drm/panel: update backlight support for samsung panels
Subsystems (3)
cover drm/panel: update backlight support for samsung panels
Update the backlight handling in three samsung panels.
- Use devm_ functions to automate cleanup
- Utilize backlight support in drm_panel
- Introduce a register backlight helper in all panels Using the same pattern in all panels makes it simpler to read the code.
With this change the backlight handling in these panels is now much more like what we see in other panels.
Testing or any other feedback appreciated!
Sam
Sam Ravnborg (3):
drm/panel: update backlight handling for samsung-s6e3ha2 drm/panel: update backlight handling for samsung-s6e63j0x03 drm/panel: update backlight handling for samsung-s6e63m0
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 55 +++++++++++++----------- drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 +++++++++++++----------- drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 20 ++++----- 3 files changed, 68 insertions(+), 62 deletions(-)
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/3 drm/panel: update backlight handling for samsung-s6e3ha2
The samsung-s6e3ha2 had a local way to handle backlight.
Update the driver to use a devm_ based register function and utilize drm_panel backlight support. The changes results in a simpler driver with the same functionality.
--- drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 55 +++++++++++-------- 1 file changed, 31 insertions(+), 24 deletions(-)
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c +31 -24
@@ -233,7 +233,6 @@ struct s6e3ha2_panel_desc {struct s6e3ha2 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;
@@ -415,7 +414,7 @@ static int s6e3ha2_get_brightness(struct backlight_device *bl_dev) static int s6e3ha2_set_vint(struct s6e3ha2 *ctx) { - struct backlight_device *bl_dev = ctx->bl_dev; + struct backlight_device *bl_dev = ctx->panel.backlight; unsigned int brightness = bl_dev->props.brightness; unsigned char data[] = { 0xf4, 0x8b, vint_table[brightness * (S6E3HA2_VINT_STATUS_MAX - 1) /
@@ -432,7 +431,7 @@ static unsigned int s6e3ha2_get_brightness_index(unsigned int brightness)static int s6e3ha2_update_gamma (struct s6e3ha2 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e3ha2_get_brightness_index (brightness);u8 data[S6E3HA2_GAMMA_CMD_CNT +1 ] = {0xca , };int ret;
@@ -476,6 +475,30 @@ static const struct backlight_ops s6e3ha2_bl_ops = { .update_status = s6e3ha2_set_brightness, }; +static int s6e3ha2_backlight_register (struct s6e3ha2 *ctx) +{ +struct backlight_properties props = { + .type =BACKLIGHT_RAW , + .brightness =S6E3HA2_DEFAULT_BRIGHTNESS , + .max_brightness =S6E3HA2_MAX_BRIGHTNESS , + }; +struct backlight_device *backlight; +struct device *dev = ctx->dev; +int ret =0 ; + + backlight =devm_backlight_device_register (dev,"panel" , dev, ctx, + &s6e3ha2_bl_ops, + &props); +if (IS_ERR (backlight)) { + ret =PTR_ERR (backlight); +DRM_DEV_ERROR (dev,"error registering backlight device (%d)\n" , + ret); + } + ctx->panel.backlight = backlight; + +return ret; +} +static int s6e3ha2_panel_init (struct s6e3ha2 *ctx) {struct mipi_dsi_device *dsi =to_mipi_dsi_device (ctx->dev);
@@ -509,7 +532,6 @@ static int s6e3ha2_disable(struct drm_panel *panel)s6e3ha2_call_write_func (ret,mipi_dsi_dcs_set_display_off (dsi));msleep (40 ); - ctx->bl_dev->props.power =FB_BLANK_NORMAL ;return 0 ; }
@@ -555,8 +577,6 @@ static int s6e3ha2_prepare(struct drm_panel *panel)if (ret <0 ) goto err; - ctx->bl_dev->props.power =FB_BLANK_NORMAL ; -return 0 ; err:
@@ -588,7 +608,6 @@ static int s6e3ha2_enable(struct drm_panel *panel)s6e3ha2_call_write_func (ret,s6e3ha2_te_start_setting (ctx));/* brightness setting */ -s6e3ha2_call_write_func (ret,s6e3ha2_set_brightness (ctx->bl_dev));s6e3ha2_call_write_func (ret,s6e3ha2_aor_control (ctx));s6e3ha2_call_write_func (ret,s6e3ha2_caps_elvss_set (ctx));s6e3ha2_call_write_func (ret,s6e3ha2_gamma_update (ctx));
@@ -602,7 +621,6 @@ static int s6e3ha2_enable(struct drm_panel *panel)s6e3ha2_call_write_func (ret,s6e3ha2_test_key_off_f0 (ctx));s6e3ha2_call_write_func (ret,mipi_dsi_dcs_set_display_on (dsi)); - ctx->bl_dev->props.power =FB_BLANK_UNBLANK ;return 0 ; }
@@ -721,23 +739,16 @@ static int s6e3ha2_probe(struct mipi_dsi_device *dsi)return PTR_ERR (ctx->enable_gpio); } - ctx->bl_dev =backlight_device_register ("s6e3ha2" , dev, ctx, - &s6e3ha2_bl_ops,NULL ); -if (IS_ERR (ctx->bl_dev)) { -dev_err (dev,"failed to register backlight device\n" ); -return PTR_ERR (ctx->bl_dev); - } - - ctx->bl_dev->props.max_brightness =S6E3HA2_MAX_BRIGHTNESS ; - ctx->bl_dev->props.brightness =S6E3HA2_DEFAULT_BRIGHTNESS ; - ctx->bl_dev->props.power =FB_BLANK_POWERDOWN ; -drm_panel_init (&ctx->panel, dev, &s6e3ha2_drm_funcs,DRM_MODE_CONNECTOR_DSI ); + ret =s6e3ha2_backlight_register (ctx); +if (ret) +return ret; + ret =drm_panel_add (&ctx->panel);if (ret <0 ) - goto unregister_backlight; +return ret; ret =mipi_dsi_attach (dsi);if (ret <0 )
@@ -748,9 +759,6 @@ static int s6e3ha2_probe(struct mipi_dsi_device *dsi) remove_panel:drm_panel_remove (&ctx->panel); -unregister_backlight: -backlight_device_unregister (ctx->bl_dev); -return ret; }
@@ -760,7 +768,6 @@ static int s6e3ha2_remove(struct mipi_dsi_device *dsi)mipi_dsi_detach (dsi);drm_panel_remove (&ctx->panel); -backlight_device_unregister (ctx->bl_dev);return 0 ; }
Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 3/3 drm/panel: update backlight handling for samsung-s6e63m0
In reply to Sam RavnborgThe samsung-s6e63m0 had a local way to handle backlight.
Update the driver to use a devm_ based register function and utilize drm_panel backlight support. The changes results in a simpler driver with the same functionality.
--- drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 20 ++++++++----------- 1 file changed, 8 insertions(+), 12 deletions(-)
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c +8 -12
@@ -89,7 +89,6 @@ static u8 const s6e63m0_gamma_22[NUM_GAMMA_LEVELS][GAMMA_TABLE_COUNT] = {struct s6e63m0 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;
@@ -293,8 +292,6 @@ static int s6e63m0_disable(struct drm_panel *panel)if (!ctx->enabled)return 0 ; -backlight_disable (ctx->bl_dev); -s6e63m0_dcs_write_seq_static (ctx,MIPI_DCS_ENTER_SLEEP_MODE );msleep (200 );
@@ -355,8 +352,6 @@ static int s6e63m0_enable(struct drm_panel *panel)s6e63m0_dcs_write_seq_static (ctx,MIPI_DCS_SET_DISPLAY_ON ); -backlight_enable (ctx->bl_dev); - ctx->enabled = true;return 0 ;
@@ -394,7 +389,6 @@ static const struct drm_panel_funcs s6e63m0_drm_funcs = {static int s6e63m0_set_brightness (struct backlight_device *bd) {struct s6e63m0 *ctx =bl_get_data (bd); -int brightness = bd->props.brightness;/* disable and set new gamma */
@@ -416,19 +410,21 @@ static int s6e63m0_backlight_register(struct s6e63m0 *ctx)struct backlight_properties props = { .type =BACKLIGHT_RAW , .brightness =MAX_BRIGHTNESS , - .max_brightness =MAX_BRIGHTNESS + .max_brightness =MAX_BRIGHTNESS , }; +struct backlight_device *backlight;struct device *dev = ctx->dev;int ret =0 ; - ctx->bl_dev =devm_backlight_device_register (dev,"panel" , dev, ctx, - &s6e63m0_backlight_ops, - &props); -if (IS_ERR (ctx->bl_dev)) { - ret =PTR_ERR (ctx->bl_dev); + backlight =devm_backlight_device_register (dev,"panel" , dev, ctx, + &s6e63m0_backlight_ops, + &props); +if (IS_ERR (backlight)) { + ret =PTR_ERR (backlight);DRM_DEV_ERROR (dev,"error registering backlight device (%d)\n" , ret); } + ctx->panel.backlight = backlight;return ret; }
Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/3 drm/panel: update backlight handling for samsung-s6e63j0x03
In reply to Sam RavnborgThe samsung-s6e63j0x03 had a local way to handle backlight.
Update the driver to use a devm_ based register function and utilize drm_panel backlight support. The changes results in a simpler driver with the same functionality.
--- .../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 ++++++++++--------- 1 file changed, 29 insertions(+), 26 deletions(-)
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +29 -26
@@ -36,7 +36,6 @@struct s6e63j0x03 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;
@@ -184,7 +183,7 @@ static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)static int s6e63j0x03_update_gamma (struct s6e63j0x03 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e63j0x03_get_brightness_index (brightness);int ret;
@@ -217,6 +216,30 @@ static const struct backlight_ops s6e63j0x03_bl_ops = { .update_status = s6e63j0x03_set_brightness, }; +static int s6e63j0x03_backlight_register (struct s6e63j0x03 *ctx) +{ +struct backlight_properties props = { + .type =BACKLIGHT_RAW , + .brightness =DEFAULT_BRIGHTNESS , + .max_brightness =MAX_BRIGHTNESS , + }; +struct backlight_device *backlight; +struct device *dev = ctx->dev; +int ret =0 ; + + backlight =devm_backlight_device_register (dev,"panel" , dev, ctx, + &s6e63j0x03_bl_ops, + &props); +if (IS_ERR (backlight)) { + ret =PTR_ERR (backlight); +DRM_DEV_ERROR (dev,"error registering backlight device (%d)\n" , + ret); + } + ctx->panel.backlight = backlight; + +return ret; +} +static int s6e63j0x03_disable (struct drm_panel *panel) {struct s6e63j0x03 *ctx =panel_to_s6e63j0x03 (panel);
@@ -227,8 +250,6 @@ static int s6e63j0x03_disable(struct drm_panel *panel)if (ret <0 )return ret; - ctx->bl_dev->props.power =FB_BLANK_NORMAL ; - ret =mipi_dsi_dcs_enter_sleep_mode (dsi);if (ret <0 )return ret;
@@ -247,8 +268,6 @@ static int s6e63j0x03_unprepare(struct drm_panel *panel)if (ret <0 )return ret; - ctx->bl_dev->props.power =FB_BLANK_POWERDOWN ; -return 0 ; }
@@ -334,8 +353,6 @@ static int s6e63j0x03_prepare(struct drm_panel *panel)if (ret <0 ) goto err; - ctx->bl_dev->props.power =FB_BLANK_NORMAL ; -return 0 ; err:
@@ -395,8 +412,6 @@ static int s6e63j0x03_enable(struct drm_panel *panel)if (ret <0 )return ret; - ctx->bl_dev->props.power =FB_BLANK_UNBLANK ; -return 0 ; }
@@ -469,20 +484,13 @@ static int s6e63j0x03_probe(struct mipi_dsi_device *dsi)drm_panel_init (&ctx->panel, dev, &s6e63j0x03_funcs,DRM_MODE_CONNECTOR_DSI ); - ctx->bl_dev =backlight_device_register ("s6e63j0x03" , dev, ctx, - &s6e63j0x03_bl_ops,NULL ); -if (IS_ERR (ctx->bl_dev)) { -dev_err (dev,"failed to register backlight device\n" ); -return PTR_ERR (ctx->bl_dev); - } - - ctx->bl_dev->props.max_brightness =MAX_BRIGHTNESS ; - ctx->bl_dev->props.brightness =DEFAULT_BRIGHTNESS ; - ctx->bl_dev->props.power =FB_BLANK_POWERDOWN ; + ret =s6e63j0x03_backlight_register (ctx); +if (ret) +return ret; ret =drm_panel_add (&ctx->panel);if (ret <0 ) - goto unregister_backlight; +return ret; ret =mipi_dsi_attach (dsi);if (ret <0 )
@@ -493,9 +501,6 @@ static int s6e63j0x03_probe(struct mipi_dsi_device *dsi) remove_panel:drm_panel_remove (&ctx->panel); -unregister_backlight: -backlight_device_unregister (ctx->bl_dev); -return ret; }
@@ -506,8 +511,6 @@ static int s6e63j0x03_remove(struct mipi_dsi_device *dsi)mipi_dsi_detach (dsi);drm_panel_remove (&ctx->panel); -backlight_device_unregister (ctx->bl_dev); -return 0 ; }
Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v1 2/3] drm/panel: update backlight handling for samsung-s6e63j0x03
Quoted 40 lines · Sam Ravnborg
The samsung-s6e63j0x03 had a local way to handle backlight.
Update the driver to use a
devm_based register function and utilizedrm_panelbacklight support. The changes results in a simpler driver with the same functionality.Signed-off-by Sam Ravnborg <[email protected]>Cc Joonas Kylmälä <[email protected]>Cc Andrzej Hajda <[email protected]>Cc Thierry Reding <[email protected]>Cc Inki Dae <[email protected]>Cc Hyungwon Hwang <[email protected]>Cc Hoegeun Kwon <[email protected]>--- .../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 ++++++++++--------- 1 file changed, 29 insertions(+), 26 deletions(-)drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +1
-2@@ -36,7 +36,6 @@struct s6e63j0x03 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;@@ -184,7 +183,7 @@ static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)static int s6e63j0x03_update_gamma (struct s6e63j0x03 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e63j0x03_get_brightness_index (brightness);int ret;
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c static const struct backlight_ops s6e63j0x03_bl_ops = { · line 221
Quoted 6 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +3
-0@@ -217,6 +216,30 @@ static const struct backlight_ops s6e63j0x03_bl_ops = { .update_status = s6e63j0x03_set_brightness, }; +static int s6e63j0x03_backlight_register (struct s6e63j0x03 *ctx) +{ +struct backlight_properties props = {
Pretty sure we can (should really) make the props const.
Quick grep through drm, shows that there're other offenders, so might as well do that in separate series.
Seems like other panels could follow suite, with later series of course.
Back on topic, it's not immediately obvious why the FB_BLANK_* handling is safe to remove. Please add small mention in the commit log mentioning why.
-Emil
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v1 2/3] drm/panel: update backlight handling for samsung-s6e63j0x03
Hi Emil.
Thanks for your feedback!
Quoted 40 lines · Emil Velikov
Quoted 39 lines · Sam Ravnborg
The samsung-s6e63j0x03 had a local way to handle backlight.
Update the driver to use a
devm_based register function and utilizedrm_panelbacklight support. The changes results in a simpler driver with the same functionality.Signed-off-by Sam Ravnborg <[email protected]>Cc Joonas Kylmälä <[email protected]>Cc Andrzej Hajda <[email protected]>Cc Thierry Reding <[email protected]>Cc Inki Dae <[email protected]>Cc Hyungwon Hwang <[email protected]>Cc Hoegeun Kwon <[email protected]>--- .../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 ++++++++++--------- 1 file changed, 29 insertions(+), 26 deletions(-)drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +1
-2@@ -36,7 +36,6 @@struct s6e63j0x03 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;@@ -184,7 +183,7 @@ static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)static int s6e63j0x03_update_gamma (struct s6e63j0x03 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e63j0x03_get_brightness_index (brightness);int ret;
Quoted 8 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c static const struct backlight_ops s6e63j0x03_bl_ops = { · line 221
Quoted 7 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +3
-0@@ -217,6 +216,30 @@ static const struct backlight_ops s6e63j0x03_bl_ops = { .update_status = s6e63j0x03_set_brightness, }; +static int s6e63j0x03_backlight_register (struct s6e63j0x03 *ctx) +{ +struct backlight_properties props = {Pretty sure we can (should really) make the props const.
Thanks, will fix either in v2 or when I apply.
Quoted 8 lines
Quick grep through drm, shows that there're other offenders, so might as well do that in separate series.
Seems like other panels could follow suite, with later series of course.Back on topic, it's not immediately obvious why the FB_BLANK_* handling is safe to remove. Please add small mention in the commit log mentioning why.
Maybe because it is not so?
Lets take a closer look.backlight_enable() and backlight_disable() are called from drm_panel - because drm_panel->backlight is assigned.
drm_panel_prepare:
OLD: ctx->bl_dev->props.power = FB_BLANK_NORMAL;
NEW:
drm_panel_enable:
OLD: ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
NEW: backlight_enable() =>
bd->props.power = FB_BLANK_UNBLANK; bd->props.fb_blank = FB_BLANK_UNBLANK; bd->props.state &= ~BL_CORE_FBBLANK;
drm_panel_disable:
OLD: ctx->bl_dev->props.power = FB_BLANK_NORMAL;
NEW: backlight_disable() =>
bd->props.power = FB_BLANK_POWERDOWN;
bd->props.fb_blank = FB_BLANK_POWERDOWN;
bd->props.state |= BL_CORE_FBBLANK;drm_panel_unprepare:
OLD: ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
NEW:
So old and new code are not exactly the same.
But with my (limited) backlight understanding this should work as expected - and it works for many other drivers. So if this does not work, then we should look at the backlight handling and not do workarounds in the driver.
I will summarize the above in the individual changelogs.
Sam
Quoted 2 lines
-Emil
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v1 2/3] drm/panel: update backlight handling for samsung-s6e63j0x03
Quoted 94 lines · Sam Ravnborg
Hi Emil.
Thanks for your feedback!
Quoted 40 lines · Emil Velikov
Quoted 39 lines · Sam Ravnborg
The samsung-s6e63j0x03 had a local way to handle backlight.
Update the driver to use a
devm_based register function and utilizedrm_panelbacklight support. The changes results in a simpler driver with the same functionality.Signed-off-by Sam Ravnborg <[email protected]>Cc Joonas Kylmälä <[email protected]>Cc Andrzej Hajda <[email protected]>Cc Thierry Reding <[email protected]>Cc Inki Dae <[email protected]>Cc Hyungwon Hwang <[email protected]>Cc Hoegeun Kwon <[email protected]>--- .../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 ++++++++++--------- 1 file changed, 29 insertions(+), 26 deletions(-)drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +1
-2@@ -36,7 +36,6 @@struct s6e63j0x03 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;@@ -184,7 +183,7 @@ static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)static int s6e63j0x03_update_gamma (struct s6e63j0x03 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e63j0x03_get_brightness_index (brightness);int ret;Quoted 8 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c static const struct backlight_ops s6e63j0x03_bl_ops = { · line 221
Quoted 7 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +3
-0@@ -217,6 +216,30 @@ static const struct backlight_ops s6e63j0x03_bl_ops = { .update_status = s6e63j0x03_set_brightness, }; +static int s6e63j0x03_backlight_register (struct s6e63j0x03 *ctx) +{ +struct backlight_properties props = {Pretty sure we can (should really) make the props const.
Thanks, will fix either in v2 or when I apply.
Quoted 8 lines
Quick grep through drm, shows that there're other offenders, so might as well do that in separate series.
Seems like other panels could follow suite, with later series of course.Back on topic, it's not immediately obvious why the FB_BLANK_* handling is safe to remove. Please add small mention in the commit log mentioning why.
Maybe because it is not so?
Lets take a closer look.backlight_enable()andbacklight_disable()are called fromdrm_panel- becausedrm_panel->backlightis assigned.
drm_panel_prepare:
OLD:ctx->bl_dev->props.power=FB_BLANK_NORMAL;
NEW:
drm_panel_enable:OLD: ctx->bl_dev->props.power = FB_BLANK_UNBLANK; NEW: backlight_enable() => bd->props.power = FB_BLANK_UNBLANK; bd->props.fb_blank = FB_BLANK_UNBLANK; bd->props.state &= ~BL_CORE_FBBLANK;
drm_panel_disable:OLD: ctx->bl_dev->props.power = FB_BLANK_NORMAL; NEW: backlight_disable() => bd->props.power = FB_BLANK_POWERDOWN; bd->props.fb_blank = FB_BLANK_POWERDOWN; bd->props.state |= BL_CORE_FBBLANK;
drm_panel_unprepare:
OLD:ctx->bl_dev->props.power=FB_BLANK_POWERDOWN;
NEW:
Quoted 7 lines
So old and new code are not exactly the same.
But with my (limited) backlight understanding this should work as expected - and it works for many other drivers. So if this does not work, then we should look at the backlight handling and not do workarounds in the driver.
AFAICT the new states are actually more consistent.
Quoted 2 lines
I will summarize the above in the individual changelogs.
That'll be perfect thanks.
Meanwhile I'll try to finish my cleanup bd->props states series \o/
-Emil
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v1 2/3] drm/panel: update backlight handling for samsung-s6e63j0x03
In reply to Sam RavnborgQuoted 93 lines · Sam Ravnborg
Hi Emil.
Thanks for your feedback!
Quoted 40 lines · Emil Velikov
Quoted 39 lines · Sam Ravnborg
The samsung-s6e63j0x03 had a local way to handle backlight.
Update the driver to use a
devm_based register function and utilizedrm_panelbacklight support. The changes results in a simpler driver with the same functionality.Signed-off-by Sam Ravnborg <[email protected]>Cc Joonas Kylmälä <[email protected]>Cc Andrzej Hajda <[email protected]>Cc Thierry Reding <[email protected]>Cc Inki Dae <[email protected]>Cc Hyungwon Hwang <[email protected]>Cc Hoegeun Kwon <[email protected]>--- .../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 55 ++++++++++--------- 1 file changed, 29 insertions(+), 26 deletions(-)drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +1
-2@@ -36,7 +36,6 @@struct s6e63j0x03 {struct device *dev;struct drm_panel panel; -struct backlight_device *bl_dev;struct regulator_bulk_data supplies[2 ];struct gpio_desc *reset_gpio;@@ -184,7 +183,7 @@ static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)static int s6e63j0x03_update_gamma (struct s6e63j0x03 *ctx,unsigned int brightness) { -struct backlight_device *bl_dev = ctx->bl_dev; +struct backlight_device *bl_dev = ctx->panel.backlight;unsigned int index =s6e63j0x03_get_brightness_index (brightness);int ret;Quoted 8 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c static const struct backlight_ops s6e63j0x03_bl_ops = { · line 221
Quoted 7 lines
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c +3
-0@@ -217,6 +216,30 @@ static const struct backlight_ops s6e63j0x03_bl_ops = { .update_status = s6e63j0x03_set_brightness, }; +static int s6e63j0x03_backlight_register (struct s6e63j0x03 *ctx) +{ +struct backlight_properties props = {Pretty sure we can (should really) make the props const.
Thanks, will fix either in v2 or when I apply.
Quoted 8 lines
Quick grep through drm, shows that there're other offenders, so might as well do that in separate series.
Seems like other panels could follow suite, with later series of course.Back on topic, it's not immediately obvious why the FB_BLANK_* handling is safe to remove. Please add small mention in the commit log mentioning why.
Maybe because it is not so?
Lets take a closer look.backlight_enable()andbacklight_disable()are called fromdrm_panel- becausedrm_panel->backlightis assigned.
drm_panel_prepare:
OLD:ctx->bl_dev->props.power=FB_BLANK_NORMAL;
NEW:
drm_panel_enable:
OLD:ctx->bl_dev->props.power=FB_BLANK_UNBLANK;
NEW:backlight_enable()=>bd->props.power = FB_BLANK_UNBLANK; bd->props.fb_blank = FB_BLANK_UNBLANK; bd->props.state &= ~BL_CORE_FBBLANK;
drm_panel_disable:
OLD:ctx->bl_dev->props.power=FB_BLANK_NORMAL;
NEW:backlight_disable()=>bd->props.power = FB_BLANK_POWERDOWN; bd->props.fb_blank = FB_BLANK_POWERDOWN; bd->props.state |= BL_CORE_FBBLANK;
drm_panel_unprepare:
OLD:ctx->bl_dev->props.power=FB_BLANK_POWERDOWN;
NEW:
Quoted 8 lines
So old and new code are not exactly the same.
But with my (limited) backlight understanding this should work as expected - and it works for many other drivers. So if this does not work, then we should look at the backlight handling and not do workarounds in the driver.
I will summarize the above in the individual changelogs.
This is a long-term conversion even listed in the todo.rst. Backlight has 3 different flags that control on/off, and it's a complete mess. There's uber-arcane rules as to in which order backlight drivers should be following them (I think it's a logical and, but not sure), the goal is to condense it all down to 1 on/off switch. todo.rst has the full plan.
So moving stuff over to backlight_enable/disable() functions is Very Good. -Daniel
Quoted 10 lines
Sam
Quoted 2 lines
-Emil
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel