Skip to contentSkip to conversation

powerpc/mpc85xx: Add Cyrus P5040 device tree source

PATCH In review Darren Stevens 2 participants 4 messages May 7, 2020 – May 14, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 5/5 powerpc/mpc85xx: Add Cyrus P5040 device tree source

The Cyrus P5040 does not currently have a dts file in Linux, Add one.

---
 arch/powerpc/boot/dts/fsl/cyrus_p5040.dts | 235 ++++++++++++++++++++++++++++++
 1 file changed, 235 insertions(+)
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +235 -0
new file mode 100644
index 0000000..596ee19
@@ -0,0 +1,235 @@
+/*
+ * Cyrus 5040 Device Tree Source, based on p5040ds.dts
+ *
+ * Copyright 2020 Darren Stevens
+ *
+ * p5040ds.dts Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ */
+
+/include/ "p5040si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS5040";
+	compatible = "varisys,CYRUS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases{
+		ethernet0 = &enet4;
+		ethernet1 = &enet10;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x200000>;
+	};
+
+	qportals: qman-portals@ff4200000 {
+		ranges = <0x0 0xf 0xf4200000 0x200000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+		};
+
+		i2c@118100 {
+		};
+
+		i2c@119100 {
+			rtc@6f {
+				compatible = "microchip,mcp7941x";
+				reg = <0x6f>;
+			};
+		};
+
+		gpio-poweroff {
+			compatible = "gpio-poweroff";
+			gpios = <&gpio0 3 1>;
+		};
+
+		gpio-restart {
+			compatible = "gpio-restart";
+			gpios = <&gpio0 2 1>;
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			hdd {
+				label = "Disk activity";
+				gpios = <&gpio0 5 0>;
+				linux,default-trigger = "disk-activity";
+			};
+		};
+
+		fman@400000 {
+			mdio@e1120 {
+				phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				phy7: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			ethernet@e0000 {
+				status = "disabled";
+			};
+
+			ethernet@e2000 {
+				status = "disabled";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+
+			ethernet@e6000 {
+				status = "disabled";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy3>;
+				phy-connection-type = "rgmii";
+			};
+
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				status = "disabled";
+			};
+
+			ethernet@e2000 {
+				status = "disabled";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+
+			ethernet@e6000 {
+				status = "disabled";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "rgmii";
+			};
+
+		};
+
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xffa00000 0x00040000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		reg = <0xf 0xfe201000 0 0x1000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "p5040si-post.dtsi"
#1 lore raw

arch/powerpc/boot/dts/fsl/cyrus_p5040.dts line 41

Quoted 6 lines · Darren Stevens
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +5 -0
+/include/ "p5040si-pre.dtsi"
+
+/ {
+	model = "varisys,CYRUS5040";
+	compatible = "varisys,CYRUS";

Is this board 100% compatible with the Cyrus P5020 board, down to every last quirk, except for the SoC plugged into it? If not, they shouldn't have the same compatible. If they are, then couldn't everything in this file but the SoC include be moved to a dtsi shared with cyrus_p5020.dts?

arch/powerpc/boot/dts/fsl/cyrus_p5040.dts line 49

Quoted 8 lines
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +8 -0
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases{
+		ethernet0 = &enet4;
+		ethernet1 = &enet10;
+	};

Space after "aliases"

-Scott

#2 lore raw

Hello Scott

Quoted 12 lines · Scott Wood

arch/powerpc/boot/dts/fsl/cyrus_p5040.dts line 41

Quoted 6 lines · Darren Stevens
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +5 -0
+/include/ "p5040si-pre.dtsi"
+
+/ {
+    model = "varisys,CYRUS5040";
+    compatible = "varisys,CYRUS";

Is this board 100% compatible with the Cyrus P5020 board, down to every last quirk, except for the SoC plugged into it? If not, they shouldn't have the same compatible. If they are, then couldn't everything in this file but the SoC include be moved to a dtsi shared with cyrus_p5020.dts?

It's not 100% compatible, the mdio ports map to different fman ports, but both as are 'corenet generic' boards, I added varisys,CYRUS so it would be detected in corenet_generic.c - support for the 5020 was added by Andy Flemming, I've just tried to copy what he did.

I can add another entry to the table, but do we realy want a separate entry in the table for every supported board rather than using the device tree for similar boards?

It would be nice to get these sorted, the dts files are the last bits to make these fully supported in Linux.

Quoted 6 lines

arch/powerpc/boot/dts/fsl/cyrus_p5040.dts line 49

Quoted 4 lines
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +4 -0
+    aliases{
+        ethernet0 = &enet4;
+        ethernet1 = &enet10;
+    };

Space after "aliases"

Opps, will be fixed on next version

Thanks
Darren

#3 lore raw
Quoted 19 lines · Darren Stevens

Hello Scott

Quoted 15 lines · Scott Wood

arch/powerpc/boot/dts/fsl/cyrus_p5040.dts line 41

Quoted 6 lines · Darren Stevens
arch/powerpc/boot/dts/fsl/cyrus_p5040.dts new file +5 -0
+/include/ "p5040si-pre.dtsi"
+
+/ {
+    model = "varisys,CYRUS5040";
+    compatible = "varisys,CYRUS";

Is this board 100% compatible with the Cyrus P5020 board, down to every last
quirk, except for the SoC plugged into it? If not, they shouldn't have the
same compatible. If they are, then couldn't everything in this file but the
SoC include be moved to a dtsi shared with cyrus_p5020.dts?

Quoted 8 lines

It's not 100% compatible, the mdio ports map to different fman ports, but both as are 'corenet generic' boards, I added varisys,CYRUS so it would be detected in corenet_generic.c - support for the 5020 was added by Andy Flemming, I've just tried to copy what he did.

I can add another entry to the table, but do we realy want a separate entry in the table for every supported board rather than using the device tree for similar boards?

A separate compatible for each board is generally what we've done, as it allows for the possibility of board-specific quirks. At least it's just a table entry; back in the day it used to be a separate file. :-P

That said, if you're pretty sure that all potentially relevant differences are described elsewhere in the device tree, I wouldn't mind too much if it becomes:

	compatible = "varisys,CYRUS5040", "varisys,CYRUS";

-Scott