Skip to contentSkip to conversation

Add Allwinner H3/H5/A64 HDMI audio

PATCH In review Clément Péron 7 participants 25 messages Apr 26, 2020 – Apr 29, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Add Allwinner H3/H5/A64 HDMI audio

Hi,

This is some work done by Marcus Cooper and Jernej Škrabec. These patches are present in LibreElec kernel and have been tested by LE users.

I have rework them to follow kernel rules but I can't test them as I don't have H3, H5 or A64 boards.

If some sunxi users could confirm they worked as expected!

This serie goes in top off "Add H6 I2S support"[0]. You can find a branch for testing here[1].

Thanks,
Clement

0: https://lwn.net/Articles/817914/
1: https://github.com/clementperon/linux/tree/allwinner_hdmi

Marcus Cooper (7):
arm: dts: sunxi: h3/h5: Add DAI node for HDMI
arm: dts: sunxi: h3/h5: Add HDMI audio
arm64: dts: allwinner: a64: Add DAI node for HDMI
arm64: dts: allwinner: a64: Add HDMI audio
arm: sun8i: h3: Add HDMI audio to Orange Pi 2
arm: sun8i: h3: Add HDMI audio to Beelink X2
arm64: dts: allwinner: a64: Add HDMI audio to Pine64

 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts     |  8 +++++
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts     |  8 +++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi            | 34 ++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  |  8 +++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 35 +++++++++++++++++++
 5 files changed, 93 insertions(+)
Signature · 1 line
2.20.1
#2 lore raw

PATCH 2/7 arm: dts: sunxi: h3/h5: Add HDMI audio

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sunxi-h3-h5.dtsi +21 -0
index 9be13378d4df..3a4262294950 100644
@@ -105,6 +105,25 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "allwinner,hdmi";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,frame-inversion;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -672,6 +691,7 @@
 			dmas = <&dma 27>;
 			resets = <&ccu RST_BUS_I2S2>;
 			dma-names = "tx";
+			allwinner,playback-channels = <8>;
 			status = "disabled";
 		};
 
@@ -806,6 +826,7 @@
 		};
 
 		hdmi: hdmi@1ee0000 {
+			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
Signature · 1 line
2.20.1
#5 lore raw

PATCH 4/7 arm64: dts: allwinner: a64: Add HDMI audio

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +21 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "allwinner,hdmi";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,frame-inversion;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+
 	osc24M: osc24M_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -874,6 +893,7 @@
 			resets = <&ccu RST_BUS_I2S2>;
 			dma-names = "tx";
 			dmas = <&dma 27>;
+			allwinner,playback-channels = <8>;
 			status = "disabled";
 		};
 
@@ -1171,6 +1191,7 @@
 		};
 
 		hdmi: hdmi@1ee0000 {
+			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
Signature · 1 line
2.20.1
#22 lore raw

PATCH 5/7 arm: sun8i: h3: Add HDMI audio to Orange Pi 2

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Enable HDMI audio on the Orange Pi 2.

---
 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +8 -0
index 597c425d08ec..64e8e2829f27 100644
@@ -144,6 +144,14 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&r_ir_rx_pin>;
Signature · 1 line
2.20.1
#24 lore raw

PATCH 7/7 arm64: dts: allwinner: a64: Add HDMI audio to Pine64

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Enable HDMI audio on Pine64.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +8 -0
index 2165f238af13..c5939ba52f19 100644
@@ -99,6 +99,10 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 };
@@ -107,6 +111,10 @@
 	bias-pull-up;
 };
 
+&i2s2 {
+	status = "okay";
+};
+
 &mdio {
 	ext_rmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
Signature · 1 line
2.20.1
#23 lore raw

PATCH 6/7 arm: sun8i: h3: Add HDMI audio to Beelink X2

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Enable HDMI audio on the Beelink X2.

---
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +8 -0
index 45a24441ff18..f9bec6935120 100644
@@ -142,6 +142,14 @@
 	};
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
 &ir {
 	linux,rc-map-name = "rc-tanix-tx3mini";
 	pinctrl-names = "default";
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/7 arm: dts: sunxi: h3/h5: Add DAI node for HDMI

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Add the new DAI block for I2S2 which is used for HDMI audio.

---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
arch/arm/boot/dts/sunxi-h3-h5.dtsi +13 -0
index 22d533d18992..9be13378d4df 100644
@@ -662,6 +662,19 @@
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
Signature · 1 line
2.20.1
#4 lore raw

PATCH 3/7 arm64: dts: allwinner: a64: Add DAI node for HDMI

In reply to Clément Péron

From: Marcus Cooper <[email protected]>

Add the new DAI block for I2S2 which is used for HDMI audio.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +14 -0
index 8d10fe6d06b6..e56e1e3d4b73 100644
@@ -863,6 +863,20 @@
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			dmas = <&dma 27>;
+			status = "disabled";
+		};
+
 		dai: dai@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun50i-a64-codec-i2s";
Signature · 1 line
2.20.1
#3 lore raw

Re: [PATCH 2/7] arm: dts: sunxi: h3/h5: Add HDMI audio

In reply to Clément Péron

Hi,

Quoted 42 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sunxi-h3-h5.dtsi +19 -0
index 9be13378d4df..3a4262294950 100644
@@ -105,6 +105,25 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "allwinner,hdmi";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,frame-inversion;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/boot/dts/sunxi-h3-h5.dtsi line 694

Quoted 4 lines
arch/arm/boot/dts/sunxi-h3-h5.dtsi +1 -0
@@ -672,6 +691,7 @@
 			dmas = <&dma 27>;
 			resets = <&ccu RST_BUS_I2S2>;
 			dma-names = "tx";
+			allwinner,playback-channels = <8>;

This property doesn't exist in the binding

Maxime

#6 lore raw

Re: [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio

In reply to Clément Péron
Quoted 16 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 7 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
@@ -102,6 +102,25 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

If so, it's really too generic.

Maxime

#7 lore raw

Re: [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
              status = "disabled";
      };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

But maybe it's time to introduce proper name:
What about :
sun50i-a64-hdmi
sun50i-h6-hdmi
How should we handle this with h3 / h5 ? settings the simple-audio-card,name in each SoC dts? Or using sun50i-h3-hdmi as they are both identical?

Regards,
Clement

Quoted 4 lines

If so, it's really too generic.

Maxime

#8 lore raw

Re: [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio

Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
              status = "disabled";
      };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
sun50i-a64-hdmi
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

Quoted 3 lines

How should we handle this with h3 / h5 ? settings the simple-audio-card,name in each SoC dts? Or using sun50i-h3-hdmi as they are both identical?

Yeah, we can do the latter

Maxime

#9 lore raw

Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
              status = "disabled";
      };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

Thanks for your tips,
Clement

Quoted 8 lines
Quoted 4 lines

How should we handle this with h3 / h5 ? settings the simple-audio-card,name in each SoC dts? Or using sun50i-h3-hdmi as they are both identical?

Yeah, we can do the latter

Maxime

#10 lore raw

Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Quoted 6 lines · Clément Péron

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

The former is more idiomatic for ALSA.

#11 lore raw

Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Clément Péron
Quoted 53 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
  1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
               status = "disabled";
       };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

Quoted 6 lines

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Robin.

#12 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
  1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
               status = "disabled";
       };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

ChenYu

#13 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Quoted 69 lines · Chen-Yu Tsai
Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
  1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
               status = "disabled";
       };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

Maxime

#14 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Hi,

Quoted 75 lines · Maxime Ripard
Quoted 69 lines · Chen-Yu Tsai
Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
  1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
               status = "disabled";
       };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

Yes the final user doesn't care if it's sun50i A64 HDMI or sun50i H6 HDMI, but like Maxime said between final user and the sound-card name you may want to have a configuration layer.
This configuration layer can apply different settings depending on the sound card.
Having too generic name will make impossible specific card configuration.

Also you can have specific name per board which can be quite clear for final user.
- sun50i-a64-hdmi
- sun50i-a64-spdif
is not so hard to understand that one point to the HDMI whereas the other point to SPDIF.

Regards,
Clement

Quoted 2 lines

Maxime

#15 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Maxime Ripard
Quoted 74 lines · Maxime Ripard
Quoted 69 lines · Chen-Yu Tsai
Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
   1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
                status = "disabled";
        };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Furthermore, your argument works both ways - if the equivalent (or in common cases like DesignWare IP blocks, exact same) thing across 3 different SoCs has 3 different names, then it's that much harder for userspace that wants to present a consistent behaviour. I don't know exactly why LibreELEC have downstream patches that standardise all the Rockchip ones to "HDMI", but I can't help noting that they do.

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

Robin.

#16 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Dne sreda, 29. april 2020 ob 12:43:06 CEST je Robin Murphy napisal(a):

Quoted 3 lines · Maxime Ripard
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Apr 29, 2020 at 1:11 AM Robin Murphy <[email protected]>

Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines · Clément Péron
Quoted 7 lines

Hi Mark, Rob,

Quoted 4 lines · Maxime Ripard
Quoted 3 lines · Clément Péron

Hi Maxime,

On Tue, 28 Apr 2020 at 10:00, Maxime Ripard <[email protected]>

Quoted 90 lines · wrote:
Quoted 66 lines
Quoted 62 lines
Quoted 53 lines
Quoted 53 lines
Quoted 41 lines
Quoted 41 lines
Quoted 25 lines · Clément Péron
Quoted 24 lines

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---

   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21
   +++++++++++++++++++
   1 file changed, 21 insertions(+)
(quoted diff) +0 -0

b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e56e1e3d4b73..08ab6b5e72a5 100644

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
@@ -102,6 +102,25 @@
 
                status = "disabled";
 
        };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 110

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Furthermore, your argument works both ways - if the equivalent (or in common cases like DesignWare IP blocks, exact same) thing across 3 different SoCs has 3 different names, then it's that much harder for userspace that wants to present a consistent behaviour. I don't know exactly why LibreELEC have downstream patches that standardise all the Rockchip ones to "HDMI", but I can't help noting that they do.

Quoted 3 lines

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

This combination (DesignWare HDMI controller + I2S) is same as on Rockchip. Only difference is slightly different version of HDMI controller and different I2S core. Not sure what kind of configuration do you have in mind, but all these controllers support 2-8 channels, different sample sizes, even passthrough mode can be set (but it's not implemented yet). I would say that this audio output supports quiet a few possible configurations.

BTW, above patches were thoroughly tested in LibreELEC. The only missing thing is extending I2S driver to support channel allocation through DT, but that's outside the scope of this series. Currently only 2 channels will work correctly.

Best regards,
Jernej

#17 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

Quoted 108 lines · Jernej Škrabec

Dne sreda, 29. april 2020 ob 12:43:06 CEST je Robin Murphy napisal(a):

Quoted 3 lines · Maxime Ripard
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Apr 29, 2020 at 1:11 AM Robin Murphy <[email protected]>

Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines · Clément Péron
Quoted 7 lines

Hi Mark, Rob,

Quoted 4 lines · Maxime Ripard
Quoted 3 lines · Clément Péron

Hi Maxime,

On Tue, 28 Apr 2020 at 10:00, Maxime Ripard <[email protected]>

Quoted 90 lines · wrote:
Quoted 66 lines
Quoted 62 lines
Quoted 53 lines
Quoted 53 lines
Quoted 41 lines
Quoted 41 lines
Quoted 25 lines · Clément Péron
Quoted 24 lines

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---

    arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21

+++++++++++++++++++
1 file changed, 21 insertions(+)

(quoted diff) +0 -0

b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e56e1e3d4b73..08ab6b5e72a5 100644

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
@@ -102,6 +102,25 @@
 
                 status = "disabled";
 
         };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 110

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Furthermore, your argument works both ways - if the equivalent (or in common cases like DesignWare IP blocks, exact same) thing across 3 different SoCs has 3 different names, then it's that much harder for userspace that wants to present a consistent behaviour. I don't know exactly why LibreELEC have downstream patches that standardise all the Rockchip ones to "HDMI", but I can't help noting that they do.

Quoted 3 lines

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

Quoted 6 lines

This combination (DesignWare HDMI controller + I2S) is same as on Rockchip. Only difference is slightly different version of HDMI controller and different I2S core. Not sure what kind of configuration do you have in mind, but all these controllers support 2-8 channels, different sample sizes, even passthrough mode can be set (but it's not implemented yet). I would say that this audio output supports quiet a few possible configurations.

Right, what I'm getting at is that the stuff that matters is all regular audio capabilities exposed via the appropriate APIs, and any choices are going to be mostly based on the audio being played and what the receiver on the other end of the link supports. I'm genuinely curious as to what actual configuration decision could be made purely based on the SoC name, regardless of the board, receiver, or the capabilities advertised by the interface itself.

Thanks,
Robin.

#18 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Jernej Škrabec
Quoted 104 lines · Jernej Škrabec

Dne sreda, 29. april 2020 ob 12:43:06 CEST je Robin Murphy napisal(a):

Quoted 3 lines · Maxime Ripard
Quoted 2 lines · Chen-Yu Tsai
Quoted 1 line

On Wed, Apr 29, 2020 at 1:11 AM Robin Murphy <[email protected]>

Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines · Clément Péron
Quoted 7 lines

Hi Mark, Rob,

Quoted 4 lines · Maxime Ripard
Quoted 3 lines · Clément Péron

Hi Maxime,

On Tue, 28 Apr 2020 at 10:00, Maxime Ripard <[email protected]>

Quoted 90 lines · wrote:
Quoted 66 lines
Quoted 62 lines
Quoted 53 lines
Quoted 53 lines
Quoted 41 lines
Quoted 41 lines
Quoted 25 lines · Clément Péron
Quoted 24 lines

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---

   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21
   +++++++++++++++++++
   1 file changed, 21 insertions(+)
(quoted diff) +0 -0

b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index e56e1e3d4b73..08ab6b5e72a5 100644

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
@@ -102,6 +102,25 @@
 
                status = "disabled";
 
        };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 110

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Furthermore, your argument works both ways - if the equivalent (or in common cases like DesignWare IP blocks, exact same) thing across 3 different SoCs has 3 different names, then it's that much harder for userspace that wants to present a consistent behaviour. I don't know exactly why LibreELEC have downstream patches that standardise all the Rockchip ones to "HDMI", but I can't help noting that they do.

Quoted 7 lines
Quoted 3 lines

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

Only difference is slightly different version of HDMI controller and different This combination (DesignWare HDMI controller + I2S) is same as on Rockchip. I2S core.

Well, that fact only is already information that is not carried on to the userspace. Think about it this way: let's say you run Debian, you just installed it without any configuration, and you don't have any knowledge about the hardware, you're just a user. Can the OS know how to configure that output based on the card name "HDMI" alone?

HDMI is an easy one compared to the i2s + codec combinations we might have, but it already has some interesting differences between hardwares. For example, the RPi iirc needs an IEC958 format, while this one works just fine with a standard PCM format.

Maxime

#19 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Robin Murphy

Hi

(Sorry for ignoring a couple of mails from you, for some reason your mails didn't end up in my Inbox)

Quoted 99 lines · Robin Murphy
Quoted 74 lines · Maxime Ripard
Quoted 69 lines · Chen-Yu Tsai
Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
   1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
                status = "disabled";
        };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Furthermore, your argument works both ways - if the equivalent (or in common cases like DesignWare IP blocks, exact same) thing across 3 different SoCs has 3 different names, then it's that much harder for userspace that wants to present a consistent behaviour. I don't know exactly why LibreELEC have downstream patches that standardise all the Rockchip ones to "HDMI", but I can't help noting that they do.

Quoted 3 lines

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

That's not really true though. simple-audio-card is used when the connection between the DAIs is simple. It doesn't mean that the configuration of the CPU DAI (i2s controller in that case) or the configuration of the codec are simple, and with pretty featureful codecs, between the various muxes and amps, it can actually be quite difficult to get the combination of controls you need to change to output something on the output you expected.

Maxime

#20 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Robin Murphy
Quoted 83 lines · Robin Murphy
Quoted 74 lines · Maxime Ripard
Quoted 69 lines · Chen-Yu Tsai
Quoted 59 lines · Robin Murphy
Quoted 57 lines · Clément Péron

Hi Mark, Rob,

Quoted 42 lines · Maxime Ripard
Quoted 40 lines · Clément Péron

Hi Maxime,

Quoted 21 lines · Maxime Ripard
Quoted 19 lines · Clément Péron

From: Marcus Cooper <[email protected]>

Add a simple-soundcard to link audio between HDMI and I2S.

---
   arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 21 +++++++++++++++++++
   1 file changed, 21 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +0 -0
index e56e1e3d4b73..08ab6b5e72a5 100644
@@ -102,6 +102,25 @@
                status = "disabled";
        };
 
Quoted 9 lines

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi line 108

Quoted 4 lines
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +4 -0
+     hdmi_sound: hdmi-sound {
+             compatible = "simple-audio-card";
+             simple-audio-card,format = "i2s";
+             simple-audio-card,name = "allwinner,hdmi";

I'm not sure what the usual card name should be like though. I would assume that this should be something specific enough so that you're able to differentiate between boards / SoC so that the userspace can choose a different configuration based on it?

I really don't know what we should use here,
I just have a look at other SoC:
rk3328: "HDMI"
rk3399: "hdmi-sound"
r8a774c0-cat874: "CAT874 HDMI sound"

Quoted 7 lines
Quoted 4 lines

But maybe it's time to introduce proper name:
What about :
pat
sun50i-h6-hdmi

It's pretty much what we've been using for the other sound cards we have, so it makes sense to me.

I have a question regarding the simple-audio-card,name. In this patch, I would like to introduce a simple-audio-card for the Allwinner A64 HDMI.

Quoted 8 lines
Quoted 2 lines

What should be the preferred name for this sound card? "sun50i-a64-hdmi" ? "allwinner, sun50i-a64-hdmi" ?

I can at least speak for RK3328, and the reasoning there was that as the user looking at what aplay -l says, I don't give a hoot about what the SoC may be called, I see two cards and I want to know, with the least amount of uncertainty, which one will make the sound come out of the port that's labelled "HDMI" on the box ;)

Quoted 3 lines

I agree. The user really doesn't care what SoC the system uses. The only real requirement is to be able to tell which output the card is related to, i.e. is it onboard or an external DAC, is it analog or HDMI, etc..

Quoted 6 lines

Yeah, but it's exactly the point.

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

Quoted 8 lines

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

Heh, those are bad examples. Although the single HD-audio driver supports (literally) thousands of different models and hardware configurations, it's more or less self-contained; i.e. it needs neither UCM nor exotic setups. IOW, user-space don't need much to care about the difference of the hardware. (Admittedly there are subtle things to be done for HD-audio, too, but PA can handle it in a generic way, for example.)

OTOH, in general, ASoC drivers do need the individual setups; that's almost unavoidable from its design perspective. Hence, unless the identical configuration is needed, it'd be wiser to provide different driver names to identify which setup to be applied.

Takashi

#21 lore raw

Re: [linux-sunxi] Re: Audio sound card name [was [PATCH 4/7] arm64: dts: allwinner: a64: Add HDMI audio]

In reply to Robin Murphy
Quoted 2 lines · Robin Murphy
Quoted 1 line · Maxime Ripard

On Wed, Apr 29, 2020 at 02:24:00PM +0800, Chen-Yu Tsai wrote:

Please delete unneeded context from mails when replying. Doing this makes it much easier to find your reply in the message, helping ensure it won't be missed by people scrolling through the irrelevant quoted material.

Quoted 5 lines
Quoted 4 lines

If we also end up with "HDMI" as our card name, then the userspace has no way to tell anymore if it's running from an rk3328 or an allwinner SoC, or something else entirely. And therefore it cannot really configure anything to work out of the box anymore.

Quoted 8 lines

OK, you're a userspace audio application - enlighten me as to what exact chip you're running on here, and why you need to know:

card 0: HDMI [HDA ATI HDMI]

or how about here?

card 0: Intel [HDA Intel]

In the case of HDMI for embedded platforms since there is generally no control in the audio path it is unlikely to make a *huge* difference, though if there are expansion buses or multiple HDMI ports it can be useful to help people identify which particular HDMI port it is. For other cards the names are part of userspace working out which config file to apply to the card so deduplication can help, and also the plastics tend to matter.

Quoted 3 lines

With simple-audio-card we're talking about trivial interfaces that often don't expose any controls at all, so there's unlikely to be much 'configuration' for userspace to do beyond choosing which card to output to.

This is a reasonable assumption for HDMI but it is not at all a reasonable assumption for simple-audio-card in general - just because the links between the SoC and the external components are simple that doesn't mean that any of those components are simple, and even if the hardware is simple that does not mean that configuration is unimportant
- the difference between full scale output and appropriate headphone volumes is for example *extremely* important.