Skip to contentSkip to conversation

iommu/amd: Fix the configuration of GCR3 table root pointer

PATCH New Sasha Levin 1 participant 19 messages Apr 18, 2020

Subsystems (7)
Stable branch VFS SCSI s390 +3 more subsystems
lore
Share & tools
lore
author maintainer
#2 lore raw

PATCH 3/19 ceph: return ceph_mdsc_do_request() errors from __get_parent()

In reply to Sasha Levin

From: Qiujun Huang <[email protected]>

[ Upstream commit c6d50296032f0b97473eb2e274dc7cc5d0173847 ]

Return the error returned by ceph_mdsc_do_request(). Otherwise, r_target_inode ends up being NULL this ends up returning ENOENT regardless of the error.

---
 fs/ceph/export.c | 5 +++++
 1 file changed, 5 insertions(+)
fs/ceph/export.c +5 -0
index fe02ae7f056a3..ff9e60daf086b 100644
@@ -146,6 +146,11 @@ static struct dentry *__get_parent(struct super_block *sb,
 	}
 	req->r_num_caps = 1;
 	err = ceph_mdsc_do_request(mdsc, NULL, req);
+	if (err) {
+		ceph_mdsc_put_request(req);
+		return ERR_PTR(err);
+	}
+
 	inode = req->r_target_inode;
 	if (inode)
 		ihold(inode);
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/19 pwm: rcar: Fix late Runtime PM enablement

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 1451a3eed24b5fd6a604683f0b6995e0e7e16c79 ]

Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should be disabled after the removal of the PWM chip.

Fixes ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer")
---
 drivers/pwm/pwm-rcar.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/pwm/pwm-rcar.c +7 -3
index 6e99a63ffa290..df0723df1f997 100644
@@ -232,24 +232,28 @@ static int rcar_pwm_probe(struct platform_device *pdev)
 	rcar_pwm->chip.base = -1;
 	rcar_pwm->chip.npwm = 1;
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = pwmchip_add(&rcar_pwm->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+		pm_runtime_disable(&pdev->dev);
 		return ret;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 }
 
 static int rcar_pwm_remove(struct platform_device *pdev)
 {
 	struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwmchip_remove(&rcar_pwm->chip);
 
 	pm_runtime_disable(&pdev->dev);
 
-	return pwmchip_remove(&rcar_pwm->chip);
+	return ret;
 }
 
 static const struct of_device_id rcar_pwm_of_table[] = {
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/19 pwm: renesas-tpu: Fix late Runtime PM enablement

In reply to Sasha Levin

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit d5a3c7a4536e1329a758e14340efd0e65252bd3d ]

Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should always be disabled after the removal of the PWM chip, even if the latter failed.

Fixes 99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver")
---
 drivers/pwm/pwm-renesas-tpu.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/pwm/pwm-renesas-tpu.c +4 -5
index 075c1a764ba29..6247a956cc089 100644
@@ -423,16 +423,17 @@ static int tpu_probe(struct platform_device *pdev)
 	tpu->chip.base = -1;
 	tpu->chip.npwm = TPU_CHANNEL_MAX;
 
+	pm_runtime_enable(&pdev->dev);
+
 	ret = pwmchip_add(&tpu->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register PWM chip\n");
+		pm_runtime_disable(&pdev->dev);
 		return ret;
 	}
 
 	dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 }
 
@@ -442,12 +443,10 @@ static int tpu_remove(struct platform_device *pdev)
 	int ret;
 
 	ret = pwmchip_remove(&tpu->chip);
-	if (ret)
-		return ret;
 
 	pm_runtime_disable(&pdev->dev);
 
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_OF
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/19 pwm: bcm2835: Dynamically allocate base

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit 2c25b07e5ec119cab609e41407a1fb3fa61442f5 ]

The newer 2711 and 7211 chips have two PWM controllers and failure to dynamically allocate the PWM base would prevent the second PWM controller instance being probed for succeeding with an -EEXIST error from alloc_pwms().

---
 drivers/pwm/pwm-bcm2835.c | 1 +
 1 file changed, 1 insertion(+)
drivers/pwm/pwm-bcm2835.c +1 -0
index b4c7f956b6fa6..388a9fa5c1d24 100644
@@ -160,6 +160,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
+	pc->chip.base = -1;
 	pc->chip.npwm = 2;
 
 	platform_set_drvdata(pdev, pc);
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 15/19 ocfs2: no need try to truncate file beyond i_size

In reply to Sasha Levin

From: Changwei Ge <[email protected]>

[ Upstream commit 783fda856e1034dee90a873f7654c418212d12d7 ]

Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode size. This restriction is not necessary and violates fallocate(2) semantics.

If fallocate(2) offset is beyond inode size, just return success and do nothing further.

Otherwise, ocfs2 will crash the kernel.

kernel BUG at fs/ocfs2//alloc.c:7264!

   ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
   ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
   __ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
   ocfs2_fallocate+0x83/0xa0 [ocfs2]
   vfs_fallocate+0x148/0x230
   SyS_fallocate+0x48/0x80
   do_syscall_64+0x79/0x170
Cc Mark Fasheh <[email protected]>
Cc Joel Becker <[email protected]>
Cc Junxiao Bi <[email protected]>
Cc Changwei Ge <[email protected]>
Cc Gang He <[email protected]>
Cc Jun Piao <[email protected]>
Link https://urldefense.com/v3/__http://lkml.kernel.org/r/20200407082754.17565-1-chge at linux.alibaba.com__;!!GqivPVa7Brio!LER8gKiXhLaZFaQV4vxd0ZGHVqgsrF1YtpNMky35L8_gdIKp4yGabRxwGS3bb096w77jjg$
---
 fs/ocfs2/alloc.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/ocfs2/alloc.c +4 -0
index 93e6f029a3225..7e34be37c96d2 100644
@@ -7206,6 +7206,10 @@ int ocfs2_truncate_inline(struct inode *inode, struct buffer_head *di_bh,
 	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 	struct ocfs2_inline_data *idata = &di->id2.i_data;
 
+	/* No need to punch hole beyond i_size. */
+	if (start >= i_size_read(inode))
+		return 0;
+
 	if (end > i_size_read(inode))
 		end = i_size_read(inode);
 
Signature · 1 line
2.20.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/19 iommu/amd: Fix the configuration of GCR3 table root pointer

From: Adrian Huang <[email protected]>

[ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ]

The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'.

Fixes 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode")
---
 drivers/iommu/amd_iommu_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/amd_iommu_types.h +1 -1
index b08cf57bf4554..695d4e235438c 100644
@@ -303,7 +303,7 @@
 
 #define DTE_GCR3_VAL_A(x)	(((x) >> 12) & 0x00007ULL)
 #define DTE_GCR3_VAL_B(x)	(((x) >> 15) & 0x0ffffULL)
-#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0xfffffULL)
+#define DTE_GCR3_VAL_C(x)	(((x) >> 31) & 0x1fffffULL)
 
 #define DTE_GCR3_INDEX_A	0
 #define DTE_GCR3_INDEX_B	1
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#3 lore raw

PATCH 4/19 ceph: don't skip updating wanted caps when cap is stale

From: "Yan, Zheng" <[email protected]>

[ Upstream commit 0aa971b6fd3f92afef6afe24ef78d9bb14471519 ]

1. try_get_cap_refs() fails to get caps and finds that mds_wanted does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's stale) already includes caps wanted by open file, so it skips updating wanted caps.

Above events can cause an infinite loop inside ceph_get_caps().

---
 fs/ceph/caps.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/ceph/caps.c +6 -2
index aa4df4a022525..efdf81ea3b5f8 100644
@@ -1734,8 +1734,12 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 		}
 
 		/* want more caps from mds? */
-		if (want & ~(cap->mds_wanted | cap->issued))
-			goto ack;
+		if (want & ~cap->mds_wanted) {
+			if (want & ~(cap->mds_wanted | cap->issued))
+				goto ack;
+			if (!__cap_is_valid(cap))
+				goto ack;
+		}
 
 		/* things we might delay */
 		if ((cap->issued & ~retain) == 0 &&
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/19 ASoC: dpcm: allow start or stop during pause for backend

In reply to Sasha Levin

From: 이경택 <[email protected]>

[ Upstream commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 ]

soc_compr_trigger_fe() allows start or stop after pause_push. In dpcm_be_dai_trigger(), however, only pause_release is allowed command after pause_push.
So, start or stop after pause in compress offload is always returned as error if the compress offload is used with dpcm. To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed for start or stop command.

---
 sound/soc/soc-pcm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
sound/soc/soc-pcm.c +4 -2
index 7cffa98ec313c..d4bf3dc6b0158 100644
@@ -1951,7 +1951,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
 		switch (cmd) {
 		case SNDRV_PCM_TRIGGER_START:
 			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_PREPARE) &&
-			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP))
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_STOP) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			ret = dpcm_do_trigger(dpcm, be_substream, cmd);
@@ -1981,7 +1982,8 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream,
 			be->dpcm[stream].state = SND_SOC_DPCM_STATE_START;
 			break;
 		case SNDRV_PCM_TRIGGER_STOP:
-			if (be->dpcm[stream].state != SND_SOC_DPCM_STATE_START)
+			if ((be->dpcm[stream].state != SND_SOC_DPCM_STATE_START) &&
+			    (be->dpcm[stream].state != SND_SOC_DPCM_STATE_PAUSED))
 				continue;
 
 			if (!snd_soc_dpcm_can_be_free_stop(fe, be, stream))
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/19 scsi: iscsi: Report unbind session event when the target has been removed

In reply to Sasha Levin

From: Wu Bo <[email protected]>

[ Upstream commit 13e60d3ba287d96eeaf1deaadba51f71578119a3 ]

If the daemon is restarted or crashes while logging out of a session, the unbind session event sent by the kernel is not processed and is lost. When the daemon starts again, the session can't be unbound because the daemon is waiting for the event message. However, the kernel has already logged out and the event will not be resent.

When iscsid restart is complete, logout session reports error:

Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260]
iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260].
iscsiadm: initiator reported error (9 - internal error)
iscsiadm: Could not logout of all requested sessions

Make sure the unbind event is emitted.

[mkp: commit desc and applied by hand since patch was mangled]

---
 drivers/scsi/scsi_transport_iscsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/scsi_transport_iscsi.c +3 -1
index 20cf01d6ded7e..de10b461ec7ef 100644
@@ -2014,7 +2014,7 @@ static void __iscsi_unbind_session(struct work_struct *work)
 	if (session->target_id == ISCSI_MAX_TARGET) {
 		spin_unlock_irqrestore(&session->lock, flags);
 		mutex_unlock(&ihost->mutex);
-		return;
+		goto unbind_session_exit;
 	}
 
 	target_id = session->target_id;
@@ -2026,6 +2026,8 @@ static void __iscsi_unbind_session(struct work_struct *work)
 		ida_simple_remove(&iscsi_sess_ida, target_id);
 
 	scsi_remove_target(&session->dev);
+
+unbind_session_exit:
 	iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION);
 	ISCSI_DBG_TRANS_SESSION(session, "Completed target removal\n");
 }
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/19 s390/cio: avoid duplicated 'ADD' uevents

In reply to Sasha Levin

From: Cornelia Huck <[email protected]>

[ Upstream commit 05ce3e53f375295c2940390b2b429e506e07655c ]

The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The io_subchannel driver will do so when the associated ccw_device has been registered -- but unconditionally, so more ADD uevents will be generated if a subchannel has been unbound from the io_subchannel driver and later rebound.

To fix this, only generate the ADD event if uevents were still suppressed for the device.

Fixes fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels")

Message-Id: <[email protected]>

---
 drivers/s390/cio/device.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/s390/cio/device.c +9 -4
index 6aae684128021..2389a1dc6d300 100644
@@ -872,8 +872,10 @@ static void io_subchannel_register(struct ccw_device *cdev)
 	 * Now we know this subchannel will stay, we can throw
 	 * our delayed uevent.
 	 */
-	dev_set_uevent_suppress(&sch->dev, 0);
-	kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+	if (dev_get_uevent_suppress(&sch->dev)) {
+		dev_set_uevent_suppress(&sch->dev, 0);
+		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+	}
 	/* make it known to the system */
 	ret = ccw_device_add(cdev);
 	if (ret) {
@@ -1082,8 +1084,11 @@ static int io_subchannel_probe(struct subchannel *sch)
 		 * Throw the delayed uevent for the subchannel, register
 		 * the ccw_device and exit.
 		 */
-		dev_set_uevent_suppress(&sch->dev, 0);
-		kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+		if (dev_get_uevent_suppress(&sch->dev)) {
+			/* should always be the case for the console */
+			dev_set_uevent_suppress(&sch->dev, 0);
+			kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+		}
 		cdev = sch_get_cdev(sch);
 		rc = ccw_device_add(cdev);
 		if (rc) {
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/19 ipc/util.c: sysvipc_find_ipc() should increase position index

In reply to Sasha Levin

From: Vasily Averin <[email protected]>

[ Upstream commit 89163f93c6f969da5811af5377cc10173583123b ]

If seq_file .next function does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 ipc/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
ipc/util.c +1 -1
index 0f401d94b7c65..2724f9071ab39 100644
@@ -756,13 +756,13 @@ static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 			total++;
 	}
 
+	*new_pos = pos + 1;
 	if (total >= ids->in_use)
 		return NULL;
 
 	for (; pos < IPCMNI; pos++) {
 		ipc = idr_find(&ids->ipcs_idr, pos);
 		if (ipc != NULL) {
-			*new_pos = pos + 1;
 			rcu_read_lock();
 			ipc_lock_object(ipc);
 			return ipc;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 14/19 iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr()

In reply to Sasha Levin

From: Qian Cai <[email protected]>

[ Upstream commit c6f4ebdeba4cff590594df931ff1ee610c426431 ]

dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read side critical section but with dmar_global_lock held. Silence this false positive.

drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1:
#0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19

 Call Trace:
  dump_stack+0xa4/0xfe
  lockdep_rcu_suspicious+0xeb/0xf5
  dmar_find_atsr+0x1ab/0x1c0
  dmar_parse_one_atsr+0x64/0x220
  dmar_walk_remapping_entries+0x130/0x380
  dmar_table_init+0x166/0x243
  intel_iommu_init+0x1ab/0xe19
  pci_iommu_init+0x1a/0x44
  do_one_initcall+0xae/0x4d0
  kernel_init_freeable+0x412/0x4c5
  kernel_init+0x19/0x193
---
 drivers/iommu/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +2 -1
index ed6cb3abf645c..73ac0888d3995 100644
@@ -4164,7 +4164,8 @@ static struct dmar_atsr_unit *dmar_find_atsr(struct acpi_dmar_atsr *atsr)
 	struct dmar_atsr_unit *atsru;
 	struct acpi_dmar_atsr *tmp;
 
-	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list) {
+	list_for_each_entry_rcu(atsru, &dmar_atsr_units, list,
+				dmar_rcu_check()) {
 		tmp = (struct acpi_dmar_atsr *)atsru->hdr;
 		if (atsr->segment != tmp->segment)
 			continue;
Signature · 6 lines
2.20.1

_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
author maintainer
#15 lore raw

PATCH 16/19 hfsplus: fix crash and filesystem corruption when deleting files

In reply to Sasha Levin

From: Simon Gander <[email protected]>

[ Upstream commit 25efb2ffdf991177e740b2f63e92b4ec7d310a92 ]

When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes.

To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix.

To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree.

---
 fs/hfsplus/attributes.c | 4 ++++
 1 file changed, 4 insertions(+)
fs/hfsplus/attributes.c +4 -0
index d7455ea702878..0c4548d8cd0ba 100644
@@ -291,6 +291,10 @@ static int __hfsplus_delete_attr(struct inode *inode, u32 cnid,
 		return -ENOENT;
 	}
 
+	/* Avoid btree corruption */
+	hfs_bnode_read(fd->bnode, fd->search_key,
+			fd->keyoffset, fd->keylength);
+
 	err = hfs_brec_remove(fd);
 	if (err)
 		return err;
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 18/19 ALSA: ice1724: Fix invalid access for enumerated ctl items

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit c47914c00be346bc5b48c48de7b0da5c2d1a296c ]

The access to Analog Capture Source control value implemented in prodigy_hifi.c is wrong, as caught by the recently introduced sanity check; it should be accessing value.enumerated.item[] instead of value.integer.value[]. This patch corrects the wrong access pattern.

Fixes 6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
---
 sound/pci/ice1712/prodigy_hifi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
sound/pci/ice1712/prodigy_hifi.c +2 -2
index 2697402b51957..41f6450a2539f 100644
@@ -569,7 +569,7 @@ static int wm_adc_mux_enum_get(struct snd_kcontrol *kcontrol,
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 
 	mutex_lock(&ice->gpio_mutex);
-	ucontrol->value.integer.value[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
+	ucontrol->value.enumerated.item[0] = wm_get(ice, WM_ADC_MUX) & 0x1f;
 	mutex_unlock(&ice->gpio_mutex);
 	return 0;
 }
@@ -583,7 +583,7 @@ static int wm_adc_mux_enum_put(struct snd_kcontrol *kcontrol,
 
 	mutex_lock(&ice->gpio_mutex);
 	oval = wm_get(ice, WM_ADC_MUX);
-	nval = (oval & 0xe0) | ucontrol->value.integer.value[0];
+	nval = (oval & 0xe0) | ucontrol->value.enumerated.item[0];
 	if (nval != oval) {
 		wm_put(ice, WM_ADC_MUX, nval);
 		change = 1;
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 19/19 ALSA: hda: Fix potential access overflow in beep helper

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a ]

The beep control helper function blindly stores the values in two stereo channels no matter whether the actual control is mono or stereo. This is practically harmless, but it annoys the recently introduced sanity check, resulting in an error when the checker is enabled.

This patch corrects the behavior to store only on the defined array member.

---
 sound/pci/hda/hda_beep.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
sound/pci/hda/hda_beep.c +5 -1
index c397e7da0eacf..7ccfb09535e14 100644
@@ -310,8 +310,12 @@ int snd_hda_mixer_amp_switch_get_beep(struct snd_kcontrol *kcontrol,
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct hda_beep *beep = codec->beep;
+	int chs = get_amp_channels(kcontrol);
+
 	if (beep && (!beep->enabled || !ctl_has_mute(kcontrol))) {
-		ucontrol->value.integer.value[0] =
+		if (chs & 1)
+			ucontrol->value.integer.value[0] = beep->enabled;
+		if (chs & 2)
 			ucontrol->value.integer.value[1] = beep->enabled;
 		return 0;
 	}
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 17/19 libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

In reply to Sasha Levin

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af ]

During system resume from suspend, this can be observed on ASM1062 PMP controller:

ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133

Kernel panic - not syncing: stack-protector: Kernel
 in: sata_pmp_eh_recover+0xa2b/0xa40

CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
 1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40

Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector.

Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly.

---
 drivers/ata/libata-pmp.c | 1 +
 1 file changed, 1 insertion(+)
drivers/ata/libata-pmp.c +1 -0
index 85aa76116a305..7924d0635718d 100644
@@ -764,6 +764,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 
 	if (dev->flags & ATA_DFLAG_DETACH) {
 		detach = 1;
+		rc = -ENODEV;
 		goto fail;
 	}
 
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/19 kernel/gcov/fs.c: gcov_seq_next() should increase position index

In reply to Sasha Levin

From: Vasily Averin <[email protected]>

[ Upstream commit f4d74ef6220c1eda0875da30457bef5c7111ab06 ]

If seq_file .next function does not change position index, read after some lseek can generate unexpected output.

https://bugzilla.kernel.org/show_bug.cgi?id=206283

---
 kernel/gcov/fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
kernel/gcov/fs.c +1 -1
index edf67c493a8e1..e473f6a1f6ca7 100644
@@ -108,9 +108,9 @@ static void *gcov_seq_next(struct seq_file *seq, void *data, loff_t *pos)
 {
 	struct gcov_iterator *iter = data;
 
+	(*pos)++;
 	if (gcov_iter_next(iter))
 		return NULL;
-	(*pos)++;
 
 	return iter;
 }
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/19 ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()

In reply to Sasha Levin

From: Hans de Goede <[email protected]>

[ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ]

sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held.

So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path.

---
 sound/soc/intel/atom/sst-atom-controls.c | 2 ++
 1 file changed, 2 insertions(+)
sound/soc/intel/atom/sst-atom-controls.c +2 -0
index d55388e082e18..43c960bb4b211 100644
@@ -963,7 +963,9 @@ static int sst_set_be_modules(struct snd_soc_dapm_widget *w,
 	dev_dbg(c->dev, "Enter: widget=%s\n", w->name);
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		mutex_lock(&drv->lock);
 		ret = sst_send_slot_map(drv);
+		mutex_unlock(&drv->lock);
 		if (ret)
 			return ret;
 		ret = sst_send_pipe_module_params(w, k);
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/19 scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login

In reply to Sasha Levin

From: James Smart <[email protected]>

[ Upstream commit 38503943c89f0bafd9e3742f63f872301d44cbea ]

The following kasan bug was called out:

 BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc]
 Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676
 ...
 Call Trace:
 dump_stack+0x96/0xe0
 ? lpfc_unreg_login+0x7c/0xc0 [lpfc]
 print_address_description.constprop.6+0x1b/0x220
 ? lpfc_unreg_login+0x7c/0xc0 [lpfc]
 ? lpfc_unreg_login+0x7c/0xc0 [lpfc]
 __kasan_report.cold.9+0x37/0x7c
 ? lpfc_unreg_login+0x7c/0xc0 [lpfc]
 kasan_report+0xe/0x20
 lpfc_unreg_login+0x7c/0xc0 [lpfc]
 lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc]
 ...

When processing the completion of a "Reg Rpi" login mailbox command in lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is extracted from the completing mailbox context and passed as an input for the next. However, the vpi stored in the mailbox command context is an absolute vpi, which for SLI4 represents both base + offset. When used with a non-zero base component, (function id > 0) this results in an out-of-range access beyond the allocated phba->vpi_ids array.

Fix by subtracting the function's base value to get an accurate vpi number.

---
 drivers/scsi/lpfc/lpfc_sli.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/lpfc/lpfc_sli.c +2 -0
index 065fdc17bbfbb..7a94c2d352390 100644
@@ -2186,6 +2186,8 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	    !pmb->u.mb.mbxStatus) {
 		rpi = pmb->u.mb.un.varWords[0];
 		vpi = pmb->u.mb.un.varRegLogin.vpi;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			vpi -= phba->sli4_hba.max_cfg_param.vpi_base;
 		lpfc_unreg_login(phba, vpi, rpi, pmb);
 		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
Signature · 1 line
2.20.1