ath9k: Set RX filter based to allow broadcast Action frame RX
PATCH 2/2 ath9k_htc: Set RX filter based to allow broadcast Action frame RX
In reply to Jouni MalinenAdvertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames.
--- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++ drivers/net/wireless/ath/ath9k/htc_drv_main.c | 1 + drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 3 ++- 3 files changed, 5 insertions(+), 1 deletion(-)
This depends on "mac80211: Process multicast RX registration for Action frames" from mac80211-next.
drivers/net/wireless/ath/ath9k/htc_drv_init.c +2 -0
@@ -780,6 +780,8 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,SET_IEEE80211_PERM_ADDR (hw, common->macaddr);wiphy_ext_feature_set (hw->wiphy,NL80211_EXT_FEATURE_CQM_RSSI_LIST ); +wiphy_ext_feature_set (hw->wiphy, +NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS ); }static int ath9k_init_firmware_version (struct ath9k_htc_priv *priv)
drivers/net/wireless/ath/ath9k/htc_drv_main.c +1 -0
@@ -1251,6 +1251,7 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) FIF_OTHER_BSS | \ FIF_BCN_PRBRESP_PROMISC | \ FIF_PROBE_REQ | \ + FIF_MCAST_ACTION | \ FIF_FCSFAIL) static void ath9k_htc_configure_filter(struct ieee80211_hw *hw,
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +2 -1
@@ -893,7 +893,8 @@ u32 ath9k_htc_calcrxfilter(struct ath9k_htc_priv *priv)if (priv->rxfilter &FIF_PSPOLL ) rfilt |=ATH9K_RX_FILTER_PSPOLL ; -if (priv->nvifs >1 || priv->rxfilter &FIF_OTHER_BSS ) +if (priv->nvifs >1 || + priv->rxfilter & (FIF_OTHER_BSS |FIF_MCAST_ACTION )) rfilt |=ATH9K_RX_FILTER_MCAST_BCAST_ALL ;return rfilt;
Signature · 1 line
2.20.1
PATCH 1/2 ath9k: Set RX filter based to allow broadcast Action frame RX
Advertise support for multicast frame registration and update the RX filter based on the recently added FIF_MCAST_ACTION to allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames.
--- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/ath9k/main.c | 1 + drivers/net/wireless/ath/ath9k/recv.c | 3 ++- 3 files changed, 5 insertions(+), 1 deletion(-)
This depends on "mac80211: Process multicast RX registration for Action frames" from mac80211-next.
drivers/net/wireless/ath/ath9k/init.c +2 -0
@@ -1012,6 +1012,8 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)wiphy_ext_feature_set (hw->wiphy,NL80211_EXT_FEATURE_CQM_RSSI_LIST );wiphy_ext_feature_set (hw->wiphy,NL80211_EXT_FEATURE_AIRTIME_FAIRNESS ); +wiphy_ext_feature_set (hw->wiphy, +NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS ); } int ath9k_init_device(u16 devid, struct ath_softc *sc,
drivers/net/wireless/ath/ath9k/main.c +1 -0
@@ -1476,6 +1476,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)FIF_OTHER_BSS | \FIF_BCN_PRBRESP_PROMISC | \FIF_PROBE_REQ | \ +FIF_MCAST_ACTION | \ FIF_FCSFAIL)/* FIXME: sc->sc_full_reset ? */
drivers/net/wireless/ath/ath9k/recv.c +2 -1
@@ -413,7 +413,8 @@ u32 ath_calcrxfilter(struct ath_softc *sc)if (sc->cur_chandef.width !=NL80211_CHAN_WIDTH_20_NOHT ) rfilt |=ATH9K_RX_FILTER_COMP_BAR ; -if (sc->cur_chan->nvifs >1 || (sc->cur_chan->rxfilter &FIF_OTHER_BSS )) { +if (sc->cur_chan->nvifs >1 || + (sc->cur_chan->rxfilter & (FIF_OTHER_BSS |FIF_MCAST_ACTION ))) {/* This is needed for older chips */ if (sc->sc_ah->hw_version.macVersion <=AR_SREV_VERSION_9160 ) rfilt |=ATH9K_RX_FILTER_PROM ;
Signature · 1 line
2.20.1
kbuild test robot
build botRe: [PATCH 2/2] ath9k_htc: Set RX filter based to allow broadcast Action frame RX
In reply to Jouni MalinenI love your patch! Yet something to improve:
Hi Jouni,
I love your patch! Yet something to improve:
[auto build test ERROR on wireless-drivers-next/master]
[also build test ERROR on wireless-drivers/master ath6kl/ath-next v5.7-rc3 next-20200424] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Jouni-Malinen/ath9k-Set-RX-filter-based-to-allow-broadcast-Action-frame-RX/20200428-022034 base: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git master config: nds32-allyesconfig (attached as .config) compiler: nds32le-linux-gcc (GCC) 9.3.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=nds32
If you fix the issue, kindly add following tag as appropriate
All error/warnings (new ones prefixed by >>):
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function 'ath9k_htc_calcrxfilter':
>> drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:897:40: error: 'FIF_MCAST_ACTION' undeclared (first use in this function)
897 | priv->rxfilter & (FIF_OTHER_BSS | FIF_MCAST_ACTION))
| ^~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:897:40: note: each undeclared identifier is reported only once for each function it appears in
--
drivers/net/wireless/ath/ath9k/htc_drv_main.c: In function 'ath9k_htc_configure_filter':
>> drivers/net/wireless/ath/ath9k/htc_drv_main.c:1254:2: error: 'FIF_MCAST_ACTION' undeclared (first use in this function)
1254 | FIF_MCAST_ACTION | \
| ^~~~~~~~~~~~~~~~
>> drivers/net/wireless/ath/ath9k/htc_drv_main.c:1267:19: note: in expansion of macro 'SUPPORTED_FILTERS'
1267 | changed_flags &= SUPPORTED_FILTERS;
| ^~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath9k/htc_drv_main.c:1254:2: note: each undeclared identifier is reported only once for each function it appears in
1254 | FIF_MCAST_ACTION | \
| ^~~~~~~~~~~~~~~~
>> drivers/net/wireless/ath/ath9k/htc_drv_main.c:1267:19: note: in expansion of macro 'SUPPORTED_FILTERS'
1267 | changed_flags &= SUPPORTED_FILTERS;
| ^~~~~~~~~~~~~~~~~
--
drivers/net/wireless/ath/ath9k/htc_drv_init.c: In function 'ath9k_set_hw_capab':
>> drivers/net/wireless/ath/ath9k/htc_drv_init.c:784:10: error: 'NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS' undeclared (first use in this function)
784 | NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath9k/htc_drv_init.c:784:10: note: each undeclared identifier is reported only once for each function it appears in
vim +/FIF_MCAST_ACTION +897 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
864
865 struct ath_hw *ah = priv->ah;
866 u32 rfilt;
867
868 rfilt = (ath9k_hw_getrxfilter(ah) & RX_FILTER_PRESERVE)
869 | ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
870 | ATH9K_RX_FILTER_MCAST;
871
872 if (priv->rxfilter & FIF_PROBE_REQ)
873 rfilt |= ATH9K_RX_FILTER_PROBEREQ;
874
875 if (ah->is_monitoring)
876 rfilt |= ATH9K_RX_FILTER_PROM;
877
878 if (priv->rxfilter & FIF_CONTROL)
879 rfilt |= ATH9K_RX_FILTER_CONTROL;
880
881 if ((ah->opmode == NL80211_IFTYPE_STATION) &&
882 (priv->nvifs <= 1) &&
883 !(priv->rxfilter & FIF_BCN_PRBRESP_PROMISC))
884 rfilt |= ATH9K_RX_FILTER_MYBEACON;
885 else
886 rfilt |= ATH9K_RX_FILTER_BEACON;
887
888 if (conf_is_ht(&priv->hw->conf)) {
889 rfilt |= ATH9K_RX_FILTER_COMP_BAR;
890 rfilt |= ATH9K_RX_FILTER_UNCOMP_BA_BAR;
891 }
892
893 if (priv->rxfilter & FIF_PSPOLL)
894 rfilt |= ATH9K_RX_FILTER_PSPOLL;
895
896 if (priv->nvifs > 1 ||
> 897 priv->rxfilter & (FIF_OTHER_BSS | FIF_MCAST_ACTION))
898 rfilt |= ATH9K_RX_FILTER_MCAST_BCAST_ALL;
899
900 return rfilt;
901
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
Re: [PATCH 2/2] ath9k_htc: Set RX filter based to allow broadcast Action frame RX
Quoted 23 lines · kbuild test robot
Hi Jouni,
I love your patch! Yet something to improve:
[auto build test ERROR on wireless-drivers-next/master]
[also build test ERROR on wireless-drivers/master ath6kl/ath-next v5.7-rc3 next-20200424] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]url: https://github.com/0day-ci/linux/commits/Jouni-Malinen/ath9k-Set-RX-filter-based-to-allow-broadcast-Action-frame-RX/20200428-022034 base: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git master config: nds32-allyesconfig (attached as .config) compiler: nds32le-linux-gcc (GCC) 9.3.0reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=nds32If you fix the issue, kindly add following tag as appropriate
Reported-by kbuild test robot <[email protected]>
Quoted 7 lines
All error/warnings (new ones prefixed by >>):
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function 'ath9k_htc_calcrxfilter':Quoted 2 lines
Quoted 2 lines
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:897:40: error:
'FIF_MCAST_ACTION' undeclared (first use in this function)897 | priv->rxfilter & (FIF_OTHER_BSS | FIF_MCAST_ACTION)) | ^~~~~~~~~~~~~~~~
This is expected as the patch depends on a commit in mac80211-next:
873b1cf61105 mac80211: Process multicast RX registration for Action frames
Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 6 lines · Jouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added
FIF_MCAST_ACTIONto allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames.Signed-off-by Jouni Malinen <[email protected]>
Depends on:
873b1cf61105 mac80211: Process multicast RX registration for Action frames
Currently in mac80211-next.
Signature · 3 lines
https://patchwork.kernel.org/patch/11510285/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 7 lines · Jouni Malinen
Advertise support for multicast frame registration and update the RX filter based on the recently added
FIF_MCAST_ACTIONto allow broadcast Action frames to be received. This is needed for Device Provisioning Protocol (DPP) use cases that use broadcast Public Action frames.Signed-off-by Jouni Malinen <[email protected]>Signed-off-by Kalle Valo <[email protected]>
2 patches applied to ath-next branch of ath.git, thanks.
c01c320d24ac ath9k: Set RX filter based to allow broadcast Action frame RX 2a9311b5d39a ath9k_htc: Set RX filter based to allow broadcast Action frame RX
Signature · 3 lines
https://patchwork.kernel.org/patch/11510285/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches