Skip to contentSkip to conversation

target/arm: Restrict TCG cpus to TCG accel

PATCH Applied Philippe Mathieu-Daudé 2 participants 8 messages Apr 23, 2020 – Apr 27, 2020

v2 of 3 Applied Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover target/arm: Restrict TCG cpus to TCG accel

These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.html

The other patches are blocked by the "accel: Allow targets to use Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.html

All patches reviewed.

Since v1:
- Dropped 'Make set_feature() available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.html

Many thanks to Richard Henderson for his patience!

Regards,

Phil.

Philippe Mathieu-Daudé (4):
target/arm: Restric the Address Translate write operation to TCG accel target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] target/arm/cpu: Update coding style to make checkpatch.pl happy target/arm: Restrict TCG cpus to TCG accel

Thomas Huth (1):
target/arm: Make cpu_register() available for other files

 target/arm/cpu-qom.h     |   9 +-
 target/arm/cpu.c         | 647 +-------------------------------------
 target/arm/cpu64.c       |  16 +-
 target/arm/cpu_tcg.c     | 664 +++++++++++++++++++++++++++++++++++++++
 target/arm/helper.c      |  17 +
 target/arm/Makefile.objs |   1 +
 6 files changed, 698 insertions(+), 656 deletions(-)
 create mode 100644 target/arm/cpu_tcg.c
Signature · 1 line
2.21.1
#1 lore raw

PATCH v2 1/5 target/arm: Restric the Address Translate write operation to TCG accel

Under KVM these registers are written by the hardware. Restrict the writefn handlers to TCG to avoid when building without TCG:

LINK aarch64-softmmu/qemu-system-aarch64
target/arm/helper.o: In function `do_ats_write':
target/arm/helper.c:3524: undefined reference to `raise_exception'

---
 target/arm/helper.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
target/arm/helper.c +17 -0
index 7e9ea5d20f..dfefb9b3d9 100644
@@ -3442,6 +3442,7 @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri,
     return CP_ACCESS_OK;
 }
 
+#ifdef CONFIG_TCG
 static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
                              MMUAccessType access_type, ARMMMUIdx mmu_idx)
 {
@@ -3602,9 +3603,11 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
     }
     return par64;
 }
+#endif /* CONFIG_TCG */
 
 static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
 {
+#ifdef CONFIG_TCG
     MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
     uint64_t par64;
     ARMMMUIdx mmu_idx;
@@ -3664,17 +3667,26 @@ static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
     par64 = do_ats_write(env, value, access_type, mmu_idx);
 
     A32_BANKED_CURRENT_REG_SET(env, par, par64);
+#else
+    /* Handled by hardware accelerator. */
+    g_assert_not_reached();
+#endif /* CONFIG_TCG */
 }
 
 static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
+#ifdef CONFIG_TCG
     MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
     uint64_t par64;
 
     par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2);
 
     A32_BANKED_CURRENT_REG_SET(env, par, par64);
+#else
+    /* Handled by hardware accelerator. */
+    g_assert_not_reached();
+#endif /* CONFIG_TCG */
 }
 
 static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -3689,6 +3701,7 @@ static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri,
 static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
                         uint64_t value)
 {
+#ifdef CONFIG_TCG
     MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD;
     ARMMMUIdx mmu_idx;
     int secure = arm_is_secure_below_el3(env);
@@ -3728,6 +3741,10 @@ static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
     }
 
     env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx);
+#else
+    /* Handled by hardware accelerator. */
+    g_assert_not_reached();
+#endif /* CONFIG_TCG */
 }
 #endif
 
Signature · 1 line
2.21.1
#2 lore raw

PATCH v2 2/5 target/arm: Make cpu_register() available for other files

In reply to Philippe Mathieu-Daudé

From: Thomas Huth <[email protected]>

Make cpu_register() (renamed to arm_cpu_register()) available from internals.h so we can register CPUs also from other files in the future.

Message-ID: <[email protected]>

[PMD: Only take cpu_register() from Thomas's patch]
---
 target/arm/cpu-qom.h |  9 ++++++++-
 target/arm/cpu.c     | 10 ++--------
 target/arm/cpu64.c   |  8 +-------
 3 files changed, 11 insertions(+), 16 deletions(-)
target/arm/cpu-qom.h +8 -1
index d95568bf05..56395b87f6 100644
@@ -35,7 +35,14 @@ struct arm_boot_info;
 
 #define TYPE_ARM_MAX_CPU "max-" TYPE_ARM_CPU
 
-typedef struct ARMCPUInfo ARMCPUInfo;
+typedef struct ARMCPUInfo {
+    const char *name;
+    void (*initfn)(Object *obj);
+    void (*class_init)(ObjectClass *oc, void *data);
+} ARMCPUInfo;
+
+void arm_cpu_register(const ARMCPUInfo *info);
+void aarch64_cpu_register(const ARMCPUInfo *info);
 
 /**
  * ARMCPUClass:
target/arm/cpu.c +2 -8
index a79f233b17..47e35400da 100644
@@ -2693,12 +2693,6 @@ static void arm_max_initfn(Object *obj)
 
 #endif /* !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) */
 
-struct ARMCPUInfo {
-    const char *name;
-    void (*initfn)(Object *obj);
-    void (*class_init)(ObjectClass *oc, void *data);
-};
-
 static const ARMCPUInfo arm_cpus[] = {
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
     { .name = "arm926",      .initfn = arm926_initfn },
@@ -2864,7 +2858,7 @@ static void cpu_register_class_init(ObjectClass *oc, void *data)
     acc->info = data;
 }
 
-static void cpu_register(const ARMCPUInfo *info)
+void arm_cpu_register(const ARMCPUInfo *info)
 {
     TypeInfo type_info = {
         .parent = TYPE_ARM_CPU,
@@ -2905,7 +2899,7 @@ static void arm_cpu_register_types(void)
     type_register_static(&idau_interface_type_info);
 
     while (info->name) {
-        cpu_register(info);
+        arm_cpu_register(info);
         info++;
     }
 
target/arm/cpu64.c +1 -7
index 62d36f9e8d..951588c56e 100644
@@ -737,12 +737,6 @@ static void aarch64_max_initfn(Object *obj)
                         cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
 }
 
-struct ARMCPUInfo {
-    const char *name;
-    void (*initfn)(Object *obj);
-    void (*class_init)(ObjectClass *oc, void *data);
-};
-
 static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a57",         .initfn = aarch64_a57_initfn },
     { .name = "cortex-a53",         .initfn = aarch64_a53_initfn },
@@ -825,7 +819,7 @@ static void cpu_register_class_init(ObjectClass *oc, void *data)
     acc->info = data;
 }
 
-static void aarch64_cpu_register(const ARMCPUInfo *info)
+void aarch64_cpu_register(const ARMCPUInfo *info)
 {
     TypeInfo type_info = {
         .parent = TYPE_AARCH64_CPU,
Signature · 1 line
2.21.1
#3 lore raw

PATCH v2 3/5 target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[]

In reply to Philippe Mathieu-Daudé
---
 target/arm/cpu.c   | 8 +++-----
 target/arm/cpu64.c | 8 +++-----
 2 files changed, 6 insertions(+), 10 deletions(-)
target/arm/cpu.c +3 -5
index 47e35400da..30e961f775 100644
@@ -2745,7 +2745,6 @@ static const ARMCPUInfo arm_cpus[] = {
     { .name = "any",         .initfn = arm_max_initfn },
 #endif
 #endif
-    { .name = NULL }
 };
 
 static Property arm_cpu_properties[] = {
@@ -2893,14 +2892,13 @@ static const TypeInfo idau_interface_type_info = {
 
 static void arm_cpu_register_types(void)
 {
-    const ARMCPUInfo *info = arm_cpus;
+    size_t i;
 
     type_register_static(&arm_cpu_type_info);
     type_register_static(&idau_interface_type_info);
 
-    while (info->name) {
-        arm_cpu_register(info);
-        info++;
+    for (i = 0; i < ARRAY_SIZE(arm_cpus); ++i) {
+        arm_cpu_register(&arm_cpus[i]);
     }
 
 #ifdef CONFIG_KVM
target/arm/cpu64.c +3 -5
index 951588c56e..ef9231d55b 100644
@@ -742,7 +742,6 @@ static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a53",         .initfn = aarch64_a53_initfn },
     { .name = "cortex-a72",         .initfn = aarch64_a72_initfn },
     { .name = "max",                .initfn = aarch64_max_initfn },
-    { .name = NULL }
 };
 
 static bool aarch64_cpu_get_aarch64(Object *obj, Error **errp)
@@ -848,13 +847,12 @@ static const TypeInfo aarch64_cpu_type_info = {
 
 static void aarch64_cpu_register_types(void)
 {
-    const ARMCPUInfo *info = aarch64_cpus;
+    size_t i;
 
     type_register_static(&aarch64_cpu_type_info);
 
-    while (info->name) {
-        aarch64_cpu_register(info);
-        info++;
+    for (i = 0; i < ARRAY_SIZE(aarch64_cpus); ++i) {
+        aarch64_cpu_register(&aarch64_cpus[i]);
     }
 }
 
Signature · 1 line
2.21.1
#4 lore raw

PATCH v2 4/5 target/arm/cpu: Update coding style to make checkpatch.pl happy

In reply to Philippe Mathieu-Daudé

We will move this code in the next commit. Clean it up first to avoid checkpatch.pl errors.

---
 target/arm/cpu.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
target/arm/cpu.c +6 -3
index 30e961f775..a1e38b38ba 100644
@@ -582,7 +582,8 @@ static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
     CPUARMState *env = &cpu->env;
     bool ret = false;
 
-    /* ARMv7-M interrupt masking works differently than -A or -R.
+    /*
+     * ARMv7-M interrupt masking works differently than -A or -R.
      * There is no FIQ/IRQ distinction. Instead of I and F bits
      * masking FIQ and IRQ interrupts, an exception is taken only
      * if it is higher priority than the current execution priority
@@ -1912,7 +1913,8 @@ static void arm1026_initfn(Object *obj)
 static void arm1136_r2_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
-    /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
+    /*
+     * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
      * older core than plain "arm1136". In particular this does not
      * have the v6K features.
      * These ID register values are correct for 1136 but may be wrong
@@ -2698,7 +2700,8 @@ static const ARMCPUInfo arm_cpus[] = {
     { .name = "arm926",      .initfn = arm926_initfn },
     { .name = "arm946",      .initfn = arm946_initfn },
     { .name = "arm1026",     .initfn = arm1026_initfn },
-    /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
+    /*
+     * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
      * older core than plain "arm1136". In particular this does not
      * have the v6K features.
      */
Signature · 1 line
2.21.1
#5 lore raw

PATCH v2 5/5 target/arm: Restrict TCG cpus to TCG accel

In reply to Philippe Mathieu-Daudé

A KVM-only build won't be able to run TCG cpus.

---
 target/arm/cpu.c         | 634 -------------------------------------
 target/arm/cpu_tcg.c     | 664 +++++++++++++++++++++++++++++++++++++++
 target/arm/Makefile.objs |   1 +
 3 files changed, 665 insertions(+), 634 deletions(-)
 create mode 100644 target/arm/cpu_tcg.c
target/arm/cpu.c +0 -634
index a1e38b38ba..fed9ccf6d5 100644
@@ -574,32 +574,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
     return true;
 }
 
-#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
-{
-    CPUClass *cc = CPU_GET_CLASS(cs);
-    ARMCPU *cpu = ARM_CPU(cs);
-    CPUARMState *env = &cpu->env;
-    bool ret = false;
-
-    /*
-     * ARMv7-M interrupt masking works differently than -A or -R.
-     * There is no FIQ/IRQ distinction. Instead of I and F bits
-     * masking FIQ and IRQ interrupts, an exception is taken only
-     * if it is higher priority than the current execution priority
-     * (which depends on state like BASEPRI, FAULTMASK and the
-     * currently active exception).
-     */
-    if (interrupt_request & CPU_INTERRUPT_HARD
-        && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
-        cs->exception_index = EXCP_IRQ;
-        cc->do_interrupt(cs);
-        ret = true;
-    }
-    return ret;
-}
-#endif
-
 void arm_cpu_update_virq(ARMCPU *cpu)
 {
     /*
@@ -1830,406 +1804,6 @@ static ObjectClass *arm_cpu_class_by_name(const char *cpu_model)
 /* CPU models. These are not needed for the AArch64 linux-user build. */
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
 
-static void arm926_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm926";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
-    cpu->midr = 0x41069265;
-    cpu->reset_fpsid = 0x41011090;
-    cpu->ctr = 0x1dd20d2;
-    cpu->reset_sctlr = 0x00090078;
-
-    /*
-     * ARMv5 does not have the ID_ISAR registers, but we can still
-     * set the field to indicate Jazelle support within QEMU.
-     */
-    cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
-    /*
-     * Similarly, we need to set MVFR0 fields to enable vfp and short vector
-     * support even though ARMv5 doesn't have this register.
-     */
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
-}
-
-static void arm946_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm946";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_PMSA);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    cpu->midr = 0x41059461;
-    cpu->ctr = 0x0f004006;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void arm1026_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm1026";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_AUXCR);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
-    cpu->midr = 0x4106a262;
-    cpu->reset_fpsid = 0x410110a0;
-    cpu->ctr = 0x1dd20d2;
-    cpu->reset_sctlr = 0x00090078;
-    cpu->reset_auxcr = 1;
-
-    /*
-     * ARMv5 does not have the ID_ISAR registers, but we can still
-     * set the field to indicate Jazelle support within QEMU.
-     */
-    cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
-    /*
-     * Similarly, we need to set MVFR0 fields to enable vfp and short vector
-     * support even though ARMv5 doesn't have this register.
-     */
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
-    cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
-
-    {
-        /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */
-        ARMCPRegInfo ifar = {
-            .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
-            .access = PL1_RW,
-            .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns),
-            .resetvalue = 0
-        };
-        define_one_arm_cp_reg(cpu, &ifar);
-    }
-}
-
-static void arm1136_r2_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-    /*
-     * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
-     * older core than plain "arm1136". In particular this does not
-     * have the v6K features.
-     * These ID register values are correct for 1136 but may be wrong
-     * for 1136_r2 (in particular r0p2 does not actually implement most
-     * of the ID registers).
-     */
-
-    cpu->dtb_compatible = "arm,arm1136";
-    set_feature(&cpu->env, ARM_FEATURE_V6);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
-    cpu->midr = 0x4107b362;
-    cpu->reset_fpsid = 0x410120b4;
-    cpu->isar.mvfr0 = 0x11111111;
-    cpu->isar.mvfr1 = 0x00000000;
-    cpu->ctr = 0x1dd20d2;
-    cpu->reset_sctlr = 0x00050078;
-    cpu->id_pfr0 = 0x111;
-    cpu->id_pfr1 = 0x1;
-    cpu->isar.id_dfr0 = 0x2;
-    cpu->id_afr0 = 0x3;
-    cpu->isar.id_mmfr0 = 0x01130003;
-    cpu->isar.id_mmfr1 = 0x10030302;
-    cpu->isar.id_mmfr2 = 0x01222110;
-    cpu->isar.id_isar0 = 0x00140011;
-    cpu->isar.id_isar1 = 0x12002111;
-    cpu->isar.id_isar2 = 0x11231111;
-    cpu->isar.id_isar3 = 0x01102131;
-    cpu->isar.id_isar4 = 0x141;
-    cpu->reset_auxcr = 7;
-}
-
-static void arm1136_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm1136";
-    set_feature(&cpu->env, ARM_FEATURE_V6K);
-    set_feature(&cpu->env, ARM_FEATURE_V6);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
-    cpu->midr = 0x4117b363;
-    cpu->reset_fpsid = 0x410120b4;
-    cpu->isar.mvfr0 = 0x11111111;
-    cpu->isar.mvfr1 = 0x00000000;
-    cpu->ctr = 0x1dd20d2;
-    cpu->reset_sctlr = 0x00050078;
-    cpu->id_pfr0 = 0x111;
-    cpu->id_pfr1 = 0x1;
-    cpu->isar.id_dfr0 = 0x2;
-    cpu->id_afr0 = 0x3;
-    cpu->isar.id_mmfr0 = 0x01130003;
-    cpu->isar.id_mmfr1 = 0x10030302;
-    cpu->isar.id_mmfr2 = 0x01222110;
-    cpu->isar.id_isar0 = 0x00140011;
-    cpu->isar.id_isar1 = 0x12002111;
-    cpu->isar.id_isar2 = 0x11231111;
-    cpu->isar.id_isar3 = 0x01102131;
-    cpu->isar.id_isar4 = 0x141;
-    cpu->reset_auxcr = 7;
-}
-
-static void arm1176_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm1176";
-    set_feature(&cpu->env, ARM_FEATURE_V6K);
-    set_feature(&cpu->env, ARM_FEATURE_VAPA);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
-    set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
-    set_feature(&cpu->env, ARM_FEATURE_EL3);
-    cpu->midr = 0x410fb767;
-    cpu->reset_fpsid = 0x410120b5;
-    cpu->isar.mvfr0 = 0x11111111;
-    cpu->isar.mvfr1 = 0x00000000;
-    cpu->ctr = 0x1dd20d2;
-    cpu->reset_sctlr = 0x00050078;
-    cpu->id_pfr0 = 0x111;
-    cpu->id_pfr1 = 0x11;
-    cpu->isar.id_dfr0 = 0x33;
-    cpu->id_afr0 = 0;
-    cpu->isar.id_mmfr0 = 0x01130003;
-    cpu->isar.id_mmfr1 = 0x10030302;
-    cpu->isar.id_mmfr2 = 0x01222100;
-    cpu->isar.id_isar0 = 0x0140011;
-    cpu->isar.id_isar1 = 0x12002111;
-    cpu->isar.id_isar2 = 0x11231121;
-    cpu->isar.id_isar3 = 0x01102131;
-    cpu->isar.id_isar4 = 0x01141;
-    cpu->reset_auxcr = 7;
-}
-
-static void arm11mpcore_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "arm,arm11mpcore";
-    set_feature(&cpu->env, ARM_FEATURE_V6K);
-    set_feature(&cpu->env, ARM_FEATURE_VAPA);
-    set_feature(&cpu->env, ARM_FEATURE_MPIDR);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    cpu->midr = 0x410fb022;
-    cpu->reset_fpsid = 0x410120b4;
-    cpu->isar.mvfr0 = 0x11111111;
-    cpu->isar.mvfr1 = 0x00000000;
-    cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */
-    cpu->id_pfr0 = 0x111;
-    cpu->id_pfr1 = 0x1;
-    cpu->isar.id_dfr0 = 0;
-    cpu->id_afr0 = 0x2;
-    cpu->isar.id_mmfr0 = 0x01100103;
-    cpu->isar.id_mmfr1 = 0x10020302;
-    cpu->isar.id_mmfr2 = 0x01222000;
-    cpu->isar.id_isar0 = 0x00100011;
-    cpu->isar.id_isar1 = 0x12002111;
-    cpu->isar.id_isar2 = 0x11221011;
-    cpu->isar.id_isar3 = 0x01102131;
-    cpu->isar.id_isar4 = 0x141;
-    cpu->reset_auxcr = 1;
-}
-
-static void cortex_m0_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-    set_feature(&cpu->env, ARM_FEATURE_V6);
-    set_feature(&cpu->env, ARM_FEATURE_M);
-
-    cpu->midr = 0x410cc200;
-}
-
-static void cortex_m3_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-    set_feature(&cpu->env, ARM_FEATURE_V7);
-    set_feature(&cpu->env, ARM_FEATURE_M);
-    set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
-    cpu->midr = 0x410fc231;
-    cpu->pmsav7_dregion = 8;
-    cpu->id_pfr0 = 0x00000030;
-    cpu->id_pfr1 = 0x00000200;
-    cpu->isar.id_dfr0 = 0x00100000;
-    cpu->id_afr0 = 0x00000000;
-    cpu->isar.id_mmfr0 = 0x00000030;
-    cpu->isar.id_mmfr1 = 0x00000000;
-    cpu->isar.id_mmfr2 = 0x00000000;
-    cpu->isar.id_mmfr3 = 0x00000000;
-    cpu->isar.id_isar0 = 0x01141110;
-    cpu->isar.id_isar1 = 0x02111000;
-    cpu->isar.id_isar2 = 0x21112231;
-    cpu->isar.id_isar3 = 0x01111110;
-    cpu->isar.id_isar4 = 0x01310102;
-    cpu->isar.id_isar5 = 0x00000000;
-    cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m4_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    set_feature(&cpu->env, ARM_FEATURE_V7);
-    set_feature(&cpu->env, ARM_FEATURE_M);
-    set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
-    set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
-    cpu->midr = 0x410fc240; /* r0p0 */
-    cpu->pmsav7_dregion = 8;
-    cpu->isar.mvfr0 = 0x10110021;
-    cpu->isar.mvfr1 = 0x11000011;
-    cpu->isar.mvfr2 = 0x00000000;
-    cpu->id_pfr0 = 0x00000030;
-    cpu->id_pfr1 = 0x00000200;
-    cpu->isar.id_dfr0 = 0x00100000;
-    cpu->id_afr0 = 0x00000000;
-    cpu->isar.id_mmfr0 = 0x00000030;
-    cpu->isar.id_mmfr1 = 0x00000000;
-    cpu->isar.id_mmfr2 = 0x00000000;
-    cpu->isar.id_mmfr3 = 0x00000000;
-    cpu->isar.id_isar0 = 0x01141110;
-    cpu->isar.id_isar1 = 0x02111000;
-    cpu->isar.id_isar2 = 0x21112231;
-    cpu->isar.id_isar3 = 0x01111110;
-    cpu->isar.id_isar4 = 0x01310102;
-    cpu->isar.id_isar5 = 0x00000000;
-    cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m7_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    set_feature(&cpu->env, ARM_FEATURE_V7);
-    set_feature(&cpu->env, ARM_FEATURE_M);
-    set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
-    set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
-    cpu->midr = 0x411fc272; /* r1p2 */
-    cpu->pmsav7_dregion = 8;
-    cpu->isar.mvfr0 = 0x10110221;
-    cpu->isar.mvfr1 = 0x12000011;
-    cpu->isar.mvfr2 = 0x00000040;
-    cpu->id_pfr0 = 0x00000030;
-    cpu->id_pfr1 = 0x00000200;
-    cpu->isar.id_dfr0 = 0x00100000;
-    cpu->id_afr0 = 0x00000000;
-    cpu->isar.id_mmfr0 = 0x00100030;
-    cpu->isar.id_mmfr1 = 0x00000000;
-    cpu->isar.id_mmfr2 = 0x01000000;
-    cpu->isar.id_mmfr3 = 0x00000000;
-    cpu->isar.id_isar0 = 0x01101110;
-    cpu->isar.id_isar1 = 0x02112000;
-    cpu->isar.id_isar2 = 0x20232231;
-    cpu->isar.id_isar3 = 0x01111131;
-    cpu->isar.id_isar4 = 0x01310132;
-    cpu->isar.id_isar5 = 0x00000000;
-    cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m33_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    set_feature(&cpu->env, ARM_FEATURE_V8);
-    set_feature(&cpu->env, ARM_FEATURE_M);
-    set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
-    set_feature(&cpu->env, ARM_FEATURE_M_SECURITY);
-    set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
-    cpu->midr = 0x410fd213; /* r0p3 */
-    cpu->pmsav7_dregion = 16;
-    cpu->sau_sregion = 8;
-    cpu->isar.mvfr0 = 0x10110021;
-    cpu->isar.mvfr1 = 0x11000011;
-    cpu->isar.mvfr2 = 0x00000040;
-    cpu->id_pfr0 = 0x00000030;
-    cpu->id_pfr1 = 0x00000210;
-    cpu->isar.id_dfr0 = 0x00200000;
-    cpu->id_afr0 = 0x00000000;
-    cpu->isar.id_mmfr0 = 0x00101F40;
-    cpu->isar.id_mmfr1 = 0x00000000;
-    cpu->isar.id_mmfr2 = 0x01000000;
-    cpu->isar.id_mmfr3 = 0x00000000;
-    cpu->isar.id_isar0 = 0x01101110;
-    cpu->isar.id_isar1 = 0x02212000;
-    cpu->isar.id_isar2 = 0x20232232;
-    cpu->isar.id_isar3 = 0x01111131;
-    cpu->isar.id_isar4 = 0x01310132;
-    cpu->isar.id_isar5 = 0x00000000;
-    cpu->isar.id_isar6 = 0x00000000;
-    cpu->clidr = 0x00000000;
-    cpu->ctr = 0x8000c000;
-}
-
-static void arm_v7m_class_init(ObjectClass *oc, void *data)
-{
-    ARMCPUClass *acc = ARM_CPU_CLASS(oc);
-    CPUClass *cc = CPU_CLASS(oc);
-
-    acc->info = data;
-#ifndef CONFIG_USER_ONLY
-    cc->do_interrupt = arm_v7m_cpu_do_interrupt;
-#endif
-
-    cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
-}
-
-static const ARMCPRegInfo cortexr5_cp_reginfo[] = {
-    /* Dummy the TCM region regs for the moment */
-    { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
-      .access = PL1_RW, .type = ARM_CP_CONST },
-    { .name = "BTCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
-      .access = PL1_RW, .type = ARM_CP_CONST },
-    { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5,
-      .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP },
-    REGINFO_SENTINEL
-};
-
-static void cortex_r5_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    set_feature(&cpu->env, ARM_FEATURE_V7);
-    set_feature(&cpu->env, ARM_FEATURE_V7MP);
-    set_feature(&cpu->env, ARM_FEATURE_PMSA);
-    set_feature(&cpu->env, ARM_FEATURE_PMU);
-    cpu->midr = 0x411fc153; /* r1p3 */
-    cpu->id_pfr0 = 0x0131;
-    cpu->id_pfr1 = 0x001;
-    cpu->isar.id_dfr0 = 0x010400;
-    cpu->id_afr0 = 0x0;
-    cpu->isar.id_mmfr0 = 0x0210030;
-    cpu->isar.id_mmfr1 = 0x00000000;
-    cpu->isar.id_mmfr2 = 0x01200000;
-    cpu->isar.id_mmfr3 = 0x0211;
-    cpu->isar.id_isar0 = 0x02101111;
-    cpu->isar.id_isar1 = 0x13112111;
-    cpu->isar.id_isar2 = 0x21232141;
-    cpu->isar.id_isar3 = 0x01112131;
-    cpu->isar.id_isar4 = 0x0010142;
-    cpu->isar.id_isar5 = 0x0;
-    cpu->isar.id_isar6 = 0x0;
-    cpu->mp_is_up = true;
-    cpu->pmsav7_dregion = 16;
-    define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
-}
-
-static void cortex_r5f_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cortex_r5_initfn(obj);
-    cpu->isar.mvfr0 = 0x10110221;
-    cpu->isar.mvfr1 = 0x00000011;
-}
-
 static const ARMCPRegInfo cortexa8_cp_reginfo[] = {
     { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0,
       .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
@@ -2456,174 +2030,6 @@ static void cortex_a15_initfn(Object *obj)
     define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
 }
 
-static void ti925t_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-    set_feature(&cpu->env, ARM_FEATURE_V4T);
-    set_feature(&cpu->env, ARM_FEATURE_OMAPCP);
-    cpu->midr = ARM_CPUID_TI925T;
-    cpu->ctr = 0x5109149;
-    cpu->reset_sctlr = 0x00000070;
-}
-
-static void sa1100_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "intel,sa1100";
-    set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    cpu->midr = 0x4401A11B;
-    cpu->reset_sctlr = 0x00000070;
-}
-
-static void sa1110_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-    set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
-    set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
-    cpu->midr = 0x6901B119;
-    cpu->reset_sctlr = 0x00000070;
-}
-
-static void pxa250_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    cpu->midr = 0x69052100;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa255_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    cpu->midr = 0x69052d00;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa260_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    cpu->midr = 0x69052903;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa261_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    cpu->midr = 0x69052d05;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa262_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    cpu->midr = 0x69052d06;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270a0_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054110;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270a1_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054111;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270b0_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054112;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270b1_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054113;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270c0_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054114;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270c5_initfn(Object *obj)
-{
-    ARMCPU *cpu = ARM_CPU(obj);
-
-    cpu->dtb_compatible = "marvell,xscale";
-    set_feature(&cpu->env, ARM_FEATURE_V5);
-    set_feature(&cpu->env, ARM_FEATURE_XSCALE);
-    set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
-    cpu->midr = 0x69054117;
-    cpu->ctr = 0xd172172;
-    cpu->reset_sctlr = 0x00000078;
-}
-
 #ifndef TARGET_AARCH64
 /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
  * otherwise, a CPU with as many features enabled as our emulation supports.
@@ -2697,50 +2103,10 @@ static void arm_max_initfn(Object *obj)
 
 static const ARMCPUInfo arm_cpus[] = {
 #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-    { .name = "arm926",      .initfn = arm926_initfn },
-    { .name = "arm946",      .initfn = arm946_initfn },
-    { .name = "arm1026",     .initfn = arm1026_initfn },
-    /*
-     * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
-     * older core than plain "arm1136". In particular this does not
-     * have the v6K features.
-     */
-    { .name = "arm1136-r2",  .initfn = arm1136_r2_initfn },
-    { .name = "arm1136",     .initfn = arm1136_initfn },
-    { .name = "arm1176",     .initfn = arm1176_initfn },
-    { .name = "arm11mpcore", .initfn = arm11mpcore_initfn },
-    { .name = "cortex-m0",   .initfn = cortex_m0_initfn,
-                             .class_init = arm_v7m_class_init },
-    { .name = "cortex-m3",   .initfn = cortex_m3_initfn,
-                             .class_init = arm_v7m_class_init },
-    { .name = "cortex-m4",   .initfn = cortex_m4_initfn,
-                             .class_init = arm_v7m_class_init },
-    { .name = "cortex-m7",   .initfn = cortex_m7_initfn,
-                             .class_init = arm_v7m_class_init },
-    { .name = "cortex-m33",  .initfn = cortex_m33_initfn,
-                             .class_init = arm_v7m_class_init },
-    { .name = "cortex-r5",   .initfn = cortex_r5_initfn },
-    { .name = "cortex-r5f",  .initfn = cortex_r5f_initfn },
     { .name = "cortex-a7",   .initfn = cortex_a7_initfn },
     { .name = "cortex-a8",   .initfn = cortex_a8_initfn },
     { .name = "cortex-a9",   .initfn = cortex_a9_initfn },
     { .name = "cortex-a15",  .initfn = cortex_a15_initfn },
-    { .name = "ti925t",      .initfn = ti925t_initfn },
-    { .name = "sa1100",      .initfn = sa1100_initfn },
-    { .name = "sa1110",      .initfn = sa1110_initfn },
-    { .name = "pxa250",      .initfn = pxa250_initfn },
-    { .name = "pxa255",      .initfn = pxa255_initfn },
-    { .name = "pxa260",      .initfn = pxa260_initfn },
-    { .name = "pxa261",      .initfn = pxa261_initfn },
-    { .name = "pxa262",      .initfn = pxa262_initfn },
-    /* "pxa270" is an alias for "pxa270-a0" */
-    { .name = "pxa270",      .initfn = pxa270a0_initfn },
-    { .name = "pxa270-a0",   .initfn = pxa270a0_initfn },
-    { .name = "pxa270-a1",   .initfn = pxa270a1_initfn },
-    { .name = "pxa270-b0",   .initfn = pxa270b0_initfn },
-    { .name = "pxa270-b1",   .initfn = pxa270b1_initfn },
-    { .name = "pxa270-c0",   .initfn = pxa270c0_initfn },
-    { .name = "pxa270-c5",   .initfn = pxa270c5_initfn },
 #ifndef TARGET_AARCH64
     { .name = "max",         .initfn = arm_max_initfn },
 #endif
target/arm/cpu_tcg.c new file +664 -0

664 lines not on this page · raw message

target/arm/Makefile.objs +1 -0
index cf26c16f5f..212b588afd 100644
@@ -61,6 +61,7 @@ obj-y += translate.o op_helper.o
 obj-y += crypto_helper.o
 obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
 obj-y += m_helper.o
+obj-y += cpu_tcg.o
 
 obj-$(CONFIG_SOFTMMU) += psci.o
 
Signature · 1 line
2.21.1
#6 lore raw
In reply to Philippe Mathieu-Daudé
Quoted 22 lines · Philippe Mathieu-Daudé

These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.html

The other patches are blocked by the "accel: Allow targets to use Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.html

All patches reviewed.

Since v1:
- Dropped 'Make set_feature() available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.html

Many thanks to Richard Henderson for his patience!

Regards,

Phil.

Quoted 8 lines

Philippe Mathieu-Daudé (4):
target/arm: Restric the Address Translate write operation to TCG accel target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] target/arm/cpu: Update coding style to make checkpatch.pl happy target/arm: Restrict TCG cpus to TCG accel

Thomas Huth (1):
target/arm: Make cpu_register() available for other files

Patch 5 doesn't compile, because it moves code out from cpu.c to cpu_tcg.c, where it no longer has access to the file-local set_feature() function:

CC arm-softmmu/target/arm/cpu_tcg.o
/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:47:5:
error: implicit declaration of function 'set_feature' is invalid in C99

      [-Werror,-Wimplicit-function-declaration]
    set_feature(&cpu->env, ARM_FEATURE_V5);
    ^

/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:47:5:
note: did you mean 'arm_feature'? /home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu.h:1940:19:
note: 'arm_feature' declared here
static inline int arm_feature(CPUARMState *env, int feature)

                  ^
/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:47:5:
error: this function declaration is not a prototype
[-Werror,-Wstrict-prototypes]
    set_feature(&cpu->env, ARM_FEATURE_V5);
    ^
/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:74:5:
error: implicit declaration of function 'set_feature' is invalid in
C99
      [-Werror,-Wimplicit-function-declaration]
    set_feature(&cpu->env, ARM_FEATURE_V5);
    ^
/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:87:5:
error: implicit declaration of function 'set_feature' is invalid in
C99
      [-Werror,-Wimplicit-function-declaration]
    set_feature(&cpu->env, ARM_FEATURE_V5);
    ^

[etc]

I've applied patches 1-4 to target-arm.next.

thanks
-- PMM

#7 lore raw
Quoted 37 lines · Peter Maydell
Quoted 22 lines · Philippe Mathieu-Daudé

These are the uncontroversial patches from "Support disabling TCG on ARM (part 2)"
https://www.mail-archive.com/[email protected]/msg689168.html

The other patches are blocked by the "accel: Allow targets to use Kconfig" series:
https://www.mail-archive.com/[email protected]/msg689024.html

All patches reviewed.

Since v1:
- Dropped 'Make set_feature() available for other files' patch which fails to build with KVM only, see:
https://lists.gnu.org/archive/html/qemu-devel/2020-04/msg03843.html

Many thanks to Richard Henderson for his patience!

Regards,

Phil.

Quoted 8 lines

Philippe Mathieu-Daudé (4):
target/arm: Restric the Address Translate write operation to TCG accel target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] target/arm/cpu: Update coding style to make checkpatch.pl happy target/arm: Restrict TCG cpus to TCG accel

Thomas Huth (1):
target/arm: Make cpu_register() available for other files

Patch 5 doesn't compile, because it moves code out from cpu.c to cpu_tcg.c, where it no longer has access to the file-local set_feature() function:

Quoted 8 lines

CC arm-softmmu/target/arm/cpu_tcg.o
/home/petmay01/linaro/qemu-from-laptop/qemu/target/arm/cpu_tcg.c:47:5:
error: implicit declaration of function 'set_feature' is invalid in C99

       [-Werror,-Wimplicit-function-declaration]
     set_feature(&cpu->env, ARM_FEATURE_V5);
     ^

[etc]

*Sigh* sorry for that, I'm still unsure what's the cleaner change to deal with the different set_feature() KVM prototype:
https://www.mail-archive.com/[email protected]/msg697523.html

Quoted 2 lines

I've applied patches 1-4 to target-arm.next.

Thanks for this!

Quoted 5 lines

thanks
-- PMM