build: meson make experimental tag as global
Subsystems (8)
PATCH v2 1/2 build: meson make experimental tag as global
From: Pavan Nikhilesh <[email protected]>
Meson make allow_experimental_api global across lib, drivers and apps.
---
Based on discussion at
http://mails.dpdk.org/archives/dev/2020-April/161527.html
v2 Changes:
- Remove comments containing experimental API list.
app/meson.build | 6 +----- app/test-bbdev/meson.build | 1 - app/test-compress-perf/meson.build | 1 - app/test-crypto-perf/meson.build | 1 - app/test-fib/meson.build | 1 - app/test-pmd/meson.build | 1 - app/test-sad/meson.build | 1 - drivers/baseband/fpga_lte_fec/meson.build | 1 - drivers/baseband/null/meson.build | 1 - drivers/baseband/turbo_sw/meson.build | 1 - drivers/bus/dpaa/meson.build | 2 -- drivers/bus/fslmc/meson.build | 2 -- drivers/bus/ifpga/meson.build | 2 -- drivers/bus/pci/meson.build | 3 --- drivers/bus/vdev/meson.build | 2 -- drivers/bus/vmbus/meson.build | 2 -- drivers/common/cpt/meson.build | 1 - drivers/common/dpaax/meson.build | 2 -- drivers/common/iavf/meson.build | 2 -- drivers/common/mlx5/meson.build | 1 - drivers/common/octeontx2/meson.build | 2 -- drivers/compress/isal/meson.build | 2 -- drivers/compress/octeontx/meson.build | 1 - drivers/compress/qat/meson.build | 1 - drivers/compress/zlib/meson.build | 2 -- drivers/crypto/aesni_gcm/meson.build | 1 - drivers/crypto/aesni_mb/meson.build | 1 - drivers/crypto/armv8/meson.build | 1 - drivers/crypto/caam_jr/meson.build | 2 -- drivers/crypto/dpaa2_sec/meson.build | 2 -- drivers/crypto/dpaa_sec/meson.build | 2 -- drivers/crypto/kasumi/meson.build | 1 - drivers/crypto/nitrox/meson.build | 1 - drivers/crypto/octeontx/meson.build | 1 - drivers/crypto/octeontx2/meson.build | 1 - drivers/crypto/openssl/meson.build | 1 - drivers/crypto/snow3g/meson.build | 1 - drivers/crypto/zuc/meson.build | 1 - drivers/event/dpaa/meson.build | 1 - drivers/event/dpaa2/meson.build | 1 - drivers/event/dsw/meson.build | 3 --- drivers/event/octeontx2/meson.build | 2 -- drivers/event/opdl/meson.build | 1 - drivers/mempool/bucket/meson.build | 2 -- drivers/mempool/dpaa/meson.build | 3 --- drivers/mempool/dpaa2/meson.build | 3 --- drivers/mempool/octeontx/meson.build | 2 -- drivers/mempool/octeontx2/meson.build | 2 -- drivers/mempool/stack/meson.build | 2 -- drivers/meson.build | 6 +----- drivers/net/atlantic/meson.build | 2 -- drivers/net/avp/meson.build | 1 - drivers/net/axgbe/meson.build | 2 -- drivers/net/bnx2x/meson.build | 1 - drivers/net/bonding/meson.build | 1 - drivers/net/dpaa/meson.build | 2 -- drivers/net/dpaa2/meson.build | 3 --- drivers/net/e1000/base/meson.build | 4 +--- drivers/net/e1000/meson.build | 2 -- drivers/net/ena/meson.build | 1 - drivers/net/enetc/meson.build | 1 - drivers/net/failsafe/meson.build | 2 -- drivers/net/fm10k/base/meson.build | 4 +--- drivers/net/fm10k/meson.build | 2 -- drivers/net/hinic/base/meson.build | 2 +- drivers/net/hinic/meson.build | 2 +- drivers/net/hns3/meson.build | 7 ------- drivers/net/i40e/base/meson.build | 4 +--- drivers/net/iavf/meson.build | 2 -- drivers/net/ice/meson.build | 2 -- drivers/net/ipn3ke/meson.build | 2 -- drivers/net/ixgbe/base/meson.build | 4 +--- drivers/net/ixgbe/meson.build | 2 -- drivers/net/memif/meson.build | 8 -------- drivers/net/mlx4/meson.build | 1 - drivers/net/mlx5/meson.build | 1 - drivers/net/netvsc/meson.build | 2 -- drivers/net/nfp/meson.build | 2 -- drivers/net/octeontx/base/meson.build | 4 +--- drivers/net/octeontx/meson.build | 2 -- drivers/net/pfe/meson.build | 5 ----- drivers/net/qede/base/meson.build | 4 +--- drivers/net/qede/meson.build | 2 -- drivers/net/sfc/base/meson.build | 4 +--- drivers/net/sfc/meson.build | 2 -- drivers/net/softnic/meson.build | 1 - drivers/net/tap/meson.build | 1 - drivers/net/thunderx/base/meson.build | 4 +--- drivers/net/thunderx/meson.build | 1 - drivers/net/vdev_netvsc/meson.build | 2 -- drivers/net/virtio/meson.build | 1 - drivers/net/vmxnet3/meson.build | 1 - drivers/raw/dpaa2_cmdif/meson.build | 2 -- drivers/raw/dpaa2_qdma/meson.build | 2 -- drivers/raw/ifpga/meson.build | 2 -- drivers/raw/ntb/meson.build | 1 - drivers/vdpa/ifc/meson.build | 1 - drivers/vdpa/mlx5/meson.build | 1 - lib/librte_bbdev/meson.build | 1 - lib/librte_bpf/meson.build | 1 - lib/librte_cmdline/meson.build | 1 - lib/librte_compressdev/meson.build | 1 - lib/librte_cryptodev/meson.build | 1 - lib/librte_eal/meson.build | 1 - lib/librte_ethdev/meson.build | 1 - lib/librte_eventdev/meson.build | 2 -- lib/librte_fib/meson.build | 1 - lib/librte_flow_classify/meson.build | 1 - lib/librte_gso/meson.build | 2 +- lib/librte_hash/meson.build | 3 --- lib/librte_ipsec/meson.build | 2 -- lib/librte_mbuf/meson.build | 2 -- lib/librte_mempool/meson.build | 3 --- lib/librte_net/meson.build | 1 - lib/librte_pdump/meson.build | 1 - lib/librte_pipeline/meson.build | 1 - lib/librte_rcu/meson.build | 2 -- lib/librte_rib/meson.build | 1 - lib/librte_ring/meson.build | 3 --- lib/librte_stack/meson.build | 2 -- lib/librte_telemetry/meson.build | 1 - lib/librte_timer/meson.build | 1 - lib/librte_vhost/meson.build | 1 - lib/meson.build | 5 +---- 124 files changed, 14 insertions(+), 226 deletions(-)
app/meson.build +1 -5
@@ -26,7 +26,6 @@ default_cflags = machine_args foreach app:apps build = true name = app - allow_experimental_apis = false sources = [] includes = [] cflags = default_cflags
@@ -53,10 +52,7 @@ foreach app:apps link_libs = dpdk_static_libraries + dpdk_drivers endif - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - + cflags += '-DALLOW_EXPERIMENTAL_API' executable('dpdk-' + name, sources, c_args: cflags,
app/test-bbdev/meson.build +0 -1
@@ -5,7 +5,6 @@ sources = files('main.c', 'test_bbdev.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') -allow_experimental_apis = true deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') deps += ['pmd_bbdev_fpga_lte_fec']
app/test-compress-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('comp_perf_options_parse.c', 'main.c', 'comp_perf_test_verify.c',
app/test-crypto-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('cperf_ops.c', 'cperf_options_parsing.c', 'cperf_test_common.c',
app/test-fib/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['fib', 'lpm', 'net']
app/test-pmd/meson.build +0 -1
@@ -3,7 +3,6 @@ # override default name to drop the hyphen name = 'testpmd' -allow_experimental_apis = true cflags += '-Wno-deprecated-declarations' sources = files('cmdline.c', 'cmdline_flow.c',
app/test-sad/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['ipsec', 'net']
drivers/baseband/fpga_lte_fec/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2019 Intel Corporation deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci'] -allow_experimental_apis = true sources = files('fpga_lte_fec.c')
drivers/baseband/null/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2018 Luca Boccassi <[email protected]> deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_null.c')
drivers/baseband/turbo_sw/meson.build +0 -1
@@ -36,5 +36,4 @@ if dpdk_conf.has('RTE_BBDEV_SDK_AVX512') endif deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_turbo_software.c')
drivers/bus/dpaa/meson.build +0 -2
@@ -19,8 +19,6 @@ sources = files('base/fman/fman.c', 'base/qbman/qman_driver.c', 'dpaa_bus.c') -allow_experimental_apis = true - if cc.has_argument('-Wno-cast-qual') cflags += '-Wno-cast-qual' endif
drivers/bus/fslmc/meson.build +0 -2
@@ -22,6 +22,4 @@ sources = files('fslmc_bus.c', 'qbman/qbman_portal.c', 'qbman/qbman_debug.c') -allow_experimental_apis = true - includes += include_directories('mc', 'qbman/include', 'portal')
drivers/bus/ifpga/meson.build +0 -2
@@ -4,5 +4,3 @@ deps += ['pci', 'kvargs', 'rawdev'] install_headers('rte_bus_ifpga.h') sources = files('ifpga_common.c', 'ifpga_bus.c') - -allow_experimental_apis = true
drivers/bus/pci/meson.build +0 -3
@@ -16,7 +16,4 @@ else includes += include_directories('bsd') endif -# memseg walk is not part of stable API yet -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vdev/meson.build +0 -2
@@ -5,6 +5,4 @@ sources = files('vdev.c', 'vdev_params.c') install_headers('rte_bus_vdev.h') -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vmbus/meson.build +0 -2
@@ -1,7 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause -allow_experimental_apis = true - install_headers('rte_bus_vmbus.h','rte_vmbus_reg.h') sources = files('vmbus_common.c',
drivers/common/cpt/meson.build +0 -1
@@ -6,4 +6,3 @@ sources = files('cpt_fpm_tables.c', deps = ['kvargs', 'pci', 'cryptodev'] includes += include_directories('../../crypto/octeontx') -allow_experimental_apis = true
drivers/common/dpaax/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 NXP -allow_experimental_apis = true - if not is_linux build = false reason = 'only supported on linux'
drivers/common/iavf/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('iavf_adminq.c', 'iavf_common.c', 'iavf_impl.c') if cc.has_argument('-Wno-pointer-to-int-cast')
drivers/common/mlx5/meson.build +0 -1
@@ -49,7 +49,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true deps += ['hash', 'pci', 'net', 'eal', 'kvargs'] sources = files( 'mlx5_devx_cmds.c',
drivers/common/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources= files('otx2_dev.c', 'otx2_irq.c', 'otx2_mbox.c',
drivers/compress/isal/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('isal_compress_pmd.c', 'isal_compress_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/compress/octeontx/meson.build +0 -1
@@ -3,7 +3,6 @@ name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') -allow_experimental_apis = true includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] ext_deps += dep
drivers/compress/qat/meson.build +0 -1
@@ -3,7 +3,6 @@ # Add our sources files to the list -allow_experimental_apis = true qat_sources += files('qat_comp_pmd.c', 'qat_comp.c') qat_includes += include_directories('.')
drivers/compress/zlib/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('zlib_pmd.c', 'zlib_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/crypto/aesni_gcm/meson.build +0 -1
@@ -20,6 +20,5 @@ else endif endif -allow_experimental_apis = true sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/aesni_mb/meson.build +0 -1
@@ -22,5 +22,4 @@ else endif sources = files('rte_aesni_mb_pmd.c', 'rte_aesni_mb_pmd_ops.c') -allow_experimental_apis = true deps += ['bus_vdev']
drivers/crypto/armv8/meson.build +0 -1
@@ -22,4 +22,3 @@ endif deps += ['bus_vdev'] sources = files('rte_armv8_pmd.c', 'rte_armv8_pmd_ops.c') -allow_experimental_apis = true
drivers/crypto/caam_jr/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('caam_jr_capabilities.c', 'caam_jr_uio.c', 'caam_jr.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include/') includes += include_directories('../../common/dpaax/') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/dpaa2_sec/meson.build +0 -2
@@ -10,6 +10,4 @@ deps += ['security', 'mempool_dpaa2'] sources = files('dpaa2_sec_dpseci.c', 'mc/dpseci.c') -allow_experimental_apis = true - includes += include_directories('mc', '../../common/dpaax', '../../common/dpaax/caamflib')
drivers/crypto/dpaa_sec/meson.build +0 -2
@@ -9,8 +9,6 @@ endif deps += ['bus_dpaa', 'mempool_dpaa', 'security'] sources = files('dpaa_sec.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include') includes += include_directories('../../common/dpaax') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/kasumi/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_kasumi_pmd.c', 'rte_kasumi_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/nitrox/meson.build +0 -1
@@ -7,7 +7,6 @@ if not is_linux endif deps += ['bus_pci'] -allow_experimental_apis = true sources = files( 'nitrox_device.c', 'nitrox_hal.c',
drivers/crypto/octeontx/meson.build +0 -1
@@ -9,7 +9,6 @@ deps += ['bus_pci'] deps += ['common_cpt'] name = 'octeontx_crypto' -allow_experimental_apis = true sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', 'otx_cryptodev_hw_access.c',
drivers/crypto/octeontx2/meson.build +0 -1
@@ -12,7 +12,6 @@ deps += ['ethdev'] deps += ['security'] name = 'octeontx2_crypto' -allow_experimental_apis = true sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', 'otx2_cryptodev_hw_access.c',
drivers/crypto/openssl/meson.build +0 -1
@@ -6,7 +6,6 @@ if not dep.found() build = false reason = 'missing dependency, "libcrypto"' endif -allow_experimental_apis = true deps += 'bus_vdev' sources = files('rte_openssl_pmd.c', 'rte_openssl_pmd_ops.c') ext_deps += dep
drivers/crypto/snow3g/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_snow3g_pmd.c', 'rte_snow3g_pmd_ops.c') deps += ['bus_vdev', 'cryptodev']
drivers/crypto/zuc/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_zuc_pmd.c', 'rte_zuc_pmd_ops.c') deps += ['bus_vdev']
drivers/event/dpaa/meson.build +0 -1
@@ -8,5 +8,4 @@ endif deps += ['pmd_dpaa', 'pmd_dpaa_sec'] sources = files('dpaa_eventdev.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa_sec/')
drivers/event/dpaa2/meson.build +0 -1
@@ -10,5 +10,4 @@ sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa2_sec/')
drivers/event/dsw/meson.build +0 -3
@@ -6,6 +6,3 @@ if cc.has_argument('-Wno-format-nonliteral') cflags += '-Wno-format-nonliteral' endif sources = files('dsw_evdev.c', 'dsw_event.c', 'dsw_xstats.c') - -# Depends on rte_ring_elem_*() -allow_experimental_apis = true
drivers/event/octeontx2/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('otx2_worker.c', 'otx2_tim_worker.c' ) -allow_experimental_apis = true - extra_flags = [] # This integrated controller runs only on a arm64 machine, remove 32bit warnings if not dpdk_conf.get('RTE_ARCH_64')
drivers/event/opdl/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources = files( 'opdl_evdev.c', 'opdl_evdev_init.c',
drivers/mempool/bucket/meson.build +0 -2
@@ -6,6 +6,4 @@ # This software was jointly developed between OKTET Labs (under contract # for Solarflare) and Solarflare Communications, Inc. -allow_experimental_apis = true - sources = files('rte_mempool_bucket.c')
drivers/mempool/dpaa/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_dpaa'] sources = files('dpaa_mempool.c') - -# depends on dpaa bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/dpaa2/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_fslmc'] sources = files('dpaa2_hw_mempool.c') - -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/octeontx/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Cavium, Inc -allow_experimental_apis = true - sources = files('octeontx_fpavf.c', 'rte_mempool_octeontx.c' )
drivers/mempool/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources = files('otx2_mempool_ops.c', 'otx2_mempool.c', 'otx2_mempool_irq.c',
drivers/mempool/stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_mempool_stack.c') deps += ['stack']
drivers/meson.build +1 -5
@@ -44,7 +44,6 @@ foreach class:dpdk_driver_classes reason = '<unknown reason>' # set if build == false to explain name = drv fmt_name = '' - allow_experimental_apis = false sources = [] objs = [] cflags = default_cflags
@@ -106,10 +105,7 @@ foreach class:dpdk_driver_classes dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) lib_name = driver_name_fmt.format(fmt_name) - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - + cflags += '-DALLOW_EXPERIMENTAL_API' dpdk_extra_ldflags += pkgconfig_extra_libs # generate pmdinfo sources by building a temporary
drivers/net/atlantic/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Aquantia Corporation -allow_experimental_apis = true - sources = files( 'atl_rxtx.c', 'atl_ethdev.c',
drivers/net/avp/meson.build +0 -1
@@ -5,6 +5,5 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true sources = files('avp_ethdev.c') install_headers('rte_avp_common.h', 'rte_avp_fifo.h')
drivers/net/axgbe/meson.build +0 -2
@@ -6,8 +6,6 @@ if not is_linux reason = 'only supported on linux' endif -allow_experimental_apis = true - sources = files('axgbe_ethdev.c', 'axgbe_dev.c', 'axgbe_mdio.c',
drivers/net/bnx2x/meson.build +0 -1
@@ -5,7 +5,6 @@ dep = dependency('zlib', required: false) build = dep.found() reason = 'missing dependency, "zlib"' ext_deps += dep -allow_experimental_apis = true cflags += '-DZLIB_CONST' sources = files('bnx2x.c', 'bnx2x_ethdev.c',
drivers/net/bonding/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'bond' #, james bond :-) -allow_experimental_apis = true sources = files('rte_eth_bond_api.c', 'rte_eth_bond_pmd.c', 'rte_eth_bond_flow.c', 'rte_eth_bond_args.c', 'rte_eth_bond_8023ad.c', 'rte_eth_bond_alb.c')
drivers/net/dpaa/meson.build +0 -2
@@ -14,6 +14,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -allow_experimental_apis = true - install_headers('rte_pmd_dpaa.h')
drivers/net/dpaa2/meson.build +0 -3
@@ -24,7 +24,4 @@ endif includes += include_directories('base', 'mc') -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2.h')
drivers/net/e1000/base/meson.build +1 -3
@@ -25,9 +25,7 @@ error_cflags = ['-Wno-uninitialized', '-Wno-unused-parameter', '-Wno-unused-variable', '-Wno-misleading-indentation', '-Wno-implicit-fallthrough'] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/e1000/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ena/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('ena_ethdev.c', 'base/ena_com.c', 'base/ena_eth_com.c')
drivers/net/enetc/meson.build +0 -1
@@ -11,4 +11,3 @@ sources = files('enetc_ethdev.c', 'enetc_rxtx.c') includes += include_directories('base') -allow_experimental_apis = true
drivers/net/failsafe/meson.build +0 -2
@@ -11,8 +11,6 @@ else cflags += '-DBSD' endif -allow_experimental_apis = true - sources = files('failsafe_args.c', 'failsafe.c', 'failsafe_eal.c',
drivers/net/fm10k/base/meson.build +1 -3
@@ -16,9 +16,7 @@ error_cflags = ['-Wno-unused-parameter', '-Wno-unused-value', '-Wno-implicit-fallthrough' ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/fm10k/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/hinic/base/meson.build +1 -1
@@ -12,7 +12,7 @@ sources = [ 'hinic_pmd_niccfg.c', 'hinic_pmd_nicio.c', 'hinic_pmd_wq.c', - 'hinic_pmd_mbox.c', + 'hinic_pmd_mbox.c', ] extra_flags = []
drivers/net/hinic/meson.build +1 -1
@@ -8,7 +8,7 @@ sources = files( 'hinic_pmd_ethdev.c', 'hinic_pmd_rx.c', 'hinic_pmd_tx.c', - 'hinic_pmd_flow.c', + 'hinic_pmd_flow.c', ) includes += include_directories('base')
drivers/net/hns3/meson.build +0 -7
@@ -27,11 +27,4 @@ sources = files('hns3_cmd.c', 'hns3_stats.c', 'hns3_mp.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_mp_action_register -# - rte_mp_action_unregister -# - rte_mp_reply -# - rte_mp_request_sync - deps += ['hash']
drivers/net/i40e/base/meson.build +1 -3
@@ -18,9 +18,7 @@ error_cflags = ['-Wno-sign-compare', '-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/iavf/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-Wno-strict-aliasing'] -allow_experimental_apis = true - includes += include_directories('../../common/iavf') deps += ['common_iavf']
drivers/net/ice/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ipn3ke/meson.build +0 -2
@@ -19,8 +19,6 @@ if not dep.found() subdir_done() endif -allow_experimental_apis = true - includes += include_directories('../../raw/ifpga') sources += files('ipn3ke_ethdev.c',
drivers/net/ixgbe/base/meson.build +1 -3
@@ -22,9 +22,7 @@ error_cflags = ['-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/ixgbe/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/memif/meson.build +0 -8
@@ -9,12 +9,4 @@ endif sources = files('rte_eth_memif.c', 'memif_socket.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments - deps += ['hash']
drivers/net/mlx4/meson.build +0 -1
@@ -50,7 +50,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true sources = files( 'mlx4.c', 'mlx4_ethdev.c',
drivers/net/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux subdir_done() endif -allow_experimental_apis = true deps += ['hash', 'common_mlx5'] sources = files( 'mlx5.c',
drivers/net/netvsc/meson.build +0 -2
@@ -6,5 +6,3 @@ reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') deps += ['bus_vmbus' ] - -allow_experimental_apis = true
drivers/net/nfp/meson.build +0 -2
@@ -18,5 +18,3 @@ sources = files('nfpcore/nfp_cpp_pcie_ops.c', 'nfpcore/nfp_nsp_eth.c', 'nfpcore/nfp_hwinfo.c', 'nfp_net.c') - -allow_experimental_apis = true
drivers/net/octeontx/base/meson.build +1 -3
@@ -14,9 +14,7 @@ foreach d: depends endforeach c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' base_lib = static_library('octeontx_base', sources, c_args: c_args, dependencies: static_objs,
drivers/net/octeontx/meson.build +0 -2
@@ -8,8 +8,6 @@ sources = files('octeontx_rxtx.c', 'octeontx_ethdev.c' ) -allow_experimental_apis = true - deps += ['mempool_octeontx', 'eventdev'] includes += include_directories('base')
drivers/net/pfe/meson.build +0 -5
@@ -15,9 +15,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -allow_experimental_apis = true - includes += include_directories('base')
drivers/net/qede/base/meson.build +1 -3
@@ -45,9 +45,7 @@ error_cflags = [ '-Wno-pointer-bool-conversion', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/qede/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/sfc/base/meson.build +1 -3
@@ -63,9 +63,7 @@ extra_flags = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: extra_flags if cc.has_argument(flag) c_args += flag
drivers/net/sfc/meson.build +0 -2
@@ -11,8 +11,6 @@ if arch_subdir != 'x86' or not dpdk_conf.get('RTE_ARCH_64') reason = 'only supported on x86_64' endif -allow_experimental_apis = true - extra_flags = [] # Strict-aliasing rules are violated by rte_eth_link to uint64_t casts
drivers/net/softnic/meson.build +0 -1
@@ -5,7 +5,6 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true install_headers('rte_eth_softnic.h') sources = files('rte_eth_softnic_tm.c', 'rte_eth_softnic.c',
drivers/net/tap/meson.build +0 -1
@@ -39,7 +39,6 @@ args = [ 'TCA_ACT_BPF_FD' ], ] config = configuration_data() -allow_experimental_apis = true foreach arg:args config.set(arg[0], cc.has_header_symbol(arg[1], arg[2])) endforeach
drivers/net/thunderx/base/meson.build +1 -3
@@ -8,9 +8,7 @@ sources = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif +c_args += '-DALLOW_EXPERIMENTAL_API' base_lib = static_library('nicvf_base', sources, c_args: c_args, dependencies: static_rte_ethdev
drivers/net/thunderx/meson.build +0 -1
@@ -4,7 +4,6 @@ subdir('base') objs = [base_objs] -allow_experimental_apis = true sources = files('nicvf_rxtx.c', 'nicvf_ethdev.c', 'nicvf_svf.c'
drivers/net/vdev_netvsc/meson.build +0 -2
@@ -7,8 +7,6 @@ if not is_linux endif sources = files('vdev_netvsc.c') -allow_experimental_apis = true - cflags_options = [ '-D_BSD_SOURCE', '-D_DEFAULT_SOURCE',
drivers/net/virtio/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources += files('virtio_ethdev.c', 'virtio_pci.c', 'virtio_rxtx.c',
drivers/net/vmxnet3/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources += files( 'vmxnet3_ethdev.c', 'vmxnet3_rxtx.c',
drivers/raw/dpaa2_cmdif/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_cmdif.h')
drivers/raw/dpaa2_qdma/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_qdma.h')
drivers/raw/ifpga/meson.build +0 -2
@@ -23,5 +23,3 @@ sources = files('ifpga_rawdev.c') includes += include_directories('base') includes += include_directories('../../net/ipn3ke') includes += include_directories('../../net/i40e') - -allow_experimental_apis = true
drivers/raw/ntb/meson.build +0 -1
@@ -6,4 +6,3 @@ deps += ['rawdev', 'mbuf', 'mempool', sources = files('ntb.c', 'ntb_hw_intel.c') install_headers('rte_pmd_ntb.h') -allow_experimental_apis = true
drivers/vdpa/ifc/meson.build +0 -1
@@ -3,7 +3,6 @@ build = dpdk_conf.has('RTE_LIBRTE_VHOST') reason = 'missing dependency, DPDK vhost library' -allow_experimental_apis = true sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') deps += 'vhost'
drivers/vdpa/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux endif fmt_name = 'mlx5_vdpa' -allow_experimental_apis = true deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'bus_pci', 'eal', 'sched'] sources = files( 'mlx5_vdpa.c',
lib/librte_bbdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_bbdev.c') headers = files('rte_bbdev.h', 'rte_bbdev_pmd.h',
lib/librte_bpf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('bpf.c', 'bpf_exec.c', 'bpf_load.c',
lib/librte_cmdline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('cmdline.c', 'cmdline_cirbuf.c', 'cmdline_parse.c',
lib/librte_compressdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('rte_compressdev.c', 'rte_compressdev_pmd.c', 'rte_comp.c')
lib/librte_cryptodev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_cryptodev.c', 'rte_cryptodev_pmd.c') headers = files('rte_cryptodev.h', 'rte_cryptodev_pmd.h',
lib/librte_eal/meson.build +0 -1
@@ -11,7 +11,6 @@ subdir(exec_env) subdir(arch_subdir) -allow_experimental_apis = true deps += 'kvargs' if dpdk_conf.has('RTE_USE_LIBBSD') ext_deps += libbsd
lib/librte_ethdev/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'ethdev' -allow_experimental_apis = true sources = files('ethdev_private.c', 'ethdev_profile.c', 'rte_class_eth.c',
lib/librte_eventdev/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - if is_linux cflags += '-DLINUX' else
lib/librte_fib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_fib.c', 'rte_fib6.c', 'dir24_8.c', 'trie.c') headers = files('rte_fib.h', 'rte_fib6.h') deps += ['rib']
lib/librte_flow_classify/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_flow_classify.c', 'rte_flow_classify_parse.c') headers = files('rte_flow_classify.h') deps += ['net', 'table']
lib/librte_gso/meson.build +1 -1
@@ -2,6 +2,6 @@ # Copyright(c) 2017 Intel Corporation sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c', - 'gso_tunnel_tcp4.c', 'rte_gso.c') + 'gso_tunnel_tcp4.c', 'rte_gso.c') headers = files('rte_gso.h') deps += ['ethdev']
lib/librte_hash/meson.build +0 -3
@@ -10,6 +10,3 @@ headers = files('rte_crc_arm64.h', sources = files('rte_cuckoo_hash.c', 'rte_fbk_hash.c') deps += ['ring'] - -# rte ring reset is not yet part of stable API -allow_experimental_apis = true
lib/librte_ipsec/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - sources = files('esp_inb.c', 'esp_outb.c', 'sa.c', 'ses.c', 'ipsec_sad.c') headers = files('rte_ipsec.h', 'rte_ipsec_group.h', 'rte_ipsec_sa.h', 'rte_ipsec_sad.h')
lib/librte_mbuf/meson.build +0 -2
@@ -7,5 +7,3 @@ headers = files('rte_mbuf.h', 'rte_mbuf_core.h', 'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h', 'rte_mbuf_dyn.h') deps += ['mempool'] - -allow_experimental_apis = true
lib/librte_mempool/meson.build +0 -3
@@ -15,6 +15,3 @@ sources = files('rte_mempool.c', 'rte_mempool_ops.c', 'rte_mempool_ops_default.c') headers = files('rte_mempool.h') deps += ['ring'] - -# memseg walk is not yet part of stable API -allow_experimental_apis = true
lib/librte_net/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true headers = files('rte_ip.h', 'rte_tcp.h', 'rte_udp.h',
lib/librte_pdump/meson.build +0 -1
@@ -3,5 +3,4 @@ sources = files('rte_pdump.c') headers = files('rte_pdump.h') -allow_experimental_apis = true deps += ['ethdev']
lib/librte_pipeline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_pipeline.c', 'rte_port_in_action.c', 'rte_table_action.c') headers = files('rte_pipeline.h', 'rte_port_in_action.h', 'rte_table_action.h') deps += ['port', 'table', 'meter', 'sched', 'cryptodev']
lib/librte_rcu/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Arm Limited -allow_experimental_apis = true - sources = files('rte_rcu_qsbr.c') headers = files('rte_rcu_qsbr.h')
lib/librte_rib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_rib.c', 'rte_rib6.c') headers = files('rte_rib.h', 'rte_rib6.h') deps += ['mempool']
lib/librte_ring/meson.build +0 -3
@@ -6,6 +6,3 @@ headers = files('rte_ring.h', 'rte_ring_elem.h', 'rte_ring_c11_mem.h', 'rte_ring_generic.h') - -# rte_ring_create_elem and rte_ring_get_memsize_elem are experimental -allow_experimental_apis = true
lib/librte_stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_stack.c', 'rte_stack_std.c', 'rte_stack_lf.c') headers = files('rte_stack.h', 'rte_stack_std.h',
lib/librte_telemetry/meson.build +0 -1
@@ -4,7 +4,6 @@ sources = files('rte_telemetry.c', 'rte_telemetry_parser.c', 'rte_telemetry_parser_test.c') headers = files('rte_telemetry.h', 'rte_telemetry_internal.h', 'rte_telemetry_parser.h') deps += ['metrics', 'ethdev'] -cflags += '-DALLOW_EXPERIMENTAL_API' jansson = dependency('jansson', required: false) if jansson.found()
lib/librte_timer/meson.build +0 -1
@@ -3,4 +3,3 @@ sources = files('rte_timer.c') headers = files('rte_timer.h') -allow_experimental_apis = true
lib/librte_vhost/meson.build +0 -1
@@ -17,7 +17,6 @@ elif (toolchain == 'icc' and cc.version().version_compare('>=16.0.0')) endif dpdk_conf.set('RTE_LIBRTE_VHOST_POSTCOPY', cc.has_header('linux/userfaultfd.h')) -allow_experimental_apis = true cflags += '-fno-strict-aliasing' sources = files('fd_man.c', 'iotlb.c', 'socket.c', 'vdpa.c', 'vhost.c', 'vhost_user.c',
lib/meson.build +1 -4
@@ -47,7 +47,6 @@ foreach l:libraries build = true reason = '<unknown reason>' # set if build == false to explain why name = l - allow_experimental_apis = false use_function_versioning = false sources = [] headers = []
@@ -98,9 +97,7 @@ foreach l:libraries static_dep = shared_dep else - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif + cflags += '-DALLOW_EXPERIMENTAL_API' if use_function_versioning cflags += '-DRTE_USE_FUNCTION_VERSIONING' endif
--
2.17.1
PATCH v2 2/2 build: makefile make experimental tag as global
From: Pavan Nikhilesh <[email protected]>
Make allow_experimental_api global across lib, drivers and apps.
--- app/test-bbdev/Makefile | 1 - app/test-compress-perf/Makefile | 1 - app/test-crypto-perf/Makefile | 1 - app/test-fib/Makefile | 1 - app/test-pmd/Makefile | 1 - app/test-sad/Makefile | 1 - app/test/Makefile | 2 -- drivers/baseband/fpga_lte_fec/Makefile | 1 - drivers/baseband/null/Makefile | 1 - drivers/baseband/turbo_sw/Makefile | 1 - drivers/bus/dpaa/Makefile | 1 - drivers/bus/fslmc/Makefile | 1 - drivers/bus/ifpga/Makefile | 1 - drivers/bus/pci/Makefile | 4 ---- drivers/bus/vdev/Makefile | 1 - drivers/bus/vmbus/Makefile | 1 - drivers/common/dpaax/Makefile | 1 - drivers/common/iavf/Makefile | 1 - drivers/common/octeontx2/Makefile | 1 - drivers/common/qat/Makefile | 1 - drivers/compress/isal/Makefile | 1 - drivers/compress/octeontx/Makefile | 1 - drivers/compress/zlib/Makefile | 1 - drivers/crypto/aesni_gcm/Makefile | 1 - drivers/crypto/aesni_mb/Makefile | 1 - drivers/crypto/armv8/Makefile | 1 - drivers/crypto/caam_jr/Makefile | 2 -- drivers/crypto/dpaa2_sec/Makefile | 1 - drivers/crypto/dpaa_sec/Makefile | 1 - drivers/crypto/kasumi/Makefile | 1 - drivers/crypto/nitrox/Makefile | 1 - drivers/crypto/octeontx/Makefile | 1 - drivers/crypto/octeontx2/Makefile | 1 - drivers/crypto/openssl/Makefile | 1 - drivers/crypto/snow3g/Makefile | 1 - drivers/crypto/zuc/Makefile | 1 - drivers/event/dpaa/Makefile | 1 - drivers/event/dpaa2/Makefile | 3 --- drivers/event/dsw/Makefile | 3 --- drivers/event/octeontx2/Makefile | 1 - drivers/event/opdl/Makefile | 1 - drivers/mempool/bucket/Makefile | 1 - drivers/mempool/dpaa/Makefile | 3 --- drivers/mempool/dpaa2/Makefile | 3 --- drivers/mempool/octeontx/Makefile | 1 - drivers/mempool/octeontx2/Makefile | 4 +--- drivers/mempool/stack/Makefile | 1 - drivers/net/atlantic/Makefile | 1 - drivers/net/avp/Makefile | 1 - drivers/net/axgbe/Makefile | 1 - drivers/net/bnx2x/Makefile | 1 - drivers/net/bonding/Makefile | 1 - drivers/net/dpaa/Makefile | 3 --- drivers/net/dpaa2/Makefile | 3 --- drivers/net/e1000/Makefile | 1 - drivers/net/ena/Makefile | 2 -- drivers/net/enetc/Makefile | 1 - drivers/net/enic/Makefile | 2 -- drivers/net/failsafe/Makefile | 1 - drivers/net/fm10k/Makefile | 1 - drivers/net/fm10k/base/meson.build | 1 - drivers/net/hns3/Makefile | 1 - drivers/net/i40e/Makefile | 1 - drivers/net/iavf/Makefile | 2 +- drivers/net/ice/Makefile | 1 - drivers/net/ionic/Makefile | 3 --- drivers/net/ipn3ke/Makefile | 1 - drivers/net/ixgbe/Makefile | 1 - drivers/net/memif/Makefile | 7 ------- drivers/net/mlx4/Makefile | 1 - drivers/net/mlx5/Makefile | 3 --- drivers/net/netvsc/Makefile | 1 - drivers/net/nfp/Makefile | 1 - drivers/net/octeontx/Makefile | 2 -- drivers/net/pfe/Makefile | 4 ---- drivers/net/qede/Makefile | 1 - drivers/net/sfc/Makefile | 1 - drivers/net/softnic/Makefile | 1 - drivers/net/tap/Makefile | 1 - drivers/net/thunderx/Makefile | 1 - drivers/net/vdev_netvsc/Makefile | 1 - drivers/net/virtio/Makefile | 1 - drivers/net/vmxnet3/Makefile | 1 - drivers/raw/dpaa2_cmdif/Makefile | 1 - drivers/raw/dpaa2_qdma/Makefile | 1 - drivers/raw/ifpga/Makefile | 1 - drivers/raw/ntb/Makefile | 1 - drivers/vdpa/ifc/Makefile | 1 - drivers/vdpa/mlx5/Makefile | 2 -- lib/librte_bbdev/Makefile | 1 - lib/librte_bpf/Makefile | 1 - lib/librte_cmdline/Makefile | 1 - lib/librte_compressdev/Makefile | 1 - lib/librte_cryptodev/Makefile | 1 - lib/librte_eal/freebsd/Makefile | 1 - lib/librte_eal/linux/Makefile | 1 - lib/librte_ethdev/Makefile | 1 - lib/librte_eventdev/Makefile | 1 - lib/librte_fib/Makefile | 1 - lib/librte_flow_classify/Makefile | 1 - lib/librte_hash/Makefile | 2 +- lib/librte_ipsec/Makefile | 1 - lib/librte_mbuf/Makefile | 1 - lib/librte_mempool/Makefile | 4 ---- lib/librte_net/Makefile | 1 - lib/librte_pdump/Makefile | 1 - lib/librte_pipeline/Makefile | 1 - lib/librte_power/Makefile | 1 - lib/librte_rcu/Makefile | 1 - lib/librte_rib/Makefile | 1 - lib/librte_ring/Makefile | 2 +- lib/librte_stack/Makefile | 1 - lib/librte_telemetry/Makefile | 1 - lib/librte_timer/Makefile | 1 - lib/librte_vhost/Makefile | 1 - mk/rte.app.mk | 2 ++ mk/rte.lib.mk | 1 + 117 files changed, 7 insertions(+), 154 deletions(-)
app/test-bbdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # APP = testbbdev -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
app/test-compress-perf/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-compress-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-crypto-perf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-crypto-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-fib/Makefile +0 -1
@@ -9,7 +9,6 @@ APP = testfib CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDFLAGS += -lresolv
app/test-pmd/Makefile +0 -1
@@ -10,7 +10,6 @@ ifeq ($(CONFIG_RTE_TEST_PMD),y) # APP = testpmd -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-deprecated-declarations
app/test-sad/Makefile +0 -1
@@ -8,7 +8,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) APP = testsad CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # all source are stored in SRCS-y SRCS-y := main.c
app/test/Makefile +0 -2
@@ -237,8 +237,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) LDLIBS += -lrte_ipsec endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/baseband/fpga_lte_fec/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_fpga_lte_fec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/baseband/null/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_null.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/baseband/turbo_sw/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_turbo_sw.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/bus/dpaa/Makefile +0 -1
@@ -9,7 +9,6 @@ RTE_BUS_DPAA=$(RTE_SDK)/drivers/bus/dpaa # LIB = librte_bus_dpaa.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/bus/fslmc/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_fslmc.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/bus/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal
drivers/bus/pci/Makefile +0 -4
@@ -8,7 +8,6 @@ EXPORT_MAP := rte_bus_pci_version.map CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
@@ -20,9 +19,6 @@ endif CFLAGS += -I$(RTE_SDK)/drivers/bus/pci/$(SYSTEM) CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common -# memseg walk is not part of stable API yet -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_pci -lrte_kvargs
drivers/bus/vdev/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_bus_vdev.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_bus_vdev_version.map
drivers/bus/vmbus/Makefile +0 -1
@@ -7,7 +7,6 @@ EXPORT_MAP := rte_bus_vmbus_version.map CFLAGS += -I$(SRCDIR) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
drivers/common/dpaax/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_dpaax.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/iavf/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_iavf.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/octeontx2/Makefile +0 -1
@@ -13,7 +13,6 @@ CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/bus/pci -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/common/qat/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(QAT_COMPRESS_DIR) ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y) - CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_compressdev SRCS-y += qat_comp.c SRCS-y += qat_comp_pmd.c
drivers/compress/isal/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_isal_comp.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # external library dependencies LDLIBS += -lisal
drivers/compress/octeontx/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_octeontx_zip.a # build flags CFLAGS += $(WERROR_FLAGS) CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(RTE_SDK)/drivers/compress/octeontx/include # external library include paths
drivers/compress/zlib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zlib.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zlib_version.map
drivers/crypto/aesni_gcm/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_pmd_aesni_gcm.a # build flags CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) # versioning export map
drivers/crypto/aesni_mb/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_aesni_mb.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_aesni_mb_version.map
drivers/crypto/armv8/Makefile +0 -1
@@ -24,7 +24,6 @@ EXPORT_MAP := rte_pmd_armv8_version.map # external library dependencies CFLAGS += -I$(ARMV8_CRYPTO_LIB_PATH) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -L$(ARMV8_CRYPTO_LIB_PATH) -lAArch64crypto LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_cryptodev
drivers/crypto/caam_jr/Makefile +0 -2
@@ -9,8 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_caam_jr.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -D _GNU_SOURCE CFLAGS += -O3
drivers/crypto/dpaa2_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa2_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/dpaa_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/kasumi/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_kasumi.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_kasumi_version.map
drivers/crypto/nitrox/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_nitrox.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_nitrox_version.map
drivers/crypto/octeontx/Makefile +0 -1
@@ -19,7 +19,6 @@ VPATH += $(RTE_SDK)/drivers/crypto/octeontx CFLAGS += -O3 CFLAGS += -I$(RTE_SDK)/drivers/common/cpt -CFLAGS += -DALLOW_EXPERIMENTAL_API # PMD code SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev.c
drivers/crypto/octeontx2/Makefile +0 -1
@@ -23,7 +23,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/crypto/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/crypto/openssl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_openssl.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_openssl_version.map
drivers/crypto/snow3g/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_snow3g.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_snow3g_version.map
drivers/crypto/zuc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zuc.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zuc_version.map
drivers/event/dpaa/Makefile +0 -1
@@ -10,7 +10,6 @@ RTE_SDK_DPAA=$(RTE_SDK)/drivers/net/dpaa # LIB = librte_pmd_dpaa_event.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/event/dpaa2/Makefile +0 -3
@@ -31,9 +31,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec # versioning export map EXPORT_MAP := rte_pmd_dpaa2_event_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # # all source are stored in SRCS-y #
drivers/event/dsw/Makefile +0 -3
@@ -11,9 +11,6 @@ ifneq ($(CONFIG_RTE_TOOLCHAIN_ICC),y) CFLAGS += -Wno-format-nonliteral endif -# Depends on rte_ring_elem_*() -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal LDLIBS += -lrte_mbuf LDLIBS += -lrte_mempool
drivers/event/octeontx2/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/event/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/event/opdl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_opdl_event.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_eventdev -lrte_kvargs LDLIBS += -lrte_bus_vdev -lrte_mbuf -lrte_mempool
drivers/mempool/bucket/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_mempool_bucket.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring
drivers/mempool/dpaa/Makefile +0 -3
@@ -19,9 +19,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_mempool # versioning export map EXPORT_MAP := rte_mempool_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += dpaa_mempool.c
drivers/mempool/dpaa2/Makefile +0 -3
@@ -18,9 +18,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include # versioning export map EXPORT_MAP := rte_mempool_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL) += dpaa2_hw_mempool.c
drivers/mempool/octeontx/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_mempool_octeontx.a CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx/ -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_mempool_octeontx_version.map
drivers/mempool/octeontx2/Makefile +1 -3
@@ -23,8 +23,6 @@ CFLAGS += -diag-disable 2259 endif endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - EXPORT_MAP := rte_mempool_octeontx2_version.map #
@@ -32,7 +30,7 @@ EXPORT_MAP := rte_mempool_octeontx2_version.map # SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL) += \ otx2_mempool_ops.c \ - otx2_mempool.c \ + otx2_mempool.c \ otx2_mempool_irq.c \ otx2_mempool_debug.c
drivers/mempool/stack/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_mempool_stack.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Headers CFLAGS += -I$(RTE_SDK)/lib/librte_mempool
drivers/net/atlantic/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_atlantic.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_atlantic_version.map
drivers/net/avp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_avp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/axgbe/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_axgbe.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_axgbe_version.map
drivers/net/bnx2x/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_bnx2x.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -DZLIB_CONST -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lz LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
drivers/net/bonding/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_bond.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/dpaa/Makefile +0 -3
@@ -25,9 +25,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include EXPORT_MAP := rte_pmd_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
drivers/net/dpaa2/Makefile +0 -3
@@ -24,9 +24,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2 # versioning export map EXPORT_MAP := rte_pmd_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += base/dpaa2_hw_dpni.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_rxtx.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_ethdev.c
drivers/net/e1000/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_e1000.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/ena/Makefile +0 -2
@@ -12,8 +12,6 @@ CFLAGS += $(WERROR_FLAGS) -O2 INCLUDES :=-I$(SRCDIR) -I$(SRCDIR)/base/ena_defs -I$(SRCDIR)/base EXPORT_MAP := rte_pmd_ena_version.map -# rte_fbarray is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API VPATH += $(SRCDIR)/base #
drivers/net/enetc/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_enetc.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_enetc_version.map SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_rxtx.c
drivers/net/enic/Makefile +0 -2
@@ -11,8 +11,6 @@ LIB = librte_pmd_enic.a EXPORT_MAP := rte_pmd_enic_version.map -# Experimental APIs used: rte_intr_ack -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/failsafe/Makefile +0 -1
@@ -27,7 +27,6 @@ endif # No exported include files # Basic CFLAGS: -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -std=gnu99 -Wextra CFLAGS += -O3 CFLAGS += -I.
drivers/net/fm10k/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_fm10k.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_fm10k_version.map
drivers/net/fm10k/base/meson.build +0 -1
@@ -16,7 +16,6 @@ error_cflags = ['-Wno-unused-parameter', '-Wno-unused-value', '-Wno-implicit-fallthrough' ] c_args = cflags -c_args += '-DALLOW_EXPERIMENTAL_API' foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/hns3/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_hns3.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Experimantal APIs: # - rte_mp_action_register # - rte_mp_action_unregister
drivers/net/i40e/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_i40e.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -DPF_DRIVER -DVF_DRIVER -DINTEGRATED_VF CFLAGS += -DX722_A0_SUPPORT -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash
drivers/net/iavf/Makefile +1 -1
@@ -9,7 +9,7 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_iavf.a CFLAGS += -I$(RTE_SDK)/drivers/common/iavf -CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_pci
drivers/net/ice/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_ice.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_ethdev -lrte_kvargs LDLIBS += -lrte_bus_pci -lrte_mempool -lrte_hash
drivers/net/ionic/Makefile +0 -3
@@ -8,9 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ionic.a -# Required to use rte_eth_dev_create and rte_eth_dev_destroy -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/ipn3ke/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_pmd_ipn3ke.a # rte_eth_dev_destroy() # rte_eth_switch_domain_free() # -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/net/ixgbe/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ixgbe.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/memif/Makefile +0 -7
@@ -12,13 +12,6 @@ EXPORT_MAP := rte_pmd_memif_version.map CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool LDLIBS += -lrte_ethdev -lrte_kvargs -lrte_net LDLIBS += -lrte_hash
drivers/net/mlx4/Makefile +0 -1
@@ -38,7 +38,6 @@ CFLAGS += -D_BSD_SOURCE CFLAGS += -D_DEFAULT_SOURCE CFLAGS += -D_XOPEN_SOURCE=600 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y) CFLAGS += -DMLX4_GLUE='"$(LIB_GLUE)"' CFLAGS += -DMLX4_GLUE_VERSION='"$(LIB_GLUE_VERSION)"'
drivers/net/mlx5/Makefile +0 -3
@@ -56,9 +56,6 @@ CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG. ifeq ($(DEBUG),1)
drivers/net/netvsc/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_netvsc.a CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_netvsc_version.map
drivers/net/nfp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_nfp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/octeontx/Makefile +0 -2
@@ -42,8 +42,6 @@ else CFLAGS_octeontx_rxtx.o += -O3 -Ofast endif -CFLAGS_octeontx_ethdev.o += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_common_octeontx LDLIBS += -lrte_mempool_octeontx
drivers/net/pfe/Makefile +0 -4
@@ -15,10 +15,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/net/pfe/base/ CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax EXPORT_MAP := rte_pmd_pfe_version.map -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -CFLAGS += -DALLOW_EXPERIMENTAL_API # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_PFE_PMD) += pfe_ethdev.c
drivers/net/qede/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_qede.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/sfc/Makefile +0 -1
@@ -13,7 +13,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_sfc_efx.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/softnic/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_softnic.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_pipeline -lrte_port -lrte_table
drivers/net/tap/Makefile +0 -1
@@ -20,7 +20,6 @@ CFLAGS += -O3 CFLAGS += -I$(SRCDIR) CFLAGS += -I. CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_vdev -lrte_gso
drivers/net/thunderx/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_thunderx_nicvf.a CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/vdev_netvsc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_vdev_netvsc.a EXPORT_MAP := rte_pmd_vdev_netvsc_version.map # Additional compilation flags. -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += -g CFLAGS += -Wall -Wextra
drivers/net/virtio/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_virtio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/vmxnet3/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_vmxnet3_uio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_cmdif/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_cmdif.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_qdma/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_qdma.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/raw/ntb/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ntb.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
drivers/vdpa/ifc/Makefile +0 -1
@@ -14,7 +14,6 @@ LDLIBS += -lrte_kvargs CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # # Add extra flags for base driver source files to disable warnings in them
drivers/vdpa/mlx5/Makefile +0 -2
@@ -35,8 +35,6 @@ LDLIBS += -lrte_eal -lrte_vhost -lrte_kvargs -lrte_pci -lrte_bus_pci -lrte_sched CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_vdpa_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG.
lib/librte_bbdev/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_bbdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf
lib/librte_bpf/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_bpf.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_net -lrte_eal LDLIBS += -lrte_mempool -lrte_ring LDLIBS += -lrte_mbuf -lrte_ethdev
lib/librte_cmdline/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_cmdline.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_cmdline_version.map
lib/librte_compressdev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_compressdev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_kvargs # library source files
lib/librte_cryptodev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_cryptodev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring -lrte_mbuf LDLIBS += -lrte_kvargs
lib/librte_eal/freebsd/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_eal/linux/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_ethdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_ethdev.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_net -lrte_eal -lrte_mempool -lrte_ring
lib/librte_eventdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_eventdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
lib/librte_fib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_fib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_rib EXPORT_MAP := rte_fib_version.map
lib/librte_flow_classify/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_flow_classify.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
lib/librte_hash/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_hash.a -CFLAGS += -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) LDLIBS += -lrte_eal -lrte_ring
lib/librte_ipsec/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_ipsec.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_net LDLIBS += -lrte_cryptodev -lrte_security -lrte_hash
lib/librte_mbuf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mbuf.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool
lib/librte_mempool/Makefile +0 -4
@@ -7,14 +7,10 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mempool.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ring EXPORT_MAP := rte_mempool_version.map -# memseg walk is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool.c SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool_ops.c
lib/librte_net/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_net.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_mbuf -lrte_eal -lrte_mempool
lib/librte_pdump/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_pdump.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_ethdev
lib/librte_pipeline/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pipeline.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_table
lib/librte_power/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_power.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing LDLIBS += -lrte_eal -lrte_timer
lib/librte_rcu/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_rcu.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_rib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_rib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool EXPORT_MAP := rte_rib_version.map
lib/librte_ring/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_ring.a -CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal EXPORT_MAP := rte_ring_version.map
lib/librte_stack/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_stack.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal EXPORT_MAP := rte_stack_version.map
lib/librte_telemetry/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_telemetry.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ethdev LDLIBS += -lrte_metrics
lib/librte_timer/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_timer.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_vhost/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_vhost.a EXPORT_MAP := rte_vhost_version.map -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 CFLAGS += -I vhost_user CFLAGS += -fno-strict-aliasing
mk/rte.app.mk +2 -0
@@ -27,6 +27,8 @@ LDFLAGS += --as-needed # default path for libs _LDLIBS-y += -L$(RTE_SDK_BIN)/lib +CFLAGS += -DALLOW_EXPERIMENTAL_API + # # Order is important: from higher level to lower level #
mk/rte.lib.mk +1 -0
@@ -34,6 +34,7 @@ _INSTALL = $(INSTALL-FILES-y) $(RTE_OUTPUT)/lib/$(LIB) _CLEAN = doclean LDLIBS += $(EXECENV_LDLIBS-y) +CFLAGS += -DALLOW_EXPERIMENTAL_API .PHONY: all all: install
Signature · 1 line
2.17.1
Hello Jerin, Pavan,
Thanks for the patch.
Quoted 4 lines · Jerin Jacob
From: Pavan Nikhilesh <[email protected]>
Meson make
allow_experimental_apiglobal across lib, drivers and apps.
- The title seems odd to me.
- The documentation should be updated.
- You can still find traces in meson files.
$ git grep -il allow.experimental.api |grep meson.build$ |grep -vE '^((app|drivers|lib)/meson.build|examples/)' app/test/meson.build drivers/net/e1000/base/meson.build drivers/net/enic/meson.build drivers/net/i40e/base/meson.build drivers/net/i40e/meson.build drivers/net/ixgbe/base/meson.build drivers/net/octeontx/base/meson.build drivers/net/qede/base/meson.build drivers/net/sfc/base/meson.build drivers/net/thunderx/base/meson.build lib/librte_mempool/meson.build
Signature · 1 line
David Marchand
Quoted 15 lines · David Marchand
On Thu, Apr 2, 2020 at 8:33 PM Jerin Jacob <[email protected]> wrote:
- You can still find traces in meson files.$ git grep -il allow.experimental.api |grep meson.build$ |grep -vE '^((app|drivers|lib)/meson.build|examples/)' app/test/meson.build drivers/net/e1000/base/meson.build drivers/net/enic/meson.build drivers/net/i40e/base/meson.build drivers/net/i40e/meson.build drivers/net/ixgbe/base/meson.build drivers/net/octeontx/base/meson.build drivers/net/qede/base/meson.build drivers/net/sfc/base/meson.build drivers/net/thunderx/base/meson.build lib/librte_mempool/meson.build
Sorry, those drivers passing directly the cflag were special cases. This just leaves lib/librte_mempool/meson.build to clean.
Signature · 1 line
David Marchand
Quoted 18 lines
Quoted 1 line · <[email protected]> wrote:
On Thu, Apr 2, 2020 at 8:33 PM Jerin Jacob <[email protected]>
Quoted 14 lines · wrote:
- You can still find traces in meson files.
$ git grep -il allow.experimental.api |grep meson.build$ |grep -vE '^((app|drivers|lib)/meson.build|examples/)' app/test/meson.build drivers/net/e1000/base/meson.build drivers/net/enic/meson.build drivers/net/i40e/base/meson.build drivers/net/i40e/meson.build drivers/net/ixgbe/base/meson.build drivers/net/octeontx/base/meson.build drivers/net/qede/base/meson.build drivers/net/sfc/base/meson.build drivers/net/thunderx/base/meson.build lib/librte_mempool/meson.build
Quoted 1 line
Sorry, those drivers passing directly the cflag were special cases.
Yup. Mostly base static libs.
Quoted 1 line
This just leaves
lib/librte_mempool/meson.buildto clean.
I will clean it up in v3. Along with modifying title and updating doc.
Doc to be updated are coding styles and release notes right? Let me know if anything else need to be added to the list.
Quoted 4 lines
--
David Marchand
Thanks,
Pavan.
Quoted 19 lines · Pavan Nikhilesh Bhagavatula
Quoted 19 lines
Quoted 1 line · <[email protected]> wrote:
On Thu, Apr 2, 2020 at 8:33 PM Jerin Jacob <[email protected]>
Quoted 14 lines · wrote:
- You can still find traces in meson files.
$ git grep -il allow.experimental.api |grep meson.build$ |grep -vE '^((app|drivers|lib)/meson.build|examples/)' app/test/meson.build drivers/net/e1000/base/meson.build drivers/net/enic/meson.build drivers/net/i40e/base/meson.build drivers/net/i40e/meson.build drivers/net/ixgbe/base/meson.build drivers/net/octeontx/base/meson.build drivers/net/qede/base/meson.build drivers/net/sfc/base/meson.build drivers/net/thunderx/base/meson.build lib/librte_mempool/meson.build
Quoted 3 lines
Quoted 1 line
Sorry, those drivers passing directly the cflag were special cases.
Yup. Mostly base static libs.
Actually, how about something like this in drivers/meson.build ? Bruce, do you see something wrong with this ?
on top of Pavan patch:
drivers/meson.build +1 -1
@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endif
@@ -105,7 +105,6 @@ foreach class:dpdk_driver_classes
dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
lib_name = driver_name_fmt.format(fmt_name)
- cflags += '-DALLOW_EXPERIMENTAL_API'
dpdk_extra_ldflags += pkgconfig_extra_libs
# generate pmdinfo sources by building a temporary
Since the base drivers make use of "cflags", it works afaics.
Quoted 7 lines
Quoted 2 lines
This just leaves
lib/librte_mempool/meson.buildto clean.I will clean it up in v3. Along with modifying title and updating doc.
Doc to be updated are coding styles and release notes right? Let me know if anything else need to be added to the list.
lgtm, thanks.
Signature · 1 line
David Marchand
Quoted 35 lines · David Marchand
Quoted 19 lines · Pavan Nikhilesh Bhagavatula
Quoted 19 lines
Quoted 1 line · <[email protected]> wrote:
On Thu, Apr 2, 2020 at 8:33 PM Jerin Jacob <[email protected]>
Quoted 14 lines · wrote:
- You can still find traces in meson files.
$ git grep -il allow.experimental.api |grep meson.build$ |grep -vE '^((app|drivers|lib)/meson.build|examples/)' app/test/meson.build drivers/net/e1000/base/meson.build drivers/net/enic/meson.build drivers/net/i40e/base/meson.build drivers/net/i40e/meson.build drivers/net/ixgbe/base/meson.build drivers/net/octeontx/base/meson.build drivers/net/qede/base/meson.build drivers/net/sfc/base/meson.build drivers/net/thunderx/base/meson.build lib/librte_mempool/meson.buildQuoted 3 lines
Quoted 1 line
Sorry, those drivers passing directly the cflag were special cases.
Yup. Mostly base static libs.
Actually, how about something like this in
drivers/meson.build? Bruce, do you see something wrong with this ?on top of Pavan patch:
drivers/meson.build +0
-0
drivers/meson.build dpdk_driver_classes = ['common', · line 26
Quoted 8 lines
drivers/meson.build +1
-1@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endif
I see nothing wrong with that.
Out of interest, is there a reason we don't just set it at the top level as a project c_arg, e.g. after setting "-include rte_config.h" in config/meson.build?
Quoted 16 lines · Bruce Richardson
drivers/meson.build dpdk_driver_classes = ['common', · line 26
Quoted 13 lines
drivers/meson.build +1
-1@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endifI see nothing wrong with that.
Quoted 3 lines
Out of interest, is there a reason we don't just set it at the top level as a project
c_arg, e.g. after setting "-includerte_config.h" in config/meson.build?
As long as it is not inherited by examples and external apps, I am fine with any simple solution :-).
Signature · 1 line
David Marchand
Quoted 18 lines · David Marchand
Quoted 16 lines · Bruce Richardson
drivers/meson.build dpdk_driver_classes = ['common', · line 26
Quoted 13 lines
drivers/meson.build +1
-1@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endifI see nothing wrong with that.
Quoted 7 lines
Quoted 3 lines
Out of interest, is there a reason we don't just set it at the top level as a project
c_arg, e.g. after setting "-includerte_config.h" in config/meson.build?As long as it is not inherited by examples and external apps, I am fine with any simple solution :-).
It will be inherited by everything inside the current build, but building any examples separately or any external apps separately won't be affected.
/Bruce
Quoted 9 lines
Subject: [dpdk-dev] [PATCH v2 1/2] build: meson make experimental tag as global
From: Pavan Nikhilesh <[email protected]>
Meson make
allow_experimental_apiglobal across lib, drivers and apps.Signed-off-by Pavan Nikhilesh <[email protected]>---
03/04/2020 10:05, Pavan Nikhilesh Bhagavatula:
Quoted 1 line
Let me know if anything else need to be added to the list.
I think you can squash the patches in a single one.
Quoted 13 lines
-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Friday, April 3, 2020 4:26 PM
To: Pavan Nikhilesh Bhagavatula <[email protected]>
Cc: David Marchand <[email protected]>; Jerin Jacob <[email protected]>; Ferruh Yigit <[email protected]>; Bruce Richardson <[email protected]>; dev <[email protected]>; Neil Horman <[email protected]>
Subject: Re: [EXT] Re: [dpdk-dev] [PATCH v2 1/2] build: meson make experimental tag as global
Quoted 5 lines
03/04/2020 10:05, Pavan Nikhilesh Bhagavatula:
Quoted 1 line
Let me know if anything else need to be added to the list.
I think you can squash the patches in a single one.
Sure I'll do that in v3.
PATCH v3 1/1 build: enable allow experimental API flag globally
In reply to Jerin JacobFrom: Pavan Nikhilesh <[email protected]>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and meson.build in app, lib and drivers instead enable ALLOW_EXPERIMENTAL_API flag globally.
This changes reduces the clutter across the project while still maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning external applications about experimental API usage.
---
Based on discussion at
http://mails.dpdk.org/archives/dev/2020-April/161527.html
v3 Changes:
- fixup stray allow_experimental_api flags.
- squash meson and make changes together.
- remove allow_experimental_api flag from base libs of various drivers.
v2 Changes:
- Remove comments containing experimental API list.
app/meson.build | 6 +----- app/test-bbdev/Makefile | 1 - app/test-bbdev/meson.build | 1 - app/test-compress-perf/Makefile | 1 - app/test-compress-perf/meson.build | 1 - app/test-crypto-perf/Makefile | 1 - app/test-crypto-perf/meson.build | 1 - app/test-fib/Makefile | 1 - app/test-fib/meson.build | 1 - app/test-pmd/Makefile | 1 - app/test-pmd/meson.build | 1 - app/test-sad/Makefile | 1 - app/test-sad/meson.build | 1 - app/test/Makefile | 2 -- doc/guides/contributing/coding_style.rst | 9 --------- doc/guides/rel_notes/release_20_05.rst | 6 ++++++ drivers/baseband/fpga_lte_fec/Makefile | 1 - drivers/baseband/fpga_lte_fec/meson.build | 1 - drivers/baseband/null/Makefile | 1 - drivers/baseband/null/meson.build | 1 - drivers/baseband/turbo_sw/Makefile | 1 - drivers/baseband/turbo_sw/meson.build | 1 - drivers/bus/dpaa/Makefile | 1 - drivers/bus/dpaa/meson.build | 2 -- drivers/bus/fslmc/Makefile | 1 - drivers/bus/fslmc/meson.build | 2 -- drivers/bus/ifpga/Makefile | 1 - drivers/bus/ifpga/meson.build | 2 -- drivers/bus/pci/Makefile | 4 ---- drivers/bus/pci/meson.build | 3 --- drivers/bus/vdev/Makefile | 1 - drivers/bus/vdev/meson.build | 2 -- drivers/bus/vmbus/Makefile | 1 - drivers/bus/vmbus/meson.build | 2 -- drivers/common/cpt/meson.build | 1 - drivers/common/dpaax/Makefile | 1 - drivers/common/dpaax/meson.build | 2 -- drivers/common/iavf/Makefile | 1 - drivers/common/iavf/meson.build | 2 -- drivers/common/mlx5/meson.build | 1 - drivers/common/octeontx2/Makefile | 1 - drivers/common/octeontx2/meson.build | 2 -- drivers/common/qat/Makefile | 1 - drivers/compress/isal/Makefile | 1 - drivers/compress/isal/meson.build | 2 -- drivers/compress/octeontx/Makefile | 1 - drivers/compress/octeontx/meson.build | 1 - drivers/compress/qat/meson.build | 1 - drivers/compress/zlib/Makefile | 1 - drivers/compress/zlib/meson.build | 2 -- drivers/crypto/aesni_gcm/Makefile | 1 - drivers/crypto/aesni_gcm/meson.build | 1 - drivers/crypto/aesni_mb/Makefile | 1 - drivers/crypto/aesni_mb/meson.build | 1 - drivers/crypto/armv8/Makefile | 1 - drivers/crypto/armv8/meson.build | 1 - drivers/crypto/caam_jr/Makefile | 2 -- drivers/crypto/caam_jr/meson.build | 2 -- drivers/crypto/dpaa2_sec/Makefile | 1 - drivers/crypto/dpaa2_sec/meson.build | 2 -- drivers/crypto/dpaa_sec/Makefile | 1 - drivers/crypto/dpaa_sec/meson.build | 2 -- drivers/crypto/kasumi/Makefile | 1 - drivers/crypto/kasumi/meson.build | 1 - drivers/crypto/nitrox/Makefile | 1 - drivers/crypto/nitrox/meson.build | 1 - drivers/crypto/octeontx/Makefile | 1 - drivers/crypto/octeontx/meson.build | 1 - drivers/crypto/octeontx2/Makefile | 1 - drivers/crypto/octeontx2/meson.build | 1 - drivers/crypto/openssl/Makefile | 1 - drivers/crypto/openssl/meson.build | 1 - drivers/crypto/snow3g/Makefile | 1 - drivers/crypto/snow3g/meson.build | 1 - drivers/crypto/zuc/Makefile | 1 - drivers/crypto/zuc/meson.build | 1 - drivers/event/dpaa/Makefile | 1 - drivers/event/dpaa/meson.build | 1 - drivers/event/dpaa2/Makefile | 3 --- drivers/event/dpaa2/meson.build | 1 - drivers/event/dsw/Makefile | 3 --- drivers/event/dsw/meson.build | 3 --- drivers/event/octeontx2/Makefile | 1 - drivers/event/octeontx2/meson.build | 2 -- drivers/event/opdl/Makefile | 1 - drivers/event/opdl/meson.build | 1 - drivers/mempool/bucket/Makefile | 1 - drivers/mempool/bucket/meson.build | 2 -- drivers/mempool/dpaa/Makefile | 3 --- drivers/mempool/dpaa/meson.build | 3 --- drivers/mempool/dpaa2/Makefile | 3 --- drivers/mempool/dpaa2/meson.build | 3 --- drivers/mempool/octeontx/Makefile | 1 - drivers/mempool/octeontx/meson.build | 2 -- drivers/mempool/octeontx2/Makefile | 4 +--- drivers/mempool/octeontx2/meson.build | 2 -- drivers/mempool/stack/Makefile | 1 - drivers/mempool/stack/meson.build | 2 -- drivers/meson.build | 7 +------ drivers/net/atlantic/Makefile | 1 - drivers/net/atlantic/meson.build | 2 -- drivers/net/avp/Makefile | 1 - drivers/net/avp/meson.build | 1 - drivers/net/axgbe/Makefile | 1 - drivers/net/axgbe/meson.build | 2 -- drivers/net/bnx2x/Makefile | 1 - drivers/net/bnx2x/meson.build | 1 - drivers/net/bonding/Makefile | 1 - drivers/net/bonding/meson.build | 1 - drivers/net/dpaa/Makefile | 3 --- drivers/net/dpaa/meson.build | 2 -- drivers/net/dpaa2/Makefile | 3 --- drivers/net/dpaa2/meson.build | 3 --- drivers/net/e1000/Makefile | 1 - drivers/net/e1000/base/meson.build | 3 --- drivers/net/e1000/meson.build | 2 -- drivers/net/ena/Makefile | 2 -- drivers/net/ena/meson.build | 1 - drivers/net/enetc/Makefile | 1 - drivers/net/enetc/meson.build | 1 - drivers/net/enic/Makefile | 2 -- drivers/net/enic/meson.build | 2 -- drivers/net/failsafe/Makefile | 1 - drivers/net/failsafe/meson.build | 2 -- drivers/net/fm10k/Makefile | 1 - drivers/net/fm10k/base/meson.build | 3 --- drivers/net/fm10k/meson.build | 2 -- drivers/net/hinic/base/meson.build | 2 +- drivers/net/hinic/meson.build | 2 +- drivers/net/hns3/Makefile | 1 - drivers/net/hns3/meson.build | 7 ------- drivers/net/i40e/Makefile | 1 - drivers/net/i40e/base/meson.build | 3 --- drivers/net/i40e/meson.build | 3 +-- drivers/net/iavf/Makefile | 2 +- drivers/net/iavf/meson.build | 2 -- drivers/net/ice/Makefile | 1 - drivers/net/ice/meson.build | 2 -- drivers/net/ionic/Makefile | 3 --- drivers/net/ipn3ke/Makefile | 1 - drivers/net/ipn3ke/meson.build | 2 -- drivers/net/ixgbe/Makefile | 1 - drivers/net/ixgbe/base/meson.build | 3 --- drivers/net/ixgbe/meson.build | 2 -- drivers/net/memif/Makefile | 7 ------- drivers/net/memif/meson.build | 8 -------- drivers/net/mlx4/Makefile | 1 - drivers/net/mlx4/meson.build | 1 - drivers/net/mlx5/Makefile | 3 --- drivers/net/mlx5/meson.build | 1 - drivers/net/netvsc/Makefile | 1 - drivers/net/netvsc/meson.build | 2 -- drivers/net/nfp/Makefile | 1 - drivers/net/nfp/meson.build | 2 -- drivers/net/octeontx/Makefile | 2 -- drivers/net/octeontx/base/meson.build | 3 --- drivers/net/octeontx/meson.build | 2 -- drivers/net/pfe/Makefile | 4 ---- drivers/net/pfe/meson.build | 5 ----- drivers/net/qede/Makefile | 1 - drivers/net/qede/base/meson.build | 3 --- drivers/net/qede/meson.build | 2 -- drivers/net/sfc/Makefile | 1 - drivers/net/sfc/base/meson.build | 3 --- drivers/net/sfc/meson.build | 2 -- drivers/net/softnic/Makefile | 1 - drivers/net/softnic/meson.build | 1 - drivers/net/tap/Makefile | 1 - drivers/net/tap/meson.build | 1 - drivers/net/thunderx/Makefile | 1 - drivers/net/thunderx/base/meson.build | 3 --- drivers/net/thunderx/meson.build | 1 - drivers/net/vdev_netvsc/Makefile | 1 - drivers/net/vdev_netvsc/meson.build | 2 -- drivers/net/virtio/Makefile | 1 - drivers/net/virtio/meson.build | 1 - drivers/net/vmxnet3/Makefile | 1 - drivers/net/vmxnet3/meson.build | 1 - drivers/raw/dpaa2_cmdif/Makefile | 1 - drivers/raw/dpaa2_cmdif/meson.build | 2 -- drivers/raw/dpaa2_qdma/Makefile | 1 - drivers/raw/dpaa2_qdma/meson.build | 2 -- drivers/raw/ifpga/Makefile | 1 - drivers/raw/ifpga/meson.build | 2 -- drivers/raw/ntb/Makefile | 1 - drivers/raw/ntb/meson.build | 1 - drivers/vdpa/ifc/Makefile | 1 - drivers/vdpa/ifc/meson.build | 1 - drivers/vdpa/mlx5/Makefile | 2 -- drivers/vdpa/mlx5/meson.build | 1 - lib/librte_bbdev/Makefile | 1 - lib/librte_bbdev/meson.build | 1 - lib/librte_bpf/Makefile | 1 - lib/librte_bpf/meson.build | 1 - lib/librte_cmdline/Makefile | 1 - lib/librte_cmdline/meson.build | 1 - lib/librte_compressdev/Makefile | 1 - lib/librte_compressdev/meson.build | 1 - lib/librte_cryptodev/Makefile | 1 - lib/librte_cryptodev/meson.build | 1 - lib/librte_eal/freebsd/Makefile | 1 - lib/librte_eal/linux/Makefile | 1 - lib/librte_eal/meson.build | 1 - lib/librte_ethdev/Makefile | 1 - lib/librte_ethdev/meson.build | 1 - lib/librte_eventdev/Makefile | 1 - lib/librte_eventdev/meson.build | 2 -- lib/librte_fib/Makefile | 1 - lib/librte_fib/meson.build | 1 - lib/librte_flow_classify/Makefile | 1 - lib/librte_flow_classify/meson.build | 1 - lib/librte_gso/meson.build | 2 +- lib/librte_hash/Makefile | 2 +- lib/librte_hash/meson.build | 3 --- lib/librte_ipsec/Makefile | 1 - lib/librte_ipsec/meson.build | 2 -- lib/librte_mbuf/Makefile | 1 - lib/librte_mbuf/meson.build | 2 -- lib/librte_mempool/Makefile | 4 ---- lib/librte_mempool/meson.build | 5 ----- lib/librte_net/Makefile | 1 - lib/librte_net/meson.build | 1 - lib/librte_pdump/Makefile | 1 - lib/librte_pdump/meson.build | 1 - lib/librte_pipeline/Makefile | 1 - lib/librte_pipeline/meson.build | 1 - lib/librte_power/Makefile | 1 - lib/librte_rcu/Makefile | 1 - lib/librte_rcu/meson.build | 2 -- lib/librte_rib/Makefile | 1 - lib/librte_rib/meson.build | 1 - lib/librte_ring/Makefile | 2 +- lib/librte_ring/meson.build | 3 --- lib/librte_stack/Makefile | 1 - lib/librte_stack/meson.build | 2 -- lib/librte_telemetry/Makefile | 1 - lib/librte_telemetry/meson.build | 1 - lib/librte_timer/Makefile | 1 - lib/librte_timer/meson.build | 1 - lib/librte_vhost/Makefile | 1 - lib/librte_vhost/meson.build | 1 - lib/meson.build | 5 +---- mk/rte.app.mk | 2 ++ mk/rte.lib.mk | 1 + 244 files changed, 20 insertions(+), 395 deletions(-)
app/meson.build +1 -5
@@ -26,7 +26,6 @@ default_cflags = machine_args foreach app:apps build = true name = app - allow_experimental_apis = false sources = [] includes = [] cflags = default_cflags
@@ -53,10 +52,7 @@ foreach app:apps link_libs = dpdk_static_libraries + dpdk_drivers endif - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - + cflags += '-DALLOW_EXPERIMENTAL_API' executable('dpdk-' + name, sources, c_args: cflags,
app/test-bbdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # APP = testbbdev -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
app/test-bbdev/meson.build +0 -1
@@ -5,7 +5,6 @@ sources = files('main.c', 'test_bbdev.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') -allow_experimental_apis = true deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') deps += ['pmd_bbdev_fpga_lte_fec']
app/test-compress-perf/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-compress-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-compress-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('comp_perf_options_parse.c', 'main.c', 'comp_perf_test_verify.c',
app/test-crypto-perf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-crypto-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-crypto-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('cperf_ops.c', 'cperf_options_parsing.c', 'cperf_test_common.c',
app/test-fib/Makefile +0 -1
@@ -9,7 +9,6 @@ APP = testfib CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDFLAGS += -lresolv
app/test-fib/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['fib', 'lpm', 'net']
app/test-pmd/Makefile +0 -1
@@ -10,7 +10,6 @@ ifeq ($(CONFIG_RTE_TEST_PMD),y) # APP = testpmd -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-deprecated-declarations
app/test-pmd/meson.build +0 -1
@@ -3,7 +3,6 @@ # override default name to drop the hyphen name = 'testpmd' -allow_experimental_apis = true cflags += '-Wno-deprecated-declarations' sources = files('cmdline.c', 'cmdline_flow.c',
app/test-sad/Makefile +0 -1
@@ -8,7 +8,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) APP = testsad CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # all source are stored in SRCS-y SRCS-y := main.c
app/test-sad/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['ipsec', 'net']
app/test/Makefile +0 -2
@@ -237,8 +237,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) LDLIBS += -lrte_ipsec endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
doc/guides/contributing/coding_style.rst +0 -9
@@ -842,12 +842,6 @@ sources The optional fields are: -allow_experimental_apis - **Default Value = false** - Used to allow the library to make use of APIs marked as experimental. - Set to ``true`` if the C files in the library call any functions - marked as experimental in any included header files. - build **Default Value = true** Used to optionally compile a library, based on its dependencies or
@@ -960,9 +954,6 @@ Meson Build File Contents - Drivers For drivers, the values are largely the same as for libraries. The variables supported are: -allow_experimental_apis - As above. - build As above.
doc/guides/rel_notes/release_20_05.rst +6 -0
@@ -62,6 +62,12 @@ New Features * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit. +* **Enable ALLOW_EXPERIMENTAL_API flag globally.** + + Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and + meson.build in app, lib and drivers instead enable ALLOW_EXPERIMENTAL_API + flag globally. + Removed Items -------------
drivers/baseband/fpga_lte_fec/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_fpga_lte_fec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/baseband/fpga_lte_fec/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2019 Intel Corporation deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci'] -allow_experimental_apis = true sources = files('fpga_lte_fec.c')
drivers/baseband/null/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_null.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/baseband/null/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2018 Luca Boccassi <[email protected]> deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_null.c')
drivers/baseband/turbo_sw/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_turbo_sw.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/baseband/turbo_sw/meson.build +0 -1
@@ -36,5 +36,4 @@ if dpdk_conf.has('RTE_BBDEV_SDK_AVX512') endif deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_turbo_software.c')
drivers/bus/dpaa/Makefile +0 -1
@@ -9,7 +9,6 @@ RTE_BUS_DPAA=$(RTE_SDK)/drivers/bus/dpaa # LIB = librte_bus_dpaa.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/bus/dpaa/meson.build +0 -2
@@ -19,8 +19,6 @@ sources = files('base/fman/fman.c', 'base/qbman/qman_driver.c', 'dpaa_bus.c') -allow_experimental_apis = true - if cc.has_argument('-Wno-cast-qual') cflags += '-Wno-cast-qual' endif
drivers/bus/fslmc/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_fslmc.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/bus/fslmc/meson.build +0 -2
@@ -22,6 +22,4 @@ sources = files('fslmc_bus.c', 'qbman/qbman_portal.c', 'qbman/qbman_debug.c') -allow_experimental_apis = true - includes += include_directories('mc', 'qbman/include', 'portal')
drivers/bus/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal
drivers/bus/ifpga/meson.build +0 -2
@@ -4,5 +4,3 @@ deps += ['pci', 'kvargs', 'rawdev'] install_headers('rte_bus_ifpga.h') sources = files('ifpga_common.c', 'ifpga_bus.c') - -allow_experimental_apis = true
drivers/bus/pci/Makefile +0 -4
@@ -8,7 +8,6 @@ EXPORT_MAP := rte_bus_pci_version.map CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
@@ -20,9 +19,6 @@ endif CFLAGS += -I$(RTE_SDK)/drivers/bus/pci/$(SYSTEM) CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common -# memseg walk is not part of stable API yet -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_pci -lrte_kvargs
drivers/bus/pci/meson.build +0 -3
@@ -16,7 +16,4 @@ else includes += include_directories('bsd') endif -# memseg walk is not part of stable API yet -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vdev/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_bus_vdev.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_bus_vdev_version.map
drivers/bus/vdev/meson.build +0 -2
@@ -5,6 +5,4 @@ sources = files('vdev.c', 'vdev_params.c') install_headers('rte_bus_vdev.h') -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vmbus/Makefile +0 -1
@@ -7,7 +7,6 @@ EXPORT_MAP := rte_bus_vmbus_version.map CFLAGS += -I$(SRCDIR) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
drivers/bus/vmbus/meson.build +0 -2
@@ -1,7 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause -allow_experimental_apis = true - install_headers('rte_bus_vmbus.h','rte_vmbus_reg.h') sources = files('vmbus_common.c',
drivers/common/cpt/meson.build +0 -1
@@ -6,4 +6,3 @@ sources = files('cpt_fpm_tables.c', deps = ['kvargs', 'pci', 'cryptodev'] includes += include_directories('../../crypto/octeontx') -allow_experimental_apis = true
drivers/common/dpaax/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_dpaax.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/dpaax/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 NXP -allow_experimental_apis = true - if not is_linux build = false reason = 'only supported on linux'
drivers/common/iavf/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_iavf.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/iavf/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('iavf_adminq.c', 'iavf_common.c', 'iavf_impl.c') if cc.has_argument('-Wno-pointer-to-int-cast')
drivers/common/mlx5/meson.build +0 -1
@@ -49,7 +49,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true deps += ['hash', 'pci', 'net', 'eal', 'kvargs'] sources = files( 'mlx5_devx_cmds.c',
drivers/common/octeontx2/Makefile +0 -1
@@ -13,7 +13,6 @@ CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/bus/pci -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/common/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources= files('otx2_dev.c', 'otx2_irq.c', 'otx2_mbox.c',
drivers/common/qat/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(QAT_COMPRESS_DIR) ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y) - CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_compressdev SRCS-y += qat_comp.c SRCS-y += qat_comp_pmd.c
drivers/compress/isal/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_isal_comp.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # external library dependencies LDLIBS += -lisal
drivers/compress/isal/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('isal_compress_pmd.c', 'isal_compress_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/compress/octeontx/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_octeontx_zip.a # build flags CFLAGS += $(WERROR_FLAGS) CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(RTE_SDK)/drivers/compress/octeontx/include # external library include paths
drivers/compress/octeontx/meson.build +0 -1
@@ -3,7 +3,6 @@ name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') -allow_experimental_apis = true includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] ext_deps += dep
drivers/compress/qat/meson.build +0 -1
@@ -3,7 +3,6 @@ # Add our sources files to the list -allow_experimental_apis = true qat_sources += files('qat_comp_pmd.c', 'qat_comp.c') qat_includes += include_directories('.')
drivers/compress/zlib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zlib.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zlib_version.map
drivers/compress/zlib/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('zlib_pmd.c', 'zlib_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/crypto/aesni_gcm/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_pmd_aesni_gcm.a # build flags CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) # versioning export map
drivers/crypto/aesni_gcm/meson.build +0 -1
@@ -20,6 +20,5 @@ else endif endif -allow_experimental_apis = true sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/aesni_mb/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_aesni_mb.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_aesni_mb_version.map
drivers/crypto/aesni_mb/meson.build +0 -1
@@ -22,5 +22,4 @@ else endif sources = files('rte_aesni_mb_pmd.c', 'rte_aesni_mb_pmd_ops.c') -allow_experimental_apis = true deps += ['bus_vdev']
drivers/crypto/armv8/Makefile +0 -1
@@ -24,7 +24,6 @@ EXPORT_MAP := rte_pmd_armv8_version.map # external library dependencies CFLAGS += -I$(ARMV8_CRYPTO_LIB_PATH) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -L$(ARMV8_CRYPTO_LIB_PATH) -lAArch64crypto LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_cryptodev
drivers/crypto/armv8/meson.build +0 -1
@@ -22,4 +22,3 @@ endif deps += ['bus_vdev'] sources = files('rte_armv8_pmd.c', 'rte_armv8_pmd_ops.c') -allow_experimental_apis = true
drivers/crypto/caam_jr/Makefile +0 -2
@@ -9,8 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_caam_jr.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -D _GNU_SOURCE CFLAGS += -O3
drivers/crypto/caam_jr/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('caam_jr_capabilities.c', 'caam_jr_uio.c', 'caam_jr.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include/') includes += include_directories('../../common/dpaax/') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/dpaa2_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa2_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/dpaa2_sec/meson.build +0 -2
@@ -10,6 +10,4 @@ deps += ['security', 'mempool_dpaa2'] sources = files('dpaa2_sec_dpseci.c', 'mc/dpseci.c') -allow_experimental_apis = true - includes += include_directories('mc', '../../common/dpaax', '../../common/dpaax/caamflib')
drivers/crypto/dpaa_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/dpaa_sec/meson.build +0 -2
@@ -9,8 +9,6 @@ endif deps += ['bus_dpaa', 'mempool_dpaa', 'security'] sources = files('dpaa_sec.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include') includes += include_directories('../../common/dpaax') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/kasumi/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_kasumi.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_kasumi_version.map
drivers/crypto/kasumi/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_kasumi_pmd.c', 'rte_kasumi_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/nitrox/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_nitrox.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_nitrox_version.map
drivers/crypto/nitrox/meson.build +0 -1
@@ -7,7 +7,6 @@ if not is_linux endif deps += ['bus_pci'] -allow_experimental_apis = true sources = files( 'nitrox_device.c', 'nitrox_hal.c',
drivers/crypto/octeontx/Makefile +0 -1
@@ -19,7 +19,6 @@ VPATH += $(RTE_SDK)/drivers/crypto/octeontx CFLAGS += -O3 CFLAGS += -I$(RTE_SDK)/drivers/common/cpt -CFLAGS += -DALLOW_EXPERIMENTAL_API # PMD code SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev.c
drivers/crypto/octeontx/meson.build +0 -1
@@ -9,7 +9,6 @@ deps += ['bus_pci'] deps += ['common_cpt'] name = 'octeontx_crypto' -allow_experimental_apis = true sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', 'otx_cryptodev_hw_access.c',
drivers/crypto/octeontx2/Makefile +0 -1
@@ -23,7 +23,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/crypto/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/crypto/octeontx2/meson.build +0 -1
@@ -12,7 +12,6 @@ deps += ['ethdev'] deps += ['security'] name = 'octeontx2_crypto' -allow_experimental_apis = true sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', 'otx2_cryptodev_hw_access.c',
drivers/crypto/openssl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_openssl.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_openssl_version.map
drivers/crypto/openssl/meson.build +0 -1
@@ -6,7 +6,6 @@ if not dep.found() build = false reason = 'missing dependency, "libcrypto"' endif -allow_experimental_apis = true deps += 'bus_vdev' sources = files('rte_openssl_pmd.c', 'rte_openssl_pmd_ops.c') ext_deps += dep
drivers/crypto/snow3g/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_snow3g.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_snow3g_version.map
drivers/crypto/snow3g/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_snow3g_pmd.c', 'rte_snow3g_pmd_ops.c') deps += ['bus_vdev', 'cryptodev']
drivers/crypto/zuc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zuc.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zuc_version.map
drivers/crypto/zuc/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_zuc_pmd.c', 'rte_zuc_pmd_ops.c') deps += ['bus_vdev']
drivers/event/dpaa/Makefile +0 -1
@@ -10,7 +10,6 @@ RTE_SDK_DPAA=$(RTE_SDK)/drivers/net/dpaa # LIB = librte_pmd_dpaa_event.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/event/dpaa/meson.build +0 -1
@@ -8,5 +8,4 @@ endif deps += ['pmd_dpaa', 'pmd_dpaa_sec'] sources = files('dpaa_eventdev.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa_sec/')
drivers/event/dpaa2/Makefile +0 -3
@@ -31,9 +31,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec # versioning export map EXPORT_MAP := rte_pmd_dpaa2_event_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # # all source are stored in SRCS-y #
drivers/event/dpaa2/meson.build +0 -1
@@ -10,5 +10,4 @@ sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa2_sec/')
drivers/event/dsw/Makefile +0 -3
@@ -11,9 +11,6 @@ ifneq ($(CONFIG_RTE_TOOLCHAIN_ICC),y) CFLAGS += -Wno-format-nonliteral endif -# Depends on rte_ring_elem_*() -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal LDLIBS += -lrte_mbuf LDLIBS += -lrte_mempool
drivers/event/dsw/meson.build +0 -3
@@ -6,6 +6,3 @@ if cc.has_argument('-Wno-format-nonliteral') cflags += '-Wno-format-nonliteral' endif sources = files('dsw_evdev.c', 'dsw_event.c', 'dsw_xstats.c') - -# Depends on rte_ring_elem_*() -allow_experimental_apis = true
drivers/event/octeontx2/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/event/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/event/octeontx2/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('otx2_worker.c', 'otx2_tim_worker.c' ) -allow_experimental_apis = true - extra_flags = [] # This integrated controller runs only on a arm64 machine, remove 32bit warnings if not dpdk_conf.get('RTE_ARCH_64')
drivers/event/opdl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_opdl_event.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_eventdev -lrte_kvargs LDLIBS += -lrte_bus_vdev -lrte_mbuf -lrte_mempool
drivers/event/opdl/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources = files( 'opdl_evdev.c', 'opdl_evdev_init.c',
drivers/mempool/bucket/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_mempool_bucket.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring
drivers/mempool/bucket/meson.build +0 -2
@@ -6,6 +6,4 @@ # This software was jointly developed between OKTET Labs (under contract # for Solarflare) and Solarflare Communications, Inc. -allow_experimental_apis = true - sources = files('rte_mempool_bucket.c')
drivers/mempool/dpaa/Makefile +0 -3
@@ -19,9 +19,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_mempool # versioning export map EXPORT_MAP := rte_mempool_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += dpaa_mempool.c
drivers/mempool/dpaa/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_dpaa'] sources = files('dpaa_mempool.c') - -# depends on dpaa bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/dpaa2/Makefile +0 -3
@@ -18,9 +18,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include # versioning export map EXPORT_MAP := rte_mempool_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL) += dpaa2_hw_mempool.c
drivers/mempool/dpaa2/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_fslmc'] sources = files('dpaa2_hw_mempool.c') - -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/octeontx/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_mempool_octeontx.a CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx/ -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_mempool_octeontx_version.map
drivers/mempool/octeontx/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Cavium, Inc -allow_experimental_apis = true - sources = files('octeontx_fpavf.c', 'rte_mempool_octeontx.c' )
drivers/mempool/octeontx2/Makefile +1 -3
@@ -23,8 +23,6 @@ CFLAGS += -diag-disable 2259 endif endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - EXPORT_MAP := rte_mempool_octeontx2_version.map #
@@ -32,7 +30,7 @@ EXPORT_MAP := rte_mempool_octeontx2_version.map # SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL) += \ otx2_mempool_ops.c \ - otx2_mempool.c \ + otx2_mempool.c \ otx2_mempool_irq.c \ otx2_mempool_debug.c
drivers/mempool/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources = files('otx2_mempool_ops.c', 'otx2_mempool.c', 'otx2_mempool_irq.c',
drivers/mempool/stack/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_mempool_stack.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Headers CFLAGS += -I$(RTE_SDK)/lib/librte_mempool
drivers/mempool/stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_mempool_stack.c') deps += ['stack']
drivers/meson.build +1 -6
@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endif
@@ -44,7 +44,6 @@ foreach class:dpdk_driver_classes reason = '<unknown reason>' # set if build == false to explain name = drv fmt_name = '' - allow_experimental_apis = false sources = [] objs = [] cflags = default_cflags
@@ -106,10 +105,6 @@ foreach class:dpdk_driver_classes dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) lib_name = driver_name_fmt.format(fmt_name) - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - dpdk_extra_ldflags += pkgconfig_extra_libs # generate pmdinfo sources by building a temporary
drivers/net/atlantic/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_atlantic.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_atlantic_version.map
drivers/net/atlantic/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Aquantia Corporation -allow_experimental_apis = true - sources = files( 'atl_rxtx.c', 'atl_ethdev.c',
drivers/net/avp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_avp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/avp/meson.build +0 -1
@@ -5,6 +5,5 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true sources = files('avp_ethdev.c') install_headers('rte_avp_common.h', 'rte_avp_fifo.h')
drivers/net/axgbe/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_axgbe.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_axgbe_version.map
drivers/net/axgbe/meson.build +0 -2
@@ -6,8 +6,6 @@ if not is_linux reason = 'only supported on linux' endif -allow_experimental_apis = true - sources = files('axgbe_ethdev.c', 'axgbe_dev.c', 'axgbe_mdio.c',
drivers/net/bnx2x/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_bnx2x.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -DZLIB_CONST -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lz LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
drivers/net/bnx2x/meson.build +0 -1
@@ -5,7 +5,6 @@ dep = dependency('zlib', required: false) build = dep.found() reason = 'missing dependency, "zlib"' ext_deps += dep -allow_experimental_apis = true cflags += '-DZLIB_CONST' sources = files('bnx2x.c', 'bnx2x_ethdev.c',
drivers/net/bonding/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_bond.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/bonding/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'bond' #, james bond :-) -allow_experimental_apis = true sources = files('rte_eth_bond_api.c', 'rte_eth_bond_pmd.c', 'rte_eth_bond_flow.c', 'rte_eth_bond_args.c', 'rte_eth_bond_8023ad.c', 'rte_eth_bond_alb.c')
drivers/net/dpaa/Makefile +0 -3
@@ -25,9 +25,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include EXPORT_MAP := rte_pmd_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
drivers/net/dpaa/meson.build +0 -2
@@ -14,6 +14,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -allow_experimental_apis = true - install_headers('rte_pmd_dpaa.h')
drivers/net/dpaa2/Makefile +0 -3
@@ -24,9 +24,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2 # versioning export map EXPORT_MAP := rte_pmd_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += base/dpaa2_hw_dpni.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_rxtx.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_ethdev.c
drivers/net/dpaa2/meson.build +0 -3
@@ -24,7 +24,4 @@ endif includes += include_directories('base', 'mc') -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2.h')
drivers/net/e1000/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_e1000.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/e1000/base/meson.build +0 -3
@@ -25,9 +25,6 @@ error_cflags = ['-Wno-uninitialized', '-Wno-unused-parameter', '-Wno-unused-variable', '-Wno-misleading-indentation', '-Wno-implicit-fallthrough'] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/e1000/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ena/Makefile +0 -2
@@ -12,8 +12,6 @@ CFLAGS += $(WERROR_FLAGS) -O2 INCLUDES :=-I$(SRCDIR) -I$(SRCDIR)/base/ena_defs -I$(SRCDIR)/base EXPORT_MAP := rte_pmd_ena_version.map -# rte_fbarray is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API VPATH += $(SRCDIR)/base #
drivers/net/ena/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('ena_ethdev.c', 'base/ena_com.c', 'base/ena_eth_com.c')
drivers/net/enetc/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_enetc.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_enetc_version.map SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_rxtx.c
drivers/net/enetc/meson.build +0 -1
@@ -11,4 +11,3 @@ sources = files('enetc_ethdev.c', 'enetc_rxtx.c') includes += include_directories('base') -allow_experimental_apis = true
drivers/net/enic/Makefile +0 -2
@@ -11,8 +11,6 @@ LIB = librte_pmd_enic.a EXPORT_MAP := rte_pmd_enic_version.map -# Experimental APIs used: rte_intr_ack -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/enic/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cisco Systems, Inc. -# Experimental APIs used: rte_intr_ack -cflags += ['-DALLOW_EXPERIMENTAL_API'] sources = files( 'base/vnic_cq.c', 'base/vnic_dev.c',
drivers/net/failsafe/Makefile +0 -1
@@ -27,7 +27,6 @@ endif # No exported include files # Basic CFLAGS: -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -std=gnu99 -Wextra CFLAGS += -O3 CFLAGS += -I.
drivers/net/failsafe/meson.build +0 -2
@@ -11,8 +11,6 @@ else cflags += '-DBSD' endif -allow_experimental_apis = true - sources = files('failsafe_args.c', 'failsafe.c', 'failsafe_eal.c',
drivers/net/fm10k/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_fm10k.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_fm10k_version.map
drivers/net/fm10k/base/meson.build +0 -3
@@ -16,9 +16,6 @@ error_cflags = ['-Wno-unused-parameter', '-Wno-unused-value', '-Wno-implicit-fallthrough' ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/fm10k/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/hinic/base/meson.build +1 -1
@@ -12,7 +12,7 @@ sources = [ 'hinic_pmd_niccfg.c', 'hinic_pmd_nicio.c', 'hinic_pmd_wq.c', - 'hinic_pmd_mbox.c', + 'hinic_pmd_mbox.c', ] extra_flags = []
drivers/net/hinic/meson.build +1 -1
@@ -8,7 +8,7 @@ sources = files( 'hinic_pmd_ethdev.c', 'hinic_pmd_rx.c', 'hinic_pmd_tx.c', - 'hinic_pmd_flow.c', + 'hinic_pmd_flow.c', ) includes += include_directories('base')
drivers/net/hns3/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_hns3.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Experimantal APIs: # - rte_mp_action_register # - rte_mp_action_unregister
drivers/net/hns3/meson.build +0 -7
@@ -27,11 +27,4 @@ sources = files('hns3_cmd.c', 'hns3_stats.c', 'hns3_mp.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_mp_action_register -# - rte_mp_action_unregister -# - rte_mp_reply -# - rte_mp_request_sync - deps += ['hash']
drivers/net/i40e/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_i40e.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -DPF_DRIVER -DVF_DRIVER -DINTEGRATED_VF CFLAGS += -DX722_A0_SUPPORT -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash
drivers/net/i40e/base/meson.build +0 -3
@@ -18,9 +18,6 @@ error_cflags = ['-Wno-sign-compare', '-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/i40e/meson.build +1 -2
@@ -4,8 +4,7 @@ cflags += ['-DPF_DRIVER', '-DVF_DRIVER', '-DINTEGRATED_VF', - '-DX722_A0_SUPPORT', - '-DALLOW_EXPERIMENTAL_API'] + '-DX722_A0_SUPPORT'] subdir('base') objs = [base_objs]
drivers/net/iavf/Makefile +1 -1
@@ -9,7 +9,7 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_iavf.a CFLAGS += -I$(RTE_SDK)/drivers/common/iavf -CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_pci
drivers/net/iavf/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-Wno-strict-aliasing'] -allow_experimental_apis = true - includes += include_directories('../../common/iavf') deps += ['common_iavf']
drivers/net/ice/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_ice.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_ethdev -lrte_kvargs LDLIBS += -lrte_bus_pci -lrte_mempool -lrte_hash
drivers/net/ice/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ionic/Makefile +0 -3
@@ -8,9 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ionic.a -# Required to use rte_eth_dev_create and rte_eth_dev_destroy -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/ipn3ke/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_pmd_ipn3ke.a # rte_eth_dev_destroy() # rte_eth_switch_domain_free() # -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/net/ipn3ke/meson.build +0 -2
@@ -19,8 +19,6 @@ if not dep.found() subdir_done() endif -allow_experimental_apis = true - includes += include_directories('../../raw/ifpga') sources += files('ipn3ke_ethdev.c',
drivers/net/ixgbe/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ixgbe.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/ixgbe/base/meson.build +0 -3
@@ -22,9 +22,6 @@ error_cflags = ['-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/ixgbe/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/memif/Makefile +0 -7
@@ -12,13 +12,6 @@ EXPORT_MAP := rte_pmd_memif_version.map CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool LDLIBS += -lrte_ethdev -lrte_kvargs -lrte_net LDLIBS += -lrte_hash
drivers/net/memif/meson.build +0 -8
@@ -9,12 +9,4 @@ endif sources = files('rte_eth_memif.c', 'memif_socket.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments - deps += ['hash']
drivers/net/mlx4/Makefile +0 -1
@@ -38,7 +38,6 @@ CFLAGS += -D_BSD_SOURCE CFLAGS += -D_DEFAULT_SOURCE CFLAGS += -D_XOPEN_SOURCE=600 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y) CFLAGS += -DMLX4_GLUE='"$(LIB_GLUE)"' CFLAGS += -DMLX4_GLUE_VERSION='"$(LIB_GLUE_VERSION)"'
drivers/net/mlx4/meson.build +0 -1
@@ -50,7 +50,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true sources = files( 'mlx4.c', 'mlx4_ethdev.c',
drivers/net/mlx5/Makefile +0 -3
@@ -56,9 +56,6 @@ CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG. ifeq ($(DEBUG),1)
drivers/net/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux subdir_done() endif -allow_experimental_apis = true deps += ['hash', 'common_mlx5'] sources = files( 'mlx5.c',
drivers/net/netvsc/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_netvsc.a CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_netvsc_version.map
drivers/net/netvsc/meson.build +0 -2
@@ -6,5 +6,3 @@ reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') deps += ['bus_vmbus' ] - -allow_experimental_apis = true
drivers/net/nfp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_nfp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/nfp/meson.build +0 -2
@@ -18,5 +18,3 @@ sources = files('nfpcore/nfp_cpp_pcie_ops.c', 'nfpcore/nfp_nsp_eth.c', 'nfpcore/nfp_hwinfo.c', 'nfp_net.c') - -allow_experimental_apis = true
drivers/net/octeontx/Makefile +0 -2
@@ -42,8 +42,6 @@ else CFLAGS_octeontx_rxtx.o += -O3 -Ofast endif -CFLAGS_octeontx_ethdev.o += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_common_octeontx LDLIBS += -lrte_mempool_octeontx
drivers/net/octeontx/base/meson.build +0 -3
@@ -14,9 +14,6 @@ foreach d: depends endforeach c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif base_lib = static_library('octeontx_base', sources, c_args: c_args, dependencies: static_objs,
drivers/net/octeontx/meson.build +0 -2
@@ -8,8 +8,6 @@ sources = files('octeontx_rxtx.c', 'octeontx_ethdev.c' ) -allow_experimental_apis = true - deps += ['mempool_octeontx', 'eventdev'] includes += include_directories('base')
drivers/net/pfe/Makefile +0 -4
@@ -15,10 +15,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/net/pfe/base/ CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax EXPORT_MAP := rte_pmd_pfe_version.map -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -CFLAGS += -DALLOW_EXPERIMENTAL_API # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_PFE_PMD) += pfe_ethdev.c
drivers/net/pfe/meson.build +0 -5
@@ -15,9 +15,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -allow_experimental_apis = true - includes += include_directories('base')
drivers/net/qede/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_qede.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/qede/base/meson.build +0 -3
@@ -45,9 +45,6 @@ error_cflags = [ '-Wno-pointer-bool-conversion', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/qede/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/sfc/Makefile +0 -1
@@ -13,7 +13,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_sfc_efx.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/sfc/base/meson.build +0 -3
@@ -63,9 +63,6 @@ extra_flags = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: extra_flags if cc.has_argument(flag) c_args += flag
drivers/net/sfc/meson.build +0 -2
@@ -11,8 +11,6 @@ if arch_subdir != 'x86' or not dpdk_conf.get('RTE_ARCH_64') reason = 'only supported on x86_64' endif -allow_experimental_apis = true - extra_flags = [] # Strict-aliasing rules are violated by rte_eth_link to uint64_t casts
drivers/net/softnic/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_softnic.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_pipeline -lrte_port -lrte_table
drivers/net/softnic/meson.build +0 -1
@@ -5,7 +5,6 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true install_headers('rte_eth_softnic.h') sources = files('rte_eth_softnic_tm.c', 'rte_eth_softnic.c',
drivers/net/tap/Makefile +0 -1
@@ -20,7 +20,6 @@ CFLAGS += -O3 CFLAGS += -I$(SRCDIR) CFLAGS += -I. CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_vdev -lrte_gso
drivers/net/tap/meson.build +0 -1
@@ -39,7 +39,6 @@ args = [ 'TCA_ACT_BPF_FD' ], ] config = configuration_data() -allow_experimental_apis = true foreach arg:args config.set(arg[0], cc.has_header_symbol(arg[1], arg[2])) endforeach
drivers/net/thunderx/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_thunderx_nicvf.a CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/thunderx/base/meson.build +0 -3
@@ -8,9 +8,6 @@ sources = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif base_lib = static_library('nicvf_base', sources, c_args: c_args, dependencies: static_rte_ethdev
drivers/net/thunderx/meson.build +0 -1
@@ -4,7 +4,6 @@ subdir('base') objs = [base_objs] -allow_experimental_apis = true sources = files('nicvf_rxtx.c', 'nicvf_ethdev.c', 'nicvf_svf.c'
drivers/net/vdev_netvsc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_vdev_netvsc.a EXPORT_MAP := rte_pmd_vdev_netvsc_version.map # Additional compilation flags. -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += -g CFLAGS += -Wall -Wextra
drivers/net/vdev_netvsc/meson.build +0 -2
@@ -7,8 +7,6 @@ if not is_linux endif sources = files('vdev_netvsc.c') -allow_experimental_apis = true - cflags_options = [ '-D_BSD_SOURCE', '-D_DEFAULT_SOURCE',
drivers/net/virtio/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_virtio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/virtio/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources += files('virtio_ethdev.c', 'virtio_pci.c', 'virtio_rxtx.c',
drivers/net/vmxnet3/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_vmxnet3_uio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/vmxnet3/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources += files( 'vmxnet3_ethdev.c', 'vmxnet3_rxtx.c',
drivers/raw/dpaa2_cmdif/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_cmdif.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_cmdif/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_cmdif.h')
drivers/raw/dpaa2_qdma/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_qdma.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_qdma/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_qdma.h')
drivers/raw/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/raw/ifpga/meson.build +0 -2
@@ -23,5 +23,3 @@ sources = files('ifpga_rawdev.c') includes += include_directories('base') includes += include_directories('../../net/ipn3ke') includes += include_directories('../../net/i40e') - -allow_experimental_apis = true
drivers/raw/ntb/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ntb.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
drivers/raw/ntb/meson.build +0 -1
@@ -6,4 +6,3 @@ deps += ['rawdev', 'mbuf', 'mempool', sources = files('ntb.c', 'ntb_hw_intel.c') install_headers('rte_pmd_ntb.h') -allow_experimental_apis = true
drivers/vdpa/ifc/Makefile +0 -1
@@ -14,7 +14,6 @@ LDLIBS += -lrte_kvargs CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # # Add extra flags for base driver source files to disable warnings in them
drivers/vdpa/ifc/meson.build +0 -1
@@ -3,7 +3,6 @@ build = dpdk_conf.has('RTE_LIBRTE_VHOST') reason = 'missing dependency, DPDK vhost library' -allow_experimental_apis = true sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') deps += 'vhost'
drivers/vdpa/mlx5/Makefile +0 -2
@@ -35,8 +35,6 @@ LDLIBS += -lrte_eal -lrte_vhost -lrte_kvargs -lrte_pci -lrte_bus_pci -lrte_sched CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_vdpa_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG.
drivers/vdpa/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux endif fmt_name = 'mlx5_vdpa' -allow_experimental_apis = true deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'bus_pci', 'eal', 'sched'] sources = files( 'mlx5_vdpa.c',
lib/librte_bbdev/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_bbdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf
lib/librte_bbdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_bbdev.c') headers = files('rte_bbdev.h', 'rte_bbdev_pmd.h',
lib/librte_bpf/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_bpf.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_net -lrte_eal LDLIBS += -lrte_mempool -lrte_ring LDLIBS += -lrte_mbuf -lrte_ethdev
lib/librte_bpf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('bpf.c', 'bpf_exec.c', 'bpf_load.c',
lib/librte_cmdline/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_cmdline.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_cmdline_version.map
lib/librte_cmdline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('cmdline.c', 'cmdline_cirbuf.c', 'cmdline_parse.c',
lib/librte_compressdev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_compressdev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_kvargs # library source files
lib/librte_compressdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('rte_compressdev.c', 'rte_compressdev_pmd.c', 'rte_comp.c')
lib/librte_cryptodev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_cryptodev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring -lrte_mbuf LDLIBS += -lrte_kvargs
lib/librte_cryptodev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_cryptodev.c', 'rte_cryptodev_pmd.c') headers = files('rte_cryptodev.h', 'rte_cryptodev_pmd.h',
lib/librte_eal/freebsd/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_eal/linux/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_eal/meson.build +0 -1
@@ -11,7 +11,6 @@ subdir(exec_env) subdir(arch_subdir) -allow_experimental_apis = true deps += 'kvargs' if dpdk_conf.has('RTE_USE_LIBBSD') ext_deps += libbsd
lib/librte_ethdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_ethdev.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_net -lrte_eal -lrte_mempool -lrte_ring
lib/librte_ethdev/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'ethdev' -allow_experimental_apis = true sources = files('ethdev_private.c', 'ethdev_profile.c', 'rte_class_eth.c',
lib/librte_eventdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_eventdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
lib/librte_eventdev/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - if is_linux cflags += '-DLINUX' else
lib/librte_fib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_fib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_rib EXPORT_MAP := rte_fib_version.map
lib/librte_fib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_fib.c', 'rte_fib6.c', 'dir24_8.c', 'trie.c') headers = files('rte_fib.h', 'rte_fib6.h') deps += ['rib']
lib/librte_flow_classify/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_flow_classify.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
lib/librte_flow_classify/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_flow_classify.c', 'rte_flow_classify_parse.c') headers = files('rte_flow_classify.h') deps += ['net', 'table']
lib/librte_gso/meson.build +1 -1
@@ -2,6 +2,6 @@ # Copyright(c) 2017 Intel Corporation sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c', - 'gso_tunnel_tcp4.c', 'rte_gso.c') + 'gso_tunnel_tcp4.c', 'rte_gso.c') headers = files('rte_gso.h') deps += ['ethdev']
lib/librte_hash/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_hash.a -CFLAGS += -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) LDLIBS += -lrte_eal -lrte_ring
lib/librte_hash/meson.build +0 -3
@@ -10,6 +10,3 @@ headers = files('rte_crc_arm64.h', sources = files('rte_cuckoo_hash.c', 'rte_fbk_hash.c') deps += ['ring'] - -# rte ring reset is not yet part of stable API -allow_experimental_apis = true
lib/librte_ipsec/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_ipsec.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_net LDLIBS += -lrte_cryptodev -lrte_security -lrte_hash
lib/librte_ipsec/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - sources = files('esp_inb.c', 'esp_outb.c', 'sa.c', 'ses.c', 'ipsec_sad.c') headers = files('rte_ipsec.h', 'rte_ipsec_group.h', 'rte_ipsec_sa.h', 'rte_ipsec_sad.h')
lib/librte_mbuf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mbuf.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool
lib/librte_mbuf/meson.build +0 -2
@@ -7,5 +7,3 @@ headers = files('rte_mbuf.h', 'rte_mbuf_core.h', 'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h', 'rte_mbuf_dyn.h') deps += ['mempool'] - -allow_experimental_apis = true
lib/librte_mempool/Makefile +0 -4
@@ -7,14 +7,10 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mempool.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ring EXPORT_MAP := rte_mempool_version.map -# memseg walk is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool.c SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool_ops.c
lib/librte_mempool/meson.build +0 -5
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - extra_flags = [] foreach flag: extra_flags
@@ -15,6 +13,3 @@ sources = files('rte_mempool.c', 'rte_mempool_ops.c', 'rte_mempool_ops_default.c') headers = files('rte_mempool.h') deps += ['ring'] - -# memseg walk is not yet part of stable API -allow_experimental_apis = true
lib/librte_net/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_net.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_mbuf -lrte_eal -lrte_mempool
lib/librte_net/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true headers = files('rte_ip.h', 'rte_tcp.h', 'rte_udp.h',
lib/librte_pdump/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_pdump.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_ethdev
lib/librte_pdump/meson.build +0 -1
@@ -3,5 +3,4 @@ sources = files('rte_pdump.c') headers = files('rte_pdump.h') -allow_experimental_apis = true deps += ['ethdev']
lib/librte_pipeline/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pipeline.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_table
lib/librte_pipeline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_pipeline.c', 'rte_port_in_action.c', 'rte_table_action.c') headers = files('rte_pipeline.h', 'rte_port_in_action.h', 'rte_table_action.h') deps += ['port', 'table', 'meter', 'sched', 'cryptodev']
lib/librte_power/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_power.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing LDLIBS += -lrte_eal -lrte_timer
lib/librte_rcu/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_rcu.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_rcu/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Arm Limited -allow_experimental_apis = true - sources = files('rte_rcu_qsbr.c') headers = files('rte_rcu_qsbr.h')
lib/librte_rib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_rib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool EXPORT_MAP := rte_rib_version.map
lib/librte_rib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_rib.c', 'rte_rib6.c') headers = files('rte_rib.h', 'rte_rib6.h') deps += ['mempool']
lib/librte_ring/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_ring.a -CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal EXPORT_MAP := rte_ring_version.map
lib/librte_ring/meson.build +0 -3
@@ -6,6 +6,3 @@ headers = files('rte_ring.h', 'rte_ring_elem.h', 'rte_ring_c11_mem.h', 'rte_ring_generic.h') - -# rte_ring_create_elem and rte_ring_get_memsize_elem are experimental -allow_experimental_apis = true
lib/librte_stack/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_stack.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal EXPORT_MAP := rte_stack_version.map
lib/librte_stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_stack.c', 'rte_stack_std.c', 'rte_stack_lf.c') headers = files('rte_stack.h', 'rte_stack_std.h',
lib/librte_telemetry/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_telemetry.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ethdev LDLIBS += -lrte_metrics
lib/librte_telemetry/meson.build +0 -1
@@ -4,7 +4,6 @@ sources = files('rte_telemetry.c', 'rte_telemetry_parser.c', 'rte_telemetry_parser_test.c') headers = files('rte_telemetry.h', 'rte_telemetry_internal.h', 'rte_telemetry_parser.h') deps += ['metrics', 'ethdev'] -cflags += '-DALLOW_EXPERIMENTAL_API' jansson = dependency('jansson', required: false) if jansson.found()
lib/librte_timer/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_timer.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_timer/meson.build +0 -1
@@ -3,4 +3,3 @@ sources = files('rte_timer.c') headers = files('rte_timer.h') -allow_experimental_apis = true
lib/librte_vhost/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_vhost.a EXPORT_MAP := rte_vhost_version.map -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 CFLAGS += -I vhost_user CFLAGS += -fno-strict-aliasing
lib/librte_vhost/meson.build +0 -1
@@ -17,7 +17,6 @@ elif (toolchain == 'icc' and cc.version().version_compare('>=16.0.0')) endif dpdk_conf.set('RTE_LIBRTE_VHOST_POSTCOPY', cc.has_header('linux/userfaultfd.h')) -allow_experimental_apis = true cflags += '-fno-strict-aliasing' sources = files('fd_man.c', 'iotlb.c', 'socket.c', 'vdpa.c', 'vhost.c', 'vhost_user.c',
lib/meson.build +1 -4
@@ -47,7 +47,6 @@ foreach l:libraries build = true reason = '<unknown reason>' # set if build == false to explain why name = l - allow_experimental_apis = false use_function_versioning = false sources = [] headers = []
@@ -98,9 +97,7 @@ foreach l:libraries static_dep = shared_dep else - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif + cflags += '-DALLOW_EXPERIMENTAL_API' if use_function_versioning cflags += '-DRTE_USE_FUNCTION_VERSIONING' endif
mk/rte.app.mk +2 -0
@@ -27,6 +27,8 @@ LDFLAGS += --as-needed # default path for libs _LDLIBS-y += -L$(RTE_SDK_BIN)/lib +CFLAGS += -DALLOW_EXPERIMENTAL_API + # # Order is important: from higher level to lower level #
mk/rte.lib.mk +1 -0
@@ -34,6 +34,7 @@ _INSTALL = $(INSTALL-FILES-y) $(RTE_OUTPUT)/lib/$(LIB) _CLEAN = doclean LDLIBS += $(EXECENV_LDLIBS-y) +CFLAGS += -DALLOW_EXPERIMENTAL_API .PHONY: all all: install
--
2.17.1
Re: [dpdk-dev] [PATCH v3] build: enable allow experimental API flag globally
Quoted 3 lines · On Fri, Apr 3, 2020 at 4:20 PM <[email protected]> wrote:
Remove setting
ALLOW_EXPERIMENTAL_APIindividually for eachMakefileand meson.build in app, lib and drivers instead enableALLOW_EXPERIMENTAL_APIflag globally.
This change does not enable the flag globally.
Quoted 6 lines
This changes reduces the clutter across the project while still maintaining the functionality of
ALLOW_EXPERIMENTAL_APIi.e. warning external applications about experimental API usage.Signed-off-by Pavan Nikhilesh <[email protected]>Acked-by Hemant Agrawal <[email protected]>
[snip]
Quoted 14 lines
app/meson.build +0
-1@@ -26,7 +26,6 @@ default_cflags = machine_args foreach app:apps build = true name = app - allow_experimental_apis = false sources = [] includes = [] cflags = default_cflags@@ -53,10 +52,7 @@ foreach app:apps link_libs = dpdk_static_libraries + dpdk_drivers
app/meson.build foreach app:apps · line 58
Quoted 10 lines
app/meson.build +1
-4endif - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - + cflags += '-DALLOW_EXPERIMENTAL_API' executable('dpdk-' + name, sources, c_args: cflags,
Please apply the same logic in app/ than for drivers/. This will spare us the special app/test/meson.build thing, which can be removed too.
[snip]
Quoted 5 lines
doc/guides/rel_notes/release_20_05.rst +0
-0
doc/guides/rel_notes/release_20_05.rst New Features · line 70
Quoted 9 lines
doc/guides/rel_notes/release_20_05.rst +6
-0@@ -62,6 +62,12 @@ New Features * Added support for matching on IPv4 Time To Live and IPv6 Hop Limit. +* **Enable ALLOW_EXPERIMENTAL_API flag globally.** + + Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and + meson.build in app, lib and drivers instead enable ALLOW_EXPERIMENTAL_API + flag globally. +
Reading this and the sections we have, it does not fit here. This is not a new feature.
This change only affects DPDK contributors, so let's just drop the release notes update.
Quoted 3 lines
doc/guides/rel_notes/release_20_05.rst +0
-0Removed Items -------------
[snip]
Quoted 13 lines
lib/meson.build +0
-1@@ -47,7 +47,6 @@ foreach l:libraries build = true reason = '<unknown reason>' # set if build == false to explain why name = l - allow_experimental_apis = false use_function_versioning = false sources = [] headers = []
lib/meson.build foreach l:libraries · line 103
Quoted 10 lines
lib/meson.build +1
-3@@ -98,9 +97,7 @@ foreach l:libraries static_dep = shared_dep else - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif + cflags += '-DALLOW_EXPERIMENTAL_API' if use_function_versioning cflags += '-DRTE_USE_FUNCTION_VERSIONING' endif
Ditto, apply same logic than drivers/meson.build
Thanks.
Signature · 1 line
David Marchand
PATCH v4 1/1 build: enable allow experimental API flag
In reply to [email protected]From: Pavan Nikhilesh <[email protected]>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and meson.build instead enable ALLOW_EXPERIMENTAL_API flag across app, lib and drivers.
This changes reduces the clutter across the project while still maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning external applications about experimental API usage.
---
Based on discussion at
http://mails.dpdk.org/archives/dev/2020-April/161527.html
v4 Changes:
- Add -DALLOW_EXPERIMENTAL_API to default_cflag which removes the need for adding it in every loop iteration.
- Remove release notes as it is NA.
v3 Changes:
- fixup stray allow_experimental_api flags.
- squash meson and make changes together.
- remove allow_experimental_api flag from base libs of various drivers.
v2 Changes:
- Remove comments containing experimental API list.
app/meson.build | 7 +------ app/test-bbdev/Makefile | 1 - app/test-bbdev/meson.build | 1 - app/test-compress-perf/Makefile | 1 - app/test-compress-perf/meson.build | 1 - app/test-crypto-perf/Makefile | 1 - app/test-crypto-perf/meson.build | 1 - app/test-fib/Makefile | 1 - app/test-fib/meson.build | 1 - app/test-pmd/Makefile | 1 - app/test-pmd/meson.build | 1 - app/test-sad/Makefile | 1 - app/test-sad/meson.build | 1 - app/test/Makefile | 2 -- app/test/meson.build | 2 +- doc/guides/contributing/coding_style.rst | 9 --------- drivers/baseband/fpga_lte_fec/Makefile | 1 - drivers/baseband/fpga_lte_fec/meson.build | 1 - drivers/baseband/null/Makefile | 1 - drivers/baseband/null/meson.build | 1 - drivers/baseband/turbo_sw/Makefile | 1 - drivers/baseband/turbo_sw/meson.build | 1 - drivers/bus/dpaa/Makefile | 1 - drivers/bus/dpaa/meson.build | 2 -- drivers/bus/fslmc/Makefile | 1 - drivers/bus/fslmc/meson.build | 2 -- drivers/bus/ifpga/Makefile | 1 - drivers/bus/ifpga/meson.build | 2 -- drivers/bus/pci/Makefile | 4 ---- drivers/bus/pci/meson.build | 3 --- drivers/bus/vdev/Makefile | 1 - drivers/bus/vdev/meson.build | 2 -- drivers/bus/vmbus/Makefile | 1 - drivers/bus/vmbus/meson.build | 2 -- drivers/common/cpt/meson.build | 1 - drivers/common/dpaax/Makefile | 1 - drivers/common/dpaax/meson.build | 2 -- drivers/common/iavf/Makefile | 1 - drivers/common/iavf/meson.build | 2 -- drivers/common/mlx5/meson.build | 1 - drivers/common/octeontx2/Makefile | 1 - drivers/common/octeontx2/meson.build | 2 -- drivers/common/qat/Makefile | 1 - drivers/compress/isal/Makefile | 1 - drivers/compress/isal/meson.build | 2 -- drivers/compress/octeontx/Makefile | 1 - drivers/compress/octeontx/meson.build | 1 - drivers/compress/qat/meson.build | 1 - drivers/compress/zlib/Makefile | 1 - drivers/compress/zlib/meson.build | 2 -- drivers/crypto/aesni_gcm/Makefile | 1 - drivers/crypto/aesni_gcm/meson.build | 1 - drivers/crypto/aesni_mb/Makefile | 1 - drivers/crypto/aesni_mb/meson.build | 1 - drivers/crypto/armv8/Makefile | 1 - drivers/crypto/armv8/meson.build | 1 - drivers/crypto/caam_jr/Makefile | 2 -- drivers/crypto/caam_jr/meson.build | 2 -- drivers/crypto/dpaa2_sec/Makefile | 1 - drivers/crypto/dpaa2_sec/meson.build | 2 -- drivers/crypto/dpaa_sec/Makefile | 1 - drivers/crypto/dpaa_sec/meson.build | 2 -- drivers/crypto/kasumi/Makefile | 1 - drivers/crypto/kasumi/meson.build | 1 - drivers/crypto/nitrox/Makefile | 1 - drivers/crypto/nitrox/meson.build | 1 - drivers/crypto/octeontx/Makefile | 1 - drivers/crypto/octeontx/meson.build | 1 - drivers/crypto/octeontx2/Makefile | 1 - drivers/crypto/octeontx2/meson.build | 1 - drivers/crypto/openssl/Makefile | 1 - drivers/crypto/openssl/meson.build | 1 - drivers/crypto/snow3g/Makefile | 1 - drivers/crypto/snow3g/meson.build | 1 - drivers/crypto/zuc/Makefile | 1 - drivers/crypto/zuc/meson.build | 1 - drivers/event/dpaa/Makefile | 1 - drivers/event/dpaa/meson.build | 1 - drivers/event/dpaa2/Makefile | 3 --- drivers/event/dpaa2/meson.build | 1 - drivers/event/dsw/Makefile | 3 --- drivers/event/dsw/meson.build | 3 --- drivers/event/octeontx2/Makefile | 1 - drivers/event/octeontx2/meson.build | 2 -- drivers/event/opdl/Makefile | 1 - drivers/event/opdl/meson.build | 1 - drivers/mempool/bucket/Makefile | 1 - drivers/mempool/bucket/meson.build | 2 -- drivers/mempool/dpaa/Makefile | 3 --- drivers/mempool/dpaa/meson.build | 3 --- drivers/mempool/dpaa2/Makefile | 3 --- drivers/mempool/dpaa2/meson.build | 3 --- drivers/mempool/octeontx/Makefile | 1 - drivers/mempool/octeontx/meson.build | 2 -- drivers/mempool/octeontx2/Makefile | 4 +--- drivers/mempool/octeontx2/meson.build | 2 -- drivers/mempool/stack/Makefile | 1 - drivers/mempool/stack/meson.build | 2 -- drivers/meson.build | 7 +------ drivers/net/atlantic/Makefile | 1 - drivers/net/atlantic/meson.build | 2 -- drivers/net/avp/Makefile | 1 - drivers/net/avp/meson.build | 1 - drivers/net/axgbe/Makefile | 1 - drivers/net/axgbe/meson.build | 2 -- drivers/net/bnx2x/Makefile | 1 - drivers/net/bnx2x/meson.build | 1 - drivers/net/bonding/Makefile | 1 - drivers/net/bonding/meson.build | 1 - drivers/net/dpaa/Makefile | 3 --- drivers/net/dpaa/meson.build | 2 -- drivers/net/dpaa2/Makefile | 3 --- drivers/net/dpaa2/meson.build | 3 --- drivers/net/e1000/Makefile | 1 - drivers/net/e1000/base/meson.build | 3 --- drivers/net/e1000/meson.build | 2 -- drivers/net/ena/Makefile | 2 -- drivers/net/ena/meson.build | 1 - drivers/net/enetc/Makefile | 1 - drivers/net/enetc/meson.build | 1 - drivers/net/enic/Makefile | 2 -- drivers/net/enic/meson.build | 2 -- drivers/net/failsafe/Makefile | 1 - drivers/net/failsafe/meson.build | 2 -- drivers/net/fm10k/Makefile | 1 - drivers/net/fm10k/base/meson.build | 3 --- drivers/net/fm10k/meson.build | 2 -- drivers/net/hinic/base/meson.build | 2 +- drivers/net/hinic/meson.build | 2 +- drivers/net/hns3/Makefile | 1 - drivers/net/hns3/meson.build | 7 ------- drivers/net/i40e/Makefile | 1 - drivers/net/i40e/base/meson.build | 3 --- drivers/net/i40e/meson.build | 3 +-- drivers/net/iavf/Makefile | 2 +- drivers/net/iavf/meson.build | 2 -- drivers/net/ice/Makefile | 1 - drivers/net/ice/meson.build | 2 -- drivers/net/ionic/Makefile | 3 --- drivers/net/ipn3ke/Makefile | 1 - drivers/net/ipn3ke/meson.build | 2 -- drivers/net/ixgbe/Makefile | 1 - drivers/net/ixgbe/base/meson.build | 3 --- drivers/net/ixgbe/meson.build | 2 -- drivers/net/memif/Makefile | 7 ------- drivers/net/memif/meson.build | 8 -------- drivers/net/mlx4/Makefile | 1 - drivers/net/mlx4/meson.build | 1 - drivers/net/mlx5/Makefile | 3 --- drivers/net/mlx5/meson.build | 1 - drivers/net/netvsc/Makefile | 1 - drivers/net/netvsc/meson.build | 2 -- drivers/net/nfp/Makefile | 1 - drivers/net/nfp/meson.build | 2 -- drivers/net/octeontx/Makefile | 2 -- drivers/net/octeontx/base/meson.build | 3 --- drivers/net/octeontx/meson.build | 2 -- drivers/net/pfe/Makefile | 4 ---- drivers/net/pfe/meson.build | 5 ----- drivers/net/qede/Makefile | 1 - drivers/net/qede/base/meson.build | 3 --- drivers/net/qede/meson.build | 2 -- drivers/net/sfc/Makefile | 1 - drivers/net/sfc/base/meson.build | 3 --- drivers/net/sfc/meson.build | 2 -- drivers/net/softnic/Makefile | 1 - drivers/net/softnic/meson.build | 1 - drivers/net/tap/Makefile | 1 - drivers/net/tap/meson.build | 1 - drivers/net/thunderx/Makefile | 1 - drivers/net/thunderx/base/meson.build | 3 --- drivers/net/thunderx/meson.build | 1 - drivers/net/vdev_netvsc/Makefile | 1 - drivers/net/vdev_netvsc/meson.build | 2 -- drivers/net/virtio/Makefile | 1 - drivers/net/virtio/meson.build | 1 - drivers/net/vmxnet3/Makefile | 1 - drivers/net/vmxnet3/meson.build | 1 - drivers/raw/dpaa2_cmdif/Makefile | 1 - drivers/raw/dpaa2_cmdif/meson.build | 2 -- drivers/raw/dpaa2_qdma/Makefile | 1 - drivers/raw/dpaa2_qdma/meson.build | 2 -- drivers/raw/ifpga/Makefile | 1 - drivers/raw/ifpga/meson.build | 2 -- drivers/raw/ntb/Makefile | 1 - drivers/raw/ntb/meson.build | 1 - drivers/vdpa/ifc/Makefile | 1 - drivers/vdpa/ifc/meson.build | 1 - drivers/vdpa/mlx5/Makefile | 2 -- drivers/vdpa/mlx5/meson.build | 1 - lib/librte_bbdev/Makefile | 1 - lib/librte_bbdev/meson.build | 1 - lib/librte_bpf/Makefile | 1 - lib/librte_bpf/meson.build | 1 - lib/librte_cmdline/Makefile | 1 - lib/librte_cmdline/meson.build | 1 - lib/librte_compressdev/Makefile | 1 - lib/librte_compressdev/meson.build | 1 - lib/librte_cryptodev/Makefile | 1 - lib/librte_cryptodev/meson.build | 1 - lib/librte_eal/freebsd/Makefile | 1 - lib/librte_eal/linux/Makefile | 1 - lib/librte_eal/meson.build | 1 - lib/librte_ethdev/Makefile | 1 - lib/librte_ethdev/meson.build | 1 - lib/librte_eventdev/Makefile | 1 - lib/librte_eventdev/meson.build | 2 -- lib/librte_fib/Makefile | 1 - lib/librte_fib/meson.build | 1 - lib/librte_flow_classify/Makefile | 1 - lib/librte_flow_classify/meson.build | 1 - lib/librte_gso/meson.build | 2 +- lib/librte_hash/Makefile | 2 +- lib/librte_hash/meson.build | 3 --- lib/librte_ipsec/Makefile | 1 - lib/librte_ipsec/meson.build | 2 -- lib/librte_mbuf/Makefile | 1 - lib/librte_mbuf/meson.build | 2 -- lib/librte_mempool/Makefile | 4 ---- lib/librte_mempool/meson.build | 5 ----- lib/librte_net/Makefile | 1 - lib/librte_net/meson.build | 1 - lib/librte_pdump/Makefile | 1 - lib/librte_pdump/meson.build | 1 - lib/librte_pipeline/Makefile | 1 - lib/librte_pipeline/meson.build | 1 - lib/librte_power/Makefile | 1 - lib/librte_rcu/Makefile | 1 - lib/librte_rcu/meson.build | 2 -- lib/librte_rib/Makefile | 1 - lib/librte_rib/meson.build | 1 - lib/librte_ring/Makefile | 2 +- lib/librte_ring/meson.build | 3 --- lib/librte_stack/Makefile | 1 - lib/librte_stack/meson.build | 2 -- lib/librte_telemetry/Makefile | 1 - lib/librte_telemetry/meson.build | 1 - lib/librte_timer/Makefile | 1 - lib/librte_timer/meson.build | 1 - lib/librte_vhost/Makefile | 1 - lib/librte_vhost/meson.build | 1 - lib/meson.build | 6 +----- mk/rte.app.mk | 2 ++ mk/rte.lib.mk | 1 + 244 files changed, 15 insertions(+), 398 deletions(-)
app/meson.build +1 -6
@@ -21,12 +21,11 @@ apps = [ # for BSD only lib_execinfo = cc.find_library('execinfo', required: false) -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] foreach app:apps build = true name = app - allow_experimental_apis = false sources = [] includes = [] cflags = default_cflags
@@ -53,10 +52,6 @@ foreach app:apps link_libs = dpdk_static_libraries + dpdk_drivers endif - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - executable('dpdk-' + name, sources, c_args: cflags,
app/test-bbdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # APP = testbbdev -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
app/test-bbdev/meson.build +0 -1
@@ -5,7 +5,6 @@ sources = files('main.c', 'test_bbdev.c', 'test_bbdev_perf.c', 'test_bbdev_vector.c') -allow_experimental_apis = true deps += ['bbdev', 'bus_vdev'] if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC') deps += ['pmd_bbdev_fpga_lte_fec']
app/test-compress-perf/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-compress-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-compress-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('comp_perf_options_parse.c', 'main.c', 'comp_perf_test_verify.c',
app/test-crypto-perf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk APP = dpdk-test-crypto-perf CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 # all source are stored in SRCS-y
app/test-crypto-perf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('cperf_ops.c', 'cperf_options_parsing.c', 'cperf_test_common.c',
app/test-fib/Makefile +0 -1
@@ -9,7 +9,6 @@ APP = testfib CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDFLAGS += -lresolv
app/test-fib/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['fib', 'lpm', 'net']
app/test-pmd/Makefile +0 -1
@@ -10,7 +10,6 @@ ifeq ($(CONFIG_RTE_TEST_PMD),y) # APP = testpmd -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-deprecated-declarations
app/test-pmd/meson.build +0 -1
@@ -3,7 +3,6 @@ # override default name to drop the hyphen name = 'testpmd' -allow_experimental_apis = true cflags += '-Wno-deprecated-declarations' sources = files('cmdline.c', 'cmdline_flow.c',
app/test-sad/Makefile +0 -1
@@ -8,7 +8,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) APP = testsad CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # all source are stored in SRCS-y SRCS-y := main.c
app/test-sad/meson.build +0 -1
@@ -1,6 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('main.c') deps += ['ipsec', 'net']
app/test/Makefile +0 -2
@@ -237,8 +237,6 @@ ifeq ($(CONFIG_RTE_LIBRTE_IPSEC),y) LDLIBS += -lrte_ipsec endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
app/test/meson.build +1 -1
@@ -393,7 +393,7 @@ dpdk_test = executable('dpdk-test', test_sources, link_whole: link_libs, dependencies: test_dep_objs, - c_args: [cflags, '-DALLOW_EXPERIMENTAL_API'], + c_args: [cflags, default_cflags], install_rpath: driver_install_path, install: true)
doc/guides/contributing/coding_style.rst +0 -9
@@ -842,12 +842,6 @@ sources The optional fields are: -allow_experimental_apis - **Default Value = false** - Used to allow the library to make use of APIs marked as experimental. - Set to ``true`` if the C files in the library call any functions - marked as experimental in any included header files. - build **Default Value = true** Used to optionally compile a library, based on its dependencies or
@@ -960,9 +954,6 @@ Meson Build File Contents - Drivers For drivers, the values are largely the same as for libraries. The variables supported are: -allow_experimental_apis - As above. - build As above.
drivers/baseband/fpga_lte_fec/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_fpga_lte_fec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/baseband/fpga_lte_fec/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2019 Intel Corporation deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci'] -allow_experimental_apis = true sources = files('fpga_lte_fec.c')
drivers/baseband/null/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_null.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/baseband/null/meson.build +0 -1
@@ -2,5 +2,4 @@ # Copyright(c) 2018 Luca Boccassi <[email protected]> deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_null.c')
drivers/baseband/turbo_sw/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_bbdev_turbo_sw.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring -lrte_kvargs
drivers/baseband/turbo_sw/meson.build +0 -1
@@ -36,5 +36,4 @@ if dpdk_conf.has('RTE_BBDEV_SDK_AVX512') endif deps += ['bbdev', 'bus_vdev', 'ring'] -allow_experimental_apis = true sources = files('bbdev_turbo_software.c')
drivers/bus/dpaa/Makefile +0 -1
@@ -9,7 +9,6 @@ RTE_BUS_DPAA=$(RTE_SDK)/drivers/bus/dpaa # LIB = librte_bus_dpaa.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/bus/dpaa/meson.build +0 -2
@@ -19,8 +19,6 @@ sources = files('base/fman/fman.c', 'base/qbman/qman_driver.c', 'dpaa_bus.c') -allow_experimental_apis = true - if cc.has_argument('-Wno-cast-qual') cflags += '-Wno-cast-qual' endif
drivers/bus/fslmc/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_fslmc.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/bus/fslmc/meson.build +0 -2
@@ -22,6 +22,4 @@ sources = files('fslmc_bus.c', 'qbman/qbman_portal.c', 'qbman/qbman_debug.c') -allow_experimental_apis = true - includes += include_directories('mc', 'qbman/include', 'portal')
drivers/bus/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_bus_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal
drivers/bus/ifpga/meson.build +0 -2
@@ -4,5 +4,3 @@ deps += ['pci', 'kvargs', 'rawdev'] install_headers('rte_bus_ifpga.h') sources = files('ifpga_common.c', 'ifpga_bus.c') - -allow_experimental_apis = true
drivers/bus/pci/Makefile +0 -4
@@ -8,7 +8,6 @@ EXPORT_MAP := rte_bus_pci_version.map CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
@@ -20,9 +19,6 @@ endif CFLAGS += -I$(RTE_SDK)/drivers/bus/pci/$(SYSTEM) CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common -# memseg walk is not part of stable API yet -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_pci -lrte_kvargs
drivers/bus/pci/meson.build +0 -3
@@ -16,7 +16,4 @@ else includes += include_directories('bsd') endif -# memseg walk is not part of stable API yet -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vdev/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_bus_vdev.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_bus_vdev_version.map
drivers/bus/vdev/meson.build +0 -2
@@ -5,6 +5,4 @@ sources = files('vdev.c', 'vdev_params.c') install_headers('rte_bus_vdev.h') -allow_experimental_apis = true - deps += ['kvargs']
drivers/bus/vmbus/Makefile +0 -1
@@ -7,7 +7,6 @@ EXPORT_MAP := rte_bus_vmbus_version.map CFLAGS += -I$(SRCDIR) CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_EXEC_ENV_LINUX),) SYSTEM := linux
drivers/bus/vmbus/meson.build +0 -2
@@ -1,7 +1,5 @@ # SPDX-License-Identifier: BSD-3-Clause -allow_experimental_apis = true - install_headers('rte_bus_vmbus.h','rte_vmbus_reg.h') sources = files('vmbus_common.c',
drivers/common/cpt/meson.build +0 -1
@@ -6,4 +6,3 @@ sources = files('cpt_fpm_tables.c', deps = ['kvargs', 'pci', 'cryptodev'] includes += include_directories('../../crypto/octeontx') -allow_experimental_apis = true
drivers/common/dpaax/Makefile +0 -1
@@ -9,7 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_dpaax.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/dpaax/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 NXP -allow_experimental_apis = true - if not is_linux build = false reason = 'only supported on linux'
drivers/common/iavf/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_common_iavf.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/common/iavf/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('iavf_adminq.c', 'iavf_common.c', 'iavf_impl.c') if cc.has_argument('-Wno-pointer-to-int-cast')
drivers/common/mlx5/meson.build +0 -1
@@ -49,7 +49,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true deps += ['hash', 'pci', 'net', 'eal', 'kvargs'] sources = files( 'mlx5_devx_cmds.c',
drivers/common/octeontx2/Makefile +0 -1
@@ -13,7 +13,6 @@ CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/bus/pci -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/common/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources= files('otx2_dev.c', 'otx2_irq.c', 'otx2_mbox.c',
drivers/common/qat/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(QAT_COMPRESS_DIR) ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y) - CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_compressdev SRCS-y += qat_comp.c SRCS-y += qat_comp_pmd.c
drivers/compress/isal/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_isal_comp.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # external library dependencies LDLIBS += -lisal
drivers/compress/isal/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('isal_compress_pmd.c', 'isal_compress_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/compress/octeontx/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_octeontx_zip.a # build flags CFLAGS += $(WERROR_FLAGS) CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(RTE_SDK)/drivers/compress/octeontx/include # external library include paths
drivers/compress/octeontx/meson.build +0 -1
@@ -3,7 +3,6 @@ name = 'octeontx_compress' sources = files('otx_zip.c', 'otx_zip_pmd.c') -allow_experimental_apis = true includes += include_directories('include') deps += ['mempool_octeontx', 'bus_pci'] ext_deps += dep
drivers/compress/qat/meson.build +0 -1
@@ -3,7 +3,6 @@ # Add our sources files to the list -allow_experimental_apis = true qat_sources += files('qat_comp_pmd.c', 'qat_comp.c') qat_includes += include_directories('.')
drivers/compress/zlib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zlib.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zlib_version.map
drivers/compress/zlib/meson.build +0 -2
@@ -10,5 +10,3 @@ endif deps += 'bus_vdev' sources = files('zlib_pmd.c', 'zlib_pmd_ops.c') ext_deps += dep - -allow_experimental_apis = true
drivers/crypto/aesni_gcm/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_pmd_aesni_gcm.a # build flags CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) # versioning export map
drivers/crypto/aesni_gcm/meson.build +0 -1
@@ -20,6 +20,5 @@ else endif endif -allow_experimental_apis = true sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/aesni_mb/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_aesni_mb.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_aesni_mb_version.map
drivers/crypto/aesni_mb/meson.build +0 -1
@@ -22,5 +22,4 @@ else endif sources = files('rte_aesni_mb_pmd.c', 'rte_aesni_mb_pmd_ops.c') -allow_experimental_apis = true deps += ['bus_vdev']
drivers/crypto/armv8/Makefile +0 -1
@@ -24,7 +24,6 @@ EXPORT_MAP := rte_pmd_armv8_version.map # external library dependencies CFLAGS += -I$(ARMV8_CRYPTO_LIB_PATH) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -L$(ARMV8_CRYPTO_LIB_PATH) -lAArch64crypto LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_cryptodev
drivers/crypto/armv8/meson.build +0 -1
@@ -22,4 +22,3 @@ endif deps += ['bus_vdev'] sources = files('rte_armv8_pmd.c', 'rte_armv8_pmd_ops.c') -allow_experimental_apis = true
drivers/crypto/caam_jr/Makefile +0 -2
@@ -9,8 +9,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_caam_jr.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -D _GNU_SOURCE CFLAGS += -O3
drivers/crypto/caam_jr/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('caam_jr_capabilities.c', 'caam_jr_uio.c', 'caam_jr.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include/') includes += include_directories('../../common/dpaax/') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/dpaa2_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa2_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/dpaa2_sec/meson.build +0 -2
@@ -10,6 +10,4 @@ deps += ['security', 'mempool_dpaa2'] sources = files('dpaa2_sec_dpseci.c', 'mc/dpseci.c') -allow_experimental_apis = true - includes += include_directories('mc', '../../common/dpaax', '../../common/dpaax/caamflib')
drivers/crypto/dpaa_sec/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_dpaa_sec.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/crypto/dpaa_sec/meson.build +0 -2
@@ -9,8 +9,6 @@ endif deps += ['bus_dpaa', 'mempool_dpaa', 'security'] sources = files('dpaa_sec.c') -allow_experimental_apis = true - includes += include_directories('../../bus/dpaa/include') includes += include_directories('../../common/dpaax') includes += include_directories('../../common/dpaax/caamflib/')
drivers/crypto/kasumi/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_kasumi.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_kasumi_version.map
drivers/crypto/kasumi/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_kasumi_pmd.c', 'rte_kasumi_pmd_ops.c') deps += ['bus_vdev']
drivers/crypto/nitrox/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_nitrox.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_nitrox_version.map
drivers/crypto/nitrox/meson.build +0 -1
@@ -7,7 +7,6 @@ if not is_linux endif deps += ['bus_pci'] -allow_experimental_apis = true sources = files( 'nitrox_device.c', 'nitrox_hal.c',
drivers/crypto/octeontx/Makefile +0 -1
@@ -19,7 +19,6 @@ VPATH += $(RTE_SDK)/drivers/crypto/octeontx CFLAGS += -O3 CFLAGS += -I$(RTE_SDK)/drivers/common/cpt -CFLAGS += -DALLOW_EXPERIMENTAL_API # PMD code SRCS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += otx_cryptodev.c
drivers/crypto/octeontx/meson.build +0 -1
@@ -9,7 +9,6 @@ deps += ['bus_pci'] deps += ['common_cpt'] name = 'octeontx_crypto' -allow_experimental_apis = true sources = files('otx_cryptodev.c', 'otx_cryptodev_capabilities.c', 'otx_cryptodev_hw_access.c',
drivers/crypto/octeontx2/Makefile +0 -1
@@ -23,7 +23,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/crypto/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/crypto/octeontx2/meson.build +0 -1
@@ -12,7 +12,6 @@ deps += ['ethdev'] deps += ['security'] name = 'octeontx2_crypto' -allow_experimental_apis = true sources = files('otx2_cryptodev.c', 'otx2_cryptodev_capabilities.c', 'otx2_cryptodev_hw_access.c',
drivers/crypto/openssl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_openssl.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_openssl_version.map
drivers/crypto/openssl/meson.build +0 -1
@@ -6,7 +6,6 @@ if not dep.found() build = false reason = 'missing dependency, "libcrypto"' endif -allow_experimental_apis = true deps += 'bus_vdev' sources = files('rte_openssl_pmd.c', 'rte_openssl_pmd_ops.c') ext_deps += dep
drivers/crypto/snow3g/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_snow3g.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_snow3g_version.map
drivers/crypto/snow3g/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_snow3g_pmd.c', 'rte_snow3g_pmd_ops.c') deps += ['bus_vdev', 'cryptodev']
drivers/crypto/zuc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_zuc.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # versioning export map EXPORT_MAP := rte_pmd_zuc_version.map
drivers/crypto/zuc/meson.build +0 -1
@@ -19,7 +19,6 @@ else endif -allow_experimental_apis = true ext_deps += lib sources = files('rte_zuc_pmd.c', 'rte_zuc_pmd_ops.c') deps += ['bus_vdev']
drivers/event/dpaa/Makefile +0 -1
@@ -10,7 +10,6 @@ RTE_SDK_DPAA=$(RTE_SDK)/drivers/net/dpaa # LIB = librte_pmd_dpaa_event.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS := -I$(SRCDIR) $(CFLAGS) CFLAGS += -O3 $(WERROR_FLAGS) CFLAGS += -Wno-pointer-arith
drivers/event/dpaa/meson.build +0 -1
@@ -8,5 +8,4 @@ endif deps += ['pmd_dpaa', 'pmd_dpaa_sec'] sources = files('dpaa_eventdev.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa_sec/')
drivers/event/dpaa2/Makefile +0 -3
@@ -31,9 +31,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec # versioning export map EXPORT_MAP := rte_pmd_dpaa2_event_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # # all source are stored in SRCS-y #
drivers/event/dpaa2/meson.build +0 -1
@@ -10,5 +10,4 @@ sources = files('dpaa2_hw_dpcon.c', 'dpaa2_eventdev.c', 'dpaa2_eventdev_selftest.c') -allow_experimental_apis = true includes += include_directories('../../crypto/dpaa2_sec/')
drivers/event/dsw/Makefile +0 -3
@@ -11,9 +11,6 @@ ifneq ($(CONFIG_RTE_TOOLCHAIN_ICC),y) CFLAGS += -Wno-format-nonliteral endif -# Depends on rte_ring_elem_*() -CFLAGS += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal LDLIBS += -lrte_mbuf LDLIBS += -lrte_mempool
drivers/event/dsw/meson.build +0 -3
@@ -6,6 +6,3 @@ if cc.has_argument('-Wno-format-nonliteral') cflags += '-Wno-format-nonliteral' endif sources = files('dsw_evdev.c', 'dsw_event.c', 'dsw_xstats.c') - -# Depends on rte_ring_elem_*() -allow_experimental_apis = true
drivers/event/octeontx2/Makefile +0 -1
@@ -16,7 +16,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/event/octeontx2 CFLAGS += -I$(RTE_SDK)/drivers/net/octeontx2 CFLAGS += -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API ifneq ($(CONFIG_RTE_ARCH_64),y) CFLAGS += -Wno-int-to-pointer-cast
drivers/event/octeontx2/meson.build +0 -2
@@ -12,8 +12,6 @@ sources = files('otx2_worker.c', 'otx2_tim_worker.c' ) -allow_experimental_apis = true - extra_flags = [] # This integrated controller runs only on a arm64 machine, remove 32bit warnings if not dpdk_conf.get('RTE_ARCH_64')
drivers/event/opdl/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_opdl_event.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_eventdev -lrte_kvargs LDLIBS += -lrte_bus_vdev -lrte_mbuf -lrte_mempool
drivers/event/opdl/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources = files( 'opdl_evdev.c', 'opdl_evdev_init.c',
drivers/mempool/bucket/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_mempool_bucket.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring
drivers/mempool/bucket/meson.build +0 -2
@@ -6,6 +6,4 @@ # This software was jointly developed between OKTET Labs (under contract # for Solarflare) and Solarflare Communications, Inc. -allow_experimental_apis = true - sources = files('rte_mempool_bucket.c')
drivers/mempool/dpaa/Makefile +0 -3
@@ -19,9 +19,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_mempool # versioning export map EXPORT_MAP := rte_mempool_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA_MEMPOOL) += dpaa_mempool.c
drivers/mempool/dpaa/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_dpaa'] sources = files('dpaa_mempool.c') - -# depends on dpaa bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/dpaa2/Makefile +0 -3
@@ -18,9 +18,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include # versioning export map EXPORT_MAP := rte_mempool_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL) += dpaa2_hw_mempool.c
drivers/mempool/dpaa2/meson.build +0 -3
@@ -8,6 +8,3 @@ endif deps += ['bus_fslmc'] sources = files('dpaa2_hw_mempool.c') - -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true
drivers/mempool/octeontx/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_mempool_octeontx.a CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/octeontx/ -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_mempool_octeontx_version.map
drivers/mempool/octeontx/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Cavium, Inc -allow_experimental_apis = true - sources = files('octeontx_fpavf.c', 'rte_mempool_octeontx.c' )
drivers/mempool/octeontx2/Makefile +1 -3
@@ -23,8 +23,6 @@ CFLAGS += -diag-disable 2259 endif endif -CFLAGS += -DALLOW_EXPERIMENTAL_API - EXPORT_MAP := rte_mempool_octeontx2_version.map #
@@ -32,7 +30,7 @@ EXPORT_MAP := rte_mempool_octeontx2_version.map # SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL) += \ otx2_mempool_ops.c \ - otx2_mempool.c \ + otx2_mempool.c \ otx2_mempool_irq.c \ otx2_mempool_debug.c
drivers/mempool/octeontx2/meson.build +0 -2
@@ -2,8 +2,6 @@ # Copyright(C) 2019 Marvell International Ltd. # -allow_experimental_apis = true - sources = files('otx2_mempool_ops.c', 'otx2_mempool.c', 'otx2_mempool_irq.c',
drivers/mempool/stack/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_mempool_stack.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Headers CFLAGS += -I$(RTE_SDK)/lib/librte_mempool
drivers/mempool/stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_mempool_stack.c') deps += ['stack']
drivers/meson.build +1 -6
@@ -20,7 +20,7 @@ dpdk_driver_classes = ['common', disabled_drivers = run_command(list_dir_globs, get_option('disable_drivers'), ).stdout().split() -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endif
@@ -44,7 +44,6 @@ foreach class:dpdk_driver_classes reason = '<unknown reason>' # set if build == false to explain name = drv fmt_name = '' - allow_experimental_apis = false sources = [] objs = [] cflags = default_cflags
@@ -106,10 +105,6 @@ foreach class:dpdk_driver_classes dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) lib_name = driver_name_fmt.format(fmt_name) - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif - dpdk_extra_ldflags += pkgconfig_extra_libs # generate pmdinfo sources by building a temporary
drivers/net/atlantic/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_atlantic.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_atlantic_version.map
drivers/net/atlantic/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Aquantia Corporation -allow_experimental_apis = true - sources = files( 'atl_rxtx.c', 'atl_ethdev.c',
drivers/net/avp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_avp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/avp/meson.build +0 -1
@@ -5,6 +5,5 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true sources = files('avp_ethdev.c') install_headers('rte_avp_common.h', 'rte_avp_fifo.h')
drivers/net/axgbe/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_axgbe.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_axgbe_version.map
drivers/net/axgbe/meson.build +0 -2
@@ -6,8 +6,6 @@ if not is_linux reason = 'only supported on linux' endif -allow_experimental_apis = true - sources = files('axgbe_ethdev.c', 'axgbe_dev.c', 'axgbe_mdio.c',
drivers/net/bnx2x/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_bnx2x.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -DZLIB_CONST -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lz LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs
drivers/net/bnx2x/meson.build +0 -1
@@ -5,7 +5,6 @@ dep = dependency('zlib', required: false) build = dep.found() reason = 'missing dependency, "zlib"' ext_deps += dep -allow_experimental_apis = true cflags += '-DZLIB_CONST' sources = files('bnx2x.c', 'bnx2x_ethdev.c',
drivers/net/bonding/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_bond.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/bonding/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'bond' #, james bond :-) -allow_experimental_apis = true sources = files('rte_eth_bond_api.c', 'rte_eth_bond_pmd.c', 'rte_eth_bond_flow.c', 'rte_eth_bond_args.c', 'rte_eth_bond_8023ad.c', 'rte_eth_bond_alb.c')
drivers/net/dpaa/Makefile +0 -3
@@ -25,9 +25,6 @@ CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include EXPORT_MAP := rte_pmd_dpaa_version.map -# depends on dpaa bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA_PMD) += dpaa_rxtx.c
drivers/net/dpaa/meson.build +0 -2
@@ -14,6 +14,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -allow_experimental_apis = true - install_headers('rte_pmd_dpaa.h')
drivers/net/dpaa2/Makefile +0 -3
@@ -24,9 +24,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2 # versioning export map EXPORT_MAP := rte_pmd_dpaa2_version.map -# depends on fslmc bus which uses experimental API -CFLAGS += -DALLOW_EXPERIMENTAL_API - SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += base/dpaa2_hw_dpni.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_rxtx.c SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += dpaa2_ethdev.c
drivers/net/dpaa2/meson.build +0 -3
@@ -24,7 +24,4 @@ endif includes += include_directories('base', 'mc') -# depends on fslmc bus which uses experimental API -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2.h')
drivers/net/e1000/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_e1000.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/e1000/base/meson.build +0 -3
@@ -25,9 +25,6 @@ error_cflags = ['-Wno-uninitialized', '-Wno-unused-parameter', '-Wno-unused-variable', '-Wno-misleading-indentation', '-Wno-implicit-fallthrough'] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/e1000/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ena/Makefile +0 -2
@@ -12,8 +12,6 @@ CFLAGS += $(WERROR_FLAGS) -O2 INCLUDES :=-I$(SRCDIR) -I$(SRCDIR)/base/ena_defs -I$(SRCDIR)/base EXPORT_MAP := rte_pmd_ena_version.map -# rte_fbarray is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API VPATH += $(SRCDIR)/base #
drivers/net/ena/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('ena_ethdev.c', 'base/ena_com.c', 'base/ena_eth_com.c')
drivers/net/enetc/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_enetc.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_enetc_version.map SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_ethdev.c SRCS-$(CONFIG_RTE_LIBRTE_ENETC_PMD) += enetc_rxtx.c
drivers/net/enetc/meson.build +0 -1
@@ -11,4 +11,3 @@ sources = files('enetc_ethdev.c', 'enetc_rxtx.c') includes += include_directories('base') -allow_experimental_apis = true
drivers/net/enic/Makefile +0 -2
@@ -11,8 +11,6 @@ LIB = librte_pmd_enic.a EXPORT_MAP := rte_pmd_enic_version.map -# Experimental APIs used: rte_intr_ack -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/enic/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Cisco Systems, Inc. -# Experimental APIs used: rte_intr_ack -cflags += ['-DALLOW_EXPERIMENTAL_API'] sources = files( 'base/vnic_cq.c', 'base/vnic_dev.c',
drivers/net/failsafe/Makefile +0 -1
@@ -27,7 +27,6 @@ endif # No exported include files # Basic CFLAGS: -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -std=gnu99 -Wextra CFLAGS += -O3 CFLAGS += -I.
drivers/net/failsafe/meson.build +0 -2
@@ -11,8 +11,6 @@ else cflags += '-DBSD' endif -allow_experimental_apis = true - sources = files('failsafe_args.c', 'failsafe.c', 'failsafe_eal.c',
drivers/net/fm10k/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_fm10k.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_fm10k_version.map
drivers/net/fm10k/base/meson.build +0 -3
@@ -16,9 +16,6 @@ error_cflags = ['-Wno-unused-parameter', '-Wno-unused-value', '-Wno-implicit-fallthrough' ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/fm10k/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/hinic/base/meson.build +1 -1
@@ -12,7 +12,7 @@ sources = [ 'hinic_pmd_niccfg.c', 'hinic_pmd_nicio.c', 'hinic_pmd_wq.c', - 'hinic_pmd_mbox.c', + 'hinic_pmd_mbox.c', ] extra_flags = []
drivers/net/hinic/meson.build +1 -1
@@ -8,7 +8,7 @@ sources = files( 'hinic_pmd_ethdev.c', 'hinic_pmd_rx.c', 'hinic_pmd_tx.c', - 'hinic_pmd_flow.c', + 'hinic_pmd_flow.c', ) includes += include_directories('base')
drivers/net/hns3/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_hns3.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # Experimantal APIs: # - rte_mp_action_register # - rte_mp_action_unregister
drivers/net/hns3/meson.build +0 -7
@@ -27,11 +27,4 @@ sources = files('hns3_cmd.c', 'hns3_stats.c', 'hns3_mp.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_mp_action_register -# - rte_mp_action_unregister -# - rte_mp_reply -# - rte_mp_request_sync - deps += ['hash']
drivers/net/i40e/Makefile +0 -1
@@ -11,7 +11,6 @@ LIB = librte_pmd_i40e.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -DPF_DRIVER -DVF_DRIVER -DINTEGRATED_VF CFLAGS += -DX722_A0_SUPPORT -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash
drivers/net/i40e/base/meson.build +0 -3
@@ -18,9 +18,6 @@ error_cflags = ['-Wno-sign-compare', '-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/i40e/meson.build +1 -2
@@ -4,8 +4,7 @@ cflags += ['-DPF_DRIVER', '-DVF_DRIVER', '-DINTEGRATED_VF', - '-DX722_A0_SUPPORT', - '-DALLOW_EXPERIMENTAL_API'] + '-DX722_A0_SUPPORT'] subdir('base') objs = [base_objs]
drivers/net/iavf/Makefile +1 -1
@@ -9,7 +9,7 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_iavf.a CFLAGS += -I$(RTE_SDK)/drivers/common/iavf -CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 $(WERROR_FLAGS) -Wno-strict-aliasing LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_pci
drivers/net/iavf/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-Wno-strict-aliasing'] -allow_experimental_apis = true - includes += include_directories('../../common/iavf') deps += ['common_iavf']
drivers/net/ice/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_ice.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_ethdev -lrte_kvargs LDLIBS += -lrte_bus_pci -lrte_mempool -lrte_hash
drivers/net/ice/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/ionic/Makefile +0 -3
@@ -8,9 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ionic.a -# Required to use rte_eth_dev_create and rte_eth_dev_destroy -CFLAGS += -DALLOW_EXPERIMENTAL_API - CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/ipn3ke/Makefile +0 -1
@@ -15,7 +15,6 @@ LIB = librte_pmd_ipn3ke.a # rte_eth_dev_destroy() # rte_eth_switch_domain_free() # -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/net/ipn3ke/meson.build +0 -2
@@ -19,8 +19,6 @@ if not dep.found() subdir_done() endif -allow_experimental_apis = true - includes += include_directories('../../raw/ifpga') sources += files('ipn3ke_ethdev.c',
drivers/net/ixgbe/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_ixgbe.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/ixgbe/base/meson.build +0 -3
@@ -22,9 +22,6 @@ error_cflags = ['-Wno-unused-value', '-Wno-unused-parameter', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/ixgbe/meson.build +0 -2
@@ -3,8 +3,6 @@ cflags += ['-DRTE_LIBRTE_IXGBE_BYPASS'] -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/memif/Makefile +0 -7
@@ -12,13 +12,6 @@ EXPORT_MAP := rte_pmd_memif_version.map CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool LDLIBS += -lrte_ethdev -lrte_kvargs -lrte_net LDLIBS += -lrte_hash
drivers/net/memif/meson.build +0 -8
@@ -9,12 +9,4 @@ endif sources = files('rte_eth_memif.c', 'memif_socket.c') -allow_experimental_apis = true -# Experimantal APIs: -# - rte_intr_callback_unregister_pending -# - rte_mp_action_register -# - rte_mp_reply -# - rte_mp_request_sync -# - rte_mcfg_get_single_file_segments - deps += ['hash']
drivers/net/mlx4/Makefile +0 -1
@@ -38,7 +38,6 @@ CFLAGS += -D_BSD_SOURCE CFLAGS += -D_DEFAULT_SOURCE CFLAGS += -D_XOPEN_SOURCE=600 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y) CFLAGS += -DMLX4_GLUE='"$(LIB_GLUE)"' CFLAGS += -DMLX4_GLUE_VERSION='"$(LIB_GLUE_VERSION)"'
drivers/net/mlx4/meson.build +0 -1
@@ -50,7 +50,6 @@ if static_ibverbs ext_deps += declare_dependency(link_args:ibv_ldflags.split()) endif -allow_experimental_apis = true sources = files( 'mlx4.c', 'mlx4_ethdev.c',
drivers/net/mlx5/Makefile +0 -3
@@ -56,9 +56,6 @@ CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG. ifeq ($(DEBUG),1)
drivers/net/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux subdir_done() endif -allow_experimental_apis = true deps += ['hash', 'common_mlx5'] sources = files( 'mlx5.c',
drivers/net/netvsc/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_netvsc.a CFLAGS += -O3 $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_pmd_netvsc_version.map
drivers/net/netvsc/meson.build +0 -2
@@ -6,5 +6,3 @@ reason = 'missing dependency, DPDK VMBus driver' sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c') deps += ['bus_vmbus' ] - -allow_experimental_apis = true
drivers/net/nfp/Makefile +0 -1
@@ -10,7 +10,6 @@ LIB = librte_pmd_nfp.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/nfp/meson.build +0 -2
@@ -18,5 +18,3 @@ sources = files('nfpcore/nfp_cpp_pcie_ops.c', 'nfpcore/nfp_nsp_eth.c', 'nfpcore/nfp_hwinfo.c', 'nfp_net.c') - -allow_experimental_apis = true
drivers/net/octeontx/Makefile +0 -2
@@ -42,8 +42,6 @@ else CFLAGS_octeontx_rxtx.o += -O3 -Ofast endif -CFLAGS_octeontx_ethdev.o += -DALLOW_EXPERIMENTAL_API - LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_common_octeontx LDLIBS += -lrte_mempool_octeontx
drivers/net/octeontx/base/meson.build +0 -3
@@ -14,9 +14,6 @@ foreach d: depends endforeach c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif base_lib = static_library('octeontx_base', sources, c_args: c_args, dependencies: static_objs,
drivers/net/octeontx/meson.build +0 -2
@@ -8,8 +8,6 @@ sources = files('octeontx_rxtx.c', 'octeontx_ethdev.c' ) -allow_experimental_apis = true - deps += ['mempool_octeontx', 'eventdev'] includes += include_directories('base')
drivers/net/pfe/Makefile +0 -4
@@ -15,10 +15,6 @@ CFLAGS += -I$(RTE_SDK)/drivers/net/pfe/base/ CFLAGS += -I$(RTE_SDK)/drivers/common/dpaax EXPORT_MAP := rte_pmd_pfe_version.map -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -CFLAGS += -DALLOW_EXPERIMENTAL_API # Interfaces with DPDK SRCS-$(CONFIG_RTE_LIBRTE_PFE_PMD) += pfe_ethdev.c
drivers/net/pfe/meson.build +0 -5
@@ -15,9 +15,4 @@ if cc.has_argument('-Wno-pointer-arith') cflags += '-Wno-pointer-arith' endif -# Driver uses below experimental APIs -# rte_mem_iova2virt -# rte_mem_virt2memseg -allow_experimental_apis = true - includes += include_directories('base')
drivers/net/qede/Makefile +0 -1
@@ -12,7 +12,6 @@ LIB = librte_pmd_qede.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs LDLIBS += -lrte_bus_pci
drivers/net/qede/base/meson.build +0 -3
@@ -45,9 +45,6 @@ error_cflags = [ '-Wno-pointer-bool-conversion', ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: error_cflags if cc.has_argument(flag) c_args += flag
drivers/net/qede/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true - subdir('base') objs = [base_objs]
drivers/net/sfc/Makefile +0 -1
@@ -13,7 +13,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_sfc_efx.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/base/ CFLAGS += -I$(SRCDIR) CFLAGS += -O3
drivers/net/sfc/base/meson.build +0 -3
@@ -63,9 +63,6 @@ extra_flags = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif foreach flag: extra_flags if cc.has_argument(flag) c_args += flag
drivers/net/sfc/meson.build +0 -2
@@ -11,8 +11,6 @@ if arch_subdir != 'x86' or not dpdk_conf.get('RTE_ARCH_64') reason = 'only supported on x86_64' endif -allow_experimental_apis = true - extra_flags = [] # Strict-aliasing rules are violated by rte_eth_link to uint64_t casts
drivers/net/softnic/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_softnic.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_pipeline -lrte_port -lrte_table
drivers/net/softnic/meson.build +0 -1
@@ -5,7 +5,6 @@ if not is_linux build = false reason = 'only supported on linux' endif -allow_experimental_apis = true install_headers('rte_eth_softnic.h') sources = files('rte_eth_softnic_tm.c', 'rte_eth_softnic.c',
drivers/net/tap/Makefile +0 -1
@@ -20,7 +20,6 @@ CFLAGS += -O3 CFLAGS += -I$(SRCDIR) CFLAGS += -I. CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_hash LDLIBS += -lrte_bus_vdev -lrte_gso
drivers/net/tap/meson.build +0 -1
@@ -39,7 +39,6 @@ args = [ 'TCA_ACT_BPF_FD' ], ] config = configuration_data() -allow_experimental_apis = true foreach arg:args config.set(arg[0], cc.has_header_symbol(arg[1], arg[2])) endforeach
drivers/net/thunderx/Makefile +0 -1
@@ -10,7 +10,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_pmd_thunderx_nicvf.a CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lm LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/thunderx/base/meson.build +0 -3
@@ -8,9 +8,6 @@ sources = [ ] c_args = cflags -if allow_experimental_apis - c_args += '-DALLOW_EXPERIMENTAL_API' -endif base_lib = static_library('nicvf_base', sources, c_args: c_args, dependencies: static_rte_ethdev
drivers/net/thunderx/meson.build +0 -1
@@ -4,7 +4,6 @@ subdir('base') objs = [base_objs] -allow_experimental_apis = true sources = files('nicvf_rxtx.c', 'nicvf_ethdev.c', 'nicvf_svf.c'
drivers/net/vdev_netvsc/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_pmd_vdev_netvsc.a EXPORT_MAP := rte_pmd_vdev_netvsc_version.map # Additional compilation flags. -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += -g CFLAGS += -Wall -Wextra
drivers/net/vdev_netvsc/meson.build +0 -2
@@ -7,8 +7,6 @@ if not is_linux endif sources = files('vdev_netvsc.c') -allow_experimental_apis = true - cflags_options = [ '-D_BSD_SOURCE', '-D_DEFAULT_SOURCE',
drivers/net/virtio/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_virtio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
drivers/net/virtio/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources += files('virtio_ethdev.c', 'virtio_pci.c', 'virtio_rxtx.c',
drivers/net/vmxnet3/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pmd_vmxnet3_uio.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/net/vmxnet3/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Luca Boccassi <[email protected]> -allow_experimental_apis = true sources += files( 'vmxnet3_ethdev.c', 'vmxnet3_rxtx.c',
drivers/raw/dpaa2_cmdif/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_cmdif.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_cmdif/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev'] sources = files('dpaa2_cmdif.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_cmdif.h')
drivers/raw/dpaa2_qdma/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_dpaa2_qdma.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS)
drivers/raw/dpaa2_qdma/meson.build +0 -2
@@ -6,6 +6,4 @@ reason = 'missing dependency, DPDK DPAA2 mempool driver' deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs'] sources = files('dpaa2_qdma.c') -allow_experimental_apis = true - install_headers('rte_pmd_dpaa2_qdma.h')
drivers/raw/ifpga/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ifpga.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) CFLAGS += -I$(RTE_SDK)/drivers/bus/ifpga
drivers/raw/ifpga/meson.build +0 -2
@@ -23,5 +23,3 @@ sources = files('ifpga_rawdev.c') includes += include_directories('base') includes += include_directories('../../net/ipn3ke') includes += include_directories('../../net/i40e') - -allow_experimental_apis = true
drivers/raw/ntb/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_rawdev_ntb.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
drivers/raw/ntb/meson.build +0 -1
@@ -6,4 +6,3 @@ deps += ['rawdev', 'mbuf', 'mempool', sources = files('ntb.c', 'ntb_hw_intel.c') install_headers('rte_pmd_ntb.h') -allow_experimental_apis = true
drivers/vdpa/ifc/Makefile +0 -1
@@ -14,7 +14,6 @@ LDLIBS += -lrte_kvargs CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API # # Add extra flags for base driver source files to disable warnings in them
drivers/vdpa/ifc/meson.build +0 -1
@@ -3,7 +3,6 @@ build = dpdk_conf.has('RTE_LIBRTE_VHOST') reason = 'missing dependency, DPDK vhost library' -allow_experimental_apis = true sources = files('ifcvf_vdpa.c', 'base/ifcvf.c') includes += include_directories('base') deps += 'vhost'
drivers/vdpa/mlx5/Makefile +0 -2
@@ -35,8 +35,6 @@ LDLIBS += -lrte_eal -lrte_vhost -lrte_kvargs -lrte_pci -lrte_bus_pci -lrte_sched CFLAGS += -Wno-error=cast-qual EXPORT_MAP := rte_pmd_mlx5_vdpa_version.map -# memseg walk is not part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API # DEBUG which is usually provided on the command-line may enable # CONFIG_RTE_LIBRTE_MLX5_DEBUG.
drivers/vdpa/mlx5/meson.build +0 -1
@@ -8,7 +8,6 @@ if not is_linux endif fmt_name = 'mlx5_vdpa' -allow_experimental_apis = true deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'bus_pci', 'eal', 'sched'] sources = files( 'mlx5_vdpa.c',
lib/librte_bbdev/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_bbdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf
lib/librte_bbdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_bbdev.c') headers = files('rte_bbdev.h', 'rte_bbdev_pmd.h',
lib/librte_bpf/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_bpf.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_net -lrte_eal LDLIBS += -lrte_mempool -lrte_ring LDLIBS += -lrte_mbuf -lrte_ethdev
lib/librte_bpf/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('bpf.c', 'bpf_exec.c', 'bpf_load.c',
lib/librte_cmdline/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_cmdline.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API EXPORT_MAP := rte_cmdline_version.map
lib/librte_cmdline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('cmdline.c', 'cmdline_cirbuf.c', 'cmdline_parse.c',
lib/librte_compressdev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_compressdev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_kvargs # library source files
lib/librte_compressdev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true sources = files('rte_compressdev.c', 'rte_compressdev_pmd.c', 'rte_comp.c')
lib/librte_cryptodev/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_cryptodev.a # build flags CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_ring -lrte_mbuf LDLIBS += -lrte_kvargs
lib/librte_cryptodev/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017-2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_cryptodev.c', 'rte_cryptodev_pmd.c') headers = files('rte_cryptodev.h', 'rte_cryptodev_pmd.h',
lib/librte_eal/freebsd/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_eal/linux/Makefile +0 -1
@@ -9,7 +9,6 @@ ARCH_DIR ?= $(RTE_ARCH) VPATH += $(RTE_SDK)/lib/librte_eal/$(ARCH_DIR) VPATH += $(RTE_SDK)/lib/librte_eal/common -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -I$(SRCDIR)/include CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common CFLAGS += -I$(RTE_SDK)/lib/librte_eal/include
lib/librte_eal/meson.build +0 -1
@@ -11,7 +11,6 @@ subdir(exec_env) subdir(arch_subdir) -allow_experimental_apis = true deps += 'kvargs' if dpdk_conf.has('RTE_USE_LIBBSD') ext_deps += libbsd
lib/librte_ethdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_ethdev.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_net -lrte_eal -lrte_mempool -lrte_ring
lib/librte_ethdev/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2017 Intel Corporation name = 'ethdev' -allow_experimental_apis = true sources = files('ethdev_private.c', 'ethdev_profile.c', 'rte_class_eth.c',
lib/librte_eventdev/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_eventdev.a # build flags -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
lib/librte_eventdev/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - if is_linux cflags += '-DLINUX' else
lib/librte_fib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_fib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_rib EXPORT_MAP := rte_fib_version.map
lib/librte_fib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_fib.c', 'rte_fib6.c', 'dir24_8.c', 'trie.c') headers = files('rte_fib.h', 'rte_fib6.h') deps += ['rib']
lib/librte_flow_classify/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_flow_classify.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
lib/librte_flow_classify/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_flow_classify.c', 'rte_flow_classify_parse.c') headers = files('rte_flow_classify.h') deps += ['net', 'table']
lib/librte_gso/meson.build +1 -1
@@ -2,6 +2,6 @@ # Copyright(c) 2017 Intel Corporation sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c', - 'gso_tunnel_tcp4.c', 'rte_gso.c') + 'gso_tunnel_tcp4.c', 'rte_gso.c') headers = files('rte_gso.h') deps += ['ethdev']
lib/librte_hash/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_hash.a -CFLAGS += -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) LDLIBS += -lrte_eal -lrte_ring
lib/librte_hash/meson.build +0 -3
@@ -10,6 +10,3 @@ headers = files('rte_crc_arm64.h', sources = files('rte_cuckoo_hash.c', 'rte_fbk_hash.c') deps += ['ring'] - -# rte ring reset is not yet part of stable API -allow_experimental_apis = true
lib/librte_ipsec/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_ipsec.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_net LDLIBS += -lrte_cryptodev -lrte_security -lrte_hash
lib/librte_ipsec/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Intel Corporation -allow_experimental_apis = true - sources = files('esp_inb.c', 'esp_outb.c', 'sa.c', 'ses.c', 'ipsec_sad.c') headers = files('rte_ipsec.h', 'rte_ipsec_group.h', 'rte_ipsec_sa.h', 'rte_ipsec_sad.h')
lib/librte_mbuf/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mbuf.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool
lib/librte_mbuf/meson.build +0 -2
@@ -7,5 +7,3 @@ headers = files('rte_mbuf.h', 'rte_mbuf_core.h', 'rte_mbuf_ptype.h', 'rte_mbuf_pool_ops.h', 'rte_mbuf_dyn.h') deps += ['mempool'] - -allow_experimental_apis = true
lib/librte_mempool/Makefile +0 -4
@@ -7,14 +7,10 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_mempool.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ring EXPORT_MAP := rte_mempool_version.map -# memseg walk is not yet part of stable API -CFLAGS += -DALLOW_EXPERIMENTAL_API - # all source are stored in SRCS-y SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool.c SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool_ops.c
lib/librte_mempool/meson.build +0 -5
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true - extra_flags = [] foreach flag: extra_flags
@@ -15,6 +13,3 @@ sources = files('rte_mempool.c', 'rte_mempool_ops.c', 'rte_mempool_ops_default.c') headers = files('rte_mempool.h') deps += ['ring'] - -# memseg walk is not yet part of stable API -allow_experimental_apis = true
lib/librte_net/Makefile +0 -1
@@ -5,7 +5,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_net.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_mbuf -lrte_eal -lrte_mempool
lib/librte_net/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true headers = files('rte_ip.h', 'rte_tcp.h', 'rte_udp.h',
lib/librte_pdump/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_pdump.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_ethdev
lib/librte_pdump/meson.build +0 -1
@@ -3,5 +3,4 @@ sources = files('rte_pdump.c') headers = files('rte_pdump.h') -allow_experimental_apis = true deps += ['ethdev']
lib/librte_pipeline/Makefile +0 -1
@@ -8,7 +8,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # LIB = librte_pipeline.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) LDLIBS += -lrte_eal -lrte_mempool -lrte_mbuf -lrte_table
lib/librte_pipeline/meson.build +0 -1
@@ -1,7 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation -allow_experimental_apis = true sources = files('rte_pipeline.c', 'rte_port_in_action.c', 'rte_table_action.c') headers = files('rte_pipeline.h', 'rte_port_in_action.h', 'rte_table_action.h') deps += ['port', 'table', 'meter', 'sched', 'cryptodev']
lib/librte_power/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_power.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing LDLIBS += -lrte_eal -lrte_timer
lib/librte_rcu/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_rcu.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_rcu/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2018 Arm Limited -allow_experimental_apis = true - sources = files('rte_rcu_qsbr.c') headers = files('rte_rcu_qsbr.h')
lib/librte_rib/Makefile +0 -1
@@ -9,7 +9,6 @@ LIB = librte_rib.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_mempool EXPORT_MAP := rte_rib_version.map
lib/librte_rib/meson.build +0 -1
@@ -2,7 +2,6 @@ # Copyright(c) 2018 Vladimir Medvedkin <[email protected]> # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true sources = files('rte_rib.c', 'rte_rib6.c') headers = files('rte_rib.h', 'rte_rib6.h') deps += ['mempool']
lib/librte_ring/Makefile +1 -1
@@ -6,7 +6,7 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_ring.a -CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -DALLOW_EXPERIMENTAL_API +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal EXPORT_MAP := rte_ring_version.map
lib/librte_ring/meson.build +0 -3
@@ -6,6 +6,3 @@ headers = files('rte_ring.h', 'rte_ring_elem.h', 'rte_ring_c11_mem.h', 'rte_ring_generic.h') - -# rte_ring_create_elem and rte_ring_get_memsize_elem are experimental -allow_experimental_apis = true
lib/librte_stack/Makefile +0 -1
@@ -7,7 +7,6 @@ include $(RTE_SDK)/mk/rte.vars.mk LIB = librte_stack.a CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal EXPORT_MAP := rte_stack_version.map
lib/librte_stack/meson.build +0 -2
@@ -1,8 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2019 Intel Corporation -allow_experimental_apis = true - sources = files('rte_stack.c', 'rte_stack_std.c', 'rte_stack_lf.c') headers = files('rte_stack.h', 'rte_stack_std.h',
lib/librte_telemetry/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_telemetry.a CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -CFLAGS += -DALLOW_EXPERIMENTAL_API LDLIBS += -lrte_eal -lrte_ethdev LDLIBS += -lrte_metrics
lib/librte_telemetry/meson.build +0 -1
@@ -4,7 +4,6 @@ sources = files('rte_telemetry.c', 'rte_telemetry_parser.c', 'rte_telemetry_parser_test.c') headers = files('rte_telemetry.h', 'rte_telemetry_internal.h', 'rte_telemetry_parser.h') deps += ['metrics', 'ethdev'] -cflags += '-DALLOW_EXPERIMENTAL_API' jansson = dependency('jansson', required: false) if jansson.found()
lib/librte_timer/Makefile +0 -1
@@ -6,7 +6,6 @@ include $(RTE_SDK)/mk/rte.vars.mk # library name LIB = librte_timer.a -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 LDLIBS += -lrte_eal
lib/librte_timer/meson.build +0 -1
@@ -3,4 +3,3 @@ sources = files('rte_timer.c') headers = files('rte_timer.h') -allow_experimental_apis = true
lib/librte_vhost/Makefile +0 -1
@@ -8,7 +8,6 @@ LIB = librte_vhost.a EXPORT_MAP := rte_vhost_version.map -CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 CFLAGS += -I vhost_user CFLAGS += -fno-strict-aliasing
lib/librte_vhost/meson.build +0 -1
@@ -17,7 +17,6 @@ elif (toolchain == 'icc' and cc.version().version_compare('>=16.0.0')) endif dpdk_conf.set('RTE_LIBRTE_VHOST_POSTCOPY', cc.has_header('linux/userfaultfd.h')) -allow_experimental_apis = true cflags += '-fno-strict-aliasing' sources = files('fd_man.c', 'iotlb.c', 'socket.c', 'vdpa.c', 'vhost.c', 'vhost_user.c',
lib/meson.build +1 -5
@@ -36,7 +36,7 @@ if is_windows libraries = ['kvargs','eal'] # only supported libraries for windows endif -default_cflags = machine_args +default_cflags = machine_args + ['-DALLOW_EXPERIMENTAL_API'] if cc.has_argument('-Wno-format-truncation') default_cflags += '-Wno-format-truncation' endif
@@ -47,7 +47,6 @@ foreach l:libraries build = true reason = '<unknown reason>' # set if build == false to explain why name = l - allow_experimental_apis = false use_function_versioning = false sources = [] headers = []
@@ -98,9 +97,6 @@ foreach l:libraries static_dep = shared_dep else - if allow_experimental_apis - cflags += '-DALLOW_EXPERIMENTAL_API' - endif if use_function_versioning cflags += '-DRTE_USE_FUNCTION_VERSIONING' endif
mk/rte.app.mk +2 -0
@@ -27,6 +27,8 @@ LDFLAGS += --as-needed # default path for libs _LDLIBS-y += -L$(RTE_SDK_BIN)/lib +CFLAGS += -DALLOW_EXPERIMENTAL_API + # # Order is important: from higher level to lower level #
mk/rte.lib.mk +1 -0
@@ -34,6 +34,7 @@ _INSTALL = $(INSTALL-FILES-y) $(RTE_OUTPUT)/lib/$(LIB) _CLEAN = doclean LDLIBS += $(EXECENV_LDLIBS-y) +CFLAGS += -DALLOW_EXPERIMENTAL_API .PHONY: all all: install
--
2.17.1
Re: [dpdk-dev] [PATCH v4] build: enable allow experimental API flag
Quoted 10 lines · On Fri, Apr 10, 2020 at 11:04 AM <[email protected]> wrote:
From: Pavan Nikhilesh <[email protected]>
Remove setting
ALLOW_EXPERIMENTAL_APIindividually for eachMakefileand meson.build instead enableALLOW_EXPERIMENTAL_APIflag across app, lib and drivers.
This changes reduces the clutter across the project while still maintaining the functionality ofALLOW_EXPERIMENTAL_APIi.e. warning external applications about experimental API usage.
Quoted 2 lines
Signed-off-by Pavan Nikhilesh <[email protected]>Acked-by Hemant Agrawal <[email protected]>
Little conflict on app/test-fib/Makefile that git-am handles fine (but Intel CI had trouble with).
app/test/meson.build dpdk_test = executable('dpdk-test', · line 399
Quoted 13 lines
app/test/meson.build +1
-1@@ -393,7 +393,7 @@ dpdk_test = executable('dpdk-test', test_sources, link_whole: link_libs, dependencies: test_dep_objs, - c_args: [cflags, '-DALLOW_EXPERIMENTAL_API'], + c_args: [cflags, default_cflags], install_rpath: driver_install_path, install: true)
That would pass the flags twice.
I will fix when applying as:
+ c_args: cflags,
Quoted 44 lines
drivers/mempool/octeontx2/Makefile +1
-1@@ -32,7 +30,7 @@ EXPORT_MAP := rte_mempool_octeontx2_version.map # SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_MEMPOOL) += \ otx2_mempool_ops.c \ - otx2_mempool.c \ + otx2_mempool.c \ otx2_mempool_irq.c \ otx2_mempool_debug.cdrivers/net/hinic/base/meson.build +1
-1@@ -12,7 +12,7 @@ sources = [ 'hinic_pmd_niccfg.c', 'hinic_pmd_nicio.c', 'hinic_pmd_wq.c', - 'hinic_pmd_mbox.c', + 'hinic_pmd_mbox.c', ] extra_flags = []drivers/net/hinic/meson.build +1
-1@@ -8,7 +8,7 @@ sources = files( 'hinic_pmd_ethdev.c', 'hinic_pmd_rx.c', 'hinic_pmd_tx.c', - 'hinic_pmd_flow.c', + 'hinic_pmd_flow.c', ) includes += include_directories('base')lib/librte_gso/meson.build +0
-0
lib/librte_gso/meson.build line 7
Quoted 7 lines
lib/librte_gso/meson.build +1
-1@@ -2,6 +2,6 @@ # Copyright(c) 2017 Intel Corporation sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c', - 'gso_tunnel_tcp4.c', 'rte_gso.c') + 'gso_tunnel_tcp4.c', 'rte_gso.c') headers = files('rte_gso.h') deps += ['ethdev']
Whitespace damage, will remove those hunks when applying.
Thanks.
Signature · 1 line
David Marchand
Re: [dpdk-dev] [PATCH v4] build: enable allow experimental API flag
Quoted 11 lines · David Marchand
Quoted 10 lines · On Fri, Apr 10, 2020 at 11:04 AM <[email protected]> wrote:
From: Pavan Nikhilesh <[email protected]>
Remove setting
ALLOW_EXPERIMENTAL_APIindividually for eachMakefileand meson.build instead enableALLOW_EXPERIMENTAL_APIflag across app, lib and drivers.
This changes reduces the clutter across the project while still maintaining the functionality ofALLOW_EXPERIMENTAL_APIi.e. warning external applications about experimental API usage.
Quoted 3 lines
Quoted 2 lines
Signed-off-by Pavan Nikhilesh <[email protected]>Acked-by Hemant Agrawal <[email protected]>
Unfortunately, after more tests, setting the flag in mk/rte.app.mk and mk/rte.lib.mk defeats the goal, because rte.extXXX.mk include rte.XXX.mk.
I'll post a v5 with the fix shortly.
Signature · 1 line
David Marchand