SPL", is applied.
Quoted 6 lines
Signed-off-by Marek Vasut <[email protected]>Cc Manivannan Sadhasivam <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Patrice Chotard <[email protected]>Cc Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200406/38828296/attachment.sig>