nvme: align io queue count with allocted nvme_queue in nvme_probe
PATCH v2 1/1 nvme: align io queue count with allocted nvme_queue in nvme_probe
Since the commit 147b27e4bd0 "nvme-pci: allocate device queues storage space at probe" nvme_alloc_queue will not alloc struct nvme_queue any more.
If user change write/poll_queues to larger than the number of
allocated queue in nvme_probe, nvme_alloc_queue will touch
the memory out of boundary.
This patch add nr_allocated_queues for struct nvme_dev to record how many queues alloctaed in nvme_probe, then nvme driver will not use more queues than nr_allocated_queues when user update queue count and do a controller reset.
Since global module parameter can be changed at rumtime, so it's not safe to use these two parameter directly in the following functions:nvme_dbbuf_dma_allocnvme_dbbuf_dma_freenvme_calc_irq_setsnvme_setup_io_queues
This patch also add nr_write_queues, nr_poll_queues for struct nvme_dev and io_queues_reload for struct nvme_ctrl, that allow per-controller reload module parmater when reset controller. The nvme driver will not reload module parameter(write/poll_queues) by default when reset controller. If user want to reload them, they should enable it by echo 1 > /sys/block/<nvme_disk>/device/io_queues_reload.
By now, nvme pci driver allow user change io queue count for each type(write, read, poll) within nr_allocated_queue, that's to say, if user want to change queue dynamically by reset controller, they should setup io queues as many as possiable when laod nvme module, and then tune io queue count for each type.
---
Changes since V1:
* don't use module parameter nvme_dbbuf_dma_free, nvme_dbbuf_dma_alloc and nvme_calc_irq_sets.
* add per-controller sysfs file io_queues_reload to enable/disable reload global module parameter.
drivers/nvme/host/core.c | 29 +++++++++++++++++++++ drivers/nvme/host/nvme.h | 1 + drivers/nvme/host/pci.c | 55 +++++++++++++++++++++++----------------- 3 files changed, 62 insertions(+), 23 deletions(-)
drivers/nvme/host/core.c +29 -0
@@ -3357,6 +3357,34 @@ static ssize_t nvme_sysfs_show_address(struct device *dev, } static DEVICE_ATTR(address, S_IRUGO, nvme_sysfs_show_address, NULL); +static ssize_t nvme_sysfs_io_queues_reload_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); + +return snprintf (buf,PAGE_SIZE ,"%d\n" , + ctrl->io_queues_reload ?1 :0 ); +} + +static ssize_t nvme_sysfs_io_queues_reload_store (struct device *dev, +struct device_attribute *attr,const char *buf, +size_t count) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); +bool val; + +if (kstrtobool (buf, &val)) +return -EINVAL ; + ctrl->io_queues_reload = val; + +return count; +} + +static DEVICE_ATTR(io_queues_reload, S_IRUGO | S_IWUSR, + nvme_sysfs_io_queues_reload_show, + nvme_sysfs_io_queues_reload_store); +static struct attribute *nvme_dev_attrs[] = { &dev_attr_reset_controller.attr, &dev_attr_rescan_controller.attr,
@@ -3374,6 +3402,7 @@ static struct attribute *nvme_dev_attrs[] = { &dev_attr_sqsize.attr, &dev_attr_hostnqn.attr, &dev_attr_hostid.attr, + &dev_attr_io_queues_reload.attr, NULL };
drivers/nvme/host/nvme.h +1 -0
@@ -260,6 +260,7 @@ struct nvme_ctrl {struct work_struct fw_act_work;unsigned long events;bool created; +bool io_queues_reload;#ifdef CONFIG_NVME_MULTIPATH /* asymmetric namespace access: */
drivers/nvme/host/pci.c +32 -23
121 lines not on this page · raw message
Signature · 7 lines
2.18.1 _______________________________________________ linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Quoted 25 lines · Weiping Zhang
Since the commit
147b27e4bd0"nvme-pci: allocate device queues storage space at probe"nvme_alloc_queuewill not alloc structnvme_queueany more.
If user change write/poll_queues to larger than the number of
allocated queue innvme_probe,nvme_alloc_queuewill touch
the memory out of boundary.This patch add
nr_allocated_queuesfor structnvme_devto record how many queues alloctaed innvme_probe, then nvme driver will not use more queues thannr_allocated_queueswhen user update queue count and do a controller reset.Since global module parameter can be changed at rumtime, so it's not safe to use these two parameter directly in the following functions:
nvme_dbbuf_dma_allocnvme_dbbuf_dma_freenvme_calc_irq_setsnvme_setup_io_queuesThis patch also add
nr_write_queues,nr_poll_queuesfor structnvme_devandio_queues_reloadfor structnvme_ctrl, that allow per-controller reload module parmater when reset controller. The nvme driver will not reload moduleparameter(write/poll_queues)by default when reset controller. If user want to reload them, they should enable it by echo 1 > /sys/block/<nvme_disk>/device/io_queues_reload.
Quoted 5 lines
By now, nvme pci driver allow user change io queue count for each
type(write, read, poll)withinnr_allocated_queue, that's to say, if user want to change queue dynamically by reset controller, they should setup io queues as many as possiable when laod nvme module, and then tune io queue count for each type.
typo: laod --> load
Quoted 53 lines
Signed-off-by Weiping Zhang <[email protected]>---
Changes since V1:
* don't use module parameternvme_dbbuf_dma_free,nvme_dbbuf_dma_allocandnvme_calc_irq_sets.
* add per-controller sysfs fileio_queues_reloadto enable/disable reload global module parameter.drivers/nvme/host/core.c | 29 +++++++++++++++++++++ drivers/nvme/host/nvme.h | 1 + drivers/nvme/host/pci.c | 55 +++++++++++++++++++++++----------------- 3 files changed, 62 insertions(+), 23 deletions(-)drivers/nvme/host/core.c +28
-0@@ -3357,6 +3357,34 @@ static ssize_t nvme_sysfs_show_address(struct device *dev, } static DEVICE_ATTR(address, S_IRUGO, nvme_sysfs_show_address, NULL); +static ssize_t nvme_sysfs_io_queues_reload_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); + +return snprintf (buf,PAGE_SIZE ,"%d\n" , + ctrl->io_queues_reload ?1 :0 ); +} + +static ssize_t nvme_sysfs_io_queues_reload_store (struct device *dev, +struct device_attribute *attr,const char *buf, +size_t count) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); +bool val; + +if (kstrtobool (buf, &val)) +return -EINVAL ; + ctrl->io_queues_reload = val; + +return count; +} + +static DEVICE_ATTR(io_queues_reload, S_IRUGO | S_IWUSR, + nvme_sysfs_io_queues_reload_show, + nvme_sysfs_io_queues_reload_store); +static struct attribute *nvme_dev_attrs[] = { &dev_attr_reset_controller.attr, &dev_attr_rescan_controller.attr,
drivers/nvme/host/core.c static struct attribute *nvme_dev_attrs[] = { · line 3407
Quoted 6 lines
drivers/nvme/host/core.c +1
-0@@ -3374,6 +3402,7 @@ static struct attribute *nvme_dev_attrs[] = { &dev_attr_sqsize.attr, &dev_attr_hostnqn.attr, &dev_attr_hostid.attr, + &dev_attr_io_queues_reload.attr, NULL };
Well for fabrics controllers it doesn't mean anything.
maybe we can do it non-visible for fabrics ?
Quoted 137 lines
drivers/nvme/host/nvme.h +1
-0@@ -260,6 +260,7 @@ struct nvme_ctrl {struct work_struct fw_act_work;unsigned long events;bool created; +bool io_queues_reload;#ifdef CONFIG_NVME_MULTIPATH /* asymmetric namespace access: */ drivers/nvme/host/pci.c +29
-23@@ -89,6 +89,9 @@ static bool __nvme_disable_io_queues(struct nvme_dev *dev, u8 opcode);*/ struct nvme_dev {struct nvme_queue *queues; +int nr_allocated_queue; +int nr_write_queues; +int nr_poll_queues;struct blk_mq_tag_set tagset;struct blk_mq_tag_set admin_tagset;u32 __iomem *dbs;@@ -209,25 +212,14 @@ struct nvme_iod {struct scatterlist *sg; }; -static unsigned int max_io_queues (void ) +static inline unsigned int nvme_dbbuf_size (struct nvme_dev *dev) { -return num_possible_cpus () + write_queues + poll_queues; -} - -static unsigned int max_queue_count (void ) -{ -/* IO queues + admin queue */ -return 1 +max_io_queues (); -} - -static inline unsigned int nvme_dbbuf_size (u32 stride) -{ -return (max_queue_count () *8 * stride); +return (dev->nr_allocated_queue *8 * dev->db_stride); }static int nvme_dbbuf_dma_alloc (struct nvme_dev *dev) { -unsigned int mem_size =nvme_dbbuf_size (dev->db_stride); +unsigned int mem_size =nvme_dbbuf_size (dev);if (dev->dbbuf_dbs)return 0 ;@@ -252,7 +244,7 @@ static int nvme_dbbuf_dma_alloc(struct nvme_dev *dev)static void nvme_dbbuf_dma_free (struct nvme_dev *dev) { -unsigned int mem_size =nvme_dbbuf_size (dev->db_stride); +unsigned int mem_size =nvme_dbbuf_size (dev);if (dev->dbbuf_dbs) { dma_free_coherent(dev->dev, mem_size,@@ -1991,7 +1983,7 @@ static int nvme_setup_host_mem(struct nvme_dev *dev)static void nvme_calc_irq_sets (struct irq_affinity *affd,unsigned int nrirqs) {struct nvme_dev *dev = affd->priv; -unsigned int nr_read_queues; +unsigned int nr_read_queues, nr_write_queues = dev->nr_write_queues;/* * If there is no interupt available for queues, ensure that @@ -2007,12 +1999,12 @@ static void nvme_calc_irq_sets(struct irq_affinity *affd, unsigned int nrirqs)if (!nrirqs) { nrirqs =1 ; nr_read_queues =0 ; - }else if (nrirqs ==1 || !write_queues) { + }else if (nrirqs ==1 || !nr_write_queues) { nr_read_queues =0 ; - }else if (write_queues >= nrirqs) { + }else if (nr_write_queues >= nrirqs) { nr_read_queues =1 ; }else { - nr_read_queues = nrirqs - write_queues; + nr_read_queues = nrirqs - nr_write_queues; } dev->io_queues[HCTX_TYPE_DEFAULT ] = nrirqs - nr_read_queues;@@ -2036,7 +2028,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)* Poll queues don't need interrupts, but we need at least one IO * queue left over for non-polled IO. */ - this_p_queues = poll_queues; + this_p_queues = dev->nr_poll_queues;if (this_p_queues >= nr_io_queues) { this_p_queues = nr_io_queues -1 ; irq_queues =1 ;@@ -2073,7 +2065,17 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)int result, nr_io_queues;unsigned long size; - nr_io_queues =max_io_queues (); +/* reload io queue count from module paramters write/poll_queues */ +if (dev->ctrl.io_queues_reload) { + dev->nr_write_queues = write_queues; + dev->nr_poll_queues = poll_queues; + nr_io_queues =num_possible_cpus () + dev->nr_write_queues + + dev->nr_poll_queues; +if (nr_io_queues > dev->nr_allocated_queue -1 ) + nr_io_queues = dev->nr_allocated_queue -1 ; + }else { + nr_io_queues = dev->nr_allocated_queue -1 ; + }/* * If tags are shared with admin queue (Apple bug), then @@ -2742,7 +2744,7 @@ static void nvme_async_probe(void *data, async_cookie_t cookie)static int nvme_probe (struct pci_dev *pdev,const struct pci_device_id *id) { -int node, result = -ENOMEM ; +int node, nr_queue, result = -ENOMEM ;struct nvme_dev *dev;unsigned long quirks = id->driver_data;size_t alloc_size;@@ -2755,11 +2757,18 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)if (!dev)return -ENOMEM ; - dev->queues = kcalloc_node(max_queue_count(), sizeof(struct nvme_queue), + dev->nr_write_queues = write_queues; + dev->nr_poll_queues = poll_queues; +/* IO queues + admin queue */ + nr_queue = dev->nr_write_queues + dev->nr_poll_queues + +num_possible_cpus () +1 ;
drivers/nvme/host/pci.c static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) · line 2774
Quoted 10 lines
drivers/nvme/host/pci.c +3
-0+ dev->queues =kcalloc_node (nr_queue,sizeof (struct nvme_queue ),GFP_KERNEL , node);if (!dev->queues) goto free; + dev->nr_allocated_queue = nr_queue; + dev->dev =get_device (&pdev->dev);pci_set_drvdata (pdev, dev);
_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Quoted 28 lines · Max Gurtovoy
Quoted 25 lines · Weiping Zhang
Since the commit
147b27e4bd0"nvme-pci: allocate device queues storage space at probe"nvme_alloc_queuewill not alloc structnvme_queueany more.
If user change write/poll_queues to larger than the number of
allocated queue innvme_probe,nvme_alloc_queuewill touch
the memory out of boundary.This patch add
nr_allocated_queuesfor structnvme_devto record how many queues alloctaed innvme_probe, then nvme driver will not use more queues thannr_allocated_queueswhen user update queue count and do a controller reset.Since global module parameter can be changed at rumtime, so it's not safe to use these two parameter directly in the following functions:
nvme_dbbuf_dma_allocnvme_dbbuf_dma_freenvme_calc_irq_setsnvme_setup_io_queuesThis patch also add
nr_write_queues,nr_poll_queuesfor structnvme_devandio_queues_reloadfor structnvme_ctrl, that allow per-controller reload module parmater when reset controller. The nvme driver will not reload moduleparameter(write/poll_queues)by default when reset controller. If user want to reload them, they should enable it by echo 1 > /sys/block/<nvme_disk>/device/io_queues_reload.
Quoted 8 lines
Quoted 5 lines
By now, nvme pci driver allow user change io queue count for each
type(write, read, poll)withinnr_allocated_queue, that's to say, if user want to change queue dynamically by reset controller, they should setup io queues as many as possiable when laod nvme module, and then tune io queue count for each type.typo: laod --> load
OK, fix it in V3.
Quoted 63 lines
Quoted 54 lines
Signed-off-by Weiping Zhang <[email protected]>---
Changes since V1:
* don't use module parameternvme_dbbuf_dma_free,nvme_dbbuf_dma_allocandnvme_calc_irq_sets.
* add per-controller sysfs fileio_queues_reloadto enable/disable reload global module parameter.drivers/nvme/host/core.c | 29 +++++++++++++++++++++ drivers/nvme/host/nvme.h | 1 + drivers/nvme/host/pci.c | 55 +++++++++++++++++++++++----------------- 3 files changed, 62 insertions(+), 23 deletions(-)drivers/nvme/host/core.c +28
-0@@ -3357,6 +3357,34 @@ static ssize_t nvme_sysfs_show_address(struct device *dev, } static DEVICE_ATTR(address, S_IRUGO, nvme_sysfs_show_address, NULL); +static ssize_t nvme_sysfs_io_queues_reload_show (struct device *dev, +struct device_attribute *attr, +char *buf) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); + +return snprintf (buf,PAGE_SIZE ,"%d\n" , + ctrl->io_queues_reload ?1 :0 ); +} + +static ssize_t nvme_sysfs_io_queues_reload_store (struct device *dev, +struct device_attribute *attr,const char *buf, +size_t count) +{ +struct nvme_ctrl *ctrl =dev_get_drvdata (dev); +bool val; + +if (kstrtobool (buf, &val)) +return -EINVAL ; + ctrl->io_queues_reload = val; + +return count; +} + +static DEVICE_ATTR(io_queues_reload, S_IRUGO | S_IWUSR, + nvme_sysfs_io_queues_reload_show, + nvme_sysfs_io_queues_reload_store); +static struct attribute *nvme_dev_attrs[] = { &dev_attr_reset_controller.attr, &dev_attr_rescan_controller.attr,drivers/nvme/host/core.c static struct attribute *nvme_dev_attrs[] = { · line 3407
Quoted 6 lines
drivers/nvme/host/core.c +1
-0@@ -3374,6 +3402,7 @@ static struct attribute *nvme_dev_attrs[] = { &dev_attr_sqsize.attr, &dev_attr_hostnqn.attr, &dev_attr_hostid.attr, + &dev_attr_io_queues_reload.attr, NULL };Well for fabrics controllers it doesn't mean anything.
Quoted 2 lines
maybe we can do it non-visible for fabrics ?
Make sense, fix in v3.
Thanks
Quoted 4 lines
_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
_______________________________________________
linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme