drm/dp: DRM DP helper for reading Ignore MSA from DPCD
PATCH v4 1/3 drm/dp: DRM DP helper for reading Ignore MSA from DPCD
DP sink device sets the Ignore MSA bit in its DP_DOWNSTREAM_PORT_COUNT register to indicate its ability to ignore the MSA video timing parameters and its ability to support seamless video timing change over a range of timing exposed by DisplayID and EDID.
This is required for the sink to indicate that it is Adaptive sync capable.
v3:
* Fi the typo in commit message (Manasi)
v2:
* Rename to describe what the function does (Jani Nikula)
--- include/drm/drm_dp_helper.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/drm/drm_dp_helper.h +8 -0
@@ -1454,6 +1454,14 @@ drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE])DP_ALTERNATE_SCRAMBLER_RESET_CAP ; } +/* Ignore MSA timing for Adaptive Sync support on DP 1.4 */ +static inline bool +drm_dp_sink_can_do_video_without_timing_msa (const u8 dpcd[DP_RECEIVER_CAP_SIZE ]) +{ +return dpcd[DP_DOWN_STREAM_PORT_COUNT ] & +DP_MSA_TIMING_PAR_IGNORED ; +} +/* * DisplayPort AUX channel */
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 2/3 drm/i915/dp: Attach and set drm connector VRR property
From: Aditya Swarup <[email protected]>
This function sets the VRR property for connector based on the platform support, EDID monitor range and DP sink DPCD capability of outputing video without msa timing information.
v4:
* Rebase (Mansi)
v3:
* intel_dp_is_vrr_capable can be used for debugfs, make it non static (Manasi)
v2:
* Just set this in intel_dp_get_modes instead of new hook (Jani)
--- drivers/gpu/drm/i915/display/intel_dp.c | 24 ++++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dp.h | 2 ++ 2 files changed, 26 insertions(+)
drivers/gpu/drm/i915/display/intel_dp.c +24 -0
@@ -6412,6 +6412,23 @@ intel_dp_force(struct drm_connector *connector)intel_display_power_put (dev_priv, aux_domain, wakeref); } +bool intel_dp_is_vrr_capable (struct drm_connector *connector) +{ +struct intel_dp *intel_dp =intel_attached_dp (to_intel_connector (connector)); +const struct drm_display_info *info = &connector->display_info; +struct drm_i915_private *dev_priv =to_i915 (connector->dev); + +/* +* DP Sink is capable of Variable refresh video timings if +* Ignore MSA bit is set in DPCD. +* EDID monitor range also should be atleast 10 for reasonable +* Adaptive sync/ VRR end user experience. +*/ +return INTEL_GEN (dev_priv) >=12 && +drm_dp_sink_can_do_video_without_timing_msa (intel_dp->dpcd) && + info->monitor_range.max_vfreq - info->monitor_range.min_vfreq >10 ; +} +static int intel_dp_get_modes (struct drm_connector *connector) {struct intel_connector *intel_connector =to_intel_connector (connector);
@@ -6422,6 +6439,10 @@ static int intel_dp_get_modes(struct drm_connector *connector)int ret =intel_connector_update_modes (connector, edid);if (ret)return ret; + +if (intel_dp_is_vrr_capable (connector)) +drm_connector_set_vrr_capable_property (connector, + true); }/* if eDP has no EDID, fall back to fixed mode */
@@ -7503,6 +7524,9 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect connector->state->scaling_mode =DRM_MODE_SCALE_ASPECT ; } + +if (INTEL_GEN (dev_priv) >=12 ) +drm_connector_attach_vrr_capable_property (connector); }static void intel_dp_init_panel_power_timestamps (struct intel_dp *intel_dp)
drivers/gpu/drm/i915/display/intel_dp.h +2 -0
@@ -14,6 +14,7 @@ enum pipe;enum port ;struct drm_connector_state ;struct drm_encoder ; +struct drm_connector ;struct drm_i915_private ;struct drm_modeset_acquire_ctx ;struct intel_connector ;
@@ -119,6 +120,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder, bool enable, const struct drm_connector_state *conn_state);bool intel_digital_port_connected (struct intel_encoder *encoder);void intel_dp_process_phy_request (struct intel_dp *intel_dp); +bool intel_dp_is_vrr_capable (struct drm_connector *connector);static inline unsigned int intel_dp_unused_lane_mask (int lane_count) {
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 3/3 drm/i915/dp: Expose connector VRR info via debugfs
In reply to Manasi NavareFrom: Bhanuprakash Modem <[email protected]>
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/i915_vrr_info
v3:
* Remove the unnecessary debug print (Manasi) v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
--- .../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display_debugfs.c +21 -1
@@ -2096,6 +2096,21 @@ static const struct file_operations i915_dsc_fec_support_fops = { .write = i915_dsc_fec_support_write }; +static int i915_vrr_info_show (struct seq_file *m,void *data) +{ +struct drm_connector *connector = m->private; + +if (connector->status != connector_status_connected) +return -ENODEV ; + +seq_printf (m,"Vrr_capable: %s\n" ,yesno (intel_dp_is_vrr_capable (connector))); +seq_printf (m,"Min: %u\n" , (u8 )connector->display_info.monitor_range.min_vfreq); +seq_printf (m,"Max: %u\n" , (u8 )connector->display_info.monitor_range.max_vfreq); + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (i915_vrr_info); +/** * intel_connector_debugfs_add - add i915 specific connector debugfs files * @connector: pointer to a registered drm_connector
@@ -2130,9 +2145,14 @@ int intel_connector_debugfs_add(struct drm_connector *connector)if (INTEL_GEN (dev_priv) >=10 && (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort || - connector->connector_type == DRM_MODE_CONNECTOR_eDP)) + connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {debugfs_create_file ("i915_dsc_fec_support" ,S_IRUGO , root, connector, &i915_dsc_fec_support_fops); +if (INTEL_GEN (dev_priv) >=12 ) +debugfs_create_file ("i915_vrr_info" ,S_IRUGO , + root, connector, &i915_vrr_info_fops); + } +return 0 ; }
Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v4 3/3] drm/i915/dp: Expose connector VRR info via debugfs
Quoted 20 lines · Manasi Navare
From: Bhanuprakash Modem <[email protected]>
[Why]
It's useful to know the min and max vrr range for IGT testing.[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".Example usage: cat
/sys/kernel/debug/dri/0/DP-1/i915_vrr_infov3:
* Remove the unnecessary debug print (Manasi) v2:
* Fix the typo inmax_vfreq(Manasi)
* Change the name of node toi915_vrr_infoso we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
Quoted 5 lines
Signed-off-by Bhanuprakash Modem <[email protected]>Signed-off-by Manasi Navare <[email protected]>Cc Jani Nikula <[email protected]>Cc Ville Syrjälä <[email protected]>Tested-by Manasi Navare <[email protected]>
So if I'm understanding things correctly AMD butchered the VRR stuff and only exposes it when:
- VRR_ENABLED is set
- _and_ you're using the legacy page_flip path, atomic flip doesn't support it
- _and_ the PAGE_FLIP_ASYNC flag is set.
That's pretty bonkers uapi, and I think before we add a new driver we need to figure out how to make this work. Works case we might need a revert hammer for the amdgpu side and new VRR properties so we're not tricking any existing userspace into something where stuff then would break.
But I'm hoping we can do a bit more clever than that. Or maybe I'm just wrong on how amdgpu vrr works.
Adding amd folks.
-Daniel
Quoted 53 lines
--- .../drm/i915/display/intel_display_debugfs.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_display_debugfs.c +21
-1@@ -2096,6 +2096,21 @@ static const struct file_operations i915_dsc_fec_support_fops = { .write = i915_dsc_fec_support_write }; +static int i915_vrr_info_show (struct seq_file *m,void *data) +{ +struct drm_connector *connector = m->private; + +if (connector->status != connector_status_connected) +return -ENODEV ; + +seq_printf (m,"Vrr_capable: %s\n" ,yesno (intel_dp_is_vrr_capable (connector))); +seq_printf (m,"Min: %u\n" , (u8 )connector->display_info.monitor_range.min_vfreq); +seq_printf (m,"Max: %u\n" , (u8 )connector->display_info.monitor_range.max_vfreq); + +return 0 ; +} +DEFINE_SHOW_ATTRIBUTE (i915_vrr_info); +/** * intel_connector_debugfs_add - add i915 specific connector debugfs files * @connector: pointer to a registered drm_connector @@ -2130,9 +2145,14 @@ int intel_connector_debugfs_add(struct drm_connector *connector)if (INTEL_GEN (dev_priv) >=10 && (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort || - connector->connector_type == DRM_MODE_CONNECTOR_eDP)) + connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {debugfs_create_file ("i915_dsc_fec_support" ,S_IRUGO , root, connector, &i915_dsc_fec_support_fops); +if (INTEL_GEN (dev_priv) >=12 ) +debugfs_create_file ("i915_vrr_info" ,S_IRUGO , + root, connector, &i915_vrr_info_fops); + } +return 0 ; }Signature · 6 lines
2.19.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [Intel-gfx] [PATCH v4 3/3] drm/i915/dp: Expose connector VRR info via debugfs
Quoted 27 lines · Daniel Vetter
Quoted 20 lines · Manasi Navare
From: Bhanuprakash Modem <[email protected]>
[Why]
It's useful to know the min and max vrr range for IGT testing.[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".Example usage: cat
/sys/kernel/debug/dri/0/DP-1/i915_vrr_infov3:
* Remove the unnecessary debug print (Manasi) v2:
* Fix the typo inmax_vfreq(Manasi)
* Change the name of node toi915_vrr_infoso we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)Quoted 5 lines
Signed-off-by Bhanuprakash Modem <[email protected]>Signed-off-by Manasi Navare <[email protected]>Cc Jani Nikula <[email protected]>Cc Ville Syrjälä <[email protected]>Tested-by Manasi Navare <[email protected]>
Quoted 4 lines
So if I'm understanding things correctly AMD butchered the VRR stuff and only exposes it when:
-
VRR_ENABLEDis set
Not really surprising? :)
Quoted 2 lines
- _and_ you're using the legacy
page_flippath, atomic flip doesn't support it
Simon Ser has VRR working with sway using the atomic KMS API.
Quoted 1 line
- _and_ the
PAGE_FLIP_ASYNCflag is set.
AFAIK it works both without and with PAGE_FLIP_ASYNC. (Async just means tearing if the flip is programmed outside of vertical blank)
Signature · 6 lines
Earthling Michel Dänzer | https://redhat.com Libre software enthusiast | Mesa and X developer _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH v4 3/3] drm/i915/dp: Expose connector VRR info via debugfs
Quoted 39 lines · Michel Dänzer
Quoted 27 lines · Daniel Vetter
Quoted 20 lines · Manasi Navare
From: Bhanuprakash Modem <[email protected]>
[Why]
It's useful to know the min and max vrr range for IGT testing.[How]
Expose the min and max vfreq for the connector via a debugfs file on the connector, "i915_vrr_info".Example usage: cat
/sys/kernel/debug/dri/0/DP-1/i915_vrr_infov3:
* Remove the unnecessary debug print (Manasi) v2:
* Fix the typo inmax_vfreq(Manasi)
* Change the name of node toi915_vrr_infoso we can add other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)Quoted 5 lines
Signed-off-by Bhanuprakash Modem <[email protected]>Signed-off-by Manasi Navare <[email protected]>Cc Jani Nikula <[email protected]>Cc Ville Syrjälä <[email protected]>Tested-by Manasi Navare <[email protected]>Quoted 4 lines
So if I'm understanding things correctly AMD butchered the VRR stuff and only exposes it when:
-
VRR_ENABLEDis setNot really surprising? :)
Quoted 2 lines
- _and_ you're using the legacy
page_flippath, atomic flip doesn't support it
Quoted 6 lines
Simon Ser has VRR working with sway using the atomic KMS API.
Quoted 1 line
- _and_ the
PAGE_FLIP_ASYNCflag is set.AFAIK it works both without and with
PAGE_FLIP_ASYNC. (Async just means tearing if the flip is programmed outside of vertical blank)
Yeah Nicolas already explained it all on the igt thread, conclusion is that the igt needs some work to improve it (need to test the atomic path too, and try to be a bit less hackish with the timing tests). So all good, just me who panicked and got led astray by the comment in the igt and that amdgpu still implements its own page_flip callback (in completely separate paths, it doesn't seem to converge even in the low-level chip functions), so wasn't obvious to me from reading code that the atomic path would also work.
-Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/75899/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
e720179743cc drm/dp: DRM DP helper for reading Ignore MSA from DPCD
2cbf52b03156 drm/i915/dp: Attach and set drm connector VRR property
8f0b035d39de drm/i915/dp: Expose connector VRR info via debugfs
-:69: WARNING:SYMBOLIC_PERMS: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'.
#69: FILE: drivers/gpu/drm/i915/display/intel_display_debugfs.c:2153:
+ debugfs_create_file("i915_vrr_info", S_IRUGO,total: 0 errors, 1 warnings, 0 checks, 36 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.DOCS: warning for series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/75899/
State : warning
== Summary ==
$ make htmldocs 2>&1 > /dev/null | grep i915 /home/cidrm/kernel/Documentation/gpu/i915.rst:610: WARNING: duplicate label gpu/i915:layout, other instance in /home/cidrm/kernel/Documentation/gpu/i915.rst
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/75899/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_8298 -> Patchwork_17293
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/index.html
Changes
-------
No changes found
Participating hosts (48 -> 44)
------------------------------
Missing (4): fi-byt-clapper fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_8298 -> Patchwork_17293
CI-20190529: 20190529
CI_DRM_8298: 17f82f0c2857d0b442adbdb62eb44b61d0f5b775 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5589: 31962324ac86f029e2841e56e97c42cf9d572956 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17293: 8f0b035d39defe9940ae35c3ec07a73afdcb69ad @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
8f0b035d39de drm/i915/dp: Expose connector VRR info via debugfs 2cbf52b03156 drm/i915/dp: Attach and set drm connector VRR property e720179743cc drm/dp: DRM DP helper for reading Ignore MSA from DPCD
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
In reply to Manasi Navare== Series Details ==
== Series Details ==
Series: series starting with [v4,1/3] drm/dp: DRM DP helper for reading Ignore MSA from DPCD
URL : https://patchwork.freedesktop.org/series/75899/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_8298_full -> Patchwork_17293_full
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_17293_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_17293_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_17293_full:
### IGT changes ###
#### Possible regressions ####
* igt@perf_pmu@cpu-hotplug:
- shard-tglb: NOTRUN -> [INCOMPLETE][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-tglb8/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_17293_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-snb: [PASS][2] -> [FAIL][3] ([i915#1066])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-snb2/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-snb6/igt@[email protected]
* igt@i915_pm_rpm@basic-rte:
- shard-glk: [PASS][4] -> [INCOMPLETE][5] ([i915#58] / [k.org#198133])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-glk6/igt@[email protected]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-glk1/igt@[email protected]
* igt@kms_flip@plain-flip-fb-recreate-interruptible:
- shard-skl: [PASS][6] -> [FAIL][7] ([i915#34])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl10/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl7/igt@[email protected]
* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-shrfb-draw-blt:
- shard-tglb: [PASS][8] -> [SKIP][9] ([i915#668]) +7 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-tglb2/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-tglb6/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- shard-apl: [PASS][10] -> [DMESG-WARN][11] ([i915#180])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-apl4/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-apl2/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-kbl: [PASS][12] -> [DMESG-WARN][13] ([i915#180] / [i915#93] / [i915#95])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-kbl3/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-kbl4/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: [PASS][14] -> [FAIL][15] ([fdo#108145] / [i915#265]) +1 similar issue
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl3/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl2/igt@[email protected]
* igt@kms_psr@psr2_primary_page_flip:
- shard-iclb: [PASS][16] -> [SKIP][17] ([fdo#109441])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-iclb2/igt@kms_psr@psr2_primary_page_flip.html
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-iclb1/igt@kms_psr@psr2_primary_page_flip.html
* igt@kms_setmode@basic:
- shard-skl: [PASS][18] -> [FAIL][19] ([i915#31])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl7/igt@[email protected]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl6/igt@[email protected]
* igt@kms_vblank@pipe-a-ts-continuation-suspend:
- shard-kbl: [PASS][20] -> [DMESG-WARN][21] ([i915#180]) +4 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-kbl7/igt@[email protected]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-kbl6/igt@[email protected]
#### Possible fixes ####
* {igt@gem_wait@write-wait@all}:
- shard-skl: [FAIL][22] ([i915#1676]) -> [PASS][23]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl2/igt@gem_wait@[email protected]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl9/igt@gem_wait@[email protected]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
- shard-glk: [FAIL][24] ([i915#72]) -> [PASS][25]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-glk6/igt@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-glk1/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-skl: [FAIL][26] ([i915#79]) -> [PASS][27]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl8/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl10/igt@[email protected]
* igt@kms_hdr@bpc-switch:
- shard-skl: [FAIL][28] ([i915#1188]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl9/igt@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl9/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- shard-kbl: [DMESG-WARN][30] ([i915#180]) -> [PASS][31] +1 similar issue
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-kbl7/igt@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-kbl2/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_onoff:
- shard-iclb: [SKIP][32] ([fdo#109441]) -> [PASS][33] +1 similar issue
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-iclb6/igt@kms_psr@psr2_cursor_plane_onoff.html
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-iclb2/igt@kms_psr@psr2_cursor_plane_onoff.html
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-apl: [DMESG-WARN][34] ([i915#180]) -> [PASS][35] +3 similar issues
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-apl4/igt@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-apl8/igt@[email protected]
* {igt@sysfs_heartbeat_interval@mixed@vcs0}:
- shard-skl: [INCOMPLETE][36] ([i915#198]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-skl7/igt@sysfs_heartbeat_interval@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-skl6/igt@sysfs_heartbeat_interval@[email protected]
#### Warnings ####
* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: [WARN][38] ([i915#1515]) -> [FAIL][39] ([i915#1515])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-iclb6/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-iclb2/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-basic:
- shard-apl: [FAIL][40] ([fdo#108145] / [i915#265]) -> [FAIL][41] ([fdo#108145] / [i915#265] / [i915#95])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-apl1/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-apl8/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
- shard-kbl: [FAIL][42] ([fdo#108145] / [i915#265] / [i915#93] / [i915#95]) -> [FAIL][43] ([fdo#108145] / [i915#265])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-kbl2/igt@[email protected]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-kbl2/igt@[email protected]
- shard-apl: [FAIL][44] ([fdo#108145] / [i915#265] / [i915#95]) -> [FAIL][45] ([fdo#108145] / [i915#265])
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8298/shard-apl4/igt@[email protected]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/shard-apl2/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[i915#1066]: https://gitlab.freedesktop.org/drm/intel/issues/1066
[i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
[i915#1459]: https://gitlab.freedesktop.org/drm/intel/issues/1459
[i915#1515]: https://gitlab.freedesktop.org/drm/intel/issues/1515
[i915#1542]: https://gitlab.freedesktop.org/drm/intel/issues/1542
[i915#1676]: https://gitlab.freedesktop.org/drm/intel/issues/1676
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
[i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
[i915#31]: https://gitlab.freedesktop.org/drm/intel/issues/31
[i915#34]: https://gitlab.freedesktop.org/drm/intel/issues/34
[i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
[i915#668]: https://gitlab.freedesktop.org/drm/intel/issues/668
[i915#72]: https://gitlab.freedesktop.org/drm/intel/issues/72
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#93]: https://gitlab.freedesktop.org/drm/intel/issues/93
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_8298 -> Patchwork_17293
CI-20190529: 20190529
CI_DRM_8298: 17f82f0c2857d0b442adbdb62eb44b61d0f5b775 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5589: 31962324ac86f029e2841e56e97c42cf9d572956 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_17293: 8f0b035d39defe9940ae35c3ec07a73afdcb69ad @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_17293/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx