Skip to contentSkip to conversation

Add Enhanced Connection Established (ECE) APIs

PATCH New Leon Romanovsky 1 participant 13 messages Apr 20, 2020 InfiniBand

lore
Share & tools
lore
#0 lore raw

cover Add Enhanced Connection Established (ECE) APIs

From: Leon Romanovsky <[email protected]>

Hi,

Enhanced Connection Established or ECE is new negotiation scheme introduced in IBTA v1.4 to exchange extra information about nodes capabilities and later negotiate them at the connection establishment phase.

The RDMA-CM messages (REQ, REP, SIDR_REQ and SIDR_REP) were extended to carry two fields, one new and another gained new functionality:
* VendorID is a new field that indicates that common subset of vendor option bits are supported as indicated by that VendorID.
* AttributeModifier already exists, but overloaded to indicate which vendor options are supported by this VendorID.

The general (success) communication flow can be described by the following table:

------------------------------------------------------------------------------
Requester (client) | Responder (server)
-----------------------------------------------------------------------------

1. Create data QP.                        |
2. Get ECE information about this QP.     |
3. Update REQ message with local ECE data.|
4. Send REQ message with rdma_connect().  |
                                          | 5. Get REQ message with rdma_get_events.
                                          | 6. Read remote ECE data from the REQ message.
                                          | 7. Create data QP.
                                          | 8. Set in QP the desired ECE options by giving remote ECE data.
                                          | 9. Read accepted local ECE options.
                                          |10. Modify QP based on those options.
                                          |11. Fill local ECE options in REP message.
                                          |12. Send REP message with rdma_accept().
13. Receive REP message.                  |
14. Read remote ECE data from REP message.|
15. Set in QP remote ECE data             |
16. Modify QP based on remote ECE data    |

------------------------------------------------------------------------------

In case the server decides to reject connection, the items #9-10 will be replaced with rdma_reject_ece() call that will send REJ message together with "ECE options not supported" reason as described in the IBTA.

Thanks

Ido Kalir (2):
pyverbs: Add support for ECE
tests: Add test for rdmacm ECE mechanism

Leon Romanovsky (10):
Update kernel headers
libibverbs: Add interfaces to configure and use ECE
libibverbs: Document ECE API
debian: Install all available librdmacm man pages
librdmacm: Provide interface to use ECE for external QPs
librdmacm: Connect rdma_connect to the ECE
librdmacm: Return ECE results through rdma_accept
librdmacm: Add an option to reject ECE request
librdmacm: Implement ECE handshake logic
librdmacm: Document ECE API

 CMakeLists.txt                             |   2 +-
 debian/libibverbs1.symbols                 |   5 +-
 debian/librdmacm-dev.install               |  53 +--------
 debian/librdmacm1.symbols                  |   4 +
 kernel-headers/rdma/mlx5_user_ioctl_cmds.h |   6 +
 kernel-headers/rdma/rdma_user_cm.h         |  15 ++-
 libibverbs/CMakeLists.txt                  |   2 +-
 libibverbs/driver.h                        |   2 +
 libibverbs/dummy_ops.c                     |  14 +++
 libibverbs/libibverbs.map.in               |   6 +
 libibverbs/man/CMakeLists.txt              |   2 +
 libibverbs/man/ibv_query_ece.3.md          |  56 +++++++++
 libibverbs/man/ibv_set_ece.3.md            |  61 ++++++++++
 libibverbs/verbs.c                         |  15 +++
 libibverbs/verbs.h                         |  18 +++
 librdmacm/CMakeLists.txt                   |   2 +-
 librdmacm/cma.c                            | 130 +++++++++++++++++++--
 librdmacm/librdmacm.map                    |   7 ++
 librdmacm/man/CMakeLists.txt               |   2 +
 librdmacm/man/rdma_cm.7                    |  14 ++-
 librdmacm/man/rdma_get_remote_ece.3.md     |  61 ++++++++++
 librdmacm/man/rdma_set_local_ece.3.md      |  62 ++++++++++
 librdmacm/rdma_cma.h                       |  24 ++++
 librdmacm/rdma_cma_abi.h                   |  15 ++-
 pyverbs/cmid.pyx                           |  23 +++-
 pyverbs/libibverbs.pxd                     |   7 ++
 pyverbs/librdmacm.pxd                      |   2 +
 pyverbs/qp.pxd                             |   3 +
 pyverbs/qp.pyx                             |  45 ++++++-
 tests/rdmacm_utils.py                      |  18 ++-
 30 files changed, 606 insertions(+), 70 deletions(-)
 create mode 100644 libibverbs/man/ibv_query_ece.3.md
 create mode 100644 libibverbs/man/ibv_set_ece.3.md
 create mode 100644 librdmacm/man/rdma_get_remote_ece.3.md
 create mode 100644 librdmacm/man/rdma_set_local_ece.3.md

--
2.25.2

#1 lore raw

PATCH 1/12 Update kernel headers

From: Leon Romanovsky <[email protected]>

To commit ?? ("RDMA/mlx5: Verify that QP is created with RQ or SQ")

---
 kernel-headers/rdma/mlx5_user_ioctl_cmds.h |  6 ++++++
 kernel-headers/rdma/rdma_user_cm.h         | 15 ++++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)
kernel-headers/rdma/mlx5_user_ioctl_cmds.h +6 -0
index 24f3388c..8e316ef8 100644
@@ -241,6 +241,11 @@ enum mlx5_ib_flow_type {
 	MLX5_IB_FLOW_TYPE_MC_DEFAULT,
 };
 
+enum mlx5_ib_create_flow_flags {
+	MLX5_IB_ATTR_CREATE_FLOW_FLAGS_DEFAULT_MISS = 1 << 0,
+	MLX5_IB_ATTR_CREATE_FLOW_FLAGS_DROP = 1 << 1,
+};
+
 enum mlx5_ib_create_flow_attrs {
 	MLX5_IB_ATTR_CREATE_FLOW_HANDLE = (1U << UVERBS_ID_NS_SHIFT),
 	MLX5_IB_ATTR_CREATE_FLOW_MATCH_VALUE,
@@ -251,6 +256,7 @@ enum mlx5_ib_create_flow_attrs {
 	MLX5_IB_ATTR_CREATE_FLOW_TAG,
 	MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX,
 	MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX_OFFSET,
+	MLX5_IB_ATTR_CREATE_FLOW_FLAGS,
 };
 
 enum mlx5_ib_destoy_flow_attrs {
kernel-headers/rdma/rdma_user_cm.h +14 -1
index e42940a2..e545f2de 100644
@@ -78,6 +78,10 @@ enum rdma_ucm_port_space {
 	RDMA_PS_UDP   = 0x0111,
 };
 
+enum rdma_ucm_reject_reason {
+	RDMA_USER_CM_REJ_VENDOR_OPTION_NOT_SUPPORTED = 35
+};
+
 /*
  * command ABI structures.
  */
@@ -206,10 +210,16 @@ struct rdma_ucm_ud_param {
 	__u8  reserved[7];
 };
 
+struct rdma_ucm_ece {
+	__u32 vendor_id;
+	__u32 attr_mod;
+};
+
 struct rdma_ucm_connect {
 	struct rdma_ucm_conn_param conn_param;
 	__u32 id;
 	__u32 reserved;
+	struct rdma_ucm_ece ece;
 };
 
 struct rdma_ucm_listen {
@@ -222,12 +232,14 @@ struct rdma_ucm_accept {
 	struct rdma_ucm_conn_param conn_param;
 	__u32 id;
 	__u32 reserved;
+	struct rdma_ucm_ece ece;
 };
 
 struct rdma_ucm_reject {
 	__u32 id;
 	__u8  private_data_len;
-	__u8  reserved[3];
+	__u8  reason; /* enum rdma_ucm_reject_reason */
+	__u8  reserved[2];
 	__u8  private_data[RDMA_MAX_PRIVATE_DATA];
 };
 
@@ -287,6 +299,7 @@ struct rdma_ucm_event_resp {
 		struct rdma_ucm_ud_param   ud;
 	} param;
 	__u32 reserved;
+	struct rdma_ucm_ece ece;
 };
 
 /* Option levels */

--
2.25.2

#2 lore raw

PATCH 2/12 libibverbs: Add interfaces to configure and use ECE

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

ECE parameters are vendor specific information per-QP, provide a way to set, query and commit ECE data.

* ibv_set_ece() - overwrite default ECE options and instruct libibverbs to use ECE data while enabling QP.
* ibv_query_ece() - get ECE options.

---
 CMakeLists.txt               |  2 +-
 debian/libibverbs1.symbols   |  5 ++++-
 libibverbs/CMakeLists.txt    |  2 +-
 libibverbs/driver.h          |  2 ++
 libibverbs/dummy_ops.c       | 14 ++++++++++++++
 libibverbs/libibverbs.map.in |  6 ++++++
 libibverbs/verbs.c           | 15 +++++++++++++++
 libibverbs/verbs.h           | 18 ++++++++++++++++++
 8 files changed, 61 insertions(+), 3 deletions(-)
CMakeLists.txt +1 -1
index 53843767..afbf4f31 100644
@@ -72,7 +72,7 @@ set(PACKAGE_VERSION "30.0")
 # When this is changed the values in these files need changing too:
 #   debian/control
 #   debian/libibverbs1.symbols
-set(IBVERBS_PABI_VERSION "25")
+set(IBVERBS_PABI_VERSION "26")
 set(IBVERBS_PROVIDER_SUFFIX "-rdmav${IBVERBS_PABI_VERSION}.so")
 
 #-------------------------
debian/libibverbs1.symbols +4 -1
index ec40b29b..0a6b3e70 100644
@@ -6,7 +6,8 @@ libibverbs.so.1 libibverbs1 #MINVER#
  IBVERBS_1.6@IBVERBS_1.6 24
  IBVERBS_1.7@IBVERBS_1.7 25
  IBVERBS_1.8@IBVERBS_1.8 28
- (symver)IBVERBS_PRIVATE_25 25
+ IBVERBS_1.9@IBVERBS_1.9 28
+ (symver)IBVERBS_PRIVATE_26 26
  ibv_ack_async_event@IBVERBS_1.0 1.1.6
  ibv_ack_async_event@IBVERBS_1.1 1.1.6
  ibv_ack_cq_events@IBVERBS_1.0 1.1.6
@@ -76,6 +77,7 @@ libibverbs.so.1 libibverbs1 #MINVER#
  ibv_qp_to_qp_ex@IBVERBS_1.6 24
  ibv_query_device@IBVERBS_1.0 1.1.6
  ibv_query_device@IBVERBS_1.1 1.1.6
+ ibv_query_ece@IBVERBS_1.9 28
  ibv_query_gid@IBVERBS_1.0 1.1.6
  ibv_query_gid@IBVERBS_1.1 1.1.6
  ibv_query_pkey@IBVERBS_1.0 1.1.6
@@ -98,6 +100,7 @@ libibverbs.so.1 libibverbs1 #MINVER#
  ibv_resize_cq@IBVERBS_1.0 1.1.6
  ibv_resize_cq@IBVERBS_1.1 1.1.6
  ibv_resolve_eth_l2_from_gid@IBVERBS_1.1 1.2.0
+ ibv_set_ece@IBVERBS_1.9 28
  ibv_wc_status_str@IBVERBS_1.1 1.1.6
  mbps_to_ibv_rate@IBVERBS_1.1 1.1.8
  mult_to_ibv_rate@IBVERBS_1.0 1.1.6
libibverbs/CMakeLists.txt +1 -1
index 43285489..a10bf103 100644
@@ -21,7 +21,7 @@ configure_file("libibverbs.map.in"
 
 rdma_library(ibverbs "${CMAKE_CURRENT_BINARY_DIR}/libibverbs.map"
   # See Documentation/versioning.md
-  1 1.8.${PACKAGE_VERSION}
+  1 1.9.${PACKAGE_VERSION}
   all_providers.c
   cmd.c
   cmd_ah.c
libibverbs/driver.h +2 -0
index a0e6f89a..f14ce537 100644
@@ -348,6 +348,7 @@ struct verbs_context_ops {
 			       const struct ibv_query_device_ex_input *input,
 			       struct ibv_device_attr_ex *attr,
 			       size_t attr_size);
+	int (*query_ece)(struct ibv_qp *qp, struct ibv_ece *ece);
 	int (*query_port)(struct ibv_context *context, uint8_t port_num,
 			  struct ibv_port_attr *port_attr);
 	int (*query_qp)(struct ibv_qp *qp, struct ibv_qp_attr *attr,
@@ -368,6 +369,7 @@ struct verbs_context_ops {
 	int (*rereg_mr)(struct verbs_mr *vmr, int flags, struct ibv_pd *pd,
 			void *addr, size_t length, int access);
 	int (*resize_cq)(struct ibv_cq *cq, int cqe);
+	int (*set_ece)(struct ibv_qp *qp, struct ibv_ece *ece);
 };
 
 static inline struct verbs_device *
libibverbs/dummy_ops.c +14 -0
index 32fec71f..b5f48be8 100644
@@ -450,6 +450,16 @@ static int resize_cq(struct ibv_cq *cq, int cqe)
 	return EOPNOTSUPP;
 }
 
+static int set_ece(struct ibv_qp *qp, struct ibv_ece *ece)
+{
+	return EOPNOTSUPP;
+}
+
+static int query_ece(struct ibv_qp *qp, struct ibv_ece *ece)
+{
+	return EOPNOTSUPP;
+}
+
 /*
  * Ops in verbs_dummy_ops simply return an EOPNOTSUPP error code when called, or
  * do nothing. They are placed in the ops structures if the provider does not
@@ -519,6 +529,7 @@ const struct verbs_context_ops verbs_dummy_ops = {
 	post_srq_recv,
 	query_device,
 	query_device_ex,
+	query_ece,
 	query_port,
 	query_qp,
 	query_rt_values,
@@ -529,6 +540,7 @@ const struct verbs_context_ops verbs_dummy_ops = {
 	req_notify_cq,
 	rereg_mr,
 	resize_cq,
+	set_ece,
 };
 
 /*
@@ -635,6 +647,7 @@ void verbs_set_ops(struct verbs_context *vctx,
 	SET_OP(ctx, post_srq_recv);
 	SET_PRIV_OP(ctx, query_device);
 	SET_OP(vctx, query_device_ex);
+	SET_PRIV_OP_IC(vctx, query_ece);
 	SET_PRIV_OP_IC(ctx, query_port);
 	SET_PRIV_OP(ctx, query_qp);
 	SET_OP(vctx, query_rt_values);
@@ -645,6 +658,7 @@ void verbs_set_ops(struct verbs_context *vctx,
 	SET_OP(ctx, req_notify_cq);
 	SET_PRIV_OP(ctx, rereg_mr);
 	SET_PRIV_OP(ctx, resize_cq);
+	SET_PRIV_OP_IC(vctx, set_ece);
 
 #undef SET_OP
 #undef SET_OP2
libibverbs/libibverbs.map.in +6 -0
index 5280cfe6..52ce0c80 100644
@@ -126,6 +126,12 @@ IBVERBS_1.8 {
 		ibv_reg_mr_iova2;
 } IBVERBS_1.7;
 
+IBVERBS_1.9 {
+	global:
+		ibv_query_ece;
+		ibv_set_ece;
+} IBVERBS_1.8;
+
 /* If any symbols in this stanza change ABI then the entire staza gets a new symbol
    version. See the top level CMakeLists.txt for this setting. */
 
libibverbs/verbs.c +15 -0
index 629f24c2..35d471e4 100644
@@ -1080,3 +1080,18 @@ free_resources:
 
 	return ret;
 }
+
+int ibv_set_ece(struct ibv_qp *qp, struct ibv_ece *ece)
+{
+	if (!ece->vendor_id || ece->comp_mask) {
+		errno = EINVAL;
+		return -1;
+	}
+
+	return get_ops(qp->context)->set_ece(qp, ece);
+}
+
+int ibv_query_ece(struct ibv_qp *qp, struct ibv_ece *ece)
+{
+	return get_ops(qp->context)->query_ece(qp, ece);
+}
libibverbs/verbs.h +18 -0
index 288985d5..0968c0aa 100644
@@ -1401,6 +1401,21 @@ static inline void ibv_wr_abort(struct ibv_qp_ex *qp)
 	qp->wr_abort(qp);
 }
 
+struct ibv_ece {
+	/*
+	 * Unique identifier of the provider vendor on the network.
+	 * The providers will set IEEE OUI here to distinguish
+	 * itself in non-homogenius network.
+	 */
+	uint32_t vendor_id;
+	/*
+	 * Provider specific attributes which are supported or
+	 * needed to be enabled by ECE users.
+	 */
+	uint32_t options;
+	uint32_t comp_mask;
+};
+
 struct ibv_comp_channel {
 	struct ibv_context     *context;
 	int			fd;
@@ -3342,6 +3357,9 @@ static inline uint16_t ibv_flow_label_to_udp_sport(uint32_t fl)
 	return (uint16_t)(fl_low | IB_ROCE_UDP_ENCAP_VALID_PORT_MIN);
 }
 
+int ibv_set_ece(struct ibv_qp *qp, struct ibv_ece *ece);
+int ibv_query_ece(struct ibv_qp *qp, struct ibv_ece *ece);
+
 #ifdef __cplusplus
 }
 #endif

--
2.25.2

#3 lore raw

PATCH 3/12 libibverbs: Document ECE API

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Add manual pages for libibverbs part of ECE.

---
 libibverbs/man/CMakeLists.txt     |  2 +
 libibverbs/man/ibv_query_ece.3.md | 56 ++++++++++++++++++++++++++++
 libibverbs/man/ibv_set_ece.3.md   | 61 +++++++++++++++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 libibverbs/man/ibv_query_ece.3.md
 create mode 100644 libibverbs/man/ibv_set_ece.3.md
libibverbs/man/CMakeLists.txt +2 -0
index e1d5edf8..c0ff7a25 100644
@@ -51,6 +51,7 @@ rdma_man_pages(
   ibv_post_srq_recv.3
   ibv_query_device.3
   ibv_query_device_ex.3
+  ibv_query_ece.3.md
   ibv_query_gid.3.md
   ibv_query_pkey.3.md
   ibv_query_port.3
@@ -65,6 +66,7 @@ rdma_man_pages(
   ibv_req_notify_cq.3.md
   ibv_rereg_mr.3.md
   ibv_resize_cq.3.md
+  ibv_set_ece.3.md
   ibv_srq_pingpong.1
   ibv_uc_pingpong.1
   ibv_ud_pingpong.1
libibverbs/man/ibv_query_ece.3.md new file +56 -0

56 lines not on this page · raw message

libibverbs/man/ibv_set_ece.3.md new file +61 -0

61 lines not on this page · raw message

--
2.25.2

#4 lore raw

PATCH 4/12 debian: Install all available librdmacm man pages

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

There is no need to be explicit for every man page in librdmacm, use simple '*' to install all rdma_*.3 man pages in one shot.

---
 debian/librdmacm-dev.install | 53 +-----------------------------------
 1 file changed, 1 insertion(+), 52 deletions(-)
debian/librdmacm-dev.install +1 -52
index e12c300a..68835cb0 100644
@@ -6,57 +6,6 @@ usr/include/rdma/rsocket.h
 usr/lib/*/librdmacm*.so
 usr/lib/*/librdmacm.a
 usr/lib/*/pkgconfig/librdmacm.pc
-usr/share/man/man3/rdma_accept.3
-usr/share/man/man3/rdma_ack_cm_event.3
-usr/share/man/man3/rdma_bind_addr.3
-usr/share/man/man3/rdma_connect.3
-usr/share/man/man3/rdma_create_ep.3
-usr/share/man/man3/rdma_create_event_channel.3
-usr/share/man/man3/rdma_create_id.3
-usr/share/man/man3/rdma_create_qp.3
-usr/share/man/man3/rdma_create_srq.3
-usr/share/man/man3/rdma_dereg_mr.3
-usr/share/man/man3/rdma_destroy_ep.3
-usr/share/man/man3/rdma_destroy_event_channel.3
-usr/share/man/man3/rdma_destroy_id.3
-usr/share/man/man3/rdma_destroy_qp.3
-usr/share/man/man3/rdma_destroy_srq.3
-usr/share/man/man3/rdma_disconnect.3
-usr/share/man/man3/rdma_establish.3
-usr/share/man/man3/rdma_event_str.3
-usr/share/man/man3/rdma_free_devices.3
-usr/share/man/man3/rdma_get_cm_event.3
-usr/share/man/man3/rdma_get_devices.3
-usr/share/man/man3/rdma_get_dst_port.3
-usr/share/man/man3/rdma_get_local_addr.3
-usr/share/man/man3/rdma_get_peer_addr.3
-usr/share/man/man3/rdma_get_recv_comp.3
-usr/share/man/man3/rdma_get_request.3
-usr/share/man/man3/rdma_get_send_comp.3
-usr/share/man/man3/rdma_get_src_port.3
-usr/share/man/man3/rdma_getaddrinfo.3
-usr/share/man/man3/rdma_init_qp_attr.3
-usr/share/man/man3/rdma_join_multicast.3
-usr/share/man/man3/rdma_join_multicast_ex.3
-usr/share/man/man3/rdma_leave_multicast.3
-usr/share/man/man3/rdma_listen.3
-usr/share/man/man3/rdma_migrate_id.3
-usr/share/man/man3/rdma_notify.3
-usr/share/man/man3/rdma_post_read.3
-usr/share/man/man3/rdma_post_readv.3
-usr/share/man/man3/rdma_post_recv.3
-usr/share/man/man3/rdma_post_recvv.3
-usr/share/man/man3/rdma_post_send.3
-usr/share/man/man3/rdma_post_sendv.3
-usr/share/man/man3/rdma_post_ud_send.3
-usr/share/man/man3/rdma_post_write.3
-usr/share/man/man3/rdma_post_writev.3
-usr/share/man/man3/rdma_reg_msgs.3
-usr/share/man/man3/rdma_reg_read.3
-usr/share/man/man3/rdma_reg_write.3
-usr/share/man/man3/rdma_reject.3
-usr/share/man/man3/rdma_resolve_addr.3
-usr/share/man/man3/rdma_resolve_route.3
-usr/share/man/man3/rdma_set_option.3
+usr/share/man/man3/rdma_*.3
 usr/share/man/man7/rdma_cm.7
 usr/share/man/man7/rsocket.7

--
2.25.2

#5 lore raw

PATCH 5/12 librdmacm: Provide interface to use ECE for external QPs

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Add the following calls to allow use of ECE for external QPs. Those QPs are not managed by librdmacm and can be any type and not strictly ibv_qp.

* rdma_set_local_ece() - provide to the librdmacm the desired ECE options to be used in REQ/REP handshake.
* rdma_get_remote_ece() - get ECE options received from the peer, so users will be able to accept/reject/mask supported ECE options.

---
 debian/librdmacm1.symbols |  3 +++
 librdmacm/CMakeLists.txt  |  2 +-
 librdmacm/cma.c           | 51 +++++++++++++++++++++++++++++++++++++++
 librdmacm/librdmacm.map   |  6 +++++
 librdmacm/rdma_cma.h      | 16 ++++++++++++
 5 files changed, 77 insertions(+), 1 deletion(-)
debian/librdmacm1.symbols +3 -0
index 996122f3..cc4d7a6c 100644
@@ -3,6 +3,7 @@ librdmacm.so.1 librdmacm1 #MINVER#
  RDMACM_1.0@RDMACM_1.0 1.0.15
  RDMACM_1.1@RDMACM_1.1 16
  RDMACM_1.2@RDMACM_1.2 23
+ RDMACM_1.3@RDMACM_1.3 28
  raccept@RDMACM_1.0 1.0.16
  rbind@RDMACM_1.0 1.0.16
  rclose@RDMACM_1.0 1.0.16
@@ -31,6 +32,7 @@ librdmacm.so.1 librdmacm1 #MINVER#
  rdma_get_cm_event@RDMACM_1.0 1.0.15
  rdma_get_devices@RDMACM_1.0 1.0.15
  rdma_get_dst_port@RDMACM_1.0 1.0.19
+ rdma_get_remote_ece@RDMACM_1.3 28
  rdma_get_request@RDMACM_1.0 1.0.15
  rdma_get_src_port@RDMACM_1.0 1.0.19
  rdma_getaddrinfo@RDMACM_1.0 1.0.15
@@ -44,6 +46,7 @@ librdmacm.so.1 librdmacm1 #MINVER#
  rdma_reject@RDMACM_1.0 1.0.15
  rdma_resolve_addr@RDMACM_1.0 1.0.15
  rdma_resolve_route@RDMACM_1.0 1.0.15
+ rdma_set_local_ece@RDMACM_1.3 28
  rdma_set_option@RDMACM_1.0 1.0.15
  rfcntl@RDMACM_1.0 1.0.16
  rgetpeername@RDMACM_1.0 1.0.16
librdmacm/CMakeLists.txt +1 -1
index f0767cff..b01fef4f 100644
@@ -11,7 +11,7 @@ publish_headers(infiniband
 
 rdma_library(rdmacm librdmacm.map
   # See Documentation/versioning.md
-  1 1.2.${PACKAGE_VERSION}
+  1 1.3.${PACKAGE_VERSION}
   acm.c
   addrinfo.c
   cma.c
librdmacm/cma.c +51 -0

72 lines not on this page · raw message

librdmacm/librdmacm.map +6 -0
index 7f55e844..f29a23b4 100644
@@ -82,3 +82,9 @@ RDMACM_1.2 {
 		rdma_establish;
 		rdma_init_qp_attr;
 } RDMACM_1.1;
+
+RDMACM_1.3 {
+	global:
+		rdma_get_remote_ece;
+		rdma_set_local_ece;
+} RDMACM_1.2;
librdmacm/rdma_cma.h +16 -0
index 19050332..c42a28f7 100644
@@ -753,6 +753,22 @@ void rdma_freeaddrinfo(struct rdma_addrinfo *res);
  */
 int rdma_init_qp_attr(struct rdma_cm_id *id, struct ibv_qp_attr *qp_attr,
 		      int *qp_attr_mask);
+
+/**
+ * rdma_set_local_ece - Set local ECE options to be used for REQ/REP
+ * communication. In use to implement ECE handshake in external QP.
+ * @id: Communication identifier to establish connection
+ * @ece: ECE parameters
+ */
+int rdma_set_local_ece(struct rdma_cm_id *id, struct ibv_ece *ece);
+
+/**
+ * rdma_get_remote_ece - Provide remote ECE parameters as received
+ * in REQ/REP events. In use to implement ECE handshake in external QP.
+ * @id: Communication identifier to establish connection
+ * @ece: ECE parameters
+ */
+int rdma_get_remote_ece(struct rdma_cm_id *id, struct ibv_ece *ece);
 #ifdef __cplusplus
 }
 #endif

--
2.25.2

#6 lore raw

PATCH 6/12 librdmacm: Connect rdma_connect to the ECE

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

The ECE options are handled to the kernel at the time of connection request, e.g. rdma_connect().

---
 librdmacm/cma.c          | 9 +++++++++
 librdmacm/rdma_cma_abi.h | 6 ++++++
 2 files changed, 15 insertions(+)
librdmacm/cma.c +9 -0
index a12ed1e0..91735225 100644
@@ -1547,6 +1547,13 @@ static void ucma_copy_conn_param_to_kern(struct cma_id_private *id_priv,
 	}
 }
 
+static void ucma_copy_ece_param_to_kern_req(struct cma_id_private *id_priv,
+					    struct ucma_abi_ece *dst)
+{
+	dst->vendor_id = id_priv->local_ece.vendor_id;
+	dst->attr_mod = id_priv->local_ece.options;
+}
+
 int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
 {
 	uint32_t qp_num = conn_param ? conn_param->qp_num : 0;
@@ -1579,6 +1586,8 @@ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
 	ucma_copy_conn_param_to_kern(id_priv, &cmd.conn_param, conn_param,
 				     qp_num, srq);
 
+	ucma_copy_ece_param_to_kern_req(id_priv, &cmd.ece);
+
 	ret = write(id->channel->fd, &cmd, sizeof cmd);
 	if (ret != sizeof cmd)
 		return (ret >= 0) ? ERR(ENODATA) : -1;
librdmacm/rdma_cma_abi.h +6 -0
index ab4adb00..6451862e 100644
@@ -223,6 +223,11 @@ struct ucma_abi_ud_param {
 	__u8 reserved2[4];  /* Round to 8-byte boundary to support 32/64 */
 };
 
+struct ucma_abi_ece {
+	__u32 vendor_id;
+	__u32 attr_mod;
+};
+
 struct ucma_abi_connect {
 	__u32 cmd;
 	__u16 in;
@@ -230,6 +235,7 @@ struct ucma_abi_connect {
 	struct ucma_abi_conn_param conn_param;
 	__u32 id;
 	__u32 reserved;
+	struct ucma_abi_ece ece;
 };
 
 struct ucma_abi_listen {

--
2.25.2

#7 lore raw

PATCH 7/12 librdmacm: Return ECE results through rdma_accept

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Passive side (server) returns its answer through REP message, which is constructed as a result of rdma_accept().

---
 librdmacm/cma.c          | 9 +++++++++
 librdmacm/rdma_cma_abi.h | 1 +
 2 files changed, 10 insertions(+)
librdmacm/cma.c +9 -0
index 91735225..3c356eca 100644
@@ -1668,6 +1668,14 @@ err:
 	return ret;
 }
 
+static void ucma_copy_ece_param_to_kern_rep(struct cma_id_private *id_priv,
+					    struct ucma_abi_ece *dst)
+{
+	/* Return result with same ID as received. */
+	dst->vendor_id = id_priv->remote_ece.vendor_id;
+	dst->attr_mod = id_priv->local_ece.options;
+}
+
 int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
 {
 	uint32_t qp_num = id->qp ? id->qp->qp_num : conn_param->qp_num;
@@ -1709,6 +1717,7 @@ int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
 	cmd.uid = (uintptr_t) id_priv;
 	ucma_copy_conn_param_to_kern(id_priv, &cmd.conn_param, conn_param,
 				     qp_num, srq);
+	ucma_copy_ece_param_to_kern_rep(id_priv, &cmd.ece);
 
 	ret = write(id->channel->fd, &cmd, sizeof cmd);
 	if (ret != sizeof cmd) {
librdmacm/rdma_cma_abi.h +1 -0
index 6451862e..4639941b 100644
@@ -254,6 +254,7 @@ struct ucma_abi_accept {
 	struct ucma_abi_conn_param conn_param;
 	__u32 id;
 	__u32 reserved;
+	struct ucma_abi_ece ece;
 };
 
 struct ucma_abi_reject {

--
2.25.2

#8 lore raw

PATCH 8/12 librdmacm: Add an option to reject ECE request

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

IBTA has specific rejected reason for users who doesn't want proposed ECE options in request messages. Provide special version (rdma_reject_ece) to mark such rejects.

---
 debian/librdmacm1.symbols |  1 +
 librdmacm/cma.c           | 19 +++++++++++++++++--
 librdmacm/librdmacm.map   |  1 +
 librdmacm/rdma_cma.h      |  8 ++++++++
 librdmacm/rdma_cma_abi.h  |  7 ++++++-
 5 files changed, 33 insertions(+), 3 deletions(-)
debian/librdmacm1.symbols +1 -0
index cc4d7a6c..ce5ffd20 100644
@@ -44,6 +44,7 @@ librdmacm.so.1 librdmacm1 #MINVER#
  rdma_migrate_id@RDMACM_1.0 1.0.15
  rdma_notify@RDMACM_1.0 1.0.15
  rdma_reject@RDMACM_1.0 1.0.15
+ rdma_reject_ece@RDMACM_1.3 28
  rdma_resolve_addr@RDMACM_1.0 1.0.15
  rdma_resolve_route@RDMACM_1.0 1.0.15
  rdma_set_local_ece@RDMACM_1.3 28
librdmacm/cma.c +17 -2
index 3c356eca..fc6e6a89 100644
@@ -1731,8 +1731,9 @@ int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param)
 	return ucma_complete(id);
 }
 
-int rdma_reject(struct rdma_cm_id *id, const void *private_data,
-		uint8_t private_data_len)
+static int reject_with_reason(struct rdma_cm_id *id, const void *private_data,
+			      uint8_t private_data_len,
+			      enum ucm_abi_reject_reason reason)
 {
 	struct ucma_abi_reject cmd;
 	struct cma_id_private *id_priv;
@@ -1746,6 +1747,7 @@ int rdma_reject(struct rdma_cm_id *id, const void *private_data,
 		memcpy(cmd.private_data, private_data, private_data_len);
 		cmd.private_data_len = private_data_len;
 	}
+	cmd.reason = reason;
 
 	ret = write(id->channel->fd, &cmd, sizeof cmd);
 	if (ret != sizeof cmd)
@@ -1754,6 +1756,19 @@ int rdma_reject(struct rdma_cm_id *id, const void *private_data,
 	return 0;
 }
 
+int rdma_reject(struct rdma_cm_id *id, const void *private_data,
+		uint8_t private_data_len)
+{
+	return reject_with_reason(id, private_data, private_data_len, 0);
+}
+
+int rdma_reject_ece(struct rdma_cm_id *id, const void *private_data,
+		    uint8_t private_data_len)
+{
+	return reject_with_reason(id, private_data, private_data_len,
+				  RDMA_USER_CM_REJ_VENDOR_OPTION_NOT_SUPPORTED);
+}
+
 int rdma_notify(struct rdma_cm_id *id, enum ibv_event_type event)
 {
 	struct ucma_abi_notify cmd;
librdmacm/librdmacm.map +1 -0
index f29a23b4..d162ef09 100644
@@ -86,5 +86,6 @@ RDMACM_1.2 {
 RDMACM_1.3 {
 	global:
 		rdma_get_remote_ece;
+		rdma_reject_ece;
 		rdma_set_local_ece;
 } RDMACM_1.2;
librdmacm/rdma_cma.h +8 -0
index c42a28f7..e1f4e236 100644
@@ -524,6 +524,14 @@ int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
 int rdma_reject(struct rdma_cm_id *id, const void *private_data,
 		uint8_t private_data_len);
 
+/**
+ * rdma_reject_ece - Called to reject a connection request with ECE
+ * rejected reason.
+ * The same as rdma_reject()
+ */
+int rdma_reject_ece(struct rdma_cm_id *id, const void *private_data,
+		uint8_t private_data_len);
+
 /**
  * rdma_notify - Notifies the librdmacm of an asynchronous event.
  * @id: RDMA identifier.
librdmacm/rdma_cma_abi.h +6 -1
index 4639941b..911863cc 100644
@@ -73,6 +73,10 @@ enum {
 	UCMA_CMD_JOIN_MCAST
 };
 
+enum ucm_abi_reject_reason {
+	RDMA_USER_CM_REJ_VENDOR_OPTION_NOT_SUPPORTED = 35
+};
+
 struct ucma_abi_cmd_hdr {
 	__u32 cmd;
 	__u16 in;
@@ -263,7 +267,8 @@ struct ucma_abi_reject {
 	__u16 out;
 	__u32 id;
 	__u8  private_data_len;
-	__u8  reserved[3];
+	__u8  reason; /* enum ucm_abi_reject_reason */
+	__u8  reserved[2];
 	__u8  private_data[RDMA_MAX_PRIVATE_DATA];
 };
 

--
2.25.2

#9 lore raw

PATCH 9/12 librdmacm: Implement ECE handshake logic

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Perform ECE handshake through REQ/REP messages. The REQ message initiated by active side towards passive side and carries the ECE data. The passive side returns its decision in REP message.

---
 librdmacm/cma.c          | 46 ++++++++++++++++++++++++++++++++++------
 librdmacm/rdma_cma_abi.h |  1 +
 2 files changed, 40 insertions(+), 7 deletions(-)
librdmacm/cma.c +39 -7
index fc6e6a89..db562496 100644
@@ -1398,10 +1398,20 @@ static int init_ece(struct rdma_cm_id *id, struct ibv_qp *qp)
 	id_priv->local_ece.vendor_id = ece.vendor_id;
 	id_priv->local_ece.options = ece.options;
 
+	if (!id_priv->remote_ece.vendor_id)
+		return 0;
+
+	/* This QP was created due to REQ event */
+	ece.vendor_id = id_priv->remote_ece.vendor_id;
+	ece.options = id_priv->remote_ece.options;
+	ret = ibv_set_ece(qp, &ece);
+	if (ret)
+		return (errno == ECONNREFUSED) ? errno : 0;
+
+	id_priv->local_ece.options = ece.options;
 	return 0;
 }
 
-
 int rdma_create_qp_ex(struct rdma_cm_id *id,
 		      struct ibv_qp_init_attr_ex *attr)
 {
@@ -2070,8 +2080,8 @@ static int ucma_query_req_info(struct rdma_cm_id *id)
 	return 0;
 }
 
-static int ucma_process_conn_req(struct cma_event *evt,
-				 uint32_t handle)
+static int ucma_process_conn_req(struct cma_event *evt, uint32_t handle,
+				 struct ucma_abi_ece *ece)
 {
 	struct cma_id_private *id_priv;
 	int ret;
@@ -2091,6 +2101,8 @@ static int ucma_process_conn_req(struct cma_event *evt,
 	ucma_insert_id(id_priv);
 	id_priv->initiator_depth = evt->event.param.conn.initiator_depth;
 	id_priv->responder_resources = evt->event.param.conn.responder_resources;
+	id_priv->remote_ece.vendor_id = ece->vendor_id;
+	id_priv->remote_ece.options = ece->attr_mod;
 
 	if (evt->id_priv->sync) {
 		ret = rdma_migrate_id(&id_priv->id, NULL);
@@ -2139,6 +2151,26 @@ err:
 	return ret;
 }
 
+static int ucma_process_conn_resp_ece(struct cma_id_private *id_priv,
+				      struct ucma_abi_ece *ece)
+{
+	struct ibv_ece ibv_ece = { .vendor_id = ece->vendor_id,
+				   .options = ece->attr_mod };
+	int ret;
+
+	ret = ibv_set_ece(id_priv->id.qp, &ibv_ece);
+	if (ret && errno == EOPNOTSUPP)
+		goto out;
+
+	if (ret && errno == ECONNREFUSED)
+		/* libibverbs provider asked to reject connection */
+		return -1;
+
+	id_priv->local_ece.options = ibv_ece.options;
+out:
+	return ucma_process_conn_resp(id_priv);
+}
+
 static int ucma_process_join(struct cma_event *evt)
 {
 	evt->mc->mgid = evt->event.param.ud.ah_attr.grh.dgid;
@@ -2275,7 +2307,7 @@ retry:
 		else
 			ucma_copy_conn_event(evt, &resp.param.conn);
 
-		ret = ucma_process_conn_req(evt, resp.id);
+		ret = ucma_process_conn_req(evt, resp.id, &resp.ece);
 		if (ret)
 			goto retry;
 		break;
@@ -2284,8 +2316,8 @@ retry:
 		if (!evt->id_priv->id.qp) {
 			evt->event.event = RDMA_CM_EVENT_CONNECT_RESPONSE;
 		} else {
-			evt->event.status =
-				ucma_process_conn_resp(evt->id_priv);
+			evt->event.status = ucma_process_conn_resp_ece(
+				evt->id_priv, &resp.ece);
 			if (!evt->event.status)
 				evt->event.event = RDMA_CM_EVENT_ESTABLISHED;
 			else {
@@ -2635,7 +2667,7 @@ int rdma_get_remote_ece(struct rdma_cm_id *id, struct ibv_ece *ece)
 {
 	struct cma_id_private *id_priv;
 
-	if (id->qp || !ece)
+	if (!id || id->qp || !ece)
 		return ERR(EINVAL);
 
 	id_priv = container_of(id, struct cma_id_private, id);
librdmacm/rdma_cma_abi.h +1 -0
index 911863cc..f24417dd 100644
@@ -334,6 +334,7 @@ struct ucma_abi_event_resp {
 		struct ucma_abi_conn_param conn;
 		struct ucma_abi_ud_param   ud;
 	} param;
+	struct ucma_abi_ece ece;
 };
 
 struct ucma_abi_set_option {

--
2.25.2

#10 lore raw

PATCH 10/12 librdmacm: Document ECE API

In reply to Leon Romanovsky

From: Leon Romanovsky <[email protected]>

Add manual pages for librdmacm part of ECE.

---
 librdmacm/man/CMakeLists.txt           |  2 +
 librdmacm/man/rdma_cm.7                | 14 +++++-
 librdmacm/man/rdma_get_remote_ece.3.md | 61 +++++++++++++++++++++++++
 librdmacm/man/rdma_set_local_ece.3.md  | 62 ++++++++++++++++++++++++++
 4 files changed, 138 insertions(+), 1 deletion(-)
 create mode 100644 librdmacm/man/rdma_get_remote_ece.3.md
 create mode 100644 librdmacm/man/rdma_set_local_ece.3.md
librdmacm/man/CMakeLists.txt +2 -0
index 2d1efbff..6159c3e3 100644
@@ -29,6 +29,7 @@ rdma_man_pages(
   rdma_get_local_addr.3
   rdma_get_peer_addr.3
   rdma_get_recv_comp.3
+  rdma_get_remote_ece.3.md
   rdma_get_request.3
   rdma_get_send_comp.3
   rdma_get_src_port.3
@@ -56,6 +57,7 @@ rdma_man_pages(
   rdma_resolve_addr.3
   rdma_resolve_route.3
   rdma_server.1
+  rdma_set_local_ece.3.md
   rdma_set_option.3
   rdma_xclient.1
   rdma_xserver.1
librdmacm/man/rdma_cm.7 +13 -1
index 8e5ad99e..122c96f0 100644
@@ -26,6 +26,10 @@ parameter in specific calls.  If an event channel is provided, an rdma_cm identi
 will report its event data (results of connecting, for example), on that channel.
 If a channel is not provided, then all rdma_cm operations for the selected
 rdma_cm identifier will block until they complete.
+.P
+The RDMA CM gives an option to different libibverbs providers to advertise and
+use various specific to that provider QP configuration options. This functionality
+is called ECE (enhanced connection establishment).
 .SH "RDMA VERBS"
 The rdma_cm supports the full range of verbs available through the libibverbs
 library and interfaces.  However, it also provides wrapper functions for some
@@ -111,6 +115,8 @@ destroy the QP
 release the rdma_cm_id
 .IP rdma_destroy_event_channel
 release the event channel
+.IP rdma_set_local_ece
+set desired ECE options
 .P
 An almost identical process is used to setup unreliable datagram (UD)
 communication between nodes.  No actual connection is formed between QPs
@@ -157,6 +163,10 @@ release the connected rdma_cm_id
 release the listening rdma_cm_id
 .IP rdma_destroy_event_channel
 release the event channel
+.IP rdma_get_remote_ece
+get ECe options sent by the client
+.IP rdma_set_local_ece
+set desired ECE options
 .SH "RETURN CODES"
 .IP "=  0"
 success
@@ -198,6 +208,7 @@ rdma_get_dst_port(3),
 rdma_get_local_addr(3),
 rdma_get_peer_addr(3),
 rdma_get_recv_comp(3),
+rdma_get_remote_ece(3),
 rdma_get_request(3),
 rdma_get_send_comp(3),
 rdma_get_src_port(3),
@@ -221,7 +232,8 @@ rdma_reg_write(3),
 rdma_reject(3),
 rdma_resolve_addr(3),
 rdma_resolve_route(3),
-rdma_set_option(3)
+rdma_get_remote_ece(3),
+rdma_set_option(3),
 mckey(1),
 rdma_client(1),
 rdma_server(1),
librdmacm/man/rdma_get_remote_ece.3.md new file +61 -0

61 lines not on this page · raw message

librdmacm/man/rdma_set_local_ece.3.md new file +62 -0

62 lines not on this page · raw message

--
2.25.2

#11 lore raw

PATCH 11/12 pyverbs: Add support for ECE

In reply to Leon Romanovsky

From: Ido Kalir <[email protected]>

ECE (enhanced connection establishment) is a mechanism that gives an option to different libibverbs providers to advertise and use various provider-specific QP configuration options.
Add those verbs:
ibv_query_ece - get QPs ece.
ibv_set_ece - set the QPs ece.
rdma_set_local_ece - set the local CMs ece. rdma_get_remote_ece - get the remote CM ece from the connection request.

---
 pyverbs/cmid.pyx       | 23 ++++++++++++++++++++-
 pyverbs/libibverbs.pxd |  7 +++++++
 pyverbs/librdmacm.pxd  |  2 ++
 pyverbs/qp.pxd         |  3 +++
 pyverbs/qp.pyx         | 45 ++++++++++++++++++++++++++++++++++++++++--
 5 files changed, 77 insertions(+), 3 deletions(-)
pyverbs/cmid.pyx +22 -1
index 66d73268..2505ec70 100755
@@ -1,7 +1,7 @@
 from libc.string cimport memset
 
 from pyverbs.pyverbs_error import PyverbsUserError
-from pyverbs.qp cimport QPInitAttr, QPAttr
+from pyverbs.qp cimport QPInitAttr, QPAttr, ECE
 from pyverbs.base import PyverbsRDMAErrno
 cimport pyverbs.libibverbs_enums as e
 cimport pyverbs.librdmacm_enums as ce
@@ -424,6 +424,27 @@ cdef class CMID(PyverbsCM):
         if ret != 0:
             raise PyverbsRDMAErrno('Failed to Complete an active connection request')
 
+    def set_local_ece(self, ECE ece):
+        """
+        Set local ECE paraemters to be used for REQ/REP communication.
+        :param ece: ECE object with the requested configuration
+        :return: None
+        """
+        rc = cm.rdma_set_local_ece(self.id, &ece.ece)
+        if rc != 0:
+            raise PyverbsRDMAErrno('Failed to set local ECE')
+
+    def get_remote_ece(self):
+        """
+        Get ECE parameters as were received from the communication peer.
+        :return: ECE object with the ece configuration
+        """
+        ece = ECE()
+        rc = cm.rdma_get_remote_ece(self.id, &ece.ece)
+        if rc != 0:
+            raise PyverbsRDMAErrno('Failed to get remote ECE')
+        return ece
+
     def create_qp(self, QPInitAttr qp_init not None):
         """
         Create a QP, which is associated with CMID.
pyverbs/libibverbs.pxd +7 -0
index 6ffa303c..52f51f07 100755
@@ -475,6 +475,11 @@ cdef extern from 'infiniband/verbs.h':
         uint64_t        wr_id
         unsigned int    wr_flags
 
+    cdef struct ibv_ece:
+        uint32_t vendor_id
+        uint32_t options
+        uint32_t comp_mask
+
     ibv_device **ibv_get_device_list(int *n)
     void ibv_free_device_list(ibv_device **list)
     ibv_context *ibv_open_device(ibv_device *device)
@@ -599,3 +604,5 @@ cdef extern from 'infiniband/verbs.h':
 cdef extern from 'infiniband/driver.h':
     int ibv_query_gid_type(ibv_context *context, uint8_t port_num,
                            unsigned int index, ibv_gid_type *type)
+    int ibv_set_ece(ibv_qp *qp, ibv_ece *ece)
+    int ibv_query_ece(ibv_qp *qp, ibv_ece *ece)
pyverbs/librdmacm.pxd +2 -0
index 03c0cddc..ff579205 100755
@@ -97,6 +97,8 @@ cdef extern from '<rdma/rdma_cma.h>':
     int rdma_create_id(rdma_event_channel *channel, rdma_cm_id **id,
                        void *context, rdma_port_space ps)
     int rdma_destroy_id(rdma_cm_id *id)
+    int rdma_get_remote_ece(rdma_cm_id *id, ibv_ece *ece)
+    int rdma_set_local_ece(rdma_cm_id *id, ibv_ece *ece)
     int rdma_get_request(rdma_cm_id *listen, rdma_cm_id **id)
     int rdma_bind_addr(rdma_cm_id *id, sockaddr *addr)
     int rdma_resolve_addr(rdma_cm_id *id, sockaddr *src_addr,
pyverbs/qp.pxd +3 -0
index 209a2438..1294560a 100644
@@ -43,3 +43,6 @@ cdef class DataBuffer(PyverbsCM):
 
 cdef class QPEx(QP):
     cdef v.ibv_qp_ex *qp_ex
+
+cdef class ECE(PyverbsCM):
+    cdef v.ibv_ece ece
pyverbs/qp.pyx +43 -2

64 lines not on this page · raw message

--
2.25.2

#12 lore raw

PATCH 12/12 tests: Add test for rdmacm ECE mechanism

In reply to Leon Romanovsky

From: Ido Kalir <[email protected]>

Add test case that use the ECE mechanism in RDMA CM connection establishment.

---
 tests/rdmacm_utils.py | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
tests/rdmacm_utils.py +17 -1
index c71bab18..d8d22f65 100755
@@ -4,10 +4,12 @@
 Provide some useful helper function for pyverbs rdmacm' tests.
 """
 from tests.utils import validate, poll_cq, get_send_element, get_recv_wr
-from pyverbs.pyverbs_error import PyverbsError
+from pyverbs.pyverbs_error import PyverbsError, PyverbsRDMAError
 from tests.base import CMResources
 from pyverbs.cmid import CMEvent
 import pyverbs.cm_enums as ce
+import unittest
+import errno
 import os
 
 events_dict = {ce.RDMA_CM_EVENT_ADDR_ERROR: 'Resolve Address Error',
@@ -117,6 +119,13 @@ def event_handler(agr_obj):
         agr_obj.create_qp()
         param = agr_obj.create_conn_param()
         if agr_obj.with_ext_qp:
+            try:
+                ece = agr_obj.qp.query_ece()
+                agr_obj.cmid.set_local_ece(ece)
+            except PyverbsRDMAError as ex:
+                if ex.error_code == errno.EOPNOTSUPP:
+                    pass
+                raise ex
             param.qpn = agr_obj.qp.qp_num
         agr_obj.cmid.connect(param)
     elif cm_event.event_type == ce.RDMA_CM_EVENT_CONNECT_REQUEST:
@@ -124,6 +133,13 @@ def event_handler(agr_obj):
         param = agr_obj.create_conn_param()
         agr_obj.create_qp()
         if agr_obj.with_ext_qp:
+            try:
+                ece = agr_obj.child_id.get_remote_ece()
+                agr_obj.qp.set_ece(ece)
+            except PyverbsRDMAError as ex:
+                if ex.error_code == errno.EOPNOTSUPP:
+                    pass
+                raise ex
             agr_obj.modify_ext_qp_to_rts()
             param.qpn = agr_obj.qp.qp_num
         agr_obj.child_id.accept(param)

--
2.25.2