Skip to contentSkip to conversation

net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array

PATCH Applied Marc Zyngier 4 participants 4 messages Apr 18, 2020 – Apr 29, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array

Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device:

==================================================================

BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G            E     5.7.0-rc1-00101-g8624b7577b9c #781
Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020
Call trace:
 dump_backtrace+0x0/0x2a0
 show_stack+0x20/0x30
 dump_stack+0xec/0x148
 print_address_description.isra.12+0x70/0x35c
 __kasan_report+0xfc/0x1d4
 kasan_report+0x4c/0x68
 __asan_load4+0x9c/0xd8
 _get_maxdiv+0x74/0xd8
 clk_divider_bestdiv+0x74/0x5e0
 clk_divider_round_rate+0x80/0x1a8
 clk_core_determine_round_nolock.part.9+0x9c/0xd0
 clk_core_round_rate_nolock+0xf0/0x108
 clk_hw_round_rate+0xac/0xf0
 clk_factor_round_rate+0xb8/0xd0
 clk_core_determine_round_nolock.part.9+0x9c/0xd0
 clk_core_round_rate_nolock+0xf0/0x108
 clk_core_round_rate_nolock+0xbc/0x108
 clk_core_set_rate_nolock+0xc4/0x2e8
 clk_set_rate+0x58/0xe0
 meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b]
 platform_drv_probe+0x78/0xd8
 really_probe+0x158/0x610
 driver_probe_device+0x140/0x1b0
 device_driver_attach+0xa4/0xb0
 __driver_attach+0xcc/0x1c8
 bus_for_each_dev+0xf4/0x168
 driver_attach+0x3c/0x50
 bus_add_driver+0x238/0x2e8
 driver_register+0xc8/0x1e8
 __platform_driver_register+0x88/0x98
 meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b]
 do_one_initcall+0xa8/0x328
 do_init_module+0xe8/0x368
 load_module+0x3300/0x36b0
 __do_sys_finit_module+0x120/0x1a8
 __arm64_sys_finit_module+0x4c/0x60
 el0_svc_common.constprop.2+0xe4/0x268
 do_el0_svc+0x98/0xa8
 el0_svc+0x24/0x68
 el0_sync_handler+0x12c/0x318
 el0_sync+0x158/0x180

The buggy address belongs to the variable:
 div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b]

Memory state around the buggy address:
 ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00
 ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa
>ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa
                                                             ^
 ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa
 ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa
==================================================================

Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well.

Let's add the empty structure that indicates the end of the array.

Fixes bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
Cc Martin Blumenstingl <[email protected]>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +1 -0
index 0e2fa14f14237..a3934ca6a043b 100644
@@ -119,6 +119,7 @@ static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
 		{ .div = 5, .val = 5, },
 		{ .div = 6, .val = 6, },
 		{ .div = 7, .val = 7, },
+		{ /* end of array */ }
 	};
 
 	clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
Signature · 1 line
2.26.1
reviewer Reviewed-by on v1 1/1
#1 lore raw

Hi Marc,

On Sat, Apr 18, 2020 at 8:15 PM Marc Zyngier <[email protected]> wrote:
[...]

Quoted 5 lines

Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well.

Let's add the empty structure that indicates the end of the array.

oh. Thank you for fixing this!

Quoted 2 lines
Fixes bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
maintainer
#2 lore raw
In reply to Marc Zyngier

From: Marc Zyngier <[email protected]>
Date: Sat, 18 Apr 2020 19:14:57 +0100

Quoted 8 lines

Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device:

==================================================================

BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G            E     5.7.0-rc1-00101-g8624b7577b9c #781
Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020

...

Quoted 10 lines

Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well.

Let's add the empty structure that indicates the end of the array.

Fixes bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs")
Cc Martin Blumenstingl <[email protected]>

Please do not CC: [email protected] for networking changes as per netdev-FAQ

Applied and queued up for -stable, thanks.

#3 lore raw
In reply to Marc Zyngier
This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).

Hello:

This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).

Quoted 51 lines · On Sat, 18 Apr 2020 19:14:57 +0100 you wrote:

Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device:

==================================================================

BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8
Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139
CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G            E     5.7.0-rc1-00101-g8624b7577b9c #781
Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020
Call trace:
 dump_backtrace+0x0/0x2a0
 show_stack+0x20/0x30
 dump_stack+0xec/0x148
 print_address_description.isra.12+0x70/0x35c
 __kasan_report+0xfc/0x1d4
 kasan_report+0x4c/0x68
 __asan_load4+0x9c/0xd8
 _get_maxdiv+0x74/0xd8
 clk_divider_bestdiv+0x74/0x5e0
 clk_divider_round_rate+0x80/0x1a8
 clk_core_determine_round_nolock.part.9+0x9c/0xd0
 clk_core_round_rate_nolock+0xf0/0x108
 clk_hw_round_rate+0xac/0xf0
 clk_factor_round_rate+0xb8/0xd0
 clk_core_determine_round_nolock.part.9+0x9c/0xd0
 clk_core_round_rate_nolock+0xf0/0x108
 clk_core_round_rate_nolock+0xbc/0x108
 clk_core_set_rate_nolock+0xc4/0x2e8
 clk_set_rate+0x58/0xe0
 meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b]
 platform_drv_probe+0x78/0xd8
 really_probe+0x158/0x610
 driver_probe_device+0x140/0x1b0
 device_driver_attach+0xa4/0xb0
 __driver_attach+0xcc/0x1c8
 bus_for_each_dev+0xf4/0x168
 driver_attach+0x3c/0x50
 bus_add_driver+0x238/0x2e8
 driver_register+0xc8/0x1e8
 __platform_driver_register+0x88/0x98
 meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b]
 do_one_initcall+0xa8/0x328
 do_init_module+0xe8/0x368
 load_module+0x3300/0x36b0
 __do_sys_finit_module+0x120/0x1a8
 __arm64_sys_finit_module+0x4c/0x60
 el0_svc_common.constprop.2+0xe4/0x268
 do_el0_svc+0x98/0xa8
 el0_svc+0x24/0x68
 el0_sync_handler+0x12c/0x318
 el0_sync+0x158/0x180
Quoted 1 line

[...]

Here is a summary with links:
- net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array

    https://git.kernel.org/khilman/linux-amlogic/c/f0212a5ebfa6cd789ab47666b9cc169e6e688732

You are awesome, thank you!

Signature · 7 lines
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic