allow RAID5 to grow to RAID6 with a backup_file
PATCH v2 1/1 allow RAID5 to grow to RAID6 with a backup_file
This problem came in, as the user did not specify a full path with the backup_file option when growing an RAID5 array to RAID6. When the full path is specified, the symbolic link is created properly (/run/mdadm/backup_file-mdX). But the code did not support the symbolic link when looking for the backup_file. Added two checks for symlink.
This addresses https://www.spinics.net/lists/raid/msg48910.html
and numerous customer reported problems.
V2:
- Removed unneeded break; in both case-statements
- Returned the error checking on call to lstat
--- Grow.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
Grow.c +19 -2
@@ -1135,6 +1135,15 @@ int reshape_open_backup_file(char *backup_file,unsigned int dev;int i; +if (lstat (backup_file, &stb) !=-1 ) { +switch (stb.st_mode &S_IFMT ) { +case S_IFLNK : +return 1 ; +default : +break ; + } + } + *fdlist =open (backup_file,O_RDWR |O_CREAT |(restart ?O_TRUNC :O_EXCL ),S_IRUSR |S_IWUSR ); *offsets =8 *512 ;
@@ -5236,8 +5245,16 @@ char *locate_backup(char *name)char *fl =make_backup (name);struct stat stb; -if (stat (fl, &stb) ==0 &&S_ISREG (stb.st_mode)) -return fl; +if (lstat (fl, &stb) ==0 ) { +switch (stb.st_mode &S_IFMT ) { +case S_IFLNK : +return fl; +case S_IFREG : +return fl; +default : +break ; + } + }free (fl);return NULL ;
Signature · 1 line
2.20.1
Quoted 26 lines · Nigel Croxon
This problem came in, as the user did not specify a full path with the
backup_fileoption when growing an RAID5 array to RAID6. When the full path is specified, the symbolic link is created properly (/run/mdadm/backup_file-mdX). But the code did not support the symbolic link when looking for thebackup_file. Added two checks for symlink.This addresses https://www.spinics.net/lists/raid/msg48910.html
and numerous customer reported problems.V2:
- Removed unneeded break; in both case-statements
- Returned the error checking on call to lstatSigned-off-by Nigel Croxon <[email protected]>--- Grow.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)Grow.c +0
-0@@ -1135,6 +1135,15 @@ int reshape_open_backup_file(char *backup_file,unsigned int dev;int i;
Grow.c int reshape_open_backup_file(char *backup_file, · line 1146
Quoted 10 lines
Grow.c +9
-0+if (lstat (backup_file, &stb) !=-1 ) { +switch (stb.st_mode &S_IFMT ) { +case S_IFLNK : +return 1 ; +default : +break ; + } + } +
Sorry for being a pita on this, but in this case you do the thing if the lstat completes correctly, but what if it fails? In that case we should error out rather than just continuing.
Jes
Quoted 41 lines · Jes Sorensen
Quoted 26 lines · Nigel Croxon
This problem came in, as the user did not specify a full path with the
backup_fileoption when growing an RAID5 array to RAID6. When the full path is specified, the symbolic link is created properly (/run/mdadm/backup_file-mdX). But the code did not support the symbolic link when looking for thebackup_file. Added two checks for symlink.This addresses https://www.spinics.net/lists/raid/msg48910.html
and numerous customer reported problems.V2:
- Removed unneeded break; in both case-statements
- Returned the error checking on call to lstatSigned-off-by Nigel Croxon <[email protected]>--- Grow.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)Grow.c +0
-0@@ -1135,6 +1135,15 @@ int reshape_open_backup_file(char *backup_file,unsigned int dev;int i;Grow.c int reshape_open_backup_file(char *backup_file, · line 1146
Quoted 10 lines
Grow.c +9
-0+if (lstat (backup_file, &stb) !=-1 ) { +switch (stb.st_mode &S_IFMT ) { +case S_IFLNK : +return 1 ; +default : +break ; + } + } +Sorry for being a pita on this, but in this case you do the thing if the lstat completes correctly, but what if it fails? In that case we should error out rather than just continuing.
Quoted 2 lines
Jes
There are two processes running in the reshape_array routine, the original, where the user entered the mdadm grow parameter. And the second, forked to call systemd mdadm-grow-continue@service. It's in the original call we want the code to continue rather than fail. It needs to create the backup_file in the FS before the systemd thread runs.
-Nigel
Quoted 42 lines · Nigel Croxon
Quoted 40 lines · Jes Sorensen
Quoted 25 lines · Nigel Croxon
This problem came in, as the user did not specify a full path with the
backup_fileoption when growing an RAID5 array to RAID6. When the full path is specified, the symbolic link is created properly (/run/mdadm/backup_file-mdX). But the code did not support the symbolic link when looking for thebackup_file. Added two checks for symlink.This addresses https://www.spinics.net/lists/raid/msg48910.html
and numerous customer reported problems.V2:
- Removed unneeded break; in both case-statements
- Returned the error checking on call to lstatSigned-off-by Nigel Croxon <[email protected]>---
Grow.c| 21 +++++++++++++++++++--1 file changed, 19 insertions(+), 2 deletions(-)Grow.c +0
-0@@ -1135,6 +1135,15 @@ int reshape_open_backup_file(char *backup_file, unsigned int dev;Grow.c int reshape_open_backup_file(char *backup_file, · line 1145
Quoted 10 lines
Grow.c +8
-0int i; + if (lstat(backup_file, &stb) != -1) { + switch (stb.st_mode & S_IFMT) { + case S_IFLNK: + return 1; + default: + break; + } + } +Sorry for being a pita on this, but in this case you do the thing if the lstat completes correctly, but what if it fails? In that case we should error out rather than just continuing.
Quoted 6 lines
Quoted 2 lines
Jes
There are two processes running in the
reshape_arrayroutine, the original, where the user entered the mdadm grow parameter. And the second, forked to call systemd mdadm-grow-continue@service. It's in the original call we want the code to continue rather than fail. It needs to create thebackup_filein the FS before the systemd thread runs.-Nigel
Jes,
Do you have more questions? an alternate solution?
-Nigel
Quoted 51 lines · Nigel Croxon
Quoted 50 lines · Nigel Croxon
Quoted 40 lines · Jes Sorensen
Quoted 25 lines · Nigel Croxon
This problem came in, as the user did not specify a full path with the
backup_fileoption when growing an RAID5 array to RAID6. When the full path is specified, the symbolic link is created properly (/run/mdadm/backup_file-mdX). But the code did not support the symbolic link when looking for thebackup_file. Added two checks for symlink.This addresses https://www.spinics.net/lists/raid/msg48910.html
and numerous customer reported problems.V2:
- Removed unneeded break; in both case-statements
- Returned the error checking on call to lstatSigned-off-by Nigel Croxon <[email protected]>---
Grow.c| 21 +++++++++++++++++++--1 file changed, 19 insertions(+), 2 deletions(-)Grow.c +0
-0@@ -1135,6 +1135,15 @@ int reshape_open_backup_file(char *backup_file, unsigned int dev;Grow.c int reshape_open_backup_file(char *backup_file, · line 1145
Quoted 10 lines
Grow.c +8
-0int i; + if (lstat(backup_file, &stb) != -1) { + switch (stb.st_mode & S_IFMT) { + case S_IFLNK: + return 1; + default: + break; + } + } +Sorry for being a pita on this, but in this case you do the thing if the lstat completes correctly, but what if it fails? In that case we should error out rather than just continuing.
Quoted 2 lines
Jes
There are two processes running in the
reshape_arrayroutine, the original, where the user entered the mdadm grow parameter. And the second, forked to call systemd mdadm-grow-continue@service. It's in the original call we want the code to continue rather than fail. It needs to create thebackup_filein the FS before the systemd thread runs.
Quoted 5 lines
Quoted 2 lines
-Nigel
Jes,
Do you have more questions? an alternate solution?
I don't like ignoring error codes like this. As a bare minimum it should be documented, or we should call in with an argument to decide whether or not to stat the file in the first place.
Cheers,
Jes