Skip to contentSkip to conversation

change the clk-mux get_rate helper

PATCH New Dario Binacchi 2 participants 6 messages May 2, 2020 – May 3, 2020 Common clk

lore
Share & tools
lore
#0 lore raw

cover change the clk-mux get_rate helper

Changes:
- Apply coding style
- Fix typo
- Fix access to sandbox register
- Change the gate_rate helper

Dario Binacchi (4):
clk: ccf: mux: change include order
clk: ccf: mux: fix typo
clk: ccf: mux: fix access to the sandbox register
clk: ccf: mux: change the get_rate helper

 drivers/clk/clk-mux.c | 44 +++++++++++++++++++++++++++++++++++++------
 test/dm/clk_ccf.c     | 24 +++++++++++++++++++++++
 2 files changed, 62 insertions(+), 6 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/4 clk: ccf: mux: change include order

Apply u-boot coding style on include files order.

---

 drivers/clk/clk-mux.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/clk/clk-mux.c +4 -4
index b9d2ae6778..9511a80fe3 100644
@@ -22,15 +22,15 @@
  */
 
 #include <common.h>
-#include <asm/io.h>
-#include <malloc.h>
+#include <clk.h>
 #include <clk-uclass.h>
 #include <dm/device.h>
 #include <dm/devres.h>
+#include <malloc.h>
+#include <asm/io.h>
 #include <linux/clk-provider.h>
-#include <clk.h>
-#include "clk.h"
 #include <linux/err.h>
+#include "clk.h"
 
 #define UBOOT_DM_CLK_CCF_MUX "ccf_clk_mux"
 
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/4 clk: ccf: mux: fix typo

In reply to Dario Binacchi

Close the opening bracket.

---

 drivers/clk/clk-mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-mux.c +1 -1
index 9511a80fe3..6264b63900 100644
@@ -193,7 +193,7 @@ struct clk *clk_hw_register_mux_table(struct device *dev, const char *name,
 	 * Read the current mux setup - so we assign correct parent.
 	 *
 	 * Changing parent would require changing internals of udevice struct
-	 * for the corresponding clock (to do that define .set_parent() method.
+	 * for the corresponding clock (to do that define .set_parent() method).
 	 */
 	ret = clk_register(clk, UBOOT_DM_CLK_CCF_MUX, name,
 			   parent_names[clk_mux_get_parent(clk)]);
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/4 clk: ccf: mux: fix access to the sandbox register

In reply to Dario Binacchi

The tests developed for the mux clock are run on the sandbox. They don't call the clk_mux_set_parent routine and therefore they do not detect this error.

---

 drivers/clk/clk-mux.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/clk/clk-mux.c +8 -0
index 6264b63900..8f85e84ae9 100644
@@ -134,12 +134,20 @@ static int clk_mux_set_parent(struct clk *clk, struct clk *parent)
 	if (mux->flags & CLK_MUX_HIWORD_MASK) {
 		reg = mux->mask << (mux->shift + 16);
 	} else {
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+		reg = mux->io_mux_val;
+#else
 		reg = readl(mux->reg);
+#endif
 		reg &= ~(mux->mask << mux->shift);
 	}
 	val = val << mux->shift;
 	reg |= val;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+	mux->io_mux_val = reg;
+#else
 	writel(reg, mux->reg);
+#endif
 
 	return 0;
 }
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/4 clk: ccf: mux: change the get_rate helper

In reply to Dario Binacchi

The previous version of the get_rate helper does not work if the mux clock parent is changed after the probe. This error has not been detected because this condition has not been tested. The error occurs because the set_parent helper does not change the parent of the clock device but only the clock selection register. Since changing the parent of a probed device can be tricky, the new version of the get_rate helper provides the rate of the selected clock and not that of the parent.

---

 drivers/clk/clk-mux.c | 26 +++++++++++++++++++++++++-
 test/dm/clk_ccf.c     | 24 ++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 1 deletion(-)
drivers/clk/clk-mux.c +25 -1
index 8f85e84ae9..1f2dab647f 100644
@@ -152,8 +152,32 @@ static int clk_mux_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
+static ulong clk_mux_get_rate(struct clk *clk)
+{
+	struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ?
+			dev_get_clk_ptr(clk->dev) : clk);
+	struct udevice *parent;
+	struct clk *pclk;
+	int err, index;
+
+	index = clk_mux_get_parent(clk);
+	if (index >= mux->num_parents)
+		return -EFAULT;
+
+	err = uclass_get_device_by_name(UCLASS_CLK, mux->parent_names[index],
+					&parent);
+	if (err)
+		return err;
+
+	pclk = dev_get_clk_ptr(parent);
+	if (!pclk)
+		return -ENODEV;
+
+	return clk_get_rate(pclk);
+}
+
 const struct clk_ops clk_mux_ops = {
-	.get_rate = clk_generic_get_rate,
+	.get_rate = clk_mux_get_rate,
 	.set_parent = clk_mux_set_parent,
 };
 
test/dm/clk_ccf.c +24 -0
index ae3a4d8a76..bf99776ac1 100644
@@ -46,6 +46,18 @@ static int dm_test_clk_ccf(struct unit_test_state *uts)
 	rate = clk_get_parent_rate(clk);
 	ut_asserteq(rate, 60000000);
 
+	rate = clk_get_rate(clk);
+	ut_asserteq(rate, 60000000);
+
+	ret = clk_get_by_id(SANDBOX_CLK_PLL3_80M, &pclk);
+	ut_assertok(ret);
+
+	ret = clk_set_parent(clk, pclk);
+	ut_assertok(ret);
+
+	rate = clk_get_rate(clk);
+	ut_asserteq(rate, 80000000);
+
 	ret = clk_get_by_id(SANDBOX_CLK_USDHC2_SEL, &clk);
 	ut_assertok(ret);
 	ut_asserteq_str("usdhc2_sel", clk->dev->name);
@@ -56,6 +68,18 @@ static int dm_test_clk_ccf(struct unit_test_state *uts)
 	pclk = clk_get_parent(clk);
 	ut_asserteq_str("pll3_80m", pclk->dev->name);
 
+	rate = clk_get_rate(clk);
+	ut_asserteq(rate, 80000000);
+
+	ret = clk_get_by_id(SANDBOX_CLK_PLL3_60M, &pclk);
+	ut_assertok(ret);
+
+	ret = clk_set_parent(clk, pclk);
+	ut_assertok(ret);
+
+	rate = clk_get_rate(clk);
+	ut_asserteq(rate, 60000000);
+
 	/* Test the composite of CCF */
 	ret = clk_get_by_id(SANDBOX_CLK_I2C, &clk);
 	ut_assertok(ret);
Signature · 1 line
2.17.1
#5 lore raw

PATCH 4/4 clk: ccf: mux: change the get_rate helper

+Stephen Warren

Quoted 9 lines · Dario Binacchi

The previous version of the get_rate helper does not work if the mux clock parent is changed after the probe. This error has not been detected because this condition has not been tested. The error occurs because the set_parent helper does not change the parent of the clock device but only the clock selection register. Since changing the parent of a probed device can be tricky, the new version of the get_rate helper provides the rate of the selected clock and not that of the parent.

Quoted 7 lines

---

 drivers/clk/clk-mux.c | 26 +++++++++++++++++++++++++-
 test/dm/clk_ccf.c     | 24 ++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 1 deletion(-)