Skip to contentSkip to conversation

board/freescale: Remove LS2080A_EMU support

PATCH Superseded Priyanka Jain 1 participant 1 message Apr 28, 2020

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 board/freescale: Remove LS2080A_EMU support

Removing LS2080A_EMU as it was pre-silicon
board and is no longer Maintained.

---
 arch/arm/Kconfig                    | 12 -----
 arch/arm/cpu/armv8/Kconfig          |  2 +-
 board/freescale/ls2080a/Kconfig     | 18 -------
 board/freescale/ls2080a/MAINTAINERS |  2 -
 configs/ls2080a_emu_defconfig       | 37 -------------
 drivers/i2c/Kconfig                 |  4 +-
 include/configs/ls2080a_emu.h       | 80 -----------------------------
 7 files changed, 3 insertions(+), 152 deletions(-)
 delete mode 100644 configs/ls2080a_emu_defconfig
 delete mode 100644 include/configs/ls2080a_emu.h
arch/arm/Kconfig +0 -12
index 1bcf345028..e4b29e92c8 100644
@@ -1134,18 +1134,6 @@ config TARGET_VEXPRESS64_JUNO
 	select ARM64
 	select PL01X_SERIAL
 
-config TARGET_LS2080A_EMU
-	bool "Support ls2080a_emu"
-	select ARCH_LS2080A
-	select ARM64
-	select ARMV8_MULTIENTRY
-	select FSL_DDR_SYNC_REFRESH
-	help
-	  Support for Freescale LS2080A_EMU platform.
-	  The LS2080A Development System (EMULATOR) is a pre-silicon
-	  development platform that supports the QorIQ LS2080A
-	  Layerscape Architecture processor.
-
 config TARGET_LS2080A_SIMU
 	bool "Support ls2080a_simu"
 	select ARCH_LS2080A
arch/arm/cpu/armv8/Kconfig +1 -1
index 16c83e8614..006453921e 100644
@@ -99,7 +99,7 @@ config PSCI_RESET
 	select ARM_SMCCC if OF_CONTROL
 	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
-		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
+		   !TARGET_LS2080ARDB && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
board/freescale/ls2080a/Kconfig +0 -18
index b5033511b5..6015b8f930 100644
@@ -1,21 +1,3 @@
-if TARGET_LS2080A_EMU
-
-config SYS_BOARD
-	default "ls2080a"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080a_emu"
-
-source "board/freescale/common/Kconfig"
-
-endif
-
 if TARGET_LS2080A_SIMU
 
 config SYS_BOARD
board/freescale/ls2080a/MAINTAINERS +0 -2
index e0e4e3f83e..3afaab9c77 100644
@@ -3,7 +3,5 @@ M:	Prabhakar Kushwaha <[email protected]>
 M:	Priyanka Jain <[email protected]>
 S:	Maintained
 F:	board/freescale/ls2080a/
-F:	include/configs/ls2080a_emu.h
-F:	configs/ls2080a_emu_defconfig
 F:	include/configs/ls2080a_simu.h
 F:	configs/ls2080a_simu_defconfig
configs/ls2080a_emu_defconfig deleted +0 -37
deleted file mode 100644
index 7927e3838f..0000000000
@@ -1,37 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_EMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_IDENT_STRING=" LS2080A-EMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_MP=y
-# CONFIG_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
drivers/i2c/Kconfig +2 -2
index e42b6516bf..02a74eb136 100644
@@ -214,7 +214,7 @@ endif
 if SYS_I2C_MXC_I2C1
 config SYS_MXC_I2C1_SPEED
 	int "I2C Channel 1 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 1 speed
@@ -229,7 +229,7 @@ endif
 if SYS_I2C_MXC_I2C2
 config SYS_MXC_I2C2_SPEED
 	int "I2C Channel 2 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 2 speed
include/configs/ls2080a_emu.h deleted +0 -80

80 lines not on this page · raw message

Signature · 1 line
2.17.1