Skip to contentSkip to conversation

More reliable packages available for RHEL, CentOS, and Fedora

DISCUSSION Jason A. Donenfeld 2 participants 4 messages Apr 4, 2020 – Apr 15, 2020

lore
Share & tools
lore
#0 lore raw

Hey folks,

Joe Doss (cc'd) has maintained our DKMS packages for Fedora, RHEL, and CentOS for the last several years on his copr. Recently there have been some nice changes due to the 1.0ing of WireGuard.

- Fedora 32 will get Linux 5.6, so it won't need the DKMS package:
https://bodhi.fedoraproject.org/updates/FEDORA-2020-e8b6474ee5
- Fedora 31 and 30 will also get Linux 5.6 during the next month, so they won't need the DKMS package.
- Joe has joined ELRepo (cc'd) as a package maintainer, so RHEL/CentOS 7/8 will now have binary kmods built over there, signed with ELrepo's validating UEFI Secure Boot key, so enterprise users will have more reliable updates.
- I've contacted Red Hat about bringing WireGuard directly into the RHEL kernel; we'll see what happens there. (I've also reached out to Oracle regarding their enterprise situation.)
- The wireguard-tools package moved into Fedora-proper, which means it's now available on F32, F31, F30, and RHEL/CentOS 7,8 via EPEL.

The net result of this is that when F31 and F32 move to 5.6, we will no longer need the copr with DKMS, at all, and also that today, enterprise users now have a more reliable way to use WireGuard.

The most up to date instructions are on https://www.wireguard.com/install/
but the current situation is:

Fedora 32 now and Fedora 31,30 in a few weeks from now:

$ sudo dnf install wireguard-tools

Fedora 31,30 now, but not in a few weeks from now:

$ sudo dnf copr enable jdoss/wireguard
$ sudo dnf install wireguard-dkms wireguard-tools

RHEL 8:

$ sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
$ sudo yum install https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

CentOS 8:

$ sudo yum install elrepo-release epel-release
$ sudo yum install kmod-wireguard wireguard-tools

RHEL 7:

$ sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
$ sudo yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

CentOS 7:

$ sudo yum install epel-release
$ sudo yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

Thanks,
Jason

#1 lore raw

I was asked to loop in the ELRepo mailing list too. Below is the email I just sent out to wgml.

Quoted 56 lines · Jason A. Donenfeld

Hey folks,

Joe Doss (cc'd) has maintained our DKMS packages for Fedora, RHEL, and CentOS for the last several years on his copr. Recently there have been some nice changes due to the 1.0ing of WireGuard.

- Fedora 32 will get Linux 5.6, so it won't need the DKMS package:
https://bodhi.fedoraproject.org/updates/FEDORA-2020-e8b6474ee5
- Fedora 31 and 30 will also get Linux 5.6 during the next month, so they won't need the DKMS package.
- Joe has joined ELRepo (cc'd) as a package maintainer, so RHEL/CentOS 7/8 will now have binary kmods built over there, signed with ELrepo's validating UEFI Secure Boot key, so enterprise users will have more reliable updates.
- I've contacted Red Hat about bringing WireGuard directly into the RHEL kernel; we'll see what happens there. (I've also reached out to Oracle regarding their enterprise situation.)
- The wireguard-tools package moved into Fedora-proper, which means it's now available on F32, F31, F30, and RHEL/CentOS 7,8 via EPEL.

The net result of this is that when F31 and F32 move to 5.6, we will no longer need the copr with DKMS, at all, and also that today, enterprise users now have a more reliable way to use WireGuard.

The most up to date instructions are on https://www.wireguard.com/install/
but the current situation is:

Fedora 32 now and Fedora 31,30 in a few weeks from now:

$ sudo dnf install wireguard-tools

Fedora 31,30 now, but not in a few weeks from now:

$ sudo dnf copr enable jdoss/wireguard
$ sudo dnf install wireguard-dkms wireguard-tools

RHEL 8:

$ sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
$ sudo yum install https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

CentOS 8:

$ sudo yum install elrepo-release epel-release
$ sudo yum install kmod-wireguard wireguard-tools

RHEL 7:

$ sudo yum install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
$ sudo yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

CentOS 7:

$ sudo yum install epel-release
$ sudo yum install https://www.elrepo.org/elrepo-release-7.el7.elrepo.noarch.rpm
$ sudo yum install kmod-wireguard wireguard-tools

Thanks,
Jason

#2 lore raw
In reply to Jason A. Donenfeld

It turns out that ELRepo is a bit of a crumbling mess, unfortunately. FOR CENTOS USERS ONLY, the instructions in the previous email need to include:

$ sudo yum install yum-plugins-elrepo

Hopefully Red Hat will simply include WireGuard in RHEL 7 and 8, so that we won't have to deal with this. But for now, this appears to be the best we've got.

Jason

#3 lore raw
Quoted 4 lines · Jason A. Donenfeld

It turns out that ELRepo is a bit of a crumbling mess, unfortunately. FOR CENTOS USERS ONLY, the instructions in the previous email need to include:

Quoted 8 lines
$ sudo yum install yum-plugins-elrepo

Hopefully Red Hat will simply include WireGuard in RHEL 7 and 8, so that we won't have to deal with this. But for now, this appears to be the best we've got.

Jason

Actually that's:

yum install yum-plugin-elrepo

Cheers.