overlay: another test for dropping nlink below zero
PATCH 1/1 overlay: another test for dropping nlink below zero
This is a variant on test overlay/034.
This variant is mangling upper hardlinks instead of lower hardlinks and does not require the inodes index feature.
This is a regression test for kernel commit 83552eacdfc0 ("ovl: fix WARN_ON nlink drop to zero")
---
Eryu,
The kernel fix commit just got merged.
Thanks,
Amir.
tests/overlay/072 | 85 +++++++++++++++++++++++++++++++++++++++++++ tests/overlay/072.out | 2 + tests/overlay/group | 1 + 3 files changed, 88 insertions(+) create mode 100755 tests/overlay/072 create mode 100644 tests/overlay/072.out
tests/overlay/072 new file +85 -0
@@ -0,0 +1,85 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 CTERA Networks. All Rights Reserved. +# +# FS QA Test 072 +# +# Test overlay nlink when adding upper hardlinks. +# +# nlink of overlay inode could be dropped indefinitely by adding +# unaccounted upper hardlinks underneath a mounted overlay and +# trying to remove them. +# +# This is a variant of test overlay/034 with mangling of upper instead +# of lower hardlinks. Unlike overlay/034, this test does not require the +# inode index feature and will pass whether is it enabled or disabled +# by default. +# +# This is a regression test for kernel commit 83552eacdfc0 +# ("ovl: fix WARN_ON nlink drop to zero"). +# Without the fix, the test triggers +# WARN_ON(inode->i_nlink == 0) in drop_link(). +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs overlay +_supported_os Linux +_require_scratch + +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER + +# Remove all files from previous tests +_scratch_mkfs + +# Create lower hardlink +mkdir -p $upperdir +touch $upperdir/0 +ln $upperdir/0 $upperdir/1 + +_scratch_mount + +# Copy up lower hardlink - overlay inode nlink 2 is copied from lower +touch $SCRATCH_MNT/0 + +# Add lower hardlinks while overlay is mounted - overlay inode nlink +# is not being updated +ln $upperdir/0 $upperdir/2 +ln $upperdir/0 $upperdir/3 + +# Unlink the 2 un-accounted lower hardlinks - overlay inode nlinks +# drops 2 and may reach 0 if the situation is not detected +rm $SCRATCH_MNT/2 +rm $SCRATCH_MNT/3 + +# Check if getting ENOENT when trying to link !I_LINKABLE with nlink 0 +ln $SCRATCH_MNT/0 $SCRATCH_MNT/4 + +# Unlink all hardlinks - if overlay inode nlink is 0, this will trigger +# WARN_ON() in drop_nlink() +rm $SCRATCH_MNT/0 +rm $SCRATCH_MNT/1 +rm $SCRATCH_MNT/4 + +echo "Silence is golden" +status=0 +exit
tests/overlay/072.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 072 +Silence is golden
tests/overlay/group +1 -0
@@ -74,3 +74,4 @@ 069 auto quick copyup hardlink exportfs nested nonsamefs 070 auto quick copyup redirect nested 071 auto quick copyup redirect nested nonsamefs +072 auto quick copyup hardlink
Signature · 1 line
2.17.1
Quoted 75 lines · Amir Goldstein
This is a variant on test overlay/034.
This variant is mangling upper hardlinks instead of lower hardlinks and does not require the inodes index feature.
This is a regression test for kernel commit
83552eacdfc0("ovl: fixWARN_ONnlink drop to zero")Signed-off-by Amir Goldstein <[email protected]>---
Eryu,
The kernel fix commit just got merged.
Thanks,
Amir.tests/overlay/072 | 85 +++++++++++++++++++++++++++++++++++++++++++ tests/overlay/072.out | 2 + tests/overlay/group | 1 + 3 files changed, 88 insertions(+) create mode 100755 tests/overlay/072 create mode 100644 tests/overlay/072.outtests/overlay/072 new file +44
-0@@ -0,0 +1,85 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 CTERA Networks. All Rights Reserved. +# +# FS QA Test 072 +# +# Test overlay nlink when adding upper hardlinks. +# +# nlink of overlay inode could be dropped indefinitely by adding +# unaccounted upper hardlinks underneath a mounted overlay and +# trying to remove them. +# +# This is a variant of test overlay/034 with mangling of upper instead +# of lower hardlinks. Unlike overlay/034, this test does not require the +# inode index feature and will pass whether is it enabled or disabled +# by default. +# +# This is a regression test for kernel commit 83552eacdfc0 +# ("ovl: fix WARN_ON nlink drop to zero"). +# Without the fix, the test triggers +# WARN_ON(inode->i_nlink == 0) in drop_link(). +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here
tests/overlay/072 line 54
Quoted 10 lines
tests/overlay/072 new file +10
-0+_supported_fs overlay +_supported_os Linux +_require_scratch + +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER + +# Remove all files from previous tests +_scratch_mkfs + +# Create lower hardlink
It seems there're some stale comments that are copied from overlay/034, above is one of them, should be "Create upper hardlink"
tests/overlay/072 line 62
Quoted 8 lines
tests/overlay/072 new file +8
-0+mkdir -p $upperdir +touch $upperdir/0 +ln $upperdir/0 $upperdir/1 + +_scratch_mount + +# Copy up lower hardlink - overlay inode nlink 2 is copied from lower +touch $SCRATCH_MNT/0
There's no copyup, then do we need this touch at all?
tests/overlay/072 line 64
Quoted 2 lines
tests/overlay/072 new file +2
-0+ +# Add lower hardlinks while overlay is mounted - overlay inode nlink
Add upper hardlinks ...
tests/overlay/072 line 69
Quoted 5 lines
tests/overlay/072 new file +5
-0+# is not being updated +ln $upperdir/0 $upperdir/2 +ln $upperdir/0 $upperdir/3 + +# Unlink the 2 un-accounted lower hardlinks - overlay inode nlinks
^^^^^ upper?
Thanks,
Eryu
Quoted 36 lines
tests/overlay/072 new file +16
-0+# drops 2 and may reach 0 if the situation is not detected +rm $SCRATCH_MNT/2 +rm $SCRATCH_MNT/3 + +# Check if getting ENOENT when trying to link !I_LINKABLE with nlink 0 +ln $SCRATCH_MNT/0 $SCRATCH_MNT/4 + +# Unlink all hardlinks - if overlay inode nlink is 0, this will trigger +# WARN_ON() in drop_nlink() +rm $SCRATCH_MNT/0 +rm $SCRATCH_MNT/1 +rm $SCRATCH_MNT/4 + +echo "Silence is golden" +status=0 +exittests/overlay/072.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 072 +Silence is goldentests/overlay/group +1
-0@@ -74,3 +74,4 @@ 069 auto quick copyup hardlink exportfs nested nonsamefs 070 auto quick copyup redirect nested 071 auto quick copyup redirect nested nonsamefs +072 auto quick copyup hardlinkSignature · 1 line
2.17.1
Quoted 82 lines · Eryu Guan
Quoted 80 lines · Amir Goldstein
This is a variant on test overlay/034.
This variant is mangling upper hardlinks instead of lower hardlinks and does not require the inodes index feature.
This is a regression test for kernel commit
83552eacdfc0("ovl: fixWARN_ONnlink drop to zero")Signed-off-by Amir Goldstein <[email protected]>---
Eryu,
The kernel fix commit just got merged.
Thanks,
Amir.tests/overlay/072 | 85 +++++++++++++++++++++++++++++++++++++++++++ tests/overlay/072.out | 2 + tests/overlay/group | 1 + 3 files changed, 88 insertions(+) create mode 100755 tests/overlay/072 create mode 100644 tests/overlay/072.outtests/overlay/072 new file +49
-0@@ -0,0 +1,85 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020 CTERA Networks. All Rights Reserved. +# +# FS QA Test 072 +# +# Test overlay nlink when adding upper hardlinks. +# +# nlink of overlay inode could be dropped indefinitely by adding +# unaccounted upper hardlinks underneath a mounted overlay and +# trying to remove them. +# +# This is a variant of test overlay/034 with mangling of upper instead +# of lower hardlinks. Unlike overlay/034, this test does not require the +# inode index feature and will pass whether is it enabled or disabled +# by default. +# +# This is a regression test for kernel commit 83552eacdfc0 +# ("ovl: fix WARN_ON nlink drop to zero"). +# Without the fix, the test triggers +# WARN_ON(inode->i_nlink == 0) in drop_link(). +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# remove previous $seqres.full before test +rm -f $seqres.full + +# real QA test starts here +_supported_fs overlay +_supported_os Linux +_require_scratch + +upperdir=$OVL_BASE_SCRATCH_MNT/$OVL_UPPER
Quoted 9 lines
tests/overlay/072 line 54
Quoted 5 lines
tests/overlay/072 new file +5
-0+ +# Remove all files from previous tests +_scratch_mkfs + +# Create lower hardlinkIt seems there're some stale comments that are copied from overlay/034, above is one of them, should be "Create upper hardlink"
Yep. I'll fix those up.
Quoted 10 lines
tests/overlay/072 line 62
Quoted 8 lines
tests/overlay/072 new file +8
-0+mkdir -p $upperdir +touch $upperdir/0 +ln $upperdir/0 $upperdir/1 + +_scratch_mount + +# Copy up lower hardlink - overlay inode nlink 2 is copied from lower +touch $SCRATCH_MNT/0There's no copyup, then do we need this touch at all?
We do not need touch, but we do need something to do the lookup and read upper nlink before modifying it underneath.
Good points.
I'll send fixed v2.
Thanks,
Amir.