Skip to contentSkip to conversation

kbuild: remove misleading stale FIXME comment

PATCH In review Masahiro Yamada 1 participant 4 messages May 4, 2020 – May 12, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 kbuild: remove misleading stale FIXME comment

This comment was added by commit ("kbuild: Restore build nr, improve vmlinux link") [1].

It was talking about if_changed_rule at that time. Now, it is unclear what to fix.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ea52ca1b3e3882b499cc6c043f384958b88b62ff

---

 Makefile | 3 ---
 1 file changed, 3 deletions(-)
Makefile +0 -3
index 9ff00bfe0575..ffd80afcd0bb 100644
@@ -1827,9 +1827,6 @@ tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
 	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
-# FIXME Should go into a make.lib or something
-# ===========================================================================
-
 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
       cmd_rmdirs = rm -rf $(rm-dirs)
 
Signature · 1 line
2.25.1
#1 lore raw

PATCH 2/2 kbuild: remove {CLEAN,MRPROPER,DISTCLEAN}_DIRS

Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES because the difference is just the -r option passed to the 'rm' command.

Do likewise as commit 1634f2bfdb84 ("kbuild: remove clean-dirs syntax").

---

 Makefile         | 22 ++++++----------------
 arch/um/Makefile |  2 +-
 2 files changed, 7 insertions(+), 17 deletions(-)
Makefile +6 -16
index ffd80afcd0bb..8a7c931cc0d9 100644
@@ -1389,14 +1389,14 @@ endif # CONFIG_MODULES
 # make distclean Remove editor backup files, patch leftover files and the like
 
 # Directories & files removed with 'make clean'
-CLEAN_DIRS  += include/ksym
-CLEAN_FILES += modules.builtin modules.builtin.modinfo modules.nsdeps
+CLEAN_FILES += include/ksym \
+	       modules.builtin modules.builtin.modinfo modules.nsdeps
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include/generated          \
+MRPROPER_FILES += include/config include/generated          \
 		  arch/$(SRCARCH)/include/generated .tmp_objdiff \
-		  debian/ snap/ tar-install/
-MRPROPER_FILES += .config .config.old .version \
+		  debian snap tar-install \
+		  .config .config.old .version \
 		  Module.symvers \
 		  signing_key.pem signing_key.priv signing_key.x509	\
 		  x509.genkey extra_certificates signing_key.x509.keyid	\
@@ -1404,12 +1404,10 @@ MRPROPER_FILES += .config .config.old .version \
 		  *.spec
 
 # Directories & files removed with 'make distclean'
-DISTCLEAN_DIRS  +=
 DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
 
 # clean - Delete most, but leave enough to build external modules
 #
-clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 
 PHONY += archclean vmlinuxclean
@@ -1422,7 +1420,6 @@ clean: archclean vmlinuxclean
 
 # mrproper - Delete all generated files, including .config
 #
-mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,scripts)
 
@@ -1431,18 +1428,15 @@ $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
 mrproper: clean $(mrproper-dirs)
-	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 
 # distclean
 #
-distclean: rm-dirs  := $(wildcard $(DISTCLEAN_DIRS))
 distclean: rm-files := $(wildcard $(DISTCLEAN_FILES))
 
 PHONY += distclean
 
 distclean: mrproper
-	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 	@find $(srctree) $(RCS_FIND_IGNORE) \
 		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
@@ -1732,7 +1726,6 @@ $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 clean: $(clean-dirs)
-	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
 		\( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
@@ -1827,11 +1820,8 @@ tools/%: FORCE
 	$(Q)mkdir -p $(objtree)/tools
 	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
-quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
-      cmd_rmdirs = rm -rf $(rm-dirs)
-
 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
-      cmd_rmfiles = rm -f $(rm-files)
+      cmd_rmfiles = rm -rf $(rm-files)
 
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
arch/um/Makefile +1 -1
index 275f5ffdf6f0..3f27aa3ec0a6 100644
@@ -140,7 +140,7 @@ export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out
-MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
+MRPROPER_FILES += arch/$(SUBARCH)/include/generated
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
Signature · 7 lines
2.25.1


_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um
#2 lore raw

Re: [PATCH 2/2] kbuild: remove {CLEAN,MRPROPER,DISTCLEAN}_DIRS

Quoted 7 lines · Masahiro Yamada

Merge {CLEAN,MRPROPER,DISTCLEAN}_DIRS into {CLEAN,MRPROPER,DISTCLEAN}_FILES because the difference is just the -r option passed to the 'rm' command.

Do likewise as commit 1634f2bfdb84 ("kbuild: remove clean-dirs syntax").

Applied to linux-kbuild.

Quoted 107 lines

---

 Makefile         | 22 ++++++----------------
 arch/um/Makefile |  2 +-
 2 files changed, 7 insertions(+), 17 deletions(-)
Makefile +6 -16
index ffd80afcd0bb..8a7c931cc0d9 100644
@@ -1389,14 +1389,14 @@ endif # CONFIG_MODULES
 # make distclean Remove editor backup files, patch leftover files and the like
 
 # Directories & files removed with 'make clean'
-CLEAN_DIRS  += include/ksym
-CLEAN_FILES += modules.builtin modules.builtin.modinfo modules.nsdeps
+CLEAN_FILES += include/ksym \
+              modules.builtin modules.builtin.modinfo modules.nsdeps
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include/generated          \
+MRPROPER_FILES += include/config include/generated          \
                  arch/$(SRCARCH)/include/generated .tmp_objdiff \
-                 debian/ snap/ tar-install/
-MRPROPER_FILES += .config .config.old .version \
+                 debian snap tar-install \
+                 .config .config.old .version \
                  Module.symvers \
                  signing_key.pem signing_key.priv signing_key.x509     \
                  x509.genkey extra_certificates signing_key.x509.keyid \
@@ -1404,12 +1404,10 @@ MRPROPER_FILES += .config .config.old .version \
                  *.spec
 
 # Directories & files removed with 'make distclean'
-DISTCLEAN_DIRS  +=
 DISTCLEAN_FILES += tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
 
 # clean - Delete most, but leave enough to build external modules
 #
-clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 
 PHONY += archclean vmlinuxclean
@@ -1422,7 +1420,6 @@ clean: archclean vmlinuxclean
 
 # mrproper - Delete all generated files, including .config
 #
-mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,scripts)
 
@@ -1431,18 +1428,15 @@ $(mrproper-dirs):
        $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
 mrproper: clean $(mrproper-dirs)
-       $(call cmd,rmdirs)
        $(call cmd,rmfiles)
 
 # distclean
 #
-distclean: rm-dirs  := $(wildcard $(DISTCLEAN_DIRS))
 distclean: rm-files := $(wildcard $(DISTCLEAN_FILES))
 
 PHONY += distclean
 
 distclean: mrproper
-       $(call cmd,rmdirs)
        $(call cmd,rmfiles)
        @find $(srctree) $(RCS_FIND_IGNORE) \
                \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
@@ -1732,7 +1726,6 @@ $(clean-dirs):
        $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 clean: $(clean-dirs)
-       $(call cmd,rmdirs)
        $(call cmd,rmfiles)
        @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
                \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \
@@ -1827,11 +1820,8 @@ tools/%: FORCE
        $(Q)mkdir -p $(objtree)/tools
        $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
-quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
-      cmd_rmdirs = rm -rf $(rm-dirs)
-
 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
-      cmd_rmfiles = rm -f $(rm-files)
+      cmd_rmfiles = rm -rf $(rm-files)
 
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
arch/um/Makefile +1 -2
index 275f5ffdf6f0..3f27aa3ec0a6 100644
@@ -140,7 +140,7 @@ export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out
-MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
+MRPROPER_FILES += arch/$(SUBARCH)/include/generated
 
 archclean:
        @find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
--

2.25.1

Signature · 2 lines
Best Regards
Masahiro Yamada
#3 lore raw
In reply to Masahiro Yamada
Quoted 10 lines · Masahiro Yamada

This comment was added by commit ("kbuild: Restore build nr, improve vmlinux link") [1].

It was talking about if_changed_rule at that time. Now, it is unclear what to fix.

[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=ea52ca1b3e3882b499cc6c043f384958b88b62ff

---

Applied to linux-kbuild.

Quoted 21 lines
 Makefile | 3 ---
 1 file changed, 3 deletions(-)
Makefile +0 -4
index 9ff00bfe0575..ffd80afcd0bb 100644
@@ -1827,9 +1827,6 @@ tools/%: FORCE
        $(Q)mkdir -p $(objtree)/tools
        $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
 
-# FIXME Should go into a make.lib or something
-# ===========================================================================
-
 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
       cmd_rmdirs = rm -rf $(rm-dirs)
 
--

2.25.1

Signature · 2 lines
Best Regards
Masahiro Yamada