tools: k3_gen_x509_cert: Allow selecting early JTAG debug value
PATCH 1/1 tools: k3_gen_x509_cert: Allow selecting early JTAG debug value
When authenticating the initial boot binary the ROM will check a debug type value in the certificate and based on that open JTAG access to that core.
The default is currently full access, on HS this is useful for early developers, but should not be the default as to prevent end system integrators from unintentionally leaving this open.
On non-HS devices JTAG is left open anyway so this does not change behavior on those devices. Change the default to off and allow it to be switched back on by command line flag if needed.
--- tools/k3_gen_x509_cert.sh | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
tools/k3_gen_x509_cert.sh +11 -3
@@ -12,6 +12,7 @@ RAND_KEY=eckey.pem LOADADDR=0x41c00000 BOOTCORE_OPTS=0 BOOTCORE=16 +DEBUG_TYPE=0 gen_degen_template() { cat << 'EOF' > degen-template.txt
@@ -79,7 +80,7 @@ cat << 'EOF' > x509-template.txt [ debug ] debugUID = FORMAT:HEX,OCT:0000000000000000000000000000000000000000000000000000000000000000 - debugType = INTEGER:4 + debugType = INTEGER:TEST_DEBUG_TYPE coreDbgEn = INTEGER:0 coreDbgSecEn = INTEGER:0 EOF
@@ -151,8 +152,9 @@ options_help[k]="key_file:file with key inside it. If not provided script genera options_help[o]="output_file:Name of the final output file. default to $OUTPUT" options_help[c]="core_id:target core id on which the image would be running. Default to $BOOTCORE" options_help[l]="loadaddr: Target load address of the binary in hex. Default to $LOADADDR" +options_help[d]="debug_type: Debug type, set to 4 to enable early JTAG. Default to $DEBUG_TYPE" -while getopts "b:k:o:c:l:h" opt +while getopts "b:k:o:c:l:d:h" opt do case $opt in b)
@@ -170,6 +172,9 @@ do c) BOOTCORE=$OPTARG ;; + d) + DEBUG_TYPE=$OPTARG + ;; h) usage exit 0
@@ -224,12 +229,15 @@ gen_cert() { #echo " LOADADDR = 0x$ADDR" #echo " IMAGE_SIZE = $BIN_SIZE" #echo " CERT_TYPE = $CERTTYPE" + #echo " DEBUG_TYPE = $DEBUG_TYPE" sed -e "s/TEST_IMAGE_LENGTH/$BIN_SIZE/" \ -e "s/TEST_IMAGE_SHA_VAL/$SHA_VAL/" \ -e "s/TEST_CERT_TYPE/$CERTTYPE/" \ -e "s/TEST_BOOT_CORE_OPTS/$BOOTCORE_OPTS/" \ -e "s/TEST_BOOT_CORE/$BOOTCORE/" \ - -e "s/TEST_BOOT_ADDR/$ADDR/" x509-template.txt > $TEMP_X509 + -e "s/TEST_BOOT_ADDR/$ADDR/" \ + -e "s/TEST_DEBUG_TYPE/$DEBUG_TYPE/" \ + x509-template.txt > $TEMP_X509 openssl req -new -x509 -key $KEY -nodes -outform DER -out $CERT -config $TEMP_X509 -sha512 }
Signature · 1 line
2.17.1
PATCH 1/1 tools: k3_gen_x509_cert: Allow selecting early JTAG debug value
Quoted 7 lines · Andrew F. Davis
When authenticating the initial boot binary the ROM will check a debug type value in the certificate and based on that open JTAG access to that core.
The default is currently full access, on HS this is useful for early developers, but should not be the default as to prevent end system integrators from unintentionally leaving this open.
Won't JTAG access is useful for early developers. UART as well not available at this point. What we offer out of the box is not a production ready secure system. I would prefer to have it enabled by default.
Thanks and regards,
Lokesh
Quoted 70 lines
On non-HS devices JTAG is left open anyway so this does not change behavior on those devices. Change the default to off and allow it to be switched back on by command line flag if needed.
Signed-off-by Andrew F. Davis <[email protected]>--- tools/k3_gen_x509_cert.sh | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)tools/k3_gen_x509_cert.sh +11
-3@@ -12,6 +12,7 @@ RAND_KEY=eckey.pem LOADADDR=0x41c00000 BOOTCORE_OPTS=0 BOOTCORE=16 +DEBUG_TYPE=0 gen_degen_template() { cat << 'EOF' > degen-template.txt@@ -79,7 +80,7 @@ cat << 'EOF' > x509-template.txt [ debug ] debugUID = FORMAT:HEX,OCT:0000000000000000000000000000000000000000000000000000000000000000 - debugType = INTEGER:4 + debugType = INTEGER:TEST_DEBUG_TYPE coreDbgEn = INTEGER:0 coreDbgSecEn = INTEGER:0 EOF@@ -151,8 +152,9 @@ options_help[k]="key_file:file with key inside it. If not provided script genera options_help[o]="output_file:Name of the final output file. default to $OUTPUT" options_help[c]="core_id:target core id on which the image would be running. Default to $BOOTCORE" options_help[l]="loadaddr: Target load address of the binary in hex. Default to $LOADADDR" +options_help[d]="debug_type: Debug type, set to 4 to enable early JTAG. Default to $DEBUG_TYPE" -while getopts "b:k:o:c:l:h" opt +while getopts "b:k:o:c:l:d:h" opt do case $opt in b)@@ -170,6 +172,9 @@ do c) BOOTCORE=$OPTARG ;; + d) + DEBUG_TYPE=$OPTARG + ;; h) usage exit 0@@ -224,12 +229,15 @@ gen_cert() { #echo " LOADADDR = 0x$ADDR" #echo " IMAGE_SIZE = $BIN_SIZE" #echo " CERT_TYPE = $CERTTYPE" + #echo " DEBUG_TYPE = $DEBUG_TYPE" sed -e "s/TEST_IMAGE_LENGTH/$BIN_SIZE/" \ -e "s/TEST_IMAGE_SHA_VAL/$SHA_VAL/" \ -e "s/TEST_CERT_TYPE/$CERTTYPE/" \ -e "s/TEST_BOOT_CORE_OPTS/$BOOTCORE_OPTS/" \ -e "s/TEST_BOOT_CORE/$BOOTCORE/" \ - -e "s/TEST_BOOT_ADDR/$ADDR/" x509-template.txt > $TEMP_X509 + -e "s/TEST_BOOT_ADDR/$ADDR/" \ + -e "s/TEST_DEBUG_TYPE/$DEBUG_TYPE/" \ + x509-template.txt > $TEMP_X509 openssl req -new -x509 -key $KEY -nodes -outform DER -out $CERT -config $TEMP_X509 -sha512 }
PATCH 1/1 tools: k3_gen_x509_cert: Allow selecting early JTAG debug value
Quoted 7 lines · Lokesh Vutla
Quoted 4 lines · Andrew F. Davis
When authenticating the initial boot binary the ROM will check a debug type value in the certificate and based on that open JTAG access to that core.
Quoted 8 lines
Quoted 3 lines
The default is currently full access, on HS this is useful for early developers, but should not be the default as to prevent end system integrators from unintentionally leaving this open.
Won't JTAG access is useful for early developers. UART as well not available at this point. What we offer out of the box is not a production ready secure system. I would prefer to have it enabled by default.
Who are these early developers? Pre-SYSFW on HS is a harsh environment, firewalls and other pitfalls limit one to only what is needed to get SYSFW loaded. Only a handful of folks will ever touch the source this early, and they will be using a GP device for that development, in which case debug is enabled, even with this change.
I'd guess I'm the only developer touching code this early on HS, I say this as so far I'm the only one who has noticed that there is a ROM issue that makes early debug on HS almost unusable.
Accidentally leaving this open completely defeats the chain of trust, I guarantee some production system will do this if we leave JTAG open by default, it happens all the time.
So debug doesn't work here anyway, no one uses it and those who do can flip this bit with the command line flag, and leaving it on will lead to a huge security issue for one of our customers.
Andrew
Quoted 73 lines
Thanks and regards,
LokeshQuoted 70 lines
On non-HS devices JTAG is left open anyway so this does not change behavior on those devices. Change the default to off and allow it to be switched back on by command line flag if needed.
Signed-off-by Andrew F. Davis <[email protected]>--- tools/k3_gen_x509_cert.sh | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)tools/k3_gen_x509_cert.sh +11
-3@@ -12,6 +12,7 @@ RAND_KEY=eckey.pem LOADADDR=0x41c00000 BOOTCORE_OPTS=0 BOOTCORE=16 +DEBUG_TYPE=0 gen_degen_template() { cat << 'EOF' > degen-template.txt@@ -79,7 +80,7 @@ cat << 'EOF' > x509-template.txt [ debug ] debugUID = FORMAT:HEX,OCT:0000000000000000000000000000000000000000000000000000000000000000 - debugType = INTEGER:4 + debugType = INTEGER:TEST_DEBUG_TYPE coreDbgEn = INTEGER:0 coreDbgSecEn = INTEGER:0 EOF@@ -151,8 +152,9 @@ options_help[k]="key_file:file with key inside it. If not provided script genera options_help[o]="output_file:Name of the final output file. default to $OUTPUT" options_help[c]="core_id:target core id on which the image would be running. Default to $BOOTCORE" options_help[l]="loadaddr: Target load address of the binary in hex. Default to $LOADADDR" +options_help[d]="debug_type: Debug type, set to 4 to enable early JTAG. Default to $DEBUG_TYPE" -while getopts "b:k:o:c:l:h" opt +while getopts "b:k:o:c:l:d:h" opt do case $opt in b)@@ -170,6 +172,9 @@ do c) BOOTCORE=$OPTARG ;; + d) + DEBUG_TYPE=$OPTARG + ;; h) usage exit 0@@ -224,12 +229,15 @@ gen_cert() { #echo " LOADADDR = 0x$ADDR" #echo " IMAGE_SIZE = $BIN_SIZE" #echo " CERT_TYPE = $CERTTYPE" + #echo " DEBUG_TYPE = $DEBUG_TYPE" sed -e "s/TEST_IMAGE_LENGTH/$BIN_SIZE/" \ -e "s/TEST_IMAGE_SHA_VAL/$SHA_VAL/" \ -e "s/TEST_CERT_TYPE/$CERTTYPE/" \ -e "s/TEST_BOOT_CORE_OPTS/$BOOTCORE_OPTS/" \ -e "s/TEST_BOOT_CORE/$BOOTCORE/" \ - -e "s/TEST_BOOT_ADDR/$ADDR/" x509-template.txt > $TEMP_X509 + -e "s/TEST_BOOT_ADDR/$ADDR/" \ + -e "s/TEST_DEBUG_TYPE/$DEBUG_TYPE/" \ + x509-template.txt > $TEMP_X509 openssl req -new -x509 -key $KEY -nodes -outform DER -out $CERT -config $TEMP_X509 -sha512 }
PATCH 1/1 tools: k3_gen_x509_cert: Allow selecting early JTAG debug value
Quoted 18 lines · Andrew F. Davis
Quoted 7 lines · Lokesh Vutla
Quoted 4 lines · Andrew F. Davis
When authenticating the initial boot binary the ROM will check a debug type value in the certificate and based on that open JTAG access to that core.
Quoted 8 lines
Quoted 3 lines
The default is currently full access, on HS this is useful for early developers, but should not be the default as to prevent end system integrators from unintentionally leaving this open.
Won't JTAG access is useful for early developers. UART as well not available at this point. What we offer out of the box is not a production ready secure system. I would prefer to have it enabled by default.
Quoted 7 lines
Who are these early developers? Pre-SYSFW on HS is a harsh environment, firewalls and other pitfalls limit one to only what is needed to get SYSFW loaded. Only a handful of folks will ever touch the source this early, and they will be using a GP device for that development, in which case debug is enabled, even with this change.
I'd guess I'm the only developer touching code this early on HS, I say
For how long you are guaranteeing that? This cannot be an assumption for making default options.
Quoted 6 lines
this as so far I'm the only one who has noticed that there is a ROM issue that makes early debug on HS almost unusable.
Accidentally leaving this open completely defeats the chain of trust, I guarantee some production system will do this if we leave JTAG open by default, it happens all the time.
Did you audit all other default options?
Quoted 4 lines
So debug doesn't work here anyway, no one uses it and those who do can flip this bit with the command line flag, and leaving it on will lead to a huge security issue for one of our customers.
Then please split this change into two patches.
1- adding a command line option.
2- changing the default options with reasons clearly mentioned in the commit description.
Thanks and regards,
Lokesh