i2c: slave-eeprom: Make it possible to pre-load eeprom data
Subsystems (2)
PATCH v2 1/1 i2c: slave-eeprom: Make it possible to pre-load eeprom data
If the slave eeprom has a "firmware-name" in devicetree, then pre-load the data in the eeprom with this file. Otherwise we init the eeprom with 0xFF.
Signed-off-by Björn Ardö <[email protected]>
--- drivers/i2c/i2c-slave-eeprom.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/i2c/i2c-slave-eeprom.c +25 -0
@@ -18,6 +18,7 @@*/ #include <linux/bitfield.h> +#include <linux/firmware.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h>
@@ -120,6 +121,26 @@ static ssize_t i2c_slave_eeprom_bin_write(struct file *filp, struct kobject *kobreturn count; } +static int i2c_slave_init_eeprom_data (struct eeprom_data *eeprom,struct i2c_client *client, +unsigned int size) +{ +const struct firmware *fw; +const char *eeprom_data; +int error =device_property_read_string (&client->dev,"firmware-name" , &eeprom_data); + +if (!error) { + error =request_firmware_into_buf (&fw, eeprom_data, &client->dev, + eeprom->buffer, size); +if (error) +return error; +release_firmware (fw); + }else { +/* An empty eeprom typically has all bits set to 1 */ +memset (eeprom->buffer,0xFF , size); + } +return 0 ; +} +static int i2c_slave_eeprom_probe (struct i2c_client *client,const struct i2c_device_id *id) {struct eeprom_data *eeprom;
@@ -138,6 +159,10 @@ static int i2c_slave_eeprom_probe(struct i2c_client *client, const struct i2c_despin_lock_init (&eeprom->buffer_lock);i2c_set_clientdata (client, eeprom); + ret =i2c_slave_init_eeprom_data (eeprom, client, size); +if (ret) +return ret; +sysfs_bin_attr_init (&eeprom->bin); eeprom->bin.attr.name ="slave-eeprom" ; eeprom->bin.attr.mode =S_IRUSR |S_IWUSR ;
Signature · 1 line
2.11.0