Skip to contentSkip to conversation

LUKS: encryption slot management using amend interface

PATCH Superseded Maxim Levitsky 3 participants 18 messages May 3, 2020 – May 4, 2020

Subsystems (2)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v3 cover LUKS: encryption slot management using amend interface

Hi!
Here is the updated series of my patches, incorporating all the feedback I received.

This implements the API interface that we agreed upon except that I merged the LUKSKeyslotActive/LUKSKeyslotInactive union into a struct because otherwise I need nested unions which are not supported currently by QAPI parser. This didn't change the API and thus once support for nested unions is there, it can always be implemented in backward compatible way.

I hope that this series will finally be considered for merging, since I am somewhat running out of time to finish this task.

Patches are strictly divided by topic to 3 groups, and each group depends on former groups.

* Patches 1,2 implement qcrypto generic amend interface, including definition of structs used in crypto.json and implement this in luks crypto driver Nothing is exposed to the user at this stage

* Patches 3-9 use the code from patches 1,2 to implement qemu-img amend based encryption slot management for luks and for qcow2, and add a bunch of iotests to cover that.

* Patches 10-13 add x-blockdev-amend (I'll drop the -x prefix if you like), and wire it to luks and qcow2 driver to implement qmp based encryption slot management also using the code from patches 1,2, and also add a bunch of iotests to cover this.

Tested with -raw,-qcow2 and -luks iotests and 'make check'

V3: rebased, addressed most of the review feedback.
For now I kept the slot bitmap code since I am not sure that replacing it will be better.

Best regards,
Maxim Levitsky

clone of "luks-keymgmnt-v2"

Maxim Levitsky (14):
qcrypto/core: add generic infrastructure for crypto options amendment qcrypto/luks: implement encryption key management block/amend: add 'force' option
block/amend: separate amend and create options for qemu-img block/amend: refactor qcow2 amend options
block/crypto: rename two functions
block/crypto: implement the encryption key management block/qcow2: extend qemu-img amend interface with crypto options
iotests: filter few more luks specific create options
iotests: qemu-img tests for luks key management block/core: add generic infrastructure for x-blockdev-amend qmp
command
block/crypto: implement blockdev-amend
block/qcow2: implement blockdev-amend
iotests: add tests for blockdev-amend

 block.c                          |   4 +-
 block/Makefile.objs              |   2 +-
 block/amend.c                    | 108 ++++++++
 block/crypto.c                   | 203 ++++++++++++++--
 block/crypto.h                   |  37 +++
 block/qcow2.c                    | 306 +++++++++++++----------
 crypto/block-luks.c              | 406 ++++++++++++++++++++++++++++++-
 crypto/block.c                   |  29 +++
 crypto/blockpriv.h               |   8 +
 docs/tools/qemu-img.rst          |   5 +-
 include/block/block.h            |   1 +
 include/block/block_int.h        |  24 +-
 include/crypto/block.h           |  22 ++
 qapi/block-core.json             |  68 ++++++
 qapi/crypto.json                 |  75 +++++-
 qapi/job.json                    |   4 +-
 qemu-img-cmds.hx                 |   4 +-
 qemu-img.c                       |  44 +++-
 tests/qemu-iotests/049.out       | 102 ++++----
 tests/qemu-iotests/061.out       |  12 +-
 tests/qemu-iotests/079.out       |  18 +-
 tests/qemu-iotests/082.out       | 176 ++++----------
 tests/qemu-iotests/085.out       |  38 +--
 tests/qemu-iotests/087.out       |   6 +-
 tests/qemu-iotests/115.out       |   2 +-
 tests/qemu-iotests/121.out       |   4 +-
 tests/qemu-iotests/125.out       | 192 +++++++--------
 tests/qemu-iotests/134.out       |   2 +-
 tests/qemu-iotests/144.out       |   4 +-
 tests/qemu-iotests/158.out       |   4 +-
 tests/qemu-iotests/182.out       |   2 +-
 tests/qemu-iotests/185.out       |   8 +-
 tests/qemu-iotests/188.out       |   2 +-
 tests/qemu-iotests/189.out       |   4 +-
 tests/qemu-iotests/198.out       |   4 +-
 tests/qemu-iotests/243.out       |  16 +-
 tests/qemu-iotests/250.out       |   2 +-
 tests/qemu-iotests/255.out       |   8 +-
 tests/qemu-iotests/263.out       |   4 +-
 tests/qemu-iotests/274.out       |  46 ++--
 tests/qemu-iotests/280.out       |   2 +-
 tests/qemu-iotests/284.out       |   6 +-
 tests/qemu-iotests/300           | 207 ++++++++++++++++
 tests/qemu-iotests/300.out       |  99 ++++++++
 tests/qemu-iotests/301           |  90 +++++++
 tests/qemu-iotests/301.out       |  30 +++
 tests/qemu-iotests/302           | 278 +++++++++++++++++++++
 tests/qemu-iotests/302.out       |  40 +++
 tests/qemu-iotests/303           | 233 ++++++++++++++++++
 tests/qemu-iotests/303.out       |  33 +++
 tests/qemu-iotests/common.filter |   6 +-
 tests/qemu-iotests/group         |   5 +
 52 files changed, 2503 insertions(+), 532 deletions(-)
 create mode 100644 block/amend.c
 create mode 100755 tests/qemu-iotests/300
 create mode 100644 tests/qemu-iotests/300.out
 create mode 100755 tests/qemu-iotests/301
 create mode 100644 tests/qemu-iotests/301.out
 create mode 100755 tests/qemu-iotests/302
 create mode 100644 tests/qemu-iotests/302.out
 create mode 100755 tests/qemu-iotests/303
 create mode 100644 tests/qemu-iotests/303.out
Signature · 1 line
2.17.2
#1 lore raw

PATCH v3 1/14 qcrypto/core: add generic infrastructure for crypto options amendment

This will be used first to implement luks keyslot management.

block_crypto_amend_opts_init will be used to convert qemu-img cmdline to QCryptoBlockAmendOptions

---
 block/crypto.c         | 17 +++++++++++++++++
 block/crypto.h         |  3 +++
 crypto/block.c         | 29 +++++++++++++++++++++++++++++
 crypto/blockpriv.h     |  8 ++++++++
 include/crypto/block.h | 22 ++++++++++++++++++++++
 qapi/crypto.json       | 16 ++++++++++++++++
 6 files changed, 95 insertions(+)
block/crypto.c +17 -0
index e02f343590..d379e39efb 100644
@@ -185,6 +185,23 @@ block_crypto_create_opts_init(QDict *opts, Error **errp)
     return ret;
 }
 
+QCryptoBlockAmendOptions *
+block_crypto_amend_opts_init(QDict *opts, Error **errp)
+{
+    Visitor *v;
+    QCryptoBlockAmendOptions *ret;
+
+    v = qobject_input_visitor_new_flat_confused(opts, errp);
+    if (!v) {
+        return NULL;
+    }
+
+    visit_type_QCryptoBlockAmendOptions(v, NULL, &ret, errp);
+
+    visit_free(v);
+    return ret;
+}
+
 
 static int block_crypto_open_generic(QCryptoBlockFormat format,
                                      QemuOptsList *opts_spec,
block/crypto.h +3 -0
index b935695e79..06e044c9be 100644
@@ -91,6 +91,9 @@
 QCryptoBlockCreateOptions *
 block_crypto_create_opts_init(QDict *opts, Error **errp);
 
+QCryptoBlockAmendOptions *
+block_crypto_amend_opts_init(QDict *opts, Error **errp);
+
 QCryptoBlockOpenOptions *
 block_crypto_open_opts_init(QDict *opts, Error **errp);
 
crypto/block.c +29 -0
index 6f42b32f1e..eb057948b5 100644
@@ -150,6 +150,35 @@ qcrypto_block_calculate_payload_offset(QCryptoBlockCreateOptions *create_opts,
     return crypto != NULL;
 }
 
+int qcrypto_block_amend_options(QCryptoBlock *block,
+                                QCryptoBlockReadFunc readfunc,
+                                QCryptoBlockWriteFunc writefunc,
+                                void *opaque,
+                                QCryptoBlockAmendOptions *options,
+                                bool force,
+                                Error **errp)
+{
+    if (options->format != block->format) {
+        error_setg(errp,
+                   "Cannot amend encryption format");
+        return -1;
+    }
+
+    if (!block->driver->amend) {
+        error_setg(errp,
+                   "Crypto format %s doesn't support format options amendment",
+                   QCryptoBlockFormat_str(block->format));
+        return -1;
+    }
+
+    return block->driver->amend(block,
+                                readfunc,
+                                writefunc,
+                                opaque,
+                                options,
+                                force,
+                                errp);
+}
 
 QCryptoBlockInfo *qcrypto_block_get_info(QCryptoBlock *block,
                                          Error **errp)
crypto/blockpriv.h +8 -0
index 71c59cb542..3c7ccea504 100644
@@ -62,6 +62,14 @@ struct QCryptoBlockDriver {
                   void *opaque,
                   Error **errp);
 
+    int (*amend)(QCryptoBlock *block,
+                 QCryptoBlockReadFunc readfunc,
+                 QCryptoBlockWriteFunc writefunc,
+                 void *opaque,
+                 QCryptoBlockAmendOptions *options,
+                 bool force,
+                 Error **errp);
+
     int (*get_info)(QCryptoBlock *block,
                     QCryptoBlockInfo *info,
                     Error **errp);
include/crypto/block.h +22 -0
index c77ccaf9c0..d274819791 100644
@@ -144,6 +144,28 @@ QCryptoBlock *qcrypto_block_create(QCryptoBlockCreateOptions *options,
                                    void *opaque,
                                    Error **errp);
 
+/**
+ * qcrypto_block_amend_options:
+ * @block: the block encryption object
+ *
+ * @readfunc: callback for reading data from the volume header
+ * @writefunc: callback for writing data to the volume header
+ * @opaque: data to pass to @readfunc and @writefunc
+ * @options: the new/amended encryption options
+ * @force: hint for the driver to allow unsafe operation
+ * @errp: error pointer
+ *
+ * Changes the crypto options of the encryption format
+ *
+ */
+int qcrypto_block_amend_options(QCryptoBlock *block,
+                                QCryptoBlockReadFunc readfunc,
+                                QCryptoBlockWriteFunc writefunc,
+                                void *opaque,
+                                QCryptoBlockAmendOptions *options,
+                                bool force,
+                                Error **errp);
+
 
 /**
  * qcrypto_block_calculate_payload_offset:
qapi/crypto.json +16 -0
index b2a4cff683..3fd0ce177e 100644
@@ -309,3 +309,19 @@
   'base': 'QCryptoBlockInfoBase',
   'discriminator': 'format',
   'data': { 'luks': 'QCryptoBlockInfoLUKS' } }
+
+
+
+##
+# @QCryptoBlockAmendOptions:
+#
+# The options that are available for all encryption formats
+# when amending encryption settings
+#
+# Since: 5.0
+##
+{ 'union': 'QCryptoBlockAmendOptions',
+  'base': 'QCryptoBlockOptionsBase',
+  'discriminator': 'format',
+  'data': {
+            } }
Signature · 1 line
2.17.2
#2 lore raw

PATCH v3 2/14 qcrypto/luks: implement encryption key management

In reply to Maxim Levitsky

Next few patches will expose that functionality
to the user.

---
 crypto/block-luks.c | 406 +++++++++++++++++++++++++++++++++++++++++++-
 qapi/crypto.json    |  61 ++++++-
 2 files changed, 463 insertions(+), 4 deletions(-)
crypto/block-luks.c +404 -2
index 4861db810c..26a05d30d4 100644
@@ -32,6 +32,7 @@
 #include "qemu/uuid.h"
 
 #include "qemu/coroutine.h"
+#include "qemu/bitmap.h"
 
 /*
  * Reference for the LUKS format implemented here is
@@ -70,6 +71,9 @@ typedef struct QCryptoBlockLUKSKeySlot QCryptoBlockLUKSKeySlot;
 
 #define QCRYPTO_BLOCK_LUKS_SECTOR_SIZE 512LL
 
+#define QCRYPTO_BLOCK_LUKS_DEFAULT_ITER_TIME_MS 2000
+#define QCRYPTO_BLOCK_LUKS_ERASE_ITERATIONS 40
+
 static const char qcrypto_block_luks_magic[QCRYPTO_BLOCK_LUKS_MAGIC_LEN] = {
     'L', 'U', 'K', 'S', 0xBA, 0xBE
 };
@@ -219,6 +223,9 @@ struct QCryptoBlockLUKS {
 
     /* Hash algorithm used in pbkdf2 function */
     QCryptoHashAlgorithm hash_alg;
+
+    /* Name of the secret that was used to open the image */
+    char *secret;
 };
 
 
@@ -1069,6 +1076,119 @@ qcrypto_block_luks_find_key(QCryptoBlock *block,
     return -1;
 }
 
+/*
+ * Returns true if a slot i is marked as active
+ * (contains encrypted copy of the master key)
+ */
+static bool
+qcrypto_block_luks_slot_active(const QCryptoBlockLUKS *luks,
+                               unsigned int slot_idx)
+{
+    uint32_t val = luks->header.key_slots[slot_idx].active;
+    return val ==  QCRYPTO_BLOCK_LUKS_KEY_SLOT_ENABLED;
+}
+
+/*
+ * Returns the number of slots that are marked as active
+ * (slots that contain encrypted copy of the master key)
+ */
+static unsigned int
+qcrypto_block_luks_count_active_slots(const QCryptoBlockLUKS *luks)
+{
+    size_t i = 0;
+    unsigned int ret = 0;
+
+    for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+        if (qcrypto_block_luks_slot_active(luks, i)) {
+            ret++;
+        }
+    }
+    return ret;
+}
+
+/*
+ * Finds first key slot which is not active
+ * Returns the key slot index, or -1 if it doesn't exist
+ */
+static int
+qcrypto_block_luks_find_free_keyslot(const QCryptoBlockLUKS *luks)
+{
+    size_t i;
+
+    for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+        if (!qcrypto_block_luks_slot_active(luks, i)) {
+            return i;
+        }
+    }
+    return -1;
+}
+
+/*
+ * Erases an keyslot given its index
+ * Returns:
+ *    0 if the keyslot was erased successfully
+ *   -1 if a error occurred while erasing the keyslot
+ *
+ */
+static int
+qcrypto_block_luks_erase_key(QCryptoBlock *block,
+                             unsigned int slot_idx,
+                             QCryptoBlockWriteFunc writefunc,
+                             void *opaque,
+                             Error **errp)
+{
+    QCryptoBlockLUKS *luks = block->opaque;
+    QCryptoBlockLUKSKeySlot *slot = &luks->header.key_slots[slot_idx];
+    g_autofree uint8_t *garbagesplitkey = NULL;
+    size_t splitkeylen = luks->header.master_key_len * slot->stripes;
+    size_t i;
+    Error *local_err = NULL;
+    int ret;
+
+    assert(slot_idx < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
+    assert(splitkeylen > 0);
+    garbagesplitkey = g_new0(uint8_t, splitkeylen);
+
+    /* Reset the key slot header */
+    memset(slot->salt, 0, QCRYPTO_BLOCK_LUKS_SALT_LEN);
+    slot->iterations = 0;
+    slot->active = QCRYPTO_BLOCK_LUKS_KEY_SLOT_DISABLED;
+
+    ret = qcrypto_block_luks_store_header(block,  writefunc,
+                                          opaque, &local_err);
+
+    if (ret) {
+        error_propagate(errp, local_err);
+    }
+    /*
+     * Now try to erase the key material, even if the header
+     * update failed
+     */
+    for (i = 0; i < QCRYPTO_BLOCK_LUKS_ERASE_ITERATIONS; i++) {
+        if (qcrypto_random_bytes(garbagesplitkey,
+                                 splitkeylen, &local_err) < 0) {
+            /*
+             * If we failed to get the random data, still write
+             * at least zeros to the key slot at least once
+             */
+            error_propagate(errp, local_err);
+
+            if (i > 0) {
+                return -1;
+            }
+        }
+        if (writefunc(block,
+                      slot->key_offset_sector * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE,
+                      garbagesplitkey,
+                      splitkeylen,
+                      opaque,
+                      &local_err) != splitkeylen) {
+            error_propagate(errp, local_err);
+            return -1;
+        }
+    }
+    return 0;
+}
 
 static int
 qcrypto_block_luks_open(QCryptoBlock *block,
@@ -1099,6 +1219,7 @@ qcrypto_block_luks_open(QCryptoBlock *block,
 
     luks = g_new0(QCryptoBlockLUKS, 1);
     block->opaque = luks;
+    luks->secret = g_strdup(options->u.luks.key_secret);
 
     if (qcrypto_block_luks_load_header(block, readfunc, opaque, errp) < 0) {
         goto fail;
@@ -1164,6 +1285,7 @@ qcrypto_block_luks_open(QCryptoBlock *block,
  fail:
     qcrypto_block_free_cipher(block);
     qcrypto_ivgen_free(block->ivgen);
+    g_free(luks->secret);
     g_free(luks);
     return -1;
 }
@@ -1204,7 +1326,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
 
     memcpy(&luks_opts, &options->u.luks, sizeof(luks_opts));
     if (!luks_opts.has_iter_time) {
-        luks_opts.iter_time = 2000;
+        luks_opts.iter_time = QCRYPTO_BLOCK_LUKS_DEFAULT_ITER_TIME_MS;
     }
     if (!luks_opts.has_cipher_alg) {
         luks_opts.cipher_alg = QCRYPTO_CIPHER_ALG_AES_256;
@@ -1244,6 +1366,8 @@ qcrypto_block_luks_create(QCryptoBlock *block,
                    optprefix ? optprefix : "");
         goto error;
     }
+    luks->secret = g_strdup(options->u.luks.key_secret);
+
     password = qcrypto_secret_lookup_as_utf8(luks_opts.key_secret, errp);
     if (!password) {
         goto error;
@@ -1471,10 +1595,283 @@ qcrypto_block_luks_create(QCryptoBlock *block,
     qcrypto_block_free_cipher(block);
     qcrypto_ivgen_free(block->ivgen);
 
+    g_free(luks->secret);
     g_free(luks);
     return -1;
 }
 
+/*
+ * Given LUKSKeyslotUpdate command, set @slots_bitmap with all slots
+ * that will be updated with new password (or erased)
+ * returns 0 on success, and -1 on failure
+ */
+static int
+qcrypto_block_luks_get_update_bitmap(QCryptoBlock *block,
+                                     QCryptoBlockReadFunc readfunc,
+                                     void *opaque,
+                                     const QCryptoBlockAmendOptionsLUKS *opts,
+                                     unsigned long *slots_bitmap,
+                                     Error **errp)
+{
+    const QCryptoBlockLUKS *luks = block->opaque;
+    size_t i;
+
+    bitmap_zero(slots_bitmap, QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
+
+    if (opts->has_keyslot) {
+        /* keyslot set, select only this keyslot */
+        int keyslot = opts->keyslot;
+
+        if (keyslot < 0 || keyslot >= QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS) {
+            error_setg(errp,
+                       "Invalid slot %u specified, must be between 0 and %u",
+                       keyslot, QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS - 1);
+            return -1;
+        }
+        bitmap_set(slots_bitmap, keyslot, 1);
+
+    } else if (opts->has_old_secret) {
+        /* initially select all active keyslots */
+        for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+            if (qcrypto_block_luks_slot_active(luks, i)) {
+                bitmap_set(slots_bitmap, i, 1);
+            }
+        }
+    } else {
+        /* find a free keyslot */
+        int slot = qcrypto_block_luks_find_free_keyslot(luks);
+
+        if (slot == -1) {
+            error_setg(errp,
+                       "Can't add a keyslot - all key slots are in use");
+            return -1;
+        }
+        bitmap_set(slots_bitmap, slot, 1);
+    }
+
+    if (opts->has_old_secret) {
+        /* now deselect all keyslots that don't contain the password */
+        g_autofree uint8_t *tmpkey = g_new0(uint8_t,
+                                            luks->header.master_key_len);
+
+        for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+            g_autofree char *old_password = NULL;
+            int rv;
+
+            if (!test_bit(i, slots_bitmap)) {
+                continue;
+            }
+
+            old_password = qcrypto_secret_lookup_as_utf8(opts->old_secret,
+                                                         errp);
+            if (!old_password) {
+                return -1;
+            }
+
+            rv = qcrypto_block_luks_load_key(block,
+                                             i,
+                                             old_password,
+                                             tmpkey,
+                                             readfunc,
+                                             opaque,
+                                             errp);
+            if (rv == -1) {
+                return -1;
+            } else if (rv == 0) {
+                bitmap_clear(slots_bitmap, i, 1);
+            }
+        }
+    }
+    return 0;
+}
+
+/*
+ * Erase a set of keyslots given in @slots_bitmap
+ */
+static int qcrypto_block_luks_erase_keys(QCryptoBlock *block,
+                                         QCryptoBlockReadFunc readfunc,
+                                         QCryptoBlockWriteFunc writefunc,
+                                         void *opaque,
+                                         unsigned long *slots_bitmap,
+                                         bool force,
+                                         Error **errp)
+{
+    QCryptoBlockLUKS *luks = block->opaque;
+    long slot_count = bitmap_count_one(slots_bitmap,
+                                       QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
+    size_t i;
+
+    /* safety checks */
+    if (!force && slot_count == qcrypto_block_luks_count_active_slots(luks)) {
+        error_setg(errp,
+                   "Requested operation will erase all active keyslots"
+                   " which will erase all the data in the image"
+                   " irreversibly - refusing operation");
+        return -EINVAL;
+    }
+
+    /* new apply the update */
+    for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+        if (!test_bit(i, slots_bitmap)) {
+            continue;
+        }
+        if (qcrypto_block_luks_erase_key(block, i, writefunc, opaque, errp)) {
+            error_append_hint(errp, "Failed to erase keyslot %zu", i);
+            return -EINVAL;
+        }
+    }
+    return 0;
+}
+
+/*
+ * Set a set of keyslots to @master_key encrypted by @new_secret
+ */
+static int qcrypto_block_luks_set_keys(QCryptoBlock *block,
+                                       QCryptoBlockReadFunc readfunc,
+                                       QCryptoBlockWriteFunc writefunc,
+                                       void *opaque,
+                                       unsigned long *slots_bitmap,
+                                       uint8_t *master_key,
+                                       uint64_t iter_time,
+                                       char *new_secret,
+                                       bool force,
+                                       Error **errp)
+{
+    QCryptoBlockLUKS *luks = block->opaque;
+    g_autofree char *new_password = NULL;
+    size_t i;
+
+    /* safety checks */
+    if (!force) {
+        for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+            if (!test_bit(i, slots_bitmap)) {
+                continue;
+            }
+            if (qcrypto_block_luks_slot_active(luks, i)) {
+                error_setg(errp,
+                           "Refusing to overwrite active slot %zu - "
+                           "please erase it first", i);
+                return -EINVAL;
+            }
+        }
+    }
+
+    /* Load the new password */
+    new_password = qcrypto_secret_lookup_as_utf8(new_secret, errp);
+    if (!new_password) {
+        return -EINVAL;
+    }
+
+    /* Apply the update */
+    for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
+        if (!test_bit(i, slots_bitmap)) {
+            continue;
+        }
+        if (qcrypto_block_luks_store_key(block, i, new_password, master_key,
+                                         iter_time, writefunc, opaque, errp)) {
+            error_append_hint(errp, "Failed to write to keyslot %zu", i);
+            return -EINVAL;
+        }
+    }
+    return 0;
+}
+
+static int
+qcrypto_block_luks_amend_options(QCryptoBlock *block,
+                                 QCryptoBlockReadFunc readfunc,
+                                 QCryptoBlockWriteFunc writefunc,
+                                 void *opaque,
+                                 QCryptoBlockAmendOptions *options,
+                                 bool force,
+                                 Error **errp)
+{
+    QCryptoBlockLUKS *luks = block->opaque;
+    QCryptoBlockAmendOptionsLUKS *opts_luks = &options->u.luks;
+    g_autofree uint8_t *master_key = NULL;
+    g_autofree unsigned long *update_bitmap = NULL;
+    char *secret = opts_luks->has_secret ? opts_luks->secret : luks->secret;
+    long slot_count;
+
+    /* Retrieve set of slots that we need to update */
+    update_bitmap = bitmap_new(QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
+    if (qcrypto_block_luks_get_update_bitmap(block, readfunc, opaque, opts_luks,
+                                             update_bitmap, errp) != 0) {
+        return -1;
+    }
+
+    slot_count = bitmap_count_one(update_bitmap,
+                                  QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
+
+    /* no matching slots, so nothing to do */
+    if (slot_count == 0) {
+        error_setg(errp, "Requested operation didn't match any slots");
+        return -1;
+    }
+
+    if (opts_luks->state == Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE_ACTIVE) {
+
+        uint64_t iter_time = opts_luks->has_iter_time ?
+                             opts_luks->iter_time :
+                             QCRYPTO_BLOCK_LUKS_DEFAULT_ITER_TIME_MS;
+
+        if (!opts_luks->has_new_secret) {
+            error_setg(errp, "'new-secret' is required to activate a keyslot");
+            return -1;
+        }
+        if (opts_luks->has_old_secret) {
+            error_setg(errp,
+                       "'old-secret' must not be given when activating keyslots");
+            return -1;
+        }
+
+        /* Locate the password that will be used to retrieve the master key */
+        g_autofree char *old_password;
+        old_password = qcrypto_secret_lookup_as_utf8(secret,  errp);
+        if (!old_password) {
+            return -1;
+        }
+
+        /* Try to retrieve the master key */
+        master_key = g_new0(uint8_t, luks->header.master_key_len);
+        if (qcrypto_block_luks_find_key(block, old_password, master_key,
+                                        readfunc, opaque, errp) < 0) {
+            error_append_hint(errp, "Failed to retrieve the master key");
+            return -1;
+        }
+
+        /* Now set the new keyslots */
+        if (qcrypto_block_luks_set_keys(block, readfunc, writefunc,
+                                        opaque, update_bitmap, master_key,
+                                        iter_time,
+                                        opts_luks->new_secret,
+                                        force, errp) != 0) {
+            return -1;
+        }
+    } else {
+        if (opts_luks->has_new_secret) {
+            error_setg(errp,
+                       "'new-secret' must not be given when erasing keyslots");
+            return -1;
+        }
+        if (opts_luks->has_iter_time) {
+            error_setg(errp,
+                       "'iter-time' must not be given when erasing keyslots");
+            return -1;
+        }
+        if (opts_luks->has_secret) {
+            error_setg(errp,
+                       "'secret' must not be given when erasing keyslots");
+            return -1;
+        }
+
+        if (qcrypto_block_luks_erase_keys(block, readfunc, writefunc,
+                                          opaque, update_bitmap, force,
+                                          errp) != 0) {
+            return -1;
+        }
+    }
+    return 0;
+}
 
 static int qcrypto_block_luks_get_info(QCryptoBlock *block,
                                        QCryptoBlockInfo *info,
@@ -1523,7 +1920,11 @@ static int qcrypto_block_luks_get_info(QCryptoBlock *block,
 
 static void qcrypto_block_luks_cleanup(QCryptoBlock *block)
 {
-    g_free(block->opaque);
+    QCryptoBlockLUKS *luks = block->opaque;
+    if (luks) {
+        g_free(luks->secret);
+        g_free(luks);
+    }
 }
 
 
@@ -1560,6 +1961,7 @@ qcrypto_block_luks_encrypt(QCryptoBlock *block,
 const QCryptoBlockDriver qcrypto_block_driver_luks = {
     .open = qcrypto_block_luks_open,
     .create = qcrypto_block_luks_create,
+    .amend = qcrypto_block_luks_amend_options,
     .get_info = qcrypto_block_luks_get_info,
     .cleanup = qcrypto_block_luks_cleanup,
     .decrypt = qcrypto_block_luks_decrypt,
qapi/crypto.json +59 -2

83 lines not on this page · raw message

Signature · 1 line
2.17.2
#3 lore raw

PATCH v3 3/14 block/amend: add 'force' option

In reply to Maxim Levitsky

'force' option will be used for some unsafe amend operations.

This includes things like erasing last keyslot in luks based formats (which destroys the data, unless the master key is backed up by external means), but that _might_ be desired result.

---
 block.c                   | 4 +++-
 block/qcow2.c             | 1 +
 docs/tools/qemu-img.rst   | 5 ++++-
 include/block/block.h     | 1 +
 include/block/block_int.h | 1 +
 qemu-img-cmds.hx          | 4 ++--
 qemu-img.c                | 8 +++++++-
 7 files changed, 19 insertions(+), 5 deletions(-)
block.c +3 -1
index 301ec588bd..fe692202a9 100644
@@ -6377,6 +6377,7 @@ void bdrv_remove_aio_context_notifier(BlockDriverState *bs,
 
 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts,
                        BlockDriverAmendStatusCB *status_cb, void *cb_opaque,
+                       bool force,
                        Error **errp)
 {
     if (!bs->drv) {
@@ -6388,7 +6389,8 @@ int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts,
                    bs->drv->format_name);
         return -ENOTSUP;
     }
-    return bs->drv->bdrv_amend_options(bs, opts, status_cb, cb_opaque, errp);
+    return bs->drv->bdrv_amend_options(bs, opts, status_cb,
+                                       cb_opaque, force, errp);
 }
 
 /*
block/qcow2.c +1 -0
index 2ba0b17c39..ffb6b22e2d 100644
@@ -5200,6 +5200,7 @@ static void qcow2_amend_helper_cb(BlockDriverState *bs,
 static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
                                BlockDriverAmendStatusCB *status_cb,
                                void *cb_opaque,
+                               bool force,
                                Error **errp)
 {
     BDRVQcow2State *s = bs->opaque;
docs/tools/qemu-img.rst +4 -1
index 0080f83a76..fc2dca6649 100644
@@ -249,11 +249,14 @@ Command description:
 
 .. program:: qemu-img-commands
 
-.. option:: amend [--object OBJECTDEF] [--image-opts] [-p] [-q] [-f FMT] [-t CACHE] -o OPTIONS FILENAME
+.. option:: amend [--object OBJECTDEF] [--image-opts] [-p] [-q] [-f FMT] [-t CACHE] [--force] -o OPTIONS FILENAME
 
   Amends the image format specific *OPTIONS* for the image file
   *FILENAME*. Not all file formats support this operation.
 
+  --force allows some unsafe operations. Currently for -f luks, it allows to
+  erase last encryption key, and to overwrite an active encryption key.
+
 .. option:: bench [-c COUNT] [-d DEPTH] [-f FMT] [--flush-interval=FLUSH_INTERVAL] [-i AIO] [-n] [--no-drain] [-o OFFSET] [--pattern=PATTERN] [-q] [-s BUFFER_SIZE] [-S STEP_SIZE] [-t CACHE] [-w] [-U] FILENAME
 
   Run a simple sequential I/O benchmark on the specified image. If ``-w`` is
include/block/block.h +1 -0
index 8b62429aa4..0ca53b5598 100644
@@ -392,6 +392,7 @@ typedef void BlockDriverAmendStatusCB(BlockDriverState *bs, int64_t offset,
                                       int64_t total_work_size, void *opaque);
 int bdrv_amend_options(BlockDriverState *bs_new, QemuOpts *opts,
                        BlockDriverAmendStatusCB *status_cb, void *cb_opaque,
+                       bool force,
                        Error **errp);
 
 /* check if a named node can be replaced when doing drive-mirror */
include/block/block_int.h +1 -0
index 92335f33c7..98671ecdf6 100644
@@ -432,6 +432,7 @@ struct BlockDriver {
     int (*bdrv_amend_options)(BlockDriverState *bs, QemuOpts *opts,
                               BlockDriverAmendStatusCB *status_cb,
                               void *cb_opaque,
+                              bool force,
                               Error **errp);
 
     void (*bdrv_debug_event)(BlockDriverState *bs, BlkdebugEvent event);
qemu-img-cmds.hx +2 -2
index c9c54de1df..9920f1f9d4 100644
@@ -10,9 +10,9 @@ HXCOMM When amending the rST sections, please remember to copy the usage
 HXCOMM over to the per-command sections in qemu-img.texi.
 
 DEF("amend", img_amend,
-    "amend [--object objectdef] [--image-opts] [-p] [-q] [-f fmt] [-t cache] -o options filename")
+    "amend [--object objectdef] [--image-opts] [-p] [-q] [-f fmt] [-t cache] [--force] -o options filename")
 SRST
-.. option:: amend [--object OBJECTDEF] [--image-opts] [-p] [-q] [-f FMT] [-t CACHE] -o OPTIONS FILENAME
+.. option:: amend [--object OBJECTDEF] [--image-opts] [-p] [-q] [-f FMT] [-t CACHE] [--force] -o OPTIONS FILENAME
 ERST
 
 DEF("bench", img_bench,
qemu-img.c +7 -1
index 6a4327aaba..ef422d5471 100644
@@ -71,6 +71,7 @@ enum {
     OPTION_SHRINK = 266,
     OPTION_SALVAGE = 267,
     OPTION_TARGET_IS_ZERO = 268,
+    OPTION_FORCE = 269,
 };
 
 typedef enum OutputFormat {
@@ -3958,6 +3959,7 @@ static int img_amend(int argc, char **argv)
     BlockBackend *blk = NULL;
     BlockDriverState *bs = NULL;
     bool image_opts = false;
+    bool force = false;
 
     cache = BDRV_DEFAULT_CACHE;
     for (;;) {
@@ -3965,6 +3967,7 @@ static int img_amend(int argc, char **argv)
             {"help", no_argument, 0, 'h'},
             {"object", required_argument, 0, OPTION_OBJECT},
             {"image-opts", no_argument, 0, OPTION_IMAGE_OPTS},
+            {"force", no_argument, 0, OPTION_FORCE},
             {0, 0, 0, 0}
         };
         c = getopt_long(argc, argv, ":ho:f:t:pq",
@@ -4012,6 +4015,9 @@ static int img_amend(int argc, char **argv)
         case OPTION_IMAGE_OPTS:
             image_opts = true;
             break;
+        case OPTION_FORCE:
+            force = true;
+            break;
         }
     }
 
@@ -4089,7 +4095,7 @@ static int img_amend(int argc, char **argv)
 
     /* In case the driver does not call amend_status_cb() */
     qemu_progress_print(0.f, 0);
-    ret = bdrv_amend_options(bs, opts, &amend_status_cb, NULL, &err);
+    ret = bdrv_amend_options(bs, opts, &amend_status_cb, NULL, force, &err);
     qemu_progress_print(100.f, 0);
     if (ret < 0) {
         error_report_err(err);
Signature · 1 line
2.17.2
#4 lore raw

PATCH v3 4/14 block/amend: separate amend and create options for qemu-img

In reply to Maxim Levitsky

Some options are only useful for creation
(or hard to be amended, like cluster size for qcow2), while some other options are only useful for amend, like upcoming keyslot management options for luks

Since currently only qcow2 supports amend, move all its options to a common macro and then include it in each action option list.

In future it might be useful to remove some options which are not supported anyway from amend list, which currently cause an error message if amended.

---
 block/qcow2.c             | 160 +++++++++++++++++++++-----------------
 include/block/block_int.h |   4 +
 qemu-img.c                |  18 ++---
 3 files changed, 100 insertions(+), 82 deletions(-)
block/qcow2.c +87 -73
index ffb6b22e2d..13780b0278 100644
@@ -5495,83 +5495,96 @@ void qcow2_signal_corruption(BlockDriverState *bs, bool fatal, int64_t offset,
     s->signaled_corruption = true;
 }
 
+#define QCOW_COMMON_OPTIONS                                         \
+    {                                                               \
+        .name = BLOCK_OPT_SIZE,                                     \
+        .type = QEMU_OPT_SIZE,                                      \
+        .help = "Virtual disk size"                                 \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_COMPAT_LEVEL,                             \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Compatibility level (v2 [0.10] or v3 [1.1])"       \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_BACKING_FILE,                             \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "File name of a base image"                         \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_BACKING_FMT,                              \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Image format of the base image"                    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_DATA_FILE,                                \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "File name of an external data file"                \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_DATA_FILE_RAW,                            \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "The external data file must stay valid "           \
+                "as a raw image"                                    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_ENCRYPT,                                  \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "Encrypt the image with format 'aes'. (Deprecated " \
+                "in favor of " BLOCK_OPT_ENCRYPT_FORMAT "=aes)",    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_ENCRYPT_FORMAT,                           \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Encrypt the image, format choices: 'aes', 'luks'", \
+    },                                                              \
+    BLOCK_CRYPTO_OPT_DEF_KEY_SECRET("encrypt.",                     \
+        "ID of secret providing qcow AES key or LUKS passphrase"),  \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG("encrypt."),               \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE("encrypt."),              \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG("encrypt."),                \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."),           \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."),                 \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),                \
+    {                                                               \
+        .name = BLOCK_OPT_CLUSTER_SIZE,                             \
+        .type = QEMU_OPT_SIZE,                                      \
+        .help = "qcow2 cluster size",                               \
+        .def_value_str = stringify(DEFAULT_CLUSTER_SIZE)            \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_PREALLOC,                                 \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Preallocation mode (allowed values: off, "         \
+                "metadata, falloc, full)"                           \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_LAZY_REFCOUNTS,                           \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "Postpone refcount updates",                        \
+        .def_value_str = "off"                                      \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_REFCOUNT_BITS,                            \
+        .type = QEMU_OPT_NUMBER,                                    \
+        .help = "Width of a reference count entry in bits",         \
+        .def_value_str = "16"                                       \
+    }                                                               \
+
 static QemuOptsList qcow2_create_opts = {
     .name = "qcow2-create-opts",
     .head = QTAILQ_HEAD_INITIALIZER(qcow2_create_opts.head),
     .desc = {
-        {
-            .name = BLOCK_OPT_SIZE,
-            .type = QEMU_OPT_SIZE,
-            .help = "Virtual disk size"
-        },
-        {
-            .name = BLOCK_OPT_COMPAT_LEVEL,
-            .type = QEMU_OPT_STRING,
-            .help = "Compatibility level (v2 [0.10] or v3 [1.1])"
-        },
-        {
-            .name = BLOCK_OPT_BACKING_FILE,
-            .type = QEMU_OPT_STRING,
-            .help = "File name of a base image"
-        },
-        {
-            .name = BLOCK_OPT_BACKING_FMT,
-            .type = QEMU_OPT_STRING,
-            .help = "Image format of the base image"
-        },
-        {
-            .name = BLOCK_OPT_DATA_FILE,
-            .type = QEMU_OPT_STRING,
-            .help = "File name of an external data file"
-        },
-        {
-            .name = BLOCK_OPT_DATA_FILE_RAW,
-            .type = QEMU_OPT_BOOL,
-            .help = "The external data file must stay valid as a raw image"
-        },
-        {
-            .name = BLOCK_OPT_ENCRYPT,
-            .type = QEMU_OPT_BOOL,
-            .help = "Encrypt the image with format 'aes'. (Deprecated "
-                    "in favor of " BLOCK_OPT_ENCRYPT_FORMAT "=aes)",
-        },
-        {
-            .name = BLOCK_OPT_ENCRYPT_FORMAT,
-            .type = QEMU_OPT_STRING,
-            .help = "Encrypt the image, format choices: 'aes', 'luks'",
-        },
-        BLOCK_CRYPTO_OPT_DEF_KEY_SECRET("encrypt.",
-            "ID of secret providing qcow AES key or LUKS passphrase"),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG("encrypt."),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE("encrypt."),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG("encrypt."),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."),
-        BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),
-        {
-            .name = BLOCK_OPT_CLUSTER_SIZE,
-            .type = QEMU_OPT_SIZE,
-            .help = "qcow2 cluster size",
-            .def_value_str = stringify(DEFAULT_CLUSTER_SIZE)
-        },
-        {
-            .name = BLOCK_OPT_PREALLOC,
-            .type = QEMU_OPT_STRING,
-            .help = "Preallocation mode (allowed values: off, metadata, "
-                    "falloc, full)"
-        },
-        {
-            .name = BLOCK_OPT_LAZY_REFCOUNTS,
-            .type = QEMU_OPT_BOOL,
-            .help = "Postpone refcount updates",
-            .def_value_str = "off"
-        },
-        {
-            .name = BLOCK_OPT_REFCOUNT_BITS,
-            .type = QEMU_OPT_NUMBER,
-            .help = "Width of a reference count entry in bits",
-            .def_value_str = "16"
-        },
+        QCOW_COMMON_OPTIONS,
+        { /* end of list */ }
+    }
+};
+
+static QemuOptsList qcow2_amend_opts = {
+    .name = "qcow2-amend-opts",
+    .head = QTAILQ_HEAD_INITIALIZER(qcow2_amend_opts.head),
+    .desc = {
+        QCOW_COMMON_OPTIONS,
         { /* end of list */ }
     }
 };
@@ -5632,6 +5645,7 @@ BlockDriver bdrv_qcow2 = {
     .bdrv_inactivate            = qcow2_inactivate,
 
     .create_opts         = &qcow2_create_opts,
+    .amend_opts          = &qcow2_amend_opts,
     .strong_runtime_opts = qcow2_strong_runtime_opts,
     .mutable_opts        = mutable_opts,
     .bdrv_co_check       = qcow2_co_check,
include/block/block_int.h +4 -0
index 98671ecdf6..1f0524285d 100644
@@ -412,6 +412,10 @@ struct BlockDriver {
 
     /* List of options for creating images, terminated by name == NULL */
     QemuOptsList *create_opts;
+
+    /* List of options for image amend*/
+    QemuOptsList *amend_opts;
+
     /*
      * If this driver supports reopening images this contains a
      * NULL-terminated list of the runtime options that can be
qemu-img.c +9 -9
index ef422d5471..8f69366f03 100644
@@ -3936,11 +3936,11 @@ static int print_amend_option_help(const char *format)
         return 1;
     }
 
-    /* Every driver supporting amendment must have create_opts */
-    assert(drv->create_opts);
+    /* Every driver supporting amendment must have amend_opts */
+    assert(drv->amend_opts);
 
     printf("Creation options for '%s':\n", format);
-    qemu_opts_print_help(drv->create_opts, false);
+    qemu_opts_print_help(drv->amend_opts, false);
     printf("\nNote that not all of these options may be amendable.\n");
     return 0;
 }
@@ -3950,7 +3950,7 @@ static int img_amend(int argc, char **argv)
     Error *err = NULL;
     int c, ret = 0;
     char *options = NULL;
-    QemuOptsList *create_opts = NULL;
+    QemuOptsList *amend_opts = NULL;
     QemuOpts *opts = NULL;
     const char *fmt = NULL, *filename, *cache;
     int flags;
@@ -4081,11 +4081,11 @@ static int img_amend(int argc, char **argv)
         goto out;
     }
 
-    /* Every driver supporting amendment must have create_opts */
-    assert(bs->drv->create_opts);
+    /* Every driver supporting amendment must have amend_opts */
+    assert(bs->drv->amend_opts);
 
-    create_opts = qemu_opts_append(create_opts, bs->drv->create_opts);
-    opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
+    amend_opts = qemu_opts_append(amend_opts, bs->drv->amend_opts);
+    opts = qemu_opts_create(amend_opts, NULL, 0, &error_abort);
     qemu_opts_do_parse(opts, options, NULL, &err);
     if (err) {
         error_report_err(err);
@@ -4108,7 +4108,7 @@ out:
 out_no_progress:
     blk_unref(blk);
     qemu_opts_del(opts);
-    qemu_opts_free(create_opts);
+    qemu_opts_free(amend_opts);
     g_free(options);
 
     if (ret) {
Signature · 1 line
2.17.2
#5 lore raw

PATCH v3 5/14 block/amend: refactor qcow2 amend options

In reply to Maxim Levitsky

Some qcow2 create options can't be used for amend.
Remove them from the qcow2 create options and add generic logic to detect such options in qemu-img

---
 block/qcow2.c              | 108 ++++++---------------
 qemu-img.c                 |  18 +++-
 tests/qemu-iotests/049.out | 102 ++++++++++----------
 tests/qemu-iotests/061.out |  12 ++-
 tests/qemu-iotests/079.out |  18 ++--
 tests/qemu-iotests/082.out | 149 ++++------------------------
 tests/qemu-iotests/085.out |  38 ++++----
 tests/qemu-iotests/087.out |   6 +-
 tests/qemu-iotests/115.out |   2 +-
 tests/qemu-iotests/121.out |   4 +-
 tests/qemu-iotests/125.out | 192 ++++++++++++++++++-------------------
 tests/qemu-iotests/134.out |   2 +-
 tests/qemu-iotests/144.out |   4 +-
 tests/qemu-iotests/158.out |   4 +-
 tests/qemu-iotests/182.out |   2 +-
 tests/qemu-iotests/185.out |   8 +-
 tests/qemu-iotests/188.out |   2 +-
 tests/qemu-iotests/189.out |   4 +-
 tests/qemu-iotests/198.out |   4 +-
 tests/qemu-iotests/243.out |  16 ++--
 tests/qemu-iotests/250.out |   2 +-
 tests/qemu-iotests/255.out |   8 +-
 tests/qemu-iotests/263.out |   4 +-
 tests/qemu-iotests/280.out |   2 +-
 24 files changed, 283 insertions(+), 428 deletions(-)
block/qcow2.c +31 -77
index 13780b0278..e6c4d0b0b4 100644
@@ -2971,17 +2971,6 @@ static int qcow2_change_backing_file(BlockDriverState *bs,
     return qcow2_update_header(bs);
 }
 
-static int qcow2_crypt_method_from_format(const char *encryptfmt)
-{
-    if (g_str_equal(encryptfmt, "luks")) {
-        return QCOW_CRYPT_LUKS;
-    } else if (g_str_equal(encryptfmt, "aes")) {
-        return QCOW_CRYPT_AES;
-    } else {
-        return -EINVAL;
-    }
-}
-
 static int qcow2_set_up_encryption(BlockDriverState *bs,
                                    QCryptoBlockCreateOptions *cryptoopts,
                                    Error **errp)
@@ -5210,9 +5199,6 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
     bool lazy_refcounts = s->use_lazy_refcounts;
     bool data_file_raw = data_file_is_raw(bs);
     const char *compat = NULL;
-    uint64_t cluster_size = s->cluster_size;
-    bool encrypt;
-    int encformat;
     int refcount_bits = s->refcount_bits;
     int ret;
     QemuOptDesc *desc = opts->list->desc;
@@ -5237,44 +5223,12 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
                 error_setg(errp, "Unknown compatibility level %s", compat);
                 return -EINVAL;
             }
-        } else if (!strcmp(desc->name, BLOCK_OPT_PREALLOC)) {
-            error_setg(errp, "Cannot change preallocation mode");
-            return -ENOTSUP;
         } else if (!strcmp(desc->name, BLOCK_OPT_SIZE)) {
             new_size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
         } else if (!strcmp(desc->name, BLOCK_OPT_BACKING_FILE)) {
             backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
         } else if (!strcmp(desc->name, BLOCK_OPT_BACKING_FMT)) {
             backing_format = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
-        } else if (!strcmp(desc->name, BLOCK_OPT_ENCRYPT)) {
-            encrypt = qemu_opt_get_bool(opts, BLOCK_OPT_ENCRYPT,
-                                        !!s->crypto);
-
-            if (encrypt != !!s->crypto) {
-                error_setg(errp,
-                           "Changing the encryption flag is not supported");
-                return -ENOTSUP;
-            }
-        } else if (!strcmp(desc->name, BLOCK_OPT_ENCRYPT_FORMAT)) {
-            encformat = qcow2_crypt_method_from_format(
-                qemu_opt_get(opts, BLOCK_OPT_ENCRYPT_FORMAT));
-
-            if (encformat != s->crypt_method_header) {
-                error_setg(errp,
-                           "Changing the encryption format is not supported");
-                return -ENOTSUP;
-            }
-        } else if (g_str_has_prefix(desc->name, "encrypt.")) {
-            error_setg(errp,
-                       "Changing the encryption parameters is not supported");
-            return -ENOTSUP;
-        } else if (!strcmp(desc->name, BLOCK_OPT_CLUSTER_SIZE)) {
-            cluster_size = qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE,
-                                             cluster_size);
-            if (cluster_size != s->cluster_size) {
-                error_setg(errp, "Changing the cluster size is not supported");
-                return -ENOTSUP;
-            }
         } else if (!strcmp(desc->name, BLOCK_OPT_LAZY_REFCOUNTS)) {
             lazy_refcounts = qemu_opt_get_bool(opts, BLOCK_OPT_LAZY_REFCOUNTS,
                                                lazy_refcounts);
@@ -5527,37 +5481,6 @@ void qcow2_signal_corruption(BlockDriverState *bs, bool fatal, int64_t offset,
         .help = "The external data file must stay valid "           \
                 "as a raw image"                                    \
     },                                                              \
-    {                                                               \
-        .name = BLOCK_OPT_ENCRYPT,                                  \
-        .type = QEMU_OPT_BOOL,                                      \
-        .help = "Encrypt the image with format 'aes'. (Deprecated " \
-                "in favor of " BLOCK_OPT_ENCRYPT_FORMAT "=aes)",    \
-    },                                                              \
-    {                                                               \
-        .name = BLOCK_OPT_ENCRYPT_FORMAT,                           \
-        .type = QEMU_OPT_STRING,                                    \
-        .help = "Encrypt the image, format choices: 'aes', 'luks'", \
-    },                                                              \
-    BLOCK_CRYPTO_OPT_DEF_KEY_SECRET("encrypt.",                     \
-        "ID of secret providing qcow AES key or LUKS passphrase"),  \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG("encrypt."),               \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE("encrypt."),              \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG("encrypt."),                \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."),           \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."),                 \
-    BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),                \
-    {                                                               \
-        .name = BLOCK_OPT_CLUSTER_SIZE,                             \
-        .type = QEMU_OPT_SIZE,                                      \
-        .help = "qcow2 cluster size",                               \
-        .def_value_str = stringify(DEFAULT_CLUSTER_SIZE)            \
-    },                                                              \
-    {                                                               \
-        .name = BLOCK_OPT_PREALLOC,                                 \
-        .type = QEMU_OPT_STRING,                                    \
-        .help = "Preallocation mode (allowed values: off, "         \
-                "metadata, falloc, full)"                           \
-    },                                                              \
     {                                                               \
         .name = BLOCK_OPT_LAZY_REFCOUNTS,                           \
         .type = QEMU_OPT_BOOL,                                      \
@@ -5575,6 +5498,37 @@ static QemuOptsList qcow2_create_opts = {
     .name = "qcow2-create-opts",
     .head = QTAILQ_HEAD_INITIALIZER(qcow2_create_opts.head),
     .desc = {
+        {                                                               \
+            .name = BLOCK_OPT_ENCRYPT,                                  \
+            .type = QEMU_OPT_BOOL,                                      \
+            .help = "Encrypt the image with format 'aes'. (Deprecated " \
+                    "in favor of " BLOCK_OPT_ENCRYPT_FORMAT "=aes)",    \
+        },                                                              \
+        {                                                               \
+            .name = BLOCK_OPT_ENCRYPT_FORMAT,                           \
+            .type = QEMU_OPT_STRING,                                    \
+            .help = "Encrypt the image, format choices: 'aes', 'luks'", \
+        },                                                              \
+        BLOCK_CRYPTO_OPT_DEF_KEY_SECRET("encrypt.",                     \
+            "ID of secret providing qcow AES key or LUKS passphrase"),  \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG("encrypt."),               \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE("encrypt."),              \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG("encrypt."),                \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."),           \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."),                 \
+        BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),                \
+        {                                                               \
+            .name = BLOCK_OPT_CLUSTER_SIZE,                             \
+            .type = QEMU_OPT_SIZE,                                      \
+            .help = "qcow2 cluster size",                               \
+            .def_value_str = stringify(DEFAULT_CLUSTER_SIZE)            \
+        },                                                              \
+        {                                                               \
+            .name = BLOCK_OPT_PREALLOC,                                 \
+            .type = QEMU_OPT_STRING,                                    \
+            .help = "Preallocation mode (allowed values: off, "         \
+                    "metadata, falloc, full)"                           \
+        },                                                              \
         QCOW_COMMON_OPTIONS,
         { /* end of list */ }
     }
qemu-img.c +16 -2
index 8f69366f03..b291081249 100644
@@ -3939,9 +3939,8 @@ static int print_amend_option_help(const char *format)
     /* Every driver supporting amendment must have amend_opts */
     assert(drv->amend_opts);
 
-    printf("Creation options for '%s':\n", format);
+    printf("Amend options for '%s':\n", format);
     qemu_opts_print_help(drv->amend_opts, false);
-    printf("\nNote that not all of these options may be amendable.\n");
     return 0;
 }
 
@@ -4087,7 +4086,22 @@ static int img_amend(int argc, char **argv)
     amend_opts = qemu_opts_append(amend_opts, bs->drv->amend_opts);
     opts = qemu_opts_create(amend_opts, NULL, 0, &error_abort);
     qemu_opts_do_parse(opts, options, NULL, &err);
+
     if (err) {
+        /* Try to parse options using the create options*/
+        Error *err1 = NULL;
+        amend_opts = qemu_opts_append(amend_opts, bs->drv->create_opts);
+        qemu_opts_del(opts);
+        opts = qemu_opts_create(amend_opts, NULL, 0, &error_abort);
+        qemu_opts_do_parse(opts, options, NULL, &err1);
+
+        if (!err1) {
+            error_append_hint(&err,
+                              "This option is only supported for image creation\n");
+        } else {
+            error_free(err1);
+        }
+
         error_report_err(err);
         ret = -1;
         goto out;
tests/qemu-iotests/049.out +51 -51

225 lines not on this page · raw message

tests/qemu-iotests/061.out +8 -4
index 413cc4e0f4..15480aafa1 100644
@@ -353,16 +353,20 @@ qemu-img: Lazy refcounts only supported with compatibility level 1.1 and above (
 qemu-img: Lazy refcounts only supported with compatibility level 1.1 and above (use compat=1.1 or greater)
 qemu-img: Unknown compatibility level 0.42
 qemu-img: Invalid parameter 'foo'
-qemu-img: Changing the cluster size is not supported
-qemu-img: Changing the encryption flag is not supported
-qemu-img: Cannot change preallocation mode
+qemu-img: Invalid parameter 'cluster_size'
+This option is only supported for image creation
+qemu-img: Invalid parameter 'encryption'
+This option is only supported for image creation
+qemu-img: Invalid parameter 'preallocation'
+This option is only supported for image creation
 
 === Testing correct handling of unset value ===
 
 Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
 Should work:
 Should not work:
-qemu-img: Changing the cluster size is not supported
+qemu-img: Invalid parameter 'cluster_size'
+This option is only supported for image creation
 
 === Testing zero expansion on inactive clusters ===
 
tests/qemu-iotests/079.out +9 -9
index aab922fb36..c7e37152f4 100644
@@ -1,14 +1,14 @@
 QA output created by 079
 === Check option preallocation and cluster_size ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
 qemu-img: TEST_DIR/t.IMGFMT: Cluster size must be a power of two between 512 and 2048k
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=4294967296
 *** done
tests/qemu-iotests/082.out +16 -133

287 lines not on this page · raw message

tests/qemu-iotests/085.out +19 -19
index fd11aae678..39a950a8ad 100644
@@ -13,7 +13,7 @@ Formatting 'TEST_DIR/t.IMGFMT.2', fmt=IMGFMT size=134217728
 === Create a single snapshot on virtio0 ===
 
 { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
-Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.1 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/t.qcow2.1 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 
 === Invalid command - missing device and nodename ===
@@ -30,40 +30,40 @@ Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file
 === Create several transactional group snapshots ===
 
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/2-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/2-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/1-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/1-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/t.qcow2.2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/3-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/3-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/2-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/2-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/4-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/4-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/4-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/4-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/4-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/3-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/4-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/3-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/5-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/5-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/5-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/5-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/5-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/4-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/5-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/4-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/6-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/6-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/6-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/6-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/6-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/5-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/6-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/5-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/7-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/7-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/7-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/7-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/7-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/6-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/7-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/6-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/8-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/8-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/8-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/8-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/8-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/7-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/8-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/7-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/9-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/9-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/9-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/9-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/8-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/8-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/10-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/10-snapshot-v1.IMGFMT' } } ] } }
-Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
-Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/9-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 backing_file=TEST_DIR/9-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 
 === Create a couple of snapshots using blockdev-snapshot ===
tests/qemu-iotests/087.out +3 -3
index 2d92ea847b..f23bffbbf1 100644
@@ -34,7 +34,7 @@ QMP_VERSION
 
 === Encrypted image QCow ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
 Testing:
 QMP_VERSION
 {"return": {}}
@@ -46,7 +46,7 @@ QMP_VERSION
 
 === Encrypted image LUKS ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encrypt.format=luks encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 size=134217728
 Testing:
 QMP_VERSION
 {"return": {}}
@@ -58,7 +58,7 @@ QMP_VERSION
 
 === Missing driver ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
 Testing: -S
 QMP_VERSION
 {"return": {}}
tests/qemu-iotests/115.out +1 -1
index dbdad17b27..074b5cc84d 100644
@@ -2,7 +2,7 @@ QA output created by 115
 
 === Testing large refcount and L1 table ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=268435456 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=268435456
 No errors were found on the image.
 100.00% allocated clusters
 *** done
tests/qemu-iotests/121.out +2 -2
index 613d56185e..fbe4b575f7 100644
@@ -4,7 +4,7 @@ QA output created by 121
 
 --- Test 1 ---
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=66060288 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=66060288
 Image resized.
 wrote 1049600/1049600 bytes at offset 65011712
 1.001 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -14,7 +14,7 @@ No errors were found on the image.
 
 --- Test 2 ---
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=66061312 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=66061312
 Image resized.
 wrote 133120/133120 bytes at offset 66060288
 130 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/125.out +96 -96

767 lines not on this page · raw message

tests/qemu-iotests/134.out +1 -1
index 09d46f6b17..f2878f5f3a 100644
@@ -1,5 +1,5 @@
 QA output created by 134
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 encryption=on encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
 
 == reading whole image ==
 read 134217728/134217728 bytes at offset 0
tests/qemu-iotests/144.out +2 -2
index c7aa2e4820..3900a46ed0 100644
@@ -9,7 +9,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=536870912
 { 'execute': 'qmp_capabilities' }
 {"return": {}}
 { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp.IMGFMT', 'format': 'IMGFMT' } }
-Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 cluster_size=65536 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 
 === Performing block-commit on active layer ===
@@ -31,6 +31,6 @@ Formatting 'TEST_DIR/tmp.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/
 === Performing Live Snapshot 2 ===
 
 { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/tmp2.IMGFMT', 'format': 'IMGFMT' } }
-Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/tmp2.qcow2', fmt=qcow2 cluster_size=65536 size=536870912 backing_file=TEST_DIR/t.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 *** done
tests/qemu-iotests/158.out +2 -2
index 6def216e55..fa2294bb85 100644
@@ -1,6 +1,6 @@
 QA output created by 158
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728 encryption=on encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
 
 == writing whole image ==
 wrote 134217728/134217728 bytes at offset 0
@@ -10,7 +10,7 @@ wrote 134217728/134217728 bytes at offset 0
 read 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base encryption=on encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing part of a cluster ==
 wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/182.out +1 -1
index a8eea166c3..a31bfb57b3 100644
@@ -13,7 +13,7 @@ Is another process using the image [TEST_DIR/t.qcow2]?
 {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node0', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } }
 {"return": {}}
 {'execute': 'blockdev-snapshot-sync', 'arguments': { 'node-name': 'node0', 'snapshot-file': 'TEST_DIR/t.IMGFMT.overlay', 'snapshot-node-name': 'node1' } }
-Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2.overlay', fmt=qcow2 cluster_size=65536 size=197120 backing_file=TEST_DIR/t.qcow2 backing_fmt=file lazy_refcounts=off refcount_bits=16
 {"return": {}}
 {'execute': 'blockdev-add', 'arguments': { 'node-name': 'node1', 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'locking': 'on' } }
 {"return": {}}
tests/qemu-iotests/185.out +4 -4
index 9a3b65782b..41c4773edc 100644
@@ -9,14 +9,14 @@ Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=67108864
 === Creating backing chain ===
 
 { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'disk', 'snapshot-file': 'TEST_DIR/t.IMGFMT.mid', 'format': 'IMGFMT', 'mode': 'absolute-paths' } }
-Formatting 'TEST_DIR/t.qcow2.mid', fmt=qcow2 size=67108864 backing_file=TEST_DIR/t.qcow2.base backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2.mid', fmt=qcow2 cluster_size=65536 size=67108864 backing_file=TEST_DIR/t.qcow2.base backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 { 'execute': 'human-monitor-command', 'arguments': { 'command-line': 'qemu-io disk "write 0 4M"' } }
 wrote 4194304/4194304 bytes at offset 0
 4 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 {"return": ""}
 { 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'disk', 'snapshot-file': 'TEST_DIR/t.IMGFMT', 'format': 'IMGFMT', 'mode': 'absolute-paths' } }
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 backing_file=TEST_DIR/t.qcow2.mid backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 cluster_size=65536 size=67108864 backing_file=TEST_DIR/t.qcow2.mid backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
 {"return": {}}
 
 === Start commit job and exit qemu ===
@@ -48,7 +48,7 @@ Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 backing_file=TEST_DIR/t.q
 { 'execute': 'qmp_capabilities' }
 {"return": {}}
 { 'execute': 'drive-mirror', 'arguments': { 'device': 'disk', 'target': 'TEST_DIR/t.IMGFMT.copy', 'format': 'IMGFMT', 'sync': 'full', 'speed': 65536 } }
-Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 cluster_size=65536 size=67108864 lazy_refcounts=off refcount_bits=16
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "disk"}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "disk"}}
 {"return": {}}
@@ -62,7 +62,7 @@ Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 cluster_size=65536 l
 { 'execute': 'qmp_capabilities' }
 {"return": {}}
 { 'execute': 'drive-backup', 'arguments': { 'device': 'disk', 'target': 'TEST_DIR/t.IMGFMT.copy', 'format': 'IMGFMT', 'sync': 'full', 'speed': 65536 } }
-Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 cluster_size=65536 size=67108864 lazy_refcounts=off refcount_bits=16
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "created", "id": "disk"}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "running", "id": "disk"}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": "JOB_STATUS_CHANGE", "data": {"status": "paused", "id": "disk"}}
tests/qemu-iotests/188.out +1 -1
index c568ef3701..4b9aadd51c 100644
@@ -1,5 +1,5 @@
 QA output created by 188
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
 
 == reading whole image ==
 read 16777216/16777216 bytes at offset 0
tests/qemu-iotests/189.out +2 -2
index a0b7c9c24c..e536d95d53 100644
@@ -1,6 +1,6 @@
 QA output created by 189
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=16777216 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
 
 == writing whole image ==
 wrote 16777216/16777216 bytes at offset 0
@@ -10,7 +10,7 @@ wrote 16777216/16777216 bytes at offset 0
 read 16777216/16777216 bytes at offset 0
 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing part of a cluster ==
 wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/198.out +2 -2
index 831ce3a289..b0f2d417af 100644
@@ -1,12 +1,12 @@
 QA output created by 198
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=16777216 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
 
 == writing whole image base ==
 wrote 16777216/16777216 bytes at offset 0
 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing whole image layer ==
 wrote 16777216/16777216 bytes at offset 0
tests/qemu-iotests/243.out +8 -8
index dcb33fac32..341ef3b7d0 100644
@@ -2,31 +2,31 @@ QA output created by 243
 
 === preallocation=off ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=off
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=off size=67108864
 File size: 196616
 Disk usage: low
 
 === preallocation=metadata ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=67108864
 File size: 67436544
 Disk usage: low
 
 === preallocation=falloc ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=falloc
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=falloc size=67108864
 File size: 67436544
 Disk usage: high
 
 === preallocation=full ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 preallocation=full
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=full size=67108864
 File size: 67436544
 Disk usage: high
 
 === External data file: preallocation=off ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=off
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=off size=67108864 data_file=TEST_DIR/t.IMGFMT.data
 qcow2 file size: 196616
 data file size:  67108864
 qcow2 disk usage: low
@@ -34,7 +34,7 @@ data disk usage:  low
 
 === External data file: preallocation=metadata ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=67108864 data_file=TEST_DIR/t.IMGFMT.data
 qcow2 file size: 327680
 data file size:  67108864
 qcow2 disk usage: low
@@ -42,7 +42,7 @@ data disk usage:  low
 
 === External data file: preallocation=falloc ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=falloc
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=falloc size=67108864 data_file=TEST_DIR/t.IMGFMT.data
 qcow2 file size: 327680
 data file size:  67108864
 qcow2 disk usage: low
@@ -50,7 +50,7 @@ data disk usage:  high
 
 === External data file: preallocation=full ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data preallocation=full
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=full size=67108864 data_file=TEST_DIR/t.IMGFMT.data
 qcow2 file size: 327680
 data file size:  67108864
 qcow2 disk usage: low
tests/qemu-iotests/250.out +1 -1
index f480fd273b..0b737097f3 100644
@@ -1,5 +1,5 @@
 QA output created by 250
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2202009600 preallocation=metadata
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT preallocation=metadata size=2202009600
 discard 10485760/10485760 bytes at offset 0
 10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 discard 10485760/10485760 bytes at offset 2191523840
tests/qemu-iotests/255.out +4 -4
index 348909fdef..96502e4336 100644
@@ -3,9 +3,9 @@ Finishing a commit job with background reads
 
 === Create backing chain and start VM ===
 
-Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-t.qcow2.mid', fmt=qcow2 cluster_size=65536 size=134217728 lazy_refcounts=off refcount_bits=16
 
-Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-t.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 lazy_refcounts=off refcount_bits=16
 
 === Start background read requests ===
 
@@ -23,9 +23,9 @@ Closing the VM while a job is being cancelled
 
 === Create images and start VM ===
 
-Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-src.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 lazy_refcounts=off refcount_bits=16
 
-Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 size=134217728 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-dst.qcow2', fmt=qcow2 cluster_size=65536 size=134217728 lazy_refcounts=off refcount_bits=16
 
 wrote 1048576/1048576 bytes at offset 0
 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/263.out +2 -2
index 0c982c55cb..4cf5c79ed8 100644
@@ -2,7 +2,7 @@ QA output created by 263
 
 testing LUKS qcow2 encryption
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=1048576
 == reading the whole image ==
 read 1048576/1048576 bytes at offset 0
 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -21,7 +21,7 @@ read 982528/982528 bytes at offset 66048
 
 testing legacy AES qcow2 encryption
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 encrypt.format=aes encrypt.key-secret=sec0
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=aes encrypt.key-secret=sec0 size=1048576
 == reading the whole image ==
 read 1048576/1048576 bytes at offset 0
 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/280.out +1 -1
index 5d382faaa8..0c0a30456b 100644
@@ -1,4 +1,4 @@
-Formatting 'TEST_DIR/PID-base', fmt=qcow2 size=67108864 cluster_size=65536 lazy_refcounts=off refcount_bits=16
+Formatting 'TEST_DIR/PID-base', fmt=qcow2 cluster_size=65536 size=67108864 lazy_refcounts=off refcount_bits=16
 
 === Launch VM ===
 Enabling migration QMP events on VM...
Signature · 1 line
2.17.2
#6 lore raw

PATCH v3 6/14 block/crypto: rename two functions

In reply to Maxim Levitsky

rename the write_func to create_write_func, and init_func to create_init_func. This is preparation for other write_func that will be used to update the encryption keys.

No functional changes

---
 block/crypto.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
block/crypto.c +12 -13
index d379e39efb..13ca1ad891 100644
@@ -79,12 +79,12 @@ struct BlockCryptoCreateData {
 };
 
 
-static ssize_t block_crypto_write_func(QCryptoBlock *block,
-                                       size_t offset,
-                                       const uint8_t *buf,
-                                       size_t buflen,
-                                       void *opaque,
-                                       Error **errp)
+static ssize_t block_crypto_create_write_func(QCryptoBlock *block,
+                                              size_t offset,
+                                              const uint8_t *buf,
+                                              size_t buflen,
+                                              void *opaque,
+                                              Error **errp)
 {
     struct BlockCryptoCreateData *data = opaque;
     ssize_t ret;
@@ -97,11 +97,10 @@ static ssize_t block_crypto_write_func(QCryptoBlock *block,
     return ret;
 }
 
-
-static ssize_t block_crypto_init_func(QCryptoBlock *block,
-                                      size_t headerlen,
-                                      void *opaque,
-                                      Error **errp)
+static ssize_t block_crypto_create_init_func(QCryptoBlock *block,
+                                             size_t headerlen,
+                                             void *opaque,
+                                             Error **errp)
 {
     struct BlockCryptoCreateData *data = opaque;
 
@@ -297,8 +296,8 @@ static int block_crypto_co_create_generic(BlockDriverState *bs,
     };
 
     crypto = qcrypto_block_create(opts, NULL,
-                                  block_crypto_init_func,
-                                  block_crypto_write_func,
+                                  block_crypto_create_init_func,
+                                  block_crypto_create_write_func,
                                   &data,
                                   errp);
 
Signature · 1 line
2.17.2
#7 lore raw

PATCH v3 7/14 block/crypto: implement the encryption key management

In reply to Maxim Levitsky

This implements the encryption key management using the generic code in qcrypto layer and exposes it to the user via qemu-img

This code adds another 'write_func' because the initialization write_func works directly on the underlying file, and amend works on instance of luks device.

This commit also adds a 'hack/workaround' I and Kevin Wolf (thanks) made to make the driver both support write sharing (to avoid breaking the users), and be safe against concurrent metadata update (the keyslots)

Eventually the write sharing for luks driver will be deprecated and removed together with this hack.

The hack is that we ask (as a format driver) for BLK_PERM_CONSISTENT_READ and then when we want to update the keys, we unshare that permission. So if someone else has the image open, even readonly, encryption key update will fail gracefully.

Also thanks to Daniel Berrange for the idea of unsharing read, rather that write permission which allows to avoid cases when the other user had opened the image read-only.

---
 block/crypto.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++--
 block/crypto.h |  34 +++++++++++++
 2 files changed, 158 insertions(+), 3 deletions(-)
block/crypto.c +124 -3
index 13ca1ad891..b71e57f777 100644
@@ -37,6 +37,7 @@ typedef struct BlockCrypto BlockCrypto;
 
 struct BlockCrypto {
     QCryptoBlock *block;
+    bool updating_keys;
 };
 
 
@@ -71,6 +72,24 @@ static ssize_t block_crypto_read_func(QCryptoBlock *block,
     return ret;
 }
 
+static ssize_t block_crypto_write_func(QCryptoBlock *block,
+                                       size_t offset,
+                                       const uint8_t *buf,
+                                       size_t buflen,
+                                       void *opaque,
+                                       Error **errp)
+{
+    BlockDriverState *bs = opaque;
+    ssize_t ret;
+
+    ret = bdrv_pwrite(bs->file, offset, buf, buflen);
+    if (ret < 0) {
+        error_setg_errno(errp, -ret, "Could not write encryption header");
+        return ret;
+    }
+    return ret;
+}
+
 
 struct BlockCryptoCreateData {
     BlockBackend *blk;
@@ -149,6 +168,19 @@ static QemuOptsList block_crypto_create_opts_luks = {
 };
 
 
+static QemuOptsList block_crypto_amend_opts_luks = {
+    .name = "crypto",
+    .head = QTAILQ_HEAD_INITIALIZER(block_crypto_create_opts_luks.head),
+    .desc = {
+        BLOCK_CRYPTO_OPT_DEF_LUKS_STATE(""),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_KEYSLOT(""),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_OLD_SECRET(""),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_NEW_SECRET(""),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME(""),
+        { /* end of list */ }
+    },
+};
+
 QCryptoBlockOpenOptions *
 block_crypto_open_opts_init(QDict *opts, Error **errp)
 {
@@ -742,6 +774,95 @@ block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
     return spec_info;
 }
 
+static int
+block_crypto_amend_options_luks(BlockDriverState *bs,
+                                QemuOpts *opts,
+                                BlockDriverAmendStatusCB *status_cb,
+                                void *cb_opaque,
+                                bool force,
+                                Error **errp)
+{
+    BlockCrypto *crypto = bs->opaque;
+    QDict *cryptoopts = NULL;
+    QCryptoBlockAmendOptions *amend_options = NULL;
+    int ret;
+
+    assert(crypto);
+    assert(crypto->block);
+    crypto->updating_keys = true;
+
+    ret = bdrv_child_refresh_perms(bs, bs->file, errp);
+    if (ret < 0) {
+        goto cleanup;
+    }
+
+    cryptoopts = qemu_opts_to_qdict(opts, NULL);
+    qdict_put_str(cryptoopts, "format", "luks");
+    amend_options = block_crypto_amend_opts_init(cryptoopts, errp);
+    if (!amend_options) {
+        ret = -EINVAL;
+        goto cleanup;
+    }
+
+    ret = qcrypto_block_amend_options(crypto->block,
+                                      block_crypto_read_func,
+                                      block_crypto_write_func,
+                                      bs,
+                                      amend_options,
+                                      force,
+                                      errp);
+cleanup:
+    crypto->updating_keys = false;
+    bdrv_child_refresh_perms(bs, bs->file, errp);
+    qapi_free_QCryptoBlockAmendOptions(amend_options);
+    qobject_unref(cryptoopts);
+    return ret;
+}
+
+
+static void
+block_crypto_child_perms(BlockDriverState *bs, BdrvChild *c,
+                         const BdrvChildRole *role,
+                         BlockReopenQueue *reopen_queue,
+                         uint64_t perm, uint64_t shared,
+                         uint64_t *nperm, uint64_t *nshared)
+{
+
+    BlockCrypto *crypto = bs->opaque;
+
+    bdrv_filter_default_perms(bs, c, role, reopen_queue,
+            perm, shared, nperm, nshared);
+    /*
+     * Ask for consistent read permission so that if
+     * someone else tries to open this image with this permission
+     * neither will be able to edit encryption keys, since
+     * we will unshare that permission while trying to
+     * update the encryption keys
+     */
+    if (!(bs->open_flags & BDRV_O_NO_IO)) {
+        *nperm |= BLK_PERM_CONSISTENT_READ;
+    }
+    /*
+     * This driver doesn't modify LUKS metadata except
+     * when updating the encryption slots.
+     * Thus unlike a proper format driver we don't ask for
+     * shared write/read permission. However we need it
+     * when we are updating the keys, to ensure that only we
+     * have access to the device.
+     *
+     * Encryption update will set the crypto->updating_keys
+     * during that period and refresh permissions
+     *
+     */
+    if (crypto->updating_keys) {
+        /* need exclusive write access for header update */
+        *nperm |= BLK_PERM_WRITE;
+        /* unshare read and write permission */
+        *nshared &= ~(BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE);
+    }
+}
+
+
 static const char *const block_crypto_strong_runtime_opts[] = {
     BLOCK_CRYPTO_OPT_LUKS_KEY_SECRET,
 
@@ -754,13 +875,12 @@ static BlockDriver bdrv_crypto_luks = {
     .bdrv_probe         = block_crypto_probe_luks,
     .bdrv_open          = block_crypto_open_luks,
     .bdrv_close         = block_crypto_close,
-    /* This driver doesn't modify LUKS metadata except when creating image.
-     * Allow share-rw=on as a special case. */
-    .bdrv_child_perm    = bdrv_filter_default_perms,
+    .bdrv_child_perm    = block_crypto_child_perms,
     .bdrv_co_create     = block_crypto_co_create_luks,
     .bdrv_co_create_opts = block_crypto_co_create_opts_luks,
     .bdrv_co_truncate   = block_crypto_co_truncate,
     .create_opts        = &block_crypto_create_opts_luks,
+    .amend_opts         = &block_crypto_amend_opts_luks,
 
     .bdrv_reopen_prepare = block_crypto_reopen_prepare,
     .bdrv_refresh_limits = block_crypto_refresh_limits,
@@ -770,6 +890,7 @@ static BlockDriver bdrv_crypto_luks = {
     .bdrv_measure       = block_crypto_measure,
     .bdrv_get_info      = block_crypto_get_info_luks,
     .bdrv_get_specific_info = block_crypto_get_specific_info_luks,
+    .bdrv_amend_options = block_crypto_amend_options_luks,
 
     .strong_runtime_opts = block_crypto_strong_runtime_opts,
 };
block/crypto.h +34 -0
index 06e044c9be..c72c3dec61 100644
@@ -41,6 +41,11 @@
 #define BLOCK_CRYPTO_OPT_LUKS_IVGEN_HASH_ALG "ivgen-hash-alg"
 #define BLOCK_CRYPTO_OPT_LUKS_HASH_ALG "hash-alg"
 #define BLOCK_CRYPTO_OPT_LUKS_ITER_TIME "iter-time"
+#define BLOCK_CRYPTO_OPT_LUKS_KEYSLOT "keyslot"
+#define BLOCK_CRYPTO_OPT_LUKS_STATE "state"
+#define BLOCK_CRYPTO_OPT_LUKS_OLD_SECRET "old-secret"
+#define BLOCK_CRYPTO_OPT_LUKS_NEW_SECRET "new-secret"
+
 
 #define BLOCK_CRYPTO_OPT_DEF_LUKS_KEY_SECRET(prefix)                    \
     BLOCK_CRYPTO_OPT_DEF_KEY_SECRET(prefix,                             \
@@ -88,6 +93,35 @@
         .help = "Time to spend in PBKDF in milliseconds",     \
     }
 
+#define BLOCK_CRYPTO_OPT_DEF_LUKS_STATE(prefix)                           \
+    {                                                                     \
+        .name = prefix BLOCK_CRYPTO_OPT_LUKS_STATE,                       \
+        .type = QEMU_OPT_STRING,                                          \
+        .help = "Select new state of affected keyslots (active/inactive)",\
+    }
+
+#define BLOCK_CRYPTO_OPT_DEF_LUKS_KEYSLOT(prefix)              \
+    {                                                          \
+        .name = prefix BLOCK_CRYPTO_OPT_LUKS_KEYSLOT,          \
+        .type = QEMU_OPT_NUMBER,                               \
+        .help = "Select a single keyslot to modify explicitly",\
+    }
+
+#define BLOCK_CRYPTO_OPT_DEF_LUKS_OLD_SECRET(prefix)            \
+    {                                                           \
+        .name = prefix BLOCK_CRYPTO_OPT_LUKS_OLD_SECRET,        \
+        .type = QEMU_OPT_STRING,                                \
+        .help = "Select all keyslots that match this password", \
+    }
+
+#define BLOCK_CRYPTO_OPT_DEF_LUKS_NEW_SECRET(prefix)            \
+    {                                                           \
+        .name = prefix BLOCK_CRYPTO_OPT_LUKS_NEW_SECRET,        \
+        .type = QEMU_OPT_STRING,                                \
+        .help = "New secret to set in the matching keyslots. "  \
+                "Empty string to erase",                        \
+    }
+
 QCryptoBlockCreateOptions *
 block_crypto_create_opts_init(QDict *opts, Error **errp);
 
Signature · 1 line
2.17.2
#8 lore raw

PATCH v3 8/14 block/qcow2: extend qemu-img amend interface with crypto options

In reply to Maxim Levitsky

Now that we have all the infrastructure in place, wire it in the qcow2 driver and expose this to the user.

---
 block/qcow2.c              | 72 +++++++++++++++++++++++++++++++++-----
 tests/qemu-iotests/082.out | 45 ++++++++++++++++++++++++
 2 files changed, 108 insertions(+), 9 deletions(-)
block/qcow2.c +63 -9
index e6c4d0b0b4..ce1e25f341 100644
@@ -176,6 +176,19 @@ static ssize_t qcow2_crypto_hdr_write_func(QCryptoBlock *block, size_t offset,
     return ret;
 }
 
+static QDict*
+qcow2_extract_crypto_opts(QemuOpts *opts, const char *fmt, Error **errp)
+{
+    QDict *cryptoopts_qdict;
+    QDict *opts_qdict;
+
+    /* Extract "encrypt." options into a qdict */
+    opts_qdict = qemu_opts_to_qdict(opts, NULL);
+    qdict_extract_subqdict(opts_qdict, &cryptoopts_qdict, "encrypt.");
+    qobject_unref(opts_qdict);
+    qdict_put_str(cryptoopts_qdict, "format", fmt);
+    return cryptoopts_qdict;
+}
 
 /*
  * read qcow2 extension and fill bs
@@ -4733,17 +4746,11 @@ static BlockMeasureInfo *qcow2_measure(QemuOpts *opts, BlockDriverState *in_bs,
     g_free(optstr);
 
     if (has_luks) {
+
         g_autoptr(QCryptoBlockCreateOptions) create_opts = NULL;
-        QDict *opts_qdict;
-        QDict *cryptoopts;
+        QDict *cryptoopts = qcow2_extract_crypto_opts(opts, "luks", errp);
         size_t headerlen;
 
-        opts_qdict = qemu_opts_to_qdict(opts, NULL);
-        qdict_extract_subqdict(opts_qdict, &cryptoopts, "encrypt.");
-        qobject_unref(opts_qdict);
-
-        qdict_put_str(cryptoopts, "format", "luks");
-
         create_opts = block_crypto_create_opts_init(cryptoopts, errp);
         qobject_unref(cryptoopts);
         if (!create_opts) {
@@ -5122,6 +5129,7 @@ typedef enum Qcow2AmendOperation {
     QCOW2_NO_OPERATION = 0,
 
     QCOW2_UPGRADING,
+    QCOW2_UPDATING_ENCRYPTION,
     QCOW2_CHANGING_REFCOUNT_ORDER,
     QCOW2_DOWNGRADING,
 } Qcow2AmendOperation;
@@ -5203,6 +5211,7 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
     int ret;
     QemuOptDesc *desc = opts->list->desc;
     Qcow2AmendHelperCBInfo helper_cb_info;
+    bool encryption_update = false;
 
     while (desc && desc->name) {
         if (!qemu_opt_find(opts, desc->name)) {
@@ -5229,6 +5238,18 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
             backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
         } else if (!strcmp(desc->name, BLOCK_OPT_BACKING_FMT)) {
             backing_format = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
+        } else if (g_str_has_prefix(desc->name, "encrypt.")) {
+            if (!s->crypto) {
+                error_setg(errp,
+                           "Can't amend encryption options - encryption not present");
+                return -EINVAL;
+            }
+            if (s->crypt_method_header != QCOW_CRYPT_LUKS) {
+                error_setg(errp,
+                           "Only LUKS encryption options can be amended");
+                return -ENOTSUP;
+            }
+            encryption_update = true;
         } else if (!strcmp(desc->name, BLOCK_OPT_LAZY_REFCOUNTS)) {
             lazy_refcounts = qemu_opt_get_bool(opts, BLOCK_OPT_LAZY_REFCOUNTS,
                                                lazy_refcounts);
@@ -5271,7 +5292,8 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
         .original_status_cb = status_cb,
         .original_cb_opaque = cb_opaque,
         .total_operations = (new_version != old_version)
-                          + (s->refcount_bits != refcount_bits)
+                          + (s->refcount_bits != refcount_bits) +
+                            (encryption_update == true)
     };
 
     /* Upgrade first (some features may require compat=1.1) */
@@ -5284,6 +5306,33 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
         }
     }
 
+    if (encryption_update) {
+        QDict *amend_opts_dict;
+        QCryptoBlockAmendOptions *amend_opts;
+
+        helper_cb_info.current_operation = QCOW2_UPDATING_ENCRYPTION;
+        amend_opts_dict = qcow2_extract_crypto_opts(opts, "luks", errp);
+        if (!amend_opts_dict) {
+            return -EINVAL;
+        }
+        amend_opts = block_crypto_amend_opts_init(amend_opts_dict, errp);
+        qobject_unref(amend_opts_dict);
+        if (!amend_opts) {
+            return -EINVAL;
+        }
+        ret = qcrypto_block_amend_options(s->crypto,
+                                          qcow2_crypto_hdr_read_func,
+                                          qcow2_crypto_hdr_write_func,
+                                          bs,
+                                          amend_opts,
+                                          force,
+                                          errp);
+        qapi_free_QCryptoBlockAmendOptions(amend_opts);
+        if (ret < 0) {
+            return ret;
+        }
+    }
+
     if (s->refcount_bits != refcount_bits) {
         int refcount_order = ctz32(refcount_bits);
 
@@ -5538,6 +5587,11 @@ static QemuOptsList qcow2_amend_opts = {
     .name = "qcow2-amend-opts",
     .head = QTAILQ_HEAD_INITIALIZER(qcow2_amend_opts.head),
     .desc = {
+        BLOCK_CRYPTO_OPT_DEF_LUKS_STATE("encrypt."),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_KEYSLOT("encrypt."),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_OLD_SECRET("encrypt."),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_NEW_SECRET("encrypt."),
+        BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),
         QCOW_COMMON_OPTIONS,
         { /* end of list */ }
     }
tests/qemu-iotests/082.out +45 -0

99 lines not on this page · raw message

Signature · 1 line
2.17.2
#9 lore raw

PATCH v3 9/14 iotests: filter few more luks specific create options

In reply to Maxim Levitsky

This allows more tests to be able to have same output on both qcow2 luks encrypted images and raw luks images

---
 tests/qemu-iotests/087.out       |  6 ++---
 tests/qemu-iotests/134.out       |  2 +-
 tests/qemu-iotests/158.out       |  4 +--
 tests/qemu-iotests/188.out       |  2 +-
 tests/qemu-iotests/189.out       |  4 +--
 tests/qemu-iotests/198.out       |  4 +--
 tests/qemu-iotests/263.out       |  4 +--
 tests/qemu-iotests/274.out       | 46 ++++++++++++++++----------------
 tests/qemu-iotests/284.out       |  6 ++---
 tests/qemu-iotests/common.filter |  6 +++--
 10 files changed, 43 insertions(+), 41 deletions(-)
tests/qemu-iotests/087.out +3 -3
index f23bffbbf1..d5ff53302e 100644
@@ -34,7 +34,7 @@ QMP_VERSION
 
 === Encrypted image QCow ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on size=134217728
 Testing:
 QMP_VERSION
 {"return": {}}
@@ -46,7 +46,7 @@ QMP_VERSION
 
 === Encrypted image LUKS ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
 Testing:
 QMP_VERSION
 {"return": {}}
@@ -58,7 +58,7 @@ QMP_VERSION
 
 === Missing driver ===
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on size=134217728
 Testing: -S
 QMP_VERSION
 {"return": {}}
tests/qemu-iotests/134.out +1 -1
index f2878f5f3a..e4733c0b81 100644
@@ -1,5 +1,5 @@
 QA output created by 134
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on size=134217728
 
 == reading whole image ==
 read 134217728/134217728 bytes at offset 0
tests/qemu-iotests/158.out +2 -2
index fa2294bb85..52ea9a488f 100644
@@ -1,6 +1,6 @@
 QA output created by 158
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encryption=on size=134217728
 
 == writing whole image ==
 wrote 134217728/134217728 bytes at offset 0
@@ -10,7 +10,7 @@ wrote 134217728/134217728 bytes at offset 0
 read 134217728/134217728 bytes at offset 0
 128 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on encrypt.key-secret=sec0 size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encryption=on size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing part of a cluster ==
 wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/188.out +1 -1
index 4b9aadd51c..5426861b18 100644
@@ -1,5 +1,5 @@
 QA output created by 188
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216
 
 == reading whole image ==
 read 16777216/16777216 bytes at offset 0
tests/qemu-iotests/189.out +2 -2
index e536d95d53..bc213cbe14 100644
@@ -1,6 +1,6 @@
 QA output created by 189
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=16777216
 
 == writing whole image ==
 wrote 16777216/16777216 bytes at offset 0
@@ -10,7 +10,7 @@ wrote 16777216/16777216 bytes at offset 0
 read 16777216/16777216 bytes at offset 0
 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing part of a cluster ==
 wrote 1024/1024 bytes at offset 0
tests/qemu-iotests/198.out +2 -2
index b0f2d417af..acfdf96b0c 100644
@@ -1,12 +1,12 @@
 QA output created by 198
 == create base ==
-Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=16777216
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=16777216
 
 == writing whole image base ==
 wrote 16777216/16777216 bytes at offset 0
 16 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
 == create overlay ==
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec1 encrypt.iter-time=10 size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=16777216 backing_file=TEST_DIR/t.IMGFMT.base
 
 == writing whole image layer ==
 wrote 16777216/16777216 bytes at offset 0
tests/qemu-iotests/263.out +2 -2
index 4cf5c79ed8..54bfbeeff8 100644
@@ -2,7 +2,7 @@ QA output created by 263
 
 testing LUKS qcow2 encryption
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10 size=1048576
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
 == reading the whole image ==
 read 1048576/1048576 bytes at offset 0
 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -21,7 +21,7 @@ read 982528/982528 bytes at offset 66048
 
 testing legacy AES qcow2 encryption
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT encrypt.format=aes encrypt.key-secret=sec0 size=1048576
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
 == reading the whole image ==
 read 1048576/1048576 bytes at offset 0
 1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
tests/qemu-iotests/274.out +23 -23

117 lines not on this page · raw message

tests/qemu-iotests/284.out +3 -3
index 48216f5742..a929239302 100644
@@ -2,7 +2,7 @@ QA output created by 284
 
 testing LUKS qcow2 encryption
 
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
 
 == cluster size 512
 == checking image refcounts ==
@@ -21,7 +21,7 @@ wrote 1/1 bytes at offset 512
 
 == rechecking image refcounts ==
 No errors were found on the image.
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
 
 == cluster size 2048
 == checking image refcounts ==
@@ -40,7 +40,7 @@ wrote 1/1 bytes at offset 2048
 
 == rechecking image refcounts ==
 No errors were found on the image.
-Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 encrypt.format=luks encrypt.key-secret=sec0 encrypt.iter-time=10
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
 
 == cluster size 32768
 == checking image refcounts ==
tests/qemu-iotests/common.filter +4 -2
index 3f8ee3e5f7..bcc4495d52 100644
@@ -150,8 +150,10 @@ _filter_img_create()
         -e "s# block_state_zero=\\(on\\|off\\)##g" \
         -e "s# log_size=[0-9]\\+##g" \
         -e "s# refcount_bits=[0-9]\\+##g" \
-        -e "s# key-secret=[a-zA-Z0-9]\\+##g" \
-        -e "s# iter-time=[0-9]\\+##g" \
+        -e "s# \\(encrypt\\.\\)\\?key-secret=[a-zA-Z0-9]\\+##g" \
+        -e "s# \\(encrypt\\.\\)\\?slot=[0-9]\\+##g" \
+        -e "s# \\(encrypt\\.\\)\\?iter-time=[0-9]\\+##g" \
+        -e "s# encrypt\\.format=[a-zA-Z0-9]\\+##g" \
         -e "s# force_size=\\(on\\|off\\)##g"
 }
 
Signature · 1 line
2.17.2
#10 lore raw

PATCH v3 10/14 iotests: qemu-img tests for luks key management

In reply to Maxim Levitsky

This commit adds two tests, which test the new amend interface of both luks raw images and qcow2 luks encrypted images.

---
 tests/qemu-iotests/300     | 207 +++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/300.out |  99 ++++++++++++++++++
 tests/qemu-iotests/301     |  90 ++++++++++++++++
 tests/qemu-iotests/301.out |  30 ++++++
 tests/qemu-iotests/group   |   3 +
 5 files changed, 429 insertions(+)
 create mode 100755 tests/qemu-iotests/300
 create mode 100644 tests/qemu-iotests/300.out
 create mode 100755 tests/qemu-iotests/301
 create mode 100644 tests/qemu-iotests/301.out
tests/qemu-iotests/300 new file +207 -0
new file mode 100755
index 0000000000..aa1a77690f
@@ -0,0 +1,207 @@
+#!/usr/bin/env bash
+#
+# Test encryption key management with luks
+# Based on 134
+#
+# Copyright (C) 2019 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# creator
[email protected]
+
+seq=`basename $0`
+echo "QA output created by $seq"
+
+status=1	# failure is the default!
+
+_cleanup()
+{
+	_cleanup_test_img
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+
+_supported_fmt qcow2 luks
+_supported_proto file #TODO
+
+QEMU_IO_OPTIONS=$QEMU_IO_OPTIONS_NO_FMT
+
+if [ "$IMGFMT" = "qcow2" ] ; then
+	PR="encrypt."
+	EXTRA_IMG_ARGS="-o encrypt.format=luks"
+fi
+
+
+# secrets: you are supposed to see the password as *******, see :-)
+S0="--object secret,id=sec0,data=hunter0"
+S1="--object secret,id=sec1,data=hunter1"
+S2="--object secret,id=sec2,data=hunter2"
+S3="--object secret,id=sec3,data=hunter3"
+S4="--object secret,id=sec4,data=hunter4"
+SECRETS="$S0 $S1 $S2 $S3 $S4"
+
+# image with given secret
+IMGS0="--image-opts driver=$IMGFMT,file.filename=$TEST_IMG,${PR}key-secret=sec0"
+IMGS1="--image-opts driver=$IMGFMT,file.filename=$TEST_IMG,${PR}key-secret=sec1"
+IMGS2="--image-opts driver=$IMGFMT,file.filename=$TEST_IMG,${PR}key-secret=sec2"
+IMGS3="--image-opts driver=$IMGFMT,file.filename=$TEST_IMG,${PR}key-secret=sec3"
+IMGS4="--image-opts driver=$IMGFMT,file.filename=$TEST_IMG,${PR}key-secret=sec4"
+
+
+echo "== creating a test image =="
+_make_test_img $S0 $EXTRA_IMG_ARGS -o ${PR}key-secret=sec0,${PR}iter-time=10 32M
+
+echo
+echo "== test that key 0 opens the image =="
+$QEMU_IO $S0 -c "read 0 4096" $IMGS0 | _filter_qemu_io | _filter_testdir
+
+echo
+echo "== adding a password to slot 4 =="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=active,${PR}new-secret=sec4,${PR}iter-time=10,${PR}keyslot=4
+echo "== adding a password to slot 1 =="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=active,${PR}new-secret=sec1,${PR}iter-time=10
+echo "== adding a password to slot 3 =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=active,${PR}new-secret=sec3,${PR}iter-time=10,${PR}keyslot=3
+
+echo "== adding a password to slot 2 =="
+$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=active,${PR}new-secret=sec2,${PR}iter-time=10
+
+
+echo "== erase slot 4 =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}keyslot=4 | _filter_img_create
+
+
+echo
+echo "== all secrets should work =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+echo
+echo "== erase slot 0 and try it =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec0 | _filter_img_create
+$QEMU_IO $SECRETS -c "read 0 4096" $IMGS0 | _filter_qemu_io | _filter_testdir
+
+echo
+echo "== erase slot 2 and try it =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}keyslot=2 | _filter_img_create
+$QEMU_IO $SECRETS -c "read 0 4096" $IMGS2 | _filter_qemu_io | _filter_testdir
+
+
+# at this point slots 1 and 3 should be active
+
+echo
+echo "== filling  4 slots with secret 2 =="
+for i in $(seq 0 3) ; do
+	$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=active,${PR}new-secret=sec2,${PR}iter-time=10
+done
+
+echo
+echo "== adding secret 0 =="
+	$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=active,${PR}new-secret=sec0,${PR}iter-time=10
+
+echo
+echo "== adding secret 3 (last slot) =="
+	$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=active,${PR}new-secret=sec3,${PR}iter-time=10
+
+echo
+echo "== trying to add another slot (should fail) =="
+$QEMU_IMG amend $SECRETS $IMGS2 -o ${PR}state=active,${PR}new-secret=sec3,${PR}iter-time=10
+
+echo
+echo "== all secrets should work again =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+
+echo
+
+echo "== erase all keys of secret 2=="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec2
+
+echo "== erase all keys of secret 1=="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec1
+
+echo "== erase all keys of secret 0=="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=inactive,${PR}old-secret=sec0
+
+echo "== erasing secret3 will fail now since it is the only secret (in 3 slots) =="
+$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=inactive,${PR}old-secret=sec3
+
+echo
+echo "== only secret3 should work now  =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+echo
+echo "== add secret0  =="
+$QEMU_IMG amend $SECRETS $IMGS3 -o ${PR}state=active,${PR}new-secret=sec0,${PR}iter-time=10
+
+echo "== erase secret3 =="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=inactive,${PR}old-secret=sec3
+
+echo
+echo "== only secret0 should work now  =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+echo
+echo "== replace secret0 with secret1 (should fail)  =="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=active,${PR}new-secret=sec1,${PR}keyslot=0
+
+echo
+echo "== replace secret0 with secret1 with force (should work)  =="
+$QEMU_IMG amend $SECRETS $IMGS0 -o ${PR}state=active,${PR}new-secret=sec1,${PR}iter-time=10,${PR}keyslot=0 --force
+
+echo
+echo "== only secret1 should work now  =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+
+echo
+echo "== erase last secret (should fail)  =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}keyslot=0
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec1
+
+
+echo "== erase non existing secrets (should fail)  =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec5 --force
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}old-secret=sec0 --force
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}keyslot=1 --force
+
+echo
+echo "== erase last secret with force by slot (should work)  =="
+$QEMU_IMG amend $SECRETS $IMGS1 -o ${PR}state=inactive,${PR}keyslot=0 --force
+
+echo
+echo "== we have no secrets now, data is lost forever =="
+for IMG in "$IMGS0" "$IMGS1" "$IMGS2" "$IMGS3"; do
+	$QEMU_IO $SECRETS -c "read 0 4096" $IMG | _filter_qemu_io | _filter_testdir
+done
+
+# success, all done
+echo "*** done"
+rm -f $seq.full
+status=0
+
tests/qemu-iotests/300.out new file +99 -0

99 lines not on this page · raw message

tests/qemu-iotests/301 new file +90 -0

90 lines not on this page · raw message

tests/qemu-iotests/301.out new file +30 -0
new file mode 100644
index 0000000000..e653c30330
@@ -0,0 +1,30 @@
+QA output created by 301
+== creating a test image ==
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=33554432
+
+== test that key 0 opens the image ==
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+== adding a password to slot 1 ==
+
+== 'backup' the image header ==
+1+0 records in
+1+0 records out
+
+== erase slot 0 ==
+
+== test that key 0 doesn't open the image ==
+qemu-io: can't open: Invalid password, cannot unlock any keyslot
+
+== 'restore' the image header ==
+1+0 records in
+1+0 records out
+
+== test that key 0 still doesn't open the image (key material is erased) ==
+qemu-io: can't open: Invalid password, cannot unlock any keyslot
+
+== test that key 1 still works ==
+read 4096/4096 bytes at offset 0
+4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+*** done
tests/qemu-iotests/group +3 -0
index 1710470e70..ed8580e660 100644
@@ -298,3 +298,6 @@
 288 quick
 289 rw quick
 290 rw auto quick
+
+300 rw auto
+301 rw auto quick
Signature · 1 line
2.17.2
#11 lore raw

PATCH v3 11/14 block/core: add generic infrastructure for x-blockdev-amend qmp command

In reply to Maxim Levitsky

blockdev-amend will be used similiar to blockdev-create
to allow on the fly changes of the structure of the format based block devices.

Current plan is to first support encryption keyslot management for luks based formats (raw and embedded in qcow2)

---
 block/Makefile.objs       |   2 +-
 block/amend.c             | 108 ++++++++++++++++++++++++++++++++++++++
 include/block/block_int.h |  21 +++++---
 qapi/block-core.json      |  42 +++++++++++++++
 qapi/job.json             |   4 +-
 5 files changed, 169 insertions(+), 8 deletions(-)
 create mode 100644 block/amend.c
block/Makefile.objs +1 -1
index 3635b6b4c1..a0988638d5 100644
@@ -19,7 +19,7 @@ block-obj-$(CONFIG_WIN32) += file-win32.o win32-aio.o
 block-obj-$(CONFIG_POSIX) += file-posix.o
 block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
 block-obj-$(CONFIG_LINUX_IO_URING) += io_uring.o
-block-obj-y += null.o mirror.o commit.o io.o create.o
+block-obj-y += null.o mirror.o commit.o io.o create.o amend.o
 block-obj-y += throttle-groups.o
 block-obj-$(CONFIG_LINUX) += nvme.o
 
block/amend.c new file +108 -0

108 lines not on this page · raw message

include/block/block_int.h +15 -6
index 1f0524285d..758cd832b3 100644
@@ -133,12 +133,27 @@ struct BlockDriver {
     int (*bdrv_file_open)(BlockDriverState *bs, QDict *options, int flags,
                           Error **errp);
     void (*bdrv_close)(BlockDriverState *bs);
+
+
     int coroutine_fn (*bdrv_co_create)(BlockdevCreateOptions *opts,
                                        Error **errp);
     int coroutine_fn (*bdrv_co_create_opts)(BlockDriver *drv,
                                             const char *filename,
                                             QemuOpts *opts,
                                             Error **errp);
+
+    int coroutine_fn (*bdrv_co_amend)(BlockDriverState *bs,
+                                      BlockdevAmendOptions *opts,
+                                      bool force,
+                                      Error **errp);
+
+    int (*bdrv_amend_options)(BlockDriverState *bs,
+                              QemuOpts *opts,
+                              BlockDriverAmendStatusCB *status_cb,
+                              void *cb_opaque,
+                              bool force,
+                              Error **errp);
+
     int (*bdrv_make_empty)(BlockDriverState *bs);
 
     /*
@@ -433,12 +448,6 @@ struct BlockDriver {
                                       BdrvCheckResult *result,
                                       BdrvCheckMode fix);
 
-    int (*bdrv_amend_options)(BlockDriverState *bs, QemuOpts *opts,
-                              BlockDriverAmendStatusCB *status_cb,
-                              void *cb_opaque,
-                              bool force,
-                              Error **errp);
-
     void (*bdrv_debug_event)(BlockDriverState *bs, BlkdebugEvent event);
 
     /* TODO Better pass a option string/QDict/QemuOpts to add any rule? */
qapi/block-core.json +42 -0

48 lines not on this page · raw message

qapi/job.json +3 -1
index 5e658281f5..7e4f7fcaa4 100644
@@ -19,10 +19,12 @@
 #
 # @create: image creation job type, see "blockdev-create" (since 3.0)
 #
+# @amend: image options amend job type, see "x-blockdev-amend" (since 5.0)
+#
 # Since: 1.7
 ##
 { 'enum': 'JobType',
-  'data': ['commit', 'stream', 'mirror', 'backup', 'create'] }
+  'data': ['commit', 'stream', 'mirror', 'backup', 'create', 'amend'] }
 
 ##
 # @JobStatus:
Signature · 1 line
2.17.2
#12 lore raw

PATCH v3 12/14 block/crypto: implement blockdev-amend

In reply to Maxim Levitsky
---
 block/crypto.c       | 72 ++++++++++++++++++++++++++++++++------------
 qapi/block-core.json | 14 ++++++++-
 2 files changed, 66 insertions(+), 20 deletions(-)
block/crypto.c +53 -19
index b71e57f777..d7725df79e 100644
@@ -775,32 +775,21 @@ block_crypto_get_specific_info_luks(BlockDriverState *bs, Error **errp)
 }
 
 static int
-block_crypto_amend_options_luks(BlockDriverState *bs,
-                                QemuOpts *opts,
-                                BlockDriverAmendStatusCB *status_cb,
-                                void *cb_opaque,
-                                bool force,
-                                Error **errp)
+block_crypto_amend_options_generic_luks(BlockDriverState *bs,
+                                        QCryptoBlockAmendOptions *amend_options,
+                                        bool force,
+                                        Error **errp)
 {
     BlockCrypto *crypto = bs->opaque;
-    QDict *cryptoopts = NULL;
-    QCryptoBlockAmendOptions *amend_options = NULL;
     int ret;
 
     assert(crypto);
     assert(crypto->block);
-    crypto->updating_keys = true;
 
+    /* apply for exclusive read/write permissions to the underlying file*/
+    crypto->updating_keys = true;
     ret = bdrv_child_refresh_perms(bs, bs->file, errp);
-    if (ret < 0) {
-        goto cleanup;
-    }
-
-    cryptoopts = qemu_opts_to_qdict(opts, NULL);
-    qdict_put_str(cryptoopts, "format", "luks");
-    amend_options = block_crypto_amend_opts_init(cryptoopts, errp);
-    if (!amend_options) {
-        ret = -EINVAL;
+    if (ret) {
         goto cleanup;
     }
 
@@ -812,13 +801,57 @@ block_crypto_amend_options_luks(BlockDriverState *bs,
                                       force,
                                       errp);
 cleanup:
+    /* release exclusive read/write permissions to the underlying file*/
     crypto->updating_keys = false;
     bdrv_child_refresh_perms(bs, bs->file, errp);
-    qapi_free_QCryptoBlockAmendOptions(amend_options);
+    return ret;
+}
+
+static int
+block_crypto_amend_options_luks(BlockDriverState *bs,
+                                QemuOpts *opts,
+                                BlockDriverAmendStatusCB *status_cb,
+                                void *cb_opaque,
+                                bool force,
+                                Error **errp)
+{
+    BlockCrypto *crypto = bs->opaque;
+    QDict *cryptoopts = NULL;
+    QCryptoBlockAmendOptions *amend_options = NULL;
+    int ret = -EINVAL;
+
+    assert(crypto);
+    assert(crypto->block);
+
+    cryptoopts = qemu_opts_to_qdict(opts, NULL);
+    qdict_put_str(cryptoopts, "format", "luks");
+    amend_options = block_crypto_amend_opts_init(cryptoopts, errp);
     qobject_unref(cryptoopts);
+    if (!amend_options) {
+        goto cleanup;
+    }
+    ret = block_crypto_amend_options_generic_luks(bs, amend_options,
+                                                  force, errp);
+cleanup:
+    qapi_free_QCryptoBlockAmendOptions(amend_options);
     return ret;
 }
 
+static int
+coroutine_fn block_crypto_co_amend_luks(BlockDriverState *bs,
+                                        BlockdevAmendOptions *opts,
+                                        bool force,
+                                        Error **errp)
+{
+    QCryptoBlockAmendOptions amend_opts;
+
+    amend_opts = (QCryptoBlockAmendOptions) {
+        .format = Q_CRYPTO_BLOCK_FORMAT_LUKS,
+        .u.luks = *qapi_BlockdevAmendOptionsLUKS_base(&opts->u.luks),
+    };
+    return block_crypto_amend_options_generic_luks(bs, &amend_opts,
+                                                   force, errp);
+}
 
 static void
 block_crypto_child_perms(BlockDriverState *bs, BdrvChild *c,
@@ -891,6 +924,7 @@ static BlockDriver bdrv_crypto_luks = {
     .bdrv_get_info      = block_crypto_get_info_luks,
     .bdrv_get_specific_info = block_crypto_get_specific_info_luks,
     .bdrv_amend_options = block_crypto_amend_options_luks,
+    .bdrv_co_amend      = block_crypto_co_amend_luks,
 
     .strong_runtime_opts = block_crypto_strong_runtime_opts,
 };
qapi/block-core.json +13 -1
index 5b9123c15f..a5f679ac17 100644
@@ -4649,6 +4649,18 @@
   'data': { 'job-id': 'str',
             'options': 'BlockdevCreateOptions' } }
 
+##
+# @BlockdevAmendOptionsLUKS:
+#
+# Driver specific image amend options for LUKS.
+#
+# Since: 5.0
+##
+{ 'struct': 'BlockdevAmendOptionsLUKS',
+  'base': 'QCryptoBlockAmendOptionsLUKS',
+  'data': { }
+}
+
 ##
 # @BlockdevAmendOptions:
 #
@@ -4663,7 +4675,7 @@
       'driver':         'BlockdevDriver' },
   'discriminator': 'driver',
   'data': {
-  } }
+      'luks':           'BlockdevAmendOptionsLUKS' } }
 
 ##
 # @x-blockdev-amend:
Signature · 1 line
2.17.2
#13 lore raw

PATCH v3 13/14 block/qcow2: implement blockdev-amend

In reply to Maxim Levitsky

Currently the implementation only supports amending the encryption options, unlike the qemu-img version

---
 block/qcow2.c        | 39 +++++++++++++++++++++++++++++++++++++++
 qapi/block-core.json | 16 +++++++++++++++-
 2 files changed, 54 insertions(+), 1 deletion(-)
block/qcow2.c +39 -0
index ce1e25f341..a770b88a8f 100644
@@ -5448,6 +5448,44 @@ static int qcow2_amend_options(BlockDriverState *bs, QemuOpts *opts,
     return 0;
 }
 
+static int coroutine_fn qcow2_co_amend(BlockDriverState *bs,
+                                       BlockdevAmendOptions *opts,
+                                       bool force,
+                                       Error **errp)
+{
+    BlockdevAmendOptionsQcow2 *qopts = &opts->u.qcow2;
+    BDRVQcow2State *s = bs->opaque;
+    int ret = 0;
+
+    if (qopts->has_encrypt) {
+        if (!s->crypto) {
+            error_setg(errp, "image is not encrypted, can't amend");
+            return -EOPNOTSUPP;
+        }
+
+        if (qopts->encrypt->format != Q_CRYPTO_BLOCK_FORMAT_LUKS) {
+            error_setg(errp,
+                       "Amend can't be used to change the qcow2 encryption format");
+            return -EOPNOTSUPP;
+        }
+
+        if (s->crypt_method_header != QCOW_CRYPT_LUKS) {
+            error_setg(errp,
+                       "Only LUKS encryption options can be amended for qcow2 with blockdev-amend");
+            return -EOPNOTSUPP;
+        }
+
+        ret = qcrypto_block_amend_options(s->crypto,
+                                          qcow2_crypto_hdr_read_func,
+                                          qcow2_crypto_hdr_write_func,
+                                          bs,
+                                          qopts->encrypt,
+                                          force,
+                                          errp);
+    }
+    return ret;
+}
+
 /*
  * If offset or size are negative, respectively, they will not be included in
  * the BLOCK_IMAGE_CORRUPTED event emitted.
@@ -5658,6 +5696,7 @@ BlockDriver bdrv_qcow2 = {
     .mutable_opts        = mutable_opts,
     .bdrv_co_check       = qcow2_co_check,
     .bdrv_amend_options  = qcow2_amend_options,
+    .bdrv_co_amend       = qcow2_co_amend,
 
     .bdrv_detach_aio_context  = qcow2_detach_aio_context,
     .bdrv_attach_aio_context  = qcow2_attach_aio_context,
qapi/block-core.json +15 -1
index a5f679ac17..0ffdc1c3d4 100644
@@ -4661,6 +4661,19 @@
   'data': { }
 }
 
+##
+# @BlockdevAmendOptionsQcow2:
+#
+# Driver specific image amend options for qcow2.
+# For now, only encryption options can be amended
+#
+# @encrypt          Encryption options to be amended
+#
+# Since: 5.0
+##
+{ 'struct': 'BlockdevAmendOptionsQcow2',
+  'data': { '*encrypt':         'QCryptoBlockAmendOptions' } }
+
 ##
 # @BlockdevAmendOptions:
 #
@@ -4675,7 +4688,8 @@
       'driver':         'BlockdevDriver' },
   'discriminator': 'driver',
   'data': {
-      'luks':           'BlockdevAmendOptionsLUKS' } }
+      'luks':           'BlockdevAmendOptionsLUKS',
+      'qcow2':          'BlockdevAmendOptionsQcow2' } }
 
 ##
 # @x-blockdev-amend:
Signature · 1 line
2.17.2
#14 lore raw

PATCH v3 14/14 iotests: add tests for blockdev-amend

In reply to Maxim Levitsky

This commit adds two tests that cover the
new blockdev-amend functionality of luks and qcow2 driver

---
 tests/qemu-iotests/302     | 278 +++++++++++++++++++++++++++++++++++++
 tests/qemu-iotests/302.out |  40 ++++++
 tests/qemu-iotests/303     | 233 +++++++++++++++++++++++++++++++
 tests/qemu-iotests/303.out |  33 +++++
 tests/qemu-iotests/group   |   2 +
 5 files changed, 586 insertions(+)
 create mode 100755 tests/qemu-iotests/302
 create mode 100644 tests/qemu-iotests/302.out
 create mode 100755 tests/qemu-iotests/303
 create mode 100644 tests/qemu-iotests/303.out
tests/qemu-iotests/302 new file +278 -0
new file mode 100755
index 0000000000..f7b4d13bd2
@@ -0,0 +1,278 @@
+#!/usr/bin/env python3
+#
+# Test case QMP's encrypted key management
+#
+# Copyright (C) 2019 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+import iotests
+import os
+import time
+import json
+
+test_img = os.path.join(iotests.test_dir, 'test.img')
+
+class Secret:
+    def __init__(self, index):
+        self._id = "keysec" + str(index)
+        # you are not supposed to see the password...
+        self._secret = "hunter" + str(index)
+
+    def id(self):
+        return self._id
+
+    def secret(self):
+        return self._secret
+
+    def to_cmdline_object(self):
+        return  [ "secret,id=" + self._id + ",data=" + self._secret]
+
+    def to_qmp_object(self):
+        return { "qom_type" : "secret", "id": self.id(),
+                 "props": { "data": self.secret() } }
+
+################################################################################
+class EncryptionSetupTestCase(iotests.QMPTestCase):
+
+    # test case startup
+    def setUp(self):
+        # start the VM
+        self.vm = iotests.VM()
+        self.vm.launch()
+
+        # create the secrets and load 'em into the VM
+        self.secrets = [ Secret(i) for i in range(0, 6) ]
+        for secret in self.secrets:
+            result = self.vm.qmp("object-add", **secret.to_qmp_object())
+            self.assert_qmp(result, 'return', {})
+
+        if iotests.imgfmt == "qcow2":
+            self.pfx = "encrypt."
+            self.img_opts = [ '-o', "encrypt.format=luks" ]
+        else:
+            self.pfx = ""
+            self.img_opts = []
+
+    # test case shutdown
+    def tearDown(self):
+        # stop the VM
+        self.vm.shutdown()
+
+    ###########################################################################
+    # create the encrypted block device
+    def createImg(self, file, secret):
+
+        iotests.qemu_img(
+            'create',
+            '--object', *secret.to_cmdline_object(),
+            '-f', iotests.imgfmt,
+            '-o', self.pfx + 'key-secret=' + secret.id(),
+            '-o', self.pfx + 'iter-time=10',
+            *self.img_opts,
+            file,
+            '1M')
+
+    ###########################################################################
+    # open an encrypted block device
+    def openImageQmp(self, id, file, secret, read_only = False):
+
+        encrypt_options = {
+            'key-secret' : secret.id()
+        }
+
+        if iotests.imgfmt == "qcow2":
+            encrypt_options = {
+                'encrypt': {
+                    'format':'luks',
+                    **encrypt_options
+                }
+            }
+
+        result = self.vm.qmp('blockdev-add', **
+            {
+                'driver': iotests.imgfmt,
+                'node-name': id,
+                'read-only': read_only,
+
+                **encrypt_options,
+
+                'file': {
+                    'driver': 'file',
+                    'filename': test_img,
+                }
+            }
+        )
+        self.assert_qmp(result, 'return', {})
+
+    # close the encrypted block device
+    def closeImageQmp(self, id):
+        result = self.vm.qmp('blockdev-del', **{ 'node-name': id })
+        self.assert_qmp(result, 'return', {})
+
+    ###########################################################################
+    # add a key to an encrypted block device
+    def addKeyQmp(self, id, new_secret, secret = None,
+                  slot = None, force = False):
+
+        crypt_options = {
+            'state'      : 'active',
+            'new-secret' : new_secret.id(),
+            'iter-time' : 10
+        }
+
+        if slot != None:
+            crypt_options['keyslot'] = slot
+
+
+        if secret != None:
+            crypt_options['secret'] = secret.id()
+
+        if iotests.imgfmt == "qcow2":
+            crypt_options['format'] = 'luks'
+            crypt_options = {
+                'encrypt': crypt_options
+            }
+
+        args = {
+            'node-name': id,
+            'job-id' : 'job_add_key',
+            'options' : {
+                    'driver' : iotests.imgfmt,
+                    **crypt_options
+                },
+        }
+
+        if force == True:
+            args['force'] = True
+
+        #TODO: check what jobs return
+        result = self.vm.qmp('x-blockdev-amend', **args)
+        assert result['return'] == {}
+        self.vm.run_job('job_add_key')
+
+    # erase a key from an encrypted block device
+    def eraseKeyQmp(self, id, old_secret = None, slot = None, force = False):
+
+        crypt_options = {
+            'state'      : 'inactive',
+        }
+
+        if slot != None:
+            crypt_options['keyslot'] = slot
+        if old_secret != None:
+            crypt_options['old-secret'] = old_secret.id()
+
+        if iotests.imgfmt == "qcow2":
+            crypt_options['format'] = 'luks'
+            crypt_options = {
+                'encrypt': crypt_options
+            }
+
+        args = {
+            'node-name': id,
+            'job-id' : 'job_erase_key',
+            'options' : {
+                    'driver' : iotests.imgfmt,
+                    **crypt_options
+                },
+        }
+
+        if force == True:
+            args['force'] = True
+
+        result = self.vm.qmp('x-blockdev-amend', **args)
+        assert result['return'] == {}
+        self.vm.run_job('job_erase_key')
+
+    ###########################################################################
+    # create image, and change its key
+    def testChangeKey(self):
+
+        # create the image with secret0 and open it
+        self.createImg(test_img, self.secrets[0]);
+        self.openImageQmp("testdev", test_img, self.secrets[0])
+
+        # add key to slot 1
+        self.addKeyQmp("testdev", new_secret = self.secrets[1])
+
+        # add key to slot 5
+        self.addKeyQmp("testdev", new_secret = self.secrets[2], slot=5)
+
+        # erase key from slot 0
+        self.eraseKeyQmp("testdev", old_secret = self.secrets[0])
+
+        #reopen the image with secret1
+        self.closeImageQmp("testdev")
+        self.openImageQmp("testdev", test_img, self.secrets[1])
+
+        # close and erase the image for good
+        self.closeImageQmp("testdev")
+        os.remove(test_img)
+
+    # test that if we erase the old password,
+    # we can still change the encryption keys using 'old-secret'
+    def testOldPassword(self):
+
+        # create the image with secret0 and open it
+        self.createImg(test_img, self.secrets[0]);
+        self.openImageQmp("testdev", test_img, self.secrets[0])
+
+        # add key to slot 1
+        self.addKeyQmp("testdev", new_secret = self.secrets[1])
+
+        # erase key from slot 0
+        self.eraseKeyQmp("testdev", old_secret = self.secrets[0])
+
+        # this will fail as the old password is no longer valid
+        self.addKeyQmp("testdev", new_secret = self.secrets[2])
+
+        # this will work
+        self.addKeyQmp("testdev", new_secret = self.secrets[2], secret = self.secrets[1])
+
+        # close and erase the image for good
+        self.closeImageQmp("testdev")
+        os.remove(test_img)
+
+    def testUseForceLuke(self):
+
+        self.createImg(test_img, self.secrets[0]);
+        self.openImageQmp("testdev", test_img, self.secrets[0])
+
+        # Add bunch of secrets
+        self.addKeyQmp("testdev", new_secret = self.secrets[1], slot=4)
+        self.addKeyQmp("testdev", new_secret = self.secrets[4], slot=2)
+
+        # overwrite an active secret
+        self.addKeyQmp("testdev", new_secret = self.secrets[5], slot=2)
+        self.addKeyQmp("testdev", new_secret = self.secrets[5], slot=2, force=True)
+
+        self.addKeyQmp("testdev", new_secret = self.secrets[0])
+
+        # Now erase all the secrets
+        self.eraseKeyQmp("testdev", old_secret = self.secrets[5])
+        self.eraseKeyQmp("testdev", slot=4)
+
+        # erase last keyslot
+        self.eraseKeyQmp("testdev", old_secret = self.secrets[0])
+        self.eraseKeyQmp("testdev", old_secret = self.secrets[0], force=True)
+
+        self.closeImageQmp("testdev")
+        os.remove(test_img)
+
+
+if __name__ == '__main__':
+    # Encrypted formats support
+    iotests.main(supported_fmts = ['qcow2', 'luks'])
tests/qemu-iotests/302.out new file +40 -0
new file mode 100644
index 0000000000..da4d43d31e
@@ -0,0 +1,40 @@
+...
+----------------------------------------------------------------------
+Ran 3 tests
+
+OK
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
+Job failed: Invalid password, cannot unlock any keyslot
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+Job failed: Refusing to overwrite active slot 2 - please erase it first
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_add_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
+Job failed: Requested operation will erase all active keyslots which will erase all the data in the image irreversibly - refusing operation
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job_erase_key"}}
+{"return": {}}
tests/qemu-iotests/303 new file +233 -0

233 lines not on this page · raw message

tests/qemu-iotests/303.out new file +33 -0
new file mode 100644
index 0000000000..a62bb20b67
@@ -0,0 +1,33 @@
+..
+----------------------------------------------------------------------
+Ran 2 tests
+
+OK
+Formatting 'TEST_DIR/test.img', fmt=luks size=1048576 key-secret=keysec0 iter-time=10
+
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+Job failed: Failed to get shared "consistent read" lock
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+Job failed: Failed to get shared "consistent read" lock
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+qemu-img: Failed to get shared "consistent read" lock
+Is another process using the image [TEST_DIR/test.img]?
+
+Formatting 'TEST_DIR/test.img', fmt=luks size=1048576 key-secret=keysec0 iter-time=10
+
+Job failed: Block node is read-only
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+Job failed: Failed to get shared "consistent read" lock
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+Job failed: Failed to get shared "consistent read" lock
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
+{"execute": "job-dismiss", "arguments": {"id": "job0"}}
+{"return": {}}
tests/qemu-iotests/group +2 -0
index ed8580e660..64c6c7d2e6 100644
@@ -301,3 +301,5 @@
 
 300 rw auto
 301 rw auto quick
+302 rw auto
+303 rw auto
Signature · 1 line
2.17.2
#15 lore raw
In reply to Maxim Levitsky
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Message-id: [email protected]
Subject: [PATCH v3 00/14] LUKS: encryption slot management using amend interface
Type: series

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
5d8eee3 iotests: add tests for blockdev-amend
73b4eb1 block/qcow2: implement blockdev-amend
b636b4e block/crypto: implement blockdev-amend
989ac21 block/core: add generic infrastructure for x-blockdev-amend qmp command 905e766 iotests: qemu-img tests for luks key management
63c741f iotests: filter few more luks specific create options 7f3246a block/qcow2: extend qemu-img amend interface with crypto options 2e71af1 block/crypto: implement the encryption key management e23e157 block/crypto: rename two functions
1d744a7 block/amend: refactor qcow2 amend options
9dfeafe block/amend: separate amend and create options for qemu-img 6abf4af block/amend: add 'force' option
70e39d2 qcrypto/luks: implement encryption key management
3e1975e qcrypto/core: add generic infrastructure for crypto options amendment

=== OUTPUT BEGIN ===
1/14 Checking commit 3e1975eea93f (qcrypto/core: add generic infrastructure for crypto options amendment) 2/14 Checking commit 70e39d22b302 (qcrypto/luks: implement encryption key management) 3/14 Checking commit 6abf4afc9174 (block/amend: add 'force' option)
4/14 Checking commit 9dfeafe0f584 (block/amend: separate amend and create options for qemu-img)
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#31: FILE: block/qcow2.c:5498:

+#define QCOW_COMMON_OPTIONS                                         \
+    {                                                               \
+        .name = BLOCK_OPT_SIZE,                                     \
+        .type = QEMU_OPT_SIZE,                                      \
+        .help = "Virtual disk size"                                 \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_COMPAT_LEVEL,                             \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Compatibility level (v2 [0.10] or v3 [1.1])"       \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_BACKING_FILE,                             \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "File name of a base image"                         \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_BACKING_FMT,                              \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Image format of the base image"                    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_DATA_FILE,                                \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "File name of an external data file"                \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_DATA_FILE_RAW,                            \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "The external data file must stay valid "           \
+                "as a raw image"                                    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_ENCRYPT,                                  \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "Encrypt the image with format 'aes'. (Deprecated " \
+                "in favor of " BLOCK_OPT_ENCRYPT_FORMAT "=aes)",    \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_ENCRYPT_FORMAT,                           \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Encrypt the image, format choices: 'aes', 'luks'", \
+    },                                                              \
+    BLOCK_CRYPTO_OPT_DEF_KEY_SECRET("encrypt.",                     \
+        "ID of secret providing qcow AES key or LUKS passphrase"),  \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_ALG("encrypt."),               \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_CIPHER_MODE("encrypt."),              \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_ALG("encrypt."),                \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_IVGEN_HASH_ALG("encrypt."),           \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_HASH_ALG("encrypt."),                 \
+    BLOCK_CRYPTO_OPT_DEF_LUKS_ITER_TIME("encrypt."),                \
+    {                                                               \
+        .name = BLOCK_OPT_CLUSTER_SIZE,                             \
+        .type = QEMU_OPT_SIZE,                                      \
+        .help = "qcow2 cluster size",                               \
+        .def_value_str = stringify(DEFAULT_CLUSTER_SIZE)            \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_PREALLOC,                                 \
+        .type = QEMU_OPT_STRING,                                    \
+        .help = "Preallocation mode (allowed values: off, "         \
+                "metadata, falloc, full)"                           \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_LAZY_REFCOUNTS,                           \
+        .type = QEMU_OPT_BOOL,                                      \
+        .help = "Postpone refcount updates",                        \
+        .def_value_str = "off"                                      \
+    },                                                              \
+    {                                                               \
+        .name = BLOCK_OPT_REFCOUNT_BITS,                            \
+        .type = QEMU_OPT_NUMBER,                                    \
+        .help = "Width of a reference count entry in bits",         \
+        .def_value_str = "16"                                       \
+    }                                                               \

+

total: 1 errors, 0 warnings, 231 lines checked

Patch 4/14 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.

5/14 Checking commit 1d744a7b0346 (block/amend: refactor qcow2 amend options)
6/14 Checking commit e23e15761eaf (block/crypto: rename two functions)
7/14 Checking commit 2e71af15aca9 (block/crypto: implement the encryption key management) 8/14 Checking commit 7f3246a67d36 (block/qcow2: extend qemu-img amend interface with crypto options) 9/14 Checking commit 63c741ff4dd1 (iotests: filter few more luks specific create options) 10/14 Checking commit 905e766ae0a7 (iotests: qemu-img tests for luks key management)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#15:
new file mode 100755

total: 0 errors, 1 warnings, 432 lines checked

Patch 10/14 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
11/14 Checking commit 989ac217ef73 (block/core: add generic infrastructure for x-blockdev-amend qmp command)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#31:
new file mode 100644

total: 0 errors, 1 warnings, 216 lines checked

Patch 11/14 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
12/14 Checking commit b636b4e630bd (block/crypto: implement blockdev-amend) 13/14 Checking commit 73b4eb12a431 (block/qcow2: implement blockdev-amend) 14/14 Checking commit 5d8eee36ada5 (iotests: add tests for blockdev-amend)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #15:
new file mode 100755

total: 0 errors, 1 warnings, 589 lines checked

Patch 14/14 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

#16 lore raw
In reply to Maxim Levitsky
Quoted 21 lines · Maxim Levitsky

Hi!
Here is the updated series of my patches, incorporating all the feedback I received.

This implements the API interface that we agreed upon except that I merged the LUKSKeyslotActive/LUKSKeyslotInactive union into a struct because otherwise I need nested unions which are not supported currently by QAPI parser. This didn't change the API and thus once support for nested unions is there, it can always be implemented in backward compatible way.

I hope that this series will finally be considered for merging, since I am somewhat running out of time to finish this task.

Patches are strictly divided by topic to 3 groups, and each group depends on former groups.

* Patches 1,2 implement qcrypto generic amend interface, including definition of structs used in crypto.json and implement this in luks crypto driver Nothing is exposed to the user at this stage

* Patches 3-9 use the code from patches 1,2 to implement qemu-img amend based encryption slot management for luks and for qcow2, and add a bunch of iotests to cover that.

Quoted 8 lines

* Patches 10-13 add x-blockdev-amend (I'll drop the -x prefix if you like), and wire it to luks and qcow2 driver to implement qmp based encryption slot management also using the code from patches 1,2, and also add a bunch of iotests to cover this.

Tested with -raw,-qcow2 and -luks iotests and 'make check'

V3: rebased, addressed most of the review feedback.
For now I kept the slot bitmap code since I am not sure that replacing it will be better.

I'm still of the opinion that the bitmaps code should be replaced. With this current design we are iterating over the slot of keys slots 4 times, doing different checks/logic in each iteration. This is really not nice for understanding how the code works. IMHO we should be iterating at most twice - once to validate the requested configuration, and once
to apply the requested configuration. Even if there si duplication of
logic in between the delete/add key codepaths, I think it will be better as the logic for each operation will be in one place.

Regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#17 lore raw
Quoted 41 lines · Daniel P. Berrangé
Quoted 21 lines · Maxim Levitsky

Hi!
Here is the updated series of my patches, incorporating all the feedback I received.

This implements the API interface that we agreed upon except that I merged the LUKSKeyslotActive/LUKSKeyslotInactive union into a struct because otherwise I need nested unions which are not supported currently by QAPI parser. This didn't change the API and thus once support for nested unions is there, it can always be implemented in backward compatible way.

I hope that this series will finally be considered for merging, since I am somewhat running out of time to finish this task.

Patches are strictly divided by topic to 3 groups, and each group depends on former groups.

* Patches 1,2 implement qcrypto generic amend interface, including definition of structs used in crypto.json and implement this in luks crypto driver Nothing is exposed to the user at this stage

* Patches 3-9 use the code from patches 1,2 to implement qemu-img amend based encryption slot management for luks and for qcow2, and add a bunch of iotests to cover that.

Quoted 8 lines

* Patches 10-13 add x-blockdev-amend (I'll drop the -x prefix if you like), and wire it to luks and qcow2 driver to implement qmp based encryption slot management also using the code from patches 1,2, and also add a bunch of iotests to cover this.

Tested with -raw,-qcow2 and -luks iotests and 'make check'

V3: rebased, addressed most of the review feedback.
For now I kept the slot bitmap code since I am not sure that replacing it will be better.

I'm still of the opinion that the bitmaps code should be replaced. With this current design we are iterating over the slot of keys slots 4 times, doing different checks/logic in each iteration. This is really not nice for understanding how the code works. IMHO we should be iterating at most twice - once to validate the requested configuration, and once
to apply the requested configuration. Even if there si duplication of
logic in between the delete/add key codepaths, I think it will be better as the logic for each operation will be in one place.

Quoted 2 lines

Regards,
Daniel

All right then, I also agree kind of that these iterations aren't that nice. I just wanted to do this in the same way the spec defines it, which is currently kind of independent of how key add/remove operation.

I'll send updated code soon.

Best regards,
Maxim Levitsky